Floor Boxes Section L Hubbell SystemOne Multimedia

Floor Boxes Section L Hubbell SystemOne Multimedia
Floor Boxes
Section L
Floor Boxes
Index
Product
Page
Floor Boxes and Accessories
Hubbell Floor Boxes Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-2
The Hubbell SystemOne Floor Box Family . . . . . . . . . . . . . . . . . . . . . . . . . . L-4
Hubbell SystemOne Universal Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-5
Hubbell SystemOne Metal and Non-Metallic Concrete Floor Boxes . . . . . . L-6
Hubbell SystemOne Sub-Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-7
Flush Round Single or Multi-Service Non-Metallic Concrete Floor Box . . . . L-8
Flush Round Single Service Metal Concrete Floor Boxes . . . . . . . . . . . . . . . L-9
Flush Rectangular Non-Metallic Concrete Floor Boxes . . . . . . . . . . . . . . . . L-10
Flush Rectangular Cast Iron Concrete Floor Boxes . . . . . . . . . . . . . . . . . . . L-12
Flush Rectangular Stamped Steel Concrete Floor Boxes . . . . . . . . . . . . . . L-13
Recessed 2-Gang Concrete Floor Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . L-14
Recessed 4- and 8-Gang Concrete Floor Boxes . . . . . . . . . . . . . . . . . . . . . L-15
Recessed 6-Gang Concrete Floor Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . L-16
Recessed 7- and 11-Gang Concrete Floor Boxes . . . . . . . . . . . . . . . . . . . . L-17
Flush Floor Boxes for Wooden Floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-18
Flush Residential Non-Metallic Concrete Floor Box . . . . . . . . . . . . . . . . . . L-19
Flush Residential Floor Boxes for Wooden Floors . . . . . . . . . . . . . . . . . . . . L-20
Above-Floor Service Fittings (Single Service) . . . . . . . . . . . . . . . . . . . . . . . L-21
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-22
Hubbell Floor Box Cover to Receptacle Compatibility Chart . . . . . . . . . . . L-24
Hubbell SystemOne Configuration Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . L-25
Convention Center Utility Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-26
Metallic Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-27
Dimensional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-28
Hubbell SystemOne
Multimedia
Convention Center
Utility Box
CONNEXION Zone
Distribution System
CONNEXION Modular Wiring Zone System . . . . . . . . . . . . . . . . . . . . . . . . . . . L-29
System Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-30
CONNEXION – Wiring Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-31
System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-32
Unloaded Raised Access Floor Boxes and Face Plates . . . . . . . . . . . . . . . L-33
Custom Pre-Wired Access Floor Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-34
Furniture and Work Surface Connectivity Boxes . . . . . . . . . . . . . . . . . . . . . . L-35
Table Top Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-36
Furniture Connectivity Boxes and Face Plates . . . . . . . . . . . . . . . . . . . . . . L-37
Pre-Wired Work Surface Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-38
Pre-Wired Work Surface Elite Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-39
Furniture and Work
Surface Boxes
Hubbell Multi-Connect Wall Boxes
Multi-Connect – Recessed Wall Boxes and Flanges . . . . . . . . . . . . . . . . . . L-40
Multi-Connect – Screw and Snap-In Modular Face Plates . . . . . . . . . . . . . L-40
Multi-Connect – Dimensional Information . . . . . . . . . . . . . . . . . . . . . . . . . . L-41
www.hubbell-wiring.com
Index
Hubbell AV Ceiling and Wall Enclosures
AV Ceiling Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-42
AV In-Wall Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-42
L-1
Hubbell Floor Boxes
Complies with UL514A
Featuring the unique capabilities of Hubbell’s SystemOne universal cover and
sub-plate design, Hubbell has expanded its floor box offering to provide
industry leading flexibility while accommodating an extensive range of
applications . Hubbell SystemOne is constructed to give
customers the ability to create personal solutions for
their most demanding, power, data and
audio/video requirements .
In addition, Hubbell
continues to
offer a complete
variety of traditional
flush and recessed
floor box options .
Whatever your
requirement, Hubbell
has a solution . With
Hubbell SystemOne
fire-rated pokethrough products that
offer the same unique
advantages, Hubbell’s
entire delivery system
package is second to none
in providing a consistent,
aesthetic and functional
solution for your power, data
and audio/video needs .
Hubbell SystemOne Floor Box Applications…
Multi-Service Applications
This Hubbell SystemOne sub-plate
incorporates a standard Style Line®
decorator opening, which can
be used for an active multimedia
device . In addition, a 20A outlet is
supplied for power and two keystone
openings for voice/data services .
Multimedia Applications
Other Hubbell SystemOne subplates are designed to meet the
growing needs of the audio and
video markets . Some sub-plates
provide power outlets with Hubbell’s
audio/video products including
15-pin SVGA, RCA, S-Video, 3 .5mm
stereo, HDMI and XLR microphone
jacks . Other sub-plates can
accommodate Extron® Electronics
MAAP and AAP series audio/video
modules, as well as FSR IPS plates .
Extron® is a registered trademark of Extron Electronics.
L-2
www.hubbell-wiring.com
4X4 Applications
Provides maximum power capacity
for flush, multi-service applications .
This sub-plate features a pre-wired
four outlet 20A, 125V receptacle
and four openings for flush mount
Hubbell modular jacks and audio/
video Snap Fit connectors .
Receptacle wiring permits dualcircuit, as well as isolated ground
applications .
Complies with UL514A
Traditional Floor Boxes…
Flush Applications
Hubbell offers a wide variety of
traditional solutions including
single and multi-gang cast iron,
stamped steel and non-metallic
floor boxes in both round and
rectangular designs . These boxes
can be finished with either brass
or aluminum covers and flanges to
match any office décor . All Hubbell
floor box assemblies exceed UL
scrub water exclusion requirements .
Recessed Applications
For applications where recessed
connections are desired, Hubbell
has a complete line of recessed
stamped steel and cast iron floor
boxes, from two to eleven gangs .
A variety of modular face plates are
available to meet a wide array of
power, data, voice and audio/video
requirements . Carpet and tile cover
assemblies are offered in a variety
of finishes and styles .
www.hubbell-wiring.com
Wooden Floor Applications
Hubbell offers round, single
service and rectangular, multiservice floor boxes for wooden
floor applications . The rectangular
boxes are available in one, two and
three-gang options and feature
removable barriers for maximum
capacity while maintaining
separation of power and low
voltage . A variety of covers and
flanges are available in brushed
aluminum or brass to meet
aesthetic requirements .
L-3
Floor Boxes
Floor Boxes
The Hubbell SystemOne Floor Box Family
Cast Iron
Features
Corrosion resistant for on-grade
applications
Oversized 1½" N.P.T. threaded conduit
access holes for low voltage
1" N.P.T. threaded conduit access
holes for power
S1CFB
Steel
Stamped steel construction
Economical and light weight for
above-grade applications
Concentric knockouts permit various
conduit sizes for both power and
data services
S1SFB
The Hubbell SystemOne Floor Box Family
The Hubbell SystemOne Universal Cover
features ScrubShield® technology that
exceeds UL514 scrub water exclusion
requirements
Convenient cubic inch capacity (cm3)
markings on interior of box
Leveling feet provide before pour
adjustability
Non-metallic riser allows a simple saw cut
for adjustment after pour
Designed to accommodate multi-service
applications with the wide offering of
Hubbell SystemOne sub-plates
Oversized 1½" N.P.T. threaded
data hub
Hubbell SystemOne Metal Floor Boxes are
approved for use in the City of Chicago
¾", 1" concentric knockouts for
power services
Features
Non-corrosive plastic construction
Oversized 1½" data conduit hub for
increased cable capacity and bend
radius
L-4
The Hubbell SystemOne™ Universal
Cover mounts directly to the floor box
riser, eliminating the need for an additional
adapter collar
Accommodates high-capacity
multimedia applications in a 3½"
minimum depth of pour
Non-Metallic
S1PFB
Easily installed, aesthetic and configurable
floor box solution, for open floor plans that
require both power and data services
Supplied with concrete cover and closure
plugs (where applicable)
Steel AV
S1SFBAV
Complies with UL514 A & C
Parallel conduit hubs reduce labor
and material cost, facilitating easier
wire pull
www.hubbell-wiring.com
Economical, easy to install, in-floor delivery
system for open plan spaces
The Hubbell SystemOne Universal Cover
mounts directly to the floor box riser,
eliminating the need for an additional
adapter collar
Concrete cover, conduit reducers and
conduit hub plugs included
Dimensions in Inches (mm)
Floor Boxes
Floor Boxes
Hubbell SystemOne Universal Covers
Universal Flange and Cover Assembly
Carpet
Tile
Aluminum
Finish
Features
Hinged doors open 180 degrees
flush to the carpet flange or tile
Locking studs allow each door to be
secured independently
The universal carpet or tile flange
can be used for Hubbell SystemOne
Floor Boxes and Fire-Rated PokeThroughs
Finishes and colors available:
Brass
Finish
Black
Gray
Features
Hubbell’s modular sub-plate design allows users to economically
upgrade Hubbell SystemOne FRPT and Floor Boxes to
accommodate future moves, adds and changes.
See page L-7 for complete offering.
Datacom and
Power Sub-Plate
Extron® APP/MAPP
and Power Sub-Plate
Dual Style Line®
Decorator Sub-Plate
Twist-Lock®
Sub-Plate
Furniture Feed
Cover, Carpet
Power Devices and Connectivity
Durable cast aluminum construction,
powder coat finish
Hubbell 4X4: four 20A, 125V receptacles,
four keystone openings for voice/data
jacks and flush multimedia connectors
Hubbell X-END™ and Hubbell
iSTATION™ modular connectivity
Accommodates Extron® Electronics
Architectural Series audio/video system
integration products
Accommodates GFCI, surge and
standard Style Line® Decorator
receptacles
Twist-Lock® receptacle with two flush
keystone openings
Large capacity and multi-service furniture
feed applications
Open system sub-plates permit
maximum data flexibility
Features
Hubbell
X-END™
Choose from Hubbell’s industry
leading selection of wiring devices for
power services
Hubbell iSTATION™ connectivity
modules integrate with SystemOne to
provide comprehensive multi-media
solutions
Hubbell X-END™ application cables and
tails allow for more connectivity in a
smaller footprint
Extron® is a registered trademark of Extron Electronics.
Dimensions in Inches (mm)
www.hubbell-wiring.com
L-5
Hubbell SystemOne Universal Covers
4x4 Sub-Plate
Hubbell
iSTATION™
Durable cast aluminum construction
available in black, gray, brass, aluminum
and ivory powder coat finishes
Features ScrubShield® technology that
exceeds UL514 scrub water exclusion
requirements
Provides consistent look and maximum
functionality throughout the installed life
Ivory
Hubbell SystemOne Sub-Plates
Hubbell-Pro™
Receptacles
Complies with UL514 A & C
Floor Boxes
Floor Boxes
Hubbell SystemOne Metal and Non-Metallic
Concrete Floor Boxes
Dimensions Inches (mm)
Complies with UL514 A & C
Cast Iron
Steel
Steel A/V
Non-Metallic
S1CFB*
S1SFB*
S1SFBAV*
S1PFB
Min. Depth of Pour
3 .50" (88 .9)
3 .50" (88 .9)
3 .50" (88 .9)
3 .00" (76 .2)
Adjustability
Fully
Fully
Fully
Fully
Cubic Inch (cm3) Capacity
156 .0 cu . in .
(2556 .4 cm3)
175 .7 cu . in .
(2879 .2 cm3)
177 .5 cu . in .
(2909 .7 cm3)
100 cu . in .
(1638 .7 cm3)
D
D
A
A
C
B
B
Hubbell SystemOne Metal and Non-Metallic Concrete Floor Boxes
Metal
C
Non-Metallic
Dimensions – A
3 .00" (76 .2)
3 .00" (76 .2)
3 .00" (76 .2)
6 .00" (152 .4)
Dimensions – B
7 .26" (184 .4)
7 .50" (190 .5)
7 .50" (190 .5)
5 .58" (141 .7)
Dimensions – C
7 .45" (189 .2)
7 .38" (187 .4)
7 .38" (187 .4)
8 .76" (222 .5)
Dimensions – D (Inside Diameter)
5 .00" (127 .0)
5 .00" (127 .0)
5 .00" (127 .0)
5 .00" (127 .0)
Power Entries
1" N .P .T .
Access Holes
¾", 1"
Concentric KO
¾", 1"
Concentric KO
1" Conduit Hub
Data Entries
1½" N .P .T .
Access Holes
¾", 1", 1¼"
Concentric KO
1½" Threaded
Hub (included)
1½" Conduit Hub



Closure Plugs Included
—


Concrete Cover Included


Reducers
—
—
—
Accepts Hubbell SystemOne
Universal Cover




Cover Mounting Clips Included




Non-Metallic Low Voltage Divider Included
(S1DIV1)




Note: UL File Number E92074.
CSA File Number LR18416.
* S1CFB, S1SFB, S1SFBAV are approved for use in the City of Chicago.
S1PFB reducers included: Qty (2) combo plug/reducers 1" to ¾"
Qty (2) reducers 1½" to 1"
Qty (2) reducers 1½" to ¾"
Qty (2) plugs 1½"
Hubbell SystemOne Universal Covers
Floor Box Accessories
n Cast aluminum construction
Description
Color
Carpet
Tile
Aluminum Finish
Brass Finish
Black
Gray
Ivory
S1CFCAL
S1CFCBRS
S1CFCBL
S1CFCGY
S1CFCI
S1TFCAL
S1TFCBRS
S1TFCBL
S1TFCGY
S1TFCI
L-6
Brass
Finish
Black
Catalog Number
Abandonment Plates
Used to cover abandoned SystemOne Fire-Rated
Poke-Throughs or Floor Boxes .
n Durable powder coat finish
Aluminum
Finish
 (see below)
Gray
Ivory
Black
Gray
Replacement Side by Side Divider
Used to isolate compartments in S1SP, S1SPFFx,
S1SPFFTx, S1SPDU, S1SPDUSL, S1SPDU2IM
and S1SPSL2IM sub-plates . Included with all
SystemOne Floor Boxes .
S1AP4BL
S1AP4GY
S1DIV1
1½" Threaded Hub
For use with S1SFBAV ONLY . Permits feedthrough applications . S1SFBAV floor box includes
one (1) threaded hub .
S1AVHUB15
Replacement Universal Cover Mounting Clips
Used to mount SystemOne Universal Cover to
SystemOne metal and non-metallic floor boxes
(S1CFB, S1SFB, S1SFBAV, S1PFB) . Includes clips
and ground leads for (5) floor boxes. All SystemOne
Floor Boxes include mounting clips .
S1FBCLIP5PK
www.hubbell-wiring.com
Dimensions in Inches (mm)
Hubbell SystemOne Sub-Plates
Description
Catalog Number Description
Style Line® Decorator/GFCI
(2) Style Line® Decorator
openings for power and/or
datacom applications.
3 Non-Metallic
Complies with UL514 A & C
3.5
S1SP
Metal
Hubbell 4 X 4
(4) 20A, 125V receptacles.
(4) Keystone openings for Hubbell
jacks or flush A/V connectors.
Power can be wired as single
or two circuit with isolated
ground capability.
3 Non-Metallic
S1SP4X4
S1SP4X415
S1SP4X430
Single Receptacle + Data
Opening for 20 or 30A TwistLock® receptacle (1.56" OD) and
(2) Keystone openings for Hubbell
jacks or flush A/V connectors.
4
3.5
3 Non-Metallic
3.5
Metal
S1SPDU
Metal
S1SPFFAL
S1SPFFBRS
S1SPFFBL
S1SPFFGY
Aluminum Fin.
Brass Fin.
Black
Gray
S1SP3IM
5
Hubbell DataCom +
Style Line® Decorator
(1) Style Line® Decorator opening,
(2) flush Keystone openings
and 1.5 unit recessed Hubbell
S1SPSL2IM
iSTATION™ opening for data,
voice and A/V applications.
5
Hubbell DataCom
1 unit flush Hubbell iSTATION™
opening and 3-unit recessed
Hubbell iSTATION™ opening
for data, voice, and A/V
applications.
S1SP4IM
S1SPEXT1
4
Extron® or FSR + Power
(1) 20A, 125V receptacle.
Recessed opening for (1) single
Extron® MAAP and (2) single
AAP series adapter plates or
FSR IPS plates.
S1SPEXT2
4
Extron® AAP + Power
(1) 20A, 125V receptacle. (2) flush
Keystone and recessed opening
for (2) single Extron® AAP Series
adapter plates.
4
S1SP4X4PA
S1SPORT
5
4
3 Non-Metallic
3.5
Metal
Aluminum Fin.
Brass Fin.
Black
Gray
Hubbell DataCom + Duplex
(1) Duplex opening, (2) flush
Keystone openings and 1.5 unit
recessed Hubbell iSTATION™
opening for data, voice and
A/V applications.
5
S1SPFFTAL
S1SPFFTBRS
S1SPFFTBL
S1SPFFTGY
S1SPDU2IM
Active Multimedia + Power
Single 20A, 125V receptacle;
(2) flush Keystone openings;
(1) rectangular Style Line® Decorator
opening to accommodate active
multimedia modules or low voltage S1SPAMM20
outlet frames.
Extron® or FSR
Single-Service
Recessed opening for (2) single
Extron® MAAP and (2) single
AAP series adapter plates or
FSR IPS plates.
S1SPEXT3
Ortronics TracJack® + Power
(1) 20A, 125V receptacle.
Recessed bezel for (6) Ortronics
TracJack® modules.
SYSTIMAX® 4 X 4
(4) 20A, 125V receptacles.
(4) Openings for SYSTIMAX®
Connectivity.
4
S1SPDUSL
Metal
5
S1SPTRAC
Siemon MAX® + Power
(1) 20A, 125V receptacle.
Recessed bezel for
(6) Siemon MAX® modules.
S1SP4X4SYS
5
S1SPMAX
Signifies minimum depth of concrete pour in inches for Metal Floor Boxes (S1CFB, S1SFB and S1SFBAV) and Non-Metallic Floor Box (S1PFB).
Note: * Furnished with two screw-in flexible metal conduit connectors. See Section P for complete offering of Hubbell jacks and frames.
Sub-Plate Accessories
Description
Replacement Threaded Conduit Plugs
Used with S1SPFFx and S1SPFFTx ONLY . Sub-plate is
supplied with plugs .
Color
Aluminum Finish
Brass Finish
Black
Gray
1½" Plug
S1FP15AL
S1FP15BRS
S1FP15BL
S1FP15GY
Description
Catalog Number
6-Port Replacement Data Frames
Used with open systems sub-plates . Sub-plate
is supplied with data frame . Siemon MAX® for
use with S1SPMAX sub-plate .
Ortronics TracJack® for use with
S1SPTRAC sub-plate .
S1DFMAX
Black Style Line® decorator blank frame .
2100BK
S1DFTRAC
¾" Plug
S1FP34AL
S1FP34BRS
S1FP34BL
S1FP34GY
Extron® is a registered trademark of Extron Electronics. MAX® is a registered trademark of The Siemon Company. Mini-Com® and Panduit® are registered trademarks
of Panduit Corp. SYSTIMAX® is a registered trademark of CommScope, Inc. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
Dimensions in Inches (mm)
www.hubbell-wiring.com
L-7
Hubbell SystemOne Sub-Plates
Panduit Mini Com® 4 X 4
(4) 20A, 125V receptacles.
(4) Openings for Panduit
Mini-Com Connectivity.
3.5
4.5
Ortronics Series II® + Power
(1) 20A, 125V receptacle.
Recessed opening for (3) 1 unit
Ortronics Series II® modules.
S1SPEXT4
3 Non-Metallic
5
3.5
Extron® or FSR + Power
(1) 20A, 125V receptacle.
Recessed opening for (3) single
Extron® MAAP series adapter
plates or FSR IPS plates.
Catalog Number
Tile Furniture Feed
Cover/Flange*
(1) ¾" and (1) 1½" N.P.T. access
holes for power and/or datacom
applications. Universal Cover not
required. Includes tile flange.
Hubbell DataCom + Power
(1) 20A, 125V receptacle and
3-unit recessed Hubbell
iSTATION™opening for data,
voice, and A/V applications.
S1SPTL
Description
Duplex/Style Line® Decorator
(1) Duplex and (1) Style Line®
Decorator opening for power
and/or datacom applications.
Carpet Furniture Feed
Cover/Flange*
(1) ¾" and (1) 1½" N.P.T. access
holes for power and/or datacom
applications. Universal Cover not
required. Includes carpet flange.
4
Provided with 15 ft. wire leads
Provided with 30 ft. wire leads
Catalog Number
Duplex/Duplex
(2) Duplex openings for power
and/or datacom applications.
Floor Boxes
Floor Boxes
Floor Boxes
Floor Boxes
Flush Round Single or Multi-Service
Non-Metallic Concrete Floor Box
Complies with UL514A
Dimensions Inches (mm)
D
Catalog Number
Adapter
PFBA1A
Required for all applications .
A
B
C
Min. Depth of Pour
Capacity
Dimensions – A
Dimensions – B
Dimensions – C
Dimensions – D
Hubs
Concrete Cover Included
Flush Round Single or Multi-Service Non-Metallic Concrete Floor Box
Description
Closure/Reducer Plugs
PFB1
Low Voltage Divider
3 .00" (76 .2)
100 cubic inches prior to cutting level to floor
(19 .5 cubic inches per inch of depth) .
6 .00" (152 .4)
7 .08" (179 .8)
6 .69" (169 .9)
5 .38" (136 .5)
(2) 1 .0" and (2) ¾" conduit hubs
PFBT1A
Required for use with catalog
number PFB1 when used in multiservice applications . Accepts
Hubbell standard duplex receptacles
or 15A Twist-Lock® duplex
receptacles (HBL4700 series) .
“Y” Adapter
PFBYA1
¾ in . “Y” adapter to feed parallel
runs of ¾ in . conduit .

(2) 1" plugs close off 1" hubs or reduce 1" to ¾"
(2) ¾" plugs close off ¾" hubs or reduce ³⁄₄" to ½"
Note: UL File Number E92074. CSA File Number LR18416.
Flush Round Covers and Flanges
Multi-Service Cover and
Flange Assemblies
Includes floor box cover with
duplex flaps, (2) ½ in. dia. low
voltage feed through holes
and matching carpet flange.
6 .25 in . Diameter
SF39253A
PFBCBRA
PFBCIA
PFBCGYA
Brass
Brown
Non-Metallic
Ivory
Non-Metallic
Gray
Non-Metallic
Single Service Covers
Brass
Aluminum
3 .88 in . Dia .
PFBCBLA
Black
Non-Metallic
S3925
SA3925
S3725
SA3725
S2525
SA2525
S2725
SA2725
S2925
SA2925
S3525
—
Duplex
Flap
Duplex
Screw
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
S3325
—
2¹⁄₈" Single
Receptacle
(Terrazzo Floor)
Metal Carpet Flange
Adapter Ring
Furniture Feed Plate
Use with single service covers for carpet applications .
6 .25 in . Diameter
S3082
SA3082
Use with single service covers for tile applications .
Brass
Brushed Aluminum
S5016
SA5016
Unpainted plate with
1 in . threaded opening .
PFBP1
Brass
Aluminum
Steel
One Piece Brass Cover and Carpet Flange
6 .25 in . Diameter
Note: Adapter ring S5016 is required for mounting
SF series covers onto PFBA1A.
L-8
SF3925
SF2525
SF2725
SF2925
Duplex
Flap
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
www.hubbell-wiring.com
Dimensions in Inches (mm)
Flush Round Single Service
Metal Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Cast Iron
Stamped Steel
D
Floor Boxes
Floor Boxes
A
B
C
Collar Material
Brass
Aluminum
Min. Depth of Pour
Adjustability
Before Pour External
Height Adjustment
After Pour Internal
Height Adjustment
Cubic Inch (cm3) Capacity
B2537
B2506 B2506415
BA2537
–
–
4 .75" (120 .7)
3 .00" (76 .2)
Fully
Fully
–
–
–
4 .00" (101 .6)
Fully
1 .25" (31 .8)
3 .00" (76 .2)
Fully
1 .25" (31 .8)
.38" (9 .5)
.63" (15 .9)
.63" (15 .9)
.38" (9 .5)
.38" (9 .5)
.38" (9 .5)
33 .0 cu . in .
(540 .7 cm3)
3 .05" (77 .5)
4 .84" (122 .9)
4 .84" (122 .9)
4 .19" (106 .4)
(4) ¾"
(4) 1"
–
–
–
–
–
–
36 .0 cu . in .
(590 .0 cm3)
3 .75" (95 .3)
5 .00" (127 .0)
4 .63" (117 .6)
4 .19" (106 .4)
(4) ¾"
–
–
–
50 .8 cu . in .
(832 .5 cm3)
4 .75" (120 .7)
5 .00" (127 .0)
4 .66" (118 .4)
4 .19" (106 .4)
(4) 1¼" (4) 1½"
–
–
–
–
–
–
30 .0 cu . in .
(491 .6 cm3)
2 .87" (72 .9)
4 .84" (122 .9)
4 .84" (122 .9)
4 .19" (106 .4)
(4) ¾"
–
–
–
54 .0 cu . in .
(884 .9 cm3)
3 .88" (98 .6)
6 .00" (152 .4)
4 .81" (122 .2)
4 .19" (106 .4)
–
(1) 1" & (1) ¾"
(1) 1¼" & (1) ¾"
(3) ½" & (2) ¾"
37 .3 cu . in .
(611 .2 cm3)
2 .91" (73 .9)
6 .00" (152 .4)
4 .81" (122 .2)
4 .19" (106 .4)
–
(2) ½" & (1) ¾"
(1) ½" & (1) ½"
(3) ½" & (2) ¾"


–
–






B2527
BA2527


B2529
BA2529
Note: UL File Number E31999.
CSA File Number LR18416.
Suitable for single service applications only.
Single Service Covers
Brass
Aluminum
3 .88 in . Dia .
S3925
SA3925
S3725
SA3725
S2525
SA2525
S2725
SA2725
S2925
SA2925
S3525
—
Duplex
Flap
Duplex
Screw
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
Carpet Flanges
5 .25 in . Diameter
S3182
SA3182
S3079
Brass
Brushed Aluminum
Clear Polycarbonate
6 .25 in . Diameter
S3082
Brass
S3325
—
2¹⁄₈" Single
Receptacle
(Terrazzo Floor)
SA3082
Brushed Alum .
One Piece Brass Cover and Carpet Flange
6 .25 in . Diameter
SF3925
SF2525
SF2725
SF2925
Duplex
Flap
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Dimensions in Inches (mm)
www.hubbell-wiring.com
L-9
Flush Round Single Service Metal Concrete Floor Boxes
Dimensions – A
Dimensions – B
Dimensions – C
Dimensions – D
Threaded Access Holes
Knockouts – Sides
Knockouts – Ends
Knockouts – Bottom
Concrete Cover Included
Closure Plugs Included
B2536 B253641
B2503
BA2536
–
–
3 .75" (95 .3)
3 .75" (95 .3)
Fully
Fully
1 .25" (31 .8)
–
Floor Boxes
Floor Boxes
Flush Rectangular Non-Metallic Concrete
Floor Boxes with Non-Metallic Covers
Complies with UL514C
Dimensions Inches (mm)
Style
1-Gang
2-Gang
3-Gang
PFBRG1*
PFBRG2
PFBRG3
A
Flush Rectangular Non-Metallic Concrete Floor Boxes with Non-Metallic Covers
E
B
C
D
Min. Depth of Pour
3 .00" (76 .2)
3 .00" (76 .2)
Adjustability
Fully
Fully
Cubic Inch
Per Gang
(cm3)
Capacity
Dimensions – A
14 .3 cu . in . (234 .3
per 1" depth
cm3)
3 .00" (76 .2)
Fully
14 .3 cu . in . (234 .3
per 1" depth
cm3)
14 .3 cu . in . (234 .3 cm3)
per 1" depth
6 .00" (152 .4)
6 .00" (152 .4)
6 .00" (152 .4)
10 .04" (255 .0)
Dimensions – B
3 .60" (91 .4)
6 .82" (173 .2)
Dimensions – C
5 .42" (137 .7)
5 .42" (137 .7)
5 .42" (137 .7)
Dimensions – D
6 .90" (175 .3)
6 .90" (175 .3)
6 .90" (175 .3)
11 .87" (301 .5)
Dimensions – E
5 .44" (138 .2)
8 .66" (220 .0)
Hubs
(4) 1¼"
(6) 1¼"
(8) 1¼"
Reducers
(4) 1" to ¾" and (4) 1¼" to 1"
(6) 1" to ¾" and (6) 1¼" to 1"
(8) 1" to ¾" and (8) 1¼" to 1"
Concrete Cover Included
Closure Plugs Included


Removable LV Barrier
–






!
NEWth 1¼"or
i
w
bs f
Nowuit hu acity
d
p
conore ca
m
Note: UL File Number E92074.
CSA File Number LR18416.
* Suitable for single service applications only.
Flush Rectangular Non-Metallic Covers and Flanges
Cover with Duplex and Style Line®
decorator inserts included
Required Components for Carpet Applications
Carpet Flanges
Number of Gangs
Dimensions
Black
Brown
Gray
Ivory
1-Gang
6 .00" x 4 .88"
PFBRFBL1
PFBRFBR1
PFBRFGY1
PFBRFI1
2-Gang
6 .00" x 8 .13"
PFBRFBL2
PFBRFBR2
PFBRFGY2
PFBRFI2
3-Gang
6 .00" x 11 .35"
PFBRFBL3
PFBRFBR3
PFBRFGY3
PFBRFI3
One Required per Gang
4 .15" x 2 .97"
PFBR826BLA
PFBR826BRA
PFBR826GYA
PFBR826IA
Duplex
Insert
Required Components for Tile Applications
Cover
Style Line®
Decorator Insert
Mounting Collar
Cover Frame
Cover with Duplex and Style Line®
decorator inserts included – Gray
One Required per Gang
One Required per Gang
Dim . 4 .47" x 3 .25"
PFBRFRA
One Required per Gang
Cover Dim . 4 .15" x 2 .97"
PFBR826GYA
PFBRMC
Duplex
Insert
L-10
www.hubbell-wiring.com
Cover
Style Line®
Decorator Insert
Dimensions in Inches (mm)
Floor Boxes
Floor Boxes
Flush Rectangular Non-Metallic Concrete
Floor Boxes with Metal Covers
Complies with UL514C
Dimensions Inches (mm)
Style
1-Gang
2-Gang
3-Gang
PFBRG1*
PFBRG2
PFBRG3
A
E
B
C
D
Min. Depth of Pour
3 .00" (76 .2)
3 .00" (76 .2)
Adjustability
Fully
Fully
Cubic Inch
Per Gang
(cm3)
Capacity
14 .3 cu . in . (234 .3
per 1" depth
Dimensions – A
cm3)
3 .00" (76 .2)
Fully
14 .3 cu . in . (234 .3
per 1" depth
cm3)
14 .3 cu . in . (234 .3 cm3)
per 1" depth
6 .00" (152 .4)
6 .00" (152 .4)
10 .04" (255 .0)
Dimensions – B
3 .60" (91 .4)
6 .82" (173 .2)
Dimensions – C
5 .42" (137 .7)
5 .42" (137 .7)
5 .42" (137 .7)
Dimensions – D
6 .90" (175 .3)
6 .90" (175 .3)
6 .90" (175 .3)
11 .87" (301 .5)
Dimensions – E
5 .44" (138 .2)
8 .66" (220 .0)
Hubs
(4) 1¼"
(6) 1¼"
(8) 1¼"
Reducers
(4) 1" to ¾" and (4) 1¼" to 1"
(6) 1" to ¾" and (6) 1¼" to 1"
(8) 1" to ¾" and (8) 1¼" to 1"
Concrete Cover Included
Closure Plugs Included


Removable LV Barrier
–






!
NEWth 1¼"or
i
w
bs f
Nowuit hu acity
d
p
conore ca
m
Note: UL File Number E92074.
CSA File Number LR18416.
* Suitable for single service applications only.
Flush Rectangular Metal Covers and Flanges
Required Components for Carpet and Tile Applications
Adapter Collar – One Required per Gang
Gray
PFBRAC
Adapter Frame with Grounding Lug – One Required per Gang
Dim . 4 .36" x 3 .20"
Brass
S5017G
Aluminum
SA5017G
Covers – One Required per Gang
Brass
Aluminum
Dimensions
4 .15" x 2 .99"
S3825
SA3825
S3625
SA3625
Duplex
Flap
Duplex
Screw
S3826
SA3826
S2425
SA2425
2¹⁄₈" x ¾"
Style Line®
Decorator Opening Combination
S2625
SA2625
S2825
—
S3813
SA3813
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Blank
Carpet Flanges (Not Required for Tile Applications)
Tapered Flange
Number of Gangs
Dimensions
Brass
Aluminum
Dimensions in Inches (mm)
1-Gang
6 .00" x 4 .85"
SB3083
SA3083
2-Gang
6 .00" x 8 .13"
SB3084
SA3084
www.hubbell-wiring.com
3-Gang
6 .00" x 11 .34"
SB3085
SA3085
L-11
Flush Rectangular Non-Metallic Concrete Floor Boxes with Metal Covers
6 .00" (152 .4)
Floor Boxes
Floor Boxes
Flush Rectangular Cast Iron
Concrete Floor Boxes
Dimensions Inches (mm)
Style
Cast Iron
1-Gang Deep
D
2-Gang Deep
1-Gang Shallow
3-Gang Deep
2-Gang
Shallow
3-Gang
Shallow
B4214
–
B4314
–
E
A
C
B
Collar Material
Brass
Aluminum
Flush Rectangular Cast Iron Concrete Floor Boxes
Complies with UL514A
Min. Depth of Pour
B2436* B243641* B4233 B423341 B4333 B433361
B2437*
BA2436* –
BA4233
–
–
BA4333
–
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
3 .00" (76 .2)
Adjustability
Fully
B2414*
–
2 .00" (50 .8)
2 .00" (50 .8)
2 .00" (50 .8)
Fully
Fully
Fully
Semi
Semi
Semi
Before Pour External 1 .25" (31 .8)
Height Adjustment
1 .25" (31 .8)
1 .25" (31 .8)
1 .25" (31 .8)
1 .25" (31 .8)
1 .25" (31 .8)
1 .25" (31 .8)
After Pour Internal
Height Adjustment
.38" (9 .5)
.63" (15 .9)
.63" (15 .9)
.38" (9 .5)
–
–
–
Cubic Inch (cm3)
Capacity Per Gang
33 .0 cu . in .
(540 .7 cm3)
36 .5 cu . in .
(598 .1 cm3)
34 .8 cu . in .
(570 .3 cm3)
30 .0 cu . in .
(491 .7 cm3)
16 .0 cu . in .
(262 .2 cm3)
16 .0 cu . in .
(262 .2 cm3)
16 .0 cu . in .
(262 .2 cm3)
Dimensions – A
3 .20" (81 .3)
3 .38" (85 .9)
3 .38" (85 .9)
2 .90" (73 .7)
2 .00" (50 .8)
2 .00" (50 .8)
2 .00" (50 .8)
Dimensions – B
4 .69" (119 .1)
4 .84" (122 .9)
4 .90" (122 .5)
4 .69" (119 .1) 5 .46" (138 .7) 5 .46" (138 .7) 5 .46" (138 .7)
Dimensions – C
4 .69" (119 .1)
8 .06" (204 .7)
11 .41" (289 .8)
4 .69" (119 .1) 4 .19" (106 .4) 7 .49" (190 .2) 10 .7" (271 .8)
Dimensions – D
4 .36" (110 .7)
4 .36" (110 .7)
4 .36" (110 .7)
4 .36" (110 .8) 4 .38" (111 .3) 4 .38" (111 .3) 4 .38" (111 .3)
Dimensions – E
3 .19" (81 .0)
6 .42" (163 .1)
9 .64" (244 .9)
3 .20" (81 .3)
3 .19" (81 .0)
6 .38" (162 .1) 9 .56" (242 .8)
Threaded Access
Holes
(4) ¾"
(6) ¾"
(8) ¾"
(4) ¾"
(2) ¾"
(4) ¾"
Concrete Cover
Included
Closure Plugs
Included
Removable
LV Barrier
(4) 1"
(4) 1" &
(2) ¾"
(6) 1" &
(2) ¾"
(6) ¾"














–


–
–
–
–
Note: UL File Number E92074.
CSA File Number LR18416.
* Suitable for single service applications only.
Flush Rectangular Floor Box Covers
Brass
Aluminum
Dimensions
4 .15" x 2 .99"
S3825
SA3825
S3625
SA3625
Duplex
Flap
Duplex
Screw
S3826
SA3826
S2425
SA2425
2¹⁄₈" x ¾"
Style Line®
Decorator Opening Combination
S2625
SA2625
S2825
—
S3425
—
S3813
SA3813
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
Blank
Carpet Flanges
Tapered Flange
Number of Gangs
Dimensions
Brass
Aluminum
Clear Polycarbonate
L-12
1-Gang
6 .00" x 4 .85"
SB3083
SA3083
S3083
2-Gang
6 .00" x 8 .13"
SB3084
SA3084
S3084
www.hubbell-wiring.com
3-Gang
6 .00" x 11 .34"
SB3085
SA3085
S3085
Dimensions in Inches (mm)
Flush Rectangular Stamped Steel
Concrete Floor Boxes
Dimensions Inches (mm)
Style
D
Complies with UL514A
Stamped Steel
1-Gang
Deep
2-Gang
Deep
3-Gang
Deep
1-Gang
Shallow
2-Gang
Shallow
3-Gang
Shallow
1-Gang
Deep
1-Gang
Shallow
B2431*
BA2431*
B2432
BA2432
B2433
BA2433
B2421*
BA2421*
B2422
BA2422
B2423
BA2423
B2427*
–
B2429*
–
2 .75" (69 .9)
Floor Boxes
Floor Boxes
E
A
C
B
Collar Material
Brass
Aluminum
Min. Depth of Pour
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
2 .75" (69 .9)
Adjustability
Fully
Before Pour External 1 .25" (31 .8)
Height Adjustment
Fully
1 .25" (31 .8)
Fully
1 .25" (31 .8)
Fully
Fully
Fully
Fully
1 .25" (31 .8) 1 .25" (31 .8) 1 .25" (31 .8) 1 .25" (31 .8)
2 .75" (69 .9)
4 .00" (101 .6) 3 .00" (76 .2)
Fully
1 .25" (31 .8)
After Pour Internal
Height Adjustment
.50" (12 .7)
.50" (12 .7)
.50" (12 .7)
.50" (12 .7)
.50" (12 .7)
.50" (12 .7)
.38" (9 .5)
.38" (9 .5)
Cubic Inch (cm3)
Capacity Per Gang
60 .0 cu . in .
(983 .2 cm3)
52 .8 cu . in .
(865 .2 cm3)
50 .8 cu . in .
(832 .5 cm3)
39 .5 cu . in .
(647 .3 cm3)
35 .0 cu . in .
(573 .5 cm3)
34 .0 cu . in .
(557 .2 cm3)
54 .0 cu . in .
(884 .9 cm3)
37 .3 cu . in .
(611 .2 cm3)
Dimensions – A
3 .72" (94 .5)
3 .72" (94 .5)
3 .72" (94 .5)
2 .74" (69 .6)
2 .74" (69 .6)
2 .74" (69 .6)
3 .90" (99 .1)
2 .81" (71 .4)
Dimensions – B
4 .81" (122 .2)
4 .81" (122 .2)
4 .81" (122 .2)
4 .81" (122 .2)
4 .81" (122 .2)
4 .81" (122 .2)
4 .81" (122 .2)
4 .81" (122 .2)
Dimensions – C
6 .00" (152 .4) 9 .25" (235 .0) 12 .50" (317 .5) 6 .00" (152 .4) 9 .25" (235 .0) 12 .50" (317 .5) 6 .00" (152 .4) 6 .00" (152 .4)
4 .38" (111 .3)
4 .38" (111 .3)
Dimensions – E
3 .19" (81 .0)
6 .44" (163 .6) 9 .67" (245 .6) 3 .19" (81 .0)
Knockouts – Sides
(1) ¾",1",1¼" (2) ¾",1",1¼" (3) ¾",1",1¼" (2) ½",(1) ¾" (4) ½",(1) ¾" (6) ½",(1) ¾" (1) ½",(1) 1¼" (2) ½",(1) ¾"
Knockouts – Ends
(1) ¾",1",1¼" (1) ¾",1",1¼" (1) ¾",1",1¼" (1) ½",(1) ¾" (2) ½",(1) ¾" (2) ½",(1) ¾" (1) ¾",(1) 1"
4 .38" (111 .3)
4 .38" (111 .3)
4 .38" (111 .2)
4 .38" (111 .2)
6 .44" (163 .6) 9 .67" (245 .6) 3 .19" (81 .0)
4 .38" (111 .3)
4 .38" (111 .3)
3 .19" (81 .0)
(1) ½",(1) ¾"
Knockouts – Bottom (2) ¾",1",1¼" (4) ¾",1",1¼" (6) ¾",1",1¼" (2) ¾",1",1¼" (4) ¾",1",1¼" (6) ¾",1",1¼" (3) ½",(2) ¾" (3) ½",(2) ¾"
Concrete Cover
Included








Closure Plugs
Included
–
–
–
–
–
–
–
–
Removable
LV Barrier
–


–


–
–
Note: UL File Number E92074.
CSA File Number LR18416.
* Suitable for single service applications only.
Flush Rectangular Floor Box Covers
Brass
Aluminum
Dimensions
4 .15" x 2 .99"
S3825
SA3825
S3625
SA3625
Duplex
Flap
Duplex
Screw
S3826
SA3826
S2425
SA2425
2¹⁄₈" x ¾"
Style Line®
Decorator Opening Combination
S2625
SA2625
S2825
—
S3425
—
S3813
SA3813
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
Blank
Carpet Flanges
Tapered Flange
Number of Gangs
Dimensions
Brass
Aluminum
Clear Polycarbonate
Dimensions in Inches (mm)
1-Gang
6 .00" x 4 .85"
SB3083
SA3083
S3083
2-Gang
6 .00" x 8 .13"
SB3084
SA3084
S3084
www.hubbell-wiring.com
3-Gang
6 .00" x 11 .34"
SB3085
SA3085
S3085
L-13
Flush Rectangular Stamped Steel Concrete Floor Boxes
Dimensions – D
Floor Boxes
Floor Boxes
Recessed 2-Gang Concrete Floor Boxes
Dimensions Inches (mm)
Complies with UL514A
Stamped Steel
Cast Iron
2-Gang
2-Gang
3SFBSS
3SFBC
Style
A
B
C
Min. Depth of Pour
3 .00" (76 .2)
3 .00" (76 .2)
Adjustability
Before pour
Before pour
22 .4 cu . in .
(367 .1 cm3)
21 .6 cu . in .
(354 .0 cm3)
2 .88" (73 .2)
3 .00" (76 .2)
(cm3)
Cubic Inch
Per Chamber
Capacity
Dimensions – A
Dimensions – B
12 .20" (309 .9)
12 .88" (327 .2)
Dimensions – C
5 .52" (140 .2)
6 .00" (152 .4)
Threaded Access Holes
Sides (2) ¾"
Ends (1) 1¼"
Center Area (1) 1¼" (each side)
–
Sides (2) ¾"
Ends (1) 1"
Center Area (1) Concentric 1",
1¼" (each side)
Knockouts
Concrete Cover Included

Closure Plugs Included
–
Face Plates Included
–


(1) 3SFBRP and (1) 3SFBTP
(1) 3SFBRP and (1) 3SFBTP
Note: UL File Number E31999.
CSA File Number LR18416.
Recessed 2-Gang Concrete Floor Boxes
Accessories
CFBOGPAN4
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level . This accessory is installed prior to the concrete
pour and provides a barrier between the soil . The on-grade
barrier comes with leveling feet and anchor points . Can be
used with other Hubbell floor boxes.
Pour Pan Dimensions:
15 .75 in . sq .
4 in . depth
Floor Box Covers with Carpet Recess
Reinforced Non-Metallic Cover
Dimensions
11 .88" x 5 .20"
3SFBCBRA
3SFBCIA
3SFBCGYA
3SFBCBKA
Brown
Ivory
Gray
Black
Face Plates
3SFBRP
3SFBDS
3SFBS
3SFBB
3SFBTP
3SFBIM
Duplex
Knockout
Style Line®
Decorator Opening
Single Receptacle
Opening
(1 .39" boss dia .)
Blank
Voice/Data
(2) Jack Knockouts
( .6" x .75")
3-Unit iSTATION™
Opening
(See Section P for
module options)
L-14
www.hubbell-wiring.com
Dimensions in Inches (mm)
Recessed 4- and 8-Gang Concrete Floor Boxes
Dimensions Inches (mm)
Style
Complies with UL514A
Stamped Steel
4-Gang Shallow
4-Gang Deep
Cast Iron
8-Gang Deep
4-Gang Shallow
Floor Boxes
Floor Boxes
A
B
C
HBLCFB401BASE
HBLCFB301BASE
HBLCFB501BASE
HBLCFB401CB
Min. Depth of Pour
4 .25" (107 .6)
3 .00" (76 .2)
5 .25" (133 .4)
3 .25" (82 .6)
Adjustability
Before pour
Before pour
Before pour
Before pour
Cubic Inch (cm3) Capacity
Per Chamber
29 .5 cu . in .
(483 .4 cm3)
25 .5 cu . in .
(417 .9 cm3)
49 .5 cu . in .
(811 .2 cm3)
25 .5 cu . in .
(417 .9 cm3)
Dimensions – A
4 .0" (101 .6)
2 .63" (66 .8)
5 .13" (130 .3)
3 .13" (79 .5)
Dimensions – B
10 .0" (254 .0)
10 .0" (254 .0)
10 .0" (254 .0)
10 .0" (254 .0)
Dimensions – C
10 .0" (254 .0)
10 .0" (254 .0)
10 .0" (254 .0)
10 .0" (254 .0)
–
–
–
Threaded Access Holes –
Per Chamber
(1) Concentric ½", ¾"
(1) Concentric ¾", 1"
(1) 1¼"
Knockouts – Per Chamber
(3) Concentric ½", ¾"
(2) 1"
(1) Concentric ½", ¾"
(1) Concentric ¾", 1"
(1) 1¼"
Concrete Cover Included



Closure Plugs Included
–
–
–
–


Note: UL File Number E197203.
CSA File Number LR702145.
Accessories
Die Cast Metal Cover and Flange Assembly
Dimensions 10 .69" x 10 .69"
HBLTCGNTSW
HBLTCGNTBKSW
On-grade Barrier
The on-grade barrier is intended for use on
installations at grade level . This accessory
is installed prior to the concrete pour and
provides a barrier between the soil . The
on-grade barrier comes with leveling feet
and anchor points . Can be used with other
Hubbell floor boxes.
Granite
CFBOGPAN4
Pour Pan Dimensions:
15 .75 in . sq .
4 in . depth
Black
Hubbell – Screw Type Face Plates*
HBLST302SGY
HBLDE301SGY
HBLTO310SGY
HBLTL318SGY
HBLTL319SGY
HBLBL300SGY
HBLIMFSGY
HBL317SGY
Duplex
Style Line®
Decorator
Toggle
Single Receptacle
(1.56" Boss Dia.)
Single Receptacle
(1.39" Boss Dia.)
Blank
3-Unit Hubbell iSTATION™
(See Section P for
module options)
Hubbell
6-Port
Open Systems – Screw Type Face Plates*
HBLAM303SGY HBLAMP313SGY HBLKR314SGY HBLLT309SGY HBLPA308SGY HBLNO309SGY HBLSI305SGY HBLSI315SGY HBLOR306SGY HBLORT322SGY
AMP-ACO
AMP 6-Port
Krone®/Leviton® SYSTIMAX®
Panduit
NORDX® 6-Port
Siemon
Mini-Com® (Cat. 5e jacks only) CT® Series
Siemon
MAX® Series
Ortronics
Series II®
Ortronics
TracJack®
Note: * Catalog number indicated is gray, replace “GY” with the following to designate color: “BK” for Black, “WA” for White, “I” for Ivory.
AMP is a registered trademark of Tyco Electronics Corp. Krone® is a registered trademark of Krone, Inc. Leviton® is a registered trademark of Leviton. SYSTIMAX® is a registered
trademark of CommScope, Inc. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. NORDX® is a registered trademark of Belden/CDT, Inc. MAX® and CT®
Series are registered trademarks of The Siemon Company. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
Dimensions in Inches (mm)
www.hubbell-wiring.com
L-15
Recessed 4 and 8-Gang Concrete Floor Boxes
Floor Box Covers with Carpet Recess
Floor Boxes
Floor Boxes
Recessed 6-Gang Concrete Floor Boxes
Dimensions Inches (mm)
Complies with UL514A
Stamped Steel
Cast Iron
6-Gang
6-Gang
LCFBSSA
LCFBCA
Style
A
B
C
Min. Depth of Pour
3 .50" (88 .9)
3 .65" (92 .7)
Adjustability
Fully
Fully
Cubic Inch (cm3) Capacity
Per Chamber
(4) at 38 .2 cu . in . (626 .0 cm3)
(2) at 25 .4 cu . in . (416 .2 cm3)
(4) at 36 .8 cu . in . (603 .0 cm3)
(2) at 25 .4 cu . in . (416 .2 cm3)
Dimensions – A
6 .18" (157 .0)
6 .35" (161 .3)
Dimensions – B
12 .95" (328 .9)
13 .11" (333 .0)
Dimensions – C
12 .95" (328 .9)
13 .11" (333 .0)
Threaded Access Holes – Per Chamber
–
(1) ¾" & (1) 1¼"
(1) Concentric 1", 1¼"
(1) ¾"
Knockouts – Per Chamber
Concrete Cover Included

Closure Plugs Included
–
Cover Mounting Brackets Included*

–



Note: * Replacements Mounting Brackets available, (1 pair) LCFBBRACKET.
UL File Number E31999. CSA File Number LR18416.
Accessories
CFBOGPAN4
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level . This accessory is installed prior to the concrete
pour and provides a barrier between the soil . The on-grade
barrier comes with leveling feet and anchor points . Can be
used with other Hubbell floor boxes.
Pour Pan Dimensions:
15 .75 in . sq .
4 in . depth
Recessed 6-Gang Concrete Floor Boxes
Floor Box Covers Recessed Floor Box Covers
Smooth Metallic Cover,
Flange and Cable Doors
for Carpet Applications
Cover Dimensions
10 .30" x 10 .30"
Aluminum Finish
Brass Finish
Black
Gray
LCFBCALTC
LCFBCBRSTC
LCFBCBKTC
LCFBCGYTC
Metallic Cover,
Flange and Cable Doors
for Carpet Applications –
Carpet Insert Required
Cover Dimensions
10 .30" x 10 .30"
Aluminum Finish
Brass Finish
Black
Gray
LCFBCALC
LCFBCBRSC
LCFBCBKC
LCFBCGYC
Reinforced Non-Metallic Cover,
Flange and Cable Doors
for Carpet Applications –
Carpet Insert Required
Cover Dimensions
10 .30" x 10 .30"
Black
Brown
Gray
Ivory
LCFBCBKA
LCFBCBRA
LCFBCGYA
LCFBCIA
Smooth Metallic Cover and
Cable Doors for Tile Applications
Cover Dimensions
8 .31" x 7 .70"
Aluminum Finish
Brass Finish
Black
Gray
LCFBCALT
LCFBCBRST
LCFBCBKT
LCFBCGYT
Face Plates
LCFBP8
LCFBP26
LCFBP720
LCFBIM
LCFBP14
Duplex
Style Line®
Decorator Opening
Single Receptacle
(for 1 .56" boss dia .)
3-Unit Hubbell iSTATION™
(See Section P for
module options)
Blank
L-16
www.hubbell-wiring.com
Dimensions in Inches (mm)
Floor Boxes
Floor Boxes
Recessed 7- and 11-Gang Concrete Floor Boxes
Dimensions Inches (mm)
CFB7G Series
Style
CFB11G Series
7-Gang
11-Gang
A
B
C
CFB7G4
Min. Depth of Pour
CFB7G6
4 .08" (103 .5)
6 .08" (154 .3)
CFB11G4
CFB11G6
4 .08" (103 .5)
6 .08" (154 .3)
Adjustability
Before Pour
Before Pour
Before Pour
Before Pour
Dimensions: A
B
C
4 .08" (103 .5)
10 .0" (254 .0)
12 .2" (309 .9)
6 .08" (154 .3)
10 .0" (254 .0)
12 .2" (309 .9)
4 .08" (103 .5)
13 .5" (342 .9)
12 .2" (309 .9)
6 .08" (154 .3)
13 .5" (342 .9)
12 .2" (309 .9)
(4) x 1", 1¼" Concentric
(4) x 1", 1¼", 1½" Concentric (4) x 1", 1¼" Concentric
Trade Size Knockouts:
Sidewalls
(4) x 1", 1¼", 1½" Concentric
Back
(3) x 1", 1¼", 1½" Concentric; (3) x 1", 1¼", 1½" Concentric; (2) ¾", 1" Concentric;
(2) ¾", 1" Concentric;
(1) x 2"
(1) 2"
(4) 1", 1¼", 1½" Concentric, (4) 1", 1¼", 1½" Concentric,
(1) 2"
(1) 2"
Bottom
(4) x 1", 1¼", 1½" Concentric (4) x 1", 1¼", 1½" Concentric (5) 1", 1¼", 1½" Concentric; (5) 1", 1¼", 1½" Concentric;
(2) ¾", 1" Concentric
(2) ¾", 1" Concentric
Side View
Depth behind
mounting
plate
X - 1 .01"
Y - 2 .41"
Z - 3 .51"
X - 2 .37"
Y - 3 .77"
Z - 3 .65"
X - 1 .02"
Y - 2 .42"
Z - 3 .50"
X - 2 .37"
Y - 3 .81"
Z - 3 .72"
(1) 1-Gang
(1) 2-Gang
(1) 4-Gang
(2) 1-Gang
(1) 3-Gang
(1) 6-Gang
(2) 1-Gang
(1) 3-Gang
(1) 6-Gang
Z
X
Y
Accepts industry
(1) 1-Gang
standard size wallplates (1) 2-Gang
(sold separately)
(1) 4-Gang
Interior Configuration
3-Gang
2-Gang
4-Gang
6-Gang
Note: UL File Number E31999.
CSA File Number LR18416.
Accessories
CFBOGPAN4
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level . This accessory is installed prior to the concrete
pour and provides a barrier between the soil . The on-grade
barrier comes with leveling feet and anchor points . Can be
used with other Hubbell floor boxes.
Pour Pan Dimensions:
15 .75 in . sq .
4 in . depth
Floor Box Covers
CFB7G Series
Brass
Flange and cover;
Beveled edge for carpet
Flange and cover;
Square edge for tile
CFB11G Series
Aluminum
Brass
¼" Edging
CFB7CVRBRS
CFB7CVRALU
CFB11CVRBRS
½" Edging
CFB7TBRS
Aluminum
¼" Edging
CFB11CVRALU
¼" Edging
CFB7TALU
CFB11TBRS
CFB11TALU
Note: Covers provide a recess for floor covering insert.
Dimensions in Inches (mm)
www.hubbell-wiring.com
L-17
Recessed 7- and 11-Gang Concrete Floor Boxes
1-Gang
1-Gang
Floor Boxes
Floor Boxes
Flush Floor Boxes for Wooden Floors
Dimensions Inches (mm)
Rectangular Stamped Steel
1-Gang
L,
EL
BB
HU
C.
IN
A
Complies with UL514A
2-Gang
Round Cast Iron
3-Gang
1-Gang
1-Gang
C
A
B
C
B
Collar Material
Brass
B2481*
B2482
B2483
B2588*
B2588275*
Adjustability
Semi
Semi
Semi
Non
Non
Cubic Inch (cm3) Capacity
Per Gang
42 .0 cu . in .
(658 .3 cm3)
42 .5 cu . in .
(696 .5 cm3)
42 .5 cu . in .
(696 .5 cm3)
18 .5 cu . in .
(303 .2 cm3)
18 .5 cu . in .
(303 .2 cm3)
Dimensions – A
3 .13" (79 .5)
3 .13" (79 .5)
3 .13" (79 .5)
3 .65" (92 .7)
3 .65" (92 .7)
Dimensions – B
4 .50" (114 .3)
4 .50" (114 .3)
4 .50" (114 .3)
3 .22" (81 .8)
3 .22" (81 .8)
Dimensions – C
3 .20" (81 .3)
6 .42" (163 .1)
9 .64" (244 .9)
4 .09" (103 .9)
4 .09" (103 .9)
Sides (2) ¾"
Bottom (2) ½"
–
Threaded Access Holes
–
Knockouts – Sides
–
(1) ½", ¾", 1"
Knockouts – Ends
(2) ½", ¾", 1"
–
Knockouts – Bottom
–
(3) ½", ¾", 1"
–
(1) ½" - 1¼"
Bottom (2) ½"
–
–
(2) ½" - 1¼"
(3) ½" - 1¼"
–
–
–
–
Debris Cover Included



–
–
Closure Plugs Included
–
–
–


Removable LV Barrier
–


–
–
Note: UL File Number E31999.
CSA File Number LR18416.
* Suitable for single service applications only.
Rectangular Covers
Flush Floor Boxes for Wooden Floors
Brass
Aluminum
Dimensions
4 .15" x 2 .99"
S3825
SA3825
S3625
SA3625
Duplex
Flap
Duplex
Screw
S3826
SA3826
S2425
SA2425
Style Line®
2¹⁄₈" x ¾"
Decorator Opening Combination
S2625
SA2625
S2825
–
S3425
–
S3813
SA3813
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
Blank
Round Covers
Brass
Aluminum
3 .88" Dia .
Round Flanges
S3925
SA3925
S3725
SA3725
S2525
SA2525
S2725
SA2725
S2925
SA2925
Duplex
Flap
Duplex
Screw
2¹⁄₈" x ¾"
Comb .
2¹⁄₈" x 1"
Comb .
2¹⁄₈" Single
Receptacle
Rectangular Flanges (Required)
Brass
Aluminum
SB3083W
SA3083W
Number
of Gangs
1-Gang
Dimensions 6 .00" x 4 .85"
L-18
S3525
–
S3325
–
S3182
S3082
SA3182
SA3082
5 .25" Dia . 6 .25" Dia .
2³⁄₈" Single 2¹⁄₈" Single Rec .
Receptacle (Terrazzo Floor)
One Piece Brass Cover and Carpet Flange
SB3084W
SA3084W
SB3085W
SA3085W
2-Gang
6 .00" x 8 .13"
3-Gang
6 .00" x 11 .34"
Brass
SF3925
6 .25" Dia .
www.hubbell-wiring.com
Duplex
Flap
SF2525
SF2725
SF2925
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Si ngle
Receptacle
Dimensions in Inches (mm)
Flush Non-Metallic Floor Box For Concrete Floors
Residential Delivery Systems
The Hubbell Round Non-Metallic Floor Box offers an economical solution for electrical power or a combination of power
and voice/data applications. Designed specifically for slab-on-grade installation. Quick and easy installation is assured
using a push in place leveling system . UL Listed .
Floor Boxes
Floor Boxes
Removable neoprene gaskets
allow for independent use of
either side of the receptacle
with the cover closed
Pre-assembled
flange; cover
and leveling
ring for quick
installation
Recessed receptacle
minimizes plug protrusion;
allowing furniture to be
located over the plug
Cut box after
pour for height
adjustment
Apply PVC glue to the
leveling ring and simply push
into place; hold and wait
10 seconds; automatically
levels the cover to the floor
Parallel PVC hubs for
1 and ¾ inch conduit
The Right Choice For That Perfect Finishing Touch!
Solid Brass
Almond
Black
Chestnut Brown
Gray
Note: Not all configurations are available in all colors. See below for details.
Description
Material
Color
Catalog Number
Flange and hinged door cover assembly; includes tamperresistant duplex receptacle 15A 125V; gasket; floor leveling
PVC ring; high impact and chemically resistant nylon; factory
pre-assembled for easy drop-in installation .
Solid Brass
Thermoplastic
Thermoplastic
Thermoplastic
Thermoplastic
—
Almond
Black
Chestnut Brown
Gray
RF406BR
RF406AL
RF406BK
RF406BN
RF406GY
Flush fit (same as above).
Solid Brass
Floor box with concrete protective cover; accepts ¾ in . and
1 in . schedule 40 and schedule 80 PVC conduit; includes
round box (4 7/8 in . dia . x 6 .0 in . deep); four reducers;
closure plugs; and concrete cover with locator flag.
PVC
Hinged nylon replacement door cover; includes neoprene
gasket to seal plug openings; replacement cover for
RF406 series .
Solid(117)
Brass
Thermoplastic
PVC
P-7853-01
Thermoplastic
98 CU. IN.
(1600 cm ) MAX
Thermoplastic
VOL. 16 CU IN
(266 cm ) PER
Thermoplastic
IN OF DEPTH
RF400
—
Almond
Black
Chestnut Brown
Gray
RF407BR
RF407AL
RF407BK
RF407BN
RF407GY
3
MINIMUM CONCRETE
Ø 4.7"
Gray(119)
Low voltage divider; for use in PVC box RF400; when JLOAD™ Thermoplastic
DEPTH 4 IN (10.2 cm)
multimedia outlet is used .
RF408
6.8" (173)
4.6"
(117)
Ø 5.0" (127)
RF408
PVC
P-7853-01
98 CU. IN.
(1600 cm3) MAX
VOL. 16 CU IN
(266 cm3) PER
IN OF DEPTH
MINIMUM CONCRETE
DEPTH 4 IN (10.2 cm)
RF407BK
4.6" (117)
Product Dimensions Inches (mm)
4.6"
(117)
RF409BR
Gray
RF400
4.6"
3
4.6"
(117)
—
RF406BK
6.0"
(152)
Ø 4.7"
(119)
4.6" (117)
6.8" (173)
Dimensions in Inches (mm)
Ø 5.0" (127)
www.hubbell-wiring.com
L-19
Flush Non-Metallic Floor Box for Concrete Floors
Floor Box For Structural Concrete Floors
Floor Boxes
Floor Boxes
Flush Floor Boxes for Wooden Floors
Residential Delivery Systems
Drop-in Floor Box
Hubbell Wood Floor Boxes allow for the placement of electrical power or a combination
of power and voice/data devices. Boxes easily mount into the floor and are height
adjustable (up to ¾ inch) for optimal alignment and fit. UL Listed and CSA Certified.
Removable neoprene
gaskets allow for
independent use
of either side of
the receptacle
with the cover
closed
Drop-In Floor Boxes are perfect for quick and
easy installation of power or low voltage . Simply
cut a hole between the floor and joists and drop
through. The flange lip holds it in place.
Pre-assembled
flange and cover for
fast installation
Top screw fastening
and side joist
mounting provided
Back and side
knockouts for
proper wiring
access
Recessed receptacle
minimizes plug
protrusion; allowing
furniture to be
located over the plug
Low voltage divider
optional provides
for power and
voice/data in a
compact space
Low profile
Solid brass
flange and
cover
2½ inch hole
Height accessible
adjustments after the
box is mounted
Line and
low voltage
options
For use with
single or feed
through service
Strain relief
Ample wiring
room
Template cutout provided with instructions for proper installation .
The Right Choice For That Perfect Finishing Touch!
Solid Brass
Brass Plated
Chrome Plated
Copper Plated
Note: Not all configurations are available in all colors. See below for details.
Nickel Plated
Stainless Finish
Almond
Black
Chestnut Brown
Floor Boxes For Structural Wood Floors
Flush Floor Boxes for Wooden Floors
RF515BR
Description
Material
Finish
Cat. Number Material
Finish
Cat. Number
Decorator duplex receptacle floor
box kit; includes steel box, flange
and hinged door cover assembly
with 15A 125V tamper-resistant
duplex receptacle; designed for
installation in wood floors;
mounts to sub-floor or joists.
Solid Brass
Aluminum
Aluminum
Aluminum
Aluminum
Clear Lacquer
Stainless Paint
Almond Paint
Black Paint
Chestnut Brown Paint
RF515BR
RF515SS
RF515AL
RF515BK
RF515BN
Aluminum
Aluminum
Aluminum
Aluminum
Brass Plated
Chrome Plated
Copper Plated
Nickel Plated
RF515BP
RF515CH
RF515CU
RF515NI
Flush fit (same as above).
Solid Brass Clear Lacquer
RF509BR
Flange and hinged door cover
assembly; includes tamperresistant duplex receptacle;
neoprene gaskets; for use
with steel box RF500 .
Solid Brass
Aluminum
Aluminum
Aluminum
Aluminum
RF506BR
RF506SS
RF506AL
RF506BK
RF506BN
Aluminum
Aluminum
Aluminum
Aluminum
Brass Plated
Chrome Plated
Copper Plated
Nickel Plated
RF506BP
RF506CH
RF506CU
RF506NI
Clear Lacquer
Stainless Paint
Almond Paint
Black Paint
Chestnut Brown Paint
Adjustable floor box; 3 inch deep; three (3) ½ inch4.8"
knockouts: one on
Ø 5.6"
bottom; one on each side; non-metallic
sheathed(121)
cable clamps on each side .
(143)
RF506BR
—
Material
Rating
Catalog Number
Solid Brass
Solid Brass
15 Amp
20 Amp
RF151R
RF201R
Drop-In Floor Box For Structural Wood Floors
Description
3.2"
4.8"
(81)
(121)
Drop-in floor box; mounts in 2.50 inch
hole opening; includes solid
brass cover;
single 125V tamper-resistant receptacle; optional device mounts for two voice/
0.9"
data video ports; suitable for feed through
circuitry; impact resistant box .
(22)
Product Dimensions Inches (mm)
RF500
RF500
Steel
Wood Floor Boxes
Ø 5.6"
(143)
2.9"
(75)
0.9"(22)
Drop-In Floor Box
2.4" (61)
4.8"
(121)
0.3"
(8)
4.8"
(121)
3.2"
(81)
4.8"
(121)
0.9"
(22)
3.1"
(80)
Ø 2.5"
(63)
½"
Knockout
3 Places
Ø 2.5"
(63)
0.2"
(5)
Ø 3.4"
(86)
2.9"
(75)
0.2"
(5)
Ø 3.4"
(86)
7.8"
(197)
0.9"(22)
RF151R
2.4" (61)
7.8"
(197)
0.3"
(8)
L-20
4.8"
(121)
www.hubbell-wiring.com
Dimensions in Inches (mm)
Above-Floor Service Fittings (Single Service)
Hubbell offers a variety of above-floor service pedestals to satisfy just about
any requirement . Large capacity enables a choice of services—you can even
create your own unique pedestal to satisfy specific requirements. Above floor
service fittings are ideal for furniture feed applications.
3.00"
(76.2)
2.62"
(66.5)
Pedestals – Metallic – LO-CON (single service only)
Traditional metallic pedestals with die-cast aluminum frame, brushed
aluminum housing and stainless steel faceplates . These pedestals are offered
as component parts. They mount on floor box covers or floor deck/duct
systems with ¾-inch or 1-inch threaded openings .
Floor Boxes
Floor Boxes
4.38"
(111.3)
2.63"
(66.8)
Create Pedestal – Create your own pedestal to meet specific service
requirements. Order housing, face plates and devices separately.
Description
Catalog Number
Frame, housing, ¾ in . chase nipple, without plates .
Frame, housing, 1 in . chase nipple, without plates .
Blank plate .
Telephone bushing with 1 in . I .D . and (2) ³⁄₈ in . KO for coax .
Single receptacle plate with 1 .39 in . (35 .3) opening .
Duplex receptacle plate .
Style Line® decorator plate .
SC3098A
SC3099A
SS309B
SS309T
SS309S
SS309D
SS309DS
SC3098A
SC3099A
Furniture Feed Plates – Use with SC3098A or SC3099A housings to feed
furniture systems in office settings or display cases in retail applications.
Description
Catalog Number
Aluminum plate with ¾ in . trade size knockout .
Aluminum plate, blank .
SS309SF
SS309BF
SS309D
SS309DS
Note: When using SS309SF on Hubbell’s Lo-Con pedestals, SS309BF must be used on the opposite side.
Pedestals – Specialized Service – Large Capacity Pedestals
(single service only)
Designed to accommodate receptacles up to 50A (4-gang only) .
These brushed aluminum pedestals are furnished with either a ¾-inch or
1-inch hub and are designed for mounting to floor box covers with ¾-inch
or 1-inch threaded openings . Create your own unique pedestal with a wide
choice of stainless steel plates and devices .
Catalog Number
2-gang (front and back) with ¾ in . hub .
2-gang (front and back) with 1 in . hub .
SA6685
SA6686
2.88"
(73.1)
2.50"
(63.5)
5.63"
(143.0)
1"
(25.3)
Plate Option – 1-Gang
Description
Catalog Number
Duplex opening .
Style Line® decorator opening .
Single receptacle opening – boss diameter
1 .36 to 1 .39 in . (34 .5 to 35 .3) .
Single receptacle opening – boss diameter
1 .55 to 1 .58 in . (39 .4 to 40 .1) .
Blank plate .
SS8
SS26
SS7
SS720
Catalog Number
4-gang (2 front and 2 back), with ¾ in . hub .
4-gang (2 front and 2 back), with 1 in . hub .
SA6687
SA6688
Plate Option – 2-Gang
Description
Catalog Number
Two duplex openings .
Two Style Line® decorator openings .
Two single receptacle openings – boss diameter
1 .36 to 1 .39 in . (34 .5 to 35 .3) .
Single receptacle opening – boss diameter
2 .41 to 2 .44 in . (61 .2 to 62 .0) .
Single receptacle opening – boss diameter
2 .09 to 2 .13 in . (53 .1 to 54 .1) .
Blank plate .
SS82
SS262
SS72
SS720
SS26
4-Gang
SS13
Description (4-Gang Housing)
Dimensions in Inches (mm)
SS7
SA6685
SA6686
4.69"
(119.1)
2.50"
(63.5)
5.63"
(143.0)
1"
(25.3)
SA6687
SA6688
SS701
SS703
SS23
www.hubbell-wiring.com
SS82
SS262
L-21
Above-Floor Service Fittings (Single Service)
Description (2-Gang Housing)
2-Gang
Floor Boxes
Floor Boxes
Accessories
Replacement Adjustable Collar
C2400
C4200
Cover
Frame
Adjustable
Collar
Experiencing a problem? Let Hubbell accessories help solve it . Hubbell stacking
(adjustable) collars are the answer if the box is set too low . Need a replacement?
Choose from a full line of replacement covers and fittings. Hubbell accessories
also help you with the protection you need for plugs and receptacles .
Problem Solvers and Replacement Components
Stacking (Adjustable) Collars and Frames.
Designed to be used if floor box is set too low beneath the floor surface or the
adjustable collar and/or adapter on the box is damaged .
If the box number is . . .
Use Collar
Number
B2429, B2427, B2436 or B2437
B2503, B2506
B2529, B2536, B2527 or B2537
B4233
B4333
C2400*
C2504*
C2500*
C4200*
C4300*
Extension
Value
.81" (20 .5)
1 .06" (26 .9)
1 .06" (26 .9)
1 .03" (26 .2)
1 .03" (26 .2)
Note: * Only available as sets (collars and adapters). In cases where the adapter on the floor box is not damaged,
and only stacking is required, discard the adapter and use only the collar. The adjustable collars listed
above can be stacked as required to reach the floor surface. Longer screws will be required if more than
one collar is stacked (screws not provided). These screws are commercially available. Flat head #12-24
UNC machine screw x (approx. length). Minor Upward Adjustments: Round or Rectangular cover frames
(trim rings) may be stacked if the floor box is only slightly recessed below the floor surface.
Adapter
Box
Replacement Components for Floor Box
Covers and Fittings
Replacement Cover Frames
Box Type
Dimension
Round
Rectangular
4 .19" (106 .4) diameter
3 .19" (81 .0) x 4 .38" (111 .2)
Use Flange
Number
Extension
Value
S5016 or SA5016
S5017A or SA5017A
.31" (7 .9)
.31" (7 .9)
Crown Plugs
S5016
S5017A
Description
Used in the following covers
¾" thread size .
S2525, SA2525, S881, S2555,
S2530, S2425, SA2425, SF2525
S2725, SA2725, S2755, S2730,
S2625, SA2625, SF2725
1" thread size .
Crown Plugs
Catalog Number
Brass
Aluminum
S5012
SA5012
S5013
SA5013
Flush Cap Rings
S5012
S5013
Flush Cap Rings
Catalog Number
Brass
Aluminum
Description
Used in the following covers
2¹⁄₈" threaded plug
with ¾" thread size
opening .
2¹⁄₈" threaded plug
with 1" thread
size opening .
S2525, SA2525, S881, S2555,
S2530, S2425, SA2425, SF2525
S5010
SA5010
S2725, SA2725, S2755, S2730,
S2625, SA2625, SF2725
S5025
SA5025
Flush Plugs
S5010
Accessories
Flush Plugs
Description
Used in the following covers
¾" I .P .S . thread size .
1" I .P .S . thread size .
1½" fine thread size.
2¹⁄₈" fine thread size.
F1339, F1340
F1539
S3725, SA3725, S3625, SA3625
S2925, SA2925, S88, S2930,
S2955, SF2925, S2825
S3525, S3425
2³⁄₈" fine thread size.
Catalog Number
Brass
Aluminum
S5002
S5003
S5007
S5020
–
–
SA5007
SA5020
S5030
–
S5007
L-22
www.hubbell-wiring.com
Dimensions in Inches (mm)
Accessories
Problem Solvers and Replacement Components
Protective Ring for 2¹⁄₈ in. Threaded Covers
Protective Ring for 2¹⁄₈"
Threaded Covers
Description
Catalog Number
Provides mechanical and wet mop protection
for plugs and receptacles (brass) .
S3061
Theater Seating Floor Box
Floor Boxes
Floor Boxes
S3061
Description
Catalog Number
The theater seating floor box is nonadjustable and provides
a ¾ in . threaded hub for conduit connection to theater aisle
lights . It permits opening of the enclosure for wiring without
disturbing above floor connections. Other features include a
cast iron box with a corrosion-resistant finish and a blank
steel cover . Knockouts: (¾ in . surface, ¾ in . sides, ¾ in . bottom)
18 .80 cu . in . (380 cubic cm) .
F3185
Theater Seating Floor Box
F3185
Adjustable Tops (Brass)
Brass Outlet Fittings for Conduit Systems.
Future requirements for floor outlets may be accommodated by systematically
studding the floor with these fittings, all radiating from one or more floor boxes,
from which any changes or additions may be subsequently made by the pulling of
wires from box to the outlet . Adjustment tops are male connections to be mounted
on elbow or tee fittings. They provide a pre-pour adjustment and an available
connection for above-floor service heads.
Description
¾ in . threaded conduit size (male) .
1 in . threaded conduit size (male) .
A
B
1 .25" (31 .8)
1 .31" (33 .3)
1 .44" (36 .6)
1 .75" (44 .5)
Adjustable Tops (Brass)
Catalog Number
F1339
F1539
F1339
Note: Adjustment: ¾ in. and 1 in. fittings permit ½ in. vertical adjustment.
Coupling (Brass)
Couplings are utilized for straight conduit connections when a floor box is not
required . The conduit stub is brought to within approximately 1¼ in . of the planned
surface, and the coupling is mounted and adjusted prior to the concrete pour .
Standard service heads may be mounted to the couplings as required .
Description
¾ in . threaded conduit size (female) .
A
B
1 .44" (36 .6)
1 .25" (31 .8)
F1539
B
A
Adjustable Tops
Catalog Number
F1340
Coupling (Brass)
F1340
Accessories
Dimensions in Inches (mm)
www.hubbell-wiring.com
L-23
Floor Boxes
Floor Boxes
Hubbell Floor Box Cover to Receptacle
Compatibility Chart
Cover Style
Round
Terazzo (2¹⁄₈")
S3325
Hubbell Floor Box Cover to Receptacle Compatibility Chart
Rectangular
2³⁄₈"
S3525
S3425
Complies with UL514A
Duplex Flap
S(A)3925
Duplex Plug
S(A)3725
S(A)3825
S(A)3625
S(A)3826
5252AB
5262B
CR5252IG
HBL5252
HBL5262
IG5262
HBL4700
IG4700A
HBL4792
HBL4794
HBL4795
HBL5652
HBL5662
IG5662
HBL4550
IG4550A
HBL5302
5252AB
5262B
CR5252IG
HBL5252
HBL5262
IG5262
HBL4700
IG4700A
HBL4792
HBL4794
HBL4795
HBL5652
HBL5662
IG5662
HBL4550
IG4550A
HBL5302
HBL2152
IG2152
GF15LA
GFST15
HBL5260SA
HBL5262SA
Rating
2P, 3W
15A, 125V
NEMA Config.
5-15R
HBL5251
HBL5261
IG5261
HBL5251
HBL5261
IG5261
HBL5251
HBL5261
IG5261
2P,3W
15A, 125V
L5-15R
HBL4710
IG4710
HBL4710
IG4710
HBL4710
IG4710
2P, 3W
15A, 250V
6-15R
HBL5661
IG5661
HBL5661
IG5661
HBL5661
IG5661
2P, 3W
15A, 250V
2P, 3W
15A, 277V
2P, 3W
15A, 277V
2P, 3W
20A, 125V
L6-15R
HBL4560
IG4560
HBL4560
IG4560
HBL4560
IG4560
L7-15R
HBL4760
HBL4760
HBL4760
HBL4750
HBL4750
5-20R
HBL5361
IG5361
HBL5361
IG5361
HBL5361
IG5361
2P, 3W
20A, 125V
2P, 3W
20A, 125V
2P, 3W
20A, 250V
2P, 3W
20A, 250V
2P, 3W
30A, 125V
2P, 3W
30A, 250V
3P, 4W, 20A
125/250V
5-20R
5352AB
5362B
CR5352IG
HBL5352
HBL5362
IG5362
HBL5392
5352AB
5362B
CR5352IG
HBL5352
HBL5362
IG5362
HBL5392
HBL2310
IG2310
HBL5461
IG5461
HBL2320
IG2320
HBL2610
IG2610
HBL2620
IG2620
HBL8410
HBL2310
IG2310
HBL5461
IG5461
HBL2320
IG2320
HBL2610
IG2610
HBL2620
IG2620
HBL8410
HBL2310
IG2310
HBL5461
IG5461
HBL2320
IG2320
HBL2610
IG2610
HBL2620
IG2620
HBL8410
HBL5462
IG5462
HBL5462
IG5462
3P, 4W, 20A
3Ø 250V
15-20R
HBL2410
IG2410
HBL8420
HBL2410
IG2410
HBL8420
HBL2410
IG2410
HBL8420
3P, 4W, 30A
125/250V
3P, 4W, 30A
3Ø 250V
3P, 4W, 30A
3Ø 600V
4P, 5W, 20A
3ØY 120/208V
4P, 5W, 20A
3ØY 347/600V
4P, 5W, 30A
3ØY 120/208V
4P, 5W, 30A
3ØY 347/600V
L14-30R
HBL2420
IG2420
HBL2710
IG2710
HBL2720
IG2720
HBL2740
HBL2420
IG2420
HBL2710
IG2710
HBL2720
IG2720
HBL2740
HBL2420
IG2420
HBL2710
IG2710
HBL2720
IG2720
HBL2740
HBL2510
IG2510
HBL2530
HBL2510
IG2510
HBL2530
HBL2510
IG2510
HBL2530
HBL2810
IG2810
HBL2830
HBL2810
IG2810
HBL2830
HBL2810
IG2810
HBL2830
L-24
7-15R
L5-20R
6-20R
L6-20R
L5-30R
L6-30R
14-20R
L14-20R
L15-20R
L15-30R
L17-30R
L21-20R
L23-20R
L21-30R
L23-30R
Style Line®
2¹⁄₈"
S(A)2925
S(A)2725
S(A)2525
S2825
S(A)2625
S(A)2425
www.hubbell-wiring.com
HBL2162
IG2162
GF20LA
GFST20
HBL5360SA
HBL5362SA
Dimensions in Inches (mm)
Hubbell SystemOne Configuration Chart
Non-Metallic
Sub-Plates
S1SP
Style Line® Decorator/GFCI
S1SPDU
Duplex/Duplex
Line®
Complies with UL514A
Floor Boxes
4" Core Hole
Fire-Rated Poke-Throughs*
Metal
S1PFB
S1CFB
S1SFB
S1SFBAV
S1PTFIT
3
3.5
3.5
3.5



3
3.5
3.5
3.5



3
3.5
3.5
3.5



S1PT4X4FIT S1PTAVFIT
Duplex/Style
Decorator
S1SP4X4
S1SP4X4PA
S1SP4X4SYS
S1SPTL
Hubbell 4 X 4
Panduit Mini-Com® 4 X 4
SYSTIMAX® 4 X 4
4
4
4
4



Twist-Lock® Receptacle
+ Data
4
4
4
4



S1SP3IM
Hubbell DataCom
+ Power
5
5
5
5



S1SP4IM
Hubbell DataCom
3.5
3.5
3.5
3.5



+ Duplex
5
5
5
5



S1SPSL2IM
Hubbell DataCom
+ Style Line® Decorator
5
5
5
5



S1SPFFxx
(Carpet)
S1SPFFTxx
(Tile)
3
3.5
3.5
3.5



S1SPEXT1
Furniture Feed Cover/
Flange (Replace “x” with
BRS (brass finish),
AL (aluminum finish),
BL (black) or GY (gray).
Extron® MAAP + Power
4
4
4
4



S1SPEXT2
Extron®
AAP/MAAP
+ Power
4
4
4
4



S1SPEXT3
Extron Datacom
4.5
4.5
4.5
4.5



S1SPEXT4
Extron AAP + Flush
Keystone + Power
4
4
4
4



5
5
5
5



5
5
5
5



5
5
5
5



5
5
5
5



S1SPORT
S1SPTRAC
S1SPMAX
Ortronics Series
+ Power
Ortronics
+ Power
Siemon
II®
TracJack®
MAX®
+ Power
S1SPAMM20 Active Multimedia + Flush
Keystone + Power
S1CFCxx
SystemOne
Carpet Cover
S1TFCxx
SystemOne
Tile Cover
SystemOne Floor Boxes
and FRPTs use SystemOne
Universal Covers (Replace
“x” with BRS (brass finish),
AL (aluminum finish),
BL (black), GY (gray) or
I (ivory).
Dimensions in Inches (mm)
Signifies minimum depth of concrete
pour in inches for Hubbell SystemOne
Floor Boxes.

Recommended
Floor Fitting

Alternative Floor
Fitting

Not Compatible
Note: * Fire-Rated Poke-Throughs available with integral power junction box. Add “J” suffix to Catalog
Numbers listed above (Example: S1PTFITJ). See section M for available products.
Extron® is a registered trademark of Extron Electronics. MAX® is a registered trademark of The Siemon Company.
Mini-Com® and Panduit® are registered trademarks of Panduit Corp. SYSTIMAX® is a registered trademark of
CommScope, Inc. TracJack®, Series II® & Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
L-25
Hubbell SystemOne Configuration Chart
S1SPDUSL
S1SPDU2IM Hubbell DataCom
Floor Boxes
Floor Boxes
Convention Center Utility Box
Public assembly facilities such as convention centers,
exhibit halls and stadiums often require a diverse
range of utility services including power, data,
audio, video, voice, compressed air and water in
open floor space . Hubbell’s UL Listed and
CSA Certified Convention Center Utility Box
meets all of these requirements .
The internal components are custom
manufactured to the end user's
needs . The 32,000 lb . cover load
capacity meets the needs
of convention centers .
Painted Galvanized Steel
Enclosure (14 Gauge G90)
Cost effective, corrosion resistant
paint . Suitable for both on and
above-grade applications .
Stainless Steel Enclosure
(14 Gauge 304)
Corrosion resistant enclosure
suitable for both on and
above-grade applications .
Features
Benefits
UL Listed and CSA Certified
Third party approved and certified .
Heavy Duty Covers
32,000 lb . load capacity with 2x safety factor .
Scrub Water
Meets UL514 requirements for scrub water and prevents water, dirt and debris from
entering the electrical devices .
Custom Built Panels
Accepts a wide variety of electrical configurations including 100A pin and sleeve,
30A Twist-Lock®, straight blade devices and circuit breakers available .
Separate Enclosure for Compressed
Air and Water Utilities
Prevents air and water utilities from coming in contact with electrical services .
L-26
www.hubbell-wiring.com
Floor Boxes
Floor Boxes
Convention Center Utility Box
Metallic Series
Painted Galvanized Steel Box
Stainless Steel Box
Separate enclosure to keep water
away from electrical components
Hooks for tying
onto rebar
2-gang low voltage
compartment
HBLSCCUBPDW
4-inch pre-pour adjustability
HBLSCCUBPDWSS
Metallic Convention Center Utility Boxes*
Painted Galvanized Steel Box Description
Catalog Number
Steel Convention Center Utility Box with Cover for Power and Data/Communications
HBLSCCUBPD
Steel Convention Center Utility Box with Cover for Power, Data/Communications and Air/Water Box
HBLSCCUBPDW
Steel Convention Center Utility Box with Cover for Air/Water Only
HBLSCCUBW
Stainless Steel Box Description
Steel Convention Center Utility Box with Cover for Power and Data/Communications in Stainless Steel
HBLSCCUBPDSS
Steel Convention Center Utility Box with Cover for Power, Data/Communications and Air/Water Box in
Stainless Steel
HBLSCCUBPDWSS
Steel Convention Center Utility Box with Cover for Air/Water Only in Stainless Steel
HBLSCCUBWSS
Note: * All boxes provided with temporary galvanized steel concrete covers.
Power and Data Panels**
Note: ** Contact Hubbell for available configurations of power and data panels.
Stand Alone Power/Data Box
HBLSCCUBPD
Inside View
HBLSCCUBW
Inside View
HBLSCCUBPD
Inside View
HBLSCCUBPDSS
Up to 2-gangs
of data
20A and
30A devices
Circuit breakers
2 in . drain
Dimensions in Inches (mm)
www.hubbell-wiring.com
Up to 100A
Pin and Sleeve
L-27
Convention Center Utility Box
Custom manufactured and pre-wired to your project specifications . Panel options include 60A or 100A pin and sleeve, 20A and 30A
Twist-Lock®, 20A GFCI, isolated ground or industrial straight blade devices . Optional circuit breaker protection is available . Up to twogangs available for audio/video/data communication requirements . Both power and data panels are shipped separately after the boxes
have been set in concrete .
Floor Boxes
Floor Boxes
Convention Center Utility Box
Dimensional Information
Painted Galvanized or Stainless Steel Metallic Box
Stand Alone Power/Data
HBLSCCUBPD (Painted Galvanized)
HBLSCCUBPDSS (Stainless Steel)
2X
3.38"
(85.9)
2X
3.67"
(93.2)
23.51"
(597.2)
25.96"
(659.4)
13.46"
(341.9)
27.50"
(698.50)
6.00"
(152.4)
24.26"
(616.2)
8.90"
(226.1)
6.44"
(163.6)
24.27"
(616.5)
0-4"
(0-101.6)
Adjustment
13.47"
(342.1)
9.65"
(245.11)
Combination Power/Data/Water
HBLSCCUBPDW (Painted Galvanized)
HBLSCCUBPDWSS (Stainless Steel)
2X
13.47"
(342.1)
4X
3.38"
(85.9)
21.97"
(558.0)
Stand Alone Water/Air Box
HBLSCCUBW (Painted Galvanized)
HBLSCCUBWSS (Stainless Steel)
29.48"
(748.8)
13.46"
(341.9)
25.96"
(659.4)
4X
3.67"
(93.2)
9.65"
(245.1)
23.51"
(597.2)
27.50"
(698.5)
24.27"
(616.5)
0-4"
(0-101.6)
Adjustment
0-4"
(0-101.6)
Adjustment
25.60"
(650.2)
Convention Center Utility Box
Pre-Wired Power Panels
Convention Center Power Panels are custom built to order and pre-wired in the factory to make installation quick and easy .
Please contact the factory to configure a power panel for your specific needs.
L-28
Position
Device Options
8
Qty. (1) Pin & Sleeve Receptacle (60A or 100A).
9 & 10
Qty. (2) Twist-Lock® Receptacles (20A or 30A) .
11,12,13
Qty. (3) Duplex Receptacles (20A Standard,
GFCI or Isolated Ground) .
14
Load Center for Circuit Breakers, 8-Pole
Positions Max .
www.hubbell-wiring.com
Dimensions in Inches (mm)
CONNEXION Modular Wiring Zone System
Effective utilization of open space depends on the availability of power,
communications and the ability to reconfigure the space with minimal
down time . As infrastructure requirements change,
conventional wiring systems fail to provide
the flexibility required to support
constantly changing
personnel and
ever evolving
technologies .
The Hubbell
CONNEXION
Zone Distribution
System is a factory
assembled, flexible,
modular system
that delivers power
and data in raised
floor installations .
This unique system
increases the value of
the infrastructure and
meets the challenges
posed by new construction
and renovation in
commercial offices, retail
outlets and educational
facilities . By improving cable
management, enhancing
flexibility, and reducing
administration expense, the
CONNEXION Zone Distribution
System allows for power and
communications to be located
where needed for efficient
relocations and upgrades .
Zone Distribution Box
The Zone Distribution Box (ZDB)
is the conversion point between
hard wiring (conventional pipe
and wire) done by the on-site
electrical contractor and the
pre-manufactured zone distribution system . All components
are UL Listed to UL183 as
“Manufactured Wiring System” .
Dimensions in Inches (mm)
Extender Cables
The extender cable is the link
between the zone distribution
box and point of use furniture
feeds and raised access floor
boxes . Extender cables carry
all 8 conductors to every point
in the zone, offering the greatest
degree of circuit capacity—all
8 wires go everywhere .
www.hubbell-wiring.com
Complies with UL514A
Splitter
A “one-in”, “three-out” device
that allows power to be
distributed to more than one
location without running cables
back to the ZDB . This allows the
potential to power up more than
one furniture feed or floor box
from a single ZDB feed .
L-29
Floor Boxes
CONNEXION Modular Wiring Zone System
System Planning
Total cable length from ZDB
to point-of-use of service
not to exceed 80 ft.
Use Splitters to avoid
“Daisy Chaining” boxes.
Keep the layout simple
to eliminate confusion
and facilitate installation.
Workstation size.
Raised floor
height.
10'
(3048.0)
8'
(2438.4)
1'-6"
(487.7)
24'
(7315.2)
25'
(7620.0)
FURNITURE FEED
FIJB422
FIJB332
EXTENDER CABLE
EXT422xxFF8W
EXT332xxFF8W
Keep the zones small
(600 to 700 sq. ft.).
L-30
SPLITTER MODULE
SPLITTER422
SPLITTER332
Locate ZDB in
middle of zone.
RAISED ACCESS
FLOOR BOX
AFB101
AFB301
AFB401
AFB501
AFB801
ZONE DISTRIBUTION BOX
PDCS42222
PDCS42231
PDCS332
Maximize use of
equal length cables.
www.hubbell-wiring.com
Dimensions in Inches (mm)
CONNEXION – Wiring Schematics
L1
RED >
L2
BLUE >
L3
PINK >
L4
GREEN OR BARE >
G
L1
L2
L3
L4
G
G
GREEN / YELLOW >
IG
IG
CIRCUIT
"C"
CIRCUIT
"D"
IG
The CONNEXION System is offered in three common 20A per circuit wiring configurations
to support the unique
WHITE / BLACK >
N1
N1
N1
requirements of a building infrastructure . The basic system design to deliver all eight wires throughout the Network,
WHITE / RED >
N2
N2
N2
consisting of hots, neutrals, grounds, and isolated grounds .
CIRCUIT
"A"
CIRCUIT
"B"
Floor Boxes
Floor Boxes
BLACK >
4/2/2 System Configuration (4-Hots, 2-Neutrals, 2-Grounds)
3 + 1 Wiring Configuration
Appropriate in areas where moderate amounts
of sensitive equipment are used, and where
separation from other circuits and isolated
grounding are required .
n Three circuits share #10 AWG neutral to
manage harmonics for general purpose .
n One circuit on dedicated #10 AWG neutral
for sensitive equipment .
n Isolated ground capability for sensitive
equipment .
n Component Rating: 20 amperes at
120/208 or 120/240 volt .
n 8-Wires (4 hots, 2 neutrals, 2 grounds) .
BLACK >
L1
RED >
L2
BLUE >
L3
PINK >
L4
BLACK
GREEN OR
BARE>>
L1
G
RED >
GREEN / YELLOW >
BLUE >
WHITE / BLACK >
GREEN OR BARE >
WHITE / RED >
GREEN / YELLOW >
WHITE / BLACK >
L2
IG
L3
N1
G
N2
IG
N1
WHITE / RED >
N2
WHITE / BLUE >
N3
L1
L2
L3
L4
L1
G
G
G
L2
N1
N1
G
G
CIRCUIT
N1
"A"
CIRCUIT
"B"
N2
IG
L3
N1
N2
IG
CIRCUIT
"C"
CIRCUIT
"D"
N3
CIRCUIT
"A"
CIRCUIT
"B"
CIRCUIT
"C"
4/2/2 System Configuration (4-Hots, 2-Neutrals, 2-Grounds)
2 + 2 Wiring Configuration
Appropriate in areas where a high
concentration of sensitive equipment
(computers, printers) is needed and minimal
amounts of conventional equipment exist .
n Two circuits share one #10 AWG neutral to
manage harmonics for general purpose .
n Two additional circuits share one #10 AWG
neutral to manage harmonics for general
purpose .
n Isolated ground capability for sensitive
equipment .
n Component Rating: 20 amperes at
120/208 or 120/240 volt .
n 8-Wires (4 hots, 2 neutrals, 2 grounds) .
BLACK >
L1
RED >
L2
BLUE >
L3
PINK >
L4
GREEN OR BARE >
GREEN / YELLOW >
IG
WHITE / BLACK >
N1
WHITE / RED >
N2
L3
L4
G
G
N1
N1
L1
RED >
L2
BLUE >
L3
PINK >
BLACK >
GREEN OR BARE >
RED >
GREEN / YELLOW >
BLUE >
WHITE / BLACK >
GREEN OR BARE >
WHITE / RED >
GREEN / YELLOW >
L4
L1
G
L2
IG
L3
N1
G
N2
IG
WHITE / BLACK >
N1
WHITE / RED >
N2
WHITE / BLUE >
N3
CIRCUIT
"B"
IG
IG
N2
N2
CIRCUIT
"C"
CIRCUIT
"D"
L1
L2
L3
L1
G
N1
G
L4
G
L2
N1
G
G
L3
N1
IG
CIRCUIT
N1
"A"
CIRCUIT
"B"
N2
CIRCUIT
"C"
IG
N2
CIRCUIT
"D"
N3
CIRCUIT
"A"
CIRCUIT
"B"
CIRCUIT
"C"
Note: Contact factory for custom wiring configurations.
Dimensions in Inches (mm)
www.hubbell-wiring.com
BLACK >
L1
RED >
L2
BLUE >
L3
L-31
L1
L2
L3
CONNEXION - Wiring Schematics
n Three circuit capacity .
n Isolated ground capability for sensitive
equipment .
n Each circuit has its own #12 AWG neutral to
manage harmonics .
n Component Rating: 20 amperes at 120/208 or
120/240 volt .
n 8-Wires (3 hots, 3 neutrals, 2 grounds) .
L2
CIRCUIT
"A"
3/3/2 System Configuration (3-Hots, 3-Neutrals, 2-Grounds)
BLACK >
2 + 1 Wiring Configuration
Appropriate where either a 120/240 volt or
120/208 volt 3ØY power distribution system
exists and separate neutral conductors are
desired .
G
L1
Floor Boxes
Floor Boxes
System Components
Expandable Zone
Distribution Boxes
Catalog Number
Splitter Modules
Catalog Number
4/2/2 System (2+2)
4/2/2 System (3+1)
3/3/2 System
PDCS42222
PDCS42231
PDCS332
4/2/2 System
3/3/2 System
SPLITTER422
SPLITTER332
Extender Cable
Female To Female
Catalog Number
Furniture Feed
Catalog Number
4/2/2 System
3/3/2 System
EXT422xxFF8W*
EXT332xxFF8W*
4/2/2 System
3/2/2 System
FIJB422
FIJB332
Note: * Replace xx with “05” for 5 ft., “10” for
10 ft., “15” for 15 ft., “20” for 20 ft.,
“25” for 25 ft. and “30” for 30 ft.
Custom lengths are available
upon request.
Cable Whip
Male To Open
Catalog Number
Cable Whip
Female To Open
Catalog Number
4/2/2 System, 15 in .
3/3/2 System, 15 in .
4/2/2 System, 5 ft .
3/3/2 System, 5 ft .
4/2/2 System, 15 ft .
3/3/2 System, 15 ft .
EXT42201MO8W
EXT33201MO8W
EXT42205MO8W
EXT33205MO8W
EXT42215MO8W
EXT33215MO8W
4/2/2 System, 15 in .
3/3/2 System, 15 in .
4/2/2 System, 5 ft .
3/3/2 System, 5 ft .
4/2/2 System, 15 ft .
3/3/2 System, 15 ft .
EXT42201FO8W
EXT33201FO8W
EXT42205FO8W
EXT33205FO8W
EXT42215FO8W
EXT33215FO8W
Pre-Wired Raised Access Floor Box Configuration
Step 1 – Select a Raised Floor Box Series
Box Series
Description
Dimensions (Including Cover)
Conduit Knockouts
AFB101
AFB301
AFB401
AFB501
AFB801
4-Gang Deep with Non-Metallic Cover
4-Gang Deep with Metal Cover
4-Gang Shallow with Metal Cover
8-Gang Deep with Metal Cover
4-Gang Deep, Round with Metal Cover
8 .94"L x 6 .94"W x 5 .18"H
10 .00"L x 10 .00"W x 4 .30"H
10 .00"L x 10 .00"W x 2 .81"H
10 .00"L x 10 .00"W x 5 .31"H
8 .37" Diameter x 5 .68"H
½", ¾", 1"
½", ¾", 1", 1¼"
½", ¾", 1"
½", ¾", 1", 1¼"
½", ¾", 1"
Step 2 – Use Device Selection Chart to Configure Gangs
Step 2A
If customer needs the 4-gang deep box:
Step 2B
Choose 4/2/2 or 3/3/2 System {4 = 4/2/2, 3 = 3/3/2}
Step 2C
Gang 1 - Configure using selection chart
Step 2D
Gang 2 - Configure using selection chart
Step 2E
Gang 3 - Configure using selection chart
Step 2F
Gang 4 - Configure using selection chart
(Configured Catalog Number)
AFB301
AFB3014
AFB3014A
AFB3014AE
AFB3014AEH
AFB3014AEHZ
System Components
Device Selection Chart
Catalog Letter
L-32
Description
A
Line 1, 20A Duplex (5352G)
B
Line 1, 20A, IG Duplex (CR5352IG)
E
Line 2, 20A Duplex (5352G)
F
Line 2, 20A, IG Duplex (CR5352IG)
I
Line 3, 20A Duplex (5352G)
H
Line 3, 20A, IG Duplex (CR5352IG)
O
Line 4, 20A Duplex (5352G)
P
Line 4, 20A, IG Duplex (CR5352IG)
Z
Unpopulated gang, empty for install of tel/data .
www.hubbell-wiring.com
Dimensions in Inches (mm)
Unloaded Raised Access Floor Boxes and Face Plates
Dimensions Inches (mm)
Style
Metallic Cover
Non-Metallic Cover
Metallic Cover
4-Gang Deep
4-Gang Shallow
8-Gang Deep
4-Gang Deep
3-Gang Power and
1-Gang Low Voltage
AFB301BK
AFB301GNT
AFB401BK
AFB401GNT
AFB501BK
AFB501GNT
HBLAFB101BK*
HBLAFB101GNT*
AFB801BK†
AFB801GNT†
Floor Boxes
Floor Boxes
A
C
B
Cover Color
Black
Gray
Max. Floor Thickness
Cubic Inch (cm3)
Capacity Per Gang
Dimensions – A
Dimensions – B
Dimensions – C
Cover Flange Dim.
Knockouts – Sides
Knockouts – Bottom
Cover & Flange Included
(Carpet or tile application)
Floor Tile Cut-Out
2 .75" (69 .9)
1 .88" (47 .8)
2 .00" (50 .8)
(2) 22 .5 cu . in .
31 .3 cu . in .
25 .3 cu . in .
55 .6 cu . in .
(368 .7 cm3)
(513 cm3)
(414 cm3)
(911 cm3)
(2) 20 .5 cu . in .
(335 .9 cm3)
4 .00" (101 .6)
2 .62" (66 .5)
5 .12" (130 .0)
5 .18" (131 .6)
10 .00" (254 .0)
10 .00" (254 .0)
10 .00" (254 .0)
9 .00" (228 .6)
10 .00" (254 .0)
10 .00" (254 .0)
10 .00" (254 .0)
7 .00" (177 .8)
12 .00" x 12 .00"
12 .00" x 12 .00"
12 .00" x 12 .00"
10 .62" x 8 .62"
(1) ½", (2) ½" & ¾", (1) ½", (6) ½" & ¾" (1) ½", (2) ½" & ¾", (4) ½" & (4) ¾",
(4) 1¼" trade size
trade size
(4) 1¼" trade size
(4) ¾" & 1" trade size
(4) ¾" & 1"
(4) ¾" & 1"
(4) ¾" & 1"
(4) ¾" & 1"
trade size
trade size
trade size
trade size

3 .75" (95 .3)

10 .38" x 10 .38"

10 .38" x 10 .38"
2 .62" (66 .5)
(2) 17 .1 cu . in .
(280 cm3)
(1) 15 .9 cu . in .
(260 cm3)
6 .12" (155 .4)
–
–
10 .0" Diameter
(1) ½",
(2) ¾" & 1" trade size
(3) ½" & ¾"
trade size

10 .38" x 10 .38"

9 .00" x 7 .00"
8 .375" Diameter
Replacement Metallic Cover and Flange
Dimensions
Color
Catalog Number
Cover and Flange
Cover and Flange
12"W x 12"L
12"W x 12"L
Gray
Black
HBLTCGNT
HBLTCGNTBK
Replacement Non-Metallic Cover and Flange
Description
Dimensions
Color
Catalog Number
Cover and Flange
Cover and Flange
7"W x 9"L
7"W x 9"L
Gray
Black
HBLAFB101TCGNT*
HBLAFB101TCBK*
Note: UL File Number E31999. CSA File Number LR702145.
For City of Chicago approved versions, use following part numbers: HBLAFB301BASEC, HBLAFB401BASEC and
HBLAFB501BASEC. Cover must be ordered separately (i.e., HBLTCGNT and HBLTCGNTBK). These versions do not
include knockouts and meet construction requirements for CCEA-2000. AFB covers are reversible for both carpet recess
and flush tile applications.
* Insert for flush tile applications included. Remove insert for carpet recess.
† One faceplate required for data gang only. Cut-out for duplex receptacles included with AFB801.
HBLTCGNT
HBLAFB101TCGNT*
Hubbell – Screw Type Face Plates**
HBLST302SGY
HBLDE301SGY
HBLTO310SGY
HBLTL318SGY
HBLTL319SGY
HBLBL300SGY
HBLIMFSGY
HBL317SGY
Duplex
Style Line®
Decorator
Toggle
Single Receptacle
(1.56" Boss Dia.)
Single Receptacle
(1.39" Boss Dia.)
Blank
3-Unit Hubbell iSTATION™
(See Section P for
module options)
Hubbell
6-Port
Open Systems – Screw Type Face Plates**
HBLAM303SGY HBLAMP313SGY HBLKR314SGY HBLLT309SGY HBLPA308SGY HBLNO309SGY HBLSI305SGY HBLSI315SGY HBLOR306SGY HBLORT322SGY
AMP-ACO
AMP 6-Port
Krone®/Leviton® SYSTIMAX®
Panduit
NORDX® 6-Port
Siemon
Mini-Com® (Cat. 5e jacks only) CT® Series
Siemon
MAX® Series
Ortronics
Series II®
Ortronics
TracJack®
Note: ** Catalog number indicated is gray, replace “GY” with the following to designate color: “BK” for Black, “I” for Ivory and “WA” for White.
AMP is a registered trademark of Tyco Electronics Corp. Krone® is a registered trademark of Krone, Inc. Leviton® is a registered trademark of Leviton., SYSTIMAX® is a
registered trademark of CommScope, Inc. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. NORDX® is a registered trademark of Belden/CDT, Inc.
MAX® and CT® Series are registered trademarks of The Siemon Company. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
Dimensions in Inches (mm)
www.hubbell-wiring.com
L-33
Unloaded Raised Access Floor Boxes and Face Plates
Description
Floor Boxes
Floor Boxes
Custom Pre-Wired Access Floor Boxes
Wire leads for
field termination
Hinged cable egress port
Pre-wired cable whip
Pre-wired devices
Access floor box
Oversized opening provided
with grommet for low-voltage
Features and Benefits
• Reduce job site fabrication time and installation labor .
• Reduce job site waste .
Custom Pre-Wired Access Floor Boxes
• Access Floor Box (AFBPW) pre-wired to your specifications .
– Choose from Hubbell quality devices .
– Single or multiple circuit wiring configurations .
– Various cable lengths .
• AFB installs easily; no disassembly of the box and cover required .
• Pigtail terminates beneath raised floor .
• Box covers available in black or granite powder coat finish .
• Contact Hubbell Wiring Systems for ordering information .
• UL Listed Wiring Assembly, file number E305156 .
Pre-Wired Raised Access Floor Box Options
Box Series
Description
Dimensions (Including Cover)
Conduit Knockouts
AFBPW101
4-Gang Deep with Non-Metallic Cover
8 .94"L x 6 .94"W x 5 .18"H
½", ¾", 1"
AFBPW301
4-Gang Deep with Metal Cover
10 .00"L x 10 .00"W x 4 .30"H
½", ¾", 1", 1¼"
AFBPW401
4-Gang Shallow with Metal Cover
10 .00"L x 10 .00"W x 2 .81"H
½", ¾", 1"
AFBPW501
8-Gang Deep with Metal Cover
10 .00"L x 10 .00"W x 5 .31"H
½", ¾", 1", 1¼"
AFBPW801
4-Gang Deep with Round Metal Cover
8 .37" Diameter x 5 .68"H
½", ¾", 1"
L-34
www.hubbell-wiring.com
Dimensions in Inches (mm)
Furniture and Work Surface Connectivity Boxes
This family of furniture and work surface connectivity
boxes installs into conference tables and
workstations to bring power, voice, data, and
multimedia directly to the point of use . In
addition, they offer an aesthetic design
with improved cable management .
Now, users can plug in laptops,
projectors and other equipment
at the desktop level - no more
crawling under the table
or moving obstacles to
get to the electrical
outlet and network
connectivity .
Flush Mount Boxes
Hubbell offers square and
rectangular flush mount boxes
in a variety of configurations .
These boxes are available
in stainless steel, anodized
aluminum or painted finishes
to match any décor . Boxes are
designed for easy installation
and are available pre-wired or
empty for field wiring .
Lift-up Style Boxes
Offering a convenient and
attractive method for work
surface power and data
connections, these boxes are
available in several finishes.
When not in use, services
are concealed by flipping
the unit down .
www.hubbell-wiring.com
Table Mount Boxes
The table mount series can be
mounted on any work surface
to provide power and data
activation . Choose from a
variety of mounting brackets
that allow temporary or
permanent mounting . Units are
pre-wired for easy installation .
L-35
Table Top Boxes
Pre-Wired Boxes
Round dual-service boxes
easily install into a 3½-inch
diameter core hole . Power
is pre-wired and keystone
openings accommodate data
or multi-media activation .
L-36
Pre-Wired Boxes
Configured with 15A power
outlet, 15-pin feed through and
3 .5mm audio jack . This unit
allows for further customization
by populating two keystone
openings .
www.hubbell-wiring.com
Low Voltage Boxes
Low voltage only units are
available pre-loaded with
XLR microphone jack or with
keystone opening for Hubbell
snap-fit modules .
Furniture Connectivity Boxes
Square Flush Mount Boxes
Description
Finish
Dimensions
2-Gang Square Flush Mount Box with Cover .
Black
6 .5"L x 6 .5"W x 3 .75"H
Catalog Number
HBLSHA2
2-Gang Square Flush Mount Box with Cover .
Stainless Steel
6 .5"L x 6 .5"W x 3 .75"H
HBLSHA2BSS
Dimensions
Catalog Number
Rectangular Flush Mount Boxes
Description
Finish
2-Gang Rectangular Flush Mount with Cover .
Black
10 .75"L x 4 .06"W x 3 .5"H HBLPHA2
2-Gang Rectangular Flush Mount with Cover .
Stainless Steel
10 .75"L x 4 .06"W x 3 .5"H HBLPHA2BSS
4-Gang Rectangular Flush Mount with Cover .
Black
10 .75"L x 6 .5"W x 3 .5"H
HBLPHA4
4-Gang Rectangular Flush Mount with Cover .
Stainless Steel
10 .75"L x 6 .5"W x 3 .5"H
HBLPHA4BSS
Dimensions
Catalog Number
Surface Mount Boxes
Description
Finish
2-Gang Surface Mount Box .
Black
4 .19"L x 4 .81"W x 2 .44"H HBLCON2
3-Gang Surface Mount Box .
Black
6 .19"L x 4 .81"W x 2 .44"H HBLCON3
HBLSHA2
HBLPHA2
Recessed Mount Boxes
Description
Finish
4-Gang Recessed Mount .
Black
10 .25"L x 7 .0"W x 5 .88"H HBLMIR2
Dimensions
Catalog Number
8-Gang Recessed Mount .
Black
31 .0"L x 10 .25"W x 5 .88"H HBLMIR4
HBLCON2
Under Desk Mount Boxes
Description
Finish
Dimensions
2-Gang Under Desk Mount .
Black
9 .19"L x 3 .0"W x 2 .88"H
3-Gang Under Desk Mount .
Black
Catalog Number
HBLMAR2
13 .69"L x 3 .0"W x 2 .88"H HBLMAR3
Hubbell – Screw Type Face Plates
HBLST302SBK
Duplex
Furniture and Work Surface Connectivity Boxes
Furniture and Work Surface Connectivity Boxes
HBLMIR2
HBLDE301SBK
HBLBL300SBK
Style Line®
Decorator Opening
Blank
HBLIMFSBK
HBL317SBK
3-Unit Hubbell iSTATION™
(See Section P for
module options)
Hubbell
6-Port
HBLMAR2
Note: See page L-33 for open systems screw type face plates.
Table Top Boxes
Low Voltage Only
Finish
Table Top box; 2 inch diameter hole;
(1) keystone opening; Keystone modules
sold separately .
Black Anod . Alum .
Clear Anod . Alum .
Solid Brass
2 .19" Diameter
Dimensions
TTBKSBK
TTBKSAL
TTBKSBR
Catalog Number
Table Top box; 2 inch diameter hole;
(1) XLR microphone jack installed .
Black Anod . Alum .
Clear Anod . Alum .
Solid Brass
2 .19" Diameter
TTBXLRBK
TTBXLRAL
TTBXLRBR
TTBKSBK
TTBXLRBK
Pre-Wired Dual-Service
Description
Finish
Dimensions
Catalog Number
Table Top box; 3 .5 inch diameter hole; (1)
Black Anod . Alum .
pre-wired 15A outlet with 9 foot power supply Clear Anod . Alum .
cord; (1) 3 .5mm screw terminal audio jack;
Solid Brass
(1) 15-pin gender changer F/F; (2) keystone
openings; Keystone modules sold separately .
3 .88" Diameter
TTBDS1BK
TTBDS1AL
TTBDS1BR
Table Top box; 3 .5 inch diameter hole;
(2) pre-wired 15A outlets with 9 foot power
supply cord; (2) keystone openings;
Keystone modules sold separately .
3 .88" Diameter
TTBDS2BK
TTBDS2AL
TTBDS2BR
Black Anod . Alum .
Clear Anod . Alum .
Solid Brass
TTBDS1BK
Note: See Section A for power devices and Section P for datacom accessories.
Dimensions in Inches (mm)
www.hubbell-wiring.com
TTBDS2BK
L-37
Furniture Connectivity Boxes
Description
Furniture and Work Surface Connectivity Boxes
Furniture and Work Surface Connectivity Boxes
Pre-Wired Work Surface Series
Square Lift-Up Style
Finish
Two (2) pre-wired 15A outlets with 6-ft .
power supply cord; 1-Unit opening for
Hubbell iSTATION modules . Unit rotates
up when in use and down to conceal
services when not in use .
Black
Silver
Dimensions
Catalog Number
5 .75"L x 5 .39"W x 4 .25"H WSBC21UBK
WSBC21USV
WSBC21UBK
Square Mini Lift-Up Style
Description
Finish
One (1) pre-wired 15A outlet with 9-ft .
power supply cord; One (1) RJ-45 jack
installed with 6-ft . patch cord .
Black
Brushed Stainless
Steel
3 .7"L x 3 .7"W x 2 .93"H
Dimensions
WSBA11BK
WSBA11BSS
Catalog Number
Two (2) pre-wired 15A outlets with 9-ft .
power supply cord (power only) .
Black
Brushed Stainless
Steel
3 .7"L x 3 .7"W x 2 .93"H
WSBA2BK
WSBA2BSS
WSBA11BK
Under Table Mount
WSBD21UBK
WSBE22SV
Pre-Wired Work Surface Series
Description
Description
Finish
Two (2) pre-wired 15A outlets with 9-ft .
power supply cord; One (1) Low Voltage
Plate included with 1-Unit opening for
Hubbell iSTATION modules .
Black
Dimensions
Catalog Number
6 .50"L x 1 .75"W x 2 .25"H WSBD21UBK
Work Surface Mount
Description
Finish
Dimensions
Catalog Number
One (1) pre-wired 15A outlet with 9-ft .
power supply cord; One (1) Hubbell
Keystone opening .
Black
Silver
3 .57"L x 2 .19"W x 2 .50"H WSBE11BK
WSBE11SV
Two (2) pre-wired 15A outlets with 9-ft .
power supply cord; Two (2) Hubbell
Keystone openings .
Black
Silver
6 .32"L x 2 .19"W x 2 .50"H WSBE22BK
WSBE22SV
Three (3) pre-wired 15A outlets with 9-ft .
power supply cord; One (1) Low Voltage
Plate included with 1-Unit opening for
Hubbell iSTATION modules .
Black
Silver
8 .25"L x 2 .19"W x 2 .50"H WSBE31UBK
WSBE31USV
Mounting bracket with thumb screw
(optional) .
n/a
n/a
WSBECLAMP
Dimensions
Catalog Number
Recessed Concealed Services
WSBB23UBK
L-38
Description
Finish
Two (2) pre-wired 15A outlets with 6-ft .
power supply cord; One (1) Low Voltage
Plate included with 1-Unit opening for
Hubbell iSTATION modules; Two (2)
additional 1-Unit openings provided
in base of unit .
Black
Brushed Anod . Alum .
Brushed Stainless
Steel
8 .98"L x 5 .47"W x 2 .97"H WSBB23UBK
WSBB23UBAL
WSBB23UBSS
Four (4) pre-wired 15A outlets with 6-ft .
power supply cord; Two (2) 1-Unit
opening for Hubbell iSTATION modules
provided in base of unit .
Black
Brushed Anod . Alum .
Brushed Stainless
Steel
8 .98"L x 5 .47"W x 2 .97"H WSBB43UBK
WSBB43UBAL
WSBB43UBSS
Empty Enclosure with one (1) duplex
opening, One (1) Low Voltage Plate
included with 1-Unit opening for Hubbell
iSTATION modules; Two (2) additional
1-Unit openings provided in base of unit;
intended for field wiring.
Black
8 .98"L x 5 .47"W x 2 .97"H WSBBHWBK
www.hubbell-wiring.com
Dimensions in Inches (mm)
Pre-Wired Work Surface Series
Grommet Style
Description
Finish
Dimensions
Catalog Number
Two (2) pre-wired 15A outlets with
6-ft . power supply cord; Two (2)
Hubbell Keystone openings .
Black
Silver
Flush Grommet Cover with
dust shield .
Black
5 .68"L x 3 .39"W x 0 .96"H
Silver
Brushed Aluminum
Brushed Stainless
Steel
8 .62"L x 3 .0"W x 2 .25"H WSBF22BK
WSBF22SV
WSBF22BK
WSBFGROMBK
WSBFGROMSV
WSBFGROMBAL
WSBFGROMBSS
WSBFGROMSV
WSBFGROMBK
WSBFGROMSV
WSBFGROMBAL
WSBFGROMBSS
Furniture and Work Surface Connectivity Boxes
Furniture and Work Surface Connectivity Boxes
Pre-Wired Work Surface Elite Series
Recessed Concealed Services
Description
Finish
Four (4) pre-wired 15A outlets with
6-ft . power supply cord; Three (3)
Low Voltage Plates included with
1-Unit opening for Hubbell
iSTATION modules .
Black
Silver
Clear Anodized
Black Anodized
Dimensions
Catalog Number
15 .0"L x 9 .0"W x 6 .25"H
WSBG43UBK
WSBG43USV
WSBG43UBAL
WSBG43UBBA
WSBG43USV
(cover doors shown open)
Description
Finish
Base Unit with Four (4) pre-wired 15A —
outlets with 6-ft . power supply cord;
Two (2) Low Voltage plates included
with 1-Unit opening for Hubbell
iSTATION modules .
Dimensions
Catalog Number
8 .90"L x 8 .90"W x 13 .9"H WSBH42U*
Trim Ring and Decorative Round Top . Black
5 .25" Diameter
WSBHTRBK
Trim Ring and Decorative Round Top . Brushed Stainless
Steel
5 .25" Diameter
WSBHTRBSS
WSBH42U with
WSBHTRBK
Note: * WSBH42U is CSA Certified only.
Replacement Low Voltage
Data Plates
Description
WSBPLATE1
Finish
Dimensions
Catalog Number
Non-metallic low voltage plate, blank . Black
3 .18"L x 1 .88"W
WSBPLATE1
Non-metallic low voltage plate,
1-Unit Hubbell iSTATION cut-out .
3 .18"L x 1 .88"W
WSBPLATE2
Dimensions in Inches (mm)
Black
www.hubbell-wiring.com
WSBPLATE2
L-39
Pre-Wired Work Surface Elite Series
Pop-Up Style*
Recessed Wall Boxes
Recessed Wall Boxes
Multi-Connect – Recessed Wall Boxes and Flanges
Multi-Service Recessed Wall Boxes for Drywall Applications
1-Gang
2-Gang
Description
Catalog Number
Multi-service recessed wall box, 1-gang, for drywall applications .
HBLWSCS1
Multi-service recessed wall box, 2-gang, for drywall applications .
HBLWSCS2A
Multi-service recessed wall box, 3-gang, for drywall applications .
HBLWSCS3A
Multi-service recessed wall box, 4-gang, for drywall applications .
HBLWSCS4A
Multi-service recessed wall box, 6-gang, for drywall applications .
HBLWSCS6A
Barrier for use with above boxes when used in multi-service applications .
HBLSCSBW
Low Voltage Recessed Wall Boxes for Drywall Applications
3-Gang
4-Gang
Description
Catalog Number
Low voltage recessed wall box, 2-gang, for drywall applications .
HBLWSCS2MMO
Low voltage recessed wall box, 3-gang, for drywall applications .
HBLWSCS3MMO
Low voltage recessed wall box, 4-gang, for drywall applications .
HBLWSCS4MMO
Low voltage recessed wall box, 6-gang, for drywall applications .
HBLWSCS6MMO
Multi-Service Recessed Wall Boxes for Masonry Applications
6-Gang
1-Gang
2-Gang
Description
Catalog Number
Multi-service recessed wall box, 1-gang, for masonry applications .
HBLWSCS1MBD
Multi-service recessed wall box, 2-gang, for masonry applications .
HBLWSCS2MBD
Multi-service recessed wall box, 3-gang, for masonry applications .
HBLWSCS3MBD
Multi-service recessed wall box, 4-gang, for masonry applications .
HBLWSCS4MBD
Multi-service recessed wall box, 6-gang, for masonry applications .
HBLWSCS6MBD
Barrier for use with above boxes when used in multi-service applications .
HBLSCSBMBD
Multi-Connect – Recessed Wall Boxes and Flanges
Wall Box Flanges – Trim Rings
Color For 1-Gang Box
3-Gang
Black
Gray
Ivory
White
4-Gang
HBLTRIM1WBK
HBLTRIM1WGY
HBLTRIM1WI
HBLTRIM1WWA
For 2-Gang Box
For 3-Gang Box
For 4-Gang Box
For 6-Gang Box
HBLTRIM2WBK
HBLTRIM2WGY
HBLTRIM2WI
HBLTRIM2WWA
HBLTRIM3WBK
HBLTRIM3WGY
HBLTRIM3WI
HBLTRIM3WWA
HBLTRIM4WBK
HBLTRIM4WGY
HBLTRIM4WI
HBLTRIM4WWA
HBLTRIM6WBK
HBLTRIM6WGY
HBLTRIM6WI
HBLTRIM6WWA
Note: See page L-42 for dimensional data.
6-Gang
Hubbell – Screw Type Face Plates*
HBLST302SGY
HBLDE301SGY
HBLTO310SGY
HBLTL318SGY
HBLTL319SGY
HBLBL300SGY
HBLIMFSGY
HBL317SGY
Duplex
Style Line®
Decorator
Toggle
Single Receptacle
(1.56" Boss Dia.)
Single Receptacle
(1.39" Boss Dia.)
Blank
3-Unit Hubbell iSTATION™
(See Section P for
module options)
Hubbell
6-Port
Open Systems – Screw Type Face Plates*
HBLAM303SGY HBLAMP313SGY HBLKR314SGY HBLLT309SGY HBLPA308SGY HBLNO309SGY HBLSI305SGY HBLSI315SGY HBLOR306SGY HBLORT322SGY
AMP-ACO
AMP 6-Port
Krone®/Leviton® SYSTIMAX®
Panduit
NORDX® 6-Port
Siemon
Mini-Com® (Cat. 5e jacks only) CT® Series
Siemon
MAX® Series
Ortronics
Series II®
Ortronics
TracJack®
Notes: *Catalog number indicated is gray, replace “GY” with the following to designate color: “BK” for Black, “I” for Ivory and “WA” for White.
For Snap-In style plates, remove "S" before color suffix.
AMP is a registered trademark of Tyco Electronics Corp. Krone® is a registered trademark of Krone, Inc. Leviton® is a registered trademark of Leviton., SYSTIMAX® is a
registered trademark of CommScope, Inc. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. NORDX® is a registered trademark of Belden/CDT, Inc.
MAX® and CT® Series are registered trademarks of The Siemon Company. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
L-40
www.hubbell-wiring.com
Dimensions in Inches (mm)
Recessed Wall Boxes
Recessed Wall Boxes
Multi-Connect – Dimensional Information
Multi-Connect – Dimensional Information
Catalog Number
Height
Width
Depth
HBLWSCS1
4 .44" (112 .8)
2 .56" (65 .0)
2 .75" (69 .8)
Gangs
HBLWSCS2A
4 .44" (112 .8)
4 .56" (115 .8)
2 .75" (69 .8)
2
HBLWSCS3A
4 .44" (112 .8)
6 .56" (166 .6)
2 .75" (69 .8)
3
HBLWSCS4A
4 .44" (112 .8)
8 .56" (217 .4)
2 .75" (69 .8)
4
HBLWSCS6A
4 .44" (112 .8)
12 .56" (319 .0)
2 .75" (69 .8)
6
HBLWSCS2MMO
4 .88" (123 .8)
4 .75" (120 .7)
3 .50" (88 .9)
2
HBLWSCS3MMO
4 .88" (123 .8)
6 .75" (171 .4)
3 .50" (88 .9)
3
HBLWSCS4MMO
4 .88" (123 .8)
9 .25" (235 .0)
3 .50" (88 .9)
4
HBLWSCS6MMO
4 .88" (123 .8)
13 .25" (336 .6)
3 .50" (88 .9)
6
HBLWSCS1MBD
4 .88" (123 .8)
2 .75" (69 .9)
3 .50" (88 .9)
1
HBLWSCS2MBD
4 .88" (123 .8)
4 .79" (120 .7)
3 .50" (88 .9)
2
HBLWSCS3MBD
4 .88" (123 .8)
6 .75" (171 .4)
3 .50" (88 .9)
3
HBLWSCS4MBD
4 .88" (123 .8)
9 .25" (235 .0)
3 .50" (88 .9)
4
HBLWSCS6MBD
4 .88" (123 .8)
13 .25" (336 .6)
3 .50" (88 .9)
6
HBLTRIM1W
6 .75" (171 .4)
4 .25" (107 .9)
.25" (6 .3)
1
HBLTRIM2W
6 .75" (171 .4)
6 .25" (158 .7)
.25" (6 .3)
2
HBLTRIM3W
6 .75" (171 .4)
8 .25" (209 .5)
.25" (6 .3)
3
HBLTRIM4W
6 .75" (171 .4)
10 .25" (260 .3)
.25" (6 .3)
4
HBLTRIM6W
6 .75" (171 .4)
13 .25" (336 .5)
.25" (6 .3)
6
1
Cable Access Knockouts and Openings
Quantity
Size
Location
Type
HBLWSCS1
1
½", ¾"
Top & Bottom
Knockouts
HBLWSCS2A
1
1
½", ¾"
1", 1¼"
Top & Bottom
Top & Bottom
Knockouts
Knockouts
HBLWSCS3A
2
1
½", ¾"
1", 1¼"
Top & Bottom
Top & Bottom
Knockouts
Knockouts
HBLWSCS4A
1
1
2
½", ¾"
¾", 1"
1", 1¼"
Top & Bottom
Top & Bottom
Top & Bottom
Knockouts
Knockouts
Knockouts
HBLWSCS6A
3
1
2
½", ¾"
¾", 1"
1", 1¼"
Top & Bottom
Top & Bottom
Top & Bottom
Knockouts
Knockouts
Knockouts
HBLWSCS2MMO
1
2"
Top & Bottom
Opening
HBLWSCS3MMO
1
1
4
1
1¼"
1¼"
½", ¾"
2"
Side
Top
Top
Bottom
Knockouts
Opening
Knockouts
Opening
HBLWSCS4MMO
1
2
4
1
1
1
1¼"
1¼"
½", ¾"
2"
½", ¾"
¾", 1"
Side
Top
Top
Bottom
Bottom
Bottom
Knockouts
Openings
Knockouts
Opening
Knockouts
Knockouts
HBLWSCS6MMO
1
3
6
2
1
1
1¼"
1¼"
½", ¾"
2"
½", ¾"
¾", 1"
Side
Top
Top
Bottom
Bottom
Bottom
Knockouts
Openings
Knockouts
Openings
Knockouts
Knockouts
HBLWSCS1MBD
2
½", ¾"
Top & Bottom
Knockouts
HBLWSCS2MBD
4
½", ¾"
Top & Bottom
Knockouts
HBLWSCS3MBD
6
½", ¾"
Top & Bottom
Knockouts
HBLWSCS4MBD
8
½", ¾"
Top & Bottom
Knockouts
HBLWSCS6MBD
12
½", ¾"
Top & Bottom
Knockouts
Dimensions in Inches (mm)
www.hubbell-wiring.com
L-41
Multi-Connect – Dimensional Information
Catalog Number
Recessed Wall Boxes
Recessed Wall Boxes
AV In-Wall and Ceiling Enclosures
AV In-Wall Enclosure
Hubbell’s netSELECT® Flat Panel Television (FPTV)
connection enclosure delivers high-density connectivity
and power in the wall . This allows flat panel displays
and interactive “smart” boards to sit flush against walls
with no dangling cords . It quickly installs to studs or
sheetrock without additional components or hardware .
Mounting
Locations for
Power or Data
Services
Mounts to Studs
or Sheetrock
• Optional cover reduces tampering
• cULus 1863 Listed
Rugged 18 Gauge
Sheet Metal Base
White Powder Coat Finish
High-Impact
ABS Trim Ring
Cable Management
Tie Downs
NSAV62M
FPTV Connection Enclosure
NSAV6C
Description
Color
Catalog Number
2-Gang In-Wall Enclosure
Steel Cover for NSAV6 series
White
White
NSAV62M
NSAV6C
Description
Color
Catalog Number
Standard Power Kit
Surge Protected Power Kit
White
Blue
NSOKP
NSOKPS
Description
Color
Catalog Number
1-Gang Decorator Plate
1-Gang iSTATION Plate
1-Gang 4-Port Keystone Plate
1-Port HDMI Frame
2-Port HDMI Frame
HDMI Snap Fit
F-Connector Snap Fit
USB A-to-B Snap Fit
Cat 6 Snap Fit Jack
White
White
White
White
White
Black
White
White
White
NP26W
IMF1W
NSP14W
NS801W
NS802W
SFHCBK
NSF70W
SFUSBABW
NSJ6W
Power Kits (For use with NSAV62M only)
AV Connectors and Plates
NSOKPS
AV In-Wall and Ceiling Enclosures
NS801W
NSJ6W
Note: See section P for other connector options.
AV Ceiling Enclosure
The AV Ceiling Enclosure is designed to work with active AV devices to
integrate AV distribution, data connections and power in one location,
providing a direct connection to a projector or a display device .
The enclosure comes loaded with two Hubbell 20A duplex receptacles and a
2-gang RACO® box for installation convenience on the job site . An additional
AV/data kit can be added or customized to address all connector, mounting
and patching needs, reducing multiple pieces on site .
• Manage multiple applications inside one enclosure
• Flush mounted, white enclosure for consistent look when mounted in
the ceiling
• Loaded with two Hubbell 20A duplex receptacles and a 2-gang back box
• All steel rugged construction provides the ultimate strength for installation
AVCE1H
AV Ceiling Enclosure
Description
Color
Catalog Number
AV Ceiling Enclosure
White
AVCE1H
Note: Enclosure Includes: Enclosure 24" x 12" x 8", (2) 20 amp duplex receptacles and 2-gang back box.
L-42
www.hubbell-wiring.com
Dimensions in Inches (mm)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement