User manual | Sangean Electronics DDR

Sangean Electronics DDR
GB
Contents
Controls ................................................................................. 2-4
Bass control ........................................................................... 29
Mains operation ....................................................................... 5
Mute function ......................................................................... 30
Operating your radio ............................................................... 6
Display backlight dimmer .................................................... 30
Selecting a station – DAB ...................................................... 7
Factory reset .......................................................................... 31
Display modes – DAB ............................................................ 8
Software version .................................................................... 32
Finding new stations - DAB .................................................... 9
USB socket for software upgrade ........................................ 33
Secondary services – DAB .................................................... 9
Headphone socket ................................................................ 33
Manual tuning – DAB ........................................................... 10
Auxiliary input socket ........................................................... 33
Dynamic Range Control (DRC) – DAB ............................... 11
Line Out socket ...................................................................... 34
Operating your radio – FM auto-tune ................................. 12
Cautions ................................................................................. 34
Manual tuning - FM ............................................................... 12
Specifications ........................................................................ 35
Display modes – FM ............................................................ 13
Circuit features ...................................................................... 35
Presetting stations - DAB and FM ....................................... 14
Recalling a preset station - DAB and FM .......................... 14
Scan sensitivity setting ......................................................... 15
Stereo / Mono setting – FM ................................................. 16
Clock display ......................................................................... 17
Setting the time and the date manually ........................ 18-21
Setting the alarm times .................................................. 22-25
Stop the alarm ....................................................................... 26
Canceling alarms .................................................................. 26
Sleep timer ............................................................................ 27
EQ function ............................................................................ 28
Treble control ......................................................................... 29
1
Controls (front)
GB
1. Loudspeaker
2. Light button
3. Band button
4. Auto tune button
5. Alarm button
6. LCD display
7. Advanced / INFO button
8. Infra-red sensor
9. Volume knob
10. On / StandBy button
11. Tuning control / Select knob
12. Preset buttons
2
Controls (rear)
13. Telescopic aerial for DAB+ / FM
14. USB socket for software upgrade
15. DC power in socket
3
16. Headphone socket
17. Line Out socket
18. Auxiliary input socket
Controls (remote control)
A. On / Standby button
B. Mute button
C. Preset button
D. Select button
E. Tuning Down button
F. Advanced button
G. Auto tune button
H. Band / Auxiliary input Mode button
I. Alarm button
J. Info button
K. EQ button
L. Tuning Up button
M. Sleep button
N. Volume Up or Down buttons
O. Dimmer button
Note:
For the sake of clarity, the instructions for the use of the
controls throughout this instruction manual show the buttons on the
remote control. The buttons on the clock radio can be used if you prefer.
Note:
The operations described below for the panel are the same as the
operations for the remote control.
GB
1. Rotate the Tuning Knob on the panel is the same as pressing the
Tuning Up or Down buttons on the remote control.
2. Press and hold in the Tuning Knob on the panel is the same as
pressing and release the Select button on the remote control.
3. Press and hold in the Info button on the panel is the same as
pressing and release the Advanced button on the remote control.
4. Rotate the Volume Knob on the panel is the same as pressing the
Volume Up or Down buttons on the remote control.
4
Mains operation
1. Place your clock radio on a flat surface.
2. Plug the mains lead into the Socket located on the rear of your clock
radio ensuring that the plug is pushed fully into the socket.
3. Plug the other end of the mains lead into a wall socket and switch on
the wall socket.
5
Operating your radio - DAB
1. Fully extend the telescopic aerial. Fully extend the telescopic aerial
located on the rear of your clock radio. Place the telescopic antenna
so that it is as vertical as possible extending either above or below
the radio.
2. Insert the adaptor plug into the DC socket located on the rear of your
clock radio. Plug the adaptor into a standard mains outlet.
The display will show “Welcome to Digital Radio” for a few seconds
and then the display will show “Time is not set”. (If the radio has been
used before the radio is to find a clock radio stations. After a while
the current time will appear on the display.)
3. Press and release the On / StandBy button to switch on your
clock radio.
4. During the scanning process, the lower line of the display shows a
bar-graph indicating progress of the scan.
5. If the radio has been used before, the last used station will
be selected.
6. When the scanning is completed the first station (in numeric-alpha
order 0...9...A....Z) will be selected.
7. If this is the first time that the radio has not been used, then the first
station in the list of stations found during scanning will be played.
The display will show the station name on the display.
GB
8. If the station list is still empty after the Auto tune your clock radio will
display “No DAB Station”.
9. If no signals are found it may be necessary to relocate your clock
radio to a position giving better reception.
6
Selecting a station - DAB
1. The top line of the display shows the name of the station
currently selected.
2. Press the Tuning Up or Down buttons to scroll through the list of
available stations. Stop pressing the Tuning Up or Down buttons
when you find the station that you wish to hear.
3. Press and release the Select button to select the station. The display
may show “Now Tuning” while your clock radio finds the new station.
4. Adjust the Volume Up or Down buttons to the required settings.
Note:
If there is no sound after selecting a station, press and release the Info
button to check scrolling text, the display continues to show
“Service not available” it may be necessary to relocate your clock radio
to a position giving better reception.
7
Display modes – DAB
Your clock radio has a range of display modes:1. Press and release the Info button to cycle through the various modes.
a. Scrolling Text
Displays scrolling text messages such as
artist/track name, phone in number etc.
b. Signal Strength
Displays a graph showing the signal
strength for the station being received.
c. Program Type
Displays the type of station being listened
to e.g. Pop, Classic, News etc.
d. Multiplex Name
Displays the name of DAB multiplex to
which the current station belongs.
e. Channel & Frequency
Displays the frequency and channel of the
DAB multiplex for the station listened to.
f. Bit Rate & Audio Type
Displays the digital bit rate & audio type
for the station being listened to.
g. Time
Displays the current time.
h. Date
Displays the current date.
GB
8
Finding new radio stations – DAB
As time passes new stations may become available. To find new
stations proceed as follows:1. With the radio switched on and in DAB mode, press and release the
Auto Tune button. The display will show “Scanning...” and your clock
radio will perform a scan of the Band III DAB channels. As new radio
stations are found the station counter on the right-hand side of the
display will increase and the radio stations will be added to the list
stored in the radio.
Secondary services - DAB
1. Certain radio stations have one or more secondary services
associated with them. If a station has a secondary service associated
with it the display will show “>>” next to the station name on the
station list. The secondary service will then appear immediately after
the primary service as you press the Tuning Up or Down buttons
to clockwise.
2. Press and release the Select button to select the station.
3. When the secondary service shuts down, your clock radio will
automatically switch back to the main radio station
(or primary service) if it is available.
9
Manual Tuning – DAB
Manual tuning allows you to tune your clock radio to a particular
DAB frequency. Any new stations found will be added to the station list.
Note that DAB stations are located in the range of 5A-13F.
1. With the radio switched on and in DAB mode, press and release the
Advanced button, the display shows “Manual tune“.
2. Press and release the Select button to enter manual tuning mode.
3. Press the Tuning Up or Down buttons to select the desired
DAB channel.
4. Press and release the Select button to tune to the chosen frequency.
If a signal is present then the channel number and the first part of
DAB multiplex name will be displayed. Any found stations will be
added to the stored list in the radio.
5. Press and release the Select button again to return to the normal
DAB tuning mode.
GB
10
Dynamic Range Control (DRC) - DAB
The DRC facility can make quieter sound easier to hear when your radio
is used in a noisy environment.
There are three levels of DRC compression,
DRC off: DRC is switched off, broadcast DRC will be ignored.
DRC high: DRC is set as sent by broadcaster.
DRC low: DRC level is set to 1/2 that sent by broadcaster.
With the radio switched on and in DAB mode,
1. Press and release the On / StandBy button to switch on your
clock radio.
2. Press and release the Advanced button. The display will show
“Manual tune.”
3. Press the Tuning Up or Down buttons until the display shows “DRC”.
4. Press and release the Select button to enter the adjustment mode.
5. Press the Tuning Up or Down buttons to select the required
DRC setting (the default is off).
6. Press and release the Select button to confirm the setting.
7. Press and release the Info button, the display will return to normal
tuning mode.
Note:
Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
11
Operating your radio – FM auto-tune
Manual tuning – FM
1. Fully extend the aerial located on the rear of your clock radio.
Place the antenna so that it is an straight as possible,
extending either above the radio.
1. Press and release the On / StandBy button to switch on your
clock radio.
2. Press and release the On / StandBy button to switch on your
clock radio.
3. Press and release the Band button to select the FM band.
4. Press and release the Auto Tune button, display will show scanning
and your clock radio will scan from low frequency to high frequency
(or in the direction last scanned). It will stop automatically when it
finds a station of sufficient strength.
5. After a few seconds the display will update. The display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS data present then the radio will display the station name.
2. Press and release the Band button to select the FM band.
Carefully extend the telescopic aerial fully for FM reception.
3. Press the Tuning Up or Down buttons to tune to a station. With each
click of the control the frequency will change up or down by 50 kHz.
4. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
5. Set the Volume Up or Down buttons to the desired settings.
6. To switch off your clock radio press and release the
On / StandBy button.
6. To find additional stations, press and release the Auto Tune button
as before.
7. To scan the FM band in a upward or downward direction
(low frequency to high frequency or high frequency to low frequency),
i.e. clockwise or counter-clockwise, press and hold down the Tuning
Up or Down buttons for 0.5 seconds and then release the Tuning Up
or Down buttons to tune to a station, and then press and release the
Auto Tune button, the frequency will continue following the last
Tuning Up or Down buttons in a upward or downward direction.
GB
8. Adjust the Volume Up or Down buttons to the required setting.
9. To switch off your clock radio press and release the
On / Standby button.
12
Display modes – FM
In FM mode the bottom line of the display can be set to any of the
following display options:1. Press and release the Info button to cycle through each of
the options.
a. Time
Displays the current time.
b. Date
Displays the current date.
c. Radio text (Scrolling text)
Displays scrolling text messages
such as artist / track name,
phone in number, etc.
d. Program type
Displays type of station being
listened to e.g. Pop, Classic,
News, etc.
e. Program Name / Frequency Displays frequency of the station
being listened to.
f. Audio mode
Display shows Stereo or Mono.
Note:
Your clock radio will display “NO Radio Text” on the lower line of the
display if there is no scrolling text available and “NO PTY” if there is no
programme type information.
13
Presetting stations - DAB and FM
Recalling a preset station - DAB and FM
There are 5 memory presets on the panel for each of the 2 wavebands.
However, There are 10 memory presets on the remote control for each
of the 2 wavebands.
1. Press and release the On / StandBy button to switch on the radio.
1. Press and release the On / StandBy button switch on the radio.
3. Momentarily press and release the required Preset button, your radio
will tune to the station stored in preset memory.
2. Select the required waveband by pressing the Band button.
2. Tune to the required station as previously described.
3. Press and hold down the required Preset button until the display
shows e.g. “Preset 1 stored”. The station will be stored under
the chosen preset button. Repeat this procedure for the
remaining presets.
4. Stations stored in preset memories may be overwritten by following
the above procedure.
GB
14
Scan sensitivity setting
Your radio will normally scan for FM broadcasts which are strong
enough to give good reception. However, you may wish the Scan
function to also be able to find weaker signals, possible from more
distant radio transmitters. Your radio includes a local / distant option for
the Scan function in the FM band.
1. Switch on your radio and select FM band by pressing Band button.
2. Press and release the Advanced button. The display will show
“FM scan zone”.
3. Press and release the Select button to enter FM Scan Zone set.
4. Press the Tuning Up or Down buttons to switch between Local and
Distant options. The distant option will allow the radio to find weaker
signals when scanning.
5. Press and release the Select button to confirm your selection.
The Local or Distant setting is stored in the radio and remains in
force until changed or until a Factory Reset.
Note:
The local setting causes the radio to ignore weak signals.
15
Stereo / Mono setting – FM
Your clock radio will play stereo broadcasts in stereo (via headphones)
so long as the received signal is of adequate strength. However, as a
stereo signal becomes weaker, the audio signal will become poorer.
It may be preferable to force the radio to play the station in mono in
order to reduce the level of audio noise.
1. Switch on your clock radio and tune to the required FM radio station
by pressing the Band button.
2. Press and release the Advanced button. The display will show
“FM scan zone”.
3. Press the Tuning Up or Down buttons to switch “Mono override” then
press and release the Select button to enter the Mono override menu.
Display will show “Override off “ if the radio is in Auto stereo mode.
4. Press the Tuning Up or Down buttons and then Press and release the
Select button to switch on the Mono override. While the setting
is stored, the radio will play the current station in mono whether
listening via headphones or the loudspeaker. Mono override is a
temporary setting and is applied to the currently tuned station only.
It is cancelled automatically by tuning to another radio station.
5. If you wish to cancel Mono override while listening to the currently
tuned radio station, press and release the Advanced button then
following above procedures to enter Mono override menu to allocate
Mono override On. Press the Tuning Up or Down buttons to allocate
Mono override off. Press the Select button to switch off the
Mono override. The radio will then play the current station in stereo
through headphones if the signal is sufficiently strong.
GB
Note:
You can also directly press and release the Select button to switch on
the Mono or Stereo mode on the remote control or the panel.
16
Clock display
1. When your clock radio is in Standby mode, the display normally
show the current time, date, month and year.
2. During StandBy mode the clock will receive updates from the last
station tuned to before entering StandBy mode. When in StandBy
mode your radios clock will automatically track Summer / Winter
time changes.
17
Setting the time and the date manually
The DDR-31 Plus will automatically set its clock when tuned to a
DAB radio station or to an FM station which is broadcasting the time
via RDS.
If the clock cannot be set using DAB or FM radio then you will need
to set the time and the date manually before the alarm function can
be used. The time and the date may be set while the unit is in StandBy
mode or while playing.
If it becomes necessary to set the time and the date manually,
please follow these steps:
1. Press and release the On / StandBy button to switch on the radio.
2. Select the required waveband by pressing the Band button.
3. Press and release the Advanced button. The display will show
“FM scan zone”.
4. Press the Tuning Up or Down buttons to switch “System”.
5. Press and release the Select button to enter the Time menu.
6. Press and release the Select button to enter the “Set 12/24 hour“
menu.
7. Press the Tuning Up or Down buttons to switch the “Set 12/24 hour“.
GB
8. Press and release the Select button to confirm your selection.
The 12/24 hour setting is stored in the radio.
9. Press the Tuning Up or Down buttons to switch the “Set Time/Date“.
10. Press and release the Select button to enter the “Set Time/Date“
menu.
18
11. The hour digits on the display will flash. Press the Tuning Up or
Down buttons to change the hour digits as needed.
12. Press and release the Select button to confirm the hour setting.
13. The minute digits on the display will flash. Press the Tuning Up or
Down buttons to change the minute digits as needed.
14. Press and release the Select button to confirm the minutes setting.
15. The day digits on the display will flash. Press the Tuning Up or
Down buttons until the desired day is set.
16. Press and release the Select button to confirm the day setting.
17. The month will flash on the display. Press the Tuning Up or Down
buttons until the desired month is set.
18. Press and release the Select button to confirm the month setting.
19. The year number will flash on the display. Press the Tuning Up or
Down buttons until the desired year is set.
19
20. Press and release the Select button to confirm the year and to
complete the clock and date setting. The Time/Date setting is
stored in the radio.
21. Press the Tuning Up or Down buttons to switch “Auto update”.
22. Press and release the Select button to enter the “Auto update“
menu.
23. Press the Tuning Up or Down buttons to switch the “Auto update“
mode. There are four “Auto update “ modes as Update from Any,
Update from DAB, Update from FM and No update.
24. Press and release the Select button to confirm your selection.
The Auto update setting is stored in the radio.
GB
20
25. Press the Tuning Up or Down buttons to switch “Set date format”.
26. Press and release the Select button to enter the “Set date format“
menu.
27. Press the Tuning Up or Down buttons to switch the
“Set date format “ mode. There are two “Set date format“ modes as
DD-MM-YYYY and MM-DD-YYYY.
28. Press and release the Select button to confirm your selection.
The Auto update setting is stored in the radio.
29. The display will revert to the display for the previous
operating mode.
21
Setting the alarm times
Your clock radio has two alarms which can be set to wake you either
radio or buzzer alarm. Each alarm can be set to sound once, daily,
on weekdays or at weekends.
Note:
If no buttons are pressed for 10 seconds, your clock radio will exit the
alarm set up.
1. The alarm can be set either the radio is on or standby.
2. Press and release the Alarm button to switch the “Alarm 1 Setup” or
the “Alarm 2 Setup” meau.
3. Press and release the Select button to enter the “Alarm 1 Wizard“ or
“Alarm 2 Wizard“ menu.
4. The hour digits on the display will flash. Press the Tuning Up or Down
buttons to change the hour digits as needed.
5. Press and release the Select button to confirm the hour setting.
6. The minute digits on the display will flash. Press the Tuning Up or
Down buttons to change the minute digits as needed.
GB
7. Press and release the Select button to confirm the minutes setting.
The alarm times setting is stored in the radio.
8. The duration digits on the display will flash. Press the Tuning Up or
Down buttons until the desired duration is set. There are five
“Duration“ options as 15, 30, 45, 60, and 90 minutes.
22
9. Press and release the Select button to confirm your selection.
The alarm duration setting is stored in the radio.
10. The source digits on the display will flash. Press the Tuning Up or
Down buttons until the desired source is set. There are three
“Source“ options as FM, Buzzer and DAB.
11. If the alarm source buzzer is chosen, press and release the Select
button to confirm your selection. The alarm source setting is stored
in the radio.
12. The day digits on the display will flash. Press the Tuning Up or
Down buttons until the desired the alarm day is set. There are four
“Alarm day“ options as Once, Weekends, Weekdays, and Daily.
Once: will sound at one time only.
Weekends: will sound only at weekends.
Weekdays: will sound only on weekdays.
Daily: will sound everyday.
13. Press and release the Select button to confirm your selection.
The alarm day setting is stored in the radio.
14. If the alarm source DAB or FM is chosen, press and release the
Select button to confirm your selection. The alarm source setting is
stored in the radio.
15. The station digits on the display will flash. Press the Tuning Up or
Down buttons until the desired station is set. There are two
“Station“ options as the last listened station and the preset stations.
16. Press and release the Select button to confirm your selection.
The alarm station setting is stored in the radio.
Note:
If there is no preset station, the display will show only last listened.
23
17. The alarm day digits on the display will flash. Press the Tuning Up
or Down buttons until the desired the alarm day is set. There are
four “Alarm day“ options as Once, Weekends, Weekdays,
and Daily.
18. Press and release the Select button to confirm your selection.
The alarm day setting is stored in the radio.
19. The lower line of the display will show a bar-graph indicating sound
level of the alarm. Press the Tuning Up or Down buttons until the
desired volume is set.
Note:
The default minimum volume level of the alarm is one.
20. Press and release the Select button to confirm your selection.
The alarm volume setting is stored in the radio.
21. The alarm setup digits on the display will flash. Press the Tuning Up
or Down buttons to switch the alarm setup digits as needed.
There are two “Alarm Setup“ options as On and Off.
GB
24
22. Press and release the Select button to confirm the alarm
setup setting. The alarm setup setting is stored in the radio.
23. The display will show “Alarm saved” and will appear alarm symbol
indicating the alarm is set.
24. Pres the Tuning Up or Down buttons to select Off. The display will
show “Alarm saved” but the display will not appear alarm symbol.
Note:
If the above alarm setting procedures are not completed, the display
will show “Alarm Not saved“. You may have to start over above
procedures again.
25. The alarm has now been set and the unit will revert to the
previous display. The alarm symbol indicator (alarm 1 or 2) will
show on the display.
Note:
You can also press and hold down the Alarm button to switch the
“Alarm 1 Setup” or the “Alarm 2 Setup” menu, when your clock radio is
in Standby mode. Then press and release the Select button to enter the
“Alarm 1 Wizard“ or “Alarm 2 Wizard“ menu as above described.
25
Stop the alarm
When alarm is active, press the On / StandBy button to stop the alarm
(radio and buzzer).
Note:
When alarm is active, press any button (except the
On / StandBy button)to enter into “5 minutes Snooze Mode”.
Canceling alarms
1. Following above alarm setting procedures to allocate alarm On or Off,
select OFF by pressing the Tuning Up or Down buttons then press
Select button to cancel the alarm setting. The alarm symbol will
disappear from the display.
Note:
You can also follow the below procedures of the canceling alarms.
1. The alarm can be set either the radio is on or standby.
2. If the radio is switched on, press and release the Alarm button to
switch the “Alarm 1 Setup” or the “Alarm 2 Setup” meau.
3. Press the Tuning Up or Down buttons to select Off.
4. Press and release the Select button to confirm the alarms setting off.
The alarm setup setting is stored in the radio. The display will show
“Alarm saved” but the display will not appear alarm symbol.
GB
Note:
You can also press and release the Alarm button to switch on or off the
“Alarm 1 Setup” or the “Alarm 2 Setup”, when your clock radio is in
Standby mode. Then press and release the Select button to switch on
or off the “Alarm 1 Setup” or the “Alarm 2 Setup”, when your clock radio
is in Standby mode.
26
Sleep timer
Your clock radio can be set to turn off after a preset time has elapsed.
The sleep timer can be adjusted between 15 and 90 minutes in
15 minutes increments (except 75 minutes). Ensure your clock radio is
switched on.
1. Press and hold down the Sleep button until desired sleep time
appears on the display. Release the Sleep button.
2. The display will show an “
“ indicating sleep timer is set.
3. Press and release the Sleep button to monitor remaining sleep
timer time.
4. To cancel sleep timer, simply press the On / Standby button.
Note:
The Sleep button is on the remote control only. The unit does not has a
Sleep button.
27
EQ function
The sound on your sound system can be adjusted to suit your personal
taste for the material that you are listening to. The DDR-31 plus has six
preset equalizer modes. Alternatively, you may set the treble and bass
levels to your own preferences.
1. Press and release repeatedly the EQ button to cycle through the
various modes until desired equalizer mode appears on the display.
Release the EQ button.
Flat - no tone modification is applied
Jazz
Rock
Classic
Pop
News
Treble - tone setting may be adjusted
Bass - tone setting may be adjusted
Note:
The EQ button is on the remote control only. The unit does not has a
EQ button.
GB
28
Treble control
1. Press the EQ button to cycle through the modes until “Treble”
appears on the display. The current treble setting will be shown on
the display.
2. To adjust the treble setting press and release the Tuning Up or Down
buttons until the desired level is displayed.
Bass control
1. Press the EQ button to cycle through the modes until “Bass” appears
on the display. The current bass setting will be shown on the display.
2. To adjust the bass setting press and release the Tuning Up or Down
buttons until the desired level is displayed.
3. Press the Select button to revert to the play mode display.
Note:
To quickly cancel the effect of the treble or bass settings press the EQ
button until “Flat” appears on the display. The treble and bass settings
will be remembered for the next time that you wish to adjust them.
29
Mute function
Press the Mute button on the remote control of your radio, it will mute
the output from the loudspeaker.
1. Press the Mute button to mute the sound output. The display will
show “Volume Muted“.
2. Press the Mute button again or one of the Volume Up or Down
buttons to un-mute the sound output.
Display backlight dimmer
1. In order to adapt the intensity of the display to suit the ambient
room lighting, press the Light button on the remote control or on your
clock radio to select the dimmer brightness from level zero to level
seven settings.
GB
30
Factory reset
If your clock radio fails to operate correctly or some digits on the
display are missing or incomplete, carry out the following procedures.
1. Press and release the On / StandBy button to switch on your
clock radio.
2. Press and release the Advanced button. When the DDR-31 Plus is
tuned to a DAB radio station, the display will show “Manual tune.”
Note:
Press and release the Advanced button. When the DDR-31 Plus is tuned
to an FM station, the display will show “FM scan zone”.
3. Press the Tuning Up or Down buttons until the display shows
“System”.
4. Press and release the Select button to enter the adjustment mode.
5. Press the Tuning Up or Down buttons until the display shows
“Factory reset”.
6. Press and release the Select button to enter the Factory reset menu.
7. Press the Tuning Up or Down buttons to switch the <No> or <Yes>.
8. Press the Tuning Up or Down buttons to select YES, then press and
release the Select button to start the Reset, the display will appear
“Restarting…”.
9. A full reset will be performed, the station list and presets will
be erased. The display will show “Welcome to Digital Radio“ for a few
seconds and then the flash clock digits and the display will show
“Time is not set”. When the factory reset is complete, you can set
new settings. In case of malfunction due to electrostatic discharge,
reset the product (reconnection of power source may be required) to
resume normal operation.
31
Software version
The software display cannot be altered and is just for your reference.
Ensure your radio is switched on and in DAB or FM mode.
1. Press and release the On / StandBy button to switch on your
clock radio.
2. Press and release the Advanced button. When the DDR-31 Plus is
tuned to a DAB radio station, the display will show “Manual tune.”
Note:
Press and release the Advanced button. When the DDR-31 Plus is tuned
to an FM station, the display will show “FM scan zone”.
3. Press the Tuning Up or Down buttons until the display shows
“System”.
4. Press and release the Select button to enter the adjustment mode.
5. Press the Tuning Up or Down buttons until the display shows
“SW version”.
6. Press and release the Select button to display the software version of
your clock radio.
GB
7. Press and release the Info button to return to the normal radio mode.
32
USB socket for software upgrade
Software updates for your clock radio may be availabe in the future.
As software updates become available software and information on how
to update your radio can be found at
www.sangean.com.tw/index_tw.asp, www.sangean.nl/English,
or www.sangean.com.au.
For more information, please contact our Head Office by sending an
email to info@sangean.com.
Headphone socket
A 3.5mm stereo Headphone Socket located on the rear of your clock
radio is provided for use with either headphones or an earpiece.
Inserting a plug automatically mutes the internal loudspeaker.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause
hearing loss.
Auxiliary Input socket
A 3.5mm stereo Auxiliary Input socket is provided on the rear of your
radio to permit an audio signal to be fed into the unit from an external
audio device such as MP3 or CD player.
1. Connect a stereo or mono audio source (for example, MP3 or
CD player) to the Auxiliary Input socket.
2. Press the Mode button until “AUX IN” is selected on the display.
3. Adjust the Volume Up or Down buttons on your MP3 or CD player to
ensure an adequate signal and then adjust the volume on the radio
for comfortable listening.
33
Line Out socket
1. A 3.5mm stereo Line Out socket is provided on the rear of your sound
system to permit the audio signal to be fed to an external amplifier or
other audio device.
Cautions
Do not allow this radio to be exposed to water, steam or sand. Do not
leave your radio where excessive heat could cause damage such as in a
parked car where the heat from the sun can build up even though the
outside temperature may not seem too high.
Your radio should not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on
the radio.
It is recommended to operate the product such that there is a
minimum distance (10cm recommended) to adjacent objects in
order to ensure good ventilation.
The ventilation of the product should not be restricted by covering it
or its ventilation openings with items such as newspapers,
tablecloths, curtains etc.
GB
No naked flame sources such as lighted candles should be placed on
the product.
It is recommended to avoid using or storing the product at extremes
of temperature. Avoid leaving the unit in cars, on window sills,
in direct sunlight etc.
34
Specifications
Circuit Features
Power Requirements
Mains:
AC 100
240 volts, 50 Hz-60 Hz DC 12V 1A only (switching adaptor)
Loudspeaker: 3”, 8 ohm
Output Power: 7 Watt
Frequency Coverage
FM 87.5 - 108MHz
DAB 174.928 - 239.200MHz
Headphone socket: 3.5mm dia
Auxiliary Input socket: 3.5mm dia
Line out socket: 3.5mm dia
Aerial System:
FM Telescopic aerial
DAB+ Telescopic aerial
The Company reserves the right to amend the specification without notice.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not
be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice. (Waste Electrical and Electronic Equipment Directive)
35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising