Sanyo DC-MX41i Micro Hi-Fi System Instruction manual

INSTRUCTION MANUAL

Micro Hi-Fi System for iPod

DC-MX41i

TABLE OF CONTENTS

SAFETY PRECAUTIONS ..........................................................................................................................................1

ASSEMBLY DRAWING OF UNIT AND SPEAKER..........

............................................................................................3

FEATURES AND CONTROLS............................................................................................................................................5

LCD DISPLAY WINDOW

...........................................................................................................................................6

REMOTE CONTROL ................................................................................................................................................7

PUTTING THE BATTERIES INTO THE REMOTE CONTROL UNIT..................................................................................7

MEMORY BACK-UP

............................................................................................................................................................7

OPERATING THE UNIT.......................................................................................................................................................8

STANDBY/ON......................................................................................................................................................................8

CLOCK SETTING................................................................................................................................................................8

TIMER SETTING.................................................................................................................................................................8

FUNCTION SELECT............................................................................................................................................................9

RADIO OPERATION...........................................................................................................................................................9

CD/MP3/WMA OPERATION.............................................................................................................................................10

ID3 OPERATION................................................................................................................................................................11

USB/SD CARD OPERATION............................................................................................................................................11

REPEAT PLAY FUNCTION...............................................................................................................................................12

PROGRAM FUNCTION.....................................................................................................................................................12

RANDOM PLAY.................................................................................................................................................................13

INTRO PLAY(on the remote control)..............................................................................................................................13

iPod OPERATION.............................................................................................................................................................13

AUX IN PLAY.....................................................................................................................................................................14

TO SET SLEEP FUNCTION..............................................................................................................................................14

EQ CONTROL...................................................................................................................................................................14

MUTE SETTING................................................................................................................................................................15

LISTEN TO THE MUSIC BY USING HEADPHONE.........................................................................................................15

COMPACT DISC...............................................................................................................................................................15

SPECIFICATION...............................................................................................................................................................16

MAINTENANCE................................................................................................................................................................16

TROUBLESHOOTING......................................................................................................................................................17

SAFETY PRECAUTIONS

To achieve the utmost in enjoyment and performance, please read this manual carefully before attempting to operate the unit in order to become familiar with its features, and assure you years of faithful, trouble free performance and listening pleasure.

Important Notes

* Read instructions - All the safety and operating instructions should be read before the apparatus is operated

* Retain instructions - The safety and operating instructions should be retained for future reference.

* Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

* Attachment Do not use attachment not recommended by the product manufacturer as they may cause hazards.

* Power Sources -The apparatus should be connected to a power supply only of the type described in the

operating instructions of as marked on the apparatus.

* “To be completely d isconnected the power input, the mains plug of apparatus shall be disconnected

from the mains.” as the disconnect devices is the mains plug of apparatus.

* Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on

or pinched by items placed upon or against them, paying particular attention to cords at plugs,

convenience receptacles and the point where they exit from the apparatus

* During lntended Use - The mains plug of apparatus should be easily accessed.

* Nonuse Periods - The power cord of the apparatus should be unplugged from the outlet when left

unused for a long period of time.

* This apparatus shall not be exposed to dripping or splashing water and that no object filled with liquids

such as vases shall be placed on the apparatus.

* The apparatus should be situated so that its location or position does not interfere with its proper

ventilation. The ventilation should not be impeded by covering the ventilation openings with items

such as newspaper, table-cloths, curtains etc.

* Do not install this apparatus in a confined space, such as a book case or built-in cabinet. Minimum

distance (about 100mm) around the apparatus for sufficient ventilation.

* No naked flame sources such as lighted candles should be placed on the apparatus.

* Do not use where there are extremes of temperature (below 5°C °

* Sudden changes in the ambient temperature may cause condensation to form on the optical lens inside

the unit. lf this happens, take out the disc, leave the unit for about 1 hour, and then proceed to operate.

* Because of the CD player’s extremely low noise and wide dynamic range, there might be a tendency to

set the volume on the amplifier unnecessarily high.

* Excessive sound pressure from earphones and headphones can cause hearing loss.

* Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

* Attention should be drawn to the environmental aspects of battery disposal.

* The caution marking was located at the back enclosure of the apparatus.

* The nameplate marking was located at the back enclosure of the apparatus.

* The use of apparatus in moderate climates.

ESD Remark: In case of malfunction due to electrostatic discharge, just reset the product

(reconnect of power source may be required) to resume normal operation.

Should any trouble occur, remove the power source and refer servicing to qualified personnel.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

DRIPPING OR SPLASHING.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product.

Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to qualified service personnel.

Note:

- This unit will become warm when used for a long period of time. This is normal and does not indicate a

Problem with the unit.

- The CD player includes micro-processors which may malfunction as a result of external electrical Interference

or noise. If the CD player is not working properly, disconnect the power source and then reconnect it.

- Excessive sound pressure from earphones and headphones can cause hearing loss.

- If an unusual conditions occurs in the display window or key button, switch the unit off, then turn on the unit

again.

1

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DO NOT EXPOSE TO RAIN OR MOISTURE

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS:RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the information accompanying this unit.

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL A LASER DE CLASSE 1

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

CAUTION

CLASS 1 LASER PRODUCT

Operating the unit in a way other than specified herein,or making adjustments to the unit may result in hazardous radiation exposure

You can see this label in the CD compartment.

LASER SAFETY

This unit employs a laser. Only qualified service personnel should attempt to repair.

WARNING: RISK OF INVISIBLE LASER RADIATION WHEN CD LID IS

OPEN OR INTERLOCKS FALL.AVOID DIRECT EXPOSURE TO THE

BEAM.

Model No.:DC-MX41i

Micro Hi-Fi System for iPod

POWER CONSUMPTION: 76W

POWER SOURCE: AC ~ 240V 50Hz

BACK UP FOR CLOCK DC 4.5V

(3XR03 “AAA” SIZE BATTERY)

FREQUENCY RANGE: AM 522~1620 KHz

FM 87.5~108.0 MHz

SANYO Electric Co.,Ltd.

MADE IN CHINA

AU

You can see this label on the back of the main unit.

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.

CUIDADO: PRODUTO LASER DE CLASSE 1 RADIAÇÃO

LASER INVISÍVEL CUANDO ABERTO E SE O DE SEGURANÇA

ESTIVER DEFEITUOSO A EXPOSIÇÃO AOS RAIOS.

ADVARSEL: USYNLIG LASERSTRALING VED ÃBNING NÃR

SIKKERHEDSAFBRYDERE ER UDEAF FUNKTION UNDGA

UDSÆTTELSE FORSTRÃLING,

VARO: AVATESSA JA SUOJALUKITUS OHITETTAESSA OLET

ALTTIINA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE

ÄLÄ KATSO SÄTEESEENI

VARNING: OSYNLIG LASERSTRÄLNING NÄR DENNA DEL

ÄR ÖPPNAD OCHSPÄRREN ÄR URKOPPLAD. BETRAKTA

EJSTRÄLENI

This label sticks inside of the unit.

2

ASSEMBLY DRAWING OF UNIT AND SPEAKER

1 Fixing the whole set of the unit on the wall

Parallel the two nails that fix into the wall, the distance of them should keep in 84mm.

Note : The size of the nail : 3.5*25BA.

84 mm

300 mm

Press down and push the stand panel of the buckle A and B on the rear of the each speaker, and then each stand of the speaker will remove from them.

Parallel the two nails that fix into the wall, the distance of them should keep in 300mm.

Note : The size of the nail : 3.5*25BA.

Press down and push the stand panel of the buckle C and D on the rear of the main unit, and then the stand of the main unit will remove from it.

50 mm

50 mm

Note: When wall-mounting the set of product in line, suggest keeping at least 50mm distance from the main unit to

the speakers to achieve better stereo effect and to ensure the slide CD door with prefect movement.

3

2 Speakers connection

3 Docking bracket and iPod Adjusting pad panel

Universal Dock adapter (Using the Dock Adapters to support all type of the iPod players.)

Connector dock

iPod Adjusting Pad Panel

(Press the iPod Adjusting pad panel lightly out from the lock holder.)

4 Adjust the adjusting pad knob

1

Adjust the Adjusting pad Knob at the level 1 to support these iPod

Players as belows:

Made for iPod with color display

(4th generation)40GB, 60GB only iPod(4th generation)40GB only iPod with video

(5th generation)30GB only iPod classic 80GB iPod classic 2nd generation 120GB

3

Adjust the Adjusting pad Knob at the level 3 to support these iPod

Players as belows:

Made for iPod nano

(1st generation)1GB, 2GB, 4GB only iPod touch 8GB/16GB/32GB iPod touch 2nd generation

8GB/16GB/32GB

2 iPod Adjusting Pad Panel ( Let the iPod Players easy to insert into the connector fixedly, and then press and push them toward the lock holder until it snaps on.)

Adjust the Adjusting pad Knob at the level 2 to support these iPod

Players as belows:

Made for iPod mini

(1st generation)4GB, 6GB only iPod(4th generation)20GB only

U2 Special Edition iPod with color display

(4th generation)20GB, 30GB only

U2 Special Edition iPod with video

(5th generation)60GB,80GB only iPod classic 160GB

4

FEATURES AND CONTROLS

1

45

31

35

34

36

3

4

5

6

2

26 43 27 28 29

7 8 9 10 11 12 13 14

21

20

18

17

16

15

25

24

23

22

44

19

33

32

39

38

37

33

30

40

41

42

5

FEATURES AND CONTROLS

1. SPEAKER

2. SPEAKER STAND

3. STANDBY LED INDICATOR

4. SD/MMC CARD IN SLOT

5. HEADPHONES JACK

6. USB DEVICE IN PORT

7. iPod OPEN/CLOSE BUTTON

8. STANDBY/ON BUTTON

9. CD OPEN/CLOSE BUTTON

10.SLEEP BUTTON

11.ID3/MONO/ST. BUTTON

12.iPod/MEM/CLOCK-ADJ. BUTTON

13.TIMER BUTTON

14.RANDOM BUTTON

15.MUTE BUTTON

16.PRESET/FOLDER DOWN BUTTON

17.PRESET/FOLDER UP BUTTON

18.EQ TOUCH PLATE

19.STOP/MENU TOUCH PLATE

20.VOLUME DOWN TOUCH PLATE

21.SKIP/TUNE SEARCH DOWN TOUCH PLATE

22.VOLUME UP TOUCH PLATE

23.FUNCTION TOUCH PLATE

LCD DISPLAY WINDOW

24. IR SENSOR

25.LCD DISPLAY WINDOW

26.CD DOOR

27.REPEAT TOUCH PLATE

28.BAND TOUCH PLATE

29.PLAY/PAUSE/ENTER TOUCH PLATE

30.FM ANTENNA

31.SPEAKER OUT “L”

32.AM EXTERNAL ANTENNA

33.MAIN UNIT STAND

34.DOCKING BRACKET

35.iPod ADJUSTING PAD KNOB

36.iPod CONNECTOR

37.SPEAKER OUT “R”

38.LINE IN JACK

39.HITCHING HOLE

40.MEMORY BACK-UP BATTERY DOOR

41.AC POWER SWITCH

42.AC POWER CORD

43.iPod PLAYER DOOR

44.SKIP/TUNE SEARCH UP TOUCH PLATE

45.AM EXTERNAL ANTENNA SOCKET

A. TIMER INDICATOR

B. ALBUM/RADIO MEMORY NUMBER INDICATOR

C. REPEAT 1 & ALL INDICATOR

D. STEREO INDICATOR

E. VOLUME HIGH/LOW INDICATOR

F. SLEEP INDICATOR

G. TRACK/NUMBER/TIME INDICATOR

6

REMOTE CONTROL

1. STANDBY/ON BUTTON

2. MUTE BUTTON

3. PRESET/FOLDER UP BUTTON

4. PRESET/FOLDER DOWN BUTTON

5. SKIP/TUNE SEARCH DOWN BUTTON

6. BAND BUTTON

7. INTRO BUTTON

8. ID3/MONO/ST. BUTTON

9. RANDOM BUTTON

10.VOLUME UP BUTTON

11.FUNCTION BUTTON

12.CD OPEN/CLOSE BUTTON

13.VOLUME DOWN BUTTON

14.iPod OPEN/CLOSE BUTTON

15.PLAY/PAUSE/ENTER BUTTON

16.EQ BUTTON

17.SKIP/TUNE SEARCH UP BUTTON

18.STOP/MENU BUTTON

19.SLEEP BUTTON

20.iPod/MEM/CLOCK-ADJ. BUTTON

21.TIMER BUTTON

22.NUMBER SEARCH BUTTON

23.REPEAT BUTTON

5

6

7

8

9

1

2

3

4

10

11

12

13

14

15

16

17

18

19

20

21

22

23

PUTTING THE BATTERIES INTO THE REMOTE CONTROL UNIT

Press down the compartment cover, and slide the cover off to open the compartment. Place the two

(UM4), (AAA), (R03) batteries in the remote control according to the polarity markings ("+" and "-”) inside the compartment and on the batteries.

Place the cover over the compartment, press down lightly, and push it upward until it snaps on.

**BATTERIES NOT INCLUDED**

BATTERY PRECAUTIONS

Follow these precautions when using a battery in this device:

1. Warning -Danger of explosion if battery is incorrectly

replaced. Replace only with the same or equivalent type.

2. Use only the size and type of battery specified.

3. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment.

A reversed battery may cause damage to the device.

4. If the device is not to be used for a long period of time, remove the battery to prevent damage or injury from possible

battery leakage.

5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery

manufacturer's directions.)

6. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

MEMORY BACK-UP

To insert 1.5V x 3, UM-4, R03 AAA or equivalent batteries in the battery compartment of the unit. It is used to back-up the memory of the main CPU.

7

OPERATING THE UNIT

Before operating the unit for the first time, make sure the AC power cord is properly connected to a 240V 50Hz

AC outlet, then press the power ON switch on the rear of the unit, the unit will be in standby mode, the backlight of standby is red. You can now press the STANDBY/ON button on the unit or press the STANDBY/ON button on remote control to switch the unit ON. The backlight of the standby will be off and multi function touch plate will light on blue.

Pull the AC plug out of the wall socket if you want to switch off completely.

STANDBY/ON

1. Press the STANDBY/ON button on the unit or remote control to switch the unit on.

2. Select the sound source (CD, USB, CARD, iPod, AUX or TUNER) by touching the FUNC on the unit or press the

FUNCTION button on remote control. The corresponding display will light up.

3. Adjust the volume with the VOL or VOL on the unit or remote control.

4. Press the STANDBY/ON button on the unit or remote control again to turn off the unit.

Note: 1. During in standby mode, press any button/key can make the display light for 10 seconds.

2. Please turn the main switch off to save energy, when you do not use the unit.

CLOCK SETTING

During in the STANDBY mode.

1. Press and hold the iPod/MEM/C-ADJ. button until the time displays will change to 24-hour format and flash.

2. Touch or on the unit or press or button on the remote control to select 12-hour or 24-hour.

3. Press the iPod/MEM/C-ADJ. button again, the HOUR digit will flash on the display, touch or to adjust

HOUR.

4. Press the iPod/MEM/C-ADJ. button once more, the MINUTE digit will flash on the display, touch or

to adjust minute.

5. Press the iPod/MEM/C-ADJ. button again to confirm the time.

6. Each enable state as shown above will be cleared if the key is not pushed in10 seconds.

TIMER SETTING

1. After adjusting the clock, press the TIMER button for a few seconds, " ON" and "00:00" appear on the display and

the HOUR digit flashes.(F1)

2. Touch or on the unit or press or button on the remote control to adjust it.

3. Press the TIMER button again, the MINUTE digit will start flashing, adjust it by t ouching or on the unit or

press or button on the remote control.

4. Press the TIMER button once more to confirm and order TIMER ON time.

5. After adjusting "TIMER ON", " OFF" appears on the display and the HOUR digit flashes.(F2)

6. Repeat the above steps 2 to 3, and then press the TIMER button once more to confirm and order TIMER OFF time.

7. Now the "TUNER" appears on the display with flashing, and then select the alarm mode of the “ TUNER, CD, USB,

CARD or IPOD" by touching or on the unit.

8. Press the TIMER button again, the timer "VOL" indicator appears on the display and flashes, adjust the timer

volume high or low by t ouching or on the unit or press the or button on the remote control.

9. Each enable state as shown above will be cleared if the button is not pushed in 10 seconds.

10.After adjusting "TIMER ON" and "TIMER OFF", press the TIMER button, " “ appears on the display.

11.The main unit will be switched on automatically at "TIMER ON" order and start playing, the main unit will be

switched off automatically at "TIMER OFF" order.

Note: If the display shows "ERROR" while you set the “TIMER ON”, it means both “TIMER ON” and “TIMER OFF” is

the same. In this case, please go to “TIMER OFF” to set the off time first. To switch TIMER function ON or OFF,

press TIMER button.

8

FUNCTION SELECT

Touch FUNC on the unit or press the FUNCTION button on the remote control to change the mode of each function.

Display changes as below:

CD USB CARD

TUNER

IPOD AUX

RADIO OPERATION

Touch FUNC on the unit or press the FUNCTION button on remote control to select TUNER.

1. Touch BAND on the unit or press the BAND button on remote control to select AM or FM.

2. Touch or on the unit or press the or button on the remote control to tune the desired station.

Manual Tuning

To tune for weak stations, use manual tuning by t ouching the or continuously until you read the correct frequency or the reception is at its best.

Automatic Tuning

1. Touch or on the unit or press the or button on the remote control for a second or more, then

release the button. The tuner will automatically search the first station of sufficient signal strength.

2. Repeat above procedure if you wish to select another station.

Mono/stereo select

You can select the MONO/STEREO only in FM mode.

1. When you want to select FM stereo station, press the ID3/MONO/STEREO button .

When you receive a FM stereo station the " " indicator will appear on the display, you can receive FM stereo

transmission .

2. When you press the ID3/MONO/STEREO button again, the FM STEREO indicator will turn off and switch to MONO

FM status.

Programming preset stations

You can also preset stations of your choice and store up to10 AM and 30 FM stations in its memory. To store your selected broadcasting stations:

1. Touch BAND on the unit to toggle between AM and FM to make your selection.

2. Tune to the desired station.

3. Press the iPod/MEM/C-ADJ. Button.

4. Press the PRESET/FOLDER ▲ or ▼ button for your desired station number.

5. Press the iPod/MEM/C-ADJ. button again to confirm your selection.

6. To program more stations into memory, repeat the above steps 2 to 5.

7. To change the stored preset stations, repeat the above steps 2 to 5.

Note:

Storing a new station into a preset location will erase the previously stored station in that location.

Selecting the Preset Stations

1. Touch BAND on the unit or press the BAND button on the remote control to select the desired band.

2. Press the PRESET/FOLDER ▲ or ▼ button to select the desired preset station number.

3. The location number of preset station is displayed along with the corresponding requency.

FM Antenna

For better FM reception, change the position of FM antenna wire.

AM external aerial loop operation

Adjust the position of AM external aerial loop for better AM frequency signal.

9

CD/MP3/WMA OPERATION

Listening To Compact Disc (CD/MP3/WMA)

1. If you want to enjoy CD/MP3, press the STANDBY / ON button on the unit or remote control and then

press the CD OPEN/CLOSE button once on the unit first, and then the CD door will open automatically.(F3)

2. Insert the CD/MP3 disc into the CD compartment, press the CD OPEN/CLOSE button again, and then the CD door

will close automatically.

3. Touch FUNC on the unit or press the FUNCTION button on the remote control to select CD mode. The unit will read

the CD/MP3/WMA disc automatically.

Note: (1) This unit can play CD, CD-R, CD-RW, MP3 and WMA discs.

(2) It can read " 8 cm " and " Multi Section " of MP3 DISC.

(3) The "Playback Transfer Rate" in MP3 and WMA.

a. In MP3, transfer bit rate : 8 - 256 kbps.

b. In WMA, transfer bit rate : 8 - 192 kbps.

(4) The "Max Readable 99 folders and 999 tracks".

(5) If no disc or can`t read TOC, NO DISC will be displayed.(F4)

F3 F4

Playing The Entire CD/MP3/WMA

- CD

1. Insert the CD disc into the CD compartment and then touch FUNC on the unit to select CD mode, the main unit will

automatically read the total number of the tracks at the same time.

2. Touch /ENTER on the unit or press the /ENTER button on the remote control, the unit will play the first

track of the CD disc automatically.(F5)

3. Touch /ENTER on the unit or press the /ENTER button on the remote control once again, the time elapsed

indicator will flash and pause CD playback.(F6)

4. Touch or once to change Track NO., touch and hold or on the unit to skip fast forward or backward

of each song.

5. To resume playback, t ouch /ENTER on the unit or press the /ENTER button on the remote control once

more again.

6. To stop playback, touch /MENU on the unit or press the /MENU button on the remote control once.

F5

F6

IMPORTANT IN FORMATIONS

- Copyright protection files cannot be played back.

- Copyright protection files on a disc are skipped automatically when played back.

- MP3/WMA

1. Insert the MP3/WMA disc into the CD compartment and then touch FUNC on the unit to select CD mode, the

main unit will automatically read the total number of the folders and tracks at the same time.

2. Touch /ENTER on the unit or press the /ENTER button on the remote control, the unit will play the first track

of the MP3/WMA disc automatically.(F7)

3. Touch /ENTER on the unit or press the /ENTER button on the remote control once again, the time elapsed

indicator will flash and pause MP3/WMA disc playback.(F8)

4. To change Track NO., touch or on the unit or press the or button on the remote control.

Touch and hold or on the unit to skip fast forward or backward of each song.

5. To resume playback, touch /ENTER on the unit or press the /ENTER button on the remote control once

more again.

6. To change the ALBUM NO., press the PRESET/FOLDER ▲ or ▼ once.

7. To stop playback, touch /MENU once on the unit.

10

F7 F8

Note: If the main unit is not working properly, disconnect the power source and then reconnect it again.

ID3 OPERATION

During in the MP3/WMA mode

1. Press the ID3/MONO/STEREO button on the unit (or remote control) once to open the ID3 function.

2. If the MP3/WMA file is written in “ID3”, it will automatically search the information of “TITLE NAME”, “ARTIST NAME” and “ALBUM NAME” indicated on the display.

3. Press the ID3/MONO/STEREO button on the unit (or remote control) again. Then the unit will resume to play

normally.

USB/SD CARD OPERATION

During in the STANDBY mode

1. Insert the USB DEVICE or SD/MMC CARD, and then press the STANDBY/ON button on the main unit (or remote

control) to turn on the unit.

2. T ouch FUNC on the main unit to select the USB or CARD mode. The main unit will automatically read the total

number of the folders and tracks at the same time. (F9)

3. If the USB memory device or SD/MMC CARD has more than one folder.

a. Press the PRESET/FOLDER ▲ or ▼ button to select each folder.

b. T ouch or to select a track in the desired folder.

4. Touch /ENTER on the unit or press the /ENTER button on the remote control, will start playback from

the selected track. The display shows the current track number and its elapsed time.(F10)

5. To pause playback, t ouch /ENTER on the unit or press the /ENTER button on the remote control.

The time elapsed indicator will flash.(F11)

6. To resume playback, t ouch /ENTER on the unit or press the /ENTER button on the remote control again.

7. To stop playback, t ouch /MENU.

F9 F10 F11

Note: 1. In any time, the USB DEVICE or SD CARD must be fixed well under in the STANDBY mode to avoid the main

unit and USB DEVICE or SD CARD were damaged.

2. This unit can support most of USB devices and SD/MMC cards. The memory capacity up-to 2GB. It can not

access (or access a longer time) the memory capacity over 2GB. Otherwise, make an others to access it.

3. It can support USB version 1.1 and 2.0.

4. If the WMA file is a protected "DRM FILE" the display will show "PROTECT".

IMPORTANT INFORMATIONS

- Copyright protection files cannot be played back.

- Copyright protection files on the USB memory and SD/MMC card device are skipped automatically when played back.

- Recommended use:

Flash memory type USB memory player

- Not recommended:

Hard disc memory type USB player

- Some Flash memory player will not play successfully with this unit.

11

REPEAT PLAY FUNCTION

- CD

1. T ouch REPE on the unit or press the REPEAT button on the remote control once, "REPEAT" is displayed.

CD will play the current track repeatedly.(F12)

2. T ouch REPE on the unit or press the REPEAT button on the remote control again, "REPEAT ALL" is displayed. CD

will play all tracks repeatedly.(F13)

3. T ouch REPE on the unit or press the REPEAT button on the remote control again, REPEAT function will be off.

F12 F13

- MP3/WMA/USB/SD CARD

1. T ouch REPE on the unit or press the REPEAT button on the remote control once, then"REPEAT” is displayed. It will

play the current track repeatedly.(F14)

2. T ouch REPE on the unit or press the REPEAT button on the remote control again, "REPEAT ALL" is displayed. It will

play all tracks repeatedly.(F15)

3. T ouch REPE on the unit or press the REPEAT button on the remote control again, “REPEAT ALBUM" is displayed.

It will play all tracks in the current folder repeatedly .(F16)

4. T ouch REPE on the unit or press the REPEAT button on the remote control once more again, then REPEAT

function will be off.

F14 F15

F16

PROGRAM FUNCTION

You can make the program up to 32 tracks in CD mode or 64 tracks in MP3/WMA/USB/SD CARD mode in any desired order. Program mode is activated while in stop mode.

1. Programme

- CD

1) Press the iPod/MEM/C-ADJ. button in stop mode, shift to MEMORY mode.(F17)

2) T ouch or on the unit or press the or button on remote control, the track number will be changed.

3) Press the iPod/MEM/C-ADJ. button to confirm the track number.

- MP3/WMA

1) Press the iPod/MEM/C-ADJ. button in stop mode, shift to MEMORY mode. The album number is flashing. (F18)

2) Press the PRESET/FOLDER ▲ or ▼ button on the unit or remote control, the album number will be changed.

3) Press the iPod/MEM/C-ADJ. button, the first track number will be displayed.(F19)

4) T ouch or on the unit or press the or button on remote control , the track number will be changed.

5) Press the iPod/MEM/C-ADJ. button to confirm the favorite track number.

F17

F18 F19

2.PROGRAM PLAY

T ouch /ENTER on the unit or press the /ENTER button on remote control. The unit will play the first track of the program. When all tracks have been played, the unit will stop automatically. If you want to listen program play again, touch /ENTER again.

12

3. CANCEL PROGRAM

1. T ouch /MENU on the unit or press the /MENU button on remote control twice, or open the CD tray door and close

it again then the memory will be erased.

2. Set a new program, the existing one will be cleared.

4. Checking the programme

During stop mode, the display will show the corresponding programmed song when press the iPod/MEM/C-ADJ. button.

Note : During in the program mode.

1. T ouch REPE on the unit or press the REPEAT button on the remote control once, the "REPEAT" indicator will light on

the display. Then the unit will repeat the current track.

2. T ouch REPE on the unit or press the REPEAT button on the remote control again, the "REPEAT ALL" will light on the

display. Then the unit will repeat all the programmed tracks.

3. T ouch REPE on the unit or press the REPEAT button on the remote control once more again. The unit will return to

play the program in normally.

RANDOM PLAY

1. Press the RANDOM button on the unit (or remote control), then RANDOM is displayed.(F20)

2. Press the RANDOM button again, then the unit will resume to normally play.

F20

INTRO PLAY(on the remote control)

1. Press the INTRO button on the remote control, INTRO is displayed. Will play the first 10 seconds of each track.(F21)

2. Press the INTRO button again, then the unit will resume to normally play.

F21

Note: To avoid damaging the iPod, please make sure to insert or take out the iPod in standby mode.

During the unit in STANDBY mode:

1. Press the iPod OPEN/CLOSE button once on the unit first to open the iPod door.

2. Insert the iPod players in the iPod docking bracket on the front of the main unit fixedly.

3. Press the STANDBY/ ON button on the main unit, and then t ouch FUNC on the unit or press the FUNCTION button

on remote control to select iPod mode, the iPod indicator will appear on the main unit display. (F22)

4. T ouch /ENTER on the unit or press the /ENTER button on the remote control once to start the iPod

playing. Adjust the volume level by touching VOL or VOL on the unit or press the VOLUME + or VOLUME -

button on the remote control

.

5. T ouch /ENTER on the unit once to pause the current track. To resume the playback, touch /ENTER on

the unit again.

6. To skip forwards or backwards, t ouch or to select the desired track.

7. Touch REPE or press the RANDOM button to make the iPod playing repeatedly or randomly.

Note: iPod touch version 1.1.4 or above can support REPEAT or RANDOM function.

8. To stop playback, touch /MENU on the unit.

During the unit in iPod MENU mode:

1. During the unit in iPod mode, press the iPod/MEM/C-ADJ. button once, the unit will enter to the iPod MENU mode.

The display of main unit will show "IPODMENU". (F23)

2. Touch /MENU repeatedly to go to the main menu in your iPod.

3. T ouch or to search the menu on the iPod.

13

4. T ouch /ENTER to enter the selected menu.

5. T ouch or to search the current content in the each desired menu.

6. To return to the previous menu, t ouch /MENU.

7. To resume playback, press the iPod/MEM/C-ADJ. button once again, the unit will return to iPod mode.

Charging the iPod Player battery through the main unit:

1. If the iPod player is connected to the unit. The iPod will be charged automatically.

2. You can charge the iPod Player in STANDBY MODE or POWER ON mode.

Note : 1. The iPod Player battery is 80-percent charged in about one hour, and fully charged in about a few hours. If

you charge it while playing music, it may take longer.

2. It is not better to charge under the TUNER mode. It may interfere the reception.

Note:

1. In any time, you can control the iPod player on the main unit, remote control or iPod player itself while the unit

in the "iPod" or "iPod MENU" mode.

2. In any time, the iPod player must be fixed well under in the STANDBY mode to avoid the unit and iPod player

were damaged.

3. During the unit in iPod mode, if the video function of the iPod cannot work properly. Update the latest version of the

iPod video function from the apple web-site.

F22 F23

AUX IN PLAY

1. Use a cable with RCA jack to connect external audio source (DVD player, Mini Disc player, Cassette Deck etc.) to the

LINE IN jack on the right of the unit.

2. Touch FUNC on the unit or press the FUNCTION button on the remote control repeatedly until the "AUX” appears on

the display.

3. Turn your auxiliary source "ON" and operate it as usual. The sound from the auxiliary source will be heard through

the speakers of the unit.

Note: Aux in cable not included.

TO SET SLEEP FUNCTION

1. If you want to fall asleep with music, press the SLEEP button.(F24)

F24

2. Press SLEEP button repeatedly to change and select from 90 to 80, 70, 60, 50, 40, 30, 20, 10 minutes. You

may select the TUNER, CD, USB, CARD or IPOD mode in sleep function.

3. After the unit plays for your selected time, it will shut down automatically. While the SLEEP function is

activated, press SLEEP button once and the remained sleep time will be shown. Press SLEEP button

again to select another sleep time.

EQ CONTROL

EQ shows the present sound tone.

When you t ouch EQ or press the EQ button on the remote control, the sound tone changes as below:

14

MUTE SETTING

1. When you press the MUTE button once, the volume level indicator will flash and the audio output will be temporarily

terminated.(F25)

2. Press the MUTE button again, the volume level indicator and the audio output will return to normal.

F25

LISTEN TO THE MUSIC BY USING HEADPHONE

A stereo headphone jack is provided for private listening. To listen to the unit with headphones(not included ), insert the 3.5mm mini-stereo plug into the PHONES( ) jack on the front panel. The external speakers are automatically disconnected when headphones are using.

COMPACT DISC

1. Always use a compact discs bearing the mark as shown.

2. Notes on handling discs

Removing the disc from its storage case and loading it.

* Do not touch the reflective recorded surface.

* Do not stick paper or write anything on the surface.

* Do not bend the disc.

3. Storage

* Store the disc in its case.

* Do not expose discs to direct sunlight or high temperatures, high humidity or dusty places.

4. Cleaning a disc

* When the disc become soiled, wipe off dust, dirt and fingerprints with a soft cloth.

* The disc should be cleaned from the center to the edge.

FROM THE CENTRE TO THE EDGE

CORRECT INCORRECT

* Never use benzene, thinners, record cleaner fluid or anti static spray.

* Be sure to close the CD door so the lens is not contaminated by dust.

* Do not touch the lens.

15

SPECIFICATION

POWER SUPPLY : AC240V~50Hz

OUTPUT POWER : 10 Watts x 2

UNIT DIMENSION : 400 (W) x 154 (D) x 211 (H) mm

SPEAKER BOX DIMENSION : 160 (W) x 154 (D) x 211 (H) mm

N. W. : 5.1 kg

RADIO SECTION

FREQUENCY RANGE : FM 87.5 - 108 Mhz

AM 522 - 1620 KHz

COMPACT DISC SECTION

CD Media CD-DA, CD-ROM, CD-R, CD-RW

Supported format ISO 9660, UDF

Type 2 channel stereo

Pickup Optical 3-beam semiconductor laser

Laser output 0.6mW (Maximum continuous wave)

Wave length 790nm

Wow/Flutter Below measurable limits

MP3 Decode File MPEG 3

Bit rate (kbps) 8-320 constant & Variable bit rate (VBR)

ID3 tag Yes

Max folder / file no. USB 99/999

CD-rom and SD card 99/999

Max files per folder 999

Folder /file name 32/32 (maximum number of bytes)

ID3 title / artist/album 64/64/64 (maximum number of bytes)

WMA Decode File Windows media audio 9

Bit rate (kbps) 8-192

Max folder / file no USB 99/999

CD-rom and SD card 99/999

Max files per folder 999

Folder /file name 32/32 (maximum number of bytes)

ID3 title/artist/album 64/64/64 (maximum number of bytes)

AUX input Max voltage 500mV

Impedance 47Ω

Operating conditions Temperature: 5°C to 35°C

Humidity 5% to 90%

Operating position Horizontal

SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.

Ventilation warning : " The normal ventilation of the product shall not be impeded for intended use."

MAINTENANCE

Cleaning the unit

Clean the outside of the unit with a clean soft cloth, moistened with lukewarm water. Do not use benzene, thinners, or alcohol since they will damage the finish of the surfaces.

Cleaning the CD player Iens

The lens should never be touched. If dust is on the lens, blow it off using a camera lens blower (F. A).

(Consult your dealer.)

F. A

16

16

TROUBLE SHOOTING

SYMPTOM

POSSIBLE CAUSE CORRECTIVE ACTION

No power

No mains lead plug connection at the AC outlet.

Insert the plug into the AC outlet.

The power is on, but the CD player does not work.

No disc is loaded.

Load a disc.

Sound is heard from one speaker.

Faulty connection of speaker wires.

Connect the speaker wires firmly to the speaker terminals.

The CD player does not start playback. No disc is loaded.

Loaded a disc.

An unplayable disc is loaded. Load a playable disc.

The disc is not loaded correctly.

Load the disc with the label facing up on the disc tray.

The disc is dirty.

Clean the disc or replace it.

The CD player does not start playback and

“NO FILE” appears.

An unplayable disc is loaded. Load a playable disc.

The disc is not loaded correctly.

Load the disc with the label facing up on the disc tray.

The remote controller does not work properly. The batteries in the remote controller are weak, or installed incorrectly.

Check the battery polarity (+ or -). Replace the battery.

The remote controller is not aimed at the remote sensor window.

Aim the remote controller at the remote sensor window.

No sound.

Volume control is set to minium.

Turn up the volume.

The wrong function is selected.

Select the correct function.

Faulty speaker connections.

Connect the speaker wires firmly to the speaker terminals.

The operation of the unit or display is not normal.

The unit must be reset.

1. Disconnect the main lead and replug again.

2. Resume operations.

The file in USB or SD card cannot play back. USB device is not connected.

Connect the USB device. SD card is not loaded.

Load the SD card.

The file is copyright protection file. Select the correct playable files.

FM stereo broadcast is hard to hear due to much noise.

Weak signal.

Press the FM MODE/INTRO button to display

“MONO”.

Reorient the FM aerial wire. Connect the speaker wires firmly to the speaker terminals.

17

The unit supports the listed iPods

**

iPod charge and operation only

**

***iPods shown are not included***

Made for iPod mini

(4GB, 6GB only)

Made for iPod

(4th generation)

(20GB only)

Made for iPod

(4th generation)

(40GB only)

Made for iPod with color display

(4th generation)

(20GB, 30GB only)

Made for iPod with

color display

(4th generation)

(40GB, 60GB only)

Made for iPod with video

(5th generation)

(30GB only)

Made for iPod with video

(5th generation)

(60GB, 80GB only)

Made for iPod nano

(1st generation)

(1GB, 2GB, 4GB only)

Made for iPod nano

(2nd generation)(aluminum)

(2GB, 4GB, 8GB only)

Made for iPod nano

(3rd generation)(video)

(4GB, 8GB only)

Made for iPod nano

(4th generation)

(8GB, 16GB only)

Made for iPod classic

(80GB, 160GB only)

Made for iPod classic

(2nd generation)

(120GB only)

Made for iPod touch

(8GB, 16GB, 32GB only)

Made for iPod touch

(2nd generation)

(8GB, 16GB, 32GB only)

CODE NO.:112114701

SANYO Electric Co., Ltd.

Printed in China