BAT30 Small signal Schottky diodes Features -

BAT30 Small signal Schottky diodes Features -
BAT30
Small signal Schottky diodes
Datasheet - production data
Features
BAT30JFILM
(Single)
• Very low conduction losses
• Negligible switching losses
SOD-323
• Low forward and reverse recovery times
BAT30KFILM
(Single)
• Extremely fast switching
• Surface mount device
SOD-523
• Low capacitance diode
BAT30LFILM
(Single)
SOD-923
Description
BAT30FILM
(Single)
BAT30AFILM
(Common anode)
SOT-23
BAT30SFILM
(Series)
The BAT30 series uses 30 V Schottky barrier
diodes encapsulated in a wide range of packages
such as SOD-323, SOD-523, SOD-923, SOT-23,
SOT-323, or SOT-666. This device is specially
suited for switching mode applications needing
low forward voltage drop diodes.
Table 1. Device summary
BAT30CFILM
(Common cathode)
BAT30WFILM
(Single)
BAT30CWFILM
(Common cathode)
SOT-323
Symbol
Value
IF
300 mA
VRRM
30 V
C(typ)
14 pF
Tj (max)
150 °C
BAT30AWFILM
(Common anode)
BAT30SWFILM
(Series)
BAT30-07P6FILM
(2 parallel diodes)
A
SOT-666
A
BAT30-09P6FILM
(2 opposite diodes)
A
Configurations in top view
April 2014
This is information on a product in full production.
DocID12564 Rev 4
1/14
www.st.com
Characteristics
1
BAT30
Characteristics
Table 2. Absolute ratings (limiting values at Tj = 25° C, unless otherwise specified)
Symbol
VRRM
IF
Parameter
Value
Unit
Repetitive peak reverse voltage
30
V
Continuous forward current
300
mA
1
A
-65 to +150
°C
IFSM
Surge non repetitive forward current
Tstg
Storage temperature range
tp = 10 ms Sinusoidal
Tj
Maximum operating junction temperature
150
°C
TL
Maximum soldering temperature
260
°C
Value
Unit
Table 3. Thermal parameters
Symbol
Rth(j-a)
Parameter
Junction to ambient(1)
SOT-23
500
SOT-323, SOD-323,
550
SOD-523, SOT-666
600
SOD-923
900
°C/W
1. On epoxy printed circuit board with recommended pad layout
Table 4. Static electrical characteristics
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
VR = 5 V
-
-
0.5
VR = 10 V
-
-
1
VR = 25 V
-
0.65
3
VR = 30 V
-
-
5
-
7
20
-
18
50
IF = 0.1 mA
-
-
240
IF = 1 mA
-
-
300
IF = 10 mA
-
-
375
Tj = 25° C IF = 30 mA
-
-
430
IF = 100 mA
-
-
500
IF = 200 mA
-
-
580
IF = 300 mA
-
530
-
Tj = 25 °C
IR(1)
Reverse leakage current
Tj = 70 °C
Tj = 85 °C
VF(2)
Forward voltage drop
VR = 10 V
1. Pulse test: tp = 5 ms, δ < 2 %
2. Pulse test: tp = 380 µs, δ < 2 %
2/14
DocID12564 Rev 4
Unit
µA
mV
BAT30
Characteristics
Table 5. Dynamic characteristics
Symbol
Test conditions
Parameter
C
Diode capacitance
Min.
Typ
Max.
VR = 0 V, F = 1 MHz
-
22
-
VR = 1 V, F = 1 MHz
-
14
-
VR = 10 V, F = 1 MHz
-
6
-
Figure 1. Power dissipation versus average
forward current
Unit
pF
Figure 2. Average forward current versus
ambient temperature (δ = 1)
IF(AV) (A)
P (W)
0.175
0.35
δ=0.05
0.150
δ=0.1
δ=1
δ=0.5
δ=0.2
0.30
0.125
0.25
0.100
0.20
0.075
0.15
0.050
0.10
T
0.025
IF(AV) (A)
0.000
0.00
δ=tp/T
T
0.05
tp
δ=tp/T
Tamb (° C)
tp
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
Figure 3. Relative variation of thermal
impedance junction to ambient versus pulse
duration
0
25
50
75
100
125
150
Figure 4. Relative variation of thermal
impedance junction to ambient versus pulse
duration
Zth(j-a) /Rth(j-a)
Zth(j-a) /Rth(j-a)
1.E+00
1.E+00
Single pulse
SOT-23
Single pulse
SOT-323/SOD-323
Epoxy printed board FR4
Copper surface = 2.25 mm2
Coppr thickness = 35 µm
1.E-01
1.E-01
1.E-02
Alumine substrate
10 x 8 x 0.5 mm
1.E-02
1.E-03
tP(s)
tP(s)
1.E-02
1.E-01
1.E+00
1.E+01
1.E+02
1.E-03
1.E-03
DocID12564 Rev 4
1.E-02
1.E-01
1.E+00
1.E+01
1.E+02
1.E+03
3/14
14
Characteristics
BAT30
Figure 5. Relative variation of thermal
impedance junction to ambient versus pulse
duration
Figure 6. Relative variation of thermal
impedance junction to ambient versus pulse
duration
Zth(j-a) /Rth(j-a)
Zth(j-a) /Rth(j-a)
1.E+00
1.E+00
Single pulse
SOT-666
Single pulse
SOD-923
Epoxy printed board FR4
Coppr thickness = 35 µm
1.E-01
1.E-01
tP(s)
tP(s)
1.E-02
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
Figure 7. Relative variation of thermal
impedance junction to ambient versus pulse
duration
1.E-02
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
1.E+02
1.E+03
Figure 8. Thermal resistance junction to
ambient versus copper surface under each lead
(SOD-923)
Zth(j-a) /Rth(j-a)
Rth(j-a) (°C/W)
1.E+00
900
Single pulse
SOD-523
Epoxy printed board FR4
Copper thichness = 35 µm
800
Epoxy printed board FR4
Coppr thickness = 35 µm
700
1.E-01
600
500
400
300
1.E-02
200
100
tP(s)
SCU(cm²)
0
1.E-03
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
Figure 9. Thermal resistance junction to
ambient versus copper surface under each lead
(SOD-323)
Rth(j-a) (°C/W)
0.0
Epoxy printed board FR4
Copper thichness = 35 µm
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Figure 10. Leakage current versus reverse
applied voltage (typical values)
1.E+04
600
0.2
IR (µA)
Tj=150°C
1.E+03
Tj=125°C
500
1.E+02
Tj=85°C
1.E+01
400
1.E+00
Tj=25°C
300
1.E-01
200
1.E-02
0
4/14
VR (V)
SCU(mm²)
5
10
15
20
25
30
35
40
45
50
DocID12564 Rev 4
0
5
10
15
20
25
30
BAT30
Characteristics
Figure 11. Relative variation of reverse leakage Figure 12. Junction capacitance versus reverse
current versus junction temperature (typical
applied voltage (typical values)
values)
IR[T j] / IR[T j=25°C]
C(pF)
1.E+04
100
VR=30 V
F=1 MHz
VOSC=30 mVRMS
Tj=25 °C
1.E+03
1.E+02
1.E+01
10
1.E+00
1.E-01
Tj(°C)
VR(V)
1
1.E-02
-40
-20
0
20
40
60
80
100
120
140
160
1
10
100
Figure 13. Forward voltage drop versus forward Figure 14. Forward voltage drop versus forward
current (typical values)
current (typical values)
1.E+01
IFM(A)
IFM(A)
1.E+01
1.E+00
1.E-01
1.E+00
Tj=150 °C
1.E-01
Tj=125 °C
Tj=25 °C
Tj=85 °C
1.E-02
1.E-02
Tj=-40 °C
1.E-03
1.E-03
VFM(V)
VFM(V)
1.E-04
0.0
1.E-04
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
0.0
DocID12564 Rev 4
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
5/14
14
Ordering information scheme
2
BAT30
Ordering information scheme
Figure 15. Ordering information scheme
BAT30
Signal Schottky diodes
VRRM = 30 V
Configuration
Blank = Single diode
A = Common anode
C = Common cathode
S = Series diodes
07 = Parallel diodes
09 = Opposite diodes
Package
Blank = SOT-23
J = SOD-323
K = SOD-523
L = SOD-923
P6 = SOT-666
W = SOT-323
Packing
FILM = Tape and reel
6/14
DocID12564 Rev 4
xx
xx
FILM
BAT30
3
Package information
Package information
•
Epoxy meets UL94, V0
•
Lead-free packages
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 6. SOD-323 dimensions
Dimensions
Ref.
H
Millimeters
Inches
A1
Min.
Max.
Min.
Max.
A
-
1.17
-
0.046
A1
0
0.1
0
0.004
b
0.25
0.44
0.01
0.017
c
0.1
0.25
0.004
0.01
D
1.52
1.8
0.06
0.071
E
1.11
1.45
0.044
0.057
H
2.3
2.7
0.09
0.106
L
0.1
0.46
0.004
0.02
Q1
0.1
0.41
0.004
0.016
b
E
A
D
c
Q1
L
Figure 16. SOD-323 footprint (dimensions in mm)
3.20
0.30
1.06
1.08
DocID12564 Rev 4
1.06
7/14
14
Package information
BAT30
Table 7. SOD-523 dimensions
Dimensions
E
Ref.
0.15 M C A B
E1
B
D
2xb
0.20 M C A B
A
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
0.50
0.60
0.70
0.020
0.024
0.028
E
1.50
1.60
1.70
0.059
0.063
0.067
E1
1.10
1.20
1.30
0.043
0.047
0.051
D
0.70
0.80
0.90
0.028
0.031
0.035
b
0.25
-
0.35
0.010
-
0.014
c
0.07
-
0.20
0.003
-
0.008
L
0.15
0.20
0.25
0.006
0.008
0.010
L1
0.05
-
0.20
0.002
-
0.008
8°
R0.1
A
c
SEATING PLANE
C
7°
L
L1
Figure 17. SOD-523 footprint (dimensions in mm)
0.7
0.3
2
8/14
DocID12564 Rev 4
BAT30
Package information
Table 8. SOD-923 dimensions
Dimensions
L
Ref.
Millimeters
Min.
Typ.
A
C
A
b
Max.
Inches
Min.
Typ.
0.40
Max.
0.016
b
0.25
0.30
0.35
0.010
0.012
0.014
c
0.08
0.145
0.21
0.003
0.006
0.008
D
0.55
0.60
0.65
0.022
0.024
0.026
E
0.95
1.00
1.05
0.037
0.039
0.041
E1
0.75
0.825
0.90
0.030
0.032
0.035
L
-
-
0.20
-
-
0.008
D
E1
E
Figure 18. SOD-923 footprint (dimensions in mm)
0.37
0.34
0.58
1.32
DocID12564 Rev 4
9/14
14
Package information
BAT30
Table 9. SOT-23 dimensions
Dimensions
Ref.
Millimeters
A
Inches
Min.
Max.
Min.
Max.
A
0.89
1.4
0.035
0.055
A1
0
0.1
0
0.004
B
0.3
0.51
0.012
0.02
c
0.085
0.18
0.003
0.007
D
2.75
3.04
0.108
0.12
e
0.85
1.05
0.033
0.041
e1
1.7
2.1
0.067
0.083
E
1.2
1.6
0.047
0.063
H
2.1
2.75
0.083
0.108
E
e
B
D
e1
S
A1
L
c
H
L
0.6 typ.
S
0.35
0.65
Figure 19. SOT-23 footprint (dimensions in mm)
0.95
0.61
1.26
0.73
10/14
3.25
DocID12564 Rev 4
0.024 typ.
0.014
0.026
BAT30
Package information
Table 10. SOT-323 dimensions
Dimensions
Ref.
A
E
e
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
0.8
-
1.1
0.031
-
0.043
A1
0.0
-
0.1
0.0
-
0.004
b
0.25
-
0.4
0.010
-
0.016
c
0.1
-
0.26
0.004
-
0.010
D
1.8
2.0
2.2
0.071
0.079
0.086
E
1.15
1.25
1.35
0.045
0.049
0.053
e
-
0.65
-
-
0.026
-
H
1.8
2.1
2.4
0.071
0.083
0.094
L
0.1
0.2
0.3
0.004
0.008
0.012
q
0
-
30°
0
-
30°
D
b
A1
c
θ
L
H
Figure 20. SOT-323 footprint (dimensions in mm)
0.95
1.0
0.8
DocID12564 Rev 4
2.9
0.50
11/14
14
Package information
BAT30
Table 11. SOT-666 dimensions
Dimensions
b1
Ref.
Millimeters
Inches
L1
L3
Min.
Typ.
A
0.45
-
A3
0.08
b
Max.
Min.
Typ.
Max.
0.60 0.018
-
0.024
-
0.18 0.003
-
0.007
0.17
-
0.34 0.007
-
0.013
b1
0.19
0.27
D
1.50
-
1.70 0.059
-
0.067
E
1.50
-
1.70 0.059
-
0.067
E1
1.10
-
1.30 0.043
-
0.051
e
-
0.50
-
-
0.020
-
L1
-
0.19
-
-
0.007
-
L2
0.10
L3
-
b
D
E1
0.34 0.007 0.011 0.013
A
L2
E
A3
0.30 0.004
0.012
e
0.10
-
Figure 21. SOT-666 footprint (dimensions in mm)
0.50
0.62
0.99
0.30
12/14
DocID12564 Rev 4
2.60
-
0.004
-
BAT30
4
Ordering information
Ordering information
Table 12. Ordering information
5
Order code
Marking
Package
Weight
Base qty
Packing mode
BAT30-07P6FILM
P3
SOT-666 Parallel
2.9 mg
5000
Tape and reel
BAT30-09P6FILM
Q3
SOT-666 Opposite
2.9 mg
5000
Tape and reel
BAT30AFILM
A30
SOT-23
Common anode
10 mg
3000
Tape and reel
BAT30AWFILM
A30
SOT-323
Common anode
6 mg
3000
Tape and reel
BAT30CFILM
C30
SOT-23
Common cathode
10 mg
3000
Tape and reel
BAT30CWFILM
C30
SOT-323
Common cathode
6 mg
3000
Tape and reel
BAT30FILM
B30
SOT-23 Single
10 mg
3000
Tape and reel
BAT30JFILM
30
SOD-323 Single
5 mg
3000
Tape and reel
BAT30KFILM
30
SOD-523 Single
1.4 mg
3000
Tape and reel
BAT30LFILM
31
SOD-923 Single
0.56 mg
10000
Tape and reel
BAT30SFILM
S30
SOT-23 Serial
10 mg
3000
Tape and reel
BAT30SWFILM
S30
SOT-323 Serial
6 mg
3000
Tape and reel
BAT30WFILM
B30
SOT-323 Single
6 mg
3000
Tape and reel
Revision history
Table 13. Document revision history
Date
Revision
Changes
24-Jul-2006
1
First issue
08-Jul-2009
2
Added SOD-923 package. Table 12 sorted on alphabetic sequence
of order code. Updated ECOPACK statement.
13-Oct-2009
3
Updated Table 7 quote “L1” from 0.10 to 0.05.
01-Apr-2014
4
Added Pin 1 anode marker to SOT-666 package graphics. Updated
Table 2: Absolute ratings (limiting values at Tj = 25° C, unless
otherwise specified).
DocID12564 Rev 4
13/14
14
BAT30
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
14/14
DocID12564 Rev 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement