Sceptre Technologies X22 Computer Monitor User Manual 44 Pages
Sceptre X22 is a high-definition LCD monitor with a sleek design and advanced features that provide an immersive viewing experience. With its 22-inch screen and 1920 x 1080 resolution, the X22 delivers stunning visuals and sharp details. It features multiple connectivity options, including HDMI, DVI, and VGA, making it compatible with various devices such as computers, gaming consoles, and DVD players. The X22 also boasts a built-in speaker system for an enhanced audio experience.
advertisement
Dear Sceptre Customer,
Congratulations on your new SCEPTRE X22 LCD monitor purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your LCD monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE X22 LCD monitor.
For technical assistance, please call 1800-788-2878 and select option 3 or email our tech support group at [email protected]
.
For all other inquiries, please call 1800-788-2878 and select option 4 or email our customer service group at [email protected]
.
We recommend you register your SCEPTRE X22 LCD monitor with the enclosed registration card and mail it in. For peace of mind and to protect your investment beyond the standard warranty, SCEPTRE offers a two year extended warranty service for your LCD monitor. This plan gives additional coverage once your standard warranty period runs out.
Please call our customer service group to purchase the extended warranty.
SCEPTRE X22 Page1
Important Information
Page2 SCEPTRE X22
Tips and Safety Precautions
THIS PRODUCT HAS BEEN TESTED FOR COMPLIANCE WITH
REGULATORY SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
•
To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the X22 LCD MONITOR.
•
Unplug the power cord before cleaning the X22 LCD MONITOR. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
•
Always use the accessories recommended by the manufacturer to insure compatibility.
•
When moving the X22 LCD MONITOR from an area of low temperature to an area of high temperature, condensation may form on the housing.
Do not turn on the X22 LCD MONITOR immediately after this to avoid causing fire, electric shock or component damage.
•
Do not place the X22 LCD MONITOR on an unstable cart, stand, or table.
If the X22 LCD MONITOR falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the X22 LCD MONITOR.
•
Any heat source should maintain a distance of at least 5 feet away from the X22 LCD MONITOR, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture.
Operating the product close to smoke or moisture may cause fire or electric shock.
•
Slots and openings in the back and bottom of the bezel are provided for ventilation. To ensure reliable operation of the X22 LCD MONITOR and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the X22 LCD MONITOR in a bookcase or cabinet unless proper ventilation is provided.
•
It is not recommended to use the X22 LCD MONITOR in a portrait format
(by rotating 90 degrees) under high temperature environment (25°C or higher), since this would retard heat dissipation and would eventually damage the monitor.
•
Never push any object into the ventilation slots of the X22 LCD
MONITOR. Do not place any objects on the top of the Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the X22 LCD MONITOR.
•
The X22 LCD MONITOR should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
•
The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.
SCEPTRE X22 Page3
•
The X22 LCD MONITOR is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
•
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•
The wall socket should be installed near the equipment and should be easily accessible.
•
Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.
•
Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.
•
Unplug the unit during a lightning storm or when it will not be used for a long period of time. This will protect the X22 LCD MONITOR from damage due to power surges.
•
Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
•
Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
•
Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.
•
Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.
•
Do not install the product in an area with heavy dust or high humidity.
Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
•
Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shocks. When the product will not be used for an extended period of time, unplug the power connector.
•
To avoid risk of electric shock, do not touch the connector with wet hands.
•
Insert batteries in accordance with instructions while using the remote control. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote control.
•
If any of the following occurs please contact the dealer: o
The power connector fails or frays. o o o o
Liquid sprays or any object drops into the X22 LCD MONITOR.
The Display is exposed to rain or other moisture.
The Display is dropped or damaged in any way.
The performance of the Display changes substantially.
•
Operating environment: Temperature: 5°C ~ 35°C, Humidity: 10% to 90% non-condensing, Altitude: 0~10,000 ft.
Page4 SCEPTRE X22
Table of Contents
Important Information………………………………………………………………. 2
Tips and Safety Precautions……………………………………………………… .3
Table of Content……………………………………………………………………..5
Opening the Package……………………………………………………………… 6
Package Contents………………………………………………………………..... 6
Optional Accessories………………………………………………………………. 6
Installing the Base………………………………………………………………….. 7
QUICK START……………………………………………………………………… 8
Mounting Preparations…………………………………………………………….. 9
Identifying Front and Rear Panel…………………………………………………11
Front View………………………………………………………………….. 11
Side View Control Buttons……………………………………………….. 12
Side View Tilt Angle………………………………………………………. 13
Rear View………………………………………………………………….. 14
Rear View Connections…………………………………………………... 15
Understanding Your Cables & Connections……………………………. 16
Connecting the LCD to Your PC…………………………….…………………... 17
If You Have DVI Connection on Your Video Card……………………... 17
If You Have VGA Connection on Your Video Card…………………….. 18
Connecting the LCD to Your Video Device…………………………………….. 19
If You Have HDMI Connection on Your DVD Player…………………...19
If You Have HDMI Connection on Your HD Box………………………. 20
If You Have HDMI Connection on PlayStation® 3…………………….. 21
If You Have VGA Connection on Xbox 360™………………………….. 22
On Screen Display (OSD) Menu………………………………………………… 23
AUTO ADJUST……………………………………………………………. 23
LUMINANCE………………………………………………………………. 24
GEOMETRY………………………………………………………………. 25
COLOR…………………………………………………………………….. 27
VOLUME…………………………………………………………………… 28
OSD………………………………………………………………………… 29
LANGUAGE……………………………………………………………….. 29
RECALL……………………………………………………………………. 30
MISCELLANEOUS……………………………………………………….. 31
EXIT………………………………………………………………………… 32
Supported PC Resolution…………………………………………………………32
Supported Video Resolution…………………………………………………….. 33
Troubleshooting…………………………………………………………………… 34
How do I clean the LCD?............................................................................... 37
Specification……………………………………………………………………….. 38
Call Us If You Need Help!............................................................................... 40
LIMITED PRODUCT WARRANTY……………………………………………… 41
Disclaimer & Copyright Information……………………………………………...43
FCC Compliance Statement……………………………………………………... 44
SCEPTRE X22 Page5
Opening the Package
The SCEPTRE X22 is packaged in a carton together with standard accessories. The weight of the LCD display is approximately 15.2 lbs. Since the LCD panel can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on a protective padding. When opening the carton, make sure the product is in good condition and that all the standard accessories and items are included. After unpacking your LCD monitor, be sure to save the original box and all packing materials for future shipping needs.
Package Contents
Monitor Display x 1
User Manual x 1
Warranty Card x 1
Power Cord x 1
VGA Cable x 1
3.5 mm Jack Audio Cable x 1 (for Line In to PC)
Optional Accessories
DVI Cable
HDMI – DVI Video Conversion Cable
Female RCA Audio – 3.5mm Mini-jack Conversion Cable
You can order the optional accessories from Sceptre Inc. directly. Please contact Sceptre customer service for further instructions.
Page6 SCEPTRE X22
Installing the Base
1. Please place the base on a flat surface (i.e. table).
2. Hold the monitor directly 90 degrees above the base.
SCEPTRE X22 Page7
3. Connect the monitor to the base by inserting the monitor into the base.
QUICK START
The following are short steps to connect and use the monitor with your PC under Microsoft Windows.
1. After you have installed the base, connect your VGA cord to both the monitor and PC and turn on the PC and the monitor.
2. While booting up keep pressing F8 and choose the VGA mode option.
3. Under Windows, use your mouse to right click on the background with nothing selected. Left click on the PROPERTIES option.
4. Click on the SETTINGS tab.
5. Under SETTINGS change your resolution to 1680 x 1050 and click on
APPLY.
6. Click on ADVANCED button, and then click on MONITOR tab.
7. Under MONITOR make sure your refresh rate is set to 60 Hz.
8. Click on OK on all windows to exit.
9. On the monitor, press the MENU button to bring up the OSD.
+ and
–
buttons to navigate to Auto Adjust. Press the MENU button to use Auto Adjust.
11. Reboot your computer and when Windows finishes loading; your monitor is ready for use.
Page8 SCEPTRE X22
Mounting Preparations
1. Place the monitor on a flat surface with cloth so the bezel does not get scratched.
2. Please remove the label sticker that covers the screws you need to remove.
SCEPTRE X22 Page9
3. Unscrew the 4 screws that lock the arm to the monitor.
4. Once the 4 screws are removed, the stand will come off and the monitor will be ready for mounting.
Page10 SCEPTRE X22
Identifying Front and Rear Panel
Front View
POWER INDICATOR : If light is blue, the monitor is turned on.
If the light is blinking blue, the monitor is turned on but not receiving a signal from the computer.
NATIVE RESOLUTION : This monitor’s clearest picture is produced under its native resolution. The native resolution of the monitor is 1680 x 1050 at 60 Hz refresh rate.
SCEPTRE X22 Page11
Side View Control Buttons
POWER – This button turns the monitor ON or OFF.
ADJUST + / SCROLL UP
–
While in the OSD this button acts as a navigation button moving your selection to the next one. If you entered the function this button acts as the increase adjustment button. With the OSD off, this buttons functions
as the hotkey for adjusting BRIGHTNESS. Use the ▲ and
▼ key to adjust the actual value.
MENU / ENTER – This button opens the On Screen Display
(OSD) Menu. While in the OSD, this button also acts as the
ENTER button and goes into the function you want to adjust.
While adjusting the actual value of options, press this button again to exit.
ADJUST – / SCROLL DOWN
–
While in the OSD this button acts as a navigation button moving your selection to the previous one. If you entered the function this button acts as the decrease adjustment button. With the OSD off, this buttons
functions as the hotkey for adjusting VOLUME. Use the ▲
and ▼ key to adjust the actual value.
SOURCE
–
This button allows you choose the source of the monitor between VGA and DVI.
Page12 SCEPTRE X22
Side View Tilt Angle
The LCD Monitor’s angle settings range from 0
° to 12°.
SCEPTRE X22 Page13
Rear View
Mounting Specification : 100mm x 100mm using screw size
M4. Length of screw should not exceed 10mm.
Page14 SCEPTRE X22
Rear View Connections
The following descriptions are from left to right.
Audio Line In – This connection is for linking to the PC’s line out connection for transmitting audio signal to the monitor’s speakers. Do NOT connect a headset or external speakers to this connection. You can also use this connection for
audio on game consoles or HD video devices by using a
3.5mm Mini-jack to Female RCA (red / white) audio conversion cable in conjunction with a regular RCA (red /
white) audio cable.
AC Power – This connection is for providing power to the monitor.
DVI – DVI stands for Digital Video Interface. This connection is for computers to send video signals to the monitor digitally so that colors and video are more accurate and vivid. This port
supports video input; the DVI connection support HDCP. If you have a HDCP or HDMI video device, you can use a conversion cable to connect to this port.
VGA – VGA stands for Video Graphics Array. This connection is for computers to send video signals to the monitor by an analog signal. This method of connection is the most commonly used connection. This port does not support
video input.
SCEPTRE X22 Page15
Understanding Your Cables & Connections
Cable
Name
DVI
(digital video)
Cable Picture
Corresponding
Connection Picture
VGA
(analog video)
3.5 mm
Mini-jack
Power Cord
Conversion
Cable Name
HDMI to DVI
(optional
accessory)
Conversion Cable Picture
3.5mm Mini-jack to Female RCA
Audio (optional
accessory)
Page16 SCEPTRE X22
Connecting the LCD to Your PC
If You Have DVI Connection on Your Video Card…
1. Make sure the power of X22 LCD MONITOR is turned off.
2. Obtain a DVI cable and connect to the DVI connection on your
PC. Connect the other end of the cable to your X22 LCD
MONITOR.
3. Obtain the Audio In cable and connect the 3.5 mm Mini-jack cable to the Audio In connection of the monitor. Connect the other end of the 3.5 mm Mini-jack cable to your PC’s audio line out connection.
4. Turn on the power of both the X22 LCD MONITOR and the PC.
Please Note :
•
Some video cards may have their DVI connection turned off by default. If you do not get video, please consult your video card’s technical support.
•
The PC’s clearest picture is produced under 1680x1050 at 60Hz.
SCEPTRE X22 Page17
If You Have VGA Connection on Your Video Card…
1. Make sure the power of X22 LCD MONITOR is turned off.
2. If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the X22 LCD MONITOR.
You can find the refresh rate information and change it by
RIGHT CLICKING on the desktop with nothing selected. After you have right clicked, select the PROPERTIES option. Click on the SETTINGS tab. Click on the ADVANCED button. Click on the MONITOR tab. In that tab, change the refresh rate to
60Hz and click on APPLY. After the refresh rate changed, please shut down the computer and monitor.
3. Obtain the VGA cable and connect to the VGA connection on your PC. Connect the other end of the cable to your X22 LCD
MONITOR.
4. Obtain the Audio In cable and connect the 3.5 mm Mini-jack cable to the Audio In connection of the monitor. Connect the other end of the 3.5 mm Mini-jack cable to your PC’s audio line out connection.
5. Turn on the power of both the X22 LCD MONITOR and the PC.
Please Note :
•
The PC’s clearest picture is produced under 1680x1050 at 60Hz.
Page18 SCEPTRE X22
Connecting the LCD to Your Video
Device
If You Have HDMI Connection on Your DVD Player…
1. Make sure the power of X22 LCD MONITOR is turned off.
2. If you have HDMI connection on your DVD player, purchase a HDMI to DVI video conversion cable and connect the HDMI end to the DVD player. Connect the DVI end to the X22 LCD monitor. Make sure to match the shapes on both connections.
3. Purchase a 3.5 mm mini-jack to female RCA audio conversion cable and connect the RCA red / white end to regular RCA red
/ white cables and regular RCA red / white cables to your DVD player. Connect the 3.5 mm Mini-jack end to the X22 LCD
MONITOR’s Audio In connection.
4. Turn on the X22 LCD MONITOR and your video device.
Please Note :
•
Please reference your DVD player manual or call the
DVD player’s tech support to make sure the proper settings are configured for your DVD player.
•
If you have a DVI out on your DVD player you can use a DVI cable to get video.
SCEPTRE X22 Page19
If You Have HDMI Connection on Your HD Box…
1. Make sure the power of X22 LCD MONITOR is turned off.
2.
If you have HDMI connection on your HD set-top box,
purchase a HDMI to DVI video conversion cable and connect the HDMI end to the HD set-top box. Connect the DVI end to the X22 LCD monitor. Make sure you match the shapes on both connections.
3. Purchase a 3.5 mm mini-jack to female RCA audio conversion cable and connect the RCA red / white end to regular RCA red
/ white cables and regular RCA red / white cables to your HD set-top box. Connect the 3.5 mm Mini-jack end to the X22 LCD
MONITOR’s Audio In connection.
4. Turn on the X22 LCD MONITOR and your video device.
Please Note :
•
Please reference your set-top box manual to make sure the proper settings are configured for your video device.
•
If you have a DVI out on your HD box, you can use a DVI cable to get video.
Page20 SCEPTRE X22
If You Have HDMI Connection on PlayStation® 3…
1. Make sure the power of X22 LCD MONITOR is turned off.
2.
If you have HDMI connection on your PlayStation® 3,
purchase a HDMI to DVI video conversion cable and connect the HDMI end to your PlayStation® 3 and connect the DVI end to the X22 LCD monitor.
3. Purchase a 3.5 mm mini-jack to female RCA audio conversion cable and connect the RCA red / white end to the PlayStation®
3’s AV cable’s audio RCA red / white heads. Connect the 3.5 mm Mini-jack end to the X22 LCD MONITOR’s Audio In connection. Connect the PlayStation® 3’s AV cable’s dongle to the PlayStation® 3.
4. Turn on the X22 LCD MONITOR and your PlayStation® 3.
Please Note :
•
Please reference your PlayStation® 3’s manual to make sure the proper settings are configured for your video device.
SCEPTRE X22 Page21
If You Have VGA Connection on Xbox 360™…
1. Make sure the power of X22 LCD MONITOR is turned off.
2. If you have VGA connection on your Xbox 360™, purchase an Xbox 360™ VGA video cable and connect the proprietary single head to your Xbox 360™. Connect the VGA end to the
X22 LCD monitor. Make sure you match the shapes on all connections.
3. Purchase a 3.5 mm mini-jack to female RCA audio conversion cable and connect the RCA red / white end to the Xbox 360™
VGA cable’s audio RCA red / white heads. Connect the 3.5 mm
Mini-jack end to the X22 LCD MONITOR’s Audio In connection.
4. Turn on the X22 LCD MONITOR and your Xbox 360™.
5. Press MENU on the X22 and use the Auto Adjust function.
Please Note :
•
Please reference your Xbox 360™’s manual to make sure the proper settings are configured for your video device.
Page22 SCEPTRE X22
On Screen Display (OSD) Menu
The OSD menu of the monitor provides various adjustments for the monitor such as color, brightness, contrast, screen settings…..etc.
When you press the MENU button on the side of the monitor, the OSD screen will appear. Select each of the functions with the
(▲/+)
or
(▼/–)
buttons. Use the MENU button to enter each of the function or when you’re in the function already, use the MENU button to select the option you want to adjust. Use the
(▲/+)
or
(▼/–)
buttons to adjust each option’s values.
AUTO ADJUST
This function auto adjusts the clock and phase of the monitor when using VGA cable so the monitor will sync better with the video card and produce a clearer picture.
1. You can use this function by pressing MENU, then press
(▲/+)
or
(▼/–)
to select Auto Adjust
.
2. Once Auto Adjust is highlighted, press MENU again to use the function.
SCEPTRE X22 Page23
Please Note :
• This function is only available under VGA.
LUMINANCE
This function adjusts the brightness and contrast of the LCD.
1. To use this function, press MENU to open the OSD then highlight LUMINANCE function by pressing the
(▲/+)
or
(▼/–)
button.
2. Press MENU to enter the function.
(▲/+)
or
(▼/–)
button to select BRIGHTNESS or CONTRAST to adjust.
4. Press MENU to select the option you want to adjust.
(▲/+)
or
(▼/–)
button to adjust the values.
Please Note :
• BRIGHTNESS adjusts the black level in a picture. If the value is adjusted too high, the picture will look washed out. If too low, the picture will not have much detail in dark colors.
• CONTRAST adjusts the white levels in a picture. If the value is adjusted too high, the picture will not have any details in bright parts of the picture. If set too low, the picture will looked washed out.
Page24 SCEPTRE X22
GEOMETRY
This function adjusts the screen’s image quality manually.
1. Press MENU to open the OSD then highlight
GEOMETRY by pressing the buttons.
2. Press MENU to enter the function.
(▲/+)
or
(▼/–)
(▲/+)
or
(▼/–)
buttons to select the option you want to adjust. Use MENU to enter the option and
(▲/+)
or
(▼/–)
buttons to adjust the values. a. H-POSITION – This option moves the picture left or right. b. V-POSITION – This option moves the picture up or down. c. PIXELCLOCK – This option adjusts the video signal in a large increment to sync with the
PC. d. PHASE – This option adjusts the video signal e. in a small increment to sync with the PC.
FORMAT – This option adjusts the compatibility of the LCD to a specific resolution under VGA. When using VGA
connection, you need to use this option for
changing the resolutions below then use
AUTO ADJUST after changing the format option.
SCEPTRE X22 Page25
i. AUTO – This format sets the monitor for any resolution besides the three resolutions below it. ii. 1024x768 – This format sets the monitor for 1024x768 resolution, making the screen clearer. iii. 1280x768 – This format sets the monitor for 1280x768 resolution, making the screen clearer. iv. 1360x768 – This format sets the monitor for 1360x768 resolution, making the screen clearer.
Please Note :
• It is always suggested for the USER to use the AUTO ADJUST function instead of manual adjustments.
• Make sure you AUTO ADJUST after changing the resolution and the format.
• LCDs will always be a little blurry when they’re not in their native resolution. Make sure you are in the native resolution of the monitor first before making screen setting adjustments.
• This LCD’s native resolution is 1680x1050 at
60 Hz.
• SCREEN SETTING adjustments are only available under VGA.
Page26 SCEPTRE X22
COLOR
This function adjusts the overall balance of white colors in a picture in large increments. Color temperature consists of
5800K, 6500K, and 9300K.
1. Press MENU to open the OSD then highlight COLOR by pressing the
(▲/+)
or
(▼/–)
buttons.
2. Press MENU to enter the function.
(▲/+)
or
(▼/–)
button to select the option you want to adjust to. Use MENU to select the option. a. 9300K – This option adjusts the white balance towards the blue color giving the picture a bluish tint and cooler look. b. 6500K – This option adjusts the white balance to give the picture a no biased white color. c. 5800K – This option adjusts the white balance towards the red color giving the picture a reddish tint and warmer look. d. USER PRESET – This option lets the user adjust the white balance by tweaking the RED,
GREEN, and BLUE color. e. AUTO COLOR – This option adjusts the overall balance of white colors in a picture automatically. i. To use this option with hotkeys, press both
(▲/+)
and MENU together and
SCEPTRE X22 Page27
the function will automatically adjust the white balance for you.
(▲/+)
or
(▼/–)
buttons to select the color you want to adjust and press MENU to select it.
(▲/+)
or
(▼/–)
button to adjust the values.
VOLUME
This function changes the X22 LCD MONITOR’s speaker volume.
1. Press MENU to open the OSD then highlight OSD
SETTING by pressing the
(▲/+)
or
(▼/–)
buttons.
2. Press MENU to enter the function.
(▲/+)
or
(▼/–)
buttons to adjust the option.
Page28 SCEPTRE X22
OSD
This function adjusts the OSD’s display options.
1. Press MENU to open the OSD then highlight OSD by pressing the
(▲/+)
or
(▼/–)
buttons.
2. Press MENU to enter the function.
(▲/+)
or
(▼/–)
buttons to select the option you want to adjust and press MENU to enter the option.
(▲/+)
or
(▼/–)
buttons to adjust the values. a. H-POSITION – This option moves the OSD menu left or right. b. V-POSITION – This option moves the OSD menu up or down. c. OSD TIME – This option change the time which the OSD will remain on screen while idle.
LANGUAGE
This function allows you to change the language of the OSD.
SCEPTRE X22 Page29
1. Press MENU to open the OSD then highlight
LANGUAGE by pressing the
(▲/+)
or
(▼/–)
buttons.
2. Press MENU to enter the function.
(▲/+)
or
(▼/–)
buttons to select the language you want to change to and press MENU to finalize the change.
Please Note :
• Changing the language of the OSD will alter all the messages and OSD language of the monitor. There is no reset for this function.
RECALL
This function recalls adjustments to the monitor.
1. Press MENU to open the OSD then highlight RECALL by pressing the
(▲/+)
or
(▼/–)
buttons.
2. Press MENU to enter the function.
(▲/+)
or
(▼/–)
buttons to select the option you want to recall.
4. Press MENU to enter the option and with the
(▲/+)
or
(▼/–)
buttons select Yes to recall. a. COLOR RECALL – recalls all settings of
COLOR function. b. RECALL ALL – recalls all settings besides
COLOR function.
Page30 SCEPTRE X22
MISCELLANEOUS
This function adjusts many loose options inside the monitor.
1. Press MENU to open the OSD then highlight
MISCELLANEOUS by pressing with the
(▲/+)
or
(▼/–)
buttons.
2. Press MENU to enter the function.
3. Press with the
(▲/+)
or
(▼/–)
buttons to select the option you want to adjust and press MENU to adjust the function.
(▲/+)
or
(▼/–)
buttons to adjust the value of the option. i. SHARPNESS – This option adjusts the sharpness of the graphics and text. ii. INPUT SELECT – This option lets you select the input you want. iii. OVER DRIVE – This option helps increase pixel response time reducing ghosting effects. iv. DCR – This option turns dynamic contrast on or off. v. DISPLAY INFORMATION – This option shows the monitor’s information such as resolution and refresh rate.
SCEPTRE X22 Page31
Please Note :
• You can switch sources easily by using the
SOUCE button on the side of the monitor.
EXIT
This function exits the OSD menu.
1. Select the EXIT function with the
(▲/+)
or
(▼/–)
buttons and press MENU to exit.
Supported PC Resolution
STD
MAC 13" mode
MAC 17" mode
MAC 18" mode
RES
Dot
Clock
(MHz)
Vertical
Scanning
Frequency
(Hz)
Horizontal
Scanning
Frequency
(kHz)
640x480 30.24 66.67 35.00
1024x768 80 74.93 60.24
1152x870 100 75.06 68.68
VESA 640x480 37.50
SVGA 800x600 40 60.32 37.88
VESA 800x600 50 72.19 48.08
VESA 800x600 49.5 75 46.88
XGA 1024x768
VESA 1024x768
65 60 48.36
75 70.07 56.48
VESA 1024x768 78.75 75.03 60.02
Page32 SCEPTRE X22
VESA 1152x764 108 75 68.7
VESA 1280x1024 108 60 63.98
IBM 1280x1024 128 71.53 75.83
VESA 1280x1024 135 75 80
VESA 1360x768 84.75 59.8 47.72
WSXGA 1440x900 88.75 60
WSXGA 1440x900 106.5 60
VESA 1680x1050
55.5
59.9
119 59.883 64.7
VESA 1680x1050 146.25
59.954 65.29
VESA 1920x1080 173 60 67.158
*Once a mode is optimized, there is no need to make any further adjustment as long as the VGA card remains unchanged. **Specifications are subject to change without notice.
Supported Video Resolution
Item Standards
Vertical
Scanning
Frequency
(Hz)
Horizontal
Scanning
Frequency
(kHz)
1 720x480i 29.97 15.73
2 720x480P 59.94 31.46
3 1280x720P 60 45
4 1920x1080i
5 1920x1080P
30
60
33.75
67.5
SCEPTRE X22 Page33
Troubleshooting
Problem
DISPLAY IS
UNCLEAR AND
UNSTABLE
THERE IS NO
LCD DISPLAY or SCREEN
SAYS NO
VIDEO
MONITOR
SAYS “SIGNAL
OUT OF
RANGE”
Possible solutions
To stabilize and clarify your display, use the AUTO ADJUST function or change the resolution to the display’s optimal setting 1680 X 1050 at 60Hz, then AUTO
ADJUST.
Make sure you switched to the correct source. Check both sources to see video is on the other source. Check your video cable. It might be corrupt. Swap out the video cable for another one to see if the monitor will work. Check your power plug.
See if it is fully plugged in on both the monitor and the wall.
If you have a CRT monitor, please connect the CRT monitor to the computer and change the refresh rate down to
60Hz via your video card’s display settings menu. After the setting of 60Hz has been change you can then use the
LCD on the computer.
1. To change the setting go to display settings by right clicking on your desktop with nothing selected. Choose the
PROPERTIES option.
2. Click on the SETTINGS tab, then click on the ADVANCED button.
3. Click on the MONITOR tab and change the refresh rate to 60Hz.
4. Click on OK 2-3 times to finalize your change.
If you do NOT have a CRT monitor or it’s already broken, please make sure both the X22 monitor and your computer is turned off.
Page34 SCEPTRE X22
I CANNOT GET
THE
RESOLUTION
1680X1050
1. Turn on the LCD and the computer.
2. While the computer is turned on, press the “F8” key on your keyboard continuously until a selection menu appears and select the “Safe Mode” option.
3. When you’ve entered Safe Mode please uninstall any video card driver and monitor driver by using either the “Add / Remove
Programs” icon or going into
“System Properties” and manually removing anything under “Monitors” and “Display
Adapters”.
4. After removing all the drivers, please reboot your computer and you should be able to see windows. Please install your monitor driver first, then your video card driver. Please remember to make sure your refresh rate should be at 60Hz.
If you are using DVI, please try out VGA to see if you are able to achieve that resolution. If your VGA can then, your video card’s DVI cannot support widescreen resolutions.
Sometimes your video card will not read the monitor correctly and will not allow you to achieve the resolution you want.
Rebooting your computer will solve the situation.
You can also make sure your video card’s video drivers are up to date. You can find what video card you have by clicking on
START then RUN. Type in “DXDIAG”.
When the diagnostic window pops up, click on the DISPLAY tab. The program
SCEPTRE X22 Page35
I DO NOT HEAR
ANY SOUND
FROM THE
SPEAKERS
THE VIDEO IS
TOO BRIGHT
NO MATTER
WHAT I
ADJUST
THE WORDS
AND VIDEO
ARE TOO
BLURRY
THE COLORS
ARE NOT
CORRECT will tell you what video chipset you have.
Copy that name then search it with an online search engine like GOOGLE™.
Find your video card company’s web address and search for newer drivers. If updating your drivers does not work, you probably have one of the older video cards and cannot achieve a widescreen resolution. You’ll need to upgrade your video card to a newer one.
Check your 3.5 mm mini-jack cable and see if it is connected correctly between the computer and the monitor. Check the volume of your computer and also the volume of the monitor.
Sometimes having older video cards this type of problem might happen due to newer LCDs having to provide HD video capability and not being fully compatible with older video cards. You can try adjusting the video card’s options in the computer but ultimately you’ll need to upgrade your video card.
Are you using the monitor’s native resolution? If not you’ll need to switch resolution to the native 1680x1050 at 60
Hz to make the words clearer. If you’re using VGA please do not forget to AUTO
ADJUST and to use FORMAT under
OSD.
If the words are still blurry, please try enabling or disabling CLEAR TYPE function from windows.
Sometimes the colors are not correct because your VGA or DVI cable is loose or corrupt. Please try reconnecting your cable or swap out your current cable to see if the problem persists.
Page36 SCEPTRE X22
How do I clean the LCD?
IMPORTANT
1. The power cable has to be removed from the socket before cleaning the TV.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These types of chemicals might damage the housing and the
LCD glass.
Cleaning the bezel and remote control
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the remote control or bezel is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards.
Please Note :
• Make sure you wring the water out of the cloth before cleaning the bezel or remote in order to prevent water from penetrating into the electronics.
Cleaning the Screen
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with any material. Do not press or tap the screen to avoid cracking. When the screen is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again.
Wipe the display with a dry micro-fiber cloth or
100% cotton cloth afterwards.
SCEPTRE X22 Page37
Specification
Item
Active Area / Screen Size
Aspect Ratio
Display panel
Illustration
473.76 mm x 296.1 mm Display Area
(diagonal 22 inches)
Widescreen 16 : 10
Resolution
Brightness
Native: 1680 x 1050
300 nits (Typical)
Contrast
Response Time
Viewing Angle
Lamp Life of Backlight
Dimension
Weight
Power input
2000:1 (DCR)
2ms (Gray to Gray)
Typical 170/160 Degree
(Horizontal/Vertical)
> 50,000hrs
Monitor Display
22.7(L)X4.7(D)X19.7(H) inches
557(L)X115(D)X483(H) mm
11.46 lbs (5.2 Kgs)
100V to 240VAC @ 50/60 Hz Max,
50W
Features
(1)Audio
Speakers output
(2) General
2w + 2w
Page38 SCEPTRE X22
VIDEO DVI (HDCP)
PC timing
Features (continued)
480i @ 60 Hz
480p @ 60 Hz
720p @ 60 Hz
1080i @ 60 Hz
1080p @ 60 Hz
640 * 350 @ 70 Hz
640 * 400 @ 70 Hz
640 * 480 @ 60 , 66 , 70, 72, 75 Hz
800 * 600 @ 60 , 66, 70, 72, 75 Hz
1024 * 768 @ 60, 70, 75 Hz
1152 * 864 @ 75 Hz
1280 * 720 @ 60 Hz
1280 * 800 @ 60 Hz
1280 * 960 @ 60 Hz
1280 * 1024 @ 60, 70 ,75 Hz
1360 * 768 @ 60 Hz
1440 * 900 @ 60 Hz
1680 * 1050 @ 60 Hz
1920 * 1080P @ 60 Hz
VGA, DVI (HDCP)
(5)I/O
Audio Line In
*Specifications are subject to change without notice.
SCEPTRE X22 Page39
Call Us If You Need Help!
Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone or email. For more information on warranty services or repairs after the warranty period, please contact our support department at the number below.
For technical help, contact our Sceptre Technical Support
Group via email or phone. Please have your Sceptre p/n
number, serial number, and date of purchase available
before you call.
Tech Support E-mail : [email protected]
Customer Service Email : [email protected]
TEL : 1800-788-2878
Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM (PST)
16800 East Gale Ave.
City of Industry, CA 91745
TEL : 626-369-3698
FAX : 626-855-5711
Website :
www.SCEPTRE.com
Page40 SCEPTRE X22
LIMITED PRODUCT
WARRANTY
Please read this warranty card carefully, it is a “ONE-YEAR LIMITED
WARRANTY” on parts and labor and is only valid when purchased from an
Authorized Reseller, only on new and non-refurbished product, and available to customers in the Continental US, Alaska, Hawaii and Puerto Rico. See below for the SCEPTRE Extended Service warranty.
SCEPTRE’s Responsibility
SCEPTRE Displays purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one (1) year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the monitor using new or refurbished parts.
Service Labor
During a period of one (1) year from the effective warranty date, SCEPTRE will provide, when needed, service labor to repair a manufacturing defect at
Sceptre’s own Service Center. To obtain warranty service in the Untied States, you must first call our Customer Support at (800) 788-2878. The determination of service will be made by SCEPTRE Customer Support. PLEASE DO NOT
RETURN YOUR UNIT TO SCEPTRE WITHOUT PRIOR AUTHORIZATION.
Parts
New or remanufactured replacements for defective parts will be used for repairs by SCEPTRE at its designated Service Center for one (1) year from the effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty period.
Service
During the one (1) year warranty period, SCEPTRE will, at its option and sole discretion, repair or replace defective parts, including replacement of the entire
Panel. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs, you are responsible for all transportation charges to the service facility.
SCEPTRE is NOT responsible for the de-installation or re-installation of the unit.
Packaging and Shipping Instruction
When you send the product to an authorized SCEPTRE service facility you must use the original carton box and packing material or an equivalent as designated by SCEPTRE.
Not Covered
This warranty does not cover defects, malfunctions or failures resulting from shipping or transit accidents, abuse, misuse, operation contrary to furnished instructions, operation on incorrect power supplies, operation with faulty associated equipment, modification, alteration, improper servicing, tampering or normal wear and tear or TVs on which the serial number has been removed or defaced. Image Sticking caused by operating at excessive brightness levels for extended periods or mishandling are not covered by this warranty.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
SCEPTRE X22 Page41
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL
BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE.
OUR LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING
FROM ANY CAUSE WHATSOEVER, INCLUDING OUR NEGLIGENCE,
ALLEGED DAMAGE OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS
ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE DISPLAY. WE SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT
APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only warranty applicable; no one is authorized to extend or modify it or to grant any other warranty.
SCEPTRE retains the right to assess all warranty claims and to determine if damages are covered by the warranty. In case of a claim that is not covered by the warranty, you will be contacted to determine whether SCEPTRE should repair the damage for a fee or whether the product should be returned to you as received by the repair center.
Dead Pixel Policy
There are millions of pixels on a LCD screen. Therefore, there is industry standard specification regarding dead or bad pixels. SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, 5 dead pixels of the same brightness and color, or 8 total in a combination of color and brightness of dead pixels. Any number of dead or bad pixels under the limit is considered normal specification.
Owner’s Responsibility
Effective Warranty Date
Warranty begins on the date of sale to the end user. To ensure warranty service, keep the dated bill or sale receipt as evidence of the purchase date.
Warranty Service
For warranty service information, contact SCEPTRE Customer Support at
(800) 788-2878, 8:30 am to 5:30 pm PST or visit www.Sceptre.com. Parts and service labor that are SCEPTRE’s responsibility (see above) will be provided without charge. Other service is at the owner’s expense. You must provide the model, serial number and date of purchase. Before you ask for warranty service, read your User Manual. You might avoid a service call.
Warranty conditions are subject to change, for latest Warranty Terms and
Conditions and additional information regarding your warranty, please see complete details online at www.SCEPTRE.com
.
Sceptre Extended Warranty
Protect your investment beyond the standard warranty and experience piece of mind with SCEPTRE’s Extended Service Warranty.
Depending on your model, plans are offered for an additional 2 years. Visit www.SCEPTRE.com or call 1-800-788-2878 to purchase a plan today.
Page42 SCEPTRE X22
Disclaimer & Copyright Information
Microsoft, Windows are registered trademarks of Microsoft
Corporation in the United States and other countries.
Xbox 360™ is a registered trademark or trademark of
Microsoft Corporation in the United States and other countries.
PlayStation® 3 is a registered trademark or trademark of Sony
Computer Entertainment Inc. in the United States and other countries.
Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, Sceptre, Inc. reserves the right to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from Sceptre, Inc..
SCEPTRE is a trademark or registered trademark of Sceptre
Group.
SCEPTRE X22 Page43
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that my cause undesired operation.
Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Caution: To comply with the limits for an FCC Class B computing device,
always use the signal cord and power cord supplied with this
unit.
The Federal communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
European Notice
Products with the CE marking comply with both the EMC Directive
(89/336/EEC), (93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
Page44 SCEPTRE X22
advertisement