- No category
advertisement
Timing Modes
Delay on operate – Delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied.
INPUT
VOLTAGE
ON
OFF
N.O. RELAY
CONTACTS
ON
OFF
TIME
Delay on release – Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes.
When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by closing the control switch.
CONTROL
SWITCH
N.O. RELAY
CONTACTS
ON
OFF
ON
OFF
TIME
Interval on (without control switch) – The relay energizes and timing begins when input voltage is applied. At the end of the time delay period the relay will de-energize. Reset is accomplished by removing, then reapplying, the input voltage.
INPUT
VOLTAGE
ON
OFF
Catalog 1308242
Issued 3-03
CB
series
•
•
•
•
CMOS IC Time Delay Relay
Choice of timing modes
– Delay on operate
– Delay on release
– Interval on with or without control switch
Knob adjustable
10A output relay with SPDT or DPDT contacts
Various models time from 0.1 sec. to 100 min.
P&B
File E22575
File LR15734
Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application.
Contact Data @ 25
°
C
Arrangements: 2 Form C (DPDT), except 8-pin delay on release model has 1 Form C (SPDT).
Material: Silver-cadmium oxide alloy.
Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC;
1/3 HP @ 120VAC.
Expected Mechanical Life: 10 million operations.
Expected Electrical Life: 100,000 operations, min., at rated load.
Initial Dielectric Strength
Between Open Contacts: 500V rms, 60 Hz.
Between All Other Conductors: 500V rms, 60 Hz.
Input Data @ 25
°
C
Voltage: 24 and 120VAC, and 12 and 24VDC.
Power Requirement: AC Types: Typically less than 3 VA.
DC Types: Typically less than 3 W.
Transient Protection: Yes.
Reverse Voltage Protection: Yes.
Input Voltages & Limits @ 25
°
C
Voltage
Type
Nominal
Voltage
Minimum
Voltage
Maximum
Voltage
N.O. RELAY
CONTACTS
ON
OFF
TIME
Interval on (with control switch) – Input voltage must be applied continuously to operate the internal relay. The relay energizes and timing begins when the external switch is closed. At the end of the time delay period the relay will de-energize. Reset is accomplished by opening and reclosing the control switch.
AC
DC
24
120
12
24
20
105
11
20
Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage).
AC models will operate on 50 or 60 Hz.
28
130
13
32
CONTROL
SWITCH
ON
OFF
N.O. RELAY
CONTACTS
ON
OFF
TIME
Timing Specifications
Timing Ranges: From 0.1 to 1.0 sec. through 10 to 100 min.
Timing Adjustment: Knob adjustable.
Tolerance (for AC units add
±
1/2 cycle 60 Hz.):
Knob Adj. Types: –0, +30% of max. specified at high end of timing range; min. specified, or less, at low end.
Fixed Types:
±
10%.
Res. Adj. Types:
±
10% at high end of timing range; min. specified, or less, at low end.
Delta Time (for AC units add
±
1 cycle 60 Hz.):
±
10%.
Repeatability (for AC units add
±
1 cycle 60 Hz.):
±
2%.
Release Time: 60 ms, typ.; 100 ms, max.
Recycle Time: 60 ms, typ.; 100 ms, max.
1228
Dimensions are shown for reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise specified.
Environmental Data
Temperature Range: Storage: -55
°
C to +85
°
C.
Operating: -10
°
C to +55
°
C.
Mechanical Data
Termination: 8- or 11-pin octal style plug.
Enclosure: White plastic case. Knob adjustable types have dial scale for reference only.
Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) screw terminal sockets. 11-pin types fit either 27E123 or
27E892 (snap-on) screw terminal sockets.
Weight: 6 oz. (170g) approximately.
Specifications and availability subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Catalog 1308242
Issued 3-03
Ordering Information – Authorized distributors are more likely to stock boldface items listed below.
Delay on Operate Models
Voltage
24VAC
120VAC
12VDC
24VDC
Time
0.1 to 10 Sec.
1.8 to 180 Sec
0.1 to 1 Sec.
0.1 to 5 Sec.
0.1 to 10 Sec.
0.6 to 60 Sec.
1.8 to 180 Sec.
1 to 10 Min.
10 to 100 Min.
0.1 to 10 Sec.
0.1 to 1 Sec.
0.1 to 10 Sec.
0.6 to 60 Sec.
1.8 to 180 Sec.
Adjustment
Knob
Knob
Knob
Knob
Wiring Dia.
Part Number
1 CB-1041B-30
CB-1042B-30
1
1
1
CB-1001B-70
CB-1002B-70
CB-1003B-70
CB-1004B-70
CB-1005B-70
CB-1006B-70
CB-1007B-70
CB-1047D-20
CB-1026D-30
CB-1028D-30
CB-1029D-30
CB-1030D-30
Delay on Release Models
Voltage
24VAC
120VAC
24VDC
Time
0.1 to 10 Sec.
1.8 to 180 Sec
0.1 to 10 Sec.
0.1 to 10 Sec.
0.6 to 60 Sec.
1.8 to 180 Sec.
0.1 to 10 Sec.
1.8 to 180 Sec.
Interval on Models
Voltage
24VAC
120VAC
24VDC
Time
0.1 to 10 Sec.
0.1 to 5 Sec.
0.1 to 10 Sec.
1 to 10 Min.
0.1 to 5 Sec.
1.8 to 180 Sec.
Adjustment
Knob
Knob
Knob
Adjustment
Knob
Knob
Knob
P&B
Wiring Dia.
Part Number
3 CB-1045B-38
CB-1046B-38
3
3
3
5
3
CB-1021B-78
CB-1022B-78
CB-1023B-78
CB-1024B-78
CB-1038D-38
CB-1039D-38
Wiring Dia.
Part Number
1 CB-1043B-39
1
1
1
1
CB-1011B-79
CB-1014B-79
CB-1018B-79
CB-1034D-39
CB-1036D-39
Outline Dimensions
2.406 MAX.
(61.1)
.60
(15.2)
➛
➛
2.937 MAX.
(74.6)
➛
➛
.56
(14.2)
➛
1.781 MAX.
(45.2)
➛
Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway)
EXTERNAL
CONTROL
SWITCH*
EXTERNAL
CONTROL
SWITCH*
+
_
INPUT (DC POLARITY
INDICATED)**
Fig. 1
8 Pin
+
_
CONTINUOUS
SUPPLY
INPUT
(DC POLARITY INDICATED)**
Fig. 3
11 Pin
+
_
CONTINUOUS
SUPPLY
INPUT
(DC POLARITY INDICATED)**
Fig. 5
8 Pin
* If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: A dry circuit switch is recommended. A
“dry circuit” switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly.
** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”.
Dimensions are shown for reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise specified.
Specifications and availability subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
1229
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project