Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors

Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors
Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors
Stable ESR, Long Life, Snap-In
Type LP radial snap-in aluminum electrolytic
capacitors are small in size and are rated for low
voltage applications. Their durable construction
guarantees a long life while operating up to 105 ºC
with a stable ESR. These features make the Type LP
ideal for use in switch-mode power supplies.
Highlights
•
•
•
Specifications
Capacitance Range:
Voltage Range:
Capacitance tolerance:
Operating Temperature Range:
Dissipation Factor:
DC Leakage Test:
Voltage/Frequency Ripple Multipliers:
High Reliability
105 ºC
22 to 35 mm diameter with 10 mm lead spacing
100 to 47,000 µF
16 to 250 Vdc
±20%
–40 ºC to +105 ºC
DF at 120 Hz, +25 ºC
Vdc
16
25 - 35
50 - 63
100- 250
DF %
30
25
20
15
For values that are >1000 µF, the DF (%) increases
2% for every additional 1000 µF
I = .02CV
C = capacitance in µF
V = rated voltage
I = leakage current in µA
Rated
Ripple Multipliers
Vdc
60 Hz 100 Hz 300 Hz 1000 Hz 10 kHz 100 kHz
10 to 50
Temperature Ripple Multipliers:
0.90
1.00
1.03
1.05
1.10
1.10
63 to 100 0.85
1.00
1.07
1.13
1.19
1.20
160 to 250 0.80
1.00
1.15
1.25
1.35
1.40
Temperature
Ripple Multiplier
+85 ºC
1.65
+65 ºC
2.25
+45 ºC
2.55
The maximum ripple current at 105 ºC and 120 Hz are
the Ratings Table. Adjust to other temperature and frequencies using the tables here.
Load Life Test:
Complies with the EU Directive
2002/95/EC requirement restricting
the use of Lead (Pb), Mercury (Hg),
Cadmium (Cd), Hexavalent chromium
(Cr(VI)), PolyBrominated Biphenyls
(PBB) and PolyBrominated Diphenyl
Ethers (PBDE).
Shelf Life:
Vibration:
1,000 h @ full load at +105 ºC per EIA IS-749
∆ Capacitance ±20%
ESR 200% of limit
DCL 100% of limit
500 h @ 105 ºC, capacitance, ≤200% ESR and
DC ±20%, initial requirements
10 to 55 Hz, 0.06” and 10 g max, 2 h in each
plane
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors
Part Numbering System
LP
332
M
025
A1
P
3
Case
Type
LP
Cap
821 = 820 µF
Tolerance
Voltage
M = ±20%
025 = 25 Vdc
332 = 3300 µF
Code
Outline Drawing
Polarity
Sleeve
P = Polarized
Diameter
250 = 250 Vdc
103 = 10,000 µF
Insulating
Length
25
30
35
3 = PVC
mm
(in)
40
45
50
mm
(in)
22
(0.87)
(1.00) (1.18) (1.38) (1.57) (1.77) (2.00)
A1
A3
A5
A7
A4
A9
25
(1.00)
C1
C3
C5
C7
C4
C9
30
(1.18)
E1
E3
E5
E7
E4
E9
35
(1.38)
H1
H3
H5
H7
H4
H9
Insulation Disk
Ratings
Cap
(µF)
Catalog
Part Number
4,700
5,600
8,200
12,000
15,000
22,000
27,000
33,000
47,000
LP472M016A1P3
LP562M016C1P3
LP822M016A5P3
LP123M016E3P3
LP153M016H3P3
LP223M016E7P3
LP273M016H7P3
LP333M016H9P3
LP473M016E9P3
2,700
3,300
3,300
4,700
5,600
5,600
6,800
10,000
12,000
15,000
22,000
LP272M025C1P3
LP332M025A1P3
LP332M025C1P3
LP472M025C1P3
LP562M025E1P3
LP562M025C3P3
LP682M025C5P3
LP103M025H3P3
LP123M025H3P3
LP153M025E7P3
LP223M025H9P3
Max ESR Max Ripple
@ 120 Hz @ 120 Hz
+25 ºC
+105 ºC
(Ω)
(A)
16 Vdc; 20 Vdc Surge
0.141
1.20
0.120
1.43
0.081
1.82
0.055
2.38
0.046
3.00
0.030
3.53
0.025
4.27
0.020
5.00
0.020
6.80
25 Vdc; 32 Vdc Surge
0.180
1.000
0.151
1.160
0.150
1.143
0.106
1.480
0.090
1.857
0.089
1.730
0.073
1.940
0.050
3.333
0.041
2.970
0.033
3.360
0.023
4.857
Size
(Inches)
D
L
Size
(mm)
D
L
0.866
0.984
0.866
1.181
1.378
1.181
1.378
1.378
1.181
0.984
0.984
1.378
1.181
1.181
1.575
1.575
1.969
1.969
22
25
22
30
35
30
35
35
30
25
25
35
30
30
40
40
50
50
0.984
0.866
0.984
0.984
1.181
0.984
0.984
1.378
1.378
1.181
1.378
0.984
0.984
0.984
0.984
0.984
1.181
1.378
1.181
1.181
1.575
1.969
25
22
25
25
30
25
25
35
35
30
35
25
25
25
25
25
30
35
30
30
40
50
Cap
(µF)
Catalog
Part Number
1,800
2,700
3,900
5,600
6,800
6,800
8,200
10,000
12,000
15,000
LP182M035A1P3
LP272M035C1P3
LP392M035E1P3
LP562M035E3P3
LP682M035E5P3
LP682M035C7P3
LP822M035H3P3
LP103M035E7P3
LP123M035H7P3
LP153M035H9P3
1,200
1,500
2,200
2,200
3,300
3,300
3,300
3,900
4,700
LP122M050A1P3
LP152M050A1P3
LP222M050A5P3
LP222M050E1P3
LP332M050E3P3
LP332M050C5P3
LP332M050C3P3
LP392M050C7P3
LP472M050H3P3
Max ESR Max Ripple
@ 120 Hz @ 120 Hz
+25 ºC
+105 ºC
(Ω)
(A)
35 Vdc; 44 Vdc Surge
0.188
1.040
0.155
1.257
0.108
1.571
0.074
2.050
0.060
2.286
0.061
2.320
0.051
2.690
0.041
3.000
0.035
3.590
0.028
4.000
50 Vdc; 63 Vdc Surge
0.280
0.860
0.225
0.983
0.151
1.330
0.150
1.429
0.101
0.176
0.101
1.710
0.101
1.710
0.085
1.970
0.071
2.270
Size
(Inches)
D
L
Size
(mm)
D
L
0.866
0.984
1.181
1.181
1.181
0.984
1.378
1.181
1.378
1.378
0.984
0.984
0.984
1.181
1.378
1.575
1.181
1.575
1.575
1.969
22
25
30
30
30
25
35
30
35
35
25
25
25
30
35
40
30
40
40
50
0.866
0.866
0.866
1.181
1.181
0.984
0.984
0.984
1.378
0.984
0.984
1.378
0.984
1.181
1.378
1.181
1.575
1.181
22
22
22
30
30
25
25
25
35
25
25
35
25
30
35
30
40
30
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors
Cap
(µF)
Catalog
Part Number
5,600
6,800
6,800
8,200
LP562M050H5P3
LP682M050E7P3
LP682M050E9P3
LP822M050H9P3
820
1,200
1,800
1,800
2,200
3,300
4,700
6,800
LP821M063A1P3
LP122M063C1P3
LP182M063A7P3
LP182M063E1P3
LP222M063E3P3
LP332M063H3P3
LP472M063E9P3
LP682M063H9P3
820
2,200
2,700
2,700
LP821M100E1P3
LP222M100H7P3
LP272M100H9P3
LP272M100H7P3
150
150
180
220
220
220
270
270
330
390
470
LP151M200C1P3
LP151M200A1P3
LP181M200C1P3
LP221M200C1P3
LP221M200E1P3
LP221M200A3P3
LP271M200E1P3
LP271M200C3P3
LP331M200E3P3
LP391M200C5P3
LP471M200E5P3
Max ESR Max Ripple
@ 120 Hz
@ 120 Hz
+25 ºC
+105 ºC
(Ω)
(A)
50 Vdc; 63 Vdc Surge
0.059
2.60
0.049
3.16
0.049
3.16
0.040
3.43
63 Vdc; 75 Vdc Surge
0.300
0.77
0.210
0.99
0.138
1.34
0.140
1.37
0.113
1.55
0.076
1.20
0.053
2.84
0.037
3.36
100 Vdc; 125 Vdc Surge
0.3
0.98
0.113
2.03
0.092
2.32
0.092
2.32
200 Vdc; 250 Vdc Surge
1.650
0.509
1.650
0.509
1.400
0.571
1.100
0.646
1.100
0.646
1.130
0.660
0.920
0.790
0.920
0.790
0.750
0.886
0.640
0.980
0.540
1.143
Size
(Inches)
D
L
Size
(mm)
D L
Cap
Max ESR
Max Ripple
Catalog
@ 120 Hz
@ 120 Hz
Size
Size
Part Number
+25 ºC
+105 ºC
(Inches)
(mm)
(Ω)
(A)
(µF)
1.378
1.181
1.181
1.378
1.378
1.575
1.969
1.969
35
30
30
35
35
40
50
50
0.866
0.984
0.866
1.181
1.181
1.378
1.181
1.378
0.984
0.984
1.575
0.984
1.181
1.181
1.969
1.969
22
25
22
30
30
35
30
35
25
25
40
25
30
30
50
50
1.181
1.378
1.378
1.378
0.984
1.575
1.969
1.575
30
35
35
35
25
40
50
40
0.984
0.866
0.984
0.984
1.181
0.866
1.181
0.984
1.181
0.984
1.181
0.984
0.984
0.984
0.984
0.984
1.181
0.984
1.181
1.181
1.378
1.378
25
22
25
25
30
22
30
25
30
25
30
25
25
25
25
25
30
25
30
30
35
35
D
L
D
L
200 Vdc; 250 Vdc Surge
470
LP471M200E1P3
0.540
1.140
1.181 0.984 30
25
470
LP471M200H3P3
0.540
1.143
1.378 1.181 35
30
560
LP561M200H3P3
0.440
1.310
1.378 1.181 35
30
680
LP681M200E3P3
0.370
1.520
1.181 1.181 30
30
680
LP681M200E5P3
0.370
1.510
1.181 1.378 30
35
680
LP681M200H1P3
0.370
1.510
1.378 0.984 35
25
820
LP821M200H7P3
0.300
1.750
1.378 1.575 35
40
820
LP821M200H3P3
0.300
1.750
1.378 1.181 35
30
1,000
LP102M200H9P3
0.250
2.114
1.378 1.969 35
50
1,000
LP102M200H5P3
0.250
2.114
1.378 1.378 35
35
1200
LP122M200E9P3
0.165
2.810
1.181 1.969 30
50
1,200
LP122M200H5P3
0.165
2.740
1.378 1.378 35
35
1,500
LP152M200H4P3
0.134
3.330
1.378 1.772 35
45
1,800
LP182M200H9P3
0.112
3.800
1.378 1.969 35
50
250 Vdc; 300 Vdc Surge
100
LP101M250A1P3
2.500
0.410
0.866 0.984 22
25
150
LP151M250C1P3
1.660
0.540
0.984 0.984 25
25
180
LP181M250C3P3
1.400
0.686
0.984 1.181 25
30
220
LP221M250E1P3
1.130
0.710
1.181 0.984 30
25
270
LP271M250C3P3
0.922
0.840
0.984 1.181 25
30
330
LP331M250E3P3
0.750
0.914
1.181 1.181 30
30
390
LP391M250H3P3
0.640
1.090
1.378 1.181 35
30
470
LP471M250E7P3
0.530
1.260
1.181 1.575 30
40
470
LP471M250H1P3
0.530
1.260
1.378 0.984 35
25
560
LP561M250H3P3
0.347
1.800
1.378 1.181 35
30
680
LP681M250E9P3
0.370
1.920
1.181 1.969 30
50
680
LP681M250H5P3
0.370
2.070
1.378 1.378 35
35
820
LP821M250H7P3
0.243
2.400
1.378 1.575 35
40
1,000
LP102M250H4P3
0.200
2.720
1.378 1.772 35
45
1,200
LP122M250H9P3
0.165
3.100
1.378 1.969 35
50
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement