Eaton Logic Controller (ELC)

Eaton Logic Controller (ELC)
Eaton Logic Controller (ELC)
The Eaton Logic Controller.
Compact, modular, and ready to
communicate. It’s the cost-effective
solution to machine control.
The Eaton Logic Controller (ELC) puts sophisticated
PLC logic, an extensive set of I/O, and communications
capabilities in packages as small as 1"W x 2.4"D x 3.5"H.
2
Half the size of most PLCs, the
Cutler-Hammer ELC puts the
right amount of I/O right where
you need it.
ELC Controller and Expansion Modules
The right amount of I/O.
Why pay for functionality you don’t need? Why be trapped
with functionality you can’t scale to meet changing needs?
Eaton is changing everything with the ELC.
At less than half the size of most PLCs, the Cutler-Hammer
ELC is an ideal solution when space is at a premium and
specialized I/O needs present themselves.
Space saving. Cost saving.
This space-saving design is as perfectly at home in a
small machine control station as it is in an MCC and other
enclosed applications where space is critical. Reduced space
also means smaller control cabinets and panels, or more
capability in the same amount of space. However you look
at it, the ELC means value.
ELC Programming Software
Program on your PC and download to the ELC through a serial cable or over
Ethernet. Make online changes, monitor and remote control the run/stop
operation. Software wizards simplify the programming process.
eaton corporation Logic Controller
3
Machine space
is measured in inches.
The ELC is measured
the same way.
Add value with the ELC.
While the ELC is perfectly suited for small applications of
40 I/O and less, it can also be expanded to 512 I/O. What’s
more, with the ELC’s two communication ports it can
provide a network of distributed controls. The ELC is
capable of sharing information with other control and
operator interface devices. Its small size allows for reduced
panel size, and saves valuable machine space.
4
ELC’s value added
differences.
More Controller Features
••
5 controller styles:
••
••
••
••
••
PB Base Model—
14 I/O (8i/6o)
Over 130 instructions
provide all the power
you need. Two serial
ports for master/slave
communications.
••
••
PC Clock/Calendar Model—
12 I/O (8i/4o)
Same as the PB model,
plus clock/calendar,
twice the program steps,
distributed I/O, and
retentive data storage.
PA Analog Model—
10 I/O (6i/4o)
Same as the PC model,
plus embedded analog I/O.
PH High-Speed Model—
12 I/O (8i/4o)
Same as the PC model,
plus the ability to capture
or output 100 kHz pulses.
PV Advanced Model—
28 I/O (16i/12o)
Almost 10 times faster than
the other ELC controllers,
high speed I/O to 200 kHz,
and additional advanced
features. Add left side
expansion modules for
master communications
on networks such as
Ethernet and DeviceNet .
••
••
High-speed pulse capture
and high-speed pulse
output on all controllers.
Broad selection of AC/DC
In, relay/transistor and high
current output modules.
Large selection of analog
In/Out in various I/O
counts per module.
2 Modbus (ASCII / RTU)
serial ports: 1 slave only,
1 master/slave.
®
Over 200 instructions to
choose from: Floating point
math, communications,
16- and 32-bit math,
logical, block move, block
compare, retentive data
storage, conversion, time
base from clock/calendar.
ELC benefits solve
applications:
Flexibility—ELC controllers
expand from 28 to 512 I/O
on the PV models, and 10 to
256 I/O on all other models.
••
••
Add only the amount of
I/O you need. Choose I/O
counts as small as 2 points
and as large as 16 points
per module.
DIN-rail mounting lets you
add as many modules as
needed by snapping them
into mating connectors.
Large PLC Features—
Multiple communications
ports, distributed I/O
capability, high speed
counters, high speed pulse
outputs, interrupts, timer
resolution to 1ms, PIDs,
plus much more.
Software—ELCSoft
programs in standard ladder
or sequential function chart
programming.
••
••
••
Display registers “in use”
and modules attached to
the ELC.
Monitor runtime
applications. Force (except
PB model), and enter/
modify register values.
Wizards aid programming of
ELC Link for distributed I/O,
standard communications,
high speed counters,
pulse outputs, positioning,
interrupts, PIDs, and
extension module setup.
Communications—
Connecting to networks is
easy on Modbus , Modbus
TCP, DeviceNet , and
Profibus.
®
™
Size—large PLC features in
a 1" package. Half the size of
competitive offerings. ELC
can retrofit more I/O in the
same space or allow more
cost savings by reducing
cabinet size.
™
No racks required
A DIN-rail lets you add as many modules as desired. Just snap on, and slide
into place. All connections are done automatically.
Built-in display
An integral LED display on some models provides user-assigned process
monitoring, error messages, alarms, display counts and more.
eaton corporation Logic Controller
5
ELC Features and Specifications
ELC Controller Features and Specifications
Controller
ELC-PB14NNDR/DT
ELC-PA10AADR/DT ELC-PC12NNAR/DR/DT ELC-PH12NNDT
ELC-PV28NNDR/DT
25.2 x 90 x 60
37.4 x 90 x 60
70 x 90 x 60
Dimensions WxHxD (mm)
256 (128 In/128 Out)
512 (256 In/256 Out)
Maximum I/O—Expandable
14 (8 DI/6DO)
10 (4DI/2DO/2AI/2AO)
12 (8 DI/4 DO)
28 (16DI/12DO)
I/O Type—Embedded
Yes
DC In Sink/Source
Basic instructions—2 µs minimum
0.24 µs minimum
Execution Speed
Instructions + Ladder Logic + SFC
Program Language
3792
7920
15,872
Program Capacity (steps)
1280
4096
Data Memory Capacity (bits)
744
5000
10,000
Data Memory Capacity (words)
2
8
16
Index Registers
None
1600 Words
10,000 Words
File Memory Capacity (words)
Yes
Retentive Storage
32/107
32/168
32/193
Commands Basic/Advanced
Yes
Floating Point
128
1024
SFC Commands (steps)
128
244 standard with additional timers for subroutine and retentive applications
Timers Qty
1–100ms
Timers Resolution
128
250
253
Counters Qty
Up to 4
Up to 6
Up to 8
Up to 8
High Speed Counters (See Note)
1 at 30 kHz
1 at 100 kHz
2 at 200 kHz
Max High Speed Counting (See Note)
2 at 20 kHz
2 channels, 10 kHz Max
2 channels, 50 kHz Max
100 kHz
200 kHz
Pulse Output
Yes
PID
8 Loops
Master Control Loop
64 Subroutines
256 Subroutines
Subroutines
Yes
For/Next Loops
6
15
22
Interrupts
No
Built-in
Real-time Clock / Calendar
Yes
Password Security
Yes
Diagnostic Relays
Yes
Diagnostic Word Registers
8 (Analog In/Analog Out/TC/RTD/PT) Modules do not count in total I/O
Specialty Expansion Modules
2 Modbus (ASCII/RTU) 1=Slave (RS-232)/1=Master-Slave (RS-485)
Serial Ports
No
With 16 other devices
With 32 other devices
Remote I/O
No
Yes
Run Time Editing
Yes
Run / Stop Switch
®
Removable Terminal Strips
Special Features
Yes
—
2, 7-Segment Displays
2 Potentiometers
2 Potentiometers
High-speed, left side bus
Note: High speed counter inputs can be used for different types of 32-bit counting, such as single-ended, single-phase two inputs, and quadrature.
Therefore, all high speed counters may not be used at the same time. Please refer to the ELC Systems Manual, MN05003003E, for details.
6
eaton corporation Logic Controller
ELC Expansion Module Features
Input Unit
Digital I/O Model
Power
Point
Dimensions WxHxD (mm) 25.2 x 90 x 60
ELC-EX08NNAN
ELC-EX08NNDN
ELC-EX08NNNR
ELC-EX08NNNT
24 Vdc
ELC-EX06NNNI
ELC-EX08NNDR
ELC-EX16NNDR
ELC-EX08NNDT
ELC-EX16NNDT
Output Unit
Type
8
8
0
0
0
4
8
4
8
Point
AC
Power
Point
Dimensions WxHxD (mm) 25.2 x 90 x 60
ELC-AN02NANN
ELC-AN04NANN
ELC-AN06AANN
24 Vdc
ELC-AN04ANNN
ELC-PT04ANNN
ELC-TC04ANNN
—
—
Relay
Transistor
High Current Relay
Relay
Transistor
Output Unit
Type
0
0
4
4
4
4
0
0
8
8
6
4
8
4
8
DC Sink or
Source
Input Unit
Analog I/O Model
Type
Point
—
–20mA~+20mA
–10V~+10V
Platinum Temp.
Thermocouple
Type
2
4
2
0
0
0
0~+20mA OV~+10V
—
Electrical Specifications
Input Voltage
Requirements
Power Consumption
Insulation Resistance
Noise Immunity
Temperature
Vibration/Shock
Resistance
Certifications
ELC: 24 Vdc (–15%~+20%) (with DC input reverse polarity protection),
Expansion Unit: supplied by the ELC
Typically 3–6W
>5 MΩ at 500 Vdc (Between all inputs/outputs and earth)
ESD: 8 kV Air Discharge EFT: Power Line 2 kV, Digital I/O: 1 kV, Analog & Communication I/O:
1 kV Damped-Oscillatory Wave: Power Line: 1 kV, Digital I/O: 1 kV RS: 26 MHz–1 GHz, 10 V/m
Operation: 0ºC~55ºC (Temperature), 50~95% (Humidity), Pollution degree 2;
Storage: –40ºC~70ºC (Temperature), 5~95% (Humidity)
Standard: IEC1131-2, IEC 68-2-6 (TEST Fc)/IEC1131-2 & IEC 68-2-27 (TEST Ea)
C-Tick, cULus, CE, Class I Div 2 Groups A, B, C, D
ELC Accessories
Catalog Number
Description
ELC-PS01
ELC-PS02
ELC-HHP
ELC-CBPCELC3
ELC-CBPCGP3
ELC-GPXFERMOD
ELC-ACPGMXFR
ELC-ACCOVER
24 Watt, 1 Amp Power Supply
48 Watt, 2 Amp Power Supply
Hand-Held Programmer (includes cable)
Cable to Connect a PC or ELC-GP unit to ELC, 3 meters (DB9 pin female to 8 pin DIN)
Cable to Connect a PC to an ELC-GP unit, 3 meters (DB9 pin female to DB9 pin female)
Program transfer module for ELC-GP units
Program transfer module for ELC controllers
Plate mount for specialty modules, qty. 10
ELC Starter Kit (includes ECL-PA10AADT, ELC-PS01, ELC-GP04, ELC-CBPCELC3,
ELC-CBPCGP3, ELCSoft, ELCSoft GP)
10/100 Ethernet Module, need ELC-PV, ModbusTCP, P-P, for use with ELC-PV only
DeviceNet Module, need ELC-PV, Scanner, Poll, CC, COS, BS, for use with ELC-PV only
Profibus DP Slave Module
DeviceNet Slave Module
RS-485 Easy Connect Adapter, DB9, RJ-12, 2-Pin Connections to RS-485
Motion Control, 1 Axis Module (Up to 8 Modules per Controller)
ELCSTARTKIT1
ELC-COENETM
ELC-CODNETM
ELC-COPBDP
ELC-CODNET
ELC-485APTR
ELC-MCO1
™
™
eaton corporation Logic Controller
7
Eaton Corporation is a diversified
power management company
ranked among the largest
Fortune 500 companies. The
electrical group is Eaton’s largest
division and is a global leader
in electrical control, power
distribution, power quality,
automation, and monitoring
products and services.
Eaton’s global electrical brands,
including Cutler-Hammer ,
MGE Office Protection
Systems , Powerware , Holec ,
MEM , Santak and Moeller,
provide customer-driven
PowerChain Management
solutions to serve the power
system needs of the industrial,
institutional, government,
utility, commercial, residential,
IT, mission critical and OEM
markets worldwide.
®
®
®
®
®
®
PowerChain Management
solutions help enterprises
achieve sustainable and
competitive advantages through
proactive management of the
power system as a strategic,
integrated asset throughout
its life cycle. With Eaton’s
distribution, generation and
power quality equipment;
full-scale engineering services;
and information management
systems, the power system
is positioned to deliver
powerful results: greater
reliability, operating cost
efficiencies, effective use of
capital, enhanced safety, and
risk mitigation.
Eaton Corporation
Electrical Group
1000 Cherrington Parkway
Moon Township, PA 15108
United States
877-ETN-CARE (877-386-2273)
Eaton.com
© 2008 Eaton Corporation
All Rights Reserved
Printed in USA
Publication No. BR05003001E
December 2008
PowerChain Management is a registered
trademark of Eaton Corporation.
All other trademarks are property of their
respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement