SBR1U400P1 Features Mechanical Data

SBR1U400P1 Features Mechanical Data
SBR1U400P1
NEW PRODUCT
1.0A SBR®
SURFACE MOUNT SUPER BARRIER RECTIFIER
PowerDI®123
Features
Mechanical Data
•
•
•
•
•
•
•
•
•
•
•
•
Ultra Low Forward Voltage Drop
Low Leakage Current
Superior Reverse Avalanche Capability
Excellent High Temperature Stability
Patented Interlocking Clip Design for High Surge Current
Capacity
Patented Super Barrier Rectifier Technology
Soft, Fast Switching Capability
150ºC Operating Junction Temperature
Lead Free Finish, RoHS Compliant (Note 1)
“Green” Molding Compound (No Br, Sb)
®
Case: PowerDI 123
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Polarity Indicator: Cathode Band
Terminals: Finish - Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Marking Information: See Page 3
Ordering Information: See Page 3
Weight: 0.018 grams (approximate)
•
•
•
•
•
•
Top View
Maximum Ratings
@TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current (See Figure 1)
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Symbol
VRRM
VRWM
VRM
IO
Value
Unit
400
V
1.0
A
IFSM
40
A
Symbol
RθJA
RθJA
TJ, TSTG
Value
217
138
-65 to +175
Unit
ºC/W
ºC/W
ºC
Thermal Characteristics
Characteristic
Maximum Thermal Resistance Junction to Ambient (Note 2)
Maximum Thermal Resistance Junction to Ambient (Note 3)
Operating and Storage Temperature Range
Electrical Characteristics
Characteristic
@TA = 25°C unless otherwise specified
Forward Voltage
VF
Reverse Current (Note 4)
IR
Min
-
Reverse Recovery Time
trr
-
Notes:
Symbol
Typ
0.82
-
Max
0.90
0.80
50
Unit
-
85
ns
V
μA
Test Condition
IF = 1.0A, TJ = 25ºC
IF = 1.0A, TJ = 125ºC
VR = 400V, TJ = 25ºC
IF = 0.5A, IR = 1A,
IRR = 0.25A
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
SBR and PowerDI are registered trademarks of Diodes Incorporated.
1 of 4
SBR1U400P1
Document number: DS31877 Rev. 2 - 2
www.diodes.com
August 2010
© Diodes Incorporated
0.1
IR, INSTANTANEOUS REVERSE CURRENT (µA)
IF, INSTANTANEOUS FORWARD CURRENT (A)
1
T A = 150°C
T A = 125°C
0.01
TA = 85°C
TA = 25°C
0.001
0.0001
0.00001
1,000
TA = 150°C
100
T A = 125°C
10
TA = 85°C
1
TA = 25°C
0.1
0.01
0
200
400
600
800
1,000
VF, INSTANTANEOUS FORWARD VOLTAGE (mV)
Fig. 1 Typical Forward Characteristics
0
100
50 100 150 200 250 300 350 400
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Fig. 2 Typical Reverse Characteristics
IF(AV), AVERAGE FORWARD CURRENT (A)
1.2
CT, TOTAL CAPACITANCE (pF)
f=1MHz
10
0.1
1
10
100
VR, DC REVERSE VOLTAGE (V)
Fig. 3 Total Capacitance vs. Reverse Voltage
1.0
Note 3
0.8
0.6
0.4
0.2
0
0
25
50
75
100
125
TA, AMBIENT TEMPERATURE (°C)
Fig. 4 Forward Current Derating Curve
150
175
TA, DERATED AMBIENT TEMPERATURE (°C)
NEW PRODUCT
SBR1U400P1
150
125
100
75
50
25
0
0
20
40 60 80 100 120 140 160 180 200
VR, DC REVERSE VOLTAGE (V)
Fig. 5 Operating Temperature Derating
SBR and PowerDI are registered trademarks of Diodes Incorporated.
2 of 4
SBR1U400P1
Document number: DS31877 Rev. 2 - 2
www.diodes.com
August 2010
© Diodes Incorporated
SBR1U400P1
Ordering Information (Note 5)
Part Number
SBR1U400P1-7
Notes:
Case
®
PowerDI 123
Packaging
3000/Tape & Reel
5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
SDE
Date Code Key
Year
Code
Month
Code
2009
W
Jan
1
2010
X
Feb
2
SDE = Product Type Marking Code
YM = Date Code Marking
Y = Year (ex: W = 2009)
M = Month (ex: 9 = September)
YM
NEW PRODUCT
Marking Information
2011
Y
Mar
3
Apr
4
2012
Z
May
5
Jun
6
2013
A
Jul
7
2014
B
Aug
8
Sep
9
Oct
O
2015
C
Nov
N
Dec
D
Package Outline Dimensions
B
C
E
®
PowerDI 123
Dim Min Max Typ
A 3.50 3.90 3.70
B 2.60 3.00 2.80
C 1.63 1.93 1.78
D 0.93 1.00 0.98
E
0.85 1.25 1.00
H 0.15 0.25 0.20
L
0.55 0.75 0.65
L1 1.80 2.20 2.00
L2 0.95 1.25 1.10
All Dimensions in mm
D
H
L
L1
L2
E
A
Suggested Pad Layout
X1
Y2
G
X2
Y1
Dimensions
G
X1
X2
Y1
Y2
SBR and PowerDI are registered trademarks of Diodes Incorporated.
3 of 4
SBR1U400P1
Document number: DS31877 Rev. 2 - 2
www.diodes.com
Value (in mm)
1.0
2.2
0.9
1.4
1.4
August 2010
© Diodes Incorporated
SBR1U400P1
IMPORTANT NOTICE
NEW PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
SBR and PowerDI are registered trademarks of Diodes Incorporated.
4 of 4
SBR1U400P1
Document number: DS31877 Rev. 2 - 2
www.diodes.com
August 2010
© Diodes Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement