4790 Cord Connectors (rewireable) www.schurter.com/PG07 IEC Connector C19, Rewireable, Angled C19 70° C Description Characteristics -Rewireable connector for cable 90° entry: Screwing cable terminal -Connector, Pin temperature 70 °C, Protection class I -Screw clamps -Suitable for use in equipment according to IEC 60950 References Substitute for type 1651 Weblinks Approvals -VDE Certificate Number: 40036952 -CSA File Number: 205419 -CCC File Number: 2009010204383057 pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, CADDrawings, Accessories, Mounting instruction, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 16 A / 250 VAC; 50 Hz 20 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Suitable for appliances with protection class I acc. to IEC 61140 Screw Thermoplastic, black, UL 94V-0 Allowable Operation Temp. Protection Class Terminal Material: Housing Connector C19 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I Dimensions 22 76.3 52 31.5 40.9 Variants Color Max. cable diameter Max. wire size Order Number black 8.7 mm 3 x 1.5 mm² / 3 x 16 AWG 4790.1100 black 10 mm 3 x 2.1 mm² / 3 x 14 AWG 4790.1200 Max. torque for screws: Terminals: 0.8 Nm, Cable clamps: 0.8 Nm, Cover: 0.5 Nm Packaging unit 50 Pcs Connectors 4790 Cord Connectors (rewireable) www.schurter.com/PG07 Mating Inlets/Plugs Category / Description Appliance Inlet Overview complete IEC Appliance Inlet C20, Screw-on Mounting, Rear Side, PCB Terminal 1601 IEC Appliance Inlet C20, Screw-on Mounting, Front Side, Solder, Quick-connect or Screw Terminal 1621 IEC Appliance Inlet C20, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4793 IEC Appliance Inlet C24, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4794 IEC Appliance Inlet C20, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4798 Appliance Inlet further types to 4790 Appliance inlets/-outlets Overview complete Plug Coupler IEC C20 / IEC J, Screw-on Mounting 4730 Appliance inlets/-outlets further types to 4790 Plug Overview complete IEC Plug I, Cord Connector (Rewireable), Straight 0106 IEC Plug I, Cord Connector (Rewireable), Angled 1611 IEC Plug I, Cord Connector (Rewireable), Straight 1612 IEC Plug I, Cord Connector (Rewireable), Angled 4789 IEC Plug I, Cord Connector (Rewireable), Straight 4796 Plug further types to 4790 Power Entry Module Overview complete IEC Appliance Inlet C20 with Circuit Breaker 1624-K IEC Appliance Inlet C20 with Line Switch, 1- or 2-pole EC11 IEC Appliance Inlet C20 with Circuit Breaker TA45 EF11 EG11 Power Entry Module further types to 4790 Power Entry Module with line filter Overview complete 5130 IEC Appliance Inlet C20 with Filter, Front or Rear Side Mounting C20F IEC Appliance Inlet C22 for Hot Conditions, with Filter for High Temperatures, Front Side Mounting C22F IEC Appliance Inlet C20 with Filter, Line Switch 2-pole EC12 IEC Appliance Inlet C20 with Filter, Circuit Breaker TA45 (recessed) EF12 Power Entry Module with line filter further types to 4790 ... 30.08.2013 IEC Appliance Inlet C20 with Filter, ECO design, front or rear side Mounting The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project