2STR1215 Low voltage fast-switching NPN power transistor Features

2STR1215 Low voltage fast-switching NPN power transistor Features
2STR1215
Low voltage fast-switching NPN power transistor
Features
■
Very low collector-emitter saturation voltage
■
High current gain characteristic
■
Fast switching speed
■
Miniature SOT-23 plastic package for surface
mounting circuits
3
2
1
Applications
SOT-23
■
LED
■
Battery charger
■
Voltage and relay driver
■
Voltage regulation
Figure 1.
Internal schematic diagram
Description
The 2STR1215 is a NPN transistor manufactured
using new “PB-HCD” (power bipolar high current
density) technology. The resulting transistor
shows exceptional high gain performances
coupled with very low saturation voltage.
The complementary PNP is the 2STR2215.
Table 1.
Device summary
Order code
Marking
Package
Packaging
2STR1215
115
SOT-23
Tape and reel
January 2009
Rev 4
1/9
www.st.com
9
Electrical ratings
1
2STR1215
Electrical ratings
Table 2.
Absolute maximum ratings
Symbol
Parameter
Unit
VCBO
Collector-base voltage (IE = 0)
15
V
VCEO
Collector-emitter voltage (IB = 0)
15
V
VEBO
Emitter-base voltage (IC = 0)
5
V
1.5
A
3
A
0.5
W
-65 to 150
°C
150
°C
Value
Unit
250
°C/W
IC
Collector current
ICM
Collector peak current (tP < 5 ms)
Ptot
Total dissipation at Tamb = 25 °C
Tstg
Storage temperature
TJ
Table 3.
Symbol
Max. operating junction temperature
Thermal data
Parameter
Rthj-amb(1) Thermal resistance junction-amb
1. Device mounted on PCB area of 1cm2
2/9
Value
__max
2STR1215
2
Electrical characteristics
Electrical characteristics
(Tcase = 25°C unless otherwise specified)
Table 4.
Symbol
Electrical characteristics
Parameter
Test conditions
Min.
Typ.
Max.
Unit
ICBO
Collector cut-off current
(IE =0)
VCB = 15 V
0.1
µA
IEBO
Emitter cut-off current
(IC =0)
VEB = 4 V
0.1
µA
Collector-base
breakdown voltage
(IE = 0)
IC = 100 µA
15
V
Collector-emitter
V(BR)CEO (1) breakdown voltage
(IB = 0)
IC = 10 mA
15
V
IE = 100 µA
5
V
V(BR)CBO
V(BR)EBO
VCE(sat) (1)
VBE(sat) (1)
hFE (1)
CCBO
ton
toff
Emitter-base breakdown
voltage (IC = 0)
Collector-emitter
saturation voltage
Base-emitter saturation
voltage
DC current gain
Collector-base
capacitance (IE = 0 )
Resistive load
Turn-on time
Turn-off time
IC = 0.1 A
IB = 1mA
IC = 1 A
IB = 100 mA
IC = 2 A
IB = 200 mA
IC = 1 A
IB = 100 mA
IC = 50 mA
VCE = 2 V
IC = 0.5 A
VCE = 2 V
IC = 1 A
VCE = 2 V
IC = 2 A
VCE = 2 V
VCB = 10 V
f = 1 MHz
IC = 1.5 A
VCC = 10 V
IB1 = -IB2 = 150 mA
200
200
130
80
V
0.25
0.4
0.15
0.5
0.85
0.9
1.25
V
280
560
V
V
16
pF
60
310
ns
ns
1. Pulsed duration = 300 µs, duty cycle ≤1.5%
3/9
Electrical characteristics
2STR1215
2.1
Electrical characteristics (curves)
Figure 2.
DC current gain
Figure 3.
Collector-emitter saturation voltage
Figure 4.
Base-emitter saturation voltage
Figure 5.
Resistive load switching time
Figure 6.
Resistive load switching
time
Figure 7.
Capacitance
4/9
2STR1215
2.2
Electrical characteristics
Test circuits
Figure 8.
Resistive load switching test circuit
1) Fast electronic switch
2) Non-inductive resistor
5/9
Package mechanical data
3
2STR1215
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
6/9
2STR1215
Package mechanical data
SOT-23 mechanical data
mm.
DIM.
min.
typ
max.
A
0.89
1.4
A1
0
0.1
B
0.3
0.51
C
0.085
0.18
D
2.75
3.04
e
0.85
1.05
e1
1.7
2.1
E
1.2
1.6
H
2.1
2.75
L
S
0.6
0.35
0.65
0053390_H
7/9
Revision history
4
2STR1215
Revision history
Table 5.
8/9
Document revision history
Date
Revision
Changes
09-Feb-2006
1
Initial release
18-Jul-2006
2
New template
08-Sep-2008
3
Updated the SOT-23 mechanical data
08-Jan-2009
4
Updated Figure 1: Internal schematic diagram
Updated statement ECOPACK®
2STR1215
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE
GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
9/9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement