LinkMaster™ PRO Tester
LinkMaster™ PRO Tester
■ Tests for shorts, opens,
miswires, reversals, split
pairs, and shield continuity
■ Measures length on UTP,
ScTP, and coax with or
without remotes
■ Identifies up to eight twisted
pair and coax remotes
■ Tone generator sends up
to four different tones
■ Test results displayed in
wire map format
■ Snap-off battery cap allows
for easy battery change
■ Two size kits with unshielded
and shielded cables
3
2
1
6
5
4
7
*
8
0
9
#
LinkMaster™ PRO Tester
Main Jack for all Testing
Remote Jack for Patch Cords
The LinkMaster™ PRO Tester enables installers,
contractors and maintenance technicians to map, test
and troubleshoot data and voice communication cable
and coax runs. Rugged, versatile, and easy-to-use, the
LinkMaster™ PRO tester has mastered the link between
performance, simplicity and value for both commercial
and residential applications.
Features
■ Two line by 16 character full alphanumeric LCD with
icons for clear results
■ Tests for shield continuity, shorts, opens, miswires,
reversals and split pairs with remote connected
■ Pretest–One ended testing for shorts, opens and
split pairs (no remote connected)
■ Test results displayed in wire map format with message
line for shorts and split pairs
■ Displays PASS and sounds beep (optional) for T568A/B
■ Will display wire map for 10Base-T and Token
Ring with remote connected
■ UTP, ScTP, and coax length measurement in feet
or meters using cable capacitance method
■ Coax mapping with up to eight color coded coax remotes
■ Tone generator mode sends four different tones
on all conductors, selected pair or selected pin
■ Auto-on of LinkMaster™ PRO when remote is attached
■ Auto-off in any mode and low power consumption
for long battery life
■ Low Battery symbol indicates when to change battery
■ Black battery cap allows for quick and easy battery change
■ Second jack acts as internal remote and allows patch
cord testing on main tester unit only
■ Will identify if connected to network device during
length test
■ 9 volt battery included in tester
Four Modes of Operation
• Pretest
• Tone
• Length
• Coax
Setup Mode
• To set user
selectable options
• Push Mode to exit
Press SEL to:
• Execute current displayed mode
• Start new test cycle
• Select one of four tones
• Change pair being measured for length
• Change user selectable options
– Beep On/Off
– Unshielded or Shielded Cable
– Units—Feet or Meters
The Tone Mode generates
four different tones on all
pairs, a selected pair, or
selected pin. The tone signal
has constant tone amplitude
over the life of the battery and
two tone amplitude of normal
and half (HI on pair and Low on pin).
Arrow Keys
• To change length constant
(see chart for required parameters)
• To change pair or pin selection
for tone
• To scroll through setup
selectable options
The Length Mode
measures the
length of a cable
by measuring its
capacitance and using
the capacitance per
length (length constant).
Length can be measured with
or without remote attached.
LinkMaster™ PRO Tester
LinkMaster™ PRO Tester Kits
Everything you need to perform all test functions for up to eight remote
mapping locations on twisted pair and coax cable is included in this kit. The
difference between catalog numbers is one kit includes unshielded jumper
cables and the other kit includes shielded jumper cables. Kit includes:
■
■
■
■
■
■
■
Main tester
Eight twisted pair remotes
Eight CATV color coded F-Terminators
Nine jumper cables
RJ-45 to F-connector adapter
RJ-45 to alligator clip cable assembly
Carrying case
Description
Cat. No.
Kit with Unshielded Jumper Cables
Kit with Shielded Jumper Cables
Replacement Large Case only
33-825
33-826
H-3324
LinkMaster™ PRO Economy Kits
Perform all test functions with one remote each for both twisted pair and coax
cable complete in this economy kit with carrying case. The difference between
catalog numbers is one kit includes unshielded jumper cables and the other
kit includes shielded jumper cables. Kit includes:
■
■
■
■
■
■
■
Main tester
One twisted pair remote
Two jumper cables
Brown CATV color coded F-Terminators
RJ-45 to F-connector adapter
Carrying case
RJ-45 to alligator clip cable assembly
Description
Cat. No.
Kit with Unshielded Jumper Cables
Kit with Shielded Jumper Cables
Replacement Small Case only
33-835
33-836
IA-4868
Accessories
F-Terminators
Catalog No. LA-4159
LinkMaster™ PRO Remotes
Catalog No. LA-4158
Complete set of eight CATV color coded F-terminators for
replacements or to expand the economy kit to a full kit.
Security Accessory Kit
Catalog No. LA-4157
For testing individual pairs on sensors, light
controls, and CCTV leads in security applications.
Modular adapter allows for continuous line monitoring
while testing for length and other functions.
Kit includes eight position modular adapter
and a quantity of eight RJ-45 to alligator
clip assemblies.
(8 included)
Replacement remotes two through eight for
replacement or to expand the
economy kit to a full kit.
Additional DataComm Products
MiniTracker™
Tester
LinkMaster™
Tester
Identifies (or maps) different cable end
points and cable runs within a structure by
identifying remote terminator color code.
Tone Mode can be used to send a tone
signal on coaxial cable for tracing.
Tests wiring configurations on
UTP/STP cables. Checks for
shorts, miswires, reversals and
split pairs. Debug feature,
automatic shut-off and low
battery LED indication.
■ Designed specifically for cable TV,
security video, broadcast and
building/home automation
system applications
■ Designed to test installed twisted pair wiring
■ Tests unshielded and shielded modular plugs
■ Main unit and remote allow one person testing
■ Single run/multi-run testing ability
■ Includes 4 F-type terminators
Description
Cat. No.
MiniTracker™ Tester w/4 F-type terminators
62-202
at
s Gre
WorkCAT 5E
on bling
Ca
Description
Cat. No.
LinkMaster™ Tester and Remote
62-200
Cable Service Kits
Tone and Probe Kit
Cat. No. 33-864
Cable Kit
Cat. No.
33-605
The Amplifier Probe and Tone
Generator Kit is designed to
identify and trace wires or
cables within a group without
damaging the insulators.
This handy tote includes
the most popular tools for
terminating and tracing
voice and data connections.
33-864 Kit Includes:
Description
Cat. No.
Amplifier Probe
62-164
Tone Generator
62-160
Lead Set
142.014
Cable Assembly
K-7919
Flat Tip
LA-4144
Soft Black Pouch
62-168
Technician’s Service Kit.
Cat. No. 33-505
Deluxe
Cable Kit
Cat. No.
33-705
Same as 33-605 kit
with the addition of
the LinkMaster™ Tester
and Telemaster™ tool.
Content of Kits 33-605 Cable Service Kit
This handy kit with belt clip provides
all the tools necessary to terminate
voice and data connections.
Qty.
Cat. No.
Punchmaster™ w/110 Blade
1
35-485
66 Blade only
1
35-497
Electrician’s Scissors w/Stripping Notches
1
35-088
UTP/STP Stripper
1
45-165
Description
Cat. No.
5-in-1 Screwdriver
1
35-905
Punchmaster™ II Punchdown Tool w/110 Blade
35-485
Probe Pic & Spudger
1
35-473
Punchmaster™ II 66 Blade only
35-497
Tone Generator
1
62-160
Electrician’s Scissors w/Stripping Notches
35-088
Amplifier Probe
1
62-164
UTP/STP Stripper
45-165
Journeyman’s Electrician’s Tote
1
35-462
Electrician’s Cabinet Tip Screwdriver
35-183
Content of Kits 33-705 Cable Service Kit
Probe Pick and Spudger
35-473
Same contents as 33-605 plus:
Nylon Case
62-205
Telemaster™ Tool
1
30-496
LinkMaster™ Tester and Remote
1
62-200
33-505 Kit Includes:
Form No. P-2228
©2001 IDEAL INDUSTRIES, INC.
IDEAL INDUSTRIES, INC.
Becker Place, Sycamore, IL 60178 – 800-435-0705 in U.S.A.
Ajax, Ontario, L1S 2E1, Canada – 800-527-9105 in Canada
Warrington, Cheshire WA5 5TN, England – 44 1925 444.446
www.idealindustries.com
Rev. 12/01
Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising