Model name Use With:

Model name Use With:
Connectors, Adapters, and Tools
ACCESSORIES
Connectors,Side
adapters,
Text and tools
Model
Name
Use With:
Model
Name
Use With:
213-CON
Analog Output Connector
Instruments with 12-pin analog
connectors
7001-PNL
Metal Plate
7001
237-BAN-3A
Triax to Banana Plug
4200-SCS, 7072, 7072-HV, DMMs
7011-KIT-R
Female 96-pin Connector Kit
7011-C, 7012-C, 7013-C, 7015-C,
7018-C
237-BNC-TRX
3-Lug Female Triax to Male BNC
237, 4200-SCS, 6517A, 6517B,
Connector with guard disconnected 7078-TRX cables
7011-MTR
Bulkhead Mount 96-pin Male
Connector
7011-KIT-R, 7011-C, 7012-C, 7013-C,
7015-C, 7018-C
237-TRX-BAR
3-Lug Triax Female to Female
Barrel Adapter
2635, 2635A, 2636, 2636A, 4200-SCS,
Triax interconnect
237-TRX-NG
Triax Male-Female Adapter with
guard disconnected
237, 6517A, 6517B, 7072, 7072-HV
237-TRX-T
3-slot Male to Dual 3-Lug Female
Triax Tee Adapter
4200-SCS, 7072, 7072-HV,
7078-TRX cables
237-TRX-TBC
3-Lug Female Triax Bulkhead
Connector
7072, 7072-HV, 7078-TRX cables
2182-325A
Silver Solder for use with 2182-KIT
2182A
7072-TRT
2182-KIT
2188
2499-DIGIO
Low-Thermal Connector with Strain
2182A, SC-93
Relief (LEMO)
Low-Thermal Calibration Shorting
2182A
Plug
Digital I/O Expansion Module
7011-ST
Extra Screw Terminal Board
7011-S
7012-ST
Extra Screw Terminal Board
7012-S
7013-ST
Extra Screw Terminal Board
7013-S
7014-ST
Extra Screw Terminal Board
7014
7015-ST
Extra Screw Terminal Board
7015-S
7018-ST
Extra Screw Terminal Board
7018-S
Triax Removal Tool
707B, 708B
7074-CIT
Contact Extraction Tool
7152-KIT, 7152-MTR
7074-HCT
Hand Crimping Tool
7152-KIT, 7152-MTR
7078-CIT
Contact Insertion/Extraction Tool
7078-KIT, 7078-MTR, 7152-KIT,
7152-MTR
7078-HCT
Hand Crimping Tool for 7078-KIT,
7169-KIT
7078-KIT
7078-KIT
Connector Kit
7071, 7071-4, 7074-D, 7078-MTR
7071, 7071-4, 7078-KIT, 7078-MTC
SourceMeter instruments
2500INT-SMA
SMA Connector
2500INT integrating sphere
2500INT-FC/PC
FP/PC Connector
2500INT integrating sphere
2500INT-FC/APC
FP/APC Connector
2500INT integrating sphere
2600-IAC
Safety Interlock Adapter Connector
2611, 2612, 2635, 2636, 2611A, 2612A,
2635A, 2636A
7078-MTR
Mass Terminated Receptacle,
Bulkhead Mount
2600-KIT
Screw Terminal Connector with
Strain Relief and Cover
2601, 2602 (2 needed), 2611, 2612 (2
needed), 2601A, 2602A (2 needed),
2611A, 2612A (2 needed)
7078-TRX-BNC
3-slot Male Triax to BNC Adapter
486, 487, 4210-CVU, 4801, 6514,
6517A, 6517B, 7072, 7072-HV
7078-TRX-GND
2600-TRIAX
3-Lug Triax Adapter
2601, 2602 (2 needed), 2611, 2612 (2
needed), 2601A, 2602A (2 needed),
2611A, 2612A (2 needed)
3-slot Male Triax to BNC Adapter
(guard removed)
237, 4200-SCS, 4801, 6517A, 6517B,
7051, 7072, 7072-HV, Series 2600,
Series 2600A
3706-BKPL
Analog Backplane Extender Board
3706
7078-TRX-TBC
3-Lug Female Triax Bulkhead
Connector w/Cap
7078-TRX cables
7152-HCT
Hand Crimp Tool for 7152-KIT,
7152-MTR
7152-KIT, 7152-MTR
3720-ST
Screw Terminal Block
3720
3721-ST
Screw Terminal Block
3721
3723-ST
Screw Terminal Block
3723
7152-KIT
6-Position M-Series Plug w/Contacts 7152, 7152-MTR
3723-ST-1
Screw Terminal Block
3723
7152-MTR
6-Position M-Series Receptacle
w/Sockets
7152, 7152-KIT, 7152-MTC-2,
7152-MTC-10
7703-306A
DB50 Male Connector Kit
7701, 7703, 7705, 7709
3731
7709-308A
DB25 Male Connector Kit
7701, 7707, 7709
Female SMA to Male N-Type Adapter 7711, 7712
50W Feed-Through Terminator
RG 58 cable, 776, 3390
7788
50-pin D Subconnector Kit
7703, 7705, 77XX, modules with
D sub connectors
7789
50-pin Male and 25-pin Male D-Shell
7701, 7709
Connector Kit
7790
50-pin Male, 50-pin Female,
and 25-pin Male IDC D-Shell
Connector Kit
7701, 7703, 7705, 7707, 7709
8610
Low Thermal Shorting Plug
2000, 2001, 2002, 2010
8620
4-Wire DMM Shorting Plug
2000, 2001, 2002, 2010, 2015, 2016,
Series 2400, Series 2700, Series 3700
8680
RTD Probe Adapter
2001, 2002, 2010
3724-ST
Screw Terminal Block
3724
3730-ST
Screw Terminal Block
3730
3731-ST
Screw Terminal Block
3740-ST
Screw Terminal Block
3740
7712-SMA-N
3750-ST
Screw Terminal Block
3750
7755
3790-KIT50-R
50-pin Female D-sub Connector Kit 3721, 3730, 3731, 3740, 3750
3791-CIT
Contact Insertion and Extraction
Tool
3791-KIT78-R
78-pin Female D-sub Connector Kit 3720, 3723, 3724
3720, 3722, 3723
3792-KIT104-R
104-pin Male D-sub Connector Kit
3792-KIT104-R/F
104-pin Female D-sub Connector Kit 3722
3722
4851
BNC Shorting Plug
Instruments with BNC connectors
6171
3-slot Male to 2-Lug Female Triax
Adapter
2-lug triax connectors
6172
2-slot Male to 3-Lug Female Triax
Adapter
7065, 2500INT
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
BG-18
CAP-18
CAP-31
CS-400
CS-458
CS-565
CS-630
CS-631
CS-701
CS-719
CS-846
CS-970
Name
Use With:
230, Series 2000, Series 2400, 2700,
Dual Banana to BNC Coaxial Adapter
2750
Protective Shield/Cap
BNC, 2-lug triax connectors
Protective Shield/Cap
3-lug triax connectors
DB25 Male Solder Cup
CA-126-1 cable, 213
Interlock Connector Kit
6517-ILC-3
BNC Barrel, 4200-SCS
BNC interconnect
3-Lug Female Triax Bulkhead
6487, 6517A, 6517B
Connector
3-Lug Male Triax Cable Mount
4200-SCS, SC-22 cable
Connector
BNC Tee Adapter (Female-Male4200-SCS
Female)
3-Lug Triax Jack Receptacle
4200-SCS
Screw Terminal Test Lead Connector 230X, 2510, 2510-AT
High Voltage Bulkhead Connector 248, 248-SHV cable
Model 213-CON Analog Output Connector:
Quick disconnect analog output connector for
Model 213 Quad Voltage Source. Screw terminals provided for connection of test leads.
For use with: Instruments with 12-pin analog
connectors
Item shipped may
vary from model
­pictured here.
Model 237-BAN-3A Triax to Banana Plug:
Triax cable center conductor ter­mi­nat­ed in a
safety banana plug (guard and shield open). For
connecting DMMs and other banana jack instruments to a matrix or fixture.
Model
Name
Use With:
CS-1247
SMA Female to BNC Male Adapter
4200-SCS
4200-SCS
CS-1249
SMA Female to SMB Plug Adapter
CS-1251
BNC Female to SMB Plug Adapter
4200-SCS
CS-1252
SMA Male to BNC Female Adapter
4200-SCS
CS-1281
SMA Female to SMA Female Adapter 4200-SCS
CS-1305
Interlock Connector
6517B
CS-1382
Female MMBX Jack to Male SMA
Plug Adapter
4200-SCS
CS-1390
Male LEMO Triax to Female SMA
Adapter
4200-SCS
CS-1391
SMA Tee Adapter (Female-MaleFemale)
4200-SCS
CS-1423-3
Miniature Mating Connector
2635, 2636, 2635A, 2636A
CS-1479
SMA Male to BNC Male Adapter
4200-SCS
TL-24
SMA Torque Wrench
4200-SCS, System 46, System 46T
Model 237-BNC-TRX: Male BNC to 3-lug female
triax adapter (guard dis­con­nect­ed). Terminates
triax cable in BNC plug. High voltage rating for
use with 237 and 7072-HV.
Model 237-TRX-NG: 3-slot triax to 3-lug female
triax adapter (guard removed) for non-guarded
mea­sure­ments. High voltage rating for use with
237, 7072-HV, etc.
For use with: 237, 4200-SCS, 6517A, 6517B,
7078-TRX cables
For use with: 237, 6517A, 6517B, 7072,
7072-HV
Model 237-TRX-BAR: 3-lug triax barrel (female
to female) for use with triax interconnect.
For use with: 2635, 2635A, 2636, 2636A,
4200-SCS, triax interconnect
For use with: 4200-SCS, 7072, 7072-HV,
DMMs
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
Model 237-TRX-T: 3-slot male to dual 3-lug
female triax tee adapter for use with 7078-TRX
cables and 7072/7072-HV Semi­con­duc­­t­or Matrix
Cards. High voltage rating for use with Models
237 SMU and 6517B Electrometer.
For use with: 237, 4200-SCS, 6517A, 6517B,
7072, 7072-HV, 7078-TRX cables
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
ACCESSORIES
Model
Connectors,Side
adapters,
Text and tools
Connectors, Adapters, and Tools
Connectors, Adapters, and Tools
Model 2500INT-FC/
APC: FC/APC connector
for 2500-INT Integrating
Sphere.
Connectors,Side
adapters,
Text and tools
For use with: 2500-INT
Model 237-TRX-TBC: 3-lug female triax bulk­
head connector with cap for assembly of custom
panels and interface connections. High voltage
rating for use with 237, 7072-HV, etc. Uses miniature coax cable, not triax cable, at soldered end.
Bulkhead is outer shield.
For use with: 7072, 7072-HV, 7078-TRX cables
Model 2188 Low-Thermal Calibration
Shorting Plug: A low-resistance, low-­thermal
shorting plug required to calibrate the Model
2182A Nanovoltmeter. Made of a LEMO connector with its pin connectors shorted together
using copper wire and Sn/Ag4 silver solder.
For use with: 2182A
Model 2500INT-FC/
PC: FC/PC connector
for 2500-INT Integrating
Sphere.
For use with: 2500-INT
Model 2500INTSMA: SMA connector
for 2500-INT Integrating
Sphere.
For use with: 2500-INT
Model 2182-325A: Silver solder for making
c­ onnections in experiments with the Model
2182A. 20 ft roll.
For use with: 2182A
Model 2182-KIT Low-Thermal Connector with
Strain Relief: Connector kit for building a custom input cable for the Model 2182A Nano­volt­
meter. Includes a low-thermal (LEMO) connector
and a strain relief.
Model 2499-DIGIO: Digital I/O expansion
­module that plugs onto the DB-9 connector of
a SourceMeter® instrument. Expands the three
digital I/O lines of the SourceMeter to 16 lines.
The SOT, EOT/BUSY, 5V, GND, and Interlock
­signals are passed through.
Model 2600-IAC: Safety interlock adapter
connector.
Services Available: 1-year factory warranty
extended to 3 years from date of shipment
For use with: 2611, 2612, 2635, 2636, 2611A,
2612A, 2635A, 2636A
For use with: SourceMeter Instruments
ACCESSORIES
For use with: 2182A, SC-93
Model 2600-KIT: Extra screw terminal connector, strain relief, and cover for a single
SourceMeter channel (two needed for use with
Models 2602, 2612, 2602A, and 2612A).
For use with: 2601, 2602, 2611, 2612, 2601A,
2602A, 2611A, 2612A
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Model 2600-TRIAX: Triax adapter for a single
Series 2600 or 2600A SourceMeter channel
(two needed for use with Models 2602, 2602A,
2612, and 2612A). For use with standard 3-lug
triax cables.
Model 3721-ST: Screw Terminal Block. Required
with the Model 3721 for automatic CJC thermocouple measurements.
For use with: 2601, 2602, 2611, 2612, 2601A,
2602A, 2611A, 2612A
For use with: 3721
Model 3706-BKPL: Analog backplane extender
board, 15-pin D-sub to terminal block.
Model 3723-ST: Screw Terminal Block.
Accessory for Model 3723 for two-pole
applications.
Model 3724-ST: Screw Terminal Block.
For use with: 3724
Connectors,Side
adapters,
Text and tools
Connectors, Adapters, and Tools
Model 3730-ST: Screw Terminal Block.
For use with: Series 3700
For use with: 3730
For use with: 3723
Model 3731-ST: Screw Terminal Block.
Model 3723-ST-1: Screw Terminal Block.
Accessory for the Model 3723 for single-pole
applications.
For use with: 3720
For use with: 3723
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
ACCESSORIES
For use with: 3731
Model 3720-ST: Screw Terminal Block.
Required with the Model 3720 for automatic CJC
thermocouple measurements.
O F
C O N F I D E N C E
Connectors,Side
adapters,
Text and tools
Connectors, Adapters, and Tools
Model 3732-ST-C: Screw Terminal Block.
Enables screw terminal access and additional
matrix sizes including: quad 4×28 (1W), dual
4×28 (2W), single 4×56 (2W), dual 4×56 (1W),
and single 4×112 (1W).
Model 3791-KIT78-R: 78-pin female D-sub
connector kit that contains two female D-sub
connectors and 156 solder-cup contacts. Use for
assembly of custom cable and harnesses compatible with Series 3700 plug-in cards.
Model 3750-ST: Screw Terminal Block.
For use with: 3750
For use with: 3720, 3723, 3724
For use with: 3732
Model 3790-KIT50-R: 50-pin female D-sub
connector kit that contains two female D-sub
connectors and 100 solder cup contacts. Use for
assembly of custom cable and harnesses compatible with Series 3700 plug-in cards.
Model 3732-ST-R: Screw Terminal Block.
Enables screw terminal access and additional
matrix sizes including: dual 8×28 (1W), single
8×28 (2W), and single 16×28 (1W).
For use with: 3721, 3730, 3731, 3740, 3750
Model 3792-KIT104-R: 104-pin male D-sub connector kit that contains two male D-sub connectors with housings and 208 solder-cup contacts.
Use for assembly of custom cable and harnesses
compatible with Series 3700 plug-in cards.
For use with: 3722
For use with: 3732
ACCESSORIES
Model 3791-CIT: Contact insertion and extraction tool for assembly and maintenance of Series
3700 D-sub Connector kits.
For use with: 3791-KIT78-R, 3791-KIT104-R
Model 3792-KIT104-R/F: 104-pin female D-sub
connector kit that contains two female D-sub
connectors with housings and 208 solder-cup
contacts. Use for assembly of custom cables, harnesses, and DUT interface compatible with Series
3700 plug-in cards.
Model 3740-ST: Screw Terminal Block.
For use with: 3740
For use with: 3722
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Connectors, Adapters, and Tools
For use with instruments with BNC
connectors
Model 7012-ST: Extra quick disconnect screw
terminal board. One 7012-ST is included with
each 7012-S.
Model 7011-KIT-R: 96-pin female DIN con­nec­
tor with solder eyelets and strain relief. This
kit can be used for assembly of custom cables
to connect with the con­nec­tors on the 7011-C,
7012-C, 7013-C, 7015-C, and 7018-C switch
cards. Also con­nects with the 7011-MTR bulkhead mount male connector.
For use with: 7012-S
For use with: 7011-C, 7012-C, 7013-C, 7015-C,
7018-C
Model 6171: 3-slot male to 2-lug female triax
adapter.
Connectors,Side
adapters,
Text and tools
Model 4851: BNC shorting plug.
Model 7013-ST: Extra quick disconnect screw
terminal board. One 7013-ST is included with
each 7013-S.
For use with: 2-lug triax connectors
For use with: 7013-S
Model 7011-MTR: 96-pin male DIN connector
with solder eyelets for bulkhead mount. Con­
nects with the 7011-KIT-R and the 7011-MTC-2.
Model 6172: 2-slot male to 3-lug female triax
adapter. For use in adapting Models 7065 and
250INT inputs to 3-slot triax plugs.
For use with: 7011-KIT-R, 7011-C, 7012-C,
7013-C, 7015-C, 7018-C
For use with: 7065, 2500INT
Model 7014-ST: Extra quick disconnect iso­ther­
mal screw terminal board with cold junction
sensor. One 7014-ST is included with each 7014.
Model 7001-PNL: Metal plate used to cover
an empty card slot on the rear panel of a
Model 7001.
ACCESSORIES
For use with: 7014
Model 7011-ST: Extra quick disconnect screw
terminal board. One 7011-ST is included with
each 7011-S.
For use with: 7011-S
For use with: 7001
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Connectors,Side
adapters,
Text and tools
Connectors, Adapters, and Tools
Model 7015-ST: Extra quick disconnect screw
terminal board. One 7015-ST is included with
each 7015-S.
For use with: 7015-S
Model 7018-ST: Extra quick disconnect screw
terminal board. One 7018-ST is included with
each 7018-S.
For use with: 7018-S
Model 7074-CIT: Contact extraction tool for
removal of contacts from cables and con­nec­tors.
For use with: 7152-KIT, 7152-MTR
Model 7078-HCT: Contact crimping pliers
for as­sem­bly of cables and connectors using
7078-MTR or 7078-KIT.
For use with: 7078-KIT
Model 7074-HCT: Contact crimping pliers
for as­sem­bly of cables and con­nec­tors.
For use with: 7152-KIT, 7152-MTR
Model 7078-KIT: 38-pin male plug assembly
with strain relief and 40 con­tacts for assembly
of custom cable and harnesses compatible with
Model 7071 8×12 Matrix Card, Model ­­7071-­4
Dual 4×12 Matrix Card, and 7078-MTR Mass Ter­
mi­nat­ed Receptacle. Re­quires 7078-HCT; recom­
mend 7078-CIT.
For use with: 7071, 7071-4, 7074-D, 7078-MTR
Model 7072-TRT: Triax removal tool used to
connect or disconnect triax style connectors
when clearance is limited making it difficult to
mate or unmate a connector with your fingers.
For use with: 707B, 708B
Model 7078-CIT: Contact insertion and ex­trac­
tion tool for assembly and main­te­nance of
7078-MTC cables and connec­tors.
ACCESSORIES
For use with: 7078-KIT, 7078-MTR, 7152-KIT,
7152-MTR
Model 7078-MTR: 38-pin female bulkhead
mount re­cep­ta­cle with 40 contacts for custom
interface and patch panels compatible with
7078-MTC and 7078-KIT. Requires 7078-HCT;
recommend 7078-CIT.
For use with: 7078-KIT, 7078-MTC, 7071,
7071-4
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Model 7078-TRX-BNC: 3-slot male triax to BNC
adapter for use with 7072 Semi­con­duc­tor Matrix
Card and 4801 cables.
For use with: 486, 487, 4210-CVU, 4687, 4801,
6514, 6517A, 6517B, 7072, 7072-HV
Model 7152-HCT: Contact crimping pliers for
as­sem­bly of cables and con­nec­tor using
7152-MTR or 7152-KIT.
For use with: 7152-KIT, 7152-MTR
Model 7703-306A: DB50 male connector kit
(solder cup) with shell.
For use with: 7701, 7703, 7705, 7709
Model 7078-TRX-GND: 3-slot male triax to
female BNC adapter (guard removed) for adapting non-guarded measurements to the Model
237 SMU, 7072 or 7072-HV Semi­con­duc­tor
Matrix Cards, or 8006 or 8008 Test Fixtures.
For use with: 237, Series 2600, Series 2600A,
4801, 6517A, 6517B, 7051, 7072, 7072-HV
Model 7152-KIT: 6-pin plug assembly with
strain relief and contacts for assembly of custom
cable and harnesses compatible with Model 7152
4×5 Low Current Matrix Card and 7152-MTR
Mass Ter­mi­nat­ed Re­cept­acle. Requires 7152-HCT
recommend 7074-CIT and 7074-HCT.
For use with: 7152, 7152-MTR
Connectors,Side
adapters,
Text and tools
Connectors, Adapters, and Tools
Model 7709-308A: DB25 male connector kit
­(solder cup) with shell.
Model 7078-TRX-TBC: 3-lug female triax bulkhead connector with cap for assembly of custom
panels and in­ter­face connections.
For use with: 7078-TRX Cables
Model 7152-MTR: 6-pin bulkhead mount
re­cep­ta­cle with contacts for custom in­ter­face
and patch panels com­pat­i­­ble with 7152-MTC
and 7152-KIT. Re­quires 7152 HCT; re­commend
7074-CIT and 7074-HCT.
Model 7712-SMA-N: Female SMA to male
N-type adapter.
For use with: 7711, 7712
For use with: 7152, 7152-KIT, 7152-MTC-2,
7152-MTC-10
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
ACCESSORIES
For use with: 7701, 7707, 7709
Connectors,Side
adapters,
Text and tools
Connectors, Adapters, and Tools
Model 7755 50W Feed-Through Ter­mi­na­tor:
BNC-to-BNC adapter for ter­mi­nat­ing RG58 cable
in its characteristic impedance. VSWR <1.1,
DC–250MHz.
For use with: RG58 Cable, 776, 3390
Model 7790: 50 pin male, 50 pin female, 25 pin
male IDC D-Shell Connector Kit (one each).
For use with: 7701, 7703, 7705, 7707, or 7709
Integra modules
Model 8680 RTD Probe Adapter: Provides a
means of connecting RTD probes terminated in
either a 4-wire in­stru­men­ta­tion connector or bare
wires to safety input jacks on a 0.5 inch spacing.
Use with Models 8681, 8693, 8695, or 8696.
For use with: 2001, 2002, 2010
Model 7788: 50-pin D subminiature connector
kit. To mate with 50-pin connector on Model
7703 and 7705.
Model 8610 Low Thermal Shorting Plug: For
cal­i­bra­tion lab use, this plug provides a very low
thermal offset short at front or rear inputs.
For use with: 2000, 2001, 2002, 2010
For use with: 7703, 7705, 77XX modules with
D sub connectors
BG-18: Dual banana to BNC coaxial adapter for
adapting connection on instrument with dual
banana jack.
ACCESSORIES
For use with: 230, Series 2000, Series 2400,
2700, 2750
Model 8620 Four-Wire DMM Shorting Plug:
Provides a low resistance 4-wire short to both
observe and cancel DMM offset resistances and
voltages to improve measurement accuracies.
Model 7789: 50-pin/25-pin (both male) D-Shell
Kit (one of each) for 7701 or 7709 Integra modules (mating connectors are supplied with these
modules when purchased).
For use with: 2000, 2001, 2002, 2010, 2015,
2016, Series 2400, Series 2700, Series 3700
CAP-18: Protective shield/cap for BNC
­connectors.
For use with: BNC connectors
For use with: 7701, 7709
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
CAP-31: Protective shield/cap for 3-lug triax
­connectors.
For use with: 3-lug triax connectors
CS-630: 3-lug female triax bulkhead connector
for soldered connection. Mates with CS-631.
For use with: Fixtures, 6487, 6517A, 6517B
CS-719: 3-lug triax jack receptacle.
For use with: 4200-SCS
CS-400: DB25 male solder cup.
Connectors,Side
adapters,
Text and tools
Connectors, Adapters, and Tools
For use with: C126-1 cable, 213
CS-631: 3-slot male triax cable mount con­nec­tor
for use with SC-22 cable. Mates to Models 237,
486, 487, 7072, and 8006.
CS-846: Eight position connector with screw
terminals for connection to test leads.
For use with: 4200-SCS, SC-22 cable
For use with: 230X, 2510, 2510-AT
CS-458: Interlock connector kit to mate with
6517-ILC-3.
For use with: 6517-ILC-3
CS-701: BNC tee adapter (female, male, female).
For use with: 248, 248-SHV cable
ACCESSORIES
For use with: 4200-SCS
CS-970: High voltage bulkhead connector.
CS-565: Female BNC to female BNC adapter
with 50W nominal impedance.
For use with: 4200-SCS, BNC in­tercon­nect
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Connectors,Side
adapters,
Text and tools
Connectors, Adapters, and Tools
CS-1247: SMA female to BNC male adapter
For use with: 4200-SCS
CS-1281: SMA female to SMA female adapter
For use with: 4200-SCS
CS-1391: SMA tee adapter (female-male-female)
For use with: 4200-SCS
CS-1249: SMA female to SMB plug adapter
For use with: 4200-SCS
CS-1305: Interlock connector to mate with
Model 6517B.
For use with: 6517B
CS-1423-3: Miniature mating connector used as
a ground connector for the Models 2635, 2635A,
2636, and 2636A.
For use with: 2635, 2636, 2635A, 2636A
CS-1251: BNC female to SMB plug adapter
For use with: 4200-SCS
CS-1382: Female MMBX jack to male SMA plug
adapter with 50W impedance and 6GHz maximum frequency
For use with: 4200-SCS
CS-1479: SMA male to BNC male adapter
For use with: 4200-SCS
ACCESSORIES
CS-1252: SMA male to BNC female adapter
For use with: 4200-SCS
CS-1390: Male LEMO triax to female SMA
adapter
For use with: 4200-SCS
TL-24: SMA torque wrench
For use with: 4200-SCS, System 46, System 46T
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement