PowerVerter APS X 1250W 12VDC 230V Inverter/Charger with Auto-Transfer Switching, 2-C13 Outlets

Add to my manuals
4 Pages

advertisement

PowerVerter APS X 1250W 12VDC 230V Inverter/Charger with Auto-Transfer Switching, 2-C13 Outlets | Manualzz

PowerVerter APS X 1250W 12VDC 230V

Inverter/Charger with Auto-Transfer Switching,

2-C13 Outlets

MODEL NUMBER: APSX1250

Highlights

12V DC or 230V AC input; 230V,

50 Hz output; 2 AC outlets

1250 watts continuous, 1875 watts OverPower and 2500 watts

DoubleBoost inverter output (see specifications)

3 stage, selectable 7.5 / 30 amp wet/dry cell battery charger with

1/2 cycle transfer time

Auto Transfer Switching option for battery backup / UPS operation

Reliability enhanced large-transformer design with protected DC terminals

Applications

Versatile inverter/charger system

Description

Tripp Lite's APSX1250 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 1250 watts of continuous 230V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for up to 1-60 minutes and

DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, selectable 7.5/30 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information

(APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages. with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion vans, marine environments and fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and as an uninterruptible power supply

(UPS) for items compatible with a

10 millisecond transfer time.

NOTE: For sump pump applications, Tripp Lite recommends its "UT" Utility Truck

Inverter/Chargers.

Package Includes

APSX1250 Inverter/Charger

Instruction manual with warranty information

Features

Supports 230V AC output from a 230V AC line power source or 12V DC battery source

10 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a 1/2 cycle transfer time

Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart)

1 / 4

OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions

3 stage, selectable 7.5/30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging

Dual C13 output receptacles pass 120V line power or inverter output through to connected equipment

3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge

Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status

Set of 4 configuration dipswitches support wet/gel battery charging profiles, charger enable/inhibit, and selectable 144/163/182/201V AC low voltage auto transfer during brownouts

Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings

Resettable 5A charger AC input breaker and resettable 6A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures

Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop

Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory)

Specifications

OVERVIEW

Style Heavy-duty with built-in battery charger

OUTPUT

Frequency Compatibility 50 Hz

(2) Universal outlets Output Receptacles

Output (Watts) 1250

Continuous Output Capacity (Watts) 1250

Peak Output Capacity (Watts)

Output Nominal Voltage

2500

230V

Output Voltage Regulation

Output Frequency Regulation

Overload Protection

LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC):

Maintains PWM sine wave output voltage of 230 VAC (+/-5%).

50 Hz (+/- 0.3 Hz)

Includes 5A input breaker dedicated to the charging system and 6A output breaker for AC output loads

INPUT

Nominal Input Voltage(s) Supported 230V AC

Recommended Electrical Service

Maximum Input Amps / Watts

DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC

INPUT: 230VAC

DC INPUT: Full continuous load - 125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load

(3.3A max charger-only / combined input load to support charger and AC output is automatically controllable to

66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)

2 / 4

Input Connection Type

Voltage Compatibility (VAC)

Voltage Compatibility (VDC)

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection

230

12

BATTERY

Expandable Battery Runtime

DC System Voltage (VDC)

Battery Pack Accessory (Optional)

Battery Charge

Runtime is expandable with any number of user supplied wet or gel type batteries

12

98-121 sealed lead acid battery (optional)

Selectable 7.5 / 30 amp with 1/2 cycle transfer time

LEDS ALARMS & SWITCHES

Switches

Front Panel LEDs

3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.

Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

SURGE / NOISE SUPPRESSION

AC Suppression Joule Rating 840

PHYSICAL

Shipping Dimensions (hwd / in.)

Shipping Dimensions (hwd / cm)

Shipping Weight (lbs.)

Shipping Weight (kg)

Unit Dimensions (hwd / in.)

Unit Dimensions (hwd / cm)

Unit Weight (lbs.)

Unit Weight (kg)

Cooling Method

Material of Construction

Form Factors Supported

12.5 x 11 x 10.75

31.75 x 27.94 x 27.31

26

11.8

7 x 8.75 x 9

17.78 x 22.23 x 22.86

24

10.9

Multi-speed fan

Polycarbonate

Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional mounting information)

ENVIRONMENTAL

Relative Humidity

LINE / BATTERY TRANSFER

0-95% non-condensing

3 / 4

Transfer Time (Line Power to

Battery Mode)

Low Voltage Transfer to Battery

Power

High Voltage Transfer to Battery

Power

10 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)

In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163,

182, 201V - see manual)

In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272

SPECIAL FEATURES

Remote Control Capability Yes

WARRANTY

Product Warranty Period (U.S. &

Canada)

Product Warranty Period

(International)

Product Warranty Period (Mexico)

Product Warranty Period (Puerto

Rico)

1-year limited warranty

2-year limited warranty

2-year limited warranty

1-year limited warranty

© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.

Specifications are subject to change without notice. Photos may differ slightly from final products.

4 / 4

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement