TWIST-LOCK and HUBBELLOCK Devices

TWIST-LOCK and HUBBELLOCK Devices
TWIST-LOCK® and
HUBBELLOCK® Devices
Index
Rating
15A 125V
15A 125V
20A 250V
Features and Benefits
15A 125V
Features and Benefits
15A 125V, 250V and 277V AC
Features and Benefits
Features and Benefits
Features and Benefits
Features and Benefits
Features and Benefits
Compatibility Chart
20A 125V, 250V and 277V AC
20A 125V, 250V and 277V AC
20A 347V, 480V AC and 600V AC
30A 125V, 250V and 277V AC
30A 125V, and 250V
30A 480V AC and 600V AC
50A 125V, 250V and 480V AC
50A 250V DC and 600V AC
15A 125/250V
20 and 30A 125/250V
20A 125/250V, 3Ø 250V AC
and 3Ø 480V AC
30A 125/250V and 3Ø 250V AC
30A 3Ø 480V AC and 3Ø 600V AC
50A 125/250V, 3Ø 250V AC,
and 3Ø 480V AC
50A 600V AC, 250V DC
20A 3Ø Y 120/208V AC,
277/480V AC and 347/600V AC
30A 3Ø Y 120/208V AC,
277/480V AC and 347/600V AC
20A and 30A 3Ø Y 120/208V AC
20A 3Ø Y 120/208V AC,
277/480V AC and 347/600V AC
30A 3Ø Y 120/208V AC,
277/480V AC and 347/600V AC
20A 250V, 10A 600V AC
30A 250V, 600V AC and
20A 3Ø Y 120/208V AC 400 Hz
10A, 15A, 20A, and 30A 125V and 250V
Dimensions in Inches (mm)
3P 4W, Twist-Lock Grounding Devices
3P 4W, Twist-Lock Grounding Devices
3P 4W, Twist-Lock Grounding Devices
B-40–42
B-43–45
B-46
3P 4W, Twist-Lock Grounding Devices
4P 4W, Twist-Lock Non-Grounding Devices
B-47
B-48
4P 4W, Twist-Lock Non-Grounding Devices
B-49
4P 4W, Twist-Lock Non-NEMA, Non-Grounding Devices
4P 5W, Twist-Lock Grounding Devices
B-50
B-51–53
4P 5W, Twist-Lock Grounding Device
B-54–56
4P 5W, Twist-Lock Non-NEMA, Grounding Devices
4P 5W, Variload® Twist-Lock Grounding Devices
B-57
B-58
Non-NEMA, Not UL Listed Devices
Switched Twist-Lock and Hubbellock Enclosures
Switched Safety-Shroud Twist-Lock Enclosure
Accessories
Back Boxes for Watertight Receptacles
Add-A-Shroud
50 Amp Twist-Lock Accessories
Hubbellock Devices
2P 3W, Hubbellock Grounding Devices
3P 4W, Hubbellock Grounding Devices
3P 4W, Hubbellock Grounding Devices
3P 4W, Hubbellock Grounding Devices
4P 5W, Hubbellock Grounding Devices
4P 5W, Hubbellock Grounding Devices
2P 3W, Hubbellock Grounding Not UL Listed Devices
B-59–61
B-62–63
B-64–65
B-66–71
B-72
B-73
B-74
B-75
B-76
B-77
B-78
B-79
B-80
B-81
B-82
Technical Information
B-83–88
www.hubbell-wiring.com
Index
Features and Benefits
20A 125V
30A 600V AC, 20A 250V DC
30A 480V AC
60A 600V AC
30A 600V AC, 20A 250V DC
60A 600V AC
20A 125V AC or DC or 10A 250V DC
and 480V AC
Type
Page Number
2P 2W, Midget Twist-Lock Non-Grounding Devices
B-2
2P 2W, Twist-Lock Non-Grounding Devices
B-3
2P 2W, Twist-Lock Non-Grounding Devices
B-4
Midget Twist-Lock Devices
B-5
2P 3W, Midget Twist-Lock Grounding Devices
B-6–7
15A Twist-Lock Devices
B-9
2P 3W, Twist-Lock Grounding Devices
B-10–12
20A and 30A Twist-Lock Devices
B-14–15
50A Twist-Lock Devices
B-16
20A and 30A Watertight Safety-Shroud Twist-Lock Devices
B-17–18
20A and 30A Safety-Shroud Twist-Lock Devices
B-19
CIRCUIT-LOCK Unfused Safety-Shroud Mechanical Interlock
B-20
Twist-Lock Devices
B-21
2P 3W, Twist-Lock Grounding Devices
B-22–24
2P 3W, Valise® Twist-Lock Grounding Devices
B-25
2P 3W, Twist-Lock Grounding Devices
B-26
2P 3W, Twist-Lock Grounding Devices
B-27–29
2P 3W, Valise Twist-Lock Grounding Devices
B-30
2P 3W, Twist-Lock Grounding Devices
B-31
2P 3W, Twist-Lock Grounding Devices
B-32
2P 3W, Twist-Lock Grounding Devices
B-33
3P 3W, Midget Twist-Lock Non-Grounding Devices
B-34–35
3P 3W, Twist-Lock Non-Grounding Devices
B-36
3P 4W, Twist-Lock Grounding Devices
B-37–39
Locking Devices
Section B
Locking Devices
TWIST-LOCK® Devices
2 Pole, 2 Wire, Non-Grounding
15 Ampere, 125 Volts
Midget TWIST-LOCK Flanged Receptacle, Plug,
Connector Body and Flanged Inlet
W
W
NEMA ML-1R
15A 125V
NEMA ML-1P
15A 125V
1.63"
(41.4)
1.38"
(35.1)
Flanged Receptacle
.16"
(4.1)
DIA.
.78"
(19.8)
1.03"
(26.2)
Description
Stainless steel flange, exposed terminals.
–
Male Plug
HBL7468
IP20
1.06"
(26.9)
Connector Body
Cord Dia.
.220”-.385”
(5.6-9.8)
IP20
1.77"
(45.0)
Catalog Number
–
HBL7465V
SUITABILITY
Description
Valise connector body, black nylon,
polarized.
HBL7465V
HBL7468
SUITABILITY
Description
Valise® plug, black nylon.
1.25"
(31.8)
Catalog Number
Cord Dia.
.220”-.385”
(5.6-9.8)
Catalog Number
HBL7464V
–
Flanged Inlets
1.06"
(26.9)
.97"
(24.6)
HBL7464V
Description
Stainless steel flange, polarized,
exposed terminals.
Stainless steel flange, not polarized,
exposed terminals.
Catalog Numbers
–
HBL7467
–
HBL7466
Weatherproofing Accessories
1.63"
(41.4)
1.38"
(35.1)
.16"
(4.1)
DIA.
.94"
(23.9)
1.06"
(26.9)
HBL7466, HBL7467
Description
Catalog Numbers
Seal-tite® cover, black elastomer, for use with a HBL7465V when HBL7490V**
*
used with a HBL7464V connector body or a HBL7464V connector
when used with a flanged inlet.
Seal-tite cover, black elastomer, for use with a HBL7464V connector HBL7459V**
*
body and combination of HBL7465V plug and HBL7490V cover.
Closure cover for use with HBL7466 or HBL7467.
HBL4890
*
Bead chain is nickel-plated.
**
IP55
suitability when installed and used properly with plug and connector
body
combinations.
* Not UL Listed.
2P 2W, 15A, 125V
HBL4890
HBL7459V
B-2
HBL7490V
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
2 Pole, 2 Wire Non-Grounding
15 Ampere, 125 Volts
Receptacles, INSULGRIP® Plug, Connector Body,
Flanged Inlet and Flanged Receptacles
1.00"
(25.4)
Receptacles
Description
Duplex, flush, black phenolic.
Single, flush, black phenolic.
Single, panel mount, 115 /16” (49.2)
centers, black phenolic.
W
W
NEMA L1-15R
15A 125V
UL Listed
0.5 HP
NEMA L1-15P
15A 125V
UL Listed
0.5 HP
3.28"
(83.3)
#6-32
TAP
1.53"
(38.8)
Catalog Numbers
HBL7540
–
HBL7535
–
HBL7498
–
2.75"
(69.9)
1.11"
(28.2)
1.19"
(30.2)
1.33"
(33.8)
HBL7540
Insulgrip Plug
IP20
SUITABILITY
Description
Black and white nylon, polarized.
Multiple drive screws.
Insulgrip Connector Body
Cord Dia.
.230”-.720”
(5.8-18.3)
Catalog Number
–
HBL7545C
1.00"
(25.4)
1.63"
(41.4)
3.28" 2.38" 1.39"
(83.3) (60.5) (35.3)
IP20
Description
Black and white nylon.
Multiple drive screws.
SUITABILITY
Cord Dia.
.230”-.720”
(5.8-18.3)
#6-32 TAP
Catalog Number
HBL7506C
–
1.19"
(30.2)
HBL7535
Insulgrip Flanged Inlet
Description
Nylon casing, polarized, backwired,
Multiple drive screws.
Catalog Number
–
HBL7524C
1.00"
(25.4)
#8-32TAP
1.94" 1.39"
(49.3) (35.3)
1.63"
(41.4)
Flanged Receptacles
Description
Insulgrip nylon casing, backwired.
Multiple drive screws.
Metal flange, stainless steel casing,
black phenolic, exposed terminals.
Catalog Numbers
HBL7526C
–
1.39"
(35.3)
1.19"
(30.2)
HBL7498
HBL7526
–
Notes: Only receptacles and plugs are HP rated.
HP ratings are AC only.
See pages B-66 and B-67 for accessories.
1.53"
(38.9)
1.91"
(48.5)
2.19"
(55.6)
2.56"
(65.0)
2.19"
(55.6)
HBL7545C
2.56"
(65.0)
2.78"
(70.6)
.16"
(4.1)
DIA.
1.69"
(42.9)
1.53"
(38.9)
1.72"
(43.7)
1.72"
(43.7)
HBL7524C
Dimensions in Inches (mm)
2P 2W, 15A, 125V
1.69"
(42.9)
.16"
(4.1)
DIA.
www.hubbell-wiring.com
1.41"
(35.8)
HBL7506C
B-3
Locking Devices
TWIST-LOCK® Devices
2 Pole, 2 Wire Non-Grounding
20 Ampere, 250 Volts
Receptacles, INSULGRIP® Plug, Connector Body
Flanged Inlet, Flanged Receptacles
1.30" 1.41"
(33.0) (35.8)
NEMA L2-20R
20A 250V
UL Listed
2 HP
Receptacles
1.39" 2.38" 3.28"
(35.3) (60.5) (83.3)
2.09"
(53.1)
1.11"
(28.2)
#6-32 TAP
Description
Single, black phenolic.
Single, mounted on 4” (101.6)
round box cover, black phenolic.
NEMA L2-20P
20A 250V
UL Listed
2 HP
Catalog Numbers
HBL7210B
HBL7217B
–
–
HBL7210B
Insulgrip Plug
1.53"
(38.9)
Cord Dia.
.220”-.720”
(5.6-18.3)
Catalog Number
–
HBL7102C
Cord Dia.
.220”-.720”
(5.6-18.3)
Catalog Number
HBL7101C
Insulgrip Connector Body
1.91"
(48.5)
Description
Black and white nylon.
Multiple drive screws.
HBL7102C
2.78"
(70.6)
1.41"
(35.8)
1.53"
(38.9)
2.56"
(65.0)
2.19"
(55.6)
–
Insulgrip Flanged Inlet
Description
Nylon casing, back wired, polarized.
Multiple drive screws.
HBL7101C
.16"
(4.1)
DIA.
Description
Black and white nylon, polarized.
Multiple drive screws.
Catalog Number
–
HBL8815C
Flanged Receptacles
1.72"
(43.7)
1.69"
(42.9)
Description
Insulgrip nylon casing, back wired.
Multiple drive screws.
Metal flange, stainless steel casing,
black phenolic, exposed terminals.
Catalog Numbers
HBL8809C
–
HBL3226
–
Notes: Only receptacles and plugs are HP rated.
Horsepower ratings listed above are AC only.
See pages B-66 and B-67 for accessories.
HBL8815C
2.56"
(65.0)
2.19"
(55.6)
.16"
(4.1)
DIA.
1.72"
(43.7)
2P 2W, 20A, 250V
1.69"
(42.9)
HBL8809C
1.88"
(47.8)
.16"(4.1)
DIA.
1.83"
(46.4)
1.42"
(36.1)
HBL3226
B-4
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
Midget TWIST-LOCK Devices
Totally insulated body adds extra measure of safety.
Abuse resistant nylon housing.
Assembly screws have
multiple drive heads for
screwdriver versatility. Only
two assembly screws are
needed to close this device,
make the wire terminations
and retain the cord.
Patented locking lugs interlock the two sections
together when the device is assembled providing a
secure assembly in abusive environment.
Nylon webs join two sections together which makes
assembly of the device quick and easy.
The insulation displacement terminal reduces the
time required for wire preparation and provides
uniformity in the quality of termination.
Powerful, cord-gripping jaws
designed to eliminate conductor slip
and strain on terminals.
Hubbell’s Valise® insulation displacement terminal for
Midget Twist-Lock plugs and connector bodies are the
right choice for economy, wiring speed and long life.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-5
Features and Benefits
“TURN & PULL” marking is highly
visible, reducing possible damages
to equipment by attempting
disconnection prior to unlocking.
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
15 Ampere, 125 Volts
Midget TWIST-LOCK® Devices
W
2.06"
(52.3)
1.75"
(44.5)
1.00"
(25.4)
.15"
(3.8)
DIA.
1.14"
(29.0)
HBL7596N
2.06"
(52.3)
1.75"
(44.5)
GR
NEMA ML-2R
15A 125V
Flanged Receptacles
Description
Exposed terminals, black nylon flange.
Exposed terminals, stainless steel flange.
Covered terminals, stainless steel flange,
accepts cord .500” (12.7) in dia.
NEMA ML-2P
15A 125V
Catalog Numbers
HBL7596N
–
HBL7596
–
HBL7598
–
Male Plugs IP20 SUITABILITY
.16"
(4.1)
DIA.
.97"
(24.6)
1.17"
(29.7)
HBL7596
2.06"
(52.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
W
GR
Description
Valise® male plug, black nylon, insulation
displacement terminals.
Black nylon cover, phenolic body,
multiple drive screw terminals.
Angle plug, black nylon cover, phenolic
body, multiple drive screw terminals.
Cord Dia.
.300”-.430”
(7.6-10.9)
.281”-.421”
(7.1-10.7)
.335”-.421”
(8.5-10.7)
Catalog Numbers
–
HBL7594V
–
HBL7594
–
HBL7570
Weatherproof Accessory IP55** SUITABILITY
Description
Seal-Tite® cover, black elastomer, for use with a HBL7594V plug
when used with a HBL7593V connector body or a HBL7593V
connector body when used with a flanged inlet.
Catalog Number
HBL7495V**
*
Notes: These devices are not interchangeable with any other devices in this catalog.
All male ground pins are sleeves and female device grounds are split pin.
**IP55 Suitability when installed and used properly with plug and connector
body combination.
* Not UL Listed.
1.25"
(31.8)
1.17"
(29.7)
HBL7598
1.61"
(40.9)
1.19"
(30.2)
HBL7594V
2.00"
(50.8)
1.69"
(42.9)
1.59"
(40.4)
2P 3W, 15A, 125V
.86"
(21.8)
1.17"
(29.7)
1.13"
(28.7)
1.17"
(29.7)
HBL7594
B-6
HBL7495V
HBL7570
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
15 Ampere, 125 Volts
Midget TWIST-LOCK® Devices
W
W
GR
Connector Bodies
NEMA ML-2R
15A 125V
IP20 SUITABILITY
Description
Valise® connector body, black nylon,
insulation displacement terminals.
Black nylon cover, phenolic body,
screw terminals.
Angle connector body, black nylon cover,
phenolic body, screw terminals.
Cord Dia.
.300”-.430”
(7.6-10.9)
.281”-.421”
(7.1-10.7)
.335”-.421”
(8.5-10.7)
1.98"
(50.4)
GR
NEMA ML-2P
15A 125V
1.19"
(30.2)
Catalog Numbers
HBL7593V
–
HBL7593
–
HBL7571
–
HBL7593V
2.42"
(61.5)
Flanged Inlets
Description
Exposed terminals, black nylon flange.
Exposed terminals, stainless steel flange.
Covered terminals, stainless steel flange,
accepts cord .500” (12.7) dia.
Weatherproof Accessories
1.13"
(28.7)
Catalog Numbers
–
HBL7595N
–
HBL7595
–
HBL7551
HBL7593
1.69"
(42.9)
IP55** SUITABILITY
Description
Seal-Tite® cover, black elastomer, for use with a HBL7593V
connector body and a combination of HBL7594V plug and
HBL7495V cover.
Closure cover for use with HBL7595 or HBL7595N.
1.17"
(29.7)
Catalog Numbers
HBL7440V**
*
1.28"
(32.5)
HBL4889
*
Notes: These devices are not interchangeable with any other devices in this catalog.
All male ground pins are sleeves and female device grounds are split pin.
**IP55 Suitability when installed and used properly with plug cover and
connector body combination.
* Not UL Listed.
1.17"
(29.7)
HBL7571
2.06"
(52.3)
1.75"
(44.5)
.15"
(3.8)
DIA.
1.00"
(25.4)
1.28"
(32.5)
HBL7595N
2P 3W, 15A, 125V
2.06"
(52.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
1.00"
(25.4)
HBL7440V
Dimensions in Inches (mm)
1.22"
(31.0)
HBL4889
www.hubbell-wiring.com
HBL7595
B-7
Locking Devices
TWIST-LOCK® Devices
Locking Devices
TWIST-LOCK® Devices
INSULGRIP® 15 Ampere Plugs and Connector Bodies
Featuring Integral VARI-SIZE® Cord Grip
Individually molded face for
each blade configuration keeps
debris out of plug interior.
Roomy wiring chamber provides
ample space for wiring.
Individual wiring terminals are
completely enclosed in their
own separate chambers.
Powerful, offsetting cord grips clamp
on individual conductors and outer cord
jacket to prevent strain on terminals.
Ribbed nylon housing is impact
and chemical resistant.
Beveled housing prevents snagging
when dragged across uneven surfaces.
Multiple drive screw heads provide
screwdriver versatility. Pocketed
recess for cord grip screws deters
slippage of the screwdriver.
VARI-SIZE pointer set to “smaller than
gauge” position. Cord diameter range
is .230”-.360” (5.8-9.0). Accepts
slotted and Phillips head drivers.
Transparent angled wiring entrance
holes permit “straight in” conductor
insertion.
Catalog number is visible on the
device while in use for easy
identification.
Powerful offsetting cord grips clamp
on individual conductors and outer
cord jacket to prevent strain on
terminations.
www.hubbell-wiring.com
B-9
Features and Benefits
Dimensions in Inches (mm)
Integral VARI-SIZE® insert adjusts to a
wide range of cord sizes: .230”-.720”
(5.8-18.3).
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
15 Ampere, 125, 250 Volts and 277 Volts AC
Duplex and Single Receptacles
G
1.70"
(43.2)
W
X
G
W
G
Y
3.28"
(83.3)
2.735"
(69.5)
Duplex Receptacles,
Back and Side Wired
NEMA L5-15R
15A 125V
UL/CSA
0.5 HP
Description
Flush, brown RTP face.
Flush, ivory RTP face.
Catalog Numbers
HBL4700*
HBL4550* HBL4750*
HBL4700I*
–
–
NEMA L6-15R
15A 250V
UL/CSA
1.5 HP
NEMA L7-15R
15A 277V AC
UL/CSA
2 HP
Fed Spec WC596
Special Purpose Duplex Receptacles
Back and Side Wired
HBL4700
Description
Isolated ground, flush, orange RTP face.
Corrosion resistant, yellow RTP face.
1.27"
(32.3)
HBL4710
HBL4760
Special Purpose Single Receptacles,
Back and Side Wired
1.27"
(32.3)
1.42"
(36.1)
HBL4713
Catalog Numbers
HBL4710
HBL4560
Single Receptacle,
Back and Side Wired
Description
Flush, black nylon face.
1.94" 1.75" 1.38"
(49.3) (44.5) (35.1)
–
–
Fed Spec WC596
3.28"
(83.3)
2.38" 1.38"
(60.5) (35.1)
Catalog Numbers
IG4700A*
IG4550A*
HBL47CM00*
–
Description
Isolated ground, flush, orange nylon face.
Single, black nylon face mounted on a
4” (101.6) round box cover.
Panel mount, black nylon face, side wired
only, 1.75” or 1.937” (44.5 or 49.2)
mounting centers.
Catalog Numbers
IG4710
IG4560
HBL4711
–
HBL4761
HBL4713
HBL4763
HBL4563
2P 3W, 15A, 125V, 250V and 277V AC
Notes: HP ratings are AC only.
RTP is an abbreviation for reinforced thermoplastic polyester.
See Section J for full line of isolated ground devices.
See pages B-66 and B-67 for accessories.
*Supplied with break-off tabs for split circuit wiring.
B-10
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
15 Ampere, 125, 250 Volts and 277 Volts AC
Plugs and Connector Bodies
W
G
X
W
G
1.91"
(48.5)
G
Y
Plugs
Description
Insulgrip® plug,
black and white nylon.
Multiple drive screws.
IP20
SUITABILITY
Cord Dia.
.230”-.720”
(5.8-18.3)
NEMA L5-15P
15A 125V
UL/CSA
0.5 HP
NEMA L6-15P
15A 250V
UL/CSA
1.5 HP
Catalog Numbers
HBL4720C™ HBL4570C
NEMA L7-15P
15A 277V AC
UL/CSA
2 HP
1.53"
(38.9)
HBL4770C
HBL4720C
2.63"
(66.8)
Fed Spec WC596
Insulgrip plug,
corrosion resistant,
yellow and white nylon.
Multiple drive screws.
.230”-.720”
(5.8-18.3)
HBL47CM20C HBL45CM70C HBL47CM70C
1.56"
(39.6)
Fed Spec WC596
Elastogrip® plug, yellow
300”-.655”
elastomer, dust tight.
(7.6-16.6)
Elastogrip plug, yellow
300”-.655”
elastomer, water/dust tight.(7.6-16.6)
Valise® plug,
.220”-.660”
yellow nylon.
(5.6-16.8)
Valise plug,
.220”-.660”
black nylon.
(5.6-16.8)
HBL2447
–
–
HBL24W47*
–
–
HBL4723VY
HBL4573VY
HBL4773VY
HBL24W47
1.88"
(47.8)
HBL4723VBK HBL4573VBK HBL4773VBK
1.50"
(38.1)
Note: *Watertight plug IP55 suitability when installed and used with watertight connector
body.
G
W
X
G
G
HBL4723VY
2.78"
(70.6)
W
Y
Connector Bodies
NEMA L6-15R
15A 250V
UL/CSA
Catalog Numbers
HBL4729C™ HBL4579C
NEMA L7-15R
15A 277V AC
UL/CSA
HBL4779C
HBL47CM29C HBL45CM79C HBL47CM79C
HBL2547
–
–
HBL25W47*
–
–
HBL4729VY
HBL4579VY
HBL4779VY
HBL4729C
1.75"
(44.5)
4.00"
(101.6)
HBL25W47
2.59"
(65.8)
HBL4729VBK HBL4579VBK HBL4779VBK
1.50"
(38.1)
Notes: See pages B-66 and B-67 for accessories.
HP ratings are AC only.
Only plugs are HP rated.
For technical information on Insulgrip devices see page B-83.
*Watertight connector body IP55 suitability when closure plug inserted or when
installed and used properly with watertight plug.
Dimensions in Inches (mm)
1.41"
(35.8)
1.53"
(38.9)
2P 3W, 15A, 125V, 250V and 277V AC
Description
Cord Dia.
Insulgrip connector
.230”-.720”
body, black and white nylon.(5.8-18.3)
Multiple drive screws.
Insulgrip connector body, .230”-.720”
corrosion resistant,
(5.8-18.3)
yellow and white nylon.
Multiple drive screws.
Elastogrip connector body, .300”-.655”
yellow elastomer, dust tight. (7.6-16.6)
Elastogrip connector body, .300”-.655”
yellow elastomer,
(7.6-16.6)
water/dust tight.
Valise connector body,
.220”-.660”
yellow nylon.
(5.6-16.8)
Valise connector body,
.220”-.660”
black nylon.
(5.6-16.8)
NEMA L5-15R
15A 125V
UL/CSA
www.hubbell-wiring.com
HBL4729VY
B-11
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
15 Ampere, 125, 250 Volts and 277 Volts AC
Angle Devices, Flanged Inlets, and Flanged Receptacles
1.22"
(30.9)
X
W
W
G
G
G
Y
IP20 SUITABILITY
2.11"
(53.6)
Angle Plugs
Description
Insulgrip® plug,
8 position angle,
black and white nylon.
Multiple drive screws.
1.53"
(38.9)
HBL4720CA
NEMA L5-15P
15A 125V
UL/CSA
0.5 HP
Cord Dia.
.325”-.655”
(8.3-16.6)
2.56"
(65.0)
2.19"
(55.6)
IP20 SUITABILITY
Angle Connector Body
1.72"
(43.7)
1.69"
(42.9)
HBL4715C
Description
Cord Dia.
Insulgrip connector body, .325”-.655”
8 position angle,
(8.3-16.6)
black and white nylon.
Multiple drive screws.
2.31"
(58.7)
1.94"
(49.3)
.16"
(4.1)
DIA.
1.36"
(34.5)
HBL4715
2P 3W, 15A, 125V, 250V and 277V AC
2.56"
(52.3)
2.19"
(55.6)
Flanged Receptacles
Description
Insulgrip flanged receptacle,
nylon casing, back wired.
Stainless steel casing,
brown phenolic.
Corrosion resistant, stainless steel
casing, yellow melamine.
1.72"
(43.7)
1.69"
(42.9)
2.31"
(58.7)
1.94"
(49.3)
1.75"
(44.5)
1.09"
(27.7)
HBL4716
W
G
NEMA L6-15R
15A 250V
UL/CSA
Catalog Number
HBL4729CA
–
NEMA L7-15R
15A 277V AC
UL/CSA
–
W
X
G
W
G
NEMA L5-15R
15A 125V
UL/CSA
NEMA L6-15R
15A 250V
UL/CSA
NEMA L7-15R
15A 277V AC
UL/CSA
Catalog Numbers
HBL4715C
HBL4585C
HBL4785C
HBL4715
HBL4785
HBL4585
HBL47CM15
G
–
–
W
X
G
G
Y
Flanged Inlets
HBL4716C
1.50"
(38.1)
HBL4770CA
Y
NEMA L5-15R
15A 125V
UL/CSA
W
.16"
(4.1)
DIA.
X
G
NEMA L7-15P
15A 277V AC
UL/CSA
2 HP
Y
1.50"
(38.1)
B-12
W
G
1.75"
(44.5)
.16"
(4.1)
DIA.
Catalog Numbers
HBL4720CA HBL4570CA
G
.16"
(4.1)
DIA.
NEMA L6-15P
15A 250V
UL/CSA
1.5 HP
Description
Insulgrip flanged inlet,
nylon casing, back wired.
Stainless steel casing,
brown phenolic.
Corrosion resistant, stainless steel
casing, yellow melamine.
NEMA L5-15P
15A 125V
UL/CSA
NEMA L6-15P
15A 250V
UL/CSA
NEMA L7-15P
15A 277V AC
UL/CSA
Catalog Numbers
HBL4716C
HBL4586C
HBL4786C
HBL4716*
HBL4786*
HBL47CM16*
HBL4586*
–
–
Notes: See pages B-66 and B-67 for accessories.
Only plugs are HP rated.
HP ratings are AC only.
*These flanged inlets will not accept Valise® connector bodies.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
Locking Devices
The Standard for Locking Receptacles
Features and Benefits
High-impact, abuse-resistant nylon face.
Face color coding by voltage facilitates
locating and mating of proper devices.
All-brass mounting and grounding system provides a
lower resistance ground path and greater resistance
to corrosion than steel mounting systems.
Boss diameter is 1.562" on 20 and 30A
devices for simplifying installation and
accessory selection.
Glass-Reinforced
thermoplastic polyester
base (RTP) has the
desirable characteristics
of a thermoset material,
including heat, flame
resistance and dimensional
stability. The impact
resistance it provides,
however, is much greater
than that of a thermoset.
Features and Benefits
One-piece contact with long
spring arm (low stress) and
oxide cutting nibs: prevents stress
and overheating associated
with riveted contact and
short spring arms.
#10 silicon bronze terminal screw
provides greater strength and resistance
to corrosion and stripping. Anti-rotational
clamp has a stop to limit the amount
of cocking when only one side is used.
Accommodates both back and side wiring.
Wire restraint recess for both back and side
wiring, greatly reduces the possibility of
loosening the terminal connection.
On the high-impact nylon face of each Hubbell
Twist-Lock® receptacle is a ring of color. Keyed to
an internationally recognized color coding scheme,
this ring enables mating devices to be matched
quickly.
It’s just one more example of user-oriented thinking
at Hubbell.
Twist-Lock receptacles have always held
advantages over conventional ones. Today’s TwistLock receptacles maintain the advantage by
combining functional design features, unparalleled
quality and pace-setting performance.
The terminals in each Hubbell Twist-Lock
receptacle are mechanically and electrically the
finest available. These terminals incorporate
unique design features to contain and hold
conductors, including an external backwiring
B-14
“wraparound” clamp, a wire restraint recess and
more.
The materials used in every receptacle are of the
highest quality. The all brass mounting system
provides a safer, lower resistance ground path than
those made of steel. The thick wall base is
constructed of an engineered thermoplastic to offer
the benefits of a thermoset, yet with much greater
impact resistance.
Hubbell Twist-Lock Receptacles: Voltage color
coding on the outside. Proven designs and quality
materials on the inside. Any way you look at them,
they’re the standard of the industry.
125V
www.hubbell-wiring.com
250V
277V AC
480V AC
600V AC
125/250V
Dimensions in Inches (mm)
Locking Devices
20 and 30 Ampere Plugs and Connector Bodies:
The Difference Is INSULGRIP®...and a Whole Lot More
Features and Benefits
Funneled holes to permit "straightin" conductor insertion.
Wiring chambers separate and positively
insulate conductors and promote easy
inspection.
Improved terminations
include #10 multiple drive
screws and thicker .080"
clamping nuts.
Tough ribbed nylon housing for secure gripping.
Insulated nylon construction
to keep non-current carrying parts
from becoming energized.
Two-part cord grip tightens with two
screws for maximum retention force.
Broad gripping area to accommodate wide range of cable diameters.
Integral dust shield protects
wiring chamber from dust or
contaminants. Single-piece
shield/housing eliminates need
for separate step at installation.
Self-threading screws specially
designed for secure assembly.
Product indentification is visible while device
is in use. Markings include catalog number and
ratings printed in the IEC color scheme on the
current-carrying portion of the device.
course, we maintained traditional Insulgrip features
and benefits. Like the most powerful cord grip in the
industry. Insulgrip’s cord gripping design actually
clamps the conductors, not just the cable jacket. We
kept the same nylon body and housing material for
resistance to industrial chemicals, solvents and
hydrocarbons. And, the front of each plug is still
molded to its specific blade configuration, leaving no
holes to invite debris or contamination (plus we
added a new dust shield).
We restyled the cord grips for a clean, one-piece
look—and made them stronger at the same time.
And we introduced a whole new easier to read
identification system. And more, all the while, of
Of course, the Hubbell Twist-Lock® line of plugs and
connectors remains the broadest in the industry. So
if you prefer proven performance, innovation and
selection—Hubbell has you covered.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-15
Features and Benefits
They’re new and better than ever. They’re the same
and better than anything else on the market. They’re
20 and 30 amp Insulgrip plugs and connectors. We
kept the same classic integrity, rock-solid
construction and safety features that have made
these devices the industry standard. But, we added
enhancements because good is never good enough
for Hubbell. We improved the contacts with better
terminations and an exclusive double rivet design for
the female contacts.
Locking Devices
50 Ampere Plugs and Connector Bodies:
The Difference Is INSULGRIP®...and a Whole Lot More
Features and Benefits
Super tough nylon housing offers better
impact qualities than regular nylon.
Stainless steel shroud cannot be distorted
to mate with the wrong device.
Housing assembly latch slotted
to fit standard flat-blade screwdriver
providing secure assembly and
fast disassembly for wiring.
Padlockable shroud
allows compliance
to OSHA lockout tagout
regulation 29 CFR 1910 .147.
Thermoplastic polyester interior
provides heat resistance and
impact strength.
6/6 nylon nose –
thermoplastic polyester terminal
cover provides heat resistance in
terminal area and impact strength
of nose piece.
Three-piece thermoplastic clamp
assembly with stainless steel
fast lead screws provides a
more consistent, durable grip.
Sealed cable entry keeps out
moisture and dust.
Box terminal with hex socket threaded
slug is superior because it permits high
clamping pressure on conductors
without damaging strands.
Features and Benefits
Heavy-duty design for heavy-duty applications.
These Hubbell 50A Twist-Lock plugs and
connector bodies are built to go where you need
power...even in some of the harshest
environments.
On the outside, 50A plugs and connectors are
made of Super tough nylon for better impact
resistance. On the plug, the stainless steel shroud
not only provides protection and durability, but
safety as well. That’s because the rigid
construction cannot be distorted, thus minimizing
the possibility of mating incorrect devices.
One-piece grounding contact on
4-wire devices provides a more
reliable grounding system
for a safer device.
On the inside are the kinds of features that
separate Hubbell from all the rest. The cord grip
has been designed with offset gripping jaws to
securely hold the conductors – not just the cord
jacket. Hubbell’s box terminals speed wiring and
provide a superior termination. The plug’s Rynite®
thermoplastic interior provides excellent heat
resistance without compromising strength.
In all, it’s the combination of function and
performance that Hubbell demands of all its
products. And it’s why we’ll never add a feature
that compromises performance.
Rynite is a registered trademark of E. I. Dupont.
B-16
www.hubbell-wiring.com
Dimensions in Inches (mm)
Hubbell Leads the Way in Safety…Again
Features and Benefits
Next-Generation Hubbell Twist-Lock:
Here Today
Introducing the next generation of the original: the
Hubbell Twist-Lock. The Hubbell 20A and 30A
Insulgrip® Twist-Lock product line has been expanded
to provide a complete family of Safety-Shroud TwistLock devices. In this all-new line, plug blades are
protected by a fixed shroud that shields the blades
from possible deformation and, even more
importantly, virtually eliminates user contact with an
energized partially connected plug.
These products set an entirely new standard for
improved safety and reliability, and are available in
two distinct series:
• Safety-Shroud Twist-Lock
• Watertight Safety-Shroud Twist-Lock
The Watertight Safety-Shroud Twist-Lock series has
achieved a UL Type 4X rating, which is capable of
withstanding the ingress of water under hose-down
conditions. The entire outer shell is molded of a high
impact UL 94V-0 rated engineered thermoplastic. A
complete line of receptacles, plugs, connector bodies
and inlets is available in the most commonly required
configurations and ratings.
The Safety-Shroud Twist-Lock series is intended for
installation where watertightness is not a factor, but
the added safety of the shrouded design is highly
desirable. Here again, the Safety-Shroud™ is molded
of an engineered thermoplastic for a very high level of
impact resistance. In order to satisfy every application
and every need, Hubbell offers this series in three
different styles of receptacles—surface, angle and
semi-flush. Whether the needs are maintenance and
repair, renovation or new construction, there is a
receptacle design to accommodate your needs. In
addition, this series offers Safety-Shroud plugs and
even a separate Safety-Shroud kit that can be used to
convert the standard Insulgrip Twist-Lock plug into the
shrouded design.
To provide an additional measure of safety in the
workplace, Hubbell goes beyond shrouding to provide
mechanically interlocked enclosures, designed
expressly for use with this series, that virtually prevent
the connecting and disconnecting of equipment under
load. It’s another Hubbell first in the industry...the
Mechanically Interlocked Twist-Lock.
Hubbell Twist-Lock with our new Safety-Shroud:
changes the standard of safety forever.
Dimensions in Inches (mm)
Watertight Mechanical
Interlock For SafetyShroud Twist-Lock
Hubbell’s CIRCUIT-LOCK®
enclosure line has been
expanded to include a
mechanical interlock designed
for use with the new SafetyShroud Twist-Lock line. The
addition of this mechanical
interlock will complete your
Safety-Shroud Twist-Lock
industrial wiring system. The
mechanical interlock is a
breakthrough in design and
virtually eliminates the
possibility of making or
breaking the circuit under load.
Safety-Shroud
Twist-Lock
Where watertightness is not
a factor—but the added
margin of safety from the
Hubbell Safety-Shroud
Twist-Lock is—we offer a
total product line for all
applications. In addition to
Safety-Shroud plugs, the
new line includes nonwatertight receptacles in
three styles—angle, surface
and semi-flush to satisfy
every installation need.
Back Boxes
Hubbell manufactures an
extensive line of back boxes
for use with the new Safety
Shroud Twist-Lock system.
Each back box is designed
to give the user the
maximum amount of wiring
room while achieving
grounding to metallic
conduit. Hubbell back boxes
are available in non-metallic
and cast metal versions.
www.hubbell-wiring.com
Introduction
As always, it’s extremely important to us that all our
products achieve a high level of compatibility with
your existing Twist-Lock device installations. First and
foremost, the new Safety-Shroud series embodies the
basic NEMA configurations. Therefore, all shrouded
receptacles easily accept the standard NEMA locking
plugs already in use in your facility. A complete
compatibility chart appears on page B-21 to explain
every circumstance.
Watertight
Safety-Shroud
Twist-Lock®
This Type 4X rated product
line is offered in a complete
family consisting of plugs,
connector bodies,
receptacles and inlets.
Tough and tight, these
products are unequaled in
performance in even the
most hostile applications.
Locking Devices
Safety-Shroud TWIST-LOCK® System
B-17
Locking Devices
Watertight Safety-Shroud TWIST-LOCK® System
Receptacles, Plugs, Connector Bodies and Flanged Inlets
Features and Benefits
Closure cap is included for environmental
seal when device is not in use.
Alignment arrows and lock and unlock symbols
provide a visual indication that devices
are properly connected.
One-piece, engineered
thermoplastic housing is
impact-resistant for heavyduty industrial environments.
External keying
provides
quick mating
of devices.
Blades are recessed
for protection against
bending and breaking.
Cord grip screw recess
minimizes screwdriver
slippage.
All screws are #10 multiple
drive head.
One-step automatic Neoprene sealing gland
and engineered thermoplastic guard assure
sealing when device is fully connected.
Catalog number and color-coded voltage rating
are easily visible even when in use.
Universal Neoprene Diaphragm
Seal
Spring-Loaded Cover
Panel Or Box Mount Receptacles
And Inlets
Safety-Shroud
Seal accommodates a wide range of
cord sizes from #16-3 Type SJ to #8-5
Type S, SO.
Features and Benefits
• High impact, thermoplastic housing for
heavy-duty industrial environments.
• Catalog number and color-coded
voltage rating are easily visible when in
use.
• Stainless Steel 302/304, #10 multiple
drive head mounting screws provide
corrosion resistance.
• Mounting screw recesses minimize
screwdriver slippage.
• Lockout/tagout hole on inlets allow
compliance to OSHA regulation 29 CFR
1910.147.
• Neoprene closure cap provided with
inlets for environmental seal when not
in use.
• Accepts all mating NEMA locking plugs
and most connector bodies, allowing
interchangeability with existing devices.
B-18
www.hubbell-wiring.com
One-step push-to-close spring-loaded
cover with latch allows for fast opening
and closing of lift cover. Result:
environmental sealing is assured.
• Virtually eliminates bent and broken
plug blades, leading to longer
equipment life.
• Extends life of mating receptacles by
eliminating damage caused by
insertion of bent blades.
• Extra protection for personnel by
significantly reducing chance of
inadvertent contact with blades when
connecting or disconnecting energized
receptacles and connector bodies.
• Reduces exposure to arcing when
connecting or disconnecting plugs
under load.
• Compliance with California Code of
Regulations, Title 8, Article 51,
subsection 2510.7(b), which requires
shrouding for devices exceeding 300
volts.
• Lockout/tagout hole allows compliance
with OSHA regulation 29 CFR
1910.147.
• Sealing gland and thermoplastic guard
assure sealing when fully connected.
Dimensions in Inches (mm)
Receptacles and Plugs
Features and Benefits
Impact resistant shroud made
of engineered thermoplastic
protects blades against
bending or breaking.
Catalog number and
color-coded voltage rating
are visible even when in use.
Alignment arrows and lock and unlock symbols
provide a visual indication that devices
are properly connected.
Locking Devices
Safety-Shroud TWIST-LOCK® System
External keying on plug devices allows
quick mating of devices.
Lockout/tagout hole allows compliance
with OSHA regulation 29 CFR 1910.147.
All screws are #10 multiple drive head.
Engineered thermoplastic housing is impact
and corrosion resistant, making it suitable for
heavy-duty industrial environments.
Safety-Shroud Plug Features and Benefits
• Mates with most NEMA locking
connector bodies.
• Virtually eliminates bent and broken
plug blades.
• Provides protection for personnel by
reducing chance of inadvertent contact
with blades when connecting or
disconnecting energized devices.
• Reduces exposure to arcing when
connecting or disconnecting under
load.
Straight receptacle
housing provides a low
installed profile when
plug is not in use with
receptacle. This device
is designed for
installation on singlegang boxes.
Angle receptacle
housing provides low
installed profile when
plug is in use with
receptacle. This
device is designed
for installation on
single-gang boxes.
Receptacle Features and Benefits
• Internal keying on receptacles aligns
blades for quick mating of devices.
• Accepts all NEMA locking plugs,
allowing interchangeability with
existing devices.
Dimensions in Inches (mm)
• Catalog number and color-coded
voltage rating are visible when in use.
• All screws are #10 multiple drive head.
www.hubbell-wiring.com
• Engineered thermoplastic housing is
impact and corrosion-resistant, for use
in heavy-duty industrial environments.
B-19
Features and Benefits
Semi-flush receptacle
mounting provides
lowest installed profile
when plug is not in use
with receptacle. This
device is designed for
installation on 2 gang
boxes.
• Extends life of mating receptacles by
eliminating damage caused by
insertion of bent blades.
• Complies with California Code of
Regulation, which requires shrouding
for devices exceeding 300 volts.
• Lockout/tagout hole allows compliance
to OSHA regulation 29 CFR 1910.147.
• Allows engagement with Mechanical
Interlock Enclosure which virtually
prevents make and break under load.
Locking Devices
Switched Safety Enclosures
CIRCUIT-LOCK® Unfused Safety-Shroud TWIST-LOCK®
Mechanical Interlock
Features and Benefits
Angled 20 or 30 Amp Hubbell Watertight
Safety-Shroud Twist-Lock receptacle provides
watertight, low profile and mechanical
interlock capabilities.
Lockable handle provides lockout protection for greater safety
and compliance with OSHA lockout requirements.
Enclosure back is
designed for top,
bottom or back
feed options.
Heavy-duty interlock linkage
prevents make and break
under load.
Horsepower rated switch.
Moveable feet may be used in
horizontal or vertical position.
Features and Benefits
Heavy-duty internal frame bonds conduit
and all grounds and has a DIN rail to
accommodate the switch.
Hubbell introduces the first
mechanical interlock for TwistLock. This new, unfused
mechanical interlock for
watertight Safety-Shroud TwistLock integrates a watertight
receptacle with a linked
disconnect switch to provide a
mechanically interlocked
receptacle. This virtually
eliminates the possibility of
making or breaking the circuit
B-20
Premolded conduit entry hole is offset to prevent water
condensation from falling directly on to interior electrical
components. Also speeds installation by making it easier
to pull conductors.
while under load or making a
casual or “lazy” connection. The
switch cannot be turned “ON”
until the plug is properly inserted
and locked, and the plug cannot
be removed until the switch is
turned “OFF.” All these protective
features are included in a
compact Type 4X hose-directed
water and corrosion resistant
enclosure that allows for top,
bottom or back feed options. The
www.hubbell-wiring.com
non-metallic enclosure is
nonconductive, yet has an
internal frame to assure ground
continuity with metallic conduit.
In addition, this interlock works
with all Safety-Shroud Twist-Lock
plugs. The new unfused
mechanical interlock for
watertight Safety-Shroud TwistLock can be locked out as a
method of compliance with
OSHA lockout/tagout regulations.
Dimensions in Inches (mm)
Compatibility and Environmental Protection
Watertight Safety-Shroud™, Safety-Shroud and NEMA Devices
Twist-Lock
Connector Bodies
Twist-Lock Receptacles
Swit
ched
Twis
t-Lo
Enc
ck®
losu
PSJO
re
CAT. IST
OTN
SSFITNO.
XXXXX
FIT ISTI
TIEH EWRQX
SALAK QQ
J SKA
OF
F
Watertight
SafetyShroud
Mechanical
Watertight
Interlock
Safety-Shroud Enclosure
Safety-Shroud
Locking Devices
TWIST-LOCK® System
ON
CAUTIO
owtosn N:
Saitiew
istelsls townf
wthuilietioeta
tiesntof
ATTEN
oenls.sothe sitieb
sothe TION:
othes
toehs Alsritw
oetyhen
ot
l itehwopt heta
sithethlslei dithe
ithelsltoenll otehl
sl lsjtel
tihehhll
.
Switched
Enclosure
NEMA
Watertight
SafetyShroud
NEMA
Twist-Lock Plugs
Watertight
SafetyShroud
YES
Type 4X,
Type 12
YES
Type 4X,
Type 12K
YES
Type 1
NO
NO
YES
Type 4X,
Type 12
YES
Type 1
SafetyShroud
YES
Type 1
YES
Type 1
YES
Type 1
NO
NO
YES
Type 1
YES
Type 1
NEMA
YES
Type 1
NO
YES
Type 1
YES
Type 3R
YES
Type 1
YES
Type 1
YES
Type 1
NEMA
NA
NA
NA
NA
NA
NO
YES
Type 1
Watertight
SafetyShroud
NA
NA
NA
NA
NA
YES
Type 4X,
Type 12
YES
Type 1
Twist-Lock Inlets
Indoor
Type 3R
Raintight
Type 4X
Hose-directed water and corrosion resistant
Type 12
Dust tight, dripproof without knockouts
Type 12K
Dust tight, dripproof with knockouts
YES
Interchangeable
NO
Does not interchange
NA
Not Applicable
Refer to section W for full description of enclosure types.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-21
Compatibility and Environmental Protection Chart
Type 1
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
20 Ampere, 125, 250 Volts and 277 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
1.70"
(43.2)
1.23"
(31.2)
X
W
G
Y
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
#6-32 TAP
.98"
(24.9)
HBL2310
2.26"
(57.4)
1.97"
(50.0)
HBL2313
120°
Single Flush Receptacles,
Back and Side Wired
NEMA L5-20R
20A 125V
UL/CSA
1 HP
NEMA L6-20R
20A 250V
UL/CSA
2 HP
NEMA L7-20R
20A 277V AC
UL/CSA
2 HP
Description
Black nylon face.
Isolated ground, orange nylon face.
Corrosion resistant, yellow nylon face.
Catalog Numbers
HBL2310
HBL2320
IG2310
IG2320
HBL23CM10
–
HBL2330
–
–
Insulgrip Connector Bodies IP20
3.86"
(98.0)
SUITABILITY
Description
Catalog Numbers
Black and white nylon.
HBL2313
HBL2323
Corrosion resistant, yellow nylon.
HBL23CM13
HBL23CM23
Note: Cord clamp range .360 ”-.930 ” (9-24).
HBL2333
–
Insulgrip Flanged Receptacles
Description
Nylon casing, back wired.
2.88"
(73.2)
Catalog Numbers
HBL2316
HBL2326
HBL2336
.19"
(4.8)
DIA.
120°
W
X
G
1.25" R.
(31.8)
W
G
G
Y
2.09"
(53.1)
Insulgrip Plugs IP20
2.04"
(51.8)
SUITABILITY
Description
Black and white nylon.
Corrosion resistant, yellow nylon.
HBL2316
2P 3W, 20A, 125V, 250V and 277V AC
W
G
G
NEMA L5-20P
20A 125V
UL/CSA
1 HP
NEMA L6-20P
20A 250V
UL/CSA
2 HP
Catalog Numbers
HBL2311
HBL2321
HBL23CM11
HBL23CM21
NEMA L7-20P
20A 277V AC
UL/CSA
2 HP
HBL2331
–
Notes: Cord grip range .360”-.930 ” (9-24).
See page B-73 for Add-A-Shroud™ kit.
2.75"
(69.9)
Insulgrip Flanged Inlets
2.26"
(57.4)
1.97"
(50.0)
Catalog Numbers
HBL2315
HBL2325
HBL2335
Notes: See pages B-68 and B-69 for accessories.
See page B-63 for switched enclosure.
For technical information see page B-83.
HP ratings are AC only.
Only receptacles and plugs are HP rated.
HBL2311
120°
Description
Nylon casing, back wired.
2.88"
(73.2)
.19"
(4.8)
DIA.
120°
1.25" R.
(31.8)
2.09"
(53.1)
2.04"
(51.8)
HBL2315
B-22
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
20 Ampere, 125, 250 Volts and 277 Volts AC
Watertight Safety-Shroud TWIST-LOCK® System
IP66
UL Listed, CSA
Certified to Type
4, 4X, & 12
2.69"
(68.3)
SUITABILITY
W
X
W
G
3.75"
(95.3)
G
G
Y
Watertight Safety-Shroud
Receptacles, Back Wired
NEMA L5-20R
20A 125V
UL/CSA
1 HP
NEMA L6-20R
20A 250V
UL/CSA
2 HP*
Description
Catalog Numbers
Gray Valox® housing & flange.
HBL2310SW
HBL2320SW
Note: Receptacles only fit boxes listed on Page B-72.
NEMA L7-20R
20A 277V AC
UL/CSA
2 HP
HBL2330SW
3.75"
(95.3)
1.50"
(38.1)
HBL2320SW
Watertight Safety-Shroud Connector Bodies
Description
Black Valox housing,
White Valox clamps.
Catalog Numbers
HBL2313SW
HBL2323SW
W
HBL2333SW
W
X
G
2.56"
(65.0)
4.38"
(111.1)
G
G
Y
Watertight Safety-Shroud
Plugs
Description
Black Valox housing,
White Valox clamps.
NEMA L5-20P
20A 125V
UL/CSA
1 HP
NEMA L6-20P*
20A 250V
UL/CSA
2 HP*
Catalog Numbers
HBL2311SW
HBL2321SW
HBL2323SW
NEMA L7-20P
20A 277V AC
UL/CSA
2 HP
HBL2331SW
2.78"
(70.6)
Description
Gray Valox housing and flange.
Catalog Numbers
HBL2315SW
HBL2325SW
HBL2321SW
HBL2335SW
Notes: Only receptacles and plugs 480V AC or less are HP rated.
*Also suitable for 208V.
HP ratings are AC only.
Cord grip range for plugs and connector bodies
.300”–.930” (9–24), #16-3 Type SJ to #8-3 Type S, SO.
For technical information see page B-84.
CIRCUIT-LOCK® Unfused
Safety-Shroud Mechanical Interlock for Twist-Lock® Receptacles
Description
Mechanical Interlock accommodates
20A and 30A watertight safety-shroud receptacles.
Catalog Number
HBLMITL**
2.28"
(57.9)
3.75"
(95.3)
1.63"
(41.4)
3.75"
(95.3)
HBL2325SW
Note: **Not shown, see pages B-64 and B-65 for details.
®Valox
is a registered trademark of General Electric Company.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-23
2P 3W, 20A, 125V, 250V and 277V AC
4.50"
(114.3)
Watertight Safety-Shroud Flanged Inlets
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
20 Ampere, 125, 250 Volts and 277 Volts AC
Safety-Shroud TWIST-LOCK® System
3.14"
(79.8)
X
W
G
W
G
G
Y
Safety-Shroud Twist-Lock
Receptacles, Back Wired
4.57"
(116.1)
Description
Angle housing one gang.
Surface mounting one gang.
Semi-flush two gang.
2.88"
(73.2)
NEMA L5-20R
20A 125V
UL/CSA
1 HP
NEMA L6-20R
20A 250V
UL/CSA
2 HP*
NEMA L7-20R
20A 277V AC
UL/CSA
2 HP
Catalog Numbers
HBL2310AR HBL2320AR HBL2330AR
HBL2310SR HBL2320SR HBL2330SR
HBL2310SR2 HBL2320SR2 HBL2330SR2
Notes: See page B-72 for box mounting application.
Housing and flange, gray Valox®.
HBL2320AR
1.58"
(40.1)
W
IP20
4.56"
(115.8)
SUITABILITY
Insulgrip Connector Bodies
W
X
G
G
G
Y
NEMA L5-20R
20A 125V
UL/CSA
NEMA L6-20R
20A 250V
UL/CSA
Description
Catalog Numbers
Black and white nylon.
HBL2313
HBL2323
Note: Cord grip range .360 ”-.930 ” (9-24).
2.84"
(72.1)
NEMA L7-20R
20A 277V AC
UL/CSA
HBL2333
HBL2320SR
W
.77"
(19.6)
W
X
G
G
G
Y
IP20
Safety-Shroud Male Plugs
5.12"
(130.0)
2P 3W, 20A, 125V, 250V and 277V AC
SUITABILITY
NEMA L5-20P
20A 125V
UL/CSA
1 HP
NEMA L6-20P*
20A 250V
UL/CSA
2 HP*
Description
Catalog Numbers
Black and white nylon body,
HBL2311S
HBL2321S
white Valox® shroud.
Note: Cord clamp range .360 ”-.930 ” (9-24).
5.12"
(130.0)
NEMA L7-20P
20A 277V AC
UL/CSA
2 HP
HBL2331S
HBL2320SR2
3.86"
(98.0)
X
W
W
G
G
G
Y
2.26"
(57.4)
1.97"
(50.0)
Insulgrip®
Flanged Inlets
Description
Nylon casing, back wired.
HBL2323
NEMA L5-20P
20A 125V
UL/CSA
NEMA L6-20P
20A 250V
UL/CSA
2 HP
Catalog Numbers
HBL2315
HBL2325
NEMA L7-20P
20A 277V AC
UL/CSA
2 HP
HBL2335
Note: Only receptacles and plugs 480V AC or less are HP rated.
*Also suitable for 208V AC.
HP ratings are AC only.
For technical information, see page B-83.
2.26"
(57.4)
2.04"
(51.8)
3.97"
(100.8)
HBL2321S
®Valox
B-24
is a registered trademark of General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
20 Ampere, 125, 250 Volts and 277 Volts AC
VALISE® Plugs and Connector Bodies
IP20
W
SUITABILITY
X
W
G
G
G
Y
NEMA L5-20P
20A 125V
UL/CSA
1 HP
Valise Plugs
Description
Yellow nylon.
Corrosion resistant,
yellow nylon.
Black nylon.
Cord Dia.
.325”-.720”
(8.26-18.3)
.325”-.720”
(8.26-18.3)
.325”-.720”
(8.26-18.3)
NEMA L6-20P
20A 250V
UL/CSA
2 HP
Catalog Numbers
HBL2311VY
HBL2321VY
HBL23CM11V
NEMA L7-20P
20A 277V AC
UL/CSA
2 HP
HBL2331VY
–
2.50"
(63.5)
1.78"
(45.2)
–
HBL2311VBK HBL2321VBK HBL2331VBK
W
G
X
HBL2311VY
W
G
G
Y
Valise Connector Bodies
Description
Yellow nylon.
Black nylon.
Cord Dia.
.325”-.720”
(8.26-18.3)
.325”-.720”
(8.26-18.3)
NEMA L5-20R
20A 125V
UL/CSA
NEMA L6-20R
20A 250V
UL/CSA
NEMA L7-20R
20A 277V AC
UL/CSA
Catalog Numbers
HBL2313VY
HBL2323VY
–
2.60"
(66.0)
1.78"
(45.2)
HBL2313VBK HBL2323VBK HBL2333VBK
HBL2313VY
Notes: Connector bodies are not HP rated.
HP ratings are AC only.
See page B-88 for technical information.
Weatherproof Accessories IP55**
SUITABILITY
2P 3W, 20A, 125V, 250V and 277V AC
Description
Catalog Numbers
Yellow Seal-Tite® elastomer triple seal cover for use with Valise
HBL60CM31V*
plugs when used in cord set and Valise connector bodies when used
with flanged inlet.
Yellow Seal-Tite elastomer triple seal cover for use with
HBL60CM32V*
Valise connector bodies.
HBL60CM31V
Note: **When installed and used properly with plug and connector body
combinations.
* Not UL Listed, CSA Certified
HBL60CM32V
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-25
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
20 Ampere, 347, 480 and 600 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
1.70"
(43.2)
1.23"
(31.2)
Single Flush Receptacles,
Back and Side Wired
2.67"
(67.8)
X
W
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
Description
Black nylon face.
Isolated ground, orange nylon face.
X
G
G
G
Y
Y
NEMA L24-20R
20A 347V AC
UL/CSA
Y
NEMA L8-20R
20A 480V AC
UL/CSA
3 HP
Catalog Numbers
HBL3720
HBL2340
–
IG2340
NEMA L9-20R
20A 600V AC
UL/CSA
HBL2350
–
#6-32 TAP
.98"
(24.9)
HBL2340
3.86"
(98.0)
Insulgrip Connector Bodies IP20
2.26"
(57.4)
1.97"
(50.0)
SUITABILITY
Description
Catalog Numbers
Black and white nylon.
HBL3723
HBL2343
Note: Cord clamp range .360 ”-.930 ” (9-24).
HBL2353
HBL2343
2.88"
(73.2)
120°
1.25" R
(31.8)
120°
2P 3W, 20A, 347V AC, 480V AC and 600V AC
.19"
(4.8)
DIA.
Insulgrip Flanged Receptacles
Description
Nylon casing, back wired.
Catalog Numbers
HBL3726
HBL2346
HBL2356
2.09"
(53.1)
2.04"
(51.8)
X
W
X
G
G
HBL2346
Y
Insulgrip Plugs IP20
2.75"
(69.9)
SUITABILITY
Description
Black and white nylon.
2.26"
(57.4)
1.97"
(50.0)
NEMA L24-20P
20A 347V AC
UL/CSA
Y
G
Y
NEMA L8-20P
20A 480V AC
UL/CSA
3 HP
Catalog Numbers
HBL3721
HBL2341
NEMA L9-20P
20A 600V AC
UL/CSA
HBL2351
Notes: Cord clamp range .360 ”-.930 ” (9-24).
See page B-73 for Add-A-Shroud™ kit.
HBL2341
2.88"
(73.2)
Insulgrip Flanged Inlets
120°
1.25" R
(31.8)
.19" 120°
(4.8)
DIA.
2.09"
(53.1)
2.04"
(51.8)
Description
Nylon casing, back wired.
Catalog Numbers
HBL3725
HBL2345
HBL2355
Notes: Only receptacles and plugs up to 480V AC are HP rated.
For technical information see page B-83.
See pages B-68 and B-69 for accessories.
See page B-63 for switched enclosure.
HP ratings are AC only.
HBL2345
B-26
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
30 Ampere, 125, 250 Volts and 277 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
X
W
G
1.70"
(43.2)
W
G
1.23"
(31.2)
G
Y
Single Flush Receptacles,
Back and Side Wired
NEMA L5-30R
30A 125V
UL/CSA
2 HP
Description
Black nylon face.
Isolated ground, orange nylon face.
Corrosion resistant, yellow nylon face.
Catalog Numbers
HBL2610
HBL2620
IG2610
IG2620
HBL26CM10
Insulgrip Connector Bodies IP20
Description
Black and white nylon.
Heat stabilized, gray nylon, 220° F (104° C).
Corrosion resistant, yellow nylon.
Note: Cord clamp range .360 ”-.930 ” (9-24).
NEMA L6-30R
30A 250V
UL/CSA
2 HP
NEMA L7-30R
30A 277V AC
UL/CSA
3 HP
HBL2630
–
–
2.67"
(67.8)
#6-32 TAP
.98"
(24.9)
SUITABILITY
Catalog Numbers
HBL2613
HBL2623
HBL2633
HBL2613F
HBL2623F
–
HBL26CM13 HBL26CM23
–
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
HBL2620
3.86"
(98.0)
2.26"
(57.4)
1.97"
(50.0)
HBL2623
Insulgrip Flanged Receptacles
2.88"
(73.2)
Description
Catalog Numbers
Nylon casing, back wired.
HBL2616
HBL2626
Heat stabilized, gray nylon, 220° F (104° C). HBL2616F
HBL2626F
HBL2636
–
X
W
G
120°
HBL2626
SUITABILITY
Description
Black and white nylon.
Heat stabilized, gray nylon, 220° F (104° C).
Corrosion resistant, yellow nylon.
NEMA L7-20P
20A 277V AC
UL/CSA
2 HP
Catalog Numbers
HBL2611
HBL2621
HBL2631
HBL2611F
HBL2621F
–
HBL26CM11 HBL26CM21
–
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
Notes: Cord clamp range .360 ”-.930 ” (9-24).
See page B-73 for Add-A-Shroud™ kit.
HBL2621
Insulgrip Flanged Inlets
Description
Catalog Numbers
Nylon casing, back wired.
HBL2615
HBL2625
Heat stabilized, gray nylon, 220° F (104° C). HBL2615F
HBL2625F
2.88"
(73.2)
HBL2635
–
Notes: All HP ratings are AC only. Only receptacles and plugs are HP rated.
For technical information see page B-83.
For accessories see pages B-68 and B-69.
See page B-63 for switched enclosure.
120°
1.25" R
(31.8)
.19" 120°
(4.8)
DIA.
2.09"
(53.1)
2.04"
(51.8)
HBL2625
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-27
2P 3W, 30A, 125V, 250V and 277V AC
Insulgrip Plugs IP20
NEMA L6-30P
30A 250V
UL/CSA
2 HP
2.09"
(53.1)
2.04"
(51.8)
G
Y
NEMA L5-30P
30A 125V
UL/CSA
2 HP
1.25" R
(31.8)
.19"
(4.8)
DIA.
W
G
120°
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
30 Ampere, 125 and 250 Volts
Watertight Safety-Shroud TWIST-LOCK® System
IP66
SUITABILITY
UL Listed, CSA
Certified to Type 4,
4X, & 12
2.69"
(68.3)
W
X
G
G
Y
Watertight Safety-Shroud
Receptacles, Back Wired
3.75"
(95.3)
3.75"
(95.3)
1.50"
(38.1)
NEMA L5-30R
30A 125V
UL/CSA
2 HP
NEMA L6-30R
30A 250V
UL/CSA
2 HP*
Description
Catalog Numbers
Gray Valox® housing and flange.
HBL2610SW
HBL2620SW
Note: Receptacles only fit boxes listed on page B-72.
HBL2610SW
Watertight Safety-Shroud Connector Bodies
Description
Black Valox housing, white Valox clamps.
Catalog Numbers
HBL2613SW
HBL2623SW
2.56"
(65.0)
X
W
4.38"
(111.1)
G
G
HBL2613SW
Y
Description
Black Valox housing, white Valox clamps.
2.78"
(70.6)
NEMA L6-30P
30A 250V
UL/CSA
2 HP*
NEMA L5-30P
30A 125V
UL/CSA
2 HP
Watertight Safety-Shroud Plugs
Catalog Numbers
HBL2611SW
HBL2621SW
Watertight Safety-Shroud Flanged Inlets
4.50"
(114.3)
HBL2611SW
Description
Catalog Numbers
Gray Valox housing and flange.
HBL2615SW
HBL2625SW
Notes: Only receptacles and plugs 480V AC or less are HP rated.
*Also suitable for 208V.
HP ratings are AC only.
Cord grip range for plugs and connector bodies
.325”-.930” (9-24). #16-3 Type SJ to #8-3 Type S, SO.
For technical information see page B-84.
2.28"
(57.9)
3.75"
(95.3)
2P 3W, 30A, 125V, 250V
CIRCUIT-LOCK® Unfused
Safety-Shroud Mechanical Interlock for Twist-Lock® Receptacles
1.63"
(41.4)
3.75"
(95.3)
HBL2615SW
Description
Mechanical Interlock accommodates 30A
watertight Safety-Shroud receptacles.
Note: **Not shown, see pages B-64 and B-65.
Catalog Number
HBLMITL**
®Valox is a registered trademark of General Electric Company.
B-28
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
30 Ampere, 125 and 250 Volts
Safety-Shroud TWIST-LOCK® System
W
3.14"
(79.8)
X
G
G
Y
Safety-Shroud Twist-Lock
Receptacles, Back Wired
NEMA L5-30R
30A 125V
UL/CSA
2 HP
Description
Angle housing one gang.
Surface mounting one gang.
Semi-flush two gang.
NEMA L6-30R
30A 250V
UL/CSA
2 HP*
4.57"
(116.1)
Catalog Numbers
HBL2610AR
HBL2620AR
HBL2610SR
HBL2620SR
HBL2610SR2
HBL2620SR2
2.88"
(73.2)
Notes: See page B-72 for box mounting application.
Housing and flange, gray Valox®.
HBL2620AR
1.58"
(40.1)
X
W
G
G
Y
Insulgrip Connector Bodies IP20
NEMA L5-30R
30A 125V
UL/CSA
SUITABILITY
Description
Black and white nylon.
Note: Cord clamp range .360 ”-.930 ” (9-24).
NEMA L6-30R
30A 250V
UL/CSA
4.56"
(115.8)
Catalog Numbers
HBL2613
HBL2623
2.84"
(72.1)
HBL2620SR
X
W
G
G
.77"
(19.6)
Y
Safety-Shroud Male Plug IP20
SUITABILITY
Description
Black and white nylon body,
white Valox shroud.
Note: Cord clamp range .360 ”-.930 ” (9-24).
NEMA L5-30P
30A 125V
UL/CSA
2 HP
NEMA L6-30P
30A 250V
UL/CSA
2 HP*
5.12"
(130.0)
Catalog Numbers
HBL2611S
HBL2621S
5.12"
(130.0)
HBL2620SR2
X
W
3.86"
(98.0)
G
G
Y
NEMA L6-30P
30A 250V
UL/CSA
2 HP
NEMA L5-30P
30A 125V
UL/CSA
2 HP
Description
Nylon casing, back wired.
Catalog Numbers
HBL2615
HBL2625
2.26"
(57.4)
1.97"
(50.0)
HBL2623
Notes: Only receptacles and plugs 480V AC or less are HP rated.
*Also suitable for 208V.
HP ratings are AC only.
For technical information see page B-83.
2.26"
(57.4)
2.04"
(51.8)
3.97"
(100.8)
HBL2621S
®Valox
is a registered trademark of General Electric Company.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-29
2P 3W, 30A, 125V, 250V
Insulgrip Flanged Inlets
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
30 Ampere, 125 and 250 Volts
VALISE® Plugs and Connector Bodies
X
W
G
G
2.50"
(63.5)
Y
Valise Plugs IP20
1.78"
(45.2)
Description
Yellow nylon.
HBL2611VY
NEMA L5-30P
30A 125V
UL/CSA
2 HP
SUITABILITY
Corrosion resistant, yellow nylon.
Black nylon.
Cord Dia.
.590”-.930”
(15.0-23.6)
.590”-.930”
(15.0-23.6)
.590”-.930”
(15.0-23.6)
NEMA L6-30P
30A 250V
UL/CSA
2 HP
Catalog Numbers
HBL2611VY
HBL2621VY
HBL26CM11V
HBL2611VBK
–
HBL2621VBK
2.60"
(66.0)
X
W
1.78"
(45.2)
G
G
Y
HBL2613VY
Valise Connector Bodies IP20
Description
Yellow nylon.
Corrosion resistant, yellow nylon.
Black nylon.
SUITABILITY
Cord Dia.
.590”-.930”
(15.0-23.6)
.590”-.930”
(15.0-23.6)
.590”-.930”
(15.0-23.6)
NEMA L5-30R
30A 125V
UL/CSA
NEMA L6-30R
30A 250V
UL/CSA
Catalog Numbers
HBL2613VY
HBL2623VY
HBL26CM13V
HBL2613VBK
–
HBL2623VBK
Notes: Connector bodies are not HP rated.
HP ratings are AC only.
See page B-88 for technical information.
2P 3W, 30A, 125V, 250V AC
HBL60CM31V
HBL60CM32V
Weatherproof Accessories IP55**
SUITABILITY
Description
Catalog Numbers
Yellow Seal-Tite® elastomer triple seal cover for use with Valise
HBL60CM31V*
plugs when used in cord set and Valise connector bodies when used
with flanged inlet.
Yellow Seal-Tite elastomer triple seal cover for use with Valise
HBL60CM32V*
connector bodies.
Note: **When installed and used properly with plug and connector body combinations.
* Not UL Listed, CSA Certified.
B-30
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
30 Ampere, 480 and 600 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
X
X
1.70"
(43.2)
G
G
Y
1.23"
(31.2)
Y
Single Flush Receptacles,
Back and Side Wired
NEMA L8-30R
30A 480V AC
UL/CSA
5 HP
Description
Black nylon face.
Catalog Numbers
HBL2640
HBL2650
NEMA L9-30R
30A 600V AC
UL/CSA
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
#6-32 TAP
.98"
(24.9)
HBL2650
Insulgrip Connector Bodies IP20
3.86"
(98.0)
SUITABILITY
Description
Black and white nylon.
Note: Cord clamp range .325”-.930 ” (8.25-24).
Catalog Numbers
HBL2643
HBL2653
2.26"
(57.4)
1.97"
(50.0)
HBL2653
2.88"
(73.2)
120°
Insulgrip Flanged Receptacles
Description
Nylon casing, back wired.
1.25" R
(31.8)
Catalog Numbers
HBL2646
HBL2656
.19"
(4.8) 120°
DIA.
2.09"
(53.1)
2.04"
(51.8)
G
G
Y
SUITABILITY
Description
Black and white nylon.
NEMA L8-30P
30A 480V AC
UL/CSA
5 HP
Y
2.75"
(69.9)
NEMA L9-30P
30A 600V AC
UL/CSA
Catalog Numbers
HBL2641
HBL2651
2.26"
(57.4)
1.97"
(50.0)
Notes: Cord clamp range .325”-.930 ” (8.25-24).
See page B-73 for Add-A-Shroud™ kit.
HBL2651
2.88"
(73.2)
120°
Insulgrip Flanged Inlets
Description
Nylon casing, back wired.
Notes: Only receptacles and plugs up to 480V AC are HP rated.
For technical information see page B-83.
HP ratings are AC only.
For accessories see pages B-68 and B-69.
See page B-63 for switched enclosure.
Dimensions in Inches (mm)
1.25" R
(31.8)
120°
Catalog Numbers
HBL2645
HBL2655
www.hubbell-wiring.com
.19"
(4.8)
DIA.
2.09"
(53.1)
2.04"
(51.8)
HBL2655
B-31
2P 3W, 30A, 480V AC and 600V AC
Insulgrip Plugs IP20
HBL2656
X
X
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
50 Ampere, 125, 250 Volts and 480 Volts AC
Receptacles, Connector Bodies, Plugs and Flanged Inlets
2.13"
(54.1)
Y
Y
W
X
X
G
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
Receptacles
Description
Black melamine.
Connector Bodies IP20
2.44"
(62)
G
G
50A 125V
50A 250V
50A 480V AC
Catalog Numbers
CS6370
CS8269
CS8469†
SUITABILITY
Description
Catalog Numbers
Nylon housing, Rynite® interior.
CS6360C
CS8264C
Note: Cord clamp range .830 ”-1.100” (21.08-28.19).
CS8269
6.34"
(161.0)
CS8464C
Y
Y
W
2.59"
(65.8)
Plugs IP20
G
SUITABILITY
50A 125V
X
X
G
G
50A 250V
50A 480V AC
Description
Catalog Numbers
Nylon housing, Rynite interior.
CS6361C
CS8265C
Note: Cord clamp range .830 ”-1.100” (21.08-28.19).
CS8264C
CS8465C
Flanged Inlets
6.38"
(162.0)
Description
Zinc plated steel casing.
thermoplastic interior.
2.59"
(65.8)
Catalog Numbers
CS6377†
CS8275
CS8475†
Note: See page B-16 for product features.
Accessories
Weatherproof Boots IP55**
CS8265C
Description
Catalog Numbers
Seal-Tite® triple seal black elastomeric cover for plugs when used HBL7716C*
in a cord set and connector bodies when used with flanged inlets.
Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C*
when used with cord sets.
2P 3W, 50A, 125V, 250V and 480V AC
3.50"
(88.9)
90°
.19"
(4.8)
DIA.
1.50"R
(38.0)
2.62"
(66.5)
2.17"
(55.1)
CS8275
SUITABILITY
Note: Boots shown on page B-74.
Weatherproof Receptacle Cover Plates
Description
Gray thermoplastic, corrosion resistant.
Yellow thermoplastic, corrosion resistant.
IP44
SUITABILITY
Catalog Numbers
HBL7774WO
HBL77CM74WO
Receptacle Wall Plate & Box Cover
Description
Stainless steel 302/304, smooth.
Galvanized Steel fits 4” square, 4 11/16” or 2 gang box
Catalog Number
S750
HBL50SC
Closure Plug for 50A Inlets
Description
Black closure plug.
HBL7774WO
Notes: For additional accessories see page B-74.
For technical information see page B-85.
**When installed and used properly with plug and connector body combinations.
†Not CSA Certified.
* Not UL Listed, CSA Certified.
®Rynite
B-32
Catalog Number
HBL4892*
is a registered trademark of E. I. Dupont.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
50 Ampere, 250 Volts DC and 600 Volts AC
Receptacle, Connector Body, Plug and Flanged Inlets
2.13"
(54.1)
Y
X
G
50A 250V DC
50A 600V AC
Receptacle
Description
Black melamine.
Connector Body IP20
2.69" 3.28"
(68.3) (83.3)
Catalog Number
HBL3771
1.03"
(26.2)
SUITABILITY
Description
Nylon housing, Rynite® interior.
Note: Cord clamp range .830”-1.100” (21.08-28.19).
2.44"
(62)
Catalog Number
HBL3762C
HBL3771
6.34"
(161.0)
.63"
(16.0)
Y
X
2.59"
(65.8)
G
Plug IP20
50A 250V DC
50A 600V AC
SUITABILITY
Description
Nylon housing, Rynite interior.
Note: Cord clamp range .830”-1.100” (21.08-28.19).
Catalog Number
HBL3763C
HBL3762C
Flanged Inlets
6.38"
(162.0)
Description
Zinc plated steel casing, thermoplastic int.
Zinc plated steel casing, thermoplastic int. with lift cover.
Accessories
Weatherproof Boots IP55**
Catalog Numbers
HBL3777
HBL3767
2.59"
(65.8)
HBL3763C
SUITABILITY
Description
Catalog Numbers
Seal-Tite triple seal black elastomeric cover for plugs when used HBL7716C
in a cord set and connector bodies when used with flanged inlets.
Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C
when used with cord sets.
Description
Gray thermoplastic, corrosion resistant.
Yellow thermoplastic, corrosion resistant.
SUITABILITY
Catalog Numbers
HBL7774WO
HBL77CM74WO
2.62"
(66.5)
2.17"
(55.1)
HBL3777
Receptacle Wall Plate & Box Cover
Description
Stainless steel 302/304, smooth.
Galvanized Steel fits 4” square, 4 11/16” or 2 gang box
.19"
(4.8)
DIA.
1.50"R
(38.0)
Catalog Number
S750
HBL50SC
2.63"
(66.8)
1.50"R
(38.0)
Closure Plug for 50A Inlets
Description
Black closure plug.
Catalog Number
HBL4892
Notes: For additional accessories see page B-74.
For technical information see page B-85.
**IP55 suitability when installed and used properly with plug and connector
body combinations.
* Not UL Listed.
®
2.19"
(55.6)
. 19"
(4.8)
DIA.
90°
3.50"
(88.9)
HBL3767
Rynite is a registered trademark of E. I. Dupont.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-33
2P 3W, 50A, 250V DC and 600V AC
Weatherproof Receptacle Cover Plates IP44
3.50"
(88.9)
90°
Locking Devices
TWIST-LOCK® Devices
3 Pole, 3 Wire, Non-Grounding
15 Ampere, 125/250 Volts
Midget TWIST-LOCK Flanged Receptacles and Plugs
X
2.06"
(52.3)
1.75"
(44.5)
X
W
W
Y
Y
NEMA ML-3R
15A 125/250V
NEMA ML-3P
15A 125/250V
Flanged Receptacles
1.00"
(25.4)
.15"
(3.8)
DIA.
1.12"
(28.4)
HBL7487N
2.06"
(52.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
Male Plugs IP20
1.19"
(30.2)
HBL7487
2.06"
(52.3)
1.75"
(44.5)
Catalog Numbers
HBL7487N
HBL7487
HBL7489
Weatherproof Boot
Cord Dia.
.300”-.430”
(7.6-10.9)
Catalog Numbers
–
HBL7485V
.281”-.421”
(7.1-10.7)
–
HBL7485
.335”-.421”
(8.5-10.7)
–
HBL7432
IP55**
SUITABILITY
Description
Seal-Tite® cover, black elastomer, for use with a HBL7485V
or HBL7485 plug when used with a HBL7484V or HBL7484
connector body when used with a flanged inlet.
1.25"
(31.8)
–
–
SUITABILITY
Description
Valise® plug, black nylon, with
insulation displacement terminals,
multiple drive screws.
Black nylon body, phenolic base,
multiple drive screw terminals,
cord grip.
Same as above, except angle
cord grip.
.97"
(24.6)
.16"
(4.1)
DIA.
Description
Exposed terminals, black nylon flange.
Exposed terminals, stainless steel flange,
Covered terminals, stainless steel flange,
accepts cord .500” (12.7) in diameter.
Catalog Number
HBL7495V
Notes: These devices are not interchangeable with any other devices in this catalog.
All male ground pins are solid and all female ground contacts have hollow sleeves.
**When installed and used properly with plug and connector body combinations.
* Not UL Listed.
1.17"
(29.7)
HBL7489
1.61"
(40.9)
1.19"
(30.2)
HBL7485V
3P 3W, 15A, 125/250V
2.00"
(50.8)
1.59"
(40.4)
1.17"
(29.7)
1.13"
(28.7)
HBL7485
1.17"
(29.7)
1.69"
(42.9)
HBL7432
B-34
HBL7495V
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
3 Pole, 3 Wire, Non-Grounding
15 Ampere, 125/250 Volts
Midget TWIST-LOCK Devices, Flanged Inlets and Connector Bodies
X
X
W
Y
Y
NEMA ML-3R
15A 125/250V
NEMA ML-3P
15A 125/250V
Flanged Inlets
Description
Exposed terminals, black nylon flange.
Exposed terminals, stainless steel flange.
Connector Bodies IP20
2.06"
(52.3)
1.75"
(44.5)
W
Catalog Numbers
–
HBL7486N
–
HBL7486
1.27"
(32.3)
HBL7486N
SUITABILITY
Description
Valise® type, black nylon, with
insulation displacement terminals,
multiple drive screws.
Black nylon body, phenolic base,
multiple drive screws, cord grip.
Same as above, except for angle
cord grip.
Cord Dia.
.300”-.430”
(7.6-10.9)
Catalog Numbers
HBL7484V
–
.281”-.421”
(7.1-10.7)
.335”-.421”
(8.5-10.7)
HBL7484
–
Weatherproof Accessories IP55**
.15"
(3.8)
DIA.
1.00"
(25.4)
HBL7433
–
2.06"
(52.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
1.00"
(25.4)
1.22"
(31)
HBL7486
SUITABILITY
Description
Seal-Tite® cover, black elastomer, for use with a HBL7484V or
HBL7484 connector body and a combination of HBL7485V or
HBL7485 plug and HBL7495V cover.
Closure cover for use with HBL7486 or HBL7486N.
Catalog Numbers
HBL7440V*
1.97"
(50.0)
1.19"
(30.2)
HBL4889*
Notes: These devices are not interchangeable with any other devices in this catalog.
All male ground pins are solid and all female ground contacts have hollow sleeves.
**IP55 suitability when installed and used properly with plug and connector
body combinations.
* Not UL Listed.
HBL7484V
2.42"
(61.5)
2.02"
(51.3)
1.13"
(28.7)
1.17"
(29.7)
HBL7484
1.69"
(42.9)
3P 3W, 15A, 125/250V
1.28"
(32.5)
1.17"
(29.7)
HBL7433
HBL7440V
HBL4889
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-35
Locking Devices
TWIST-LOCK® Devices
3 Pole, 3 Wire Non-Grounding
20 and 30 Ampere, 125/250 Volts
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
Y
1.39"
(35.2)
W
Y
1.11"
(28.2)
For Replacement Use Only
W
X
Single Flush Receptacles
1.38" 2.38" 3.61"
(34.9) (60.5) (91.6)
2.20"
(57.2)
X
Non-NEMA
20A 125/250V
UL Listed
Description
Black urea face, back wired.
Non-NEMA
30A 125/250V
UL Listed
HP
Catalog Numbers
HBL7310B
HBL3330
#6-32
TAP
1.28" (32.5)
HBL7310B
1.71"
(43.1)
1.22"
(31.0)
Insulgrip Connector Bodies IP20
1.57" 2.38" 3.61"
(39.8) (60.5)(91.6)
2.50"
(63.5)
SUITABILITY
Description
Black and white nylon.
Corrosion resistant, yellow nylon.
Note: Cord grip range .360 ”-.930 ” (9-24).
Catalog Numbers
HBL7314C
HBL3333C
HBL73CM14C
–
.97" (24.6)
#6-32
TAP
HBL3330
3.86"
(98.0)
Insulgrip Flanged Receptacles
1.97"
(50.0)
2.26"
(57.4)
Description
Nylon casing, back wired.
Catalog Numbers
HBL3326C
HBL3335C
HBL7314C
Y
2.88"
(73.2)
120°
W
Y
W
X
1.25" R
(31.8)
.19"
(4.8) 120°
DIA.
Insulgrip Plugs
IP20
Non-NEMA
20A 125/250V
UL Listed
SUITABILITY
Description
Black and white nylon.
Corrosion resistant, yellow nylon.
Note: Cord grip range .360 ”-.930 ” (9-24).
2.09"
(53.1)
2.04"
(51.8)
X
Non-NEMA
30A 125/250V
UL Listed
HP
Catalog Numbers
HBL9965C
HBL3331C
HBL99CM65C
–
3P 3W, 20A and 30A, 125/250V
HBL3326C
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
Insulgrip Flanged Inlets
Description
Nylon casing, back wired.
Note: See pages B-68 and B-69 for accessories.
HBL9965C
2.88"
(73.2)
120°
Catalog Numbers
HBL3325C
HBL3334C
1.25" R
(31.8)
.19"
(4.8)
DIA.
120°
2.09"
(53.1)
2.04"
(51.8)
CAUTION: To avoid electrical shock, review premises carefully and do not use if
slot or blade configuration (design) is already in a circuit having a rating
differing from the rating of this device.
HBL3325C
B-36
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
20 Ampere, 125/250 Volts, 3Ø 250 and 3Ø 480 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
X
G
X
W
1.70"
(43.2)
X
G
Y
G
1.23"
(31.2)
Y
Y
Z
Single Flush Receptacles,
Back and Side Wired
Z
NEMA L14-20R
20A 125/250V
UL/CSA
2 (1) HP
NEMA L15-20R
20A 3Ø 250V AC
UL/CSA
3 HP
NEMA L16-20R
20A 3Ø 480V AC
UL/CSA
5 HP
Description
Black nylon face.
Isolated ground, orange nylon face.
Catalog Numbers
HBL2410
HBL2420
IG2410
IG2420
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
HBL2430
–
.98"
(24.9)
#6-32
TAP
HBL2410
Insulgrip Connector Bodies IP20
3.86"
(98.0)
SUITABILITY
Description
Catalog Numbers
Black and white nylon.
HBL2413
HBL2423
HBL2433
Corrosion resistant, yellow nylon.
HBL24CM13 HBL24CM23 HBL24CM33
Note: Cord clamp range .3 5 ”-1.15 ” (9-29).
2.33"
(59.2 )
2.21"
(56.1)
HBL2413
3.06"
(77.7)
120°
Insulgrip Flanged Receptacles
Description
Nylon casing, back wired.
W
SUITABILITY
Description
Black and white nylon.
Corrosion resistant, yellow nylon.
HBL2436
X
G
Y
.19"
(4.8) 120°
DIA.
2.27"
(57.7)
X
G
Y
G
Y
Z
Z
NEMA L14-20P
20A 125/250V AC
UL/CSA
2 (1) HP
NEMA L15-20P
20A 3Ø 250V AC
UL/CSA
3 HP
NEMA L16-20P
20A 3Ø 480V AC
UL/CSA
5 HP
2.23"
(56.6)
HBL2416
Catalog Numbers
HBL2411
HBL2421
HBL2431
HBL24CM11 HBL24CM21 HBL24CM31
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Notes: Cord clamp range .3 5 ”-1.15 ” (9-29).
See page B-73 for Add-A-Shroud™ kit.
HBL2411
3.06"
(77.7)
Insulgrip Flanged Inlets
Description
Nylon casing, back wired.
120°
Catalog Numbers
HBL2415
HBL2425
Notes: All HP ratings are AC only.
HP ratings not in parentheses are phase to phase.
HP rating in parentheses is phase to neutral.
Only receptacles and plugs are HP rated.
See pages B-70 and B-71 for accessories.
For technical information see page B-83.
See page B-63 for switched enclosure.
Dimensions in Inches (mm)
1.34" R
(34.0)
HBL2435
www.hubbell-wiring.com
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2415
B-37
3P 4W, 20A, 125/250V, 3Ø 250 and 3Ø 480V AC
X
Insulgrip Plugs IP20
1.34" R
(34.0)
Catalog Numbers
HBL2416
HBL2426
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
20 Ampere, 125/250 Volts, 3Ø 250 and 3Ø 480 Volts AC
Watertight Safety-Shroud TWIST-LOCK System
2.91"
(73.9)
IP66
UL Listed, CSA
Certified to Type 4,
4X, & 12
SUITABILITY
X
G
3.75"
(95.3)
Watertight Safety-Shroud
Twist-Lock Receptacles
3.75"
(95.3)
1.75"
(44.5)
HBL2420SW
X
X
W
G
G
Y
Y
Y
Z
Z
NEMA L14-20R
20A 125/250V
UL/CSA
2 (1) HP
NEMA L15-20R
20A 3Ø 250V AC
UL/CSA
3 HP
NEMA L16-20R
20A 3Ø 480V AC
UL/CSA
5 HP
Description
Catalog Numbers
Gray Valox® housing and flange.
HBL2410SW HBL2420SW HBL2430SW
Note: Receptacles only fit boxes listed on page B-72.
Watertight Safety-Shroud
Connector Bodies
Description
Black Valox housing,
white Valox clamps.
2.75"
(69.9)
Catalog Numbers
HBL2413SW HBL2423SW HBL2433SW
4.38"
(111.1)
X
X
X
HBL2423SW
W
Watertight
Safety-Shroud Plugs
3P 4W, 20A, 125/250V, 3Ø 250 and 3Ø 480V AC
2.94"
(74.7)
Description
Black Valox housing,
white Valox clamp.
G
Y
G
Y
G
Y
Z
Z
NEMA L14-20P
20A 125/250V
UL/CSA
2 (1) HP
NEMA L15-20P
20A 3Ø 250V AC
UL/CSA
3 HP
NEMA L16-20P
20A 3Ø 480V AC
UL/CSA
5 HP
Catalog Numbers
HBL2411SW HBL2421SW HBL2431SW
4.50"
(114.3)
HBL2421SW
Watertight
Safety-Shroud Inlets
2.44"
(62.0)
Description
Gray Valox housing and flange.
3.75"
(95.3)
1.81"
(46.0)
Catalog Numbers
HBL2415SW HBL2425SW HBL2435SW
Notes: Only receptacles and plugs 480V AC or less are HP rated.
All HP ratings are AC only.
HP rating in parentheses is phase to neutral.
Cord grip range for plugs and connector bodies
.35 ”-1.15 ” (9-29), #16-4 Type SJ to #8-4 Type S, SO.
For technical information see page B-84.
3.75"
(95.3)
HBL2425SW
CIRCUIT-LOCK® Unfused Safety-Shroud
Mechanical Interlock for Twist-Lock® Receptacles
Description
Catalog Number
Mechanical Interlock accommodates
HBLMITL*
20A and 30A watertight Safety-Shroud receptacles.
Note: *Not shown, see pages B-64 and B-65 for complete details.
®Valox
B-38
is a registered trademark of General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
20 Ampere, 125/250 Volts, 3Ø 250 and 3Ø 480 Volts AC
Safety-Shroud TWIST-LOCK® System
X
G
Safety-Shroud Twist-Lock
Receptacles
W
3.14"
(79.8)
X
X
G
Y
G
Y
Y
Z
Z
NEMA L14-20R
20A 125/250V
UL/CSA
2 (1) HP
NEMA L15-20R
20A 3Ø 250V AC
UL/CSA
3 HP
NEMA L16-20R
20A 3Ø 480V AC
UL/CSA
5 HP
4.57"
(116.1)
Description
Catalog Numbers
Gray Valox® Angle housing, one gang. HBL2410AR HBL2420AR HBL2430AR
Gray Valox Surface mounting, one gang. HBL2410SR HBL2420SR HBL2430SR
Gray Valox Semi-flush, two gang.
HBL2410SR2 HBL2420SR2 HBL2430SR2
2.85"
(72.4)
HBL2420AR
Note: See page B-72 for box mounting application.
Housing and flange gray Valox.
1.71"
(43.4)
X
G
IP20
SUITABILITY
Insulgrip Connector Bodies
X
W
G
X
Y
G
Y
Y
Z
Z
NEMA L14-20R
20A 125/250V
UL/CSA
NEMA L15-20R
20A 3Ø 250V AC
UL/CSA
NEMA L16-20R
20A 3Ø 480V AC
UL/CSA
Description
Catalog Numbers
Black and white nylon.
HBL2413
HBL2423
Note: Cord clamp range .35 ”-1.15 ” (9-29).
4.56"
(115.8)
HBL2433
2.84"
(72.1)
HBL2420SR
X
X
W
.77"
(19.6)
X
G
Y
G
Y
Z
Z
NEMA L14-20P
20A 125/250V
UL/CSA
2 (1) HP
NEMA L15-20P
20A 3Ø 250V AC
UL/CSA
3 HP
NEMA L16-20P
20A 3Ø 480V AC
UL/CSA
5 HP
SUITABILITY
Safety-Shroud Twist-Lock
Plugs
Y
Description
Catalog Numbers
Black and white nylon body,
HBL2411S
HBL2421S
white Valox shroud.
Note: Cord clamp range .35 ”-1.15 ” (9-29).
5.12"
(130.0)
HBL2431S
5.12"
(130.0)
HBL2420SR2
3.86"
(98.0)
X
W
Insulgrip Flanged Inlets
Description
Nylon casing, back wired.
X
G
Y
X
G
Y
G
Y
Z
Z
NEMA L14-20P
20A 125/250V
UL/CSA
NEMA L15-20P
20A 3Ø 250V AC
UL/CSA
NEMA L16-20P
20A 3Ø 480V AC
UL/CSA
Catalog Numbers
HBL2415
HBL2425
2.33"
(59.2)
2.21"
(56.1)
HBL2423
HBL2435
Notes: Only receptacles and plugs 480V AC or less are HP rated.
All HP ratings are AC only.
For technical information, see page B-83.
HP rating in parentheses is phase to neutral.
2.33"
(59.2)
2.21"
(56.1)
4.12"
(104.6)
®Valox
HBL2421S
is a registered trademark of General Electric Company.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-39
3P 4W, 20A, 125/250V, 3Ø 250 and 3Ø 480V AC
IP20
G
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
30 Ampere, 125/250 Volts and 3Ø 250 Volts
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
1.70"
(43.2)
1.23"
(31.2)
X
X
G
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5)(83.3)
W
Y
G
Single Flush Receptacles,
Back and Side Wired
Y
Z
NEMA L14-30R
30A 125/250V
UL/CSA
2 (2) HP
NEMA L15-30R
30A 3Ø 250V AC
UL/CSA
3 HP
Description
Black nylon face.
Isolated ground, orange nylon face.
Catalog Numbers
HBL2710
HBL2720
IG2710
IG2720
.98"
(24.9)
#6-32
TAP
HBL2710
Insulgrip Connector Bodies IP20
2.33"
(59.2)
2.21"
(56.1)
SUITABILITY
Description
Black and white nylon.
Corrosion resistant, yellow nylon.
Note: Cord clamp range .35 ”-1.15 ” (9-29).
Catalog Numbers
HBL2713
HBL2723
HBL27CM13
HBL27CM23
3.86"
(98.0)
HBL2713
Insulgrip Flanged Receptacles
Description
Nylon casing, back wired.
3.06"
(77.7)
120°
Catalog Numbers
HBL2716
HBL2726
1.34" R
(34.0)
W
2.27"
(57.7)
Insulgrip Plugs IP20
HBL2716
3P 4W, 30A, 125/250V, 3Ø 250V AC
SUITABILITY
Description
Black and white nylon.
Corrosion resistant, yellow nylon.
2.23"
(56.6)
X
X
.19"
(4.8) 120°
DIA.
Y
G
G
Y
Z
NEMA L14-30P
30A 125/250V
UL/CSA
2 (2) HP
NEMA L15-30P
30A 3Ø 250V AC
UL/CSA
3 HP
Catalog Numbers
HBL2711
HBL2721
HBL27CM11
HBL27CM21
Notes: Cord clamp range .35 ”-1.15 ” (9-29).
See page B-73 for Add-A-Shroud™ kit.
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Insulgrip Flanged Inlets
Description
Nylon casing, back wired.
HBL2711
3.06"
(77.7)
120°
1.34" R
(34.0)
Catalog Numbers
HBL2715
HBL2725
Notes: HP ratings not in parentheses are phase to phase.
HP rating in parentheses is phase to neutral.
Only receptacles and plugs are HP rated.
See pages B-70 and B-71 for accessories.
For technical information see page B-83.
See page B-63 for switched enclosure.
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2715
B-40
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
30 Ampere, 125/250 Volts and 3Ø 250 Volts AC
Watertight Safety-Shroud TWIST-LOCK® System
IP66
SUITABILITY
UL Listed, CSA Certified to Type 4, 4X, & 12
X
G
W
Y
G
Y
Watertight Safety-Shroud
Twist-Lock Receptacles
2.91"
(73.9)
X
Z
NEMA L14-30R
30A 125/250V
UL/CSA
2 (2) HP
NEMA L15-30R
30A 3Ø 250V AC
UL/CSA
3 HP
3.75"
(95.3)
Description
Catalog Numbers
Gray Valox® housing and flange.
HBL2710SW HBL2720SW
Note: Receptacles only fit boxes listed on page B-72.
3.75"
(95.3)
HBL2710SW
Watertight Safety-Shroud
Twist-Lock Connector Bodies
Description
Black Valox housing, white Valox clamps.
Catalog Numbers
HBL2713SW HBL2723SW
Description
Black Valox housing, white Valox clamps.
G
Y
G
W
2.75"
(69.9)
X
X
Watertight Safety-Shroud
Twist-Lock Plugs
1.75"
(44.5)
Y
Z
NEMA L14-30P
30A 125/250V
UL/CSA
2 (2) HP
NEMA L15-30P
30A 3Ø 250V AC
UL/CSA
3 HP
4.38"
(111.1)
HBL2713SW
Catalog Numbers
HBL2711SW HBL2721SW
Watertight Safety-Shroud
Twist-Lock Inlets
Description
Gray Valox housing and flange.
Catalog Numbers
HBL2715SW HBL2725SW
CIRCUIT-LOCK® Unfused Safety-Shroud
Mechanical Interlock for Twist-Lock Receptacles
Description
Catalog Numbers
Mechanical Interlock accommodates
HBLMITL*
20A and 30A watertight Safety-Shroud receptacles.
Note: *Not shown, see pages B-64 and B-65 for complete details.
4.50"
(114.3)
HBL2711SW
2.44"
(62.0)
3.75"
(95.3)
1.81"
(46.0)
3.75"
(95.3)
HBL2715SW
®Valox
is a registered trademark of General Electric Company.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-41
3P 4W, 30A, 125/250V, 3Ø 250V AC
Notes: Only receptacles and plugs 480V AC or less are HP rated.
All HP ratings are AC only.
HP rating in parentheses is phase to neutral.
Cord grip range for plugs and connector bodies
.35 ”-1.15 ” (9-29), #16-4 Type SJ to #8-4 Type S, SO.
For technical information see page B-84.
2.94"
(74.7)
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
30 Ampere, 125/250 Volts and 3Ø 250 Volts AC
Safety-Shroud TWIST-LOCK® System
3.14"
(79.8)
F
X
S
Fed.Spec.
G
X
W
Y
Safety-Shroud
Twist-Lock Receptacles
4.57"
(116.1)
Description
Angle housing one gang.
Surface mounting one gang.
Semi-flush two gang.
Notes: See page B-72 for box mounting application.
Housing and flange, gray Valox®.
2.88"
(73.2)
HBL2710AR
Y
G
Z
NEMA L14-30R
30A 125/250V
UL/CSA
2 (2) HP
NEMA L15-30R
30A 3Ø 250V AC
UL/CSA
3 HP
Catalog Numbers
HBL2710AR HBL2720AR
HBL2710SR HBL2720SR
HBL2710SR2 HBL2720SR2
1.71"
(43.4)
X
X
4.56"
(115.8)
G
IP20 SUITABILITY
Insulgrip Connector Bodies
2.84"
(72.1)
Description
Black and white nylon.
Note: Cord clamp range .35 ”-1.15 ” (9-29).
HBL2710SR
Y
G
W
Y
Z
NEMA L14-30R
30A 125/250V
UL/CSA
NEMA L15-30R
30A 3Ø 250V AC
UL/CSA
Catalog Numbers
HBL2713
HBL2723
.77"
(19.6)
5.12"
(130.0)
IP20 SUITABILITY
5.12"
(130.0)
Safety-Shroud Twist-Lock Plugs
HBL2710SR2
2.33"
(59.3)
G
Y
G
W
3P 4W, 30A, 125/250V, 3Ø 250V AC
X
X
Y
Z
NEMA L14-30P
30A 125/250V
UL/CSA
2 (2) HP
NEMA L15-30P
30A 3Ø 250V AC
UL/CSA
3 HP
Description
Catalog Numbers
Black and white nylon body, white Valox shroud.
Note: Cord clamp range .35 ”-1.15 ” (9-29).
HBL2711S
HBL2721S
2.21"
(56.1)
3.86"
(98.0)
X
HBL2713
W
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
HBL2711S
Insulgrip Flanged Inlet
Description
Nylon casing, back wired.
Y
G
G
Y
Z
NEMA L14-30P
30A 125/250V
UL/CSA
NEMA L15-30P
30A 3Ø 250V AC
UL/CSA
Catalog Numbers
HBL2715
HBL2725
Notes: Only receptacles and plugs 480V AC or less are HP rated.
All HP ratings are AC only.
HP rating in parentheses is phase to neutral.
For technical information, see page B-83.
®Valox
B-42
X
is a registered trademark of General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
30 Ampere, 3Ø 480 and 3Ø 600 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
F
G
Single Flush Receptacles,
Back and Side Wired
Description
Black nylon face.
Not Fed Spec.
1.70"
(43.2)
X
X
S
Fed.Spec.
Y
G
Z
Z
NEMA L16-30R
30A 3Ø 480V AC
UL/CSA
10 HP
NEMA L17-30R
30A 3Ø 600V AC
UL/CSA
Catalog Numbers
HBL2730
HBL2740
Insulgrip Connector Bodies
IP20 SUITABILITY
Description
Black and white nylon.
Corrosion resistant, yellow nylon.
Note: Cord clamp range .35 ”-1.15 ” (9-29).
IP20 SUITABILITY
3.86"
(98.0)
2.33"
(59.3)
Catalog Numbers
HBL2736
HBL2746
Y
Description
Black and white nylon.
Corrosion resistant, yellow nylon.
X
G
G
Y
Z
Z
NEMA L16-30P
30A 3Ø 480V AC
UL/CSA
10 HP
NEMA L17-30P
30A 3Ø 600V AC
UL/CSA
Catalog Numbers
HBL2731
HBL2741
HBL27CM31 HBL27CM41
HBL2736
2.75"
(69.9)
Catalog Numbers
HBL2735
HBL2745
Notes: HP ratings listed above are AC only.
See pages B-70 and B-71 for accessories.
Only receptacles and plugs are HP rated and up to 480V AC only.
For technical information see page B-83.
See page B-63 for a switched enclosure.
www.hubbell-wiring.com
2.33"
(59.2)
2.21"
(56.1)
HBL2731
B-43
3P 4W, 30A, 3Ø 480 and 3Ø 600V AC
Insulgrip Flanged Inlets
Dimensions in Inches (mm)
2.21"
(56.1)
HBL2733
Notes: Cord clamp range .35 ”-1.15 ” (9-29).
See page B-73 for Add-A-Shroud™ kit.
Description
Nylon casing, backwired.
.98"
(24.9)
HBL2730
Catalog Numbers
HBL2733
HBL2743
HBL27CM33 HBL27CM43
X
Insulgrip Plugs
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
#6-32
TAP
Insulgrip Flanged Receptacles
Description
Nylon casing, back wired.
1.23"
(31.2)
Y
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
30 Ampere, 3Ø 480 and 3Ø 600 Volts AC
Watertight Safety-Shroud TWIST-LOCK® System
UL Listed, CSA Certified to Type 4, 4X, & 12
2.91"
(73.9)
IP66
3.75"
(95.3)
SUITABILITY
X
G
Watertight Safety-Shroud
Twist-Lock Receptacles
3.75"
(95.3)
1.75"
(44.5)
HBL2730SW
X
Y
G
Y
Z
Z
NEMA L16-30R
30A 3Ø 480V AC
UL/CSA
10 HP
NEMA L17-30R
30A 3Ø 600V AC
UL/CSA
Description
Catalog Numbers
Gray Valox® housing and flange.
HBL2730SW HBL2740SW
Note: Receptacles only fit boxes listed on page B-72.
Watertight Safety-Shroud
Twist-Lock Connector Bodies
Description
Black Valox housing, white Valox clamps.
2.75"
(69.9)
Catalog Numbers
HBL2733SW HBL2743SW
X
Y
4.38"
(111.1)
HBL2733SW
3P 4W, 30A, 3Ø 480 and 3Ø 600V AC
2.94"
(74.7)
X
G
Y
G
Z
Z
Watertight Safety-Shroud
Twist-Lock Plugs
NEMA L16-30P
30A 3Ø 480V AC
UL/CSA
10 HP
NEMA L17-30P
30A 3Ø 600V AC
UL/CSA
Description
Black Valox housing, white Valox clamps.
Catalog Numbers
HBL2731SW HBL2741SW
Watertight Safety-Shroud
Twist-Lock Inlets
Description
Gray Valox housing and flange.
4.50"
(114.3)
HBL2731SW
Catalog Numbers
HBL2735SW HBL2745SW
Notes: Only receptacles and plugs 480V AC or less are HP rated.
All HP ratings are AC only.
Cord grip range for plugs and connector bodies
.35”-1.15” (9-29), #16-4 Type SJ to #8-4 Type S, SO.
For technical information see page B-84.
2.44"
(62.0)
CIRCUIT-LOCK® Unfused Safety-Shroud
Mechanical Interlock for Twist-Lock Receptacles
3.75"
(95.3)
1.81"
(46.0)
Description
Catalog Number
Mechanical Interlock accommodates
HBLMITL*
20A and 30A watertight Safety-Shroud receptacles.
Note: *See pages B-64 and B-65 for complete details.
3.75"
(95.3)
HBL2735SW
®Valox
B-44
is a registered trademark of General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
30 Ampere, 3Ø 480 and 3Ø 600 Volts AC
Safety-Shroud TWIST-LOCK® System
X
G
Safety-Shroud
Twist-Lock Receptacles
Description
Angle housing one gang.
Surface mounting one gang.
Semi-flush two gang.
Notes: See page B-72 for box mounting application.
Housing and flange, gray Valox®.
G
Z
Z
NEMA L17-30R
30A 3Ø 600V AC
UL/CSA
Description
Black and white nylon.
Note: Cord clamp range .35”-1.15” (9-29).
X
Y
G
Description
Black and white nylon body,
white Valox shroud.
Note: Cord clamp range .35”-1.15” (9-29).
Z
Z
NEMA L17-30R
30A 3Ø 600V AC
UL/CSA
2.84"
(72.1)
X
G
Y
HBL2730SR
G
Z
Z
NEMA L16-30P
30A 3Ø 480V AC
UL/CSA
10 HP
NEMA L17-30P
30A 3Ø 600V AC
UL/CSA
.77"
(19.6)
Catalog Numbers
HBL2731S
HBL2741S
5.12"
(130.0)
X
X
G
G
Y
Z
Z
NEMA L16-30P
30A 3Ø 480V AC
UL/CSA
NEMA L17-30P
30A 3Ø 600V AC
UL/CSA
5.12"
(130.0)
HBL2730SR2
Catalog Numbers
HBL2735
HBL2745
Notes: Only receptacles and plugs 480V AC or less are HP rated.
All HP ratings are AC only.
For technical information, see page B-83.
3.86"
(98.0)
2.33"
(59.3)
2.21"
(56.1)
HBL2733
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
®Valox
HBL2731S
is a registered trademark of General Electric Company.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-45
3P 4W, 30A, 3Ø 480 and 3Ø 600V AC
Description
Nylon casing, back wired.
4.56"
(115.8)
Catalog Numbers
HBL2733
HBL2743
Y
Insulgrip Flanged Inlets
1.71"
(43.4)
Y
NEMA L16-30R
30A 3Ø 480V AC
UL/CSA
Y
Safety-Shroud Twist-Lock Plugs
2.88"
(73.2)
HBL2730AR
X
IP20 SUITABILITY
4.57"
(116.1)
Catalog Numbers
HBL2730AR HBL2740AR
HBL2730SR HBL2740SR
HBL2730SR2 HBL2740SR2
G
Insulgrip Connector Bodies
Y
NEMA L16-30R
30A 3Ø 480V AC
UL/CSA
10 HP
X
IP20 SUITABILITY
3.14"
(79.8)
X
Y
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
50 Ampere, 125/250 Volts, 3Ø 250 and 3Ø 480V AC
Receptacles, Connector Bodies, Plugs and Flanged Inlets
2.13"
(54.1)
Y
Y
Y
X
X
X
Z
W
2.69" 3.28"
(68.3) (83.3)
Receptacles
Description
Black melamine.
1.03"
(26.2)
2.44"
(62.0)
Connector Bodies
CS6369
50A 3Ø
250V AC
UL/CSA
Catalog Numbers
CS6369
CS8369
W
G
G
50A 3Ø
250V AC
UL/CSA
Description
Catalog Numbers
Nylon cover, Rynite interior.
CS6365C
CS8365C
Note: Cord clamp range .920 ”-1.2” (23.681-30.48).
CS6364C
X
G
Z
50A 3Ø
480V AC
UL/CSA
CS8165C
Flanged Inlets
6.38"
(162.0)
Description
Catalog Numbers
Zinc plated steel casing, Rynite interior. CS6375***
CS8375
Note: ***See page V-12 for weatherproof inlet.
2.59"
(65.8)
3P 4W, 50A, 125/250V, 3Ø 250 and 3Ø 480V AC
Y
Z
50A
125/250V
UL/CSA
IP20 SUITABILITY
CS8164C
X
X
Plugs
CS8169
Y
Y
2.59"
(65.8)
G
50A 3Ø
480V AC
UL/CSA
IP20 SUITABILITY
Description
Catalog Numbers
Nylon cover, Rynite® interior.
CS6364C
CS8364C
Note: Cord clamp range .920 ”-1.2” (23.681-30.48).
6.34"
(161.0)
Z
G
G
50A
125/250V
UL/CSA
CS8175
Accessories
Weatherproof Boots
CS6365C
IP55** SUITABILITY
Description
Seal-Tite® triple seal black elastomeric cover for plugs when used
in a cord set and connector bodies when used with flanged inlets.
Seal-Tite triple seal black elastomeric cover for connector bodies
when used with cord sets.
Note: Boots shown on page B-74.
3.50"
(88.9)
90°
.19"
(4.8)
DIA.
1.50"R
(38.0)
2.62"
(66.5)
Catalog Numbers
HBL7716C*
HBL7717C*
Weatherproof Receptacle Cover Plates
Description
Gray thermoplastic, corrosion resistant.
Yellow thermoplastic, corrosion resistant.
Catalog Numbers
HBL7774WO
HBL77CM74WO
2.17"
(55.1)
CS6375
Receptacle Wall Plate & Box Cover
Description
Stainless steel 302/304, smooth.
Galvanized Steel fits 4” square, 4 11/16” or 2 gang box
Catalog Number
S750
HBL50SC
Closure Plug for 50A Inlets
HBL7774WO
Description
Catalog Number
Black closure plug.
HBL4892*
Notes: For additional accessories see page B-74.
For technical information see page B-85.
**When installed and used properly with plug and connector body combination.
* Not UL Listed, CSA Certified.
®Rynite
B-46
is a registered trademark of E. I. Dupont
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
3 Pole, 4 Wire Grounding
50 Ampere, 600 Volts AC, 250 Volts DC
Receptacles, Connector Bodies, Plugs and Flanged Inlets
Important Note: Catalog numbers HBL7379, HBL7764C, HBL7765C,
HBL7958, HBL7968 are for replacement use only. See other singly rated
50A Twist-Lock® devices in this section. HBL3700 series Twist-Lock
devices do not interchange with any other devices in this section.
X
Y
Z
X
Z
Description
Black melamine.
Connector Bodies
2.69"
(68.3)
Y
G
50A 600V AC
50A 250V DC
Receptacles
2.13"
(54.1)
3.28"
(83.3)
G
50A 600V AC
50A 250V DC
Catalog Numbers
HBL3769
HBL7379
1.03"
(26.2)
IP20 SUITABILITY
2.44"
(62.0)
HBL3769
Description
Catalog Numbers
Nylon cover, Rynite® interior.
HBL3764C HBL7764C
Note: Cord clamp range .920”-1.20 ” (23.36-30.48).
6.34"
(161.0)
X
Y
Z
X
G
Plugs
Z
50A 600V AC
50A 250V DC
IP20 SUITABILITY
G
Y
2.59"
(65.8)
50A 600V AC
50A 250V DC
HBL3764C
Description
Catalog Numbers
Nylon cover, Rynite interior.
HBL3765C HBL7765C
Note: Cord clamp range .920”-1.20 ” (23.36-30.48).
6.38"
(162.0)
Flanged Inlets
Description
Zinc plated steel casing, with lift cover.
Zinc plated steel casing, without lift cover.
Accessories
Weatherproof Boots
Catalog Numbers
HBL3768
HBL7968
HBL3775
HBL7958
2.59"
(65.8)
HBL3765C
IP55* SUITABILITY
Description
Catalog Numbers
Seal-Tite® triple seal black elastomeric cover for plugs when used HBL7716C**
*
in a cord set and connector bodies when used with flanged inlets.
Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C**
*
when used with cord sets.
Description
Gray thermoplastic, corrosion resistant.
Yellow thermoplastic, corrosion resistant.
IP44* SUITABILITY
2.19"
(55.6)
.19"
(4.8)
DIA.
Catalog Numbers
HBL7774WO
HBL77CM74WO
90°
3.50"
(88.9)
HBL3768
Receptacle Wall Plate & Box Cover
Description
Stainless steel 302/304, smooth.
Galvanized Steel fits 4” square, 4 11/16” or 2 gang box
Closure Plug for 50A Inlets
Description
Black closure plug.
.19"
(4.8)
DIA.
1.50"R
(38.0)
Catalog Number
HBL4892*
Notes: For additional accessories see page B-74.
For technical information see page B-85.
**When installed and used properly with plug and connector body combination.
®Rynite
3.50"
(88.9)
90°
Catalog Number
S750
HBL50SC
is a registered trademark of E. I. Dupont.
2.62"
(66.5)
2.17"
(55.1)
HBL3775
*Not UL Listed, Not CSA Certified.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-47
3P 4W, 50A, 250V DC and 600V AC
Weatherproof Receptacle Cover Plates
2.63"
(66.8)
1.50"R
(38.0)
Locking Devices
TWIST-LOCK® Devices
4 Pole, 4 Wire Non-Grounding
20 Ampere, 3Ø Y 120/208, 277/480 and 347/600 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Plugs and Flanged Devices
1.70"
(43.2)
F
1.23"
(31.2)
X
S
Fed.Spec.
Single Flush Receptacles,
Back and Side Wired
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
Description
Black nylon face.
X
X
Y
W
W
Y
W
Y
Z
Z
Z
NEMA L18-20R
20A 3ØY
120/208V AC
UL Listed
2 HP
NEMA L19-20R
20A 3ØY
277/480V AC
UL Listed
5 HP
NEMA L20-20R
20A 3ØY
347/600V AC
UL Listed
Catalog Numbers
HBL2440
HBL2450
HBL2460
Not Fed Spec.
#6-32 TAP
.98"
(24.9)
Insulgrip Connector Bodies IP20 SUITABILITY
HBL2440
Description
Catalog Numbers
Black and white nylon.
HBL2443
HBL2453
Note: Cord clamp range .35 ”-1.15 ” (9-29).
HBL2463
Insulgrip Flanged Receptacles
2.33"
(59.2)
2.21"
(56.1)
Description
Nylon casing, back wired.
Catalog Numbers
HBL2446
HBL2456
3.86"
(98.0)
HBL2443
4P 4W, 20A, 3ØY 120/208, 277/480 and 347/600V AC
3.06"
(77.7)
W
Y
Insulgrip Plugs IP20 SUITABILITY
Description
Black and white nylon.
120°
1.34" R
(34.0)
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
HBL2466
X
X
X
W
Y
Y
W
Z
Z
Z
NEMA L18-20P
20A 3ØY
120/208V AC
UL Listed
2 HP
NEMA L19-20P
20A 3ØY
277/480V AC
UL Listed
5 HP
NEMA L20-20P
20A 3ØY
347/600V AC
UL Listed
Catalog Numbers
HBL2441
HBL2451
HBL2461
Notes: Cord clamp range .35 ”-1.15 ” (9-29).
See page B-73 for Add-A-Shroud™ kit.
Insulgrip Flanged Inlets
Description
Nylon casing, back wired.
2.23"
(56.6)
Catalog Numbers
HBL2445
HBL2455
HBL2465
HBL2446
Accessories
Wall Plates IP55** SUITABILITY
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Description
Stainless steel 302/304, smooth, single-gang.
Brass, smooth, single-gang.
Black, smooth nylon, single-gang.
Catalog Numbers
S720
B720
P720B
Weatherproof Boots IP55* SUITABILITY
HBL2441
3.06"
(77.7)
120°
1.34" R
(34.0)
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2445
B-48
Description
Seal-Tite triple seal cover for plug when used on a cord set
or when used with flush receptacles or connector body when
used with flanged inlets. Black elastomer.
Same as above except yellow.
Seal-Tite® triple seal cover for connector body, when used on
interconnecting cord sets. Black elastomer.
Same as above except yellow.
Catalog Numbers
HBL6035*
HBL60CM35*
HBL6036*
HBL60CM36*
Notes: See pages B-70 and B-71 for accessories.
HP ratings are for receptacles and plugs only and up to 480V AC only.
HP ratings are AC only.
**When installed and used properly with plug and connector body combinations.
For technical information see page B-83.
** Not UL Listed.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
4 Pole, 4 Wire Non-Grounding
30 Ampere, 3Ø Y 120/208, 277/480 and 347/600 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
X
F
X
1.70"
(43.2)
X
S
Fed.Spec.
Single Flush Receptacles,
Back and Side Wired
Description
Black nylon face.
Y
W
W
Y
W
Z
Z
Z
NEMA L18-30R
30A 3ØY
120/208V AC
UL Listed
3 HP
NEMA L19-30R
30A 3ØY
277/480V AC
UL Listed
10 HP
NEMA L20-30R
30A 3ØY
347/600V AC
UL Listed
Catalog Numbers
HBL2750
HBL2760
1.23"
(31.2)
Y
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
HBL2770
Not Fed Spec.
Insulgrip Connector Bodies IP20 SUITABILITY
Description
Catalog Numbers
Black and white nylon.
HBL2753
HBL2763
Note: Cord clamp range .35 ”-1.15 ” (9-29).
#6-32 TAP
.98"
(24.9)
HBL2750
HBL2773
3.86"
(98.0)
Insulgrip Flanged Receptacles
Description
Nylon casing, back wired.
Catalog Numbers
HBL2756
HBL2766
X
Y
HBL2776
X
W
X
W
Y
2.21"
(56.1)
2.33"
(59.2)
HBL2753
W
Y
Z
Z
Insulgrip Plugs IP20 SUITABILITY
NEMA L18-30P
30A 3ØY
120/208V AC
UL Listed
3 HP
NEMA L19-30P
30A 3ØY
277/480V AC
UL Listed
10 HP
NEMA L20-30P
30A 3ØY
347/600V AC
UL Listed
Description
Black and white nylon.
Catalog Numbers
HBL2751
HBL2761
3.06"
(77.7)
120°
1.34" R
(34.0)
HBL2771
.19"
(4.8)
DIA.
Note: Cord clamp range .35 ”-1.15 ” (9-29).
See page B-73 for Add-A-Shroud™ kit.
120°
2.27"
(57.7)
Insulgrip Flanged Inlets
Description
Nylon casing, back wired.
Catalog Numbers
HBL2755
HBL2765
2.23"
(56.6)
HBL2756
HBL2775
Notes: Horsepower ratings are for receptacles and plugs only and up to 480V AC only.
See pages B-70 and B-71 for accessories.
For technical information see page B-83.
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
HBL2751
3.06"
(77.7)
120°
1.34" R
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
2.23"
(56.6)
HBL2755
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-49
4P 4W, 30A, 3ØY 120/208, 277/480 and 347/600V AC
Z
Locking Devices
TWIST-LOCK® Devices
4 Pole, 4 Wire Non-Grounding
20 and 30 Ampere, 3Ø Y 120/208 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
W
1.71"
(43.4)
1.05" (26.7)
Z
For Replacement Use Only
Receptacles
2.50"
(63.5)
1.57" 2.38" 3.61"
(39.8) (60.5) (91.7)
Description
Black urea, back wired.
Mounted on a 4” (101.6) round metal cover.
Z
X
Y
W
Y
X
Non-NEMA
20A 3Ø Y
120/208V AC
UL Listed
Non-NEMA
30A 3Ø Y
120/208V AC
UL Listed
Catalog Numbers
HBL7410B
HBL3430
HBL7417B
–
Not Fed Spec
#6-32 TAP
1.28"
(32.0)
HBL7410B
Insulgrip Connector Bodies
IP20 SUITABILITY
Description
Black and white nylon.
1.36"
(34.6)
1.71"
(43.4)
Note: Cord grip range for devices .35 ”-1.15 ” (9-29).
1.57" 3.28" 3.61"
(39.8) (83.3) (91.7)
2.69"
(68.3)
Catalog Numbers
HBL7413C
HBL3433C
Insulgrip Flanged Receptacle
Description
Nylon casing, back wired.
Catalog Number
HBL7409C
–
#6-32 TAP
W
1.13"
(28.7)
Z
Z
X
Y
W
HBL3430
Insulgrip Plugs
3.86"
(98.0)
2.21"
(56.1)
4P 4W, 20 and 30A, 3ØY 120/208V AC
2.33"
(59.2)
IP20 SUITABILITY
Description
Black and white nylon.
Y
X
Non-NEMA
20A 3Ø Y
120/208V AC
UL Listed
Non-NEMA
30A 3Ø Y
120/208V AC
UL Listed
Catalog Numbers
HBL7411C
HBL3431C
Notes: Cord grip range for devices .35 ”-1.15 ” (9-29).
See page B-73 for Add-A-Shroud™ kit.
HBL7413C
Insulgrip Flanged Inlet
3.06"
(77.7)
120°
Description
Nylon casing, back wired.
1.34" R
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
Catalog Number
HBL7408C
–
Notes: See pages B-70 and B-71 for accessories.
For technical information on Insulgrip plugs, connector bodies and flanged
devices see page B-83.
2.23"
(56.6)
HBL7409C
3.06"
(77.7)
120°
2.75"
(69.9)
1.34" R
(34.0)
2.33"
(59.2)
2.21"
(56.1)
HBL7411C
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
2.23"
(56.6)
CAUTION: To avoid electrical shock, review
premises carefully and do not use if slot or blade
configuration (design) is already in a circuit
having a rating differing from the rating of this
device.
HBL7408C
B-50
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
4 Pole, 5 Wire Grounding
20 Ampere, 3Ø Y 120/208, 277/480 and 347/600 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
F
X
S
Fed.Spec.
Single Flush Receptacles,
Back and Side Wired
Description
Black nylon face.
Isolated ground, orange nylon face.
W
X
Y
G
W
1.70"
(43.2)
X
G
Y
W
G
Z
Z
Z
NEMA L21-20R
20A 3ØY
120/208V AC
UL/CSA
2 HP
NEMA L22-20R
20A 3ØY
277/480V AC
UL/CSA
5 HP
NEMA L23-20R
20A 3ØY
347/600V AC
UL/CSA
Catalog Numbers
HBL2510
HBL2520*
IG2510
–
1.23"
(31.2)
Y
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
HBL2530*
–
#6-32 TAP
*Not Fed Spec
.98"
(24.9)
Insulgrip Connector Bodies IP20 SUITABILITY
HBL2510
Description
Catalog Numbers
Black and white nylon.
HBL2513
HBL2523
Corrosion resistant, yellow nylon.
HBL25CM13
–
Note: Cord grip range .35 ”-1.15 ” (9-29).
HBL2533
–
2.33"
(59.3)
2.21"
(56.1)
Insulgrip Flanged Receptacles
Description
Nylon casing, back wired.
Catalog Numbers
HBL2516
HBL2526
W
Y
G
HBL2513
3.06"
(77.7)
120°
X
W
Y
G
W
Z
Z
Z
NEMA L21-20P
20A 3ØY
120/208V AC
UL/CSA
NEMA L22-20P
20A 3ØY
277/480V AC
UL/CSA
5 HP
NEMA L23-20P
20A 3ØY
347/600V AC
UL/CSA
Description
Catalog Numbers
Black and white nylon.
HBL2511
HBL2521
Corrosion resistant, yellow nylon.
HBL25CM11
–
Note: Cord grip range .35 ”-1.15 ” (9-29).
1.34" R
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
HBL2531
–
2.23"
(56.6)
HBL2516
Insulgrip Flanged Inlets
Description
Nylon casing, back wired.
Catalog Numbers
HBL2515
HBL2525
HBL2535
Notes: Only receptacles and plugs 480V AC or less are HP rated.
HP ratings for receptacles and plugs only.
All HP rating are AC only.
See pages B-70 and B-71 for accessories.
See page B-83 for technical data.
See page B-63 for switched enclosure.
2.75"
(69.8)
2.33"
(59.2)
2.21"
(56.1)
HBL2511
3.06"
(77.7)
120°
1.34" R
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
2.23"
(56.6)
HBL2515
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-51
4P 5W, 20A, 3ØY 120/208, 277/480 and 347/600V AC
Insulgrip Plugs IP20 SUITABILITY
G
HBL2536
X
X
Y
3.86"
(98.0)
Locking Devices
TWIST-LOCK® Devices
4 Pole, 5 Wire Grounding
20 Ampere, 3Ø Y 120/208 Volts AC
Watertight Safety-Shroud TWIST-LOCK® System
2.91"
(73.9)
F
S
Fed.Spec.
IP66
UL Listed, CSA
Certified to Type 4,
4X, & 12
SUITABILITY
X
3.75"
(95.3)
W
G
Y
Z
1.75"
(44.5)
3.75"
(95.3)
HBL2510SW
Watertight Safety-Shroud
Receptacle, Back Wired
NEMA L21-20R
20A 3ØY
120/208V AC
UL/CSA
2 HP
Description
Gray Valox® housing and flange.
Note: Receptacles only fit boxes listed on page B-72.
Catalog Number
HBL2510SW
Watertight Safety-Shroud
Connector Body
Description
Black Valox housing, white Valox clamps.
2.75"
(69.9)
Catalog Number
HBL2513SW
4.38"
(111.1)
X
HBL2813SW
HBL2513SW
Y
G
W
Z
NEMA L21-20P
20A 3ØY
120/208V AC
UL/CSA
2 HP
Watertight Safety-Shroud Plug
Description
Black Valox housing, white Valox clamps.
Catalog Number
HBL2511SW
Watertight Safety-Shroud
Flanged Inlet
2.94"
(74.7)
4.50"
(114.3)
HBL2511SW
Description
Gray Valox housing and flange.
Catalog Number
HBL2515SW
Notes: Cord grip range for plugs and connector bodies
.35”-1.15” (9-29), #16-5 Type S, SO to #8-5 Type S, SO.
For technical information see page B-84.
4P 5W, 20A, 3ØY 120/208V AC
2.44"
(62.0)
CIRCUIT-LOCK® Unfused Safety-Shroud
Mechanical Interlock for Twist-Lock Receptacles
3.75"
(95.3)
1.81"
(46.0)
Description
Mechanical Interlock accommodates 20A and 30A
watertight safety shroud receptacles.
Note: *See pages B-64 and B-65 for complete details.
Catalog Number
HBLMITL*
3.75"
(95.3)
HBL2815SW
HBL2515SW
®Valox
B-52
is a registered trademark of General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
4 Pole, 5 Wire Grounding
20 Ampere, 3Ø Y 120/208 Volts AC
Safety-Shroud TWIST-LOCK® System
F
S
3.14"
(79.8)
X
Fed.Spec.
W
G
Y
Z
NEMA L21-20R
20A 3ØY
120/208V AC
UL/CSA
2 HP
Safety-Shroud
Twist-Lock Receptacles
Description
Angle housing one gang.
Surface mounting one gang.
Semi-flush two gang.
4.57"
(116.1)
Catalog Numbers
HBL2510AR
HBL2510SR
HBL2510SR2
2.88"
(73.2)
HBL2510AR
HBL2810AR
Notes: See page B-72 for box mounting application.
Housing and flange gray Valox®.
1.71"
(43.4)
4.56"
(115.8)
X
W
G
Y
Z
Insulgrip Connector Body
NEMA L21-20R
20A 3ØY
120/208V AC
UL/CSA
IP20 SUITABILITY
Description
Black and white nylon.
Note: Cord clamp range .35 “-1.15” (9-29).
2.84"
(72.1)
HBL2510SR
Catalog Number
HBL2513
.77"
(19.6)
5.12"
(130.0)
X
Y
G
5.12"
(130.0)
W
HBL2510SR2
Z
Safety-Shroud Twist-Lock Plug
IP20 SUITABILITY
Catalog Number
HBL2511S
2.33"
(59.3)
2.21"
(56.1)
3.86"
(98.0)
HBL2513
X
Y
G
W
Z
2.33"
(59.3)
2.21"
(56.1)
NEMA L21-20P
20A 3ØY
120/208V AC
UL/CSA
Insulgrip Flanged Inlet
Description
Nylon casing, back wired.
Catalog Number
HBL2515
4.12"
(104.6)
HBL2511S
Notes: Only receptacle and plugs 480V AC or less are HP rated.
All HP ratings are AC only.
For technical information, see page B-83.
®Valox
is a registered trademark of General Electric Company.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-53
4P 5W, 20A, 3ØY 120/208V AC
Description
Black and white nylon body, White Valox shroud.
Note: Cord clamp range .35”-1.15 “ (9-29).
NEMA L21-20P
20A 3ØY
120/208V AC
UL/CSA
2 HP
Locking Devices
TWIST-LOCK® Devices
4 Pole, 5 Wire Grounding
30 Ampere, 3Ø Y 120/208, 277/480 and 347/600 Volts AC
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
1.70"
(43.2)
F
1.23"
(31.2)
Single Flush Receptacles,
Back and Side Wired
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
X
S
Fed.Spec.
Description
Black nylon face.
Isolated ground, orange nylon face.
W
X
X
Y
G
W
G
W
Y
G
Y
Z
Z
Z
NEMA L21-30R
30A 3ØY
120/208V AC
UL/CSA
3 HP
NEMA L22-30R
30A 3ØY
277/480V AC
UL/CSA
10 HP
NEMA L23-30R
30A 3ØY
347/600V AC
UL/CSA
Catalog Numbers
HBL2810
HBL2820
IG2810
–
HBL2830
–
#6-32 TAP
HBL2810
.98"
(24.9)
Insulgrip Connector Bodies IP20 SUITABILITY
2.33"
(59.3)
Description
Catalog Numbers
Black and white nylon.
HBL2813
HBL2823
Corrosion resistant, yellow nylon.
HBL28CM13
–
Note: Cord grip range .35 ”-1.15 ” (9-29).
2.21"
(56.1)
3.86"
(98.0)
HBL2833
–
HBL2813
4P 5W, 30A, 3ØY 120/208, 277/480 and 347/600V AC
Insulgrip Flanged Receptacles
Description
Nylon casing, back wired.
3.06"
(77.7)
120°
X
1.34" R
(34.0)
.19"
(4.8)
DIA.
Y
120°
2.27"
(57.7)
2.23"
(56.6)
HBL2816
Catalog Numbers
HBL2816
HBL2826
X
X
W
G
HBL2836
Y
G
W
Y
W
G
Z
Z
Z
Insulgrip Plugs IP20 SUITABILITY
NEMA L21-30P
30A 3ØY
120/208V AC
UL/CSA
3 HP
NEMA L22-30P
30A 3ØY
277/480V AC
UL/CSA
10 HP
NEMA L23-30P
30A 3ØY
347/600V AC
UL/CSA
Description
Black and white nylon.
Corrosion resistant, yellow nylon.
Catalog Numbers
HBL2811
HBL2821
HBL28CM11
–
HBL2831
–
Notes: Grip range .35 ”-1.15 ” (9-29).
See page B-73 for Add-A-Shroud™ kit.
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Insulgrip Flanged Inlets
Description
Nylon casing, back wired.
HBL2811
3.06"
(77.7)
120°
1.34" R
(34.0)
.19"
(4.8)
DIA.
Catalog Numbers
HBL2815
HBL2825
HBL2835
Notes: Only receptacles and plugs 480V AC or less are HP rated.
HP rating are AC only.
See pages B-70 and B-71 for accessories.
For technical information see page B-83.
See page B-63 for a switched enclosure.
120°
2.27"
(57.2)
2.23"
(56.6)
HBL2815
B-54
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
4 Pole, 5 Wire
30 Ampere, 3Ø Y 120/208 Volts AC
Watertight Safety-Shroud Twist-Lock® System
IP66
SUITABILITY
UL Listed, CSA Certified to Type 4, 4X, & 12K
F
2.91"
(73.9)
S
X
Fed.Spec.
W
G
Y
Z
NEMA L21-30R
30A 3ØY
120/208V AC
UL/CSA
3 HP
Watertight Safety-Shroud
Twist-Lock Receptacle
Description
Gray Valox® housing and flange.
Note: Receptacles only fit boxes listed on page B-72.
3.75"
(95.3)
Catalog Number
HBL2810SW
1.75"
(44.5)
3.75"
(95.3)
HBL2810SW
Watertight Safety-Shroud
Connector Body
Description
Black Valox housing, white Valox clamps.
Catalog Number
HBL2813SW
2.75"
(69.9)
X
Y
G
W
4.38"
(111.1)
Z
HBL2813SW
NEMA L21-30P
30A 3ØY
120/208V AC
UL/CSA
3 HP
Watertight Safety-Shroud Plug
Description
Black Valox housing, white Valox clamps.
Catalog Number
HBL2811SW
2.94"
(74.7)
Watertight Safety-Shroud
Flanged Inlet
Description
Gray Valox housing and flange.
Catalog Number
HBL2815SW
4.50"
(114.3)
HBL2811SW
Notes: Only receptacles and plugs 480V AC or less are HP rated.
HP ratings are AC only.
Cord grip range for plugs and connector bodies
.35 ”-1.15 ” (9-29), #16-5 Type S, SO to #8-5 Type S, SO.
For technical information see page B-84.
2.44"
(62.0)
CIRCUIT-LOCK® Unfused Safety-Shroud
Mechanical Interlock for Twist-Lock Receptacles
Description
Catalog Number
Mechanical Interlock accommodates 20A and 30A
HBLMITL*
watertight Safety-Shroud receptacles.
Note: *Not shown, see pages B-64 and B-65 for complete details.
®Valox
1.81"
(46.0)
3.75"
(95.3)
HBL2815SW
is a registered trademark of General Electric Company.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-55
4P 5W, 30A, 3ØY 120/208V AC
3.75"
(95.3)
Locking Devices
TWIST-LOCK® Devices
4 Pole, 5 Wire Grounding
30 Ampere, 3Ø Y 120/208 Volts AC
Safety-Shroud TWIST-LOCK® System
3.14"
(79.8)
F
S
X
Fed.Spec.
W
G
Y
Z
4.57"
(116.1)
2.88"
(73.2)
HBL2810AR
Safety-Shroud
Twist-Lock Receptacles
NEMA L21-30R
30A 3ØY
120/208V AC
UL/CSA
3 HP
Description
Angle housing one gang.
Surface mounting one gang.
Semi-flush two gang.
Catalog Numbers
HBL2810AR
HBL2810SR
HBL2810SR2
Notes: See page B-72 for box mounting application.
Housing and flange, gray Valox®.
1.71"
(43.4)
X
4.56"
(115.8)
W
G
Y
Z
Insulgrip Connector Body
2.84"
(72.1)
NEMA L21-30R
30A 3ØY
120/208V AC
UL/CSA
IP20 SUITABILITY
Description
Black and white nylon.
Note: Cord clamp range .35 ”-1.15 ” (9-29).
HBL2810SR
Catalog Number
HBL2813
.77"
(19.6)
5.12"
(130.0)
X
Y
G
W
Z
5.12"
(130.0)
Safety-Shroud Twist-Lock Plug
4P 5W, 30A, 3ØY 120/208V AC
HBL2810SR2
2.33"
(59.3)
NEMA L21-30P
30A 3ØY
120/208V AC
UL/CSA
3 HP
IP20 SUITABILITY
Description
Black and white nylon body, white Valox shroud.
Note: Cord clamp range .35 ”-1.15 ” (9-29).
Catalog Number
HBL2811S
2.21"
(56.1)
X
3.86"
(98.0)
Y
HBL2813
Z
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
W
G
Insulgrip Flanged Inlet
NEMA L21-30P
30A 3ØY
120/208V AC
UL/CSA
Description
Nylon casing, back wired.
Catalog Number
HBL2815
Notes: Only receptacles and plugs 480V AC or less are HP rated.
All HP ratings are AC only.
For technical information, see page B-83.
®Valox
is a registered trademark of General Electric Company.
HBL2811S
B-56
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
4 Pole, 5 Wire Grounding
20 Ampere, 250 Volts, 10 Ampere, 600 Volts AC
Receptacle, INSULGRIP® Plug and Connector Body
Z
For Replacement Use Only
Z
W
Y
X
GR
W
GR
Receptacle
Non-NEMA
20A 250V
10A 600V AC
UL/CSA
Description
Black urea, back wired.
Catalog Number
HBL3520
1.71"
(43.4)
Y
X
Non-NEMA
20A 250V
10A 600V AC
UL/CSA
3.61" 2.38" 1.57"
(91.7) (60.5) (39.8)
2.50"
(63.5)
–
#6-32 TAP
Insulgrip Plug IP20 SUITABILITY
Description
Black and white nylon.
HBL3520
Catalog Number
–
HBL3521C
Insulgrip Connector Body IP20 SUITABILITY
Description
Black and white nylon.
Catalog Number
HBL3523C
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
–
HBL3521C
Insulgrip Flanged Inlet
Description
Nylon casing, back wired.
Catalog Number
–
HBL3525C
2.33"
(59.2)
2.21"
(56.1)
3.86"
(98.0)
Insulgrip Flanged Receptacle
Description
Nylon casing, back wired.
Catalog Number
HBL3524C
HBL3523C
–
Notes: Cord grip range for plug and connector body .35 ”-1.15 ” (9-29).
See pages B-70 and B-71 for accessories.
For technical information on Insulgrip plug and connector body see page B-83.
3.06"
(77.7)
120
1.34" R
(34.0)
120
2.27"
(57.7)
CAUTION: To avoid electrical shock, review
premises carefully and do not use if slot or blade
configuration (design) is already in a circuit
having a rating differing from the rating of this
device.
2.23"
(56.6)
HBL3525C
3.06"
(77.7)
120
1.34" R
(34.0)
.19"
(4.8)
DIA.
120
2.27"
(57.7)
2.23"
(56.6)
HBL3524C
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-57
4P 5W, 20A, 250V, 10A 600V AC
.19"
(4.8)
DIA.
Locking Devices
TWIST-LOCK® Devices
4 Pole 5 Wire Grounding
30 Ampere, 250 Volts; 30 Ampere, 600 Volts AC and 20 Ampere, 3Ø Y 120/208 Volts AC 400Hz
VARILOAD® TWIST-LOCK® Receptacles, Plugs, Connector Bodies and
Flanged Inlets
#6-32 TAP
1.02"
(25.9)
3.28" 2.38" 1.72"
(83.3) (60.5) (43.7)
2.69"
(68.3)
1.27"
(32.3)
1.72"
(43.7)
In many large plants and laboratories the number of circuits of
different ratings and frequency is greater than the number of blade
configurations available in conventional wiring devices.
Prior to NEMA configuration standardization the solution was
“Variload Twist-Lock” devices with four non-interchangeable center
pin and slot configurations that can be designated to different
circuits.
HBL45305
30A, 250V AC/DC 30A, 600V AC
2.13"
(54.1)
DIA.
1.86"
(47.2)
Center Pin
Configuration
.91"
(23.1)
HBL45315
Receptacles
Plugs
Connector
Bodies
Flanged
Inlets
HBL45105
HBL45115
HBL45135
–
HBL45205
HBL45215
HBL45235
–
HBL45305
HBL45315
HBL45335
–
HBL45915
HBL45935
20A 120/208V 3Ø Y, 400 Hz
1.84"
(46.7)
DIA.
2.13"
(54.1)
DIA.
.91"
(23.1)
2.89"
(73.4)
HBL45335
HBL45905
HBL45985CL
Accessories
Plates
Description
Catalog Numbers
Brass, single-gang.
Stainless steel, single-gang.
B725
S725
Weatherproof Boots
IP55** SUITABILITY
Description
Catalog Numbers
4P 5W, Variload Devices
Seal-Tite black elastomer for Variload plugs.
HBL6027*
Seal-Tite, black elastomer for Variload connector bodies.
HBL6028*
Note: **When installed and used properly with plug and connector body combinations.
* Not UL Listed.
CAUTION: To avoid electrical shock, review
premises carefully and do not use if slot or blade
configuration (design) is already in a circuit
having a rating differing from the rating of this
device.
B-58
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
Not UL Listed, TWIST-LOCK® Devices
3 Pole, 3 Wire and 2 Pole 3 Wire
10 Ampere, 250 Volts, 15 Ampere 125 Volts
Receptacles, INSULGRIP® Connector Bodies, Flanged Devices and Plugs
3 Pole
3 Wire
2 Pole
3 Wire
For Replacement Use Only
CU
1.70"
(43.2)
CU
GR
Receptacles
Not Grounded
Not UL listed
Description
Duplex, black RTP*.
Single, black phenolic.
Grounded
Not UL listed
Catalog Numbers
HBL7580
HBL7580G
HBL7582
HBL7582G
Connector Bodies
3.28"
(83.3)
2.735"
(69.5)
IP20 SUITABILITY
Description
Insulgrip connector, black and white nylon,
multiple drive screws.
Insulgrip connector, yellow and white nylon,
multiple drive screws.
Black phenolic.
Catalog Numbers
HBL7565C
–
HBL7565CY
HBL7555
HBL7580
–
HBL7555G
Notes: Cord grip range .230 ”-.720 ” (5.8-18.3).
HBL7555 cord grip range .296 ”-.625 ” (7.5-15.9).
2.78"
(70.6)
1.41"
(35.8)
1.53"
(38.9)
Flanged Receptacles
Description
Stainless steel casing.
Catalog Numbers
HBL7557
HBL7557G
Insulgrip Plugs
IP20 SUITABILITY
Description
Black and white nylon, multiple drive screws.
Yellow and white nylon, multiple drive screws.
Note: Cord grip range .230 ”-.720 ” (5.8-18.3).
Not Grounded
Not UL listed
2.31"
(58.7)
1.94"
(49.3)
CU
Grounded
Not UL listed
1.75"
(44.4)
Catalog Numbers
HBL7567C
–
HBL7567CY
–
.16"(4.1)
1.34"
(34.0)
1.50"
(38.1)
HBL7557
Flanged Inlets
Description
Stainless steel casing.
Catalog Numbers
HBL7556
HBL7556G
Notes: See pages B-66 and B-67 for accessories.
For technical information on Insulgrip connector bodies and plugs see page B-83.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
*RTP is an abbreviation for reinforced thermoplastic.
1.53"
(38.9)
1.91"
(48.5)
HBL7567C
CAUTION: To avoid electrical shock, review premises carefully
and do not use if slot or blade configuration (design) is already in
a circuit having a rating differing from the rating of this device.
2.31"
(58.7)
1.94"
(49.3)
1.75"
(44.4)
.16"(4.1)
Dia.
1.13"
(28.7)
1.50"
(38.1)
HBL7556
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-59
Not UL Listed Devices 3P 3W, 10A, 250V, 15A, 125V
CU
HBL7565C
Locking Devices
Not UL Listed TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
20 and 30 Ampere, 250 Volts
Receptacles, INSULGRIP® Connector Bodies and Plugs
1.28"
(32.5)
#6-32
TAP
CU
2.20" 3.61"
(55.9) (91.6)
Description
Black urea, back wired.
Description
Black and white nylon.
HBL7310BG
30A 250V
Non NEMA
Not UL listed
20A 250V
Non-NEMA
Not UL Listed
Catalog Numbers
HBL7310BG HBL3330G
Insulgrip Connector Bodies
1.28"
(32.6)
1.71"
(43.1)
GR
CU
Single Flush Receptacles
2.38"
3.28" (60.5)1.38"
(34.9)
(83.3)
GR
For Replacement Use Only
1.05"
(26.7)
IP20 SUITABILITY
Catalog Numbers
HBL7314GCB HBL3333GC
1.22"
(31.0)
GR
GR
CU
CU
Insulgrip Plugs
1.57" 2.38" 3.61"
(39.8) (60.5)(91.6)
2.50"
(63.5)
#6-32
TAP
Description
Black and white nylon.
30A 250V
Non NEMA
Not UL listed
Catalog Numbers
HBL9965GCB HBL3331GC
Notes: Cord grip range .360 ”-930 ” (9-24).
See pages B-68 and B-69 for accessories.
For technical information on Insulgrip connector bodies and plugs see page B-83.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
.97" (24.6)
HBL3330G
CAUTION: To avoid electrical shock, review premises carefully and do not
use if slot or blade configuration (design) is already in a circuit having a
rating differing from the rating of this device.
3.86"
(98.0)
2.26"
(57.4)
Not UL Listed 2P 3W, 20 and 30A, 250V
IP20 SUITABILITY
20A 250V
Non-NEMA
Not UL Listed
1.97"
(50.0)
HBL7314GCB
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
HBL9965GCB
B-60
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
Not UL Listed TWIST-LOCK® Devices
3 Pole, 4 Wire
20 and 30 Ampere, 250 Volts AC
Receptacles, INSULGRIP® Connector Bodies and Plugs
GR
For Replacement Use Only
Z
Z
1.28"
(32.6)
1.05"
(26.7)
GR
X
Y
Y
X
Single Flush Receptacles
Description
Black phenolic, back and side wired.
20A 250V AC
Non-NEMA
Not UL Listed
30A 250V AC
Non-NEMA
Not UL Listed
Catalog Numbers
HBL7410BG
HBL3430G
1.57"
(39.8)
2.50" 2.38" 3.61"
(63.5) (60.5)(91.6)
#6-32 TAP
1.71"
(43.4)
HBL7410BG
Insulgrip Connector Bodies IP20 SUITABILITY
Description
Black and white nylon.
Catalog Numbers
HBL7413GCB
HBL3433GCB
GR
1.36"
(34.5)
1.71"
(43.4)
Z
X
Z
GR
Y
Y
1.57" 2.38" 3.28"
(39.8) (60.5) (83.3)
2.50"
(63.5)
X
Insulgrip Plugs IP20 SUITABILITY
Description
Black and white nylon.
20A 250V AC
Non-NEMA
Not UL Listed
30A 250V AC
Non-NEMA
Not UL Listed
#6-32 TAP
1.13"
(28.7)
Catalog Numbers
HBL7411GCB
HBL3431GCB
HBL3430G
Notes: Cord grip range .350 ”-1.150 ” (9-29).
See pages B-70 and B-71 for accessories.
For technical information on Insulgrip connector bodies and plugs
see page B-83.
The devices shown on this page are not listed by Underwriters Laboratories
Inc. and are for replacement use only in existing installations.
3.86"
(98.0)
2.33"
(59.2)
HBL7413GCB
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
HBL7411GCB
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-61
Not UL Listed 3P 4W, 20 & 30A, 250V AC
CAUTION: To avoid electrical shock, review premises carefully and do
not use if slot or blade configuration (design) is already in a circuit
having a rating differing from the rating of this device.
2.21"
(56.1)
Locking Devices
TWIST-LOCK® Devices
Switched Safety Enclosures
Switched TWIST-LOCK® and HUBBELLOCK® Enclosures
Lockable handle provides lockout
protection for greater safety and
complies with OSHA lockout
requirements.
Horsepower rated switch.
Angled 20 or 30 Amp Hubbell
Twist-Lock receptacle provides
low profile and helps control
cable arc of bend.
Large receptacle gasketless
door and hinge assembly.
Switched Enclosures
Premolded conduit entry hole
is offset to prevent water
condensation from falling
directly on interior electrical
components, while speeding
installation by making it easier
to pull conductors.
Heavy-duty internal frame
bonds conduit and all grounds
and has a DIN rail to
accommodate the switch.
Moveable feet may be used
in horizontal or vertical position
or may be removed and
premarked holes drilled for
Type 1 or 3R installations.
Hubbell innovation delivers again.
The Switched Twist-Lock and
Hubbellock Enclosures integrate a
receptacle and a switch to produce
distinct advantages for the user.
This enclosure replaces box,
switch, cover and all in a compact
design that meets Type 3R
Rainproof or 12K Dust-tight
requirements. The receptacle is
angled downward for a low profile,
and it maintains a low profile while
accommodating either a 20 or 30
Amp Twist-Lock receptacle or 30
Amp, 4 wire Hubbellock receptacle.
B-62
The enclosure can be used in top,
bottom or back feed applications.
The handle is designed to be
locked in the off position for lockout
protection.
the receptacle in a compact, nonmetallic enclosure encourages the
safe operating practice of
disconnecting at the switch rather
than the plug and receptacle.
Hubbell has developed the
Switched Safety Enclosure
because users want to be able to
disconnect higher voltage devices
confidently. Hubbell responded with
a line of Switched Safety
Enclosures for Twist-Lock and
Hubbellock receptacles. The
provision of the integral switch and
For plants and factories in a wide
variety of industries, as well as light
industrial facilities, Hubbell’s
Switched Enclosures offer an
upgrade that’s convenient,
compact and easy to install.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
Switched Enclosure
Switched TWIST-LOCK® and HUBBELLOCK® Enclosures
UL Listed, CSA Certified
Type 3R and 12K Enclosure Rating
4.88"
(124.0)
IP54
SUITABILITY
Switched Enclosure Ready for Twist-Lock® Receptacle Addition
Ideal unit for stockroom. This single unit provides the complete
enclosure ready to accept any Hubbell 20 or 30A Twist-Lock
receptacle.
Description
Switched Twist-Lock enclosure
accommodates any NEMA
2 pole, 3 wire to 4 pole, 5 wire
grounding receptacle (sold
separately).
Auxiliary contact.
Auxiliary contact.
Ratings
Amperage, voltage, and
horsepower ratings will be
determined by the choice of the
NEMA 20 or 30A Twist-Lock
receptacle selected.
Break after break NO/NC.
Break before break NO/NC.
Sw
it
Tw ched
is
En t-Lock®
clo
su
re
PSJO
CA IST
T.
OT
SSFITNO. N
XX
FIT IST XXXX
TIE I EW
H SA RQ
LAKJ QQ
SKA
OF
F
ON
CA
UT
ow ION
tos
:
istels nto Saitie
ls tiewnf wthw iet
sntof uil ioeta
AT
TE
oenlssothe sitieb
sotheNTION
oth
.
es
oetyh toe : Als
ot
enl hs wo ritwhe
iteh pt thl ta
sithe sle dithe
ithelsi toenll otehl
l tih sl lsjt
ehhll el
.
Catalog Numbers
SETL3
11.38"
(289.1)
HBLAC1
HBLAC2
4.5"
(114.3)
SETL3
Switched Enclosure Complete with
Twist-Lock Receptacle
Completely pre-wired with a Twist-Lock receptacle, these application
oriented combinations are available to satisfy your needs.
Description
Switched Twist-Lock
enclosure with a
prewired HBL2720
receptacle.
Switched Twist-Lock
enclosure with a
prewired HBL2730
receptacle.
Use
TwistNEMA
AmpLock
Config. erage Voltage
Horsepower Plug
L15-30R 30
3Ø 240V AC
3
HBL2721
L16-30R 30
3Ø 480V AC
5
Switched
Enclosure
Catalog
Numbers
SE2720A
HBL2731 SE2730A
Description
Switched enclosure for use
with 3 pole 4 wire 30A
Hubbellock receptacle
(sold separately).
Auxiliary contact.
Auxiliary contact.
Dimensions in Inches (mm)
Ratings
Amperage, voltage, and
horsepower ratings will be
determined by the choice of the
4 wire Hubbellock receptacle
selected.
Break after break NO/NC.
Break before break NO/NC.
Switched Enclosures
Switched Enclosure Ready for Hubbellock Receptacle Addition
Ideal unit for stockroom. This single unit provides the complete
enclosure ready to accept your 30A, 4 wire Hubbellock receptacle
choice.
Catalog Numbers
SEHBL3
HBLAC1
HBLAC2
www.hubbell-wiring.com
B-63
Locking Devices
TWIST-LOCK® Devices
Switched Safety Enclosures
CIRCUIT-LOCK® Unfused Safety-Shroud TWIST-LOCK®
Mechanical Interlock
Angled 20 or 30 Amp Hubbell Watertight
Safety-Shroud Twist-Lock receptacle provides
watertight, low profile and mechanical
interlock capabilities.
Lockable handle provides lockout protection for greater safety
and compliance with OSHA lockout requirements.
Enclosure back is
designed for top,
bottom or back
feed options.
Heavy-duty interlock linkage
prevents make and break
under load.
Horsepower rated switch.
Moveable feet may be used in
horizontal or vertical position.
Mechanical Interlock
Heavy-duty internal frame bonds conduit
and all grounds and has a DIN rail to
accommodate the switch.
Hubbell offers the only mechanical
interlock for Twist-Lock. This new,
unfused mechanical interlock for
watertight Safety-Shroud TwistLock integrates a watertight
receptacle with a linked
disconnect switch to provide a
mechanically interlocked
receptacle. This virtually
eliminates the possibility of
making or breaking the circuit
while under load or making a
B-64
Premolded conduit entry hole is offset to prevent water
condensation from falling directly on interior electrical
components. Also speeds installation by making it easier
to pull conductors.
casual or “lazy” connection. The
switch cannot be turned “ON”
until the plug is properly inserted
and locked, and the plug cannot
be removed until the switch is
turned “OFF.” All these protective
features are included in a
compact Type 4X hose-directed
water and corrosion resistant
enclosure that allows for top,
bottom or back feed options.
The non-metallic enclosure is
nonconductive, yet has an
www.hubbell-wiring.com
internal frame to assure ground
continuity with metallic conduit.
In addition, this interlock works
with all Safety-Shroud TwistLock plugs. The new unfused
mechanical interlock for
watertight Safety-Shroud TwistLock can be locked out as a
method of compliance with
OSHA lockout/tagout
regulations.
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK Devices
Switched Enclosure
CIRCUIT-LOCK Unfused Safety Shroud TWIST-LOCK®
Mechanical Interlock
UL Listed, CSA Certified TYPE 4,
4X and TYPE 12K Enclosure Rating
IP66
SUITABILITY
3.19"
(81.0)
4.88"
(124.0)
Ordering Information
This unit is a complete enclosure ready to accept any 20 or 30A watertight
Safety-Shroud Twist-Lock receptacle.
Description
Mechanical Interlock
accommodates 20A or 30A
watertight Safety-Shroud
Twist-Lock receptacles.
Ratings
Catalog Number
Amperage, voltage and HP ratings
HBLMITL
will be determined by the choice
of the watertight Safety-Shroud
Twist-Lock selected. Suppiled With 3/4” Hub.
11.44"
(290.6)
Accepts the following watertight Safety-Shroud Twist-Lock receptacles:
20A
Rating
2 Pole, 3 Wire
3 Pole, 4 Wire
4 Pole, 5 Wire
NEMA Config. Max.
Voltage
Reference
HP
AC
Number
Rating
120
L5-20
1
208-240
L6-20
2.5
277
L7-20
3
120/240
L14-20
2.5
240 3Ø
L15-20
5 ([email protected])
480 3Ø
L16-20
10
120/208 3ØY L21-20
3
Use Watertight
Safety Shroud
Twist-Lock
Plug Cat. No.
HBL2311SW
HBL2321SW
HBL2331SW
HBL2411SW
HBL2421SW
HBL2431SW
HBL2511SW
Receptacle
Catalog
Numbers
HBL2310SW
HBL2320SW
HBL2330SW
HBL2410SW
HBL2420SW
HBL2430SW
HBL2510SW
NEMA Config.
Voltage
Reference
AC
Number
120
L5-30
208-240
L6-30
120/240
L14-30
240 3Ø
L15-30
480 3Ø
L16-30
600 3Ø
L17-30
120/208 3ØY L21-30
Use Watertight
Safety Shroud
Twist-Lock
Plug Cat. No.
HBL2611SW
HBL2621SW
HBL2711SW
HBL2721SW
HBL2731SW
HBL2741SW
HBL2811SW
Receptacle
Catalog
Numbers
HBL2610SW
HBL2620SW
HBL2710SW
HBL2720SW
HBL2730SW
HBL2740SW
HBL2810SW
4.19"
(106.4)
HBLMITL
30A
Rating
2 Pole, 3 Wire
3 Pole, 4 Wire
4 Pole, 5 Wire
Max.
HP
Rating
1
2.5
2.5
5
10
*
5
Auxiliary Contacts
Description
Auxiliary contact.
Auxiliary contact.
Ratings
Break after break NO/NC.
Break before break NO/NC.
Catalog Numbers
HBLAC1
HBLAC2
Description
Catalog Numbers
Ground block.
Neutral block.
Replacement switch.
HBL30RGB
HBL30RNB
HBLDS3RS
Mechanical Interlock
Replacement Parts
*Notes: HP ratings listed above are AC only.
See pages B-70 and B71 for accessories.
Only receptacles and plugs are HP rated and up to 480V AC only.
For technical information see page B-87.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-65
Locking Devices
TWIST-LOCK® Devices
Accessories
for 15 Ampere 2 and 3 Wire Duplex, Single Receptacles and Flanged Devices
Single-Gang Wall Plate
Single
Rec. Plate
1.406” (35.7) Dia.
Duplex
Plate
P8
P7
Description
Brown nylon, smooth.
Ivory nylon, smooth.
Stainless steel 302/304, smooth.
Brass, smooth.
Aluminum, smooth.
Weatherproof Plates
HBL5206WO
HBL5221
Catalog Numbers
P8X
P7X
P8
P7
S8
S7
B8
B7
A8
A7
IP44 SUITABILITY
Description
Cast aluminum, for standard horizontal box mount.
Same as above except FS/FD box mount.
Cast aluminum vertical FS/FD box mount.
Gray thermoplastic, vertical standard box mount,
corrosion resistant.
Same as above except yellow.
Gray thermoplastic, vertical FS/FD box mount,
corrosion resistant.
Yellow thermoplastic, vertical FS/FD box mount,
corrosion resistant.
White thermoplastic, vertical FS/FD box mount,
corrosion resistant.
Weatherproof Plate for
15A Flanged Inlets and Receptacles
Description
Gray thermoplastic, corrosion resistant.
Catalog Numbers
HBL5205WO
–
HBL5206WO
–
–
HBL7420
HBL5222*
–
HBL52CM22*
–
HBL5221*
HBL7423WO
HBL52CM21* HBL74CM23WO
HBL52CM21W*
–
IP44 SUITABILITY
Catalog Number
WP1
Notes: All weatherproof plates listed above are UL Listed for wet and damp locations
with cover closed. Those with suffix WO are UL Listed with cover open.
See Section K for more information.
*IP20 Suitability only.
Accessories
HBL7423WO
WP1
B-66
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
Accessories
for 15 Ampere 2 and 3 Wire Plugs, Connector Bodies and Flanged Devices
Weatherproof, Seal-Tite® Triple Seal Boots
for 15A Insulgrip® Devices IP55* SUITABILITY
Description
Catalog Numbers
Black elastomer boot for plugs when used in a cord set and
HBL6023
connector bodies when used with a flange inlet.
Same as above except yellow elastomer.
HBL60CM23
Black elastomer boot for connector bodies when used in
HBL6024
cord sets.
Same as above except yellow elastomer.
HBL60CM24
*When installed and used properly with plug and connector body combinations.
HBL6023
Closure Cover
Description
For use with 3 wire 15A Twist-Lock flush or flanged receptacles.
Catalog Number
HBL7529
HBL6024
PLUGOUT® Lockout Devices
Description
Lockout device for 15A & 20A straight blade plugs.
Catalog Numbers
HLDMP
Lockout device for attachable 20 and 30A plugs, straight body
HLD
or angle types, with or without weatherproof covers.
Note: See Section U for more information on PLUGOUT Lockout Devices.
HBL7529
3.14"
(79.8)
4.22"
(107.2)
HLDMP
4.27"
(108.5)
7.27"
(184.7)
Accessories
HLD
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-67
Locking Devices
TWIST-LOCK® Devices
Accessories
for 20 and 30 Ampere 3, 4 and 5 Wire Receptacles and Flanged Devices
S720
Single-Gang Wall Plates
Rec. Plate
1.60” (40.64) Dia.
Description
Black nylon, smooth.
Stainless steel 302/304, smooth.
Brass, smooth.
Catalog Numbers
P720B
S720
B720
Weatherproof Plates
IP44 SUITABILITY
Description
Cast aluminum, for FS/FD box mounting.
Gray thermoplastic, for FS/FD box mounting, corrosion resistant.
Same as above except yellow.
HBL7425WOA
Weatherproof Plate for
Flanged Inlets and Flanged Receptacles
Description
Gray thermoplastic, corrosion resistant.
Catalog Numbers
HBL7420
HBL7425WOA
HBL74CM25WOA
IP44 SUITABILITY
Catalog Number
WP2
Notes: Weatherproof plates are UL Listed for wet and damp location with cover closed.
Those with suffix WOA are UL Listed with cover open.
Closure Cover for 3 Wire Flanged Inlets
Description
Rubber closure plug.
Note: Closure cover not UL Listed. Not CSA Certified.
Catalog Number
HBL2899
WP2
Closure Cover for 4 Wire Flanged Inlets
Description
Rubber closure plug.
Note: Closure cover not UL Listed. Not CSA Certified.
Catalog Number
HBL2898
Accessories
HBL2899
B-68
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
Accessories
for 20 and 30 Ampere, 3 Wire Plugs and Connector Bodies
Weatherproof, Seal-Tite® Triple Seal Boots
IP55* SUITABILITY
Description
Black elastomer boot for plugs when used in a cord set and
connector bodies when used in flanged inlets.
Same as above except yellow.
Black elastomer boot for connector bodies when used in a cord set.
Same as above except yellow.
Catalog Numbers
HBL6031
HBL60CM31
HBL6032
HBL60CM32
HBL6031
Angle Adapter
Description
Nylon, angle adapter for Insulgrip plugs and connector bodies,
cord grip range .325”-.930” (8.3-24).
Catalog Number
HBL3WAA
PLUGOUT® Lockout Devices
Description
Catalog Numbers
Lockout device for attachable 20 and 30A Locking plug
HLD
straight body,or angle types, with or without weatherproof covers.
Lockout device for 20 and 30A 3 wire angle plugs
HLD2
and watertight Safety-Shroud Twist-Lock plugs.
HBL6032
Notes: See Section U for more information on PLUGOUT Lockout Devices.
*When installed and used properly with plug and connector body combinations.
Insulgrip Plug and Connector Body Latching Kit
When you want to make doubly sure that plugs and connector
bodies stay connected, the Hubbell latching kit provides both
improved safety and security through a double locking feature that
makes unintentional disconnection virtually impossible – even under
high vibration situations. The plug and connector body lock once
when first connected, then again when you push the special position
locking slide into place.
HBL3WAA
Insulgrip Latching Kit
Description
For all 3 wire 20A and 30A Twist-Lock Insulgrip
plugs and connectors.
Catalog Number
SK2
6.31"
(160.3)
4.27"
(108.5)
12.5"
(317.5)
7.27"
(184.7)
Dimensions in Inches (mm)
www.hubbell-wiring.com
Accessories
HLD
HLD2
B-69
Locking Devices
TWIST-LOCK® Devices
Accessories
for 20 and 30 Ampere, 4 and 5 Wire Receptacles and Flanged Devices
S720
Single-Gang Wall Plates
Rec. Plate
1.60” (40.64) Dia.
Description
Black nylon, smooth.
Stainless steel 302/304, smooth.
Brass, smooth.
Catalog Numbers
P720B
S720
B720
Weatherproof Plates
IP44 SUITABILITY
Description
Cast aluminum, for FS/FD box mounting.
Gray thermoplastic, for FS/FD box mounting, corrosion resistant.
Same as above except yellow.
Catalog Numbers
HBL7420
HBL7425WOA
HBL74CM25WOA
Weatherproof Plate for Flanged Inlets
and Flanged Receptacles IP44 SUITABILITY
HBL7425WOA
Description
Gray thermoplastic, corrosion resistant.
Catalog Number
WP2
Notes: Weatherproof plates are UL Listed for wet and damp locations with cover closed.
Those with suffix WOA are UL Listed with cover open.
Accessories
WP2
B-70
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
Accessories
for 20 and 30 Ampere, 4 and 5 Wire Plugs and Connector Bodies
Weatherproof, Seal-Tite® Triple Seal Boots
IP55* SUITABILITY
Description
Seal-Tite triple seal cover for plug when used on a cord
set or when used with flush receptacles or connector bodies
when used with flanged inlets. Black elastomer.
Same as above except yellow.
Seal-Tite triple seal cover for connector bodies, when used on
interconnecting cord sets. Black elastomer.
Same as above except yellow.
Catalog Numbers
HBL6035
HBL60CM35
HBL6036
HBL6035
HBL60CM36
Angle Adapter
Description
Nylon, angle adapter for Insulgrip plugs and connectors,
cord grip range .350”-1.15” (8.9-29.2).
Catalog Number
HBL45WAA
PLUGOUT® Lockout Device
Description
Lockout device for attachable 20 and 30A plug straight
body or angle types, with or without weatherproof covers.
Lockout device for 20 and 30A 4 and 5 wire angle plugs and
watertight Safety-Shroud Twist-Lock plugs.
Catalog Numbers
HLD
HBL6036
HLD2
Notes: See Section U for more information on PLUGOUT Lockout Devices.
*When installed and used properly, with plug and connector body combinations.
Insulgrip Plug and Connector Body Latching Kit
When you want to make doubly sure that plugs and connector
bodies stay connected, the Hubbell latching kit provides both
improved safety and security through a double locking feature that
makes unintentional disconnection virtually impossible – even under
high vibration situations. The plug and connector body lock once
when first connected, then again when you push the special position
locking slide into place.
HBL45WAA
Insulgrip Latching Kit
Description
For all 4 and 5 wire 20 and 30A Twist-Lock Insulgrip
plugs and connectors.
Catalog Numbers
SK3
6.31"
(160.3)
4.27"
(108.5)
12.5"
(317.5)
SK3
Dimensions in Inches (mm)
HLD
www.hubbell-wiring.com
Accessories
7.27"
(184.7)
HLD2
B-71
Locking Devices
TWIST-LOCK® Devices
Safety-Shroud TWIST-LOCK® Accessories
Non-Metallic Back Box
A
B
C
D
E
F
Cubic
Hub Inch Inch
Inch Inch Inch Inch
Inch
Catalog
Description Size (mm) (mm) (mm) (mm) (mm) (mm) Capacity Number
15° Angle for 1.0* 5.67 4.44
4.05 3.91 2.35 4.92
30
BB2030N
20 and 30A (25.4) (144.0) (112.8) (102.9) (99.3) (59.7) (125.0) (76.2)
watertight
Safety-Shroud
Twist-Lock
Notes: Hub is not included; order Raco part number 1704.
This box meets IP67 requirement and Type 4X requirements when installed with
a watertight conduit hub.
BB2030N
E
Metallic Back Boxes
F
A
C
D
B
E
A
C
F
B
D
Straight Wall Box Adapter
Angle Box
Description
Adapts 20A and 30A Safety-Shroud Twist-Lock receptacles
to two gang, device mount, FD boxes.
D
E
B
48 CU. IN.
A
A
B
C
D
E
F
Cubic
Hub Inch Inch Inch Inch Inch Inch
Inch
Catalog
Description
Size (mm) (mm) (mm) (mm) (mm) (mm) Capacity Numbers
3
Back box 20
/4
5 1/8
4
4 3/16 3 3/4
3
4
30
BB201W
and 30A devices (19.1) (130.2)(101.6) (106.4) (95.3) (76.2) (101.6)
Back box 20
1
5 1/8
4
4 3/16 3 3/4
3
4
30
BB301W
and 30A devices (25.4) (130.2)(101.6) (106.4) (95.3) (76.2) (101.6)
3
Feed thru for
/4
8 1/4
3 1/16 7 9/64 4 1/2
3 3/4 –
48
FT202W
20 & 30A devices(19.1) (209.6)(77.8) (181.4) (114.3) (95.3) –
Feed thru for
1
8 1/4
3 1/16 7 9/64 4 1/2
3 3/4 –
48
FT302W
20 & 30A devices(25.4) (209.6)(77.8) (181.4)(114.3)(95.3) –
Notes: These boxes are cast aluminum, suitable for IP54 requirements and are
finished with enamel paint. These boxes withstand a 500-hour salt spray test as
well as UL raintight and external icing tests.
3.13" C
(79.5)
Catalog Number
HBL2030AP
Angle Wall Box Adapter
Description
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock
receptacles to single or two gang standard wall boxes
(4” or 411/16” square).
Catalog Number
AA2030PS
Feed-Thru Box
Accessories
HBL2030AP
AA2030PS
B-72
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
Safety-Shroud TWIST-LOCK® Devices
ADD-A-SHROUD™: The Innovation That Lets You Convert Existing INSULGRIP®
TWIST-LOCK® Plugs to Safety-Shroud TWIST-LOCK Devices
The Add-A-Shroud devices allow conversion of existing 20A and 30A
3 to 5 Wire Hubbell Insulgrip® Twist-Lock devices to a Safety-Shroud
Twist-Lock plug. These devices provide a convenient and costeffective way to convert existing Hubbell Insulgrip Twist-Lock plugs
to Safety-Shroud Twist-Lock plugs. The Safety-Shroud Twist-Lock
plug permits engagement with the Hubbell Mechanical Interlock
Enclosure which virtually prevents make and break under load.
Safety-Shroud Twist-Lock – 20 & 30 Ampere
Add-A-Shroud Catalog Number HBLSS3
For conversion of all 3 wire Hubbell Insulgrip Twist-Lock Devices.
20A, 2 Pole 3 Wire Grounding
30A, 2 Pole 3 Wire Grounding
Voltage
Rating
125
250
277V AC
480V AC
600V AC
125
250
277V AC
480V AC
600V AC
NEMA
Number
L5-20
L6-20
L7-20
L8-20
L9-20
L5-30
L6-30
L7-30
L8-30
L9-30
Hubbell Catalog Numbers
Plug
Add-A-Shroud
HBL2311
HBLSS3
HBL2321
HBLSS3
HBL2331
HBLSS3
HBL2341
HBLSS3
HBL2351
HBLSS3
HBL2611
HBLSS3
HBL2621
HBLSS3
HBL2631
HBLSS3
HBL2641
HBLSS3
HBL2651
HBLSS3
Add-A-Shroud Catalog Number HBLSS45
For conversion of all 4 & 5 wire Hubbell Insulgrip Twist-Lock Devices.
20A, 3 Pole 4 Wire Grounding
30A, 3 Pole 4 Wire Grounding
20A, 4 Pole 5 Wire Grounding
Dimensions in Inches (mm)
NEMA
Number
L14-20
L15-20
L16-20
L14-30
L15-30
L16-30
L17-30
L21-20
Hubbell Catalog Numbers
Plug
Add-A-Shroud
HBL2411
HBLSS45
HBL2421
HBLSS45
HBL2431
HBLSS45
HBL2711
HBLSS45
HBL2721
HBLSS45
HBL2731
HBLSS45
HBL2741
HBLSS45
HBL2511
HBLSS45
L22-20
HBL2521
HBLSS45
L23-20
HBL2531
HBLSS45
L21-30
HBL2811
HBLSS45
L22-30
HBL2821
HBLSS45
L23-30
HBL2831
HBLSS45
www.hubbell-wiring.com
1.57"
(39.9)
HBLSS3
2.21"
(56.1)
1.65"
(41.9)
HBLSS45
ADD-A-SHROUD™ Devices
30A, 4 Pole 5 Wire Grounding
Voltage
Rating
125/250
3Ø250V AC
3Ø480V AC
125/250
3Ø250V AC
3Ø480V AC
3Ø600V AC
3ØY 120/
208V AC
3ØY 277/
480V AC
3ØY 347/
600V AC
3ØY 120/
208V AC
3ØY 277/
480V AC
3ØY 347/
600V AC
2.04"
(51.8)
B-73
Locking Devices
TWIST-LOCK® Devices
Accessories
For 50 Ampere TWIST-LOCK Devices
Weatherproof Receptacle Lift Cover Plates for
FS/FD Box Mounting IP44 SUITABILITY
HBL7774WO
Description
Corrosion resistant, gray thermoplastic.
Same as above except yellow.
Cast aluminum.
Note: See Section K for more information on weatherproof plates.
Catalog Numbers
HBL7774WO
HBL77CM74WO
HBL7770
Receptacle Plates for FS/FD Box Mounting
Description
Cast aluminum with lift cover.
Same as above less lift cover.
HBL7770
Note: The two plates Listed above will only fit non-“CS” type 50A Twist-Lock
receptacles.
*Not UL Listed “WDL Closed.”
Weatherproof Boots
HBL7382
Catalog Numbers
HBL7382*
HBL7383
IP55** SUITABILITY
Description
Catalog Numbers
Seal-Tite® triple seal black elastomeric cover for plugs when used HBL7716C*
in a cord set and connector bodies when used with flanged inlets.
Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C*
when used with cord sets.
**When installed and used properly with plug and connector body combinations.
* Not UL Listed
Closure Cover
HBL7716C
Description
Black closure plug.
* Not UL Listed
Catalog Number
HBL4892*
Box Cover
Description
Galvanized Steel fits 4” square, 4 11/16” or 2 gang box
Catalog Number
HBL50SC
Accessories
HBL7717C
HBL4892
B-74
HBL50SC
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
HUBBELLOCK® Plugs and Connector Bodies
Features and Benefits
Three-piece thermoplastic clamp assembly with fast-lead stainless
screws provides a more consistent durable grip. Grommets provide
a sealed cable entry that protects against the entry of moisture and dust.
Superior wire terminations are assured with box terminals and
screws with pressure pads. This design captures stray wire strands
and permits more clamping pressure on the wire without
damaging it. Loosening of terminations and resulting heat build-up
are greatly reduced.
Impact resistance in the interior of the female device comes from
a strong thermoplastic material.
No “lazy” connections because a spring-loaded safety shutter
automatically ejects the plug if it hasn’t been properly locked into
the female device. This eliminates teasing of the contacts, a major
cause of contact burn-up.
Arcs are snuffed out, when devices are mated or unmated under
load, by spring-loaded safety shutter.
Longer contact life is assured by supplementary springs. Other
devices rely just on contacts themselves to provide proper
contact pressure.
Enhanced safety because access to live female contacts is
restricted by the spring-loaded safety shutter.
Positive locking is ensured by the nose of the plug being keyed into
a detent in female device. This lock is independent of the contacts
or a separate mechanical lock.
Insulated non-metallic housing enhances safety and abuse resistance.
Features and Benefits
Note: Above cut-away view and call-outs are construction elements pertaining specifically to the 30A Hubbellock series.
While the Hubbellock contact interface design applies to all, there are construction elements that are different,
depending on the amperage.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-75
Locking Devices
HUBBELLOCK® Devices
2 Pole, 3 Wire Grounding
20 Ampere, 125 Volts
Receptacle, Plug and Connector
IP30
GR
GR
SUITABILITY
#6-32
TAP
W
W
20A 125V
20A 125V
Receptacle
1.38" 2.38" 3.28"
(35.1) (60.5) (83.3)
2.50"
(63.5)
Description
Black phenolic, back wired.
Catalog Number
HBL23030
–
Plug
1.66"
(42.2)
Description
Nylon housing, thermoset interior.
HBL23030
Connector Body
Description
Nylon housing, thermoset interior.
3.22"
(81.8)
Catalog Number
HBL23032B
–
Notes: Cord clamp range for plug and connector .32”-.66” (8.12-16.5).
Devices listed above are not interchangeable with any other Hubbellock device
listed in this catalog.
1.72"
(43.7)
2.31"
(58.7)
Accessories
Weatherproof Covers
HBL23035B
Description
Gray polycarbonate for FS/FD box
mounting, corrosion resistant. IP44 SUITABILITY.
Same as above except yellow.
Cast aluminum, lift cover for indoor use only (not shown).
3.56"
(90.4)
1.72"
(43.7)
Catalog Number
–
HBL23035B
Catalog Numbers
HBL7423WO
HBL74CM23WO
HBL23007
1.63"
(41.4)
HBL23032B
2P 3W, 20A, 125V
HBL7423WO
B-76
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
HUBBELLOCK® Devices
3 Pole, 4 Wire Grounding
30 Ampere, 600 Volts AC, 20 Ampere, 250 Volts DC
Receptacles, Plugs, Connector Bodies and Inlets
Z
IP30
SUITABILITY
Z
1.75"
(44.5)
GR
Y
GR
X
X
Receptacles
30A 600V AC
20A 250V DC
30A 600V AC
20A 250V DC
Description
Black phenolic.
Weathertight, corrosion resistant, nickel plated brass
plate, for FS/FD box mounting. IP44 SUITABILITY
Aluminum angle housing, with 3/4” topped hub for
surface mounting. IP44 SUITABILITY
Catalog Numbers
HBL20403
–
HBL22CM427
–
HBL21420
1.22"
(31.0)
Y
3.28" 2.69"
(83.3) (68.3)
1.94"
(49.3)
–
1.94"
(49.3)
Connector Bodies
Description
Black nylon housing, thermoplastic interior.
Same as above except corrosion resistant.
Note: Cord clamp range .70”-1.20 ” (17.78-30.5).
4.56"
(115.8)
Catalog Numbers
HBL21414B
–
HBL21CM414B –
3.25"
(82.6)
5.31"
(134.9)
Plugs
Description
Black nylon housing, thermoplastic interior.
Same as above except corrosion resistant.
Note: Cord clamp range .70”-1.20 ” (17.78-30.5).
Catalog Numbers
–
HBL21415B
–
HBL21CM415B
Flanged Inlets
Description
Weathertight, corrosion resistant, nickel plated
brass plate, for FS/FD box mounting.
Black phenolic interior, aluminum housing, for FS/FD
box mounting (not shown).
Aluminum angle housing, with 3/4” NPT topped hub
for surface mounting.
2.69"
(68.3)
HBL21420
.88"
(22.4)
Catalog Numbers
–
HBL22CM428
–
HBL20418
–
HBL21447
5.08"
(129.0)
2.44"
(62.0)
HBL21414B
Description
Catalog Number
Switched enclosure for use with 3 pole 4 wire 30A
SEHBL3
Hubbellock receptacle. Receptacle not included.
Note: For more information on switched enclosures see page B-63.
2.33"
(59.2)
Accessories
Receptacle Plates
HBL21415B
Description
Catalog Numbers
Cast aluminum weatherproof, lift cover plate (not shown). HBL20405
302/304 stainless, single gang, smooth (not shown).
S737
Liquidtight Metallic Conduit Adapters
Description
Adapter for use with 1/2” NPT conduit fittings.
Adapter for use with 3/4” NPT conduit fittings.
4.75"
(120.7)
.88"
(22.4)
Catalog Numbers
SAB12
SAB34
4.56"
(115.8)
3.25"
(82.6)
5.31"
(134.9)
Boots
Description
“Mini” boot for Hubbellock connector body.*
“Mini” boot for Hubbellock plug.*
* Not UL Listed or CSA Certified.
Dimensions in Inches (mm)
Catalog Numbers
HBL20424B
HBL20425B
www.hubbell-wiring.com
2.69"
(68.3)
B-77
3P 4W, 30A, 600V AC, 20A, 250V DC
Switched Enclosure IP54 SUITABILITY
Locking Devices
HUBBELLOCK® Devices
3 Pole, 4 Wire Grounding
30 Ampere, 480 Volts AC
Receptacle, Plug and Connector Body
1.94"
(49.3)
SUITABILITY
3.28" 2.69"
(83.3) (68.3)
1.94"
(49.3)
GR
Y
GR
Y
X
X
Receptacle
30A 480V AC
30A 480V AC
Description
Black phenolic, red center insert.
Catalog Number
HBL20443
–
Connector Body
HBL20443
.88"
(22.4)
Z
Z
IP20
1.22"
(31.0)
Description
Red nylon housing, thermoset interior.
Note: Cord clamp range .70”-1.20 ” (17.78-30.5).
5.08"
(129.0)
Catalog Number
HBL20444B
–
Plug
2.44"
(62.0)
HBL20444B
.88"
(22.4)
Description
Red nylon housing, thermoset interior.
Note: Cord clamp range .70”-1.20 ” (17.78-30.5).
Switched Enclosure
Catalog Number
–
HBL20445B+
IP54 SUITABILITY
Description
Catalog Numbers
Switched enclosure for use with 3 pole 4 wire 30A
SEHBL3
–
Hubbellock receptacle. Receptacle not included.
Note: For more information on switched enclosures see pages B-62 and B-63.
4.75"
(120.7)
2.33"
(59.2)
HBL20445B
Accessories
Receptacle Plates
Description
Cast aluminum, weatherproof, red finish (not shown).
302/304 stainless, single gang, smooth (not shown).
Catalog Numbers
HBL20446
S737
Liquidtight Metallic Conduit Adapters
HBL20424B
Description
Adapter for use with 1/2” NPT conduit fittings.
Adapter for use with 3/4” NPT conduit fittings.
Catalog Numbers
SAB12
SAB34
Boots
3P 4W, 30A, 480V AC
HBL20425B
Description
“Mini” boot for Hubbellock connector body.
“Mini” boot for Hubbellock plug.
* Not UL Listed or CSA Certified.
+ Not CSA Certified.
Catalog Numbers
HBL20424B*
HBL20425B*
SEHBL3
B-78
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
HUBBELLOCK® Devices
3 Pole, 4 Wire Grounding
60 Ampere, 600 Volts AC
Receptacles, Plug, Connector Body and Flanged Devices
IP30
SUITABILITY
X
X
GR
1.75"
(44.5)
GR
Y
Y
Z
Z
60A 600V
60A 600V
1.84"
(46.7)
3.63"
(92.2)
Receptacles IP44 SUITABILITY
Description
Black phenolic interior with short aluminum housing
and lift cover.
Black phenolic interior with long aluminum housing
and lift cover.
Catalog Numbers
HBL26410
–
HBL26420
3.50" sq. 2.88"
(88.9) (73.2)
–
.25 DIA.
HBL26410
Connector Body
Description
Black phenolic interior with yellow thermoplastic sleeve
over steel cover.
Note: Cord clamp range .92”-1.45” (23.36-36.83).
Flanged Receptacle
4.88"
(124.0)
Catalog Number
HBL26418
–
3.50" sq. 2.88"
(88.9) (73.2)
IP44 SUITABILITY
Description
Black phenolic interior with steel housing and flange.
Catalog Number
HBL26421
–
HBL26420
Plug
4.88"
(124.0)
1.09"
(27.7)
Description
Black phenolic interior with yellow thermoplastic sleeve
over steel housing.
Note: Cord clamp range .92”-1.45” (23.36-36.83).
Catalog Number
–
HBL26419
3.19"
(81.0)
Flanged Inlet
HBL26418
Description
Black phenolic interior with steel housing and flange.
Catalog Number
–
HBL26422
3.31"
(84.1)
4.52"
(114.8)
Box and Adapter Plates
2.86"
(72.6)
Note: Straight or angle adapter plate must be used when mounting a 60A
receptacle to HBL26401 box.
HBL26421
4.81"
(122.2)
Kellems® Cable Grip
Catalog Number
H660A
4.50"
(114.3)
3.88"
(98.6)
3.03"
(77.0)
4.50"
(114.3)
3.88"
(98.6)
2.88" 3.88"
(73.2) (98.6)
4.50"
(114.3)
HBL26419
3.88" 4.50"
(98.6) (114.3)
2.18"
(55.4)
Dimensions in Inches (mm)
2.73"
(69.3)
3.94"
(100.1)
4.13"
(104.9)
3.50"
(88.9)
2.69"
(68.3)
4.50" 3.88"
(114.3) (98.6)
.22"
(5.6) .41"
(10.4)
2.88"
(73.2)
3.53"
(89.7)
HBL26402
1.09"
(27.7)
1.50" NPT
HBL26401
www.hubbell-wiring.com
HBL26422
B-79
3P 4W, 60A, 600V AC
Cord Dia.
.83”-1.00”
(21.1-25.4)
4.50"
(114.3)
3.88"
(98.6)
HBL26404
4.13"
(104.9)
3.50"
(88.9)
2.69"
(68.3)
Description
Catalog Numbers
Box, cast aluminum, only for 60A Hubbellock® receptacles.HBL26401
Straight adapter plate.
HBL26402
45° adapter plate.
HBL26404
Description
Cable grip (not shown).
3.63"
(92.2)
Locking Devices
HUBBELLOCK® Devices
4 Pole, 5 Wire Grounding
30 Ampere, 600 Volts AC, 20 Ampere, 250 Volts DC
Receptacles, Plug and Connector Body
4- #6-32
SCREWS
SUITABILITY
Receptacles
Description
Black phenolic interior, aluminum housing,
blue finish, for FS/FD box mounting.
Black phenolic interior, aluminum weatherproof housing,
blue finish, for FS/FD box mounting. IP44 SUITABILITY
4.56" 3.25"
(115.8) (82.6)
1.66"
(42.2)
2.48"
(49.3)
Z
W
Y
GR
W
GR
Y
X
X
30A 600V AC
20A 250V DC
30A 600V AC
20A 250V DC
Catalog Numbers
HBL25403
–
HBL25250
–
Connector Body
HBL25403
4- #6-32
SCREWS
Z
IP30
2.84"
(72.1)
1.88"
(47.8 )
Description
Black nylon housing, thermoplastic interior.
Note: Cord clamp range .76”-1.20 ” (19.30-30.4).
3.00"
(76.2)
Catalog Number
HBL25414B
–
Plug
Description
Black nylon housing, thermoset interior, steel shroud.
Note: Cord clamp range .76”-1.20 ” (19.30-30.4).
4.56" 3.25"
(115.8) (82.6)
Catalog Number
–
HBL25415B
Liquidtight Metallic Conduit Adapters
Description
Adapter for use with 1/2” NPT conduit fittings.
Adapter for use with 3/4” NPT conduit fittings.
1.88"
(47.8 )
2.84"
(72.1)
HBL25250
.88"
(22.4)
5.91"
(150.1)
2.5"
(63.5)
4P 5W, 30A, 600V AC, 20A, 250V DC
Catalog Numbers
SAB12
SAB34
2.69"
(68.3)
HBL25414B
.88"
(22.4)
4.75"
(120.7)
2.50"
(63.5)
2.33"
(59.2)
HBL25415B
SAB12, SAB34
B-80
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
HUBBELLOCK® Devices
4 Pole, 5 Wire Grounding
60 Ampere, 600 Volts AC
Receptacle, Plug, Connector Body and Flanged Devices
IP30
X
GR
SUITABILITY
X
W
W
Y
Z
Description
Black phenolic interior with long aluminum housing with
lift cover and blue finish. IP44 SUITABILITY
3.63"
(92.2)
Z
60A 600V AC 60A 600V AC
Receptacle
4.88"
(123.9)
GR
Y
Catalog Number
HBL26520
–
3.50"
(88.9)
sq.
2.88"
(73.2)
HBL26520
Connector Body
Description
Black phenolic interior with blue thermoplastic sleeve over
steel cover.
Note: Cord clamp range 1.00”-1.50 ” (25.40-38.10).
Catalog Number
HBL26516
–
5.44"
(138.2)
1.09"
(27.7)
3.19"
(81.0)
Flanged Receptacle
Description
Black phenolic interior with steel housing and flange
with blue finish.
HBL26516
Catalog Number
HBL26521
–
4.53"
(102.13)
Plug
Description
Black phenolic interior with blue thermoplastic sleeve and
steel housing.
Note: Cord clamp range 1.00”-1.50 ” (25.40-38.10).
Catalog Number
–
HBL26519
2.86" 4.12"
(72.6) (104.6)
2.69"
(68.3)
3.31"
(84.1)
HBL26521
Flanged Inlet
Description
Black phenolic interior with steel housing and flange
with blue finish.
Catalog Number
–
HBL26522
Box and Adapter Plates
Catalog Numbers
HBL26401
HBL26402
HBL26404
Note: Straight or angle adapter plate must be used when mounting a 60A receptacle
to HBL26401 box.
1.50" NPT
Dimensions in Inches (mm)
3.94"
(100.1)
3.50"
(88.9)
4.13"
(104.9)
Catalog Number
H660A
HBL26522
4.50"
(114.3)
3.88"
(98.6)
3.88" 4.50"
(98.6) (114.3)
HBL26401
2.73"
(69.3)
4P 5W, 60A, 600V AC
Cable Range
.83”-1.00”
(21.1-25.4)
4.50"
(114.3)
3.88"
(98.6)
2.18"
(55.4)
HBL26519
2.69"
(68.3)
Cable Grip
Description
Cable grip (not shown).
1.09"
(27.7)
3.03"
(77.0)
Description
Box, cast aluminum, only for 60A Hubbellock® receptacles.
Straight adapter plate.
45° adapter plate.
Kellems®
4.81"
(122.2)
4.50"
(114.3)
3.88"
(98.6)
2.88" 3.88"
(73.2) (98.6)
4.50"
(114.3)
4.50" 3.88"
(114.3) (98.6)
.22"
(5.6) .41"
(10.4)
2.88"
(73.2)
3.53"
(89.7)
HBL26404
HBL26402
www.hubbell-wiring.com
B-81
Locking Devices
Not UL Listed, HUBBELLOCK® Devices
2 Pole, 3 Wire Grounding
20 Ampere, 125 Volts AC or DC, 10 Ampere, 250 Volts DC, 480 Volts AC
Receptacle, Plug and Connector Body
IP30
1.66"
(42.2)
Y
Y
GR
GR
SUITABILITY
X
X
20A 125V
20A 125V
Receptacle
2.50"
(63.5)
1.38" 2.38"
(35.1) (60.5)
3.28"
(83.3)
Description
Black phenolic, back wired.
Catalog Number
HBL23000G
–
Plug
Description
Nylon housing, thermoset interior.
#6-32
TAP
HBL23000G
Connector Body
Not UL Listed 2P 3W, 20A, 125V AC or DC, 10A, 250V DC, 480V AC
2.31"
(58.7)
1.72"
(43.7)
3.22"
(81.8)
Description
Catalog Number
Nylon housing, thermoset interior.
HBL23002GB
Note: Cord clamp range for plug and connector .32”-.66” (8.12-16.5).
–
Accessories
Weatherproof Covers
HBL23005GB
3.56"
(90.4)
1.72"
(43.7)
Catalog Number
–
HBL23005GB
1.63"
(41.4)
Description
Gray polycarbonate for FS/FD box
mounting, corrosion resistant. IP44 SUITABILITY.
Same as above except yellow.
Cast aluminum, lift cover for indoor use only (not shown).
Catalog Numbers
HBL7423WO
HBL74CM23WO
HBL23007
HBL23002GB
B-82
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices and Watertight Safety Shroud Devices
Technical Information
15-30 Ampere Twist-Lock, 20-30 Ampere Safety-Shroud Twist-Lock
Specifications
Listings
Listed to UL Standard 498 (Attachment Plugs and Receptacles).
Fed. Spec W-C-596 (Insulgrip and Safety-Shroud).
Certified to CSA Standard C22.2 No.42 (General Use Receptacles, Attachment
Plugs and Similar Wiring Devices).
Materials
Part
Plugs and Connector
Bodies (Insulgrip®)
Blade/Contact Carrier
Terminal Retainer
Cover (Housing)
Cord Clamp
Dust Shield
Blades/Contacts
Terminal Clamp
Terminal Screws
Grounding Screw
Cord Clamp Screws
Body Holding Screws
Materials
Part
Materials
20-30A
15-30A
Safety-Shroud Receptacles
Angle, Surface Semi-Flush
Housing and Mounting Flange
Mounting Plate
(Angle Housing Only)
Body Contact Carrier
Terminal Retainer
Body Holding Screws
Contact Springs
Spring Binding Plate
Terminal Clamp
Gray Valox®
Galvanized steel
Natural (white) nylon
Clear polycarbonate
Black nylon (yellow in “CM”
devices)
Natural (white) nylon
EPDM
Brass
Cold rolled steal – nickel plated
15A (8-32), 20-30A (10-32) Brass
(white finish on neutral screw
when used)
Brass (green finish)
Steel – zinc plated
Steel – zinc plated
Flanged Inlet/Receptacles
15-30A
Flanged Casing
Blade/Contact Carrier
Terminal Retainer
Blades/Contacts
Drive Screws
Terminal Clamp
Terminal Screws
Natural (white) nylon
Natural (white) nylon
Clear polycarbonate
Brass
Steel – zinc plated
Cold rolled steel – nickel plated
15A (8-32), 20-30A (10-32) Brass
(white finish on neutral screw
when used)
Brass (green finish)
Nickel plated brass
Round head screws
15A: 6-32, 3/8” long
20A & 30A: 8-32, 7/16” long
Grounding Screw
Mounting Screws
Screw Sizes
15A
Cover(Top)
Base
Contact Springs
Clamp
Ground Contact
Ground Shunt
Bridge (Mounting Strap)
Nylon (Black) Nylon (Black)
RTP (Black)
RTP (Natural)
.031” Brass
.040” Brass
.031” Brass
.040” Brass
.031” Brass
.040” Brass
–
.015” Brass
.050” Steel-zinc
–
plated
–
.050” Brass
–
.040” Brass
Brass (8-32)
Brass (10-32)
(white finish on
neutral screw
when used)
Brass (Green) Bronze (Green)
Steel-zinc plated Steel-zinc plated
Stainless steel Stainless steel
(Used only on
IG receptacle)
End Plates (Mounting)
Back Plate
Terminal Screws
Grounding Screw
Flat Head Mounting Screws
Auto Ground Clip
20A & 30A
Grounding Screw
Mounting Plate Screws
Wall Plate Mounting Screws
Safety-Shroud Twist-Lock Plug 20-30A
Insulgrip Plug with Safety-Shroud installed
Safety-shroud
White Valox
Cord Clamp
White nylon
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Fed. Spec.
Mechanical
Cord Accommodation
(Plugs and connectors only)
Cord Grip Accommodation
(Insulgrip)
Terminal Identification
Terminal Accommodation
Product Identification
Round portable service cords of
diameters commensurate with the
device rating as defined in UL
Standard 62, CSA C22.2 No. 49.
15A: .230”-.720” (5.8-18.3);
20A & 30A 3W: .360”-.930” (9-24);
20A & 30A 4W-5W: .350”-1.150” (9-29).
Terminals identified in accordance
with UL 498 (X, Y, Z, White, Green).
20A & 30A,#16- #8 AWG.
15A, #18-#10 AWG
Ratings are a permanent part of the
device housing.
Environmental
Flammability (Enclosure)
Plugs, Connectors,
Flanged Receptacles
& Flanged Inlets
Receptacles (Box Mount)
Operating Temperatures
®Valox
Dimensions in Inches (mm)
Withstands 2,000V minimum.
600 Volts RMS.
Certified for current interrupting at
full rated current.
Max 30°C temperature rise at full
rated current after 250 cycles of
overload at 200% of rated current
at a power factor of 75%.(WC 596)
HB or better per UL94/CSA 22.2 No. 0.17.
Specifications
Receptacle, Single
Terminal Screws
Natural (white) nylon
Clear polycarbonate
Steel, zinc plated
Brass
Brass
Steel, nickel plated .080” curved,
scalloped
10-32 Brass (white finish on
neutral screw when used)
Brass (green finish)
Steel, zinc plated
Steel, zinc plated
V2 or better.
Maximum Continuous 75° C
Minimum -40° C (w/o impact).
is a registered trademark of General Electric Company.
www.hubbell-wiring.com
B-83
Locking Devices
Watertight Safety-Shroud TWIST-LOCK® Devices
Specifications
20 & 30 Ampere
Specifications
Listings
Listed to UL Standard 498 (Attachment Plugs and Receptacles).
Certified to CSA Standard No.42 (General Use Receptacles, Attachment Plugs and Similar Wiring Devices).
Fed. Spec. WC-596.
UL Listed, CSA Certified to Type 4, 4X and Type 12.
Part
Watertight Safety-Shroud™ Plug (Insulgrip®)
Materials
20 and 30A
Blade Holder
Terminal Retainer
Cover (Housing)
Cord Clamp
Blades
Terminal Clamp
Terminal Screws
Grounding Screw
Cord Clamp Screws
Body Holding Screws
Closure Cap and Strap
Natural (white) nylon
Clear polycarbonate
Black Valox®
White Valox
Brass
Steel, nickel plated .080” curved scalloped
10-32 brass (white finish on neutral screw when used) multiple drive head
Brass (green finish) combination head
Stainless steel 302/304, combination head
Stainless steel 302/304, combination head
Neoprene EPDM Blend
Watertight Safety-Shroud Connector (Insulgrip)
20 and 30A
Body Contact Carrier
Terminal Retainer
Contact Spring
Spring Binding Plate
Cover (Housing)
Cord Clamp
Terminal Clamp
Terminal Screws
Grounding Screw
Cord Grip Screws
Body Holding Screws
Closure Cap and Strap
Natural (white) nylon
Clear polycarbonate
Brass
Brass
Black Valox
White Valox
Steel, nickel plated .080” curved scalloped
10-32 brass (white finish on neutral screws when used) multiple drive head
Brass (green finish) combination head
Stainless steel 302/304, combination head
Stainless steel 302/304, combination head
Polypropylene with Neoprene gasket
*Watertight Safety-Shroud Receptacle, Single
20 and 30A
Housing and Flange
Body Contact Carrier
Terminal Retainer
Drive Screws
Contact Spring
Spring Binding Plate
Terminal Clamp
Flange Gasket
Lid Gasket
Cover Hinge Pin
Cover Spring
Terminal Screws
Grounding Screw
Mounting Screws
Gray Valox
Natural (white) nylon
Clear polycarbonate
Steel, zinc plated
Brass
Brass
Steel, nickel plated .080” curved, scalloped
Closed-cell neoprene foam
Closed-cell neoprene foam
Stainless steel 302/304
Stainless steel 302/304
10-32 brass (white finish on neutral screw when used) multiple drive head
Brass (green finish) combination head
Stainless steel 302/304 combination head
Watertight Safety-Shroud Flanged Inlet
20 and 30A
Housing and Flange
Blade Holder
Terminal Retainer
Blades
Drive Screws
Terminal Clamp
Terminal Screws
Grounding Screw
Closure Cap
Mounting Screws
Gray Valox
Natural (white) nylon
Clear polycarbonate
Brass
Steel, zinc plated
Steel, nickel plated .080” curved scalloped
10-32 brass (white finish on neutral screw - when used) multiple drive head
Brass (green finish) combination head
Neoprene EPDM blend
Stainless steel 302/304 combination head
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
600 Volts RMS.
Certified for current interrupting at full rated current.
Max 30 deg. temperature rise at full rated current after 250 cycles of overload at
200% of rated current at a power factor of 75%.(WC 596)
Mechanical
Specifications
Cord Accommodation
(Plugs and connectors only)
Cord Grip Accommodation
Terminal Identification
Terminal Accommodation
Product Identification
Round portable service cords of diameters commensurate with the device rating
as defined in UL Standard 62, CSA C22.2 No. 49.
20 and 30A, 3W: .32”-.93” (8.0-24.0mm) #16-3 Type SJ-#8-3 Type S,SO;
20 and 30A, 4W: .35”-1.15” (9.0-29.0mm) #16-4 Type SJ-#8-4 Type S, SO;
20 and 30A, 5W: .35”-1.15” (9.0-29.0mm) #16-5 Type S,SO - #8-5 Type S,SO.
Terminals identified in accordance with UL 498 (X, Y, Z, White, Green).
#16- #8 AWG solid or stranded wire.
Ratings are a permanent part of the device blade holder, and are also labeled on device
color coded by voltage, visible in use. Catalog No. I.D. is on device visible in use.
Environmental
Moisture Resistance
Flammability (Enclosure)
Operating Temperatures
Type 4, 4X, 12, IP66 suitability.
V0 per UL94 or CSA 22.2 No. 0.17
Maximum Continuous 75°C; Minimum -40°C (w/o impact).
*Suitable for use as a flanged receptacle.
®Valox
B-84
is a registered trademark of General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
TWIST-LOCK® Devices
Technical Information
50 Ampere
TWIST-LOCK Listing and Specifications
Specifications
Listings
Listed to UL Standard 498 (Attachment Plugs and Receptacles).
Certified to CSA Standard No. 42 (General Use Receptacles, Attachment Plugs and Similar Wiring Devices).
Materials
Part
Materials
Part
Materials
Plug (Twist-Lock)
Blade Holder
Power Blades
Terminal Set Screw
Terminal Retainer
Front & Rear (housing)
Cord Clamp
50A
Rynite® (black)
Brass
Stainless steel
Rynite
Supertough nylon
Rynite (white)
Ground Contact
Seal Cup
Cord Grip crews
Seal
Flanged Inlet
Flanged Casing
Blade Holder
One piece copper/nickel
Nylon
302/304 Stainless steel
Neoprene
50A
.062” Steel, zinc plate
Phenolic
Seal
Seal Cup
Box Terminal
Latches
Ground Contact Spring
Cord Clamp Screws
Shroud
Connector (Twist-Lock)
Contact Nose
Terminal Retainer
Terminal Set Screw
Contact Spring
Assembly Ring
Front & Rear (housing)
Latches
Cord Clamp
Box Terminal
Contact Holder
Neoprene
Nylon
Copper
Supertough nylon
One piece copper/nickel
302/304 Stainless steel
302/304 Stainless steel
50A
Nylon (black)
Rynite (black)
302/304 Stainless steel
Brass
302/304 Stainless steel
Supertough nylon (black)
Supertough nylon (white)
Rynite (white)
Copper
Rynite (black)
Pressure Screws
Blades
Ground Spring
Terminals
Grounding Terminal
Round Head Screws
Receptacle
Body
Face
Contact Springs
Contact Binding Plates
Ground Contact
Insulator
Bridge (Mounting Strap)
Pressure Screws
Terminals
Casing
Center Pin (CS Devices)
Steel, zinc plate
.100” Brass
.025” Bronze
.050” Steel, brass finish
.062” Copper, green finish
Steel, zinc plate
50A
Phenolic
Phenolic
.100” Brass alloy
.100” Brass
.031” Brass
.093” Laminated phenolic
.062” Steel, zinc plate
Steel, zinc plate
.050” Steel
.062” Steel, zinc plate
Steel, zinc plate
Product Identification
Ratings
Catalog No.
Molded into face for all devices and stamped into stainless steel shroud on plug devices.
Molded into face for plug and connector bodies and stamped into stainless steel shroud on plug devices.
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
#10 AWG min. -#6 AWG max.
.750”-1.150” (19.1-29.2).
Environmental
Flammability
UL 94 V0 for Receptacles and Inlets. HB or better for Plugs and Connectors.
Operating Temperatures
Maximum continuous 75°C; minimum – 40°C (w/o impact).
Please consult the factory for product dimensions and specifications for other products listed in this catalog.
Rynite is a registered trademark of E. I. Dupont.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-85
Specifications
Mechanical
Terminal Accommodation
Cord Grip Accommodation
Withstands 2,000V minimum.
600 Volts RMS.
Certified for current interrupting at full rated current.
Max. 30°C temperature rise at full rated current after 50 cycles of overload at
150% rated DC current (UL 498)
Locking Devices
Switched Safety Enclosures
Technical Information
Switched TWIST-LOCK® and HUBBELLOCK® Enclosures
Specifications
Typical Specifications
Manufacturer’s Identification
Description
Electrical Type
Rating
Configuration
Enclosure Type
Enclosure Material
Materials
Part
Base
Top
Handle
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Frame
Lift Cover
Enclosure Screws
Hinge Spring and Pin
Hubbell SETL3/SEHBL3-SE2730A.
Lockable Switched Enclosure.This unit is a complete enclosure ready
to accept any 20 or 30A Twist-Lock or 30A Hubbellock receptacle.
2 Pole + Earth through 4 Pole & Earth.
20 or 30A, 125V through 3ØY 347/600V AC.
NEMA Locking L5-20R through L23-30R.
Outdoor – Type 3R (Rainproof, Sleet, External Ice), IP54 suitability.
Indoor – Type 12K (Dust-tight, Falling Dirt, Noncorrosive Liquids,
with Knockout).
Non-metallic enclosure suitable for metallic conduit.
Materials
Valox®/Makroblend®
Valox/Makroblend
Valox/Makroblend
Zinc 3 /4” watertight
Neoprene
Valox/Makroblend
Molded neoprene
Galvanized steel
Valox/Makroblend
Stainless steel 300 series
Stainless steel 300 series
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand
Operations
Mechanical
Impact Resistance
Terminal Identification
Product Identification
Weight
Mounting
Environmental
Moisture Resistance
Specifications
Flammability
Operating Temperature
UV Resistance
Withstands 3,000V minimum.
600V RMS.
Certified for current interrupting at full rated current and voltage.
Suitable for use on a circuit capable of delivering not more than 10,000
RMS symmetrical amperes at the voltage rating of the receptacle.
Mechanical 10,000 cycles;
electrical 6,000 cycles.
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Identification and ratings are part of external label and receptacle face.
3.5 pounds.
External fully adjustable feet.
Outdoor – Type 3R (Rainproof, Sleet, External Ice), IP54 suitability.
Indoor – Type 12K (Dust-tight, Falling Dirt, Noncorrosive Liquids,
with Knockout).
UL94 – 5 VA and V0 classification.
Maximum continuous +75°C.
Minimum continuous -40°C.
All materials are UV stabilized.
This device provdes on/off switched control of a plug connected load and includes lockout provision: ON-OFF control knob (in the
OFF position) accepts up to a 5 /16 inch (8.0) diameter shackle of suitable padlock lockout device to isolate energy from the
receptacle and cord connected equipment as a method of compliance to OSHA Lockout/Tagout Regulation 29CRF Part 1910.147.
®Makroblend
®Valox
B-86
is a registered trademark of Miles.
is a registered trademark of General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Locking Devices
Switched Safety Enclosures
Technical Information
CIRCUIT-LOCK® Unfused Safety-Shroud TWIST-LOCK
Mechancial Interlock
Specifications
Typical Specifications
Manufacturer’s Identification
Description
Electrical Type
Rating
Enclosure Type
Enclosure Material
Materials
Part
Base
Top
Handle
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Frame
Enclosure Screws
Hubbell HBLMITL.
CIRCUIT-LOCK Mechanical Interlock.
2 Pole + Earth through 4 Pole & Earth.
Up to 30A, 600V AC 3Ø.
Outdoor-4X (Watertight, Washdown);
Indoor-12K (Dust-tight, Falling Dirt and noncorrosive liquids with
knockout. IP66 suitability.
Non-metallic enclosure suitable for metallic conduit.
Material
Valox®
Valox
Valox
Zinc 3 /4” watertight
Neoprene
Valox
Neoprene
Galvanized steel
Stainless steel 300 series
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand Rating
Operations
Mechanical
Impact Resistance
Terminal Identification
Product Identification
Weight
Mounting
Environmental
Moisture Resistance
Flammability
Operating Temperature
UV Resistance
In accordance with UL 746C.
In accordance with UL, CSA.
Identification & ratings are part of the external label & receptacle face.
3.5 pounds.
External full adjustable feet.
Outdoor – 4X (Hose-Directed Water, Corrosion Resistance), IP66 suitability.
Meets UL 94V0 material classification.
Maximum continuous +75°C;
Minimum continuous -40°C.
All exposed materials are UV stabilized.
Specifications
®Valox
Withstands 3,000V Min.
600V RMS.
Certified for current interrupting at full rated current voltage.
Suitable for use on a circuit capable of delivering not more than 10,000
RMS symmetrical amperes at the voltage rating of the receptacle.
Mechanical 10,000 cycles;
Electrical 6,000 cycles.
is a registered trademark of General Electric Company.
Dimensions in Inches (mm)
www.hubbell-wiring.com
B-87
Locking Devices
TWIST-LOCK® Devices
Technical Information
VALISE® Plugs and Connectors
Specifications
Plugs
Typical Specification- Catalog No. HBL4723VY.
Manufacturer’s Identification - Hubbell HBL4723VY.
Description - Straight Body Plug
Type – 2 Pole, 3 Wire, Grounding
Rating – 15 and 20A 125V, 250V, & 277V AC, 30A 125 & 250V
Certification – UL Listed File E1706, CSA Certified
File LR280C
IP Suitability – IP20
Part
Plug
Housing
Blades
Ground Blade
Terminal Screws
Cable Inserts
Terminal Clamps
Body Holding Screws
Description
15, 20 & 30A
Nylon
Brass
Brass
Steel multiple drive
Polyphenylene Oxide
CR Steel
Steel multiple drive
Connector Bodies
Part
Connector
Typical Specification- Catalog No. HBL4729VY
Manufacturer’s Identification - HBL4729VY
Connector
Housing
Contact and Ground Springs
Terminal Screws
Cable Inserts
Terminal Clamps
Body Holding Screws
15, 20 & 30A
Nylon
Brass
Steel multiple drive
Polyphenylene Oxide
CR Steel
Steel multiple drive
Description – Straight Body Connector
Type – 2 Pole, 3 Wire, Grounding
Rating – 15 and 20A 125V, 250V, & 277V AC, 30A 125 & 250V
Certification – UL Listed File E1706, CSA Certified
File LR280C
IP Suitability – IP20
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Specifications
Mechanical
Terminal Identification
Terminal Accommodation
Withstands 2,000V minimum.
125V, 250V or 277V AC as rated.
Certified for full rated current.
Max. 30°C temperature rise at full rated current after 50 cycles of
overload at 150% rated DC current.
Product Identification
Torque
Screw Color per UL 498 (Brass, White & Green).
15A-18 to 12AWG.
20A-18 to 10AWG.
30A-14 to 8AWG.
Molded rating on device face.
12 in-lb terminal screws, 7 in-lb assembly screws.
Cord Range
15A
20A
30A
.220” to .660” (5.6mm to 16.8mm).
.325” to .720” (8.26mm to 18.3mm).
.590” to .930” (15.0mm to 23.6mm).
Environmental
Flammability
Operating Temperature
UL 94HB.
Maximum continuous 75°C, minimum -40°C (w/o impact).
Standards
NEMA WD1
NEMA WD6
Listed to UL Standard UL498
Certified to CSA Standard C22.2 No. 42
B-88
www.hubbell-wiring.com
Dimensions in Inches (mm)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement