EA50 and EA60 Standard Series Medium Torque Non-Spring Return Rotary Actuators Features

Add to my manuals
1 Pages

advertisement

EA50 and EA60 Standard Series Medium Torque Non-Spring Return Rotary Actuators Features | Manualzz

6actuators 10/09/2003 2:47 PM Page 12

EA50 and EA60 Standard Series Medium

Torque Non-Spring Return Rotary Actuators

6-12

Features

• proportional actuators w/ built-in feedback potentiometer

• open/close contact closure input

• 24Vac, 120Vac and 240Vac

• 60, 220 and 450 in-lbs torque

• compatible with VB series valves

The EA50 and EA60 medium torque actuators are ideal for proportional positioning of a fuel valve, butterfly valve, damper and similar applications. Units are available with either fixed or adjustable speed. Timing of adjustable speed units can be increased (decreasing the speed) by turning a slotted adjustment screw on the outside of the case. Adjust range is approximately ten times rated.

Standard features include a 100Ω feedback slidewire and a single SPDT switch.

All models, except those with transformers, are UL/cUL listed. The EA50 and

EA60 are compatible with the VB-7000 and VB-9000 valves in this catalog.

Ordering codes

Model

Series

EA

Base

Model

Input Options

Motor Volt

Frequency

Input

00 Contact

11 4-20mAdc658A-00001

12 4-12mAdc658A-00002

13 12-20mAdc658A-00003

14 2-12mAdc658A-00004

15 2-7mAdc658A-00005

16 7-12mAdc658A-00006

19 Special658A-00008-x*

31 4-20mAdc659A-00000

Rain Tight Converters

21 4-20mAdc658A-00011

22 4-12mAdc658A-00012

23 12-20mAdc658A-00013

24 2-12mAdc658A-00014

25 2-7mAdc658A-00015

26 7-12mAdc658A-00016

29 Special658A-00018-x*

41 Slidewire659A-00010

Motor Volt/Frequency

0 120Vac, 60Hz

1 120Vac, 50Hz (n/a w/EA52 or EA54)

3 240Vac, 60Hz

4 240Vac, 50Hz (n/a w/EA53 or EA58)

5 24Vac, 60Hz (n/a with EA51, EA53, EA54)

Transformer

Feedback

Slidewire

Base Model

51 90˚travel limit,

12sec(adj), 60 in-lbs torque

52 180˚travel limit,

25 sec. (adj),

60 in-lbs torque

53 90˚ travel limit,

12 sec., 60 in-lbs torque

54 180˚travel limit,25 sec., 60 in-lbs torque

55 90˚travel limit,

40 sec. (adj),

220 in-lbs torque

56 180˚travel limit,

80 sec. (adj),

220 in-lbs torque

57 90˚travel limit,

40 sec.,

220 in-lbs torque

58 180˚travel limit,

80 sec.,

220 in-lbs torque

60 90˚travel limit,

65 sec., 450 in-lbs torque

61 180˚travel limit,

130 sec., 450 in-lbs torque

Logo/Label

Transformer

00 None

01 Built-in 120-24Vac**

02 Built-in 240-24Vac**

** Not UL/cUL listed

Fdbk Sldwre

0

1

2

3

100Ω

135Ω

500Ω

1000Ω

Logo/Label

0 Barber-Colman

E Eurotherm

Specials

00

Specials

None

Options

Not NEMA 4 Rated

00 None

01 Two auxiliary SPDT switches

02 Four auxiliary SPDT switches

03 Rear shaft

04 100Ω rear slidewire

05 100Ω rear slidewire with two switches

06 1000Ω rear slidewire

NEMA 4 Rated

31 One 100Ω rear slidewire and cover,

NEMA 4

32 Two 100Ω rear slidewires and cover, NEMA 4

33 Three 100Ω rear slidewires and cover, NEMA 4

37 NEMA 4 weather resistant cover

Specifications

Control action:

Floating. Requires SPDT switch with floating

(center off) position rated at 0.9 amps.

Proportional electric with slidewire feedback.

Connections:

Coded screw terminals

Shaft rotation:

Reversible proportional can stop at any point in the stroke. Adjustable 45-320º

Auxiliary switch:

Adjustable SPDT snap acting. Factory set toclose one contact and open other at end of clockwise rotation.

Ambient temperature:

-40 to 136°F (-40 to 58°C)

Humidity:

5 to 95% RH, non-condensing.

Case:

Die cast aluminum with two 1/2" conduit knockouts each side

Motor and gear train:

Oil immersed

Mounting:

Damper – upright recommended.

Valve – upright with actuator above centerline of valve body.

Dimensions:

7" H x 5-3/8" W x 6-5/16" D

Weight:

8 lbs.

Tel: 0411-82650498 82597851 86860590 Fax: 0411-82650478

e-mail: [email protected] [email protected] repair: [email protected]

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement