- No category
advertisement
DTS series
MIL-DTL-38999 Aluminium
Serie III
Summary / Sommaire
Introduction
Synoptic
Technical characteristics
Part numbering system
Key orientation
Arrangements
Receptacles
1
3
4
6-7-8
9
10
11
Présentation
Synoptique
Caractéristiques techniques
Système de référence
Détrompage mécanique
Arrangements
Embases
Hermetic receptacles
Plugs
12 Embases hermétiques
14 Fiches
Dummy receptacle and Panel seal 15 Embase de repos et Joint plat
Mating and unmating dimensions 17 Accouplements
Mounting styles
Contacts and tools
18-19
20-21
Modes de fixation
Contacts et outillages
18-19
20-21
15
17
12
14
6-7-8
9
10
11
1
3
5
Overal dimensions and characteristics are given for indication guideance only. DEUTSCH reserves the right to modify them for production improvement reasons (Proprietary products only).
Les côtes d’encombrements ainsi que les caractéristiques ne sont données qu’à titre indicatif. DEUTSCH se réserve le droit de les modifier dans le souci d’améliorer ses fabrications
(Produits propriétaires seulement).
Introduction / Présentation
1
4
2
3
5
6
7
1 Deutsch uses superior silicone seals providing maximum tear resistance and sealing memory.
2 Threaded coupling with self locking...
3 Provides 100 % metal-to-metal bottoming for maximum EMI grounding protection.
4 Trapezoidal thread assures better shell to shell continuity.
5 Grounding fingers providing EMI protection.
6 Elongated mounting holes permit the DTS connector to intermount with existing standard MIL-DTL-38999 box or wall mount receptacles, giving it a design replacement advantage.
7 Deutsch proven contact retention system provides superior contact retention under severe vibration.
1 L’Élastomère de silicone offre une résistance optimale au déchirement et une mémoire élastique.
2 Verrouillage à vis auto-freinée à sens prépondérant au verrouillage ou déverrouillage.
3 Butée métal-métal pour une protection
EMI maximal.
4 Filetage trapézoïdal assurant une meilleure continuité électrique entre boîtiers.
5 Continuité électrique entre fiche et embase, par couronne de masse (R.F.I.).
6 Collerette carrée avec 4 trous oblongs, permettant un montage en lieu et place des connecteurs existants, suivant
MIL-DTL-38999.
7 Clips moulés d’une seule pièce dans le bloc isolant réalisé en résine thermoplastique garantissant une rétention du contact optimale dans l’isolant.
1
DTS Advantages / Avantages
1 Threaded coupling with self locking.
2 100 % scoop-proof shells.
3 High resistance mechanical aluminium shells.
4 Stainless steel shells for hermetic version.
5 Corrosion : 500 hours salt spray protection for class W.
6 R.F.I. fingers.
7 Plugs and receptacles are equiped with thermoplastic and elastomer insert.
8 Thermoplastic clips molded directly with insert.
9 Hermetic receptacle shells with glass insert.
10 Removable crimping contacts
(SAE-AS 39029).
11 Sealing receptacle with contacts for printed circuit board.
12 Hermetic receptacle with solder contacts, contacts for printed circuit board.
13 Connector in accordance with specifications MIL-DTL-38999 series III.
14 Connector QPL (to order as per QPL).
1 Verrouillage rapide à vis 3 filets.
2 Boîtier 100 % scoop-proof.
3 Boîtier en alliage d’aluminium à haute résistance mécanique.
4 Boîtier en inox pour les hermétiques.
5 Protection 500 heures au brouillard salin en finition W pour la version étanche.
6 Fiches avec couronne de masse R.F.I.
7 Fiches et embases étanches avec isolant en résine et élastomère de synthèse.
8 Clips thermoplastiques de rétention des contacts, moulés dans l’isolant central.
9 Embases hermétiques à scellement verre métal.
10 Contacts à sertir démontables
(SAE-AS 39029).
11 Contacts à picots pour connecteur
étanche.
12 Contacts à souder et à picot pour embases hermétiques non démontables.
13 Les connecteurs DTS répondent aux normes MIL-DTL-38999 série III.
14 Connecteur QPL (commander suivant
QPL)
DTS Synoptic / Synoptique
Plug / Fiche Sealed Receptacles / Embases Etanches
20
4 holes square wall mounting
Collerette carrée fixation 4 trous
24 Jam-nut mounting
Collerette ronde fixation par écrou
Hermetic receptacles / Embases hermétiques
21
4 holes square wall mounting
Collerette carrée fixation
4 trous
26
23 Jam-nut mounting
Collerette ronde fixation par écrou
25
Solder mounting receptacle
Collerette à braser
27
Solder box mounting
Collerette à souder
Dummy receptacle / Prise de repos
PR
3
DTS Technical Characteristics
Mechanical
Shell
RFI ring
Insert
Material
Plating
Material
Flat gasket and 'o'ring
Contacts
Material
Material
Plating
Type
Retention
Material
Plating
Sealed version
Hermetic version
Sealed version
Hermetic version
Sealed version
Hermetic version
Sealed version
Hermetic version
Sealed version
Hermetic version
Vibrations
Physical shocks
Durability
Climatic
Service temperature
Thermal shocks
Sealing
Air leakage
Salt spray resistance
Sealed version
Hermetic version
Hermetic version
Sealed version
Aluminium alloy
Stainless steel
W - Olive drab cadmium F - Nickel
Y - Passived N - Nickel
Beryllium copper
Nickel/cadmium
Thermoplastic and fluorinated silicone elastomer
Sintered glass insert
Fluoronited silicone elastomer
Copper alloy
Ferrous alloy
Gold
Crimp type or pcb (consult us)
Solder type or pcb (consult us)
Size 22 D : 4,5 N Size 12 : 11,1 N
Size 20 : 6,7 N Size 8 : 11,1 N
Size 16 : 11,1 N
As per MIL-DTL-38999
300 g, 3 ms in the 3 axes
500 coupling and uncoupling cycles
Cadmium plating - 65° C to + 175° C
Nickel plating - 65° C to + 200° C
Passived plating - 65° C to + 200° C
As per MIL-DTL-38999
Leakage ≤ 16 cm3/h on mated connecting under 2.1 bars
≤ 1.10-6
-6 mbar. l/s under 1 bar vaccum
500 hours class W and Y, as per MIL-DTL-38999
48 hours class F and N, as per MIL-DTL-38999
4
Electrical
Withstanding voltage
Insulation resistance
Voltage drop
Shielding
Size
22
20
16
12
8
At sea level
At 70 000 ft altitude
Service M : 1300 V
Service I : 1800 V
Service II : 2300 V
Mated connector Unmated connector
Service M : 800 V
Service I : 1000 V
Service M : 200 V
Service I : 200 V
Service II : 1000 V Service II : 200 V
≥ 5000 MΩ to 25° C and 65 % HR max.
Size 22 : test to 5 Amp. = 73 millivolts max.
Size 20 : test to 7,5 Amp. = 55 millivolts max.
Size 16 : test to 13 Amp. = 49 millivolts max.
Size 12 : test to 23 Amp. = 42 millivolts max.
Size 8 : test to 46 Amp. = 26 millivolts max.
As per MIL-DTL-38999
Contacts current
Sealed version
5 A
7,5 A
13 A
23 A
46 A
Hermetic version
3 A
5 A
10 A
17 A
40 A
Diameter over insulation sheath in mm
0,76 to 1,37
1,01 to 2,10
1,65 to 2,77
2,46 to 3,61
4,50 to 5,80
For more information, see MIL-DTL-38999 series III or consult us.
Permitted wire
Section in mm 2
0,095 to 0,38
0,21 to 0,60
0,60 to 1,34
1,91 to 3,18
5,30 to 8,98
DTS Caractéristiques Techniques
Mécaniques
Boîtier Matière
Revêtement
Version étanche
Version hermétique
Version étanche
Version hermétique
Couronne de masse RFI Matière
Revêtement
Isolant Matière Version étanche
Version hermétique
Joint périphérique et torique
Contact
Matière
Matière Version étanche
Version hermétique
Revêtement
Type Version étanche
Version hermétique
Rétention mécanique des contacts dans l'isolant
Vibrations
Chocs
Endurance mécanique
Alliage d'aluminium
Acier inoxydable
W : Cadmié vert olive, F : Nickelé
Y : Passivé, N : Nickelé
Cuivre au béryllium
Nickelé / cadmié
Thermoplastique et élastomère de silicone fluoré
Verre fritté monobloc
Elastomère de silicone fluoré
Alliage de cuivre
Alliage ferreux
Or
A sertir ou à picot (nous consulter)
A souder ou à picot (nous consulter)
Taille 22 : 4,5 daN Taille 12 : 11,1 daN
Taille 20 : 6,7 daN Taille 8 : 11,1 daN
Taille 16 : 11,1 daN
Suivant MIL-DTL-38999
300 g, 3 ms dans les 3 axes
500 cycles accouplement / désaccouplement
Climatiques
Température d'utilisation
Chocs thermiques
Etanchéité
Herméticité
Tenue au brouillard salin
Version étanche
Version hermétique
Version hermétique
Version étanche
Revêtement cadmié - 65° C à + 175° C
Revêtement nickelé - 65° C à + 200° C
Revêtement passivé - 65° C à + 200° C
Suivant MIL-DTL-38999
Fuite ≤ 16 cm
3 /h sur connecteur accouplé sous 2.1 bars
≤ 1.10-6
-6 mbar l/s sous une dépression de 1 bar
500 heures classe W et Y, suivant MIL-DTL-38999,
48 heures classe F et N, suivant MIL-DTL-38999
Electriques
Tension de tenue
Résistance d'isolement
Chute de tension
Blindage
Au niveau de la mer
A 30 500 mètres d'altitude
Service M : 1300 V eff.
Service I : 1800 V eff.
Service II : 2300 V eff.
Connecteur accouplé Connecteur désaccouplé
Service M : 800 V eff.
Service M : 200 V eff.
Service I : 1000 V eff.
Service I : 200 V eff.
Service II : 1000 V eff.
Service II : 200 V eff.
≥ 5000 MΩ à 25° C et 60% HR max.
Taille 22 : test à 5 Amp. = 73 millivolts max.
Taille 20 : test à 7,5 Amp. = 55 millivolts max.
Taille 16 : test à 13 Amp. = 49 millivolts max.
Taille 12 : test à 23 Amp. = 42 millivolts max.
Taille 8 : test à 46 Amp. = 26 millivolts max.
Suivant MIL-DTL-38999
Taille
22
20
16
12
8
Intensité max. des contacts
Version Version
étanche hermétique
5 A
7,5 A
13 A
23 A
46 A
3 A
5 A
10 A
17 A
40 A
Ø sur gaine en mm
0,76 à 1,37
1,01 à 2,10
1,65 à 2,77
2,46 à 3,61
4,50 à 5,80
Câble utilisable section en mm 2
0,095 à 0,38
0,21 à 0,60
0,60 à 1,34
1,91 à 3,18
5,30 à 8,98
Pour plus d’informations techniques, se reporter à la norme MIL-DTL-38999 série III ou nous consulter.
5
DTS Part Numbering System / Système de référence
Deutsch system - Sealed version / Système Deutsch - Version étanche
Example of order / Exemple de commande : DTS 20 F 09-35 PN
Shell type
Square flange receptacle - 20
Jam-nut mounting receptacle - 24
Plug - 26
Type de boîtier
Embase collerette carrée - 20
Embase collerette ronde - 24
Fiche - 26
Shell size
Taille du boîtier
09-11-13-15-17-19-21-23-25
Contact type
P - Male contact
S - Female contact
A - Without male contact
B - Without female contact
U - Male pcb contact
M - Female pcb contact
Type de contact
P - Contact mâle
S - Contact femelle
A - Sans contact mâle
B - Sans contact femelle
U - Contact mâle à picot
M - Contact femelle à picot
Special Modifications
Consult us
Modifications spéciales
Nous consulter
DTS 20 F 09 35 P N *
Connector type
Type de connecteur
Finish
Olive drab cadmium - W
Nickel - F
Finition
Cadmié vert olive - W
Nickelé - F
Attention - The square flange receptacle is never delivered with panel seal. For ordering panel seals see page 15. For standard contacts delivered with the connector, see page 20.
Les embases à collerette carrée, sont toujours livrées sans joint plat. Pour les commander, voir page 15. Pour les contacts standards livrés avec le connecteur, voir page 20.
Arrangements
(See page / voir page 10)
Key orientation
Détrompage mécanique
N - A - B - C - D - E
(See page / voir page 9)
6
MIL-DTL-38999 System - Sealed version / Système suivant MIL-DTL-38999 - Version
étanche
Example of order / Exemple de commande : D38999/20FA35PN
Shell type
Square flange receptacle - 20
Jam-nut mounting receptacle - 24
Plug - 26
Type de boîtier
Embase collerette carrée - 20
Embase collerette ronde - 24
Fiche - 26
Contact type
P - Male contact
S - Female contact
A - Without male contact
B - Without female contact
Type de contact
P - Contact mâle
S - Contact femelle
A - Sans contact mâle
B - Sans contact femelle
Shell size
A - B - C - D - E - F - G - H - J
(For 9 - 11 - 13 - 15 - 17 - 19 - 21 - 23 - 25)
D38999 / 20 F A 35 P N
Model of designation
Désignation du model
Finish
Olive drab cadmium - W
Nickel - F
Finition
Cadmié vert olive - W
Nickelé - F
Arrangements
(See page / voir page 10)
Key orientation
Détrompage mécanique
N - A - B - C - D - E
(See page / voir page 9)
DTS Part Numbering System / Système de référence
Deutsch system - Hermetic version / Système Deutsch - Version Hermétique
Shell type
Square flange receptacle - 21
Jam-nut mounting receptacle - 23
Hard solder receptacle - 25
Solder receptacle - 27
Type de boîtier
Embase collerette carrée - 21
Embase collerette ronde - 23
Embase collerette à braser - 25
Embase collerette à souder - 27
Shell size
Taille du boîtier
09-11-13-15-17-19-21-23-25
Contact type
P - Male contact
Type de contact
P - Contact mâle
DTS 21 F
Connector type
Type de connecteur
Finish
Nickel - N
Passived - Y
Finition
Nickelé - N
Passivé - Y
Attention - The square flange receptacle is never delivered with panel seal. For ordering panel seals see page 15.
Les embases à collerette carrée, sont toujours livrées sans joint plat. Pour les commander, voir page 15.
15 19 P N
Arrangements
(See page / voir page 10)
Key orientation
Détrompage mécanique
N - A - B - C - D - E
(See page / voir page 9)
MIL-DTL-38999 System - Hermetic version / Système suivant MIL-DTL-38999 - Version
Hermétique
Shell type
Square flange receptacle - 21
Jam-nut mounting receptacle - 23
Hard solder receptacle - 25
Solder receptacle - 27
Type de boîtier
Embase collerette carrée - 21
Embase collerette ronde - 23
Embase collerette à braser - 25
Embase collerette à souder - 27
Shell size
A - B - C - D - E - F - G - H - J
(For 9 - 11 - 13 - 15 - 17 - 19 - 21 - 23 - 25)
Contact type
P - Male contact
Type de contact
P - Contact mâle
D38999 / 21
Model of designation
Désignation du model
N
Finish
Nickel - N
Passived - Y
Finition
Nickelé - N
Passivé - Y
J 19
Arrangements
(See page / voir page 10)
P N
Key orientation
Détrompage mécanique
N - A - B - C - D - E
(See page / voir page 9)
7
DTS Part Numbering System / Système de référence
Deutsch system - Protective cover / Système Deutsch - Bouchon de protection
Example of order / Exemple de commande : DTS-W-N 20-15
Finish
Nickel : F
Olive drab cadmium : W
Finition
Nickelé : F
Cadmié vert olive : W
Shell type
20 : Protective cover for receptacle
26 : Protective cover for plug
Type de boîtier
20 : Bouchon de protection pour embase
26 : Bouchon de protection pour fiche
Shell size
Taille du boîtier
09-11-13-15-17-19-21-23-25
15 DTS W N
Connector type
Type de connecteur
20
Fastening type
N : Rope and ring
R : Rope only
Type d’attache
N : Cordelette avec bague
R : Cordelette seule
-
8
Deutsch system - Dummy receptacle / Système Deutsch - Prise de repos
Example of order / Exemple de commande : DTS-PR 21 W
Dummy receptacle
Prise de repos
Finish
F - Nickel
W - Olive drab cadmium
Finition
F - Nickelé
W - Cadmié vert olive
DTS PR
Connector type
Type de connecteur
21 W
Shell size
Taille du boîtier
09-11-13-15-17-19-21-23-25
DTS Key Orientation / Détrompage Mécanique
Key orientation
Position angulaire des clés de détrompage
C
D
A
Size
Taille
09
11 to/à 15
17 to/à 25
Orientation
Position angulaire
D
E
N
A
B
C
D
E
B
C
E
N
C
D
A
N
A
B
A°
90
53
119
51
80
135
49
66
62
79
105
102
80
35
64
91
95
113
Polarization in degrees
Polarisation en degrés
B° C°
145
156
146
141
142
170
169
140
145
153
140
132
118
140
155
131
141
156
195
220
176
184
196
200
200
200
180
197
215
248
230
205
234
197
208
182
D°
252
255
298
242
293
310
244
257
280
272
265
320
312
275
304
240
236
292
9
DTS Arrangements
Male insert viewed from front face / Vue face avant isolant mâle.
Disposition 09-35
6 contacts size/taille 22
Disposition 09-98
3 contacts size/taille 20
Disposition 11-01
*
1 contacts size/taille 8
Disposition 11-05
5 contacts size/taille 20
Disposition 11-12
*
1 contacts size/taille 12
Disposition 11-35
13 contacts size/taille 22
Disposition 11-98
6 contacts size/taille 20
Disposition 11-99
7 contacts size/taille 20
Disposition 13-04
4 contacts size/taille 16
Disposition 13-08
8 contacts size/taille 20
Disposition 13-35
22 contacts size/taille 22
Disposition 13-98
10 contacts size/taille 20
Disposition 15-05
5 contacts size/taille 16
Disposition 15-15
*
14 contacts size/taille 20
1 contact size/taille 16
Disposition 15-18
18 contacts size/taille 20
Disposition 15-19
19 contacts size/taille 20
Disposition 15-35
37 contacts size/taille 22
Disposition 15-97
*
8 contacts size/taille 20
4 contacts size/taille 16
Disposition 17-06
6 contacts size/taille 12
Disposition 17-08
*
8 contacts size/taille 16
Disposition 17-26
26 contacts size/taille 20
Disposition 17-35
55 contacts size/taille 22
Disposition 17-75
*
2 contacts size/taille 8
Disposition 17-99
*
21 contacts size/taille 20
2 contacts size/taille 16
Disposition 19-11
*
11 contacts size/taille 16
Disposition 19-32
32 contacts size/taille 20
Disposition 19-35
66 contacts size/taille 22
Disposition 21-11
*
11 contacts size/taille 12
Disposition 21-16
16 contacts size/taille 16
Disposition 21-35
79 contacts size/taille 22
Disposition 21-39
2 contacts size/taille 16
37 contacts size/taille 20
Disposition 21-41
41 contacts size/taille 20
Disposition 21-75
*
4 contacts size/taille 8
Disposition 23-21
*
21 contacts size/taille 16
Disposition 23-35
*
100 contacts size/taille 22
Disposition 23-53
53 contacts size/taille 20
Disposition 23-55
*
55 contacts size/taille 20
Disposition 25-04 v l
Z
*
48 contacts size/taille 20
8 contacts size/taillee 16
Disposition 25-19
*
19 contacts size/taille 12
Disposition 25-24
*
12 contacts size/taille 16
12 contacts size/taille 12
Disposition 25-29
*
29 contacts size/taille 16
Disposition 25-35
128 contacts size/taille 22
Disposition 25-36
24 contacts size/taille 20
10 contacts size/taille 16
1 contact size/taille 12 blindé
1 contact size/taille 12 coax
3 contacts size/taille 8
Disposition 25-41
22 contacts size/taille 22
3 contacts size/taille 20
11 contacts size/taille 16
2 contacts size/taille 12
3 contacts size/taille 8
Disposition 25-20
*
10 contacts size/taille 20
13 contacts size/taille 16
4 contacts size/taille 12
3 contacts size/taille 8 r s q
P n m k h
A t
AA u v z y g w x e
Disposition 25-46
*
40 contacts size/taille 20
4 contacts size/taille 16
2 contacts size/taille 8
*
Hermetic, consult us. Hermétiques, nous consulter.
10
Disposition 25-61
*
61 contacts size/taille 20
DTS Receptacles / Embases
Square flange / Collerette carrée Type 20
13,50 ± 0,6
With PCB contacts
Avec contacts à picots
Contact size
Taille contact
22
20
16
12
R
± 0,05
1,0 .
1,5
S
+ 0
-- 0,05
0,50
0,70
.
.
2,2 1,15
3,80 ± 0,04 1,50 ± 0,1
PCB contacts part number
Référence contacts à picot
See/page 21
12,95 max.
With protect sleeves, see pages 18 and 19
Manchon avec “tétine”, voir pages 18 et 19
Size
Taille
21
23
25
09
11
13
15
17
19
B
± 0,3
C1 C2 D max.
E
+ 0
-- 0,4
F
± 0,1
23,80 18,26 15,09 20,90 2,10 / 2,50 15,75
26,20 20,62 18,26 20,90 2,10 / 2,50 18,90
28,60 23,01 20,62 20,90 2,10 / 2,50 22,10
31,00 24,61 23,01 20,90 2,10 / 2,50 25,25
33,30 26,97 24,61 20,90 2,10 / 2,50 29,95
36,50 29,36 26,97 20,90 2,10 / 2,50 31,55
G
± 0,1
P
± 0,2
11,90 3,25
14,90 3,25
17,90 3,25
21,90 3,25
24,90 3,25
27,90 3,25
39,70 31,75 29,36 20,10 2,10 / 3,20 34,70
42,90 34,93 31,75 20,10 2,10 / 3,20 37,90
30,90
33,90
3,25
3,91
46,00 38,10 34,93 20,10 2,10 / 3,20 41,10 36,90
*
Mass without contact. Poids sans contact
3,91
PP
± 0,2
5,49
4,93
4,93
4,93
4,93
4,93
4,93
6,15
6,15
Mass/Masse
Alu *
10,00
16,00
22,00
31,00
46,00
51,00
65,00
78,00
97,00
Jam-nut mounting / Collerette ronde Type 24
12,06
5
With PCB contacts
Avec contacts à picots
Contact size
Taille contact
22
20
16
12
R
± 0,05
S
+ 0
-- 0,05
0,50 .
1,0 .
1,5
2,2
0,70 .
1,15
3,80 ± 0,04 1,50 ± 0,1
PCB contacts part number
Référence contacts à picot
See/page 21
12,95 max.
With protect sleeves, see pages 18 and 19
Manchon avec “tétine”, voir pages 18 et 19
Size
Taille
17
19
21
23
25
09
11
13
15
A
± 0,3
B
± 0,4
30,20 27,00
34,90 31,80
38,10 34,90
41,30 38,10
44,50 41,30
49,20 46,00
52,40 49,20
55,60 52,40
58,70 55,60
E
+ 0,1
- 0,7
2,20
2,20
2,20
2,20
2,20
3,00
3,00
3,00
3,00
F
± 0,1
G
± 0,1
M Mass/Masse mini / max.
Alu *
15,75 11,90 21,82 / 24,00
18,90 14,90 24,99 / 27,00
22,10 17,90 29,77 / 32,00
25,25 21,90 32,91 / 36,00
29,95 24,90 36,12 / 37,00
31,55 27,90 39,25 / 41,00
34,70 30,90 42,47 / 46,00
37,90 33,90 45,61 / 50,00
41,10 36,90 49,25 / 51,23
16,00
23,00
31,00
48,00
55,00
67,00
81,00
93,00
111,00
*
Mass without contact
Poids sans contact
11
DTS Hermetic receptacles / Embases hermétiques
Square flange / Collerette carrée Type 21
21,40 max.
2,60 max.
B
C1
C2
B F
5,70 max.
12,95 max.
PP
P
Size
Taille
17
19
21
23
25
09
11
13
15
B
± 0,3
C1 C2 F
± 0,1
23,80 18,26 15,09 15,75
26,20 20,62 18,26 18,90
28,60 23,01 20,62 22,10
31,00 24,61 23,01 25,25
33,30 26,97 24,61 29,95
36,50 29,36 26,97 31,55
39,70 31,75 29,36 34,70
42,90 34,93 31,75 37,90
46,00 38,10 34,93 41,10
P
± 0,2
3,25
3,25
3,25
3,25
3,25
3,25
3,25
3,91
3,91
PP
± 0,2
5,49
4,93
4,93
4,39
4,93
4,93
4,93
6,15
6,15
Mass/Masse
Stainless steel/Acier inox.
25,00
35,00
45,00
59,00
83,00
89,00
110,00
127,00
148,00
Jam-nut mounting / Collerette ronde Type 23
L
22,60 max.
B
M
12,95 max.
Ø A
Size
Taille
17
19
21
23
25
09
11
13
15
A
± 0,3
B
± 0,4
30,20 27,00
34,90 31,80
38,10 34,90
41,30 38,10
44,50 41,30
49,20 46,00
52,40 49,20
55,60 52,40
58,70 55,60
E
+ 0,3
-- 0,1
2,60
2,60
2,60
2,60
2,60
3,40
3,40
3,40
3,40
F G L M
± 0,1
+ 0,3
-- 0 max.
15,75 16,30 29,20 21,82
18,90 19,40 29,20 24,99
22,10 22,70 29,30 29,77
25,25 25,90 29,30 32,91
29,95 29,00 29,30 36,12
31,55 32,20 30,10 39,25
34,70 35,40 30,10 42,47
37,90 38,60 30,10 45,61
41,10 41,70 30,10 49,25
Mass/Masse
Stainless steel/Acier inox.
38,00
49,00
67,00
76,00
108,00
128,00
148,00
154,00
190,00
12
Hard solder receptacle / Collerette à braser - Type 25
MOUNTING STYLES / MODE DE FIXATION
19,40 max.
L
0,9
± 0,3
Ø H
V
Panel cutout / Perçage panneau
F
12,95 max.
G Ø A
9,70 styles P and X max.
10,30 styles S and Z max.
Soldered box mounting / Collerette à souder - Type 27
MOUNTING STYLES / MODE DE FIXATION
20,90 max.
Ø H1 F Ø A1
V1
Panel cutout / Perçage panneau
12,95 max.
9,70 styles P and X max.
10,30 styles S and Z max.
Size
Taille
17
19
21
23
25
09
11
13
15
A max.
19,40
21,80
25,10
28,10
31,30
33,60
36,80
40,00
43,20
A1
+ 0,3
-- 0
24,70
27,80
31,00
34,20
36,40
40,10
43,70
47,90
50,10
E
± 0,2
3,20
3,20
3,20
3,20
3,20
3,20
3,20
4,00
4,00
F
± 0,21
G max.
H
+ 0
-- 0,25
15,75 17,10 17,58
18,90 19,90 20,35
22,10 23,10 23,52
25,25 26,20 26,70
29,95 29,40 29,87
31,55 31,80 32,26
34,70 35,00 35,43
37,90 38,20 38,60
41,10 41,30 41,80
H1 L mini.
max.
V mini.
25,06 23,80 22,60
28,16 23,80 25,80
31,36 23,80 30,20
34,56 23,80 33,30
36,76 23,80 36,50
40,46 23,80 39,30
44,06 23,80 42,50
48,26 24,60 45,70
50,46 24,60 48,80
V1
+ 0
-- 0,25
Ø T
+ 0
-- 0,3
27,00 23,90
29,50 27,00
32,50 30,20
35,60 33,40
37,80 35,60
41,50 39,30
45,10 42,90
49,30 47,10
51,50 49,30
Mass/Masse
Stainless steel/Acier inox.
25,00
35,00
45,00
59,00
83,00
89,00
110,00
127,00
148,00
13
DTS Plugs / Fiches
TYPE 26
31 max.
F
17,30 max.
G Ø S
Ø 8,75 max.
Size
Taille
17
19
21
23
25
09
11
13
15
F
+ 0,2
- 0 .
18,40
21,10
25,40
28,70
32,20
34,90
38,10
41,10
44,30
G
± 0,1
11,90
14,90
17,90
21,90
24,90
27,90
30,90
33,90
36,90
S max.
21,80
25,00
29,40
32,50
35,70
38,50
41,70
44,90
48,00
Mass/Masse max. *
15,00
20,00
31,00
42,00
55,00
63,00
79,00
88,00
109,00
*
Mass without contact
Poids sans contact
14
DTS Dummy receptacle / Embase de repos
Type PR
D E
B
C1
C2
F
12,95 max.
PP
P
Size
Taille
17
19
21
23
25
09
11
13
15
B
± 0,3
23,80
26,20
28,60
31,00
33,30
36,50
39,70
42,90
46,00
C1 C2 D max.
18,26 15,09 20,90
20,62 18,26 20,90
23,01 2062 20,90
24,61 23,01 20,90
26,97 24,61 20,90
29,36 26,97 20,90
31,75 29,36 20,10
34,93 31,75 20,10
38,10 34,93 20,10
E max.
2,50
2,50
2,50
2,50
2,50
2,50
3,20
3,20
3,20
F
± 0,1
15,73
18,91
22,08
25,26
29,96
31,54
34,72
37,90
41,07
P
± 0,2
3,25
3,25
3,25
3,25
3,25
3,25
3,25
3,91
3,91
PP
5,49
4,93
4,93
4,93
4,93
4,93
4,93
6,15
6,15
Mass/Masse max.
10,00
16,00
22,00
31,00
46,00
51,00
65,00
78,00
97,00
Panel seal / Joint plat
For square flange receptacle / Pour embase collerette carrée
Sealed version
Version étanche
E
B
C
B
Ø H C B
4 holes/trous Ø T
E1 max.
Size
Taille
09
19
21
23
25
11
13
15
17
Front flange mounting
Joint avant collerette
Part number
Réference
108-0003-10
108-0001-12
108-0001-14
108-0001-16
108-0003-18
108-0003-20
108-0003-22
108-0003-24
108-0001-25
H max.
B max.
C
± 0,1
15,40 24,30 18,30
18,40 26,70 20,60
22,70 29,10 23,00
25,90 31,30 24,60
29,10 33,70 27,00
32,30 36,90 29,40
35,40 40,10 31,75
38,60 43,30 34,90
41,10 46,00 38,10
E max.
3,00
3,00
3,00
3,00
3,00
3,00
3,00
3,00
3,00
E1 max.
5,92
5,92
5,92
5,92
5,92
5,92
5,16
5,16
4,87
T max.
3,30
3,30
3,30
3,30
3,30
3,30
3,30
4,30
3,90
Rear flange mounting
H max.
Joint arrière collerette
Part number
Réference
Size
Taille
14,10
17,20
20,40
23,60
26,80
30,60
33,50
36,30
37,70
108-0004-10
108-0004-12
108-0004-14
108-0004-16
108-0004-18
108-0001-20
108-0001-22
108-0004-24
108-0012-25
09
19
21
23
25
11
13
15
17
Nota : The panel seal is never delivered with receptacle. To be ordered separatly.
Les joints plats ne sont jamais livrés avec les embases, les commander séparément.
15
DTS-K / DTS-S Protectives Cover / Bouchons de protection
For receptacle / Pour embase - Type 20
TYPE N
23 max.
Ø C
TYPE R
Ø S
130
±10
Ø D mini
Ø 4,24
+ 0,25
- 0,13
Size
Taille
17
19
21
23
25
09
11
13
15
C max.
D S mini.
max.
24,00 13,00 23,00
27,00 18,00 26,00
30,00 20,00 31,00
31,00 23,00 33,00
37,00 26,00 37,00
40,00 29,00 40,00
44,00 32,00 44,00
46,00 34,00 46,00
49,00 39,00 50,00
For plug / Pour fiche - Type 26
TYPE N
30 max.
21 ± 0,30
Ø C
Ø S
Ø D mini.
130 ± 10
TYPE R
Ø 4,24
+ 0,25
- 0,13
Size
Taille
21
23
25
09
11
13
15
17
19
C max.
D S mini.
max.
24,00 13,00 23,00
27,00 18,00 26,00
30,00 20,00 31,00
31,00 23,00 33,00
37,00 26,00 37,00
40,00 29,00 40,00
44,00 32,00 44,00
46,00 34,00 46,00
49,00 39,00 50,00
16
DTS Mating and Unmating Dimensions / Accouplements
Square flange / Collerette carrée - Types 20 - 26
Front mounting / Montage avant
38,80 max.
Type 20 Type 26
8,75 max.
53,05 max.
Rear mounting / Montage arrière
35,60 max.
3,20 max.
Type 20
17
19
21
23
25
09
11
13
15
Size
Taille
Coupling torque / Couple de serrage
Mating and unmating
Verrouillage et déverrouillage
Unmating
Déverrouillage
Nm max.
2,7
3,2
3,6
4,1
4,6
0,9
1,4
1,8
2,3
Nm mini.
0,3
0,3
0,6
0,6
0,6
0,2
0,2
0,2
0,3
Type 26
11,90 max.
49,85 max.
Jam nut mounting / Collerette ronde - Types 24 - 26
2,30 to 3,10 max.
1,58 to 3,20 max.
Type 24
37,05 max.
Type 26
21
23
25
09
11
13
15
17
19
Size
Taille
Coupling torque / Couple de serrage
Mating and unmating Unmating
Verrouillage et déverrouillage
Nm max.
0,9
1,4
1,8
2,3
2,7
3,2
3,6
4,1
4,6
Déverrouillage
Nm mini.
0,2
0,2
0,2
0,3
0,3
0,3
0,6
0,6
0,6
10,75 max.
51,30 max.
17
DTS Mounting styles / Modes de fixation
For sealed receptacles / Pour embases étanches - TYPE 20 - 24
Type 24 Type 20
Front panel mounting
Montage avant panneau
3,20 max.
1,58 to 3,20 max.
For hermetic receptacles / Pour embases hermétiques - TYPE 21 - 23
Type 23 Type 21
Front panel mounting
Montage avant panneau
3,20 max.
1,58 to 3,20 max.
18
C1
Panel cutout / Perçage panneau
Ø H C1 Ø H1
V V1
Size
Taille
17
19
21
23
25
09
11
13
15
H mini
C1 Front Rear
Avant Arrière
18,26 13,11 16,66
20,62 15,08 22,22
23,01 19,05 23,42
24,61 23,01 26,59
26,97 25,81 30,96
29,36 28,98 32,94
31,75 32,16 36,12
34,93 34,93 39,29
38,10 37,69 42,47
Coupling torque
H1 K V V1 Couple de serrage
+ 0,25
-- 0
+ 0,25
-- 0 mini.
mini.
17,70 16,99 24,60 27,80
Nm mini. Nm max.
3,40 4,00
20,88 19,53 27,00 32,60
25,58 24,26 30,20 36,00
28,80 27,53 33,30 39,60
31,98 30,68 36,50 43,30
35,15 33,86 39,30 47,00
38,28 37,06 42,50 50,60
41,50 40,01 45,70 54,20
44,68 43,41 48,80 59,70
4,50
6,20
7,90
9,00
10,20
11,30
12,40
13,60
5,20
6,80
8,50
9,60
10,70
12,40
13,50
14,70
K
19
DTS Contacts
Color code
1 2 3
Color code
3 2 1
Contact male / Mâle contact Contact female / Female contact Wires strip length / Longueur de dénudage
CONTACTS CABLES
Commercial pn
Référence
Commerciale
724-0001-22
724-0007-22
724-0001-20
724-0007-20
724-0001-16
724-0007-16
724-0001-12
724-0007-12
182-0001-08
182-0003-08
182-0068-20
182-0009-20
182-0069-20
182-0010-20
182-0068-22
182-0009-22
182-0069-22
182-0010-22
Type Size
Genre Taille
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
22
20
16
12
8
20
20
22
22
1
Color code
Code couleur
2 3
Observations
Observations
Section 2 in / en mm 2
AWG wire
Taille
Ø over sheath
Ø sur gaine
L
Orange/orange Blue/Bleu
Orange/Orange Yellow/Jaune
Orange/orange
Orange/orange
Orange/orange
Orange/orange
Orange/orange
Orange/orange
-
Yellow/Jaune
Yellow/Jaune
Yellow/Jaune
Yellow/Jaune
Yellow/Jaune
Yellow/Jaune
Yellow/Jaune
Yellow/Jaune
Blue/Bleu
Green/Vert
Blue/Bleu
Green/Vert
Blue/Bleu
Green/Vert
-
Purple/Violet
Grey/Gris
Purple/Violet
Grey/Gris
Black/Black
Grey/Gris
Orange/orange
Brown/Marron
Yellow/Jaune
Red/Rouge
Green/Vert
Orange/orange
-
Purple/Violet Brown/Marron
White/Blanc
Purple/Violet
White/Blanc
Green/Vert
Purple/Violet
Blue/Bleu
Grey/Gris
Green/Vert
Red/Rouge
Blue/Bleu
Standard contact
Standard contact
0,10 to / à 0,38 22 to / à 28 0,76 to / à 1,37 5,00 to / à 5,80
0,21 to / à 060 20 to / à 24 1,02 to / à 2,11 5,80 to / à 6,60
Standard contact
Standard contact
0,60 to / à 1,34 16 to / à 20 1,65 to / à 2,77 5,80 to / à 6,60
1,93 to / à 3,18 12 to / à 14 2,46 to / à 3,61 5,80 to / à 6,60
Power contact
Contact de puissance
5,30 to / à 8,98 8 4,50 to / à 5,80 9,20 to / à 9,80
Alumel contact
Chromel contact
Alumel contact
Chromel contact
0,21 to / à 0,60 20 to / à 24 1,02 to / à 2,11 5,80 to / à 6,60
0,21 to / à 0,60 20 to / à 24 1,02 to / à 2,11 5,80 to / à 6,60
0,10 to / à 0,38 22 to / à 28 0,76 to / à 1,37 5,00 to / à 5,80
0,10 to / à 0,38 22 to / à 28 0,76 to / à 1,37 5,00 to / à 5,80
Standards contacts delivered with connector. Contacts standards livrés avec le connecteur.
NRG band thermocouple contacts, consult us / Contacts thermocouple avec NRJ band, nous consulter.
Databus contacts size 8 (twisted pair) as per MIL-DTL-38999 series I, III and IV standard
Contact Databue taille 8 (paire blindée) conforme à la norme MIL-DTL-38999 séries I, III et IV
CONTACTS CABLES SLEEVE / MANCHONS TOOLS / OUTILLAGE
PN commercial
Référence
Commerciale
Type Size Color code
Genre Taille Code couleur
182-0034-03
182-0035-03
182-0034-04
182-0035-04
182-0347-01
182-0346-01
182-0347-02
182-0346-02
P
S
P
S
P
S
P
S
8
8
8
8
Brown-red
Marron-rouge
Red-red
Rouge-rouge
Brown-red
Marron-rouge
Red-red
Rouge-rouge
Types
Types
Braid simple
Simple tresse
High immunity double braid
Double tresse haute immunité
Braid simple
Simple tresse
High immunity double braid
Double tresse haute immunité
Conducteur Braid max. section Ø max.
Section max. Ø max.
conducteur tresse
0,86 mm2
0,86 mm2
0,86 mm2
0,86 mm2
3,48
3,91
3,48
3,91
Type
Type
Thermosetting and silicone
Silicone et thermodurcissable
Thermosetting and silicone
Silicone et thermodurcissable
Thermosetting and silicone
Silicone et thermodurcissable
Thermosetting and silicone
Silicone et thermodurcissable
Crimping tool
Pince à sertir
Conductor Ferrule
Conducteur Ferrule
TDB-CT-08
TDB-CT-08
TDB-CT-08
TDB-CT-08
Extraction
Extraction
TDB-CT-HEX
Mark C
114-008 or/ou
Empreinte C M 81969/14-06
TDB-CT-HEX 114-008
Mark D or/ou
Empreinte D M 81969/14-06
TDB-CT-HEX
Mark D
114-008 or/ou
Empreinte D M 81969/14-06
TDB-CT-HEX 114-008
Mark D or/ou
Empreinte D M 81969/14-06
Note : Size 8 and Bus contacts are delivered with protect sleeve. / Les contacts taille 8 et Bus, sont livrés avec le manchon de protection arrière “Tétine”
DTS Tools / Outillages
L AND
TAL ER
CH
PO
Connector rear face
Face arrière du connecteur
SEALING PLUG / OBTURATEURS
Part number
Référence
028-0102-22
Color code code couleur
Yelow/Jaune
006-0893-20 Red/Rouge
TOOLS / OUTILLAGE
Tools / Outils
Insertion Extraction d’insertion D’extraction
M 81969/14-01
M 15570-20
Crimping tool
Pilot stop for crimping tool
Pince à sertir Butée pour pince à sertir
M 22520/2-01
M22520/2-09
M 2250/2-07
M 22520/1-01 M 22520/1-04
006-0893-16
006-0893-12
182-0064-08
Blue/Bleu
Yelow/Jaune
-
M 15570-16 M 22520/1-01
M 15570-12
Manual/Manuel M 81969/14-6
M 22520/1-01
M 300 BT
M 22520/01-04
M 22520/1-04
SP 593
STANDARDIZATION / NORMES
CONTACTS
SAE-AS 39029/58-360
SAE-AS 39029/56-348
SAE-AS 39029/58-363
SAE-AS 39029/56-351
SAE-AS 39029/58-364
SAE-AS 39029/56-352
SAE-AS 39029/58/365
SAE-AS 39029/56-353
006-0893-20
006-0893-20
028-0102-22
028-0102-22
Red/Rouge
Red/Rouge
Yelow/Jaune
Yelow/Jaune
M 15570-20
M 15570-20
M 81969/14-01
M 81969/14-01
M 22520/1-01
M 22520/1-01
M 22520/2-01
M 22520/2-01
M 22520/1-04
M 22520/1-04
M 22520/2-09
M 22520/2-07
M 22520/2-09
M 22520/2-07
SAE-AS 39029/87-475
SAE-AS 39029/88-487
SAE-AS 39029/87-476
SAE-AS 39029/88-488
SAE-AS 39029/87-471
SAE-AS 39029/89-495
SAE-AS 39029/87-472
SAE-AS 39029/89-496
PCB contacts / Contacts à picot
Genre Size Part number
Type Taille Référence
P
S
22
20
16
12
22
20
16
12
724-0902-22
724-0902-20
724-0902-16
724-0902-12
724-0904-22
724-0904-20
724-0904-16
724-0904-12
Size
Taille
Coaxial contacts / Contacts coaxiaux
Genre Part number
Type
SAE-AS 39029/
Référence
16
12
8
P
S
P
S
P
S
76
77
102
103
59
60
724-0004-16
182-0013-16
182-0100-12
182-0101-12
182-0127-68
182-0128-68
Size
Taille
12
Shielded contacts / Contacts blindés
Genre Part number
Type
SAE-AS 39029/
Référence
P
S
28
52
182-0098-12
182-0099-12
Intermediate contact
Contact intermédiaire
Crimping tool
Pince à sertir
Mark B
Empreinte B
TDB-CT-08
TDB-CT-08
M 22520/2-01
M 22520/2-01
057-0782-00
057-0782-00
057-0782-00
057-0782-00
TOOLS / OUTILLAGE
Crimping tool
Pince à sertir
Ferrule
Tool
Outillage
Mark A Extraction
Empreinte A D’extraction
Dynanometrique key
Clef dynamométrique
Arrangements for contact size 8
Arrangements pour contacts taille 8
Version Arrangements
M 22520/5-01 057-0782-00
114-008 or/ou
M 81969-14-06
DF 57 095-02 A
21-30
21-46
M 22520/5-01
M 22520/5-01
M 22520/5-01
057-0782-00
114-008 or/ou
M 81969-14-06
057-0782-00
114-008 or/ou
M 81969-14-06
057-0782-00
114-008 or/ou
M 81969/14-6
DF 57 095-02
DF 57 095-02
DF 57-095-20
A
B
B
21-30
21-46
11-01 - 11-75
17-28 - 21-75
11-01 - 11-75
17-28 - 21-75
Note : Cabling notice. Notice de câblage Version A : PN. NC 187.013
Cabling notice. Notice de câblage Version B : Ref. NC 182.021.
21
www.deutsch.net
DEUTSCH GLOBAL SALES 0NETWORK
Contact your local sales office for further information:
AUSTRALIA
EP&DE
401a Lal Lal Street
Ballarat, VIC 3350
AUSTRALIA
Tel: +61 3 5331 4700
ITALY
Deutsch Italia
9 Piazzale Lugano
20158 Milano
ITALY
Tel: +39 0239 322 240
FRANCE
Connecteurs Electriques
Deutsch
17, rue Lavoisier BP 117
27091 Evreux Cedex 09
FRANCE
Tel: +33 2 32 23 57 00
JAPAN
Deutsch Japan Ltd.
44-10 Ohyamakanai-cho
Itabashi-ku
Tokyo 173-0024
JAPAN
Tel: +81 3 5995 5192
GERMANY
Compagnie Deutsch GMBH
Fraunhoferstrabe.11b
82152 Martinsried
GERMANY
Tel: +49 89 89 91 570
ISRAEL
Deutsch ECM
P.O. Box 5010
Ashkelon 78150
Southern Industrial Zone
ISRAEL
Tel: +972 8 671 0903
UNITED KINGDOM
Deutsch UK
Stanier Road
St Leonards on Sea
East Sussex TN38 9RF
UK
Tel: +44 (0) 1424 852722
USA
Deutsch DAO
250 Eddie Jones Way
Oceanside, CA 92054
USA
Tel: +1 (760) 757-7500
Literature Code CC 750-41 H Edition June 2009
For more information, technical assistance or custom solutions: email [email protected]
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project