Operating instructions | Sony 4418506211 DVD Player User Manual

Sony 4418506211 DVD Player User Manual
4-418-506-12(1)
Blu-ray Disc™ /
DVD Player
Operating Instructions
Hookups and Settings
Playback
Internet
Settings and Adjustments
Additional Information
BDP-S790
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
The AC power cord must be changed only at a
qualified service shop.
Batteries or batteries installed apparatus shall not
be exposed to excessive heat such as sunshine,
fire or the like.
CAUTION
The use of optical instruments with this product
will increase eye hazard. As the laser beam used
in this Blu-ray Disc/DVD player is harmful to
eyes, do not attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
Precautions
• To prevent fire or shock hazard, do not place
objects filled with liquids, such as vases, on the
apparatus.
• Install this unit so that the AC power cord can
be unplugged from the wall socket immediately
in the event of trouble.
Operation is subject to the following two
conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference
received,
including interference that may cause undesired
operation of the device.
FCC WARNING
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
This transmitter must not be co-located or
operating in conjunction with any other
antenna or transmitter.
This label is located on the laser protective
housing inside the enclosure.
The shielded Interface cable (LAN cable)
must be used with the equipment in order to
comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC
Rules.
b
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
2
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio
frequency (RF) Exposure Guidelines in
Supplement C to OET65. This equipment
should be installed and operated keeping the
radiator at least 20cm or more away from
person’s body (excluding extremities: hands,
wrists, feet and ankles).
Contains FCC ID : EW4DWMW069
Important Safety Instructions
1)
2)
3)
4)
5)
6)
7)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11)Only use attachments/accessories specified by
the manufacturer.
12)Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms
or when unused for long periods of time.
14)Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Owner’s Record
The model and serial numbers are located at the
rear of the unit. Record the serial number in the
space provided below. Refer to them whenever
you call upon your Sony dealer regarding this
product.
Model No.______________
Serial No.______________
For customers in the USA
If this product is not working properly, please call
1-866-909-7669.
3
Precautions
This equipment has been tested and found to
comply with the limits set out in the EMC
Directive using a connection cable shorter
than 3 meters.
On placement
• Place the player in a location with adequate
ventilation to prevent heat build-up in the
player.
• Do not place the player on a soft surface
such as a rug that might block the ventilation
holes.
• Do not install this player in a confined space,
such as a bookshelf or similar unit.
• Do not place the player in a location near
heat sources, or in a place subject to direct
sunlight, excessive dust, or mechanical
shock.
• Do not place the player outdoors, in
vehicles, on ships, or on other vessels.
• If the player is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense on the
lenses inside the player. Should this occur,
the player may not operate properly. In this
case, remove the disc and leave the player
turned on for about half an hour until the
moisture evaporates.
• Do not install the player in an inclined
position. It is designed to be operated in a
horizontal position only.
• Do not place metal objects in front of the
front panel. It may limit reception of radio
waves.
• Do not place the player in a place where
medical equipment is in use. It may cause a
malfunction of medical instruments.
• If you use a pacemaker or other medical
device, consult your physician or the
manufacturer of your medical device before
using the wireless LAN function.
• Do not place heavy or unstable objects on
the player.
• Do not place any objects other than discs on
the disc tray. Doing so may cause damage to
the player or the object.
4
• Take out any discs when you move the
player. If you don’t, the disc may be
damaged.
• Disconnect the AC power cord and all other
cables from the player when you move the
player.
On power sources
• The player is not disconnected from the AC
power source as long as it is connected to the
wall outlet, even if the player itself has been
turned off.
• Disconnect the player from the wall outlet if
you are not going to use the player for a long
time. To disconnect the AC power cord,
grasp the plug itself; never pull the cord.
• Observe following points to prevent the AC
power cord being damaged. Do not use the
AC power cord if it is damaged, as doing so
may result in an electric shock or fire.
– Do not pinch the AC power cord between
the player and wall, shelf, etc.
– Do not put anything heavy on the AC
power cord or pull on the AC power cord
itself.
On adjusting volume
Do not turn up the volume while listening to a
section with very low level inputs or no audio
signals. If you do, your ears and the speakers
may be damaged when a peak level section is
played.
On cleaning
Clean the cabinet, panel, and controls with a
soft cloth. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or
benzine.
On cleaning discs, disc/lens cleaners
Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may
cause the apparatus to malfunction.
On replacement of parts
In the events that this player is repaired,
repaired parts may be collected for reuse or
recycling purposes.
On connecting to the HDMI OUT jack
Observe the following as improper handling
may damage the HDMI OUT jack and the
connector.
• Carefully align the HDMI OUT jack on the
rear of the player and the HDMI connector
by checking their shapes. Make sure the
connector is not upside down or tilted.
• Be sure to disconnect the HDMI cable when
moving the player.
allowing young children to watch 3D video
images.
Adults should supervise young children to
ensure they follow the recommendations
listed above.
IMPORTANT NOTICE
Caution: This player is capable of holding
a still video image or on-screen display
image on your television screen
indefinitely. If you leave the still video
image or on-screen display image
displayed on your TV for an extended
period of time you risk permanent damage
to your television screen. Plasma display
panel televisions and projection
televisions are susceptible to this.
If you have any questions or problems
concerning your player, please consult your
nearest Sony dealer.
• Hold the HDMI connector straight when
connecting or disconnecting the HDMI
cable. Do not twist or force the HDMI
connector into the HDMI OUT jack.
On watching 3D video images
Some people may experience discomfort
(such as eye strain, fatigue, or nausea) while
watching 3D video images. Sony recommends
that all viewers take regular breaks while
watching 3D video images. The length and
frequency of necessary breaks will vary from
person to person. You must decide what works
best. If you experience any discomfort, you
should stop watching the 3D video images
until the discomfort ends; consult a doctor if
you believe necessary. You should also
review (i) the instruction manual and/or the
caution message of any other device used
with, or Blu-ray Disc contents played with this
product and (ii) our website (http://
esupport.sony.com/) for the latest
information. The vision of young children
(especially those under six years old) is still
under development. Consult your doctor (such
as a pediatrician or eye doctor) before
Copy Protection
Please be advised of the advanced content
protection systems used in both Blu-ray
Disc™ and DVD media. These systems,
called AACS (Advanced Access Content
System) and CSS (Content Scramble System),
may contain some restrictions on playback,
analog output, and other similar features. The
operation of this product and the restrictions
placed may vary depending on the date of
purchase, as the governing board of the AACS
may adopt or change its restriction rules after
the time of purchase.
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some
commercially-produced film and videos and their
soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be
displayed and playback or copying will be
interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com.
5
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138,
USA.
Copyrights and Trademarks
• “AVCHD” and the “AVCHD 3D/
Progressive” logo are trademarks of
Panasonic Corporation and Sony
Corporation.
• Java is a trademark of Oracle and/or its
affiliates.
•
, “XMB,” and “xross media bar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
• This product incorporates High-Definition
Multimedia Interface (HDMI™)
technology. HDMI, the HDMI logo and
High-Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
• “Blu-ray Disc,” “DVD+RW,” “DVD-RW,”
“DVD+R,” “DVD-R,” “DVD VIDEO,”
“Super Audio CD,” and “CD” logos are
trademarks.
• “BD-LIVE,” “BD-LIVE” logo, and
“BONUSVIEW” are trademarks of Blu-ray
Disc Association.
• “Blu-ray 3D” and “Blu-ray 3D” logo are
trademarks of Blu-ray Disc Association.
• “x.v.Color” and “x.v.Color” logo are
trademarks of Sony Corporation.
• “BRAVIA” is a trademark of Sony
Corporation.
• “PhotoTV HD” and the “PhotoTV HD” logo
are trademarks of Sony Corporation.
• MPEG Layer-3 audio coding technology
and patents licensed from Fraunhofer IIS
and Thomson.
• This product incorporates proprietary
technology under license from Verance
Corporation and is protected by U.S. Patent
7,369,677 and other U.S. and worldwide
patents issued and pending as well as
copyright and trade secret protection for
certain aspects of such technology. Cinavia
is a trademark of Verance Corporation.
Copyright 2004-2010 Verance Corporation.
6
All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
• Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.
This product contains technology subject to
certain intellectual property rights of
Microsoft. Use or distribution of this
technology outside of this product is
prohibited without the appropriate license(s)
from Microsoft.
Content owners use Microsoft PlayReady™
content access technology to protect their
intellectual property, including copyrighted
content. This device uses PlayReady
technology to access PlayReady-protected
content and/or WMDRM-protected content.
If the device fails to properly enforce
restrictions on content usage, content
owners may require Microsoft to revoke the
device’s ability to consume PlayReadyprotected content. Revocation should not
affect unprotected content or content
protected by other content access
technologies. Content owners may require
you to upgrade PlayReady to access their
content. If you decline an upgrade, you will
not be able to access content that requires
the upgrade.
• This product meets ENERGY STAR®
guidelines for energy efficiency.
ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks. ENERGY
STAR is a registered mark owned by the
U.S. government.
• Music and video recognition technology and
related data are provided by Gracenote®.
Gracenote is the industry standard in music
recognition technology and related content
delivery. For more information, please visit
www.gracenote.com.
CD, DVD, Blu-ray Disc, and music and
video-related data from Gracenote, Inc.,
copyright © 2000-present Gracenote.
Gracenote Software, copyright © 2000present Gracenote. One or more patents
owned by Gracenote apply to this product
and service. See the Gracenote website for a
nonexhaustive list of applicable Gracenote
patents. Gracenote, CDDB, MusicID,
MediaVOCS, the Gracenote logo and
logotype, and the “Powered by Gracenote”
logo are either registered trademarks or
trademarks of Gracenote in the United
States and/or other countries.
Opera Browser
Opera(r) Browser from Opera Software ASA.
Copyright 1995-2010 Opera Software ASA. All
rights reserved.
• This product includes SkypeKit Version 3
Copyright 2003-2010, Skype Limited
Patents Pending
Skype, associated trade marks and logos and
the “S” symbol are trade marks of Skype
Limited.
• Wi-Fi®, Wi-Fi Protected Access® and WiFi Alliance® are registered marks of the WiFi Alliance.
• Wi-Fi CERTIFIED™, WPA™, WPA2™
and Wi-Fi Protected Setup™ are marks of
the Wi-Fi Alliance.
• The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi Alliance.
• The Wi-Fi Protected Setup Mark is a mark
of the Wi-Fi Alliance.
• DLNA®, the DLNA Logo and DLNA
CERTIFIED™ are trademarks, service
marks, or certification marks of the Digital
Living Network Alliance.
• All other trademarks are trademarks of their
respective owners.
• Other system and product names are
generally trademarks or registered
trademarks of the manufacturers. ™ and ®
marks are not indicated in this document.
End User License Information
Gracenote® End User License
Agreement
This application or device contains software from
Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote (the
“Gracenote Software”) enables this application to
perform disc and/or file identification and obtain
music-related information, including name, artist,
track, and title information (“Gracenote Data”)
from online servers or embedded databases
(collectively, “Gracenote Servers”) and to
perform other functions. You may use Gracenote
Data only by means of the intended End-User
functions of this application or device.
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only.
You agree not to assign, copy, transfer or transmit
the Gracenote Software or any Gracenote Data to
any third party. YOU AGREE NOT TO USE OR
EXPLOIT GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR
GRACENOTE SERVERS, EXCEPT AS
EXPRESSLY PERMITTED HEREIN.
You agree that your non-exclusive license to use
the Gracenote Data, the Gracenote Software, and
Gracenote Servers will terminate if you violate
these restrictions. If your license terminates, you
agree to cease any and all use of the Gracenote
Data, the Gracenote Software, and Gracenote
Servers. Gracenote reserves all rights in
Gracenote Data, the Gracenote Software, and the
Gracenote Servers, including all ownership
rights. Under no circumstances will Gracenote
become liable for any payment to you for any
information that you provide. You agree that
Gracenote, Inc. may enforce its rights under this
Agreement against you directly in its own name.
The Gracenote service uses a unique identifier to
track queries for statistical purposes. The purpose
of a randomly assigned numeric identifier is to
allow the Gracenote service to count queries
without knowing anything about who you are.
For more information, see the web page for the
Gracenote Privacy Policy for the Gracenote
service.
The Gracenote Software and each item of
Gracenote Data are licensed to you “AS IS.”
Gracenote makes no representations or
warranties, express or implied, regarding the
accuracy of any Gracenote Data from in the
Gracenote Servers. Gracenote reserves the right
to delete data from the Gracenote Servers or to
change data categories for any cause that
7
Gracenote deems sufficient. No warranty is made
that the Gracenote Software or Gracenote Servers
are error-free or that functioning of Gracenote
Software or Gracenote Servers will be
uninterrupted. Gracenote is not obligated to
provide you with new enhanced or additional data
types or categories that Gracenote may provide in
the future and is free to discontinue its services at
any time.
GRACENOTE DISCLAIMS ALL
WARRANTIES EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT. GRACENOTE DOES NOT
WARRANT THE RESULTS THAT WILL BE
OBTAINED BY YOUR USE OF THE
GRACENOTE SOFTWARE OR ANY
GRACENOTE SERVER. IN NO CASE WILL
GRACENOTE BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES OR FOR ANY LOST PROFITS OR
LOST REVENUES.
© Gracenote, Inc. 2009
8
Table of Contents
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Hookups and Settings
Step 1: Connecting the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Step 2: Preparing for Network Connection . . . . . . . . . . . . . . . . . . 18
Step 3: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Playback
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Playing from a USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Playing via a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Available Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Internet
Browsing Websites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Enjoying Skype . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Settings and Adjustments
Using the Settings Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Network Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Screen Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
BD/DVD Viewing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Parental Control Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Music Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Additional Information
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
9
Guide to Parts and Controls
Front panel
A [/1 (on/standby)
Turns on the player, or sets to
standby mode.
B Disc tray
C Front panel display
N, X: Lights up during playback
or pause.
: Lights up when enabling the
repeat setting.
: Lights up when outputting
720p/1080i/1080p video signals.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent it
being opened by mistake.
When the player is turned on, hold down
N on the player for more than 10
seconds. The disc tray is locked or
unlocked.
About soft-touch buttons/indicators
E N (play)
These buttons, 4, 5 and 6, function
when the soft-touch button indicators are
lit.
You can turn on/off the indicators by
setting [Dimmer] in the [System
Settings] setup (page 35).
F x (stop)
b
D Z (open/close)
G
(USB) jack
Connect a USB device to this jack.
H Remote sensor
These buttons work when you touch them
lightly. Do not press them with excessive
force.
z
These buttons still work, even if you turn off
the indicators by setting [Dimmer] to [Off].
10
Rear panel
A LINE OUT (VIDEO) jack
B DIGITAL OUT (COAXIAL)
jack
E DIGITAL OUT (OPTICAL)
jack
F LINE OUT (R-AUDIO-L) jacks
C Ventilation holes
G HDMI OUT 1 jack
D CONTROL S IN / IR IN jack
H HDMI OUT 2 jack
If you have a CONTROL Scompatible Sony TV or AV
amplifier (receiver), use a
CONTROL S cable (not supplied) to
connect to the CONTROL S
(output) jack. Refer to the
instruction manual supplied with
your TV or AV amplifier (receiver).
I
(USB) jack
J LAN (100) terminal
11
The player automatically returns to
standby mode
Remote
The available functions of the remote
differ depending on the disc or the
situation.
If any button on the player or remote is
not pressed for more than 30 minutes, the
player automatically returns to standby
mode.
A Z OPEN/CLOSE
Opens or closes the disc tray.
TV
INPUT
OPEN/
CLOSE
-TV- INPUT
VOL
DISPLAY
AUDIO
YELLOW BLUE
3D
SUBTITLE
RED
GREEN
PU
ENU
TOP
P/M
ME
N
PO
OP
T
ION
S
N
UR
RET
REPLAY ADVANCE NEXT
PAUSE
[/1 (on/standby)
B Number buttons (0 - 9)
Enters the title/chapter numbers, etc.
VOL +/–
DISPLAY (page 21)
Displays the playback and web
browsing information on the screen.
PLAY
NETFLIX
Turns on the TV, or sets to standby
mode.
Adjusts the TV volume.
HOME
PREV
-TV- [/1 (on/standby)
Turns on the player, or sets to
standby mode.
SEN
U
Switches between TV and other
input sources.
STOP
AUDIO (page 34)
Selects the language track when
multi-lingual tracks are recorded on
BD-ROMs/DVD VIDEOs.
Selects the sound track on CDs.
3D (page 24)
z
Number 5, AUDIO, VOL +, and N PLAY
buttons have a tactile dot. Use the tactile dot as
a reference when operating the player.
12
Converts 2D content into simulated
3D content when connected to 3Dcompatible devices.
SUBTITLE (page 34)
Selects the subtitle language when
multi-lingual subtitles are recorded
on BD-ROMs/DVD VIDEOs.
C Color buttons (YELLOW/
BLUE/RED/GREEN)
Shortcut keys for interactive
functions.
D TOP MENU
Opens or closes the BD’s or DVD’s
Top Menu.
SEN
Accesses the “Sony Entertainment
Network™” online service.
POP UP/MENU
Each time you press the button
during playback of videos, the
search speed changes.
• Plays in slow motion, when
pressed for more than one second
in pause mode.
• Plays one frame at a time, when
pressed briefly in pause mode.
z
During Blu-ray 3D Disc playback, slowmotion reverse play and single-frame
reverse play are not available.
Opens or closes the BD-ROM’s
Pop-up Menu, or the DVD’s menu.
N PLAY
OPTIONS (page 24)
NETFLIX
The options menu that can be
selected appears on the screen.
Accesses the “NETFLIX” online
service.
HOME
X PAUSE
Enters the player’s home menu.
Displays the wallpaper when
pressed on the category icon of the
home menu.
Pauses or re-starts playback.
RETURN
Returns to the previous display.
</M/m/,
Starts or re-starts playback.
x STOP
Stops playback and remembers the
stop point (resume point).
The resume point for a title/track is
the last point you played or the last
photo for a photo folder.
Moves the highlight to select a
displayed item.
Center button (ENTER)
Enters the selected item.
E . PREV/NEXT >
Skips to the previous/next chapter,
track, or file.
REPLAY/ADVANCE
Briefly replays the current scenes for
10 seconds/briefly fast forwards the
current scenes for 15 seconds.
m/M (fast/slow/freeze
frame)
• Fast reverses/fast forwards the disc
when pressed during playback.
13
Home menu display
The home menu appears when you press
HOME. Select a category using </,.
Select an item using M/m, then press
ENTER.
Item
Category
[Setup]: Adjusts the player settings.
[Photo]: Displays photos.
[Music]: Plays music.
[Video]: Plays videos.
[Network]: Displays network items.
14
Hookups and Settings
Step 1: Connecting the Player
Do not connect the AC power cord until you have made all the other connections.
For supplied accessories, see “Supplied accessories” (page 43).
High Speed HDMI Cable*1
(not supplied)
Hookups and Settings
Connecting to your TV
Select one of the following connection methods according to the input jacks on your
TV.
Match the color of the plug to that of the jack when connecting.
High quality
Audio/video cable (supplied)
Standard
quality
b
Do not connect the player through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.
15
Connecting to your AV amplifier (receiver)
Select one of the following connection methods according to the input jacks on your
AV amplifier (receiver). When you select A or B, make the appropriate settings in
the [Audio Settings] setup (page 33).
High Speed HDMI Cable*1
(not supplied)
High Speed HDMI Cable
(not supplied)
*2
*1
t Set [BD Audio MIX Setting] (page 33).
Coaxial digital cable (not supplied)
or
Optical digital cable (not supplied)
t Set [Dolby Digital]*3/[DTS]*4 (page 34).
Audio/video cable (supplied)
16
About AV Separation Mode
*1
U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTSHD and the Symbol together are registered
trademarks & DTS-HD Master Audio is a
trademark of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.
Hookups and Settings
This mode allows you to output video
signals via the HDMI OUT 1 jack and
audio signals via the HDMI OUT 2 jack
separately (page 36).
Example:
The illustration below shows an example
where a TV (3D-compatible) and an AV
amplifier (not 3D-compatible) are
connected.
*1
AV amplifier
(not 3D-compatible) TV (3D-compatible)
*1
Use a High Speed HDMI Cable. We
recommend using a Sony HDMI cable
(available at your nearest Sony dealer or
local authorized Sony service facility, with
part number 1-834-169-22, as of February
2012, or equivalent).
*2 To enjoy 3D viewing, connect a TV and an
AV amplifier that are both 3D-compatible.
*3 Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D
symbol are trademarks of Dolby
Laboratories.
*4 Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380;
6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 & other
17
Before setting the network settings
Step 2: Preparing for
Network Connection
Wired Setup
Use a LAN cable to connect to the LAN
(100) terminal on the player.
When your wireless LAN router (access
point) is Wi-Fi Protected Setup (WPS)compatible, you can easily set the
network settings with the WPS button.
If not, check the following information
in advance, and record it in the space
provided below.
– The network name (SSID*1) that
identifies your network*2.
SSID*1:
LAN cable
(not supplied)
– If security is set on your wireless
network, the security key (WEP key,
WPA key)*2.
Security key:
Broadband
router
ADSL modem/ Internet
Cable modem
z
Using a shielded interface cable (LAN cable)
is recommended.
Wireless Setup
Use the wireless LAN that is built into
the player.
LAN cable
(not supplied)
Wireless
LAN router
ADSL modem/ Internet
Cable modem
z
Use a wireless LAN router supporting
802.11b/g or 802.11b/g/n.
18
*1
SSID (Service Set Identifier) is a name that
identifies a particular wireless network.
*2 You need to check the setting of your
wireless LAN router for information about
the SSID and security key.
For details:
– visit the following website:
http://www.sony.com/bluraysupport/
– refer to the instruction manual supplied
with the wireless LAN router
– consult the manufacturer of the wireless
LAN router.
Step 3: Easy Setup
5
Perform [Easy Setup].
Follow the on-screen instructions to
make the basic settings using </M/
m/, and ENTER on the remote.
When turned on for the first time
Wait for a short while before the
player turns on and starts [Easy
Setup].
</M/m/,
ENTER
Insert two Size AA (R6) batteries
by matching the 3 and # ends on
the batteries to the markings
inside the battery compartment.
2
Plug the player into the AC outlet.
Hookups and Settings
1
to AC outlet
3
Press [/1 to turn on the player.
4
Turn on the TV, then switch the
input selector on your TV so that
the signal from the player appears
on your TV screen.
19
1
Playback
As your local storage, use a 1 GB or
larger USB memory.
Playing a Disc
For playable discs, see “Playable discs”
(page 43).
1
Switch the input selector on your
TV so that the signal from the
player appears on your TV screen.
2
Press Z OPEN/CLOSE, and place
a disc on the disc tray.
Playing side facing down
3
Press Z OPEN/CLOSE to close the
disc tray.
Playback starts.
If playback does not start
automatically, select
in the
[Video],
[Music], or
[Photo]
category, and press ENTER.
Enjoying BONUSVIEW/BDLIVE
Some BD-ROMs with the “BD-LIVE”
logo* have bonus content and other data
that can be downloaded for enjoyment.
*
20
Connect a USB memory to the
USB jack on the rear of the player
(page 11).
2
Prepare for BD-LIVE (BD-LIVE
only).
• Connect the player to a network
(page 18).
• Set [BD Internet Connection] to
[Allow] (page 35).
3
Insert a BD-ROM with
BONUSVIEW/BD-LIVE.
The operation method differs
depending on the disc. Refer to the
instruction manual supplied with the
disc.
z
To delete data in the USB memory, select
[Erase BD Data] in the
[Video], and press
ENTER. All data stored in the buda folder
will be erased.
Enjoying Blu-ray 3D
You can enjoy a Blu-ray 3D Disc with
the “Blu-ray 3D” logo*.
*
1
Prepare for Blu-ray 3D Disc
playback.
• Connect the player to your 3Dcompatible devices using a High
Speed HDMI cable.
• Set [3D Output Setting] and [TV
Screen Size Setting for 3D] in the
[Screen Settings] setup (page 32).
2
Insert a Blu-ray 3D Disc.
The operation method differs
depending on the disc. Refer to the
instruction manual supplied with the
disc.
E Playback information
Displays the Play mode, Playing
status bar, Disc type, Video codec,
Bitrate, Repeat type, Elapsed time,
and Total playing time.
F Chapter number
z
Refer also to the instruction manuals supplied
with your TV and the connected device.
Playing from a USB
Device
You can check playback information,
etc., by pressing DISPLAY.
The displayed information differs
depending on the disc type and player
status.
You can play video/music/photo files on
the connected USB device.
For playable USB devices, see “Playable
types of files” (page 44).
Example: when playing a BD-ROM
1
Playback
Displaying the play
information
G The currently selected angle
Connect the USB device to the
USB jack on the player (page 10).
Refer to the instruction manual
supplied with the USB device before
connecting.
2
Select
[Video],
[Music],
or
[Photo] on the home menu
using </,.
3
Select
[USB device (front)]
using M/m, and press ENTER.
A Output resolution/Video
frequency
B Title number or name
C The currently selected audio
setting
D Available functions (
angle,
audio,
subtitle)
21
Playing via a Network
Enjoying Sony
Entertainment Network
(SEN)
Serves as a gateway delivering the
selected Internet content and a variety of
on-demand entertainment straight to
your player.
z
• Some Internet content requires registration
via a PC before it can be played.
For further details, visit the following
website:
http://www.sony.com/bluraysupport/
• Some Internet content may not be available
in some regions/countries.
1
2
3
B Playing status bar
Status bar, Cursor indicating the
current position, Playing time,
Duration of the video file
C Network condition
indicates the signal strength for
wireless connection.
indicates the wired
connection.
Connect the player to a network
(page 18).
D Network transmission speed
Press SEN.
F The currently selected video file
name
Select the Internet content and a
variety of on-demand
entertainment using </M/m/,,
and press ENTER.
To use the control panel during video
streaming
The control panel appears when a video
file starts playing. The displayed items
may differ depending on the Internet
content provider.
To display again, press DISPLAY.
22
A Control display
Press </M/m/, or ENTER for
playback operations.
E The next video file name
Playing files on a Home
Network (DLNA)
The player (DLNA Player) can play
video/music/photo files stored on
another DLNA-compatible product
(DLNA Server) via a network.
Server
Player
1
Prepare for using DLNA.
• Connect the player to a network
(page 18).
• Prepare the other necessary
DLNA-compatible products.
Refer to the instruction manual
supplied with the product.
Select the DLNA Server icon from
[Video], [Music], or
[Photo] on the home menu.
3
Select the file you want to play
using M/m, and press ENTER.
PARTY host
PARTY guest
PARTY guest
1
• Connect the player to a network
(page 18).
• Connect the products which are
compatible with the PARTY
STREAMING function to a
network.
To control the player using another
product (Renderer)
When you play files from a DLNA
Server on the player, you can use a
DLNA Controller-compatible product (a
phone, etc.) to control playback.
Server
Prepare for PARTY STREAMING.
2
Select a track in
home menu.
3
Select [Start PARTY] from the
options menu.
Playback
2
with DLNA and the PARTY
STREAMING function, or vice versa.
[Music] on the
Renderer
To join in a PARTY (for the PARTY
guest only)
Controller
z
Refer to the instruction manual supplied with
the DLNA Controller.
Playing the same music in
different rooms (PARTY
STREAMING)
Select
[PARTY] in [Music], then
select the PARTY host device icon.
To close the PARTY
Select [Close PARTY] from the options
menu.
z
The sale and lineup of products that are
compatible with the PARTY STREAMING
function differ depending on the area.
You can play music files on the player
(PARTY host) in other rooms
simultaneously through Sony products
(PARTY guest) which are compatible
23
Searching for the video/
music information
To search for further related
information
Select an item in the lists, then select the
service for searching.
You can acquire content information
based on Gracenote technology and
search for the related information.
1
Connect the player to a network
(page 18).
2
Insert a disc you want to search.
• Video: For a BD-ROM or DVDROM only
• Music: For a CD-DA only
3
4
Select
[Video] or
using </,.
[Music]
Select
[Video Search] or
[Music Search] using M/m,
and press ENTER.
Available Options
Various settings and playback
operations are available by pressing
OPTIONS. The available items differ
depending on the situation.
Common options
Item
Details
Repeat
Setting
Sets the repeat mode.
3D Menu
• Simulated 3D:
Adjusts the simulated
3D effect.
• 3D Depth
Adjustment: Adjusts
the depth of 3D
image.
Play/Stop
Starts or stops the
playback.
Play from
beginning
Plays the item from the
beginning.
The content information is
displayed.
Example: List of the selected cast’s
works
[Video] only
A Content details
Displays a list of related
information, such as title, cast, track,
or artist.
B Playback History
Displays a title in playback history
of a BD-ROM/DVD-ROM/CD-DA.
C Search History
Displays a list of search history.
24
Item
Details
3D Output
Setting
Sets whether or not to
output 3D video
automatically.
A/V SYNC
Adjusts the gap
between picture and
sound, by delaying the
sound output in relation
to the picture output (0
to 120 milliseconds).
Item
Details
Pause
Pauses the playback.
Top Menu
Displays the BD’s or
DVD’s Top Menu.
Menu/Popup
Menu
Displays the BDROM’s Pop-up Menu
or DVD’s menu.
Title Search
Searches for a title on
BD-ROMs/DVD
VIDEOs and starts
playback from the
beginning.
Chapter
Search
Searches for a chapter
and starts playback
from the beginning.
Item
Details
Angle
Switches to other
viewing angles when
multi-angles are
recorded on BDROMs/DVD VIDEOs.
IP Content NR Adjusts the picture
Pro
quality of Internet
content.
Video Search
Displays information
on the BD-ROM/DVDROM based on
Gracenote technology.
[Music] only
Item
Details
Add
Slideshow
BGM
Registers music files in
the USB memory as
slideshow background
music (BGM).
Start PARTY
Starts a PARTY with
the selected source.
This item may not
appear, depending on
the source.
Playback
Video Settings • Picture Quality
Mode: Selects the
picture settings.
• Texture Remaster:
Adjusts the sharpness
and detail of the
edges.
• Super Resolution:
Improves the
resolution.
• Smoothing: Reduces
on-screen banding by
smoothing gradations
on flat areas.
• Contrast Remaster:
Automatically
arranges the black
and white levels so
that the screen is not
too dark and the
image is modulated.
• Clear Black: Adjusts
the display of the dark
elements of the
image. All shading is
not suppressed; it
allows beautifully
reproduced black
tones.
Leave PARTY Leaves from a PARTY
which the player is
participating in. The
PARTY STREAMING
function continues
among other
participating products.
Close PARTY Closes a PARTY which
the player is
participating in. The
PARTY STREAMING
function ends for all
other participating
products.
Music Search
Displays information
on the CD-DA based on
Gracenote technology.
25
[Photo] only
26
Item
Details
Slideshow
Speed
Changes the slideshow
speed.
Slideshow
Effect
Sets the effect for
slideshows.
Slideshow
BGM
• Off: Turns off the
function.
• My Music from USB:
Sets the music files
registered in [Add
Slideshow BGM].
• Play from Music CD:
Sets the tracks in CDDAs.
Change
Display
Switches between [Grid
View] and [List View].
Slideshow
Plays a slideshow.
Rotate Left
Rotates the photo
counterclockwise by
90 degrees.
Rotate Right
Rotates the photo
clockwise by 90
degrees.
To quit the Internet browser
Internet
Browsing Websites
You can connect to the Internet and
enjoy websites.
Connect the player to a network
(page 18).
2
Select
[Network] on the home
menu using </,.
3
Select
[Internet Browser]
using M/m, and press ENTER.
z
Some websites use functions which this
browser does not support. Some websites may
not be displayed correctly, or may not
function.
To enter a URL
Select [URL entry] from the options
menu. Enter the URL using the software
keyboard, then select [Enter].
To set the default start page
Internet browser display
You can check the website information
by pressing DISPLAY.
The display information differs
depending on the website and page
status.
Internet
1
Press HOME.
A Page title
B Page address
C Cursor
To view a linked site, press </M/
m/, to move the cursor, and press
ENTER.
D SSL icon
Appears when the website is
secured.
While displaying the page you want to
set, select [Set as start page] from the
options menu.
E Signal strength indicator (wireless
network connection only)
To return to the previous page
F Progress bar/Loading icon
Select [Previous page] from the options
menu.
When the previous page does not appear
even if you select [Previous page], select
[Window List] from the options menu
and select the page you want to return to
from the list.
G Text input field
Appears when the page is being
read, or during file download/
transfer.
Press ENTER and select [Input]
from the options menu to display the
software keyboard.
27
H Scroll bar
Press </M/m/, to move the page
display.
Available options
Various settings and operations are
available by pressing OPTIONS.
The available items differ depending on
the situation.
Item
Details
Browser
Setup
• Zoom: Increases or
decreases the size of
the displayed
contents.
• JavaScript Setup:
Enables or disables
JavaScript.
• Cookie Setup: Sets
whether or not to
accept cookies.
• SSL Alarm Display:
Enables or disables
SSL.
Input
Displays the software
keyboard to enter
characters while
browsing a website.
Break
Moves the cursor to the
next line in the text
input field.
Delete
Erases one character on
the left side of the
cursor during text input.
Window List
Displays a list of
currently opened
windows of website.
Allows you to return to
a previously displayed
website by selecting the
window.
Bookmark List Displays the bookmark
list.
28
Item
Details
URL entry
Allows you to enter a
URL when the software
keyboard is displayed.
Previous
page/Next
page
Moves to the previous/
next page.
Cancel
loading
Stops loading a page.
Reload
Reloads the same page.
Add to
Bookmark
Adds the currently
displayed website to the
bookmark list.
Set as start
page
Sets the currently
displayed website as the
default start page.
Open in new
window
Opens a link in a new
window.
Character
encoding
Sets the character code.
Display
certificate
View server certificates
sent from pages that
support SSL.
Enjoying Skype
Skype is a communication software
using the Internet.
You can enjoy Skype-to-Skype video
calls/voice calls for free with the player.
PC
1
Prepare for Skype.
• Connect the player to a network
(page 18).
• Connect the web camera with
microphone to the USB jack
(page 10).
C Tab area
• Contacts: Displays the contacts to
call.
• History: Displays the call history.
• Tools: Enables useful functions
such as contact search.
• Settings
2
Select
[Network] on the home
menu using </,.
To make a call
3
Select [Skype] using M/m, and
press ENTER.
Select the contact icon you want to call
in the Skype menu, and press ENTER.
z
For information about available web cameras,
visit the following website:
http://www.sony.com/bluraysupport/
To receive a call
Activate Skype and sign in.
To quit Skype
Press HOME.
Once you sign in, your password will be
saved in the player when you quit Skype.
To delete your password, sign out of
Skype before quitting.
Internet
When you start Skype for the first
time, follow the on-screen
instructions and sign in to use
Skype. If you do not have your own
account, create one.
To sign in using another account
Using the Skype menu
Select [Sign Out] from the options menu.
Select
on the home menu, and follow
the on-screen instructions.
After signing-in, you can make/receive a
call or make Skype settings.
Skype display
A Your Skype name
B Signal strength indicator (wireless
network connection only)
A Contact name
B Video of the contact (for video
calls only)
29
C Signal strength indicator/Network
transmission speed (wireless
network connection only)
D Video of yourself (for video calls
only)
E Available buttons
The available buttons differ
depending on the situation.
• Full screen/Window screen:
Changes the display mode.
• Hang Up
• Hold/Resume
• Mute/Unmute
• Start My Video/Stop My Video:
Displays/hides the video of
yourself.
• Voice call/Video call
Available options
Various settings and operations are
available by pressing OPTIONS.
The available items differ depending on
the situation.
30
Item
Details
Change
Display
Changes the display for
contact/history.
Change
Status
Changes the Skype
status.
Sign Out
Exits Skype.
About Skype
Displays the copyright
screen.
Help
Displays the Skype
help.
Icon
Settings and Adjustments
Using the Settings
Displays
Select
[Setup] on the home menu
when you need to change the settings of
the player.
The default settings are underlined.
Select
[Setup] on the home
menu using </,.
2
Select the setup category icon
using M/m, and press ENTER.
Icon
Explanation
Network Update
(page 31)
Updates the software of the
player.
Screen Settings
(page 32)
Makes the video settings
according to the type of
connecting jacks.
Audio Settings
(page 33)
Makes the audio settings
according to the type of
connecting jacks.
Music Settings
(page 35)
Makes detailed settings for
Super Audio CD playback.
System Settings
(page 35)
Makes the player-related
settings.
Network Settings
(page 36)
Makes detailed settings for
the Internet and network.
Easy Setup (page 37)
Re-runs the Easy Setup to
make the basic settings.
Resetting (page 37)
Resets the player to the
factory settings.
Network Update
Settings and Adjustments
1
Explanation
Select [OK] to update the player’s
software via the network.
z
• We recommend the network update every 2
months or so.
• For information about update functions,
visit the following website:
http://www.sony.com/bluraysupport/
BD/DVD Viewing
Settings (page 34)
Makes detailed settings for
BD/DVD playback.
Parental Control
Settings (page 35)
Makes detailed settings for
the Parental Control
function.
31
Screen Settings
Pan & Scan: Displays a full-height
picture on the entire screen, with
trimmed sides.
3D Output Setting
Auto: Normally select this.
Off: Select this to display all content in
2D.
z
If you enjoy 4K/24p 3D contents, set to [Off]
in [3D Output Setting].
TV Screen Size Setting for 3D
Sets the screen size of your 3Dcompatible TV.
TV Type
16:9: Select this when connecting to a
wide-screen TV or a TV with a wide
mode function.
4:3: Select this when connecting to a 4:3
screen TV without a wide mode
function.
Screen Format
Full: Select this when connecting to a
TV with a wide mode function.
Displays a 4:3 screen picture in 16:9
aspect ratio, even on a wide-screen
TV.
Normal: Changes the picture size to fit
the screen size with the original
picture aspect ratio.
DVD Aspect Ratio
Letter Box: Displays a wide picture with
black bands on the top and bottom.
32
Cinema Conversion Mode
Auto: Normally select this. The player
automatically detects whether the
material is video-based or filmbased, and switches to the
appropriate conversion method.
Video: The conversion method suited for
video-based material will always be
selected, regardless of the material.
Output Video Format
HDMI: Normally select [Auto]. Select
[Original Resolution] to output the
resolution recorded on the disc.
When the resolution is lower than
the SD resolution, it is scaled up to
the SD resolution.
Video: Automatically sets the lowest
resolution.
BD-ROM 24p Output
Auto: Outputs 1080/24p or 4K/24p
video signals only if you connect a
1080/24p or 4K/24p-compatible TV
with the HDMI OUT jack.
On: Select this if your TV is compatible
with 1080/24p or 4K/24p video
signals.
Off: Select this if your TV is not
compatible with 1080/24p or 4K/
24p video signals.
DVD-ROM 24p Output
Auto: Outputs 1080/24p or 4K/24p
video signals only if you connect a
1080/24p or 4K/24p-compatible TV
with the HDMI OUT jack.
Off: Select this if your TV is not
compatible with 1080/24p or 4K/
24p video signals.
4K Output
YCbCr/RGB (HDMI)
Auto: Automatically detects the
connected TV type, and switches to
the matching color setting.
YCbCr (4:2:2): Outputs YCbCr 4:2:2
video signals.
YCbCr (4:4:4): Outputs YCbCr 4:4:4
video signals.
RGB: Outputs RGB video signals.
HDMI Deep Color Output
Auto: Normally select this.
16bit/12bit/10bit: Outputs 16bit/12bit/
10bit video signals when the
connected TV is compatible with
Deep Color.
Off: Select this when the picture is
unstable or colors appear unnatural.
SBM (Super Bit Mapping)
On: Smooths the gradation of video
signals output from the HDMI OUT
jack.
Pause Mode
Auto: Normally select this. Dynamic
moving pictures appear without
blurring.
Frame: Displays static pictures at high
resolution.
Audio Settings
Audio (HDMI)
Auto: Normally select this. Outputs
audio signals according to the status
of the connected HDMI device.
PCM: Outputs PCM signals from the
HDMI OUT jack.
DSD Output Mode
Settings and Adjustments
Auto: Outputs 4K/24p video signals
automatically if you connect a 4K/
24p -compatible device and make
the appropriate settings in [BDROM 24p Output] or [DVD-ROM
24p Output], and also outputs 4K/
24p photo images if you play 2D
photo files.
Off: Turns off the function.
Off: Select this when outputting
distorted video signals or unnatural
color.
On: Outputs DSD signals from the
HDMI OUT jack when playing a
Super Audio CD. When [On] is
selected, no signal is output from
other jacks.
Off: Outputs PCM signals from the
HDMI OUT jack when playing a
Super Audio CD.
BD Audio MIX Setting
On: Outputs the audio obtained by
mixing the interactive and
secondary audio to the primary
audio.
Off: Outputs the primary audio only.
Select this to output HD audio
signals to an AV amplifier
(receiver).
33
Dolby Digital / DTS
Downmix PCM: Converts to output
Linear PCM signals. Select this
when connecting an audio device
without a built-in Dolby Digital/
DTS decoder.
Bitstream: Select this when connecting
an audio device with a built-in
Dolby Digital/DTS decoder.
DTS Neo:6
Cinema: Outputs the simulated multichannel sound from 2 channel
sources via the HDMI OUT jack
according to the capability of the
connected device using [DTS Neo:6
Cinema] mode.
Music: Outputs the simulated multichannel sound from 2 channel
sources via the HDMI OUT jack
according to the capability of the
connected device using [DTS Neo:6
Music] mode.
Off: Outputs the sound with its original
number of channels via the HDMI
OUT jack.
Audio DRC
Auto: Performs playback at the dynamic
range specified by the disc (BDROM only). Other discs are played
back at the [On] level.
On: Performs playback at a standard
compression level.
Off: No compression works. A more
dynamic sound is produced.
Downmix
Surround: Outputs audio signals with
surround effects. Select this when
connecting an audio device that
supports Dolby Surround (Pro
Logic) or DTS Neo:6.
34
Stereo: Outputs audio signals without
surround effects. Select this when
connecting an audio device that does
not support Dolby Surround (Pro
Logic) or DTS Neo:6.
BD/DVD Viewing
Settings
BD/DVD Menu Language
Selects the default menu language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language
Code], the display for entering the
language code appears. Enter the code
for your language by referring to
“Language code list” (page 47).
Audio Language
Selects the default track language for
BD-ROMs or DVD VIDEOs.
When you select [Original], the
language given priority in the disc is
selected.
When you select [Select Language
Code], the display for entering the
language code appears. Enter the code
for your language by referring to
“Language code list” (page 47).
Subtitle Language
Selects the default subtitle language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language
Code], the display for entering the
language code appears. Enter the code
for your language by referring to
“Language code list” (page 47).
BD Hybrid Disc Playback Layer
Internet Video Unrated
BD: Plays BD layer.
DVD/CD: Plays DVD or CD layer.
Allow: Allows the playback of unrated
Internet videos.
Block: Blocks the playback of unrated
Internet videos.
BD Internet Connection
Allow: Normally select this.
Do not allow: Prohibits Internet
connection.
Parental Control
Settings
Music Settings
Super Audio CD Playback Layer
Super Audio CD: Plays the Super Audio
CD layer.
CD: Plays the CD layer.
Super Audio CD Playback Channel
Sets or changes the password for the
Parental Control function. A password
allows you to set a restriction on BDROM or DVD VIDEO, and Internet
video playback. If necessary, you can
differentiate the restriction levels for
BD-ROMs, DVD VIDEOs, and Internet
videos.
DSD 2ch: Plays the 2ch area.
DSD Multi: Plays the multi-channel
area.
Parental Control Area Code
OSD Language
Playback of some BD-ROMs, DVD
VIDEOs, or Internet videos can be
limited according to the geographic area.
Scenes may be blocked or replaced with
different scenes. Follow the on-screen
instructions and enter your four-digit
password.
Selects your language for the player onscreen displays.
BD Parental Control/DVD Parental
Control/Internet Video Parental
Control
By setting Parental Control, scenes can
be blocked or replaced with different
scenes. Follow the on-screen
instructions and enter your four-digit
password.
System Settings
Settings and Adjustments
Password
Dimmer
Bright: Bright lighting.
Dark: Low lighting.
Off: Turns off the lighting during
playback. Low lighting other than
during playback.
Control for HDMI
On: The following BRAVIA Sync
features are available:
–One-Touch Play
–System Power-Off
–Language Follow
35
Off: Turns off the function.
Off: Turns off the function.
z
For details, refer to the instruction manual
supplied with the TV or components. To
enable the BRAVIA Sync features, connect
your TV via the HDMI OUT 1 jack.
Software Update Notification
On: Sets the player to inform you of
newer software version information
(page 31).
Off: Turns off the function.
HDMI: Linked to TV-off
On: Automatically turns off the player
and HDMI-compatible components
when the connected TV enters
standby mode (BRAVIA Sync).
Off: Turns off the function.
AV Separation Output Mode
On: Outputs video signals via the HDMI
OUT 1 jack and audio signals via the
HDMI OUT 2 jack separately.
Off: Outputs video signals and audio
signals simultaneously via both the
HDMI OUT 1 jack and the HDMI
OUT 2 jack.
Quick Start Mode
On: Shortens the startup time when
turning on the player.
Off: Reduces standby power
consumption.
Auto Display
On: Automatically displays information
on the screen when changing the
viewing titles, picture modes, audio
signals, etc.
Off: Displays information only when
you press DISPLAY.
Screen Saver
On: Turns on the screen saver function.
The screen saver image appears
when you do not use the player for
more than 10 minutes while an onscreen display is displayed.
36
Gracenote Settings
Auto: Automatically downloads disc
information when disc playback
stops. Connect to the network for
downloading.
Manual: Downloads the disc
information when [Video Search] or
[Music Search] is selected.
System Information
Displays the player’s software version
information and the MAC address.
Software License Information
Displays the Software License
Information.
Network Settings
Internet Settings
Connect the player to the network
beforehand. For details, see “Step 2:
Preparing for Network Connection”
(page 18).
Wired Setup: Select this when you
connect to a broadband router using
a LAN cable.
Wireless Setup(built-in): Select this
when you use the wireless LAN that
is built into the player for wireless
network connection.
View Network Status: Displays the
current network status.
z
For further details, visit the following website
and check the FAQ contents:
http://www.sony.com/bluraysupport/
Registered Media Remote Devices
Displays a list of your registered “Media
Remote” devices.
Remote Start
On: Permits turning on the system from
the “Media Remote” device.
Off: Turns off the function.
Network Connection Diagnostics
You can run the network diagnostic to
check if the network connection has
been made properly.
Easy Setup
Connection Server Settings
Renderer Options
Auto Access Permission: Sets whether
or not to allow automatic access
from a newly detected DLNA
controller-compatible product.
Renderer Name: Displays the player’s
name as it is listed on other DLNA
products on the network.
Renderer Access Control
Displays a list of DLNA controllercompatible products and sets whether or
not each product is accessible via this
player.
PARTY Auto Start
On: Starts a PARTY or joins an existing
PARTY at the request of a
networked product compatible with
the PARTY STREAMING function.
Off: Turns off the function.
Easy Initial Settings
Runs [Easy Initial Settings] to make the
basic settings. Follow the on-screen
instructions.
Easy Network Settings
Runs [Easy Network Settings] to make
the basic network settings. Follow the
on-screen instructions.
Settings and Adjustments
Sets whether or not to display the
connected server.
Resetting
Reset to Factory Default Settings
You can reset the player settings to the
factory default by selecting the group of
settings. All the settings within the group
will be reset.
Initialize Personal Information
You can erase your personal information
stored in the player.
Media Remote Device Registration
Registers your “Media Remote” device.
37
Additional Information
Troubleshooting
If you experience any of the following
difficulties while using the player, use
this troubleshooting guide to help
remedy the problem before requesting
repairs. Should any problem persist,
consult your nearest Sony dealer.
Picture
There is no picture or the picture is
not output correctly.
, Check that all the connecting cables
are securely connected (page 15).
, Switch the input selector on your TV
to display the signal from the player.
, Reset the video output resolution to the
lowest resolution by pressing x on the
player for more than 10 seconds.
, For HDMI connections, try the
following: 1Turn the player off and
on again. 2Turn the connected
equipment off and on again.
3Disconnect and then reconnect the
HDMI cable.
, The HDMI OUT jack is connected to a
DVI device that does not support
copyright protection technology.
, For HDMI connections, check the
[Output Video Format] settings in the
[Screen Settings] setup (page 32).
, When the analog signals are also
output, set [BD-ROM 24p Output] or
[DVD-ROM 24p Output] to [Off] in
the [Screen Settings] setup (page 32).
, For BD-ROMs, check the [BD-ROM
24p Output] setting in the [Screen
Settings] setup (page 32).
38
The display language on the screen
switches automatically when
connected to the HDMI OUT jack.
, When [Control for HDMI] is set to
[On] (page 35), the display language
on the screen automatically switches
according to the language setting of the
connected TV (if you change the
setting on your TV, etc.).
Sound
There is no sound or the sound is not
output correctly.
, Check that all the connecting cables
are securely connected (page 15).
, Switch the input selector on your AV
amplifier (receiver) so that the audio
signals of the player are output from
your AV amplifier (receiver).
, If the audio signal does not come
through the DIGITAL OUT
(OPTICAL/COAXIAL)/HDMI OUT
jack, check the audio settings
(page 33).
, For HDMI connections, try the
following: 1Turn the player off and
on again. 2Turn the connected
equipment off and on again.
3Disconnect and then reconnect the
HDMI cable.
, For HDMI connections, if the player is
connected to a TV through an AV
amplifier (receiver), try connecting the
HDMI cable directly to the TV. Refer
also to the instruction manual supplied
with the AV amplifier (receiver).
, There is no sound if you connect an
AV amplifier to the HDMI OUT 1
jack, and set [AV Separation Output
Mode] to [On] (page 36). Set [AV
Separation Output Mode] to [Off], or
connect the AV amplifier to the HDMI
OUT 2 jack (See “About AV
Separation Mode” (page 17).).
, The HDMI OUT jack is connected to a
DVI device. (DVI jacks do not accept
audio signals.)
, The device connected to the HDMI
OUT jack does not support the audio
format of the player. Check the audio
settings (page 33).
The HD Audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High
Resolution Audio, and DTS-HD
Master Audio) is not output by
bitstream.
The interactive audio is not output.
, Set [BD Audio MIX Setting] to [On] in
the [Audio Settings] setup (page 33).
Disc
The disc does not play.
, The disc is dirty or skewed.
, The disc is upside down. Insert the disc
with the playback side facing down.
, The disc has a format that cannot be
played back by this player (page 43).
, The player cannot play a recorded disc
that has not been correctly finalized.
, The region code on the BD or DVD
does not match the player.
The player does not detect a USB
device connected to the player.
, Make sure that the USB device is
securely connected to the USB jack.
, Check if the USB device or a cable is
damaged.
, Check if the USB device is on.
, If the USB device is connected via a
USB hub, connect the USB device
directly to the player.
SEN (Sony Entertainment
Network)
The picture/sound is poor/certain
programs display a loss of detail,
especially during fast-motion or dark
scenes.
, Picture/sound quality may be poor
depending on Internet content
providers.
, Picture/sound quality may be
improved by changing the connection
speed. We recommend a connection
speed of at least 2.5 Mbps for standard
definition video (10 Mbps for high
definition video).
, Not all videos will contain sound.
Additional Information
, Set [BD Audio MIX Setting] to [Off]
in the [Audio Settings] setup
(page 33).
, Check that the connected AV amplifier
(receiver) is compatible with each HD
Audio format.
USB device
The picture is small.
, Press M to zoom in.
39
Skype
interrupt the communication. Move
the player away from such devices, or
turn off such devices.
There is severe humming or noise.
, Set the volume of the connected TV
lower.
, Try moving the web camera with
microphone away from the speakers of
the connected TV.
Network connection
The player cannot connect to the
network.
, Check the network connection
(page 18) and the network settings
(page 36).
You cannot connect your PC to the
Internet after [Wi-Fi Protected Setup
(WPS)] is performed.
, The wireless settings of the router may
change automatically if you use the
Wi-Fi Protected Setup function before
adjusting the settings of the router. In
this case, change the wireless settings
of your PC accordingly.
You cannot connect the player to the
wireless LAN router.
, Check if the wireless LAN router is on.
, Depending on the surrounding
environment, such as the wall material,
radio wave receiving condition, or
obstacles between the player and the
wireless LAN router, the
communication distance may be
shortened. Move the player and the
wireless LAN router closer to each
other.
, Devices that use a 2.4 GHz frequency
band, such as a microwave, Bluetooth,
or digital cordless device, may
40
The desired wireless router is not
shown in the wireless network list.
, Press RETURN to return to the
previous screen, and try [Wireless
Setup(built-in)] again. If the desired
wireless router is still not detected,
select [Manual registration].
The message [A new software version
is available. Please go to the "Setup"
section of the menu and select
"Network update" to perform the
update.] appears on the screen when
turning the player on.
, See “Network Update” (page 31) to
update the player to a newer software
version.
You cannot start the PARTY
STREAMING function.
, Check that [PARTY Auto Start] is set
to [On] in [Network Settings]
(page 37).
“Control for HDMI” (BRAVIA
Sync)
The [Control for HDMI] function does
not work (BRAVIA Sync).
, Check that your TV is connected via
the HDMI OUT 1 jack. If your TV is
connected via the HDMI OUT 2 jack,
BRAVIA Sync is disabled.
, Check that [Control for HDMI] is set
to [On] (page 35).
, If you change the HDMI connection,
turn the player off and on again.
The System Power-Off function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] and
[HDMI: Linked to TV-off] are set to
[On] (page 35).
Others
Playback does not start from the
beginning of content.
, Press OPTIONS, and select [Play from
beginning].
Playback does not start from the
resume point where you last stopped
playing.
, The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
The disc tray does not open and
“LOCK” or “D ON” appears on the
front panel display.
, When “LOCK” appears, the player is
locked. To cancel the Child Lock, hold
down N on the player until
“UNLOCK” appears on the front panel
display (page 10).
, When “D ON” appears, contact your
Sony dealer or local authorized Sony
service facility.
Additional Information
, If power failure occurs, set [Control
for HDMI] to [Off], then set [Control
for HDMI] to [On] (page 35).
, Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control for
HDMI] function.
– the connected component’s setting
for the [Control for HDMI] function
is correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for
HDMI] function, you may be unable
to control the TV from the player.
– if you change the HDMI
connection, disconnect and
reconnect the AC power cord, or a
power failure occurs, try the
following: 1Switch the input
selector of the AV amplifier
(receiver) so that the picture from
the player appears on the TV screen.
2Set [Control for HDMI] to [Off],
then set [Control for HDMI] to [On]
(page 35). Refer to the instruction
manual supplied with the AV
amplifier (receiver).
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, Try the following: 1Press down Z
and N on the player for more than 10
seconds, until the tray opens.
2Remove the disc. 3When “OPEN”
appears on the front panel display,
press down [/1 on the player for more
than 10 seconds, until the player turns
off.
41
“Exxxx” or “TEMP” appears on the
front panel display.
, When “Exxxx” appears, contact your
nearest Sony dealer or local authorized
Sony service facility and give the error
code.
, When “TEMP” appears, try the
following: 1Check that the
ventilation holes on the rear of the
player are not blocked. 2Place the
player in a location with adequate
ventilation to prevent heat build-up in
the player.
The player does not respond to any
button.
, Moisture has condensed inside the
player (page 4).
, Hold down [/1 on the player for more
than 10 seconds until the indicators on
the front panel display turn off.
If the player still does not respond to
any button, disconnect then reconnect
the AC power cord.
Specifications
System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load
impedance)
LINE OUT R-AUDIO-L:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL):
Optical output jack/–18 dBm
(wave length 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
LINE OUT VIDEO:
Phono jack/1.0 Vp-p/75 ohms
LAN (100):
100BASE-TX Terminal
CONTROL S IN / IR IN:
Mini jack
USB:
USB jack Type A (For connecting a
USB memory, memory card reader,
digital still camera, and digital video
camera)
Wireless
Wireless LAN standard:
IEEE802.11b/g/n
Frequency range:
2.4 GHz band: Channels 1-11
Modulation:
DS-SS Modem and OFDM Modem
General
Power requirements:
120 V AC, 60 Hz
Power consumption:
21 W
42
Dimensions (approx.):
430 mm × 193 mm × 42 mm
(17 in. × 7 5/8 in. × 1 11/16 in.)
(width/depth/height) incl. projecting
parts
Mass (approx.):
1.9 kg (3 lb 3 oz)
Operating temperature:
5 ºC to 35 ºC (41 °F to 95 °F)
Operating humidity:
25 % to 80 %
Supplied accessories
Audio/video cable (phono plug ×3) (1)
Remote commander (remote) (1)
Size AA (R6) batteries (2)
Specifications and design are subject to
change without notice.
information, refer to the instruction manual
supplied with the recording device.
Discs that cannot be played
•
•
•
•
•
•
•
•
•
•
BDs with cartridge
BDXLs
DVD-RAMs
HD DVDs
DVD Audio discs
PHOTO CDs
Data part of CD-Extras
Super VCDs
Audio material side on DualDiscs
A disc recorded in a color system other
than NTSC, such as PAL (this player
conforms to the NTSC color system).
Note on Discs
BD-ROM
BD-R*2/BD-RE*2
DVD*3
DVD-ROM
DVD-R/DVD-RW
DVD+R/DVD+RW
CD*3
CD-DA (Music CD)
CD-ROM
CD-R/CD-RW
Super Audio CD
*1
Blu-ray
Disc*1
Since the Blu-ray Disc specifications are
new and evolving, some discs may not be
playable depending on the disc type and the
version.
The audio output differs depending on the
source, connected output jack, and selected
audio settings.
*2 BD-RE: Ver.2.1
BD-R: Ver.1.1, 1.2, 1.3 including organic
pigment type BD-R (LTH type)
The BD-Rs recorded on a PC cannot be
played if postscripts are recordable.
*3 A CD or DVD disc will not play if it has not
been correctly finalized. For more
This product is designed to playback
discs that conform to the Compact Disc
(CD) standard. DualDiscs and some of
the music discs encoded with copyright
protection technologies do not conform
to the Compact Disc (CD) standard,
therefore, these discs may not be
playable by this product.
Additional Information
Playable discs
Note on playback operations of BDs/
DVDs
Some playback operations of BDs/
DVDs may be intentionally set by
software producers. Since this player
plays BDs/DVDs according to the disc
contents the software producers
designed, some playback features may
not be available.
Note about double-layer BDs/DVDs
The playback pictures and sound may be
momentarily interrupted when the layers
switch.
43
Region code (BD-ROM/DVD VIDEO
only)
Your player has a region code printed on
the rear of the unit and will only play
BD-ROMs/DVD VIDEOs labeled with
identical region codes or ALL .
Region code
Playable types of files
Video
File format
Extensions
MPEG-1 Video/
PS*1*2
MPEG-2 Video/PS,
TS*1*3
“.mpg,”
“.mpeg,”
“.m2ts,” “.mts”
MPEG-4 AVC*1*2
“.mkv,” “.mp4,”
“.m4v,” “.m2ts,”
“.mts”
WMV9*1*2
“.wmv,” “.asf”
AVCHD*2*4
*5
Xvid
“.avi”
Music
File format
Extensions
MP3 (MPEG-1 Audio “.mp3”
Layer III)
AAC/HE-AAC*1*2*6
“.m4a”
WMA9
Standard*1*2*6
“.wma”
LPCM
“.wav”
Photo
File format
Extensions
JPEG
“.jpg,” “.jpeg”
PNG
“.png*7”
GIF
“.gif*7”
MPO
“.mpo*8”
*1
The player does not play coded files such as
DRM.
The player does not play this file format on
a DLNA server.
*3 The player can only play standard
definition video on a DLNA server.
*4 The player can play AVCHD Ver. 2.0
(AVCHD 3D/Progressive) format files.
*2
44
*5
The player plays AVCHD format files that
are recorded on a digital video camera, etc.
The AVCHD format disc will not play if it
has not been correctly finalized.
*6 The player does not play coded files such as
Lossless.
*7 The player does not play animated PNG or
animated GIF files.
*8 For MPO files other than 3D, the key image
or the first image is displayed.
b
Since communication via the wireless
LAN function is established by radio
waves, the wireless signal may be
susceptible to interception. To protect
wireless communication, this player
supports various security functions. Be
sure to correctly configure the security
settings in accordance with your network
environment.
No Security
Although you can easily make settings,
anyone can intercept wireless
communication or intrude into your
wireless network, even without any
sophisticated tools. Keep in mind that
there is a risk of unauthorized access or
interception of data.
WEP
WEP applies security to
communications to prevent outsiders
from intercepting communications or
intruding into your wireless network.
WEP is a legacy security technology that
enables older devices, which do not
support TKIP/AES, to be connected.
Additional Information
• Some files may not play depending on the
file format, file encoding, recording
condition, or DLNA server condition.
• Some files recorded or edited on a PC may
not play.
• The player can recognize the following files
or folders in BDs, DVDs, CDs and USB
devices:
– up to folders in the 9th layer, including the
root folder
– up to 500 files/folders in a single layer
• The player can recognize the following files
or folders stored in the DLNA server:
– up to folders in the 19th layer
– up to 999 files/folders in a single layer
• Some USB devices may not work with this
player.
• The player can recognize Mass Storage
Class (MSC) devices (such as flash memory
or an HDD), Still Image Capture Device
(SICD) class devices and 101 keyboard
(front USB jack only).
• To avoid data corruption or damage to the
USB memory or devices, turn the player off
when connecting or removing the USB
memory or devices.
• The player may not play high bit rate video
files on DATA CDs smoothly. You are
recommended to play such files using a
DATA DVD or DATA BD.
About wireless LAN security
WPA-PSK (TKIP), WPA2-PSK (TKIP)
TKIP is a security technology developed
to correct for the deficiencies of WEP.
TKIP assures a higher security level than
WEP.
WPA-PSK (AES), WPA2-PSK (AES)
AES is a security technology that uses an
advanced security method that is distinct
from WEP and TKIP.
AES assures a higher security level than
WEP or TKIP.
45
Notes About the Discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
Dust, fingerprints, or scratches on the disc
may cause it to malfunction.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it
in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe
the disc from the center out.
• Do not use solvents such as benzine, thinner,
commercially available disc/lens cleaners,
or anti-static spray intended for vinyl LPs.
• If you have printed the disc’s label, dry the
label before playing.
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-standard shape (e.g.,
card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker
adhesive on it.
• Do not resurface the playing side of a disc to
remove surface scratches.
46
Code numbers of
controllable TVs
While holding down -TV- [/1, enter the
TV manufacturer’s code using the
number buttons.
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
Manufacturer
Code number
Sony
01 (default)
Hitachi
02
LG/Goldstar
04
Mitsubishi/MGA
13
NEC
04
Panasonic
19
Philips
21
Pioneer
16
RCA
10
Samsung
20
Sharp
18
Toshiba
07
Language code list
For details, see “BD/DVD Viewing
Settings” (page 34).
The language spellings conform to the
ISO 639: 1988 (E/F) standard.
Code Language
Malay
1358
1363
1369
1379
1403
1417
Burmese
Nepali
Norwegian
Oromo
Punjabi;
Panjabi
Pashto;
Pushto
Quechua
1365
1376
1393
1408
1428
Malese;
Maltese
Nauru
Dutch
Occitan
Oriya
Polish
1436
Portuguese
1481
Kirundi; Rundi
Russian
Sanskrit
Sangho;
Sango
Singhalese;
Sinhalese
Slovenian
Shona
Albanian
Siswati; Swati
1483
1491
1498
1502
RhaetoRomance
Romanian
Kinyarwanda
Sindhi
SerboCroatian
Slovak
Sundanese
Swahili
Telugu
Thai
Turkmen
Setswana;
Tswana
Turkish
Tatar
Ukrainian
Uzbek
Volapük
Xhosa
Chinese
not specified
1516
1521
1527
1529
1532
1535
Code Language
1027
1032
1044
1051
1053
1059
1061
1067
1079
1097
1105
1130
1144
1149
1151
1165
1171
1181
1186
1196
1209
1226
1233
1239
1248
1254
1261
1283
1297
1299
1301
1307
1313
1327
1334
1347
1350
1353
Afar
Afrikaans
Arabic
Aymara
Bashkir
Bulgarian
Bislama
Tibetan
Catalan
Czech
Danish
Bhutani;
Dzongkha
English
Spanish
Basque
Finnish
Faroese
Frisian
Scots Gaelic
Guarani
Hausa
Croatian
Armenian
Interlingue
Indonesian
Italian
Japanese
Javanese
Kazakh
Cambodian;
Khmer
Korean
Kurdish
Latin
Laothian; Lao
Latvian
Maori
Malayalam
Moldavian
1028
1039
1045
1052
1057
1060
1066
1070
1093
1103
1109
1142
Abkhazian
Amharic
Assamese
Azerbaijani
Byelorussian
Bihari
Bengali
Breton
Corsican
Welsh
German
Greek
1145
1150
1157
1166
1174
1183
1194
1203
1217
1229
1235
1245
1253
1257
1269
1287
1298
1300
Esperanto
Estonian
Persian
Fiji
French
Irish
Galician
Gujarati
Hindi
Hungarian
Interlingua
Inupiak
Icelandic
Hebrew
Yiddish
Georgian
Greenlandic;
Kalaallisut
Kannada
1305
1311
1326
1332
1345
1349
1352
1356
Kashmiri
Kirghiz
Lingala
Lithuanian
Malagasy
Macedonian
Mongolian
Marathi
1435
1463
1482
1489
1495
1501
1503
1506
1508
1511
1513
1515
1517
1525
1528
1531
1534
1538
1540
1557
1572
1587
1632
1684
1703
1505
1507
1509
1512
1514
1539
1543
1564
1581
1613
1665
1697
Samoan
Somali
Serbian
Sesotho;
Sotho
southern
Swedish
Tamil
Tajik
Tigrinya
Tagalog
Tonga; Tonga
islands
Tsonga
Twi
Urdu
Vietnamese
Wolof
Yoruba
Zulu
Additional Information
1357
47
Parental control/area code
For details, see “Parental Control Area
Code” (page 35).
Code Area
2044
2046
2070
2092
2115
2174
2200
2248
2239
2276
2333
2362
2390
2427
2428
2489
2149
2086
2528
48
Argentina
Austria
Brazil
China
Denmark
France
Greece
India
Ireland
Japan
Luxembourg
Mexico
New Zealand
Pakistan
Poland
Russia
Spain
Switzerland
Thailand
2047
2057
2090
2093
2165
2109
2219
2238
2254
2304
2363
2376
2379
2424
2436
2501
2499
2543
2184
Australia
Belgium
Chile
Colombia
Finland
Germany
Hong Kong
Indonesia
Italy
Korea
Malaysia
Netherlands
Norway
Philippines
Portugal
Singapore
Sweden
Taiwan
United
Kingdom
Index
Numerics
3D 12, 20
3D Output Setting 32
4K Output 33
A
AUDIO 12
Audio Settings 33
B
BD/DVD Viewing
Settings 34
BD-LIVE 20
BD-R 43
BD-RE 43
Bitstream 39
Blu-ray Disc 43
BONUSVIEW 20
BRAVIA Sync 40
C
CD 43
Child Lock 10, 41
Color buttons 13
Connecting
AV amplifier
(Receiver) 16
Network 18
TV 15
Control for HDMI 35,
40
D
Deep Color 33
Dimmer 35
Display 12
DLNA 22, 23, 37
Dolby Digital 34
DSD Output Mode 33
DTS 34
DVD 43
E
Play information 21
Playable discs 43
POP UP/MENU 13
Q
Quick Start Mode 36
Easy Setup 19, 37
G
Gracenote 24
Gracenote Settings 36
H
HDMI 32, 33
HOME 13, 31
Home menu 31
I
Internet Browser 27
Internet content 22
IP Content NR Pro 25
M
MAC address 36
Music Settings 35
N
Network Settings 36
Network Update 31
O
OPTIONS 13
OSD Language 35
P
Parental Control 35
Parental Control
Settings 35
PARTY STREAMING
23
R
Region code 44
Remote 12
Resetting 37
Resetting the player 37
Resume 13, 41
S
Screen Settings 32
SEN 13, 22
Setup 31
Skype 28
Software update 31, 36
SUBTITLE 12
System Settings 35
T
TOP MENU 13
Troubleshooting 38
TV Screen Size Setting
for 3D 32
TV Type 32
U
Update 31
USB 21
W
WEP 45
WPA2-PSK (AES) 45
WPA2-PSK (TKIP) 45
WPA-PSK (AES) 45
WPA-PSK (TKIP) 45
49
The software of this player may be updated in the future. For information about any
available updates and the latest Operating Instructions, please visit the following
website:
http://www.sony.com/bluraysupport/
4-418-506-12(1)
© 2012 Sony Corporation
Printed in Malaysia
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising