Sony KDL-40NX720 Operating instructions

Add to my manuals
40 Pages

advertisement

Sony KDL-40NX720 Operating instructions | Manualzz

4-270-412-

15

(1)

LCD

Digital Colour TV

Operating Instructions

Getting Started

Using Your BRAVIA TV

Network Setup

Additional Information

KDL-65HX92x / 60NX72x / 55HX92x / 55HX82x / 55NX72x / 46HX92x / 46HX82x / 46NX72x

KDL-40NX72x

NOTICE FOR

CUSTOMERS IN

THE UNITED

KINGDOM

A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse.

Never use the plug without the fuse cover.

If you should lose the fuse cover, please contact your nearest Sony service station.

FUSE

FUSE

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse.

Please refer to the illustration that actually equipped with the product.

Introduction

Thank you for choosing this Sony product.

Before operating the TV, please read this manual thoroughly and retain it for future reference.

The manufacturer of this product is

Sony Corporation, 1-7-1 Konan

Minato-ku Tokyo, 108-0075 Japan.

The Authorized Representative for

EMC and product safety is Sony

Deutschland GmbH, Hedelfinger

Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Notes on Digital TV function

• Any functions related to Digital TV

( ) will only work in countries or areas where DVB-T (MPEG-2 and

H.264/MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG-

2 and H.264/MPEG-4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV.

• Your cable provider may charge a fee for their services, or require you to agree to its terms and conditions of business.

• This TV set complies with DVB-T and

DVB-C specifications, but compatibility with future DVB-T digital terrestrial and

DVB-C digital cable broadcasts are not guaranteed.

• Some Digital TV functions may not be available in some countries/areas and

DVB-C cable may not operate correctly with some providers.

~

• The “x” that appears in the model name corresponds to a numeric digit, related to design, colour or TV system.

• Instructions about “Installing Wall

Mount Bracket” are included within this

TV’s instructions manual.

The illustrations used in this manual may differ depending on your TV model.

The illustrations of the remote used in this manual are of the RM-ED044 unless otherwise stated.

• Before operating the TV, please read

“Safety Information” (page 35). Retain

this manual for future reference.

Trademark information

is a registered trademark of the DVB

Project.

HDMI, the HDMI Logo, and High-

Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

DLNA®, the DLNA Logo and DLNA

CERTIFIED® are trademarks, service marks, or certification marks of the Digital

Living Network Alliance.

DivX® is a video file compression technology, developed by DivX, Inc.

DivX®, DivX Certified®, and associated logos are trademarks of DivX, Inc. and are used under license.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc.

This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into

DivX video.

ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certified® device must be registered in order to play DivX Video-on-

Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

“BRAVIA” and are trademarks of Sony Corporation.

TrackID is a trademark or registered trademark of Sony Ericsson Mobile

Communications AB.

Music and video recognition technology and related data are provided by

Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com.

CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000-present Gracenote.

Gracenote Software, copyright © 2000present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a nonexhaustive list of applicable

Gracenote patents. Gracenote, CDDB,

MusicID, MediaVOCS, the Gracenote logo and logotype, and the “Powered by

Gracenote” logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries.

“FACE DETECTION” logo is trademark of Sony Corporation.

Opera® Browser from Opera Software

ASA. Copyright 1995-2010 Opera

Software ASA. All rights reserved.

2

GB

Notice for Wireless

Signal

1. Hereby, Sony, declares that this unit is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

To obtain the declaration of conformity

(DoC) for R&TTE Directive, please access the following URL address.

http://www.compliance.sony.de/

2. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives.

TV wireless system may be operated in following countries:

Austria, Belgium, Bulgaria, Cyprus, Czech

Republic, Denmark, Estonia, Finland,

France, Germany, Greece, Hungary,

Iceland, Ireland, Italy, Latvia,

Liechtenstein, Lithuania, Luxembourg,

Malta, The Netherlands, Norway, Poland,

Portugal, Slovak Republic, Romania,

Slovenia, Spain, Sweden, Switzerland,

Turkey, and The United Kingdom.

This equipment can be operated in other non-European countries.

TV Wireless System -

Regulation Information

For Customers in Italy

s with respect to private use, by the

Legislative Decree of 1.8.2003, no. 259 (“Code of Electronic

Communications”). In particular

Article 104 indicates when the prior obtainment of a general authorization is required and Art. 105 indicates when free use is permitted; s with respect to the supply to the public of the RLAN access to telecom networks and services (e.g. TV wireless system), by the Ministerial

Decree 28.5.2003, as amended, and

Art. 25 (general authorization for electronic communications networks and services) of the Code of electronic communications

For Customers in Norway

Use of this radio equipment is not allowed in the geographical area within a radius of

20 km from the centre of Ny-Ålesund,

Svalbard.

For Customers in Cyprus

The end user must register the RLAN (or

WAS or WiFi) devices in the Department of Electronic Communications (P.I. 365/

2008 and P.I. 267/2007).

P.I. 365/2008 is the Radiocommunications

(Categories of Stations Subject to General

Authorization and Registration) Order of

2008.

P.I. 267/2007 is the General Authorization for the use of Radiofrequencies by Radio

Local area Networks and by Wireless

Access Systems, including Radio Local

Area Networks (WAS/RLAN).

For Customers in France

The WLAN (WiFi) feature of this LCD

Digital Colour TV shall exclusively be used inside buildings. Any use of the

WLAN (WiFi) feature of this LCD Digital

Colour TV outside of the buildings is prohibited on the French territory. Please make sure that the WLAN (WiFi) feature of this LCD Digital Colour TV is disabled before any use outside of the buildings.

(ART Decision 2002-1009 as amended by

ART Decision 03-908, relating to radiofrequencies use restrictions).

Location of the identification label

Labels for Model No., Production Date

(month/year) and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the

TV or package.

Precautions

Viewing the TV

• Some people may experience discomfort

(such as eye strain, fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The length and frequency of necessary breaks will vary from person to person.

You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images or playing stereoscopic 3D games until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual of any other device or media used with this television and (ii) our website (http:// www.sony-europe.com/myproduct) for the latest information. The vision of young children (especially those under six years old) is still under development.

Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images or play stereoscopic 3D games. Adults should supervise young children to ensure they follow the recommendations listed above.

Do not use, store, or leave the 3D

Glasses or the battery near fire, or in places with a high temperature, e.g., in direct sunlight, or in sun-heated cars.

• When using the simulated 3D function, please note that the displayed image is modified from the original due to the conversion done by this television.

View the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes.

• When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light

(red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction.

• Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged.

• If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises.

• Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in use. This is not a malfunction.

(Continued)

3

GB

• The LCD screen contains a small amount of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury (except for LED backlight LCD TV). Follow your local ordinances and regulations for disposal.

• Do not subject the LCD screen to any strong impact or shock. The screen glass may crack or shatter and cause injury.

Handling and cleaning the screen surface/cabinet of the TV set

Be sure to unplug the mains lead connected to the TV set from mains socket before cleaning.

To avoid material degradation or screen coating degradation, observe the following precautions.

• To remove dust from the screen surface/ cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution.

Never spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the

TV set.

• Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material.

• Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.

• When adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand.

Optional Equipment

• Keep optional components or any equipment emitting electromagnetic radiation away from the TV set.

Otherwise picture distortion and/or noisy sound may occur.

• This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection signal cable shorter than 3 meters.

(Caution about handling the remote control)

Notes

• Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix old and new batteries.

• Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority.

• Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.

Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

Wireless Function of the unit

• Do not operate this unit near medical equipment (pacemaker, etc.), as malfunction of the medical equipment may result.

Although this unit transmits/receives scrambled signals, be careful of unauthorised interception. We cannot be responsible for any trouble as a result.

Disposal of the TV set

Disposal of Old

Electrical &

Electronic

Equipment

(Applicable in the European

Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local

Civic Office, your household waste disposal service or the shop where you purchased the product.

Disposal of waste batteries

(applicable in the

European Union and other

European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

4

GB

5

GB

Table of Contents

Getting Started

Checking the accessories ........................................................................................................ 8

Inserting batteries into the remote............................................................................................ 8

1: Attaching the Table-Top Stand (except KDL-65HX92x) ...................................................... 8

2: Adjusting the viewing angle of the TV ................................................................................ 10

3: Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder) ...................... 11

4: Connecting audio/video devices ........................................................................................ 12

5: Preventing the TV from toppling over................................................................................. 13

6: Bundling the cables............................................................................................................ 14

7: Performing the initial set-up ............................................................................................... 14

Using Your BRAVIA TV

Watching the TV..................................................................................................................... 16

Selecting various functions and settings (Home Menu) ......................................................... 18

Displaying Operating Instructions (i-Manual) ......................................................................... 20

Network Setup

Preparing a wired network ..................................................................................................... 22

Preparing a wireless LAN....................................................................................................... 22

Setting up the Internet connection ......................................................................................... 23

If you cannot connect to the Internet...................................................................................... 24

Adjusting the server display settings...................................................................................... 24

Additional Information

Troubleshooting ..................................................................................................................... 26

Specifications ......................................................................................................................... 27

Installing the Accessories (Wall-Mount/Wall Hanging Bracket) ............................................. 30

Safety Information .................................................................................................................. 35

6

GB

After setting up your BRAVIA TV and learning basic operations with this manual, see the built-in manual (i-Manual) for further explanation of the features of your TV.

This TV has a built-in manual (i-Manual).

To access the i-Manual, press

i-MANUAL

on the remote, and select an item. For details, see

page 20 of this manual. Contents of the i-Manual may differ depending on the model/region/area.

Contents of the i-Manual

How to Use i-Manual

“BRAVIA” TV Features

3D Feature

Intelligent Presence Sensor

“BRAVIA” Internet Video

Internet Widgets

Wireless LAN

“BRAVIA” Sync with “Control for HDMI”

Skype Ready

TrackID™/Music Search/Video Search

USB HDD Recording

Watching TV

3D Feature

Digital Electronic Programme Guide

Favourites

Screen Format

Picture Mode

Text

Photos/Music/Videos

Twin Picture (PIP)

Twin Picture (P&P)

NVOD/MF

Settings/Home Menu

About the Home Menu

Settings

Display

Sound

System Settings i-Manual

Digital Set-up

Analogue Set-up

External Inputs

Network

Product Support

Using Other Equipment/

Internet

VCR/DVD Player

Audio System

USB Device (e.g. Digital Camera)

Picture Frame

HDMI Equipment

Internet/Wireless LAN

Home Network

Media Remote

PC

Parts Description

Remote

TV Controls and Indicators

Terminals

Troubleshooting

Index

Bookmarks

7

GB

Getting Started

Checking the accessories

Remote (1)

Size AAA batteries (R03 type) (2)

Table-Top Stand (1)

*

1

(except KDL-65HX92x)

Fixing screws for Table-Top Stand

(M5 x 16) (3)

(except KDL-65HX92x, KDL-60NX72x)

Assembling screws for Table-Top

Stand (M6 x 14) (4)

(KDL-60/55/46NX72x, KDL-55/46HX92x,

KDL-55/46HX82x only)

Assembling screws for Table-Top

Stand (M6 x 14) (3)

(KDL-40NX72x only)

Hexagon wrench (1)

(except KDL-65HX92x)

AV/Component Adapter (1)

(except KDL-65HX92x)

SCART Adapter (1)

(except KDL-65HX92x)

Camera and Microphone Unit (1)

(KDL-65/55/46HX92x only)

3D Glasses (battery included) (2)

(KDL-65/55/46HX92x only)

Pouch for 3D Glasses (2)

(KDL-65/55/46HX92x only)

Operating Instructions (this manual) and other documents

*

1

Refer to the supplied Table-Top Stand leaflet to assemble the Table-Top Stand.

Inserting batteries into the remote

1

2

Remove the protection sheet.

Push and slide the cover upward.

1: Attaching the Table-Top

Stand (except

KDL-65HX92x)

For KDL-55/46HX92x, KDL-55/46HX82x,

KDL-55/46/40NX72x

1

Refer to the supplied Table-Top Stand leaflet for proper attachment for some

TV models.

2

Place the TV set on the Table-Top

Stand.

Guide pins

~

Align the TV from the top, slide it in until the guide pins cannot be seen.

8

GB

3

Fix the TV to the Table-Top Stand according to the arrow marks that guide the screw holes using the supplied screws.

2

Attach the TV and Table-Top Stand with the supplied screw and hexagon wrench.

*

Head

~

If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.

For KDL-60NX72x

1

Align with the two dowels of the Table-

Top Stand, and gently place the TV, checking the f mark is facing the front.

* 3 N•m {30 kgf•cm}

~

• Set the torque setting to approximately 3 N·m

{30 kgf·cm}.

Detaching the Table-Top Stand from the TV

To detach the Table-Top Stand from the TV, remove the screws fixed in step 3. For

KDL-60NX72x, be sure to remove the screws

for detaching the head when the Table-Top

Stand is not attached to the TV.

For KDL-65HX92x, be sure to remove the screws at the head of the Table-Top Stand.

~

• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.

When removing the Table-Top Stand from the

TV, lay the display face down on a stable work surface that is larger than the TV.

• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

Be sure the TV is on the vertical position before switching on. TV set must not powered on with

LCD panel face down to avoid uneven picture uniformity.

(Continued)

9

GB

B

For KDL-65HX92x

Soft cloth

B

For KDL-60/55/46/40NX72x,

KDL-55/46HX92x, KDL-55/46HX82x

Head

Head

2: Adjusting the viewing angle of the TV

This TV can be adjusted within the angles as illustrated.

Angle adjustment (Swivel)

(except KDL-65HX92x,

KDL-60NX72x)

~

When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over.

20°

20°

20°

20°

Angle adjustment (Tilt)

(except KDL-65HX92x,

KDL-60NX72x)

0° - 6°

Soft cloth

~

• Ensure that there are no objects in front of the TV.

IR Sensor

3D Sync Transmitter

Intelligent Presence Sensor

• Do not expose the Intelligent Presence Sensor to direct sunlight or other strong light, as malfunction may occur.

10

GB

3: Connecting an antenna

(aerial)/Set Top Box/ recorder (e.g. DVD recorder)

~

• Use an antenna cable connector no greater than

14 mm in thickness.

• Use an HDMI cable connector within 12 mm

(thickness) x 21 mm (width).

Connecting a Set Top Box/recorder

(e.g. DVD recorder) with SCART

B

For KDL-65HX92x

B

For KDL-60/55/46/40NX72x,

KDL-55/46HX92x, KDL-55/46HX82x

SCART adapter

(supplied)

Set Top Box/recorder (e.g. DVD recorder)

~

Right Angle Type Universal SCART Lead is recommended for this connection.

Set Top Box/recorder (e.g. DVD recorder)

(Continued)

11

GB

Connecting a Set Top Box/recorder

(e.g. DVD recorder) with HDMI

B

For KDL-65HX92x

4: Connecting audio/video devices

B

For KDL-65HX92x

Set Top Box/recorder (e.g. DVD recorder)

B

For KDL-60/55/46/40NX72x,

KDL-55/46HX92x, KDL-55/46HX82x

Audio/video device

Set Top Box/recorder (e.g. DVD recorder)

12

GB

B

For KDL-60/55/46/40NX72x,

KDL-55/46HX92x, KDL-55/46HX82x

5: Preventing the TV from toppling over

AV/Component adapter (supplied)

Audio/video device

1

Install a wood screw (4 mm in diameter, not supplied) in the TV stand.

2

Install a machine screw (not supplied) into the screw hole of the TV.

For KDL-65HX92x

Use M6 screw

For KDL-60/55/46/40NX72x,

KDL-55/46HX92x, KDL-55/46HX82x

Use M4 screw

3

Tie the wood screw and the machine screw with a strong cord (not supplied).

The length of the M6/M4 machine screw differs depending on the cord diameter.

Please refer to below illustration.

5-6 mm

Screw M6/M4

Cord

TV’s Table-Top

Stand

13

GB

6: Bundling the cables

~

• Before bundling the cables, remove the cable holder from the AC cover (see step 1 and 2).

Reuse the cable holder (see step 3) to bundle the other cables (see step 4).

• Do not bundle the AC power cord (mains lead) together with other cables.

KDL-65HX92x

7: Performing the initial setup

1

3 4

KDL-60/55/46/40NX72x, KDL-55/46HX92x,

KDL-55/46HX82x

1

*

2

2

4

1

Connect the TV to your AC power outlet (mains socket).

2

Check the

ENERGY SAVING

switch setting is on ( z

).

3

Press

1

on the TV. The

=

(power) indicator will light up in green.

When you switch on the TV for the first time, the Language menu appears on the screen.

~

• When you turn on the TV for the first time, the

TV requires some internal processing for optimization before you can perform the initial setup. There will be no picture and sound, and the timer indicator on the front of the TV blinks orange for about 40 seconds. Do not turn off the TV during this process.

This process has been completed at the factory for some TVs.

4

*

When installing on the wall, attach the cable holder under the terminals.

Follow the instructions on the screen.

Digital Auto Tuning:

When you select

“Cable”, we recommend that you select

“Quick Scan” for quick tuning. Set

“Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using

“Quick Scan”, try “Full Scan” (though it may take some time).

14

GB

~

“Full Scan” may not be available depending on your region/country.

Programme Sorting:

Changes the order of analogue channels stored in the TV.

1

Press

F

/ f

to select the channel you want to move to a new position, then press .

2

Press

F

/ f

to select the new position for the channel, then press .

~

• You can also tune channels manually.

15

GB

Using Your BRAVIA TV

Watching the TV

1

Turn on the TV.

1 Switch

ENERGY SAVING

switch on ( z

).

2

Press 1 on the TV to turn on the TV.

2

Select a mode.

3

Select a TV channel.

2

GUIDE

3

To use Digital Electronic Programme Guide

Press

GUIDE

in digital mode to display the programme guide.

Use with

0-9

to select digital channels. For channel numbers 10 and above, press the next digit quickly.

z

• The number

5

, N ,

PROG +

and

AUDIO

buttons on the remote have a tactile dot. Use the tactile dots as a reference when operating the TV.

16

GB

Parts and controls of the remote

Use the supplied remote to control your TV. Basic remote operations are explained here. For details on all of the remote function, press

i-MANUAL

and see the built-in manual (i-Manual) (page 20).

1

:

/

1

Press to turn the TV on and off from standby mode.

2

i-MANUAL

Displays the built-in manual (i-Manual).

3

SYNC MENU

Displays the BRAVIA Sync Menu to operate the

BRAVIA Sync-compatible equipment that is connected to the TV.

4 F

/

f

/

G

/

g

/

Moves the on-screen cursor, and confirm the item.

5

OPTIONS

Displays a list of convenient functions and menu shortcuts. The menu items vary based on the current input and/or content.

6

Coloured buttons

When the coloured buttons are available, an operation guide appears on the screen.

7

PROG/CH +/–/Number buttons

Select channels in the TV mode.

8 2

+/–

Adjusts the volume.

Rear of Remote Control

17

GB

Selecting various functions and settings (Home Menu)

You can select all the features from the Home menu.

See page 19 for the Home menu map.

1

Press HOME .

2

Press

F

/

f

/

G

/

g

/ to select items.

2

1, 3

To select items in the Home menu (e.g., selecting “Settings”)

1

Press

G

/ g

to select “Settings”.

The contents of “Settings” are displayed on the right.

2

Press F / f to select “Display”.

3

Press to launch the menu.

According to the screen instruction, press

F / f / G / g to select items and press to confirm.

3

Press HOME to exit.

18

GB

Home menu map

After pressing

HOME

on the remote, following icons are displayed as categories. The categories are available depending on your TV model, region, country and broadcasting conditions.

TV

You can select a list of TV channels, or a programme guide.

Media

Inputs

Favourites/History

Settings

Widgets

Applications

Qriocity

Internet Content

Recommendations

Recordings

You can enjoy photo/music/video content via USB devices or the home network.

You can select equipment connected to the TV.

Provides quick access to your frequently used and recently viewed items, such as TV channels, external inputs or your media files.

Contains all of the necessary configurations to customise your TV settings.

Provides access to Widgets.

You can enjoy various applications such as “Music Search”,

“Internet Browser”, etc.

Enable access to the “Qriocity” online service.

You can enjoy Internet content services.

Presents recommendations for programmes you may like, based on your viewing history.

You can enjoy timer recordings to a connected USB HDD device, and selection of recorded content to play.

19

GB

Displaying Operating Instructions (i-Manual)

Operating instructions are built into your BRAVIA TV and can be displayed on the screen.

To learn more about your TV features, access your i-Manual with the touch of a button.

1

Press i-MANUAL.

1

2

Press

F

/

f

/

G

/

g

/ to select items.

2

To select items in the i-Manual

1

Press F / f to select an item.

The contents in the item are displayed on the right as the second layer.

2

Press g

to move to the second layer.

3

Press

F

/ f

to select an item from the second layer.

A digest of the item is displayed on the right.

If the third layer is available, repeat this step to display the digest of the item.

4

Press g to select an item.

The content is displayed.

20

GB

Description of the i-Manual screen

Press

G

to go back to the previous page

Press f

to go to the next page

Page number/Total page number

Press

RETURN

to go back to the previous page

Press to launch the function

~

This will be displayed only when the function is available.

To use the bookmark

The i-Manual has a bookmark function. Pages can be bookmarked with coloured buttons, according to the instructions at the bottom of the screen. To access your registered bookmarks, go to the top page of the i-Manual and select “Bookmarks”.

To memorise the last displayed page

i-Manual memorises the last displayed page. When in the i-Manual screen, press

i-MANUAL

to return to the TV screen. If you press

i-MANUAL

again, the information you saw last time appears.

For viewing from the top page of the i-Manual, return to the top page according to the instructions on the screen, or press

HOME

and select “i-Manual”of “Settings” in the Home menu.

~

• Last page memory is automatically reset when you switch the TV to standby mode.

21

GB

Network Setup

When you connect this TV to the Internet, you can enjoy multiple functions: displaying a photograph that shows its location on the map, enjoying Internet video, etc. For details on the functions, refer to the i-Manual.

~

• You will need to contract with an Internet service provider to connect to the Internet.

Except KDL-65HX92x

TV

Preparing a wired network

For KDL-65HX92x

Internet

Internet or

Modem with router functions

Router

Modem

Internet or

Modem with router functions

~

For LAN connections, use a Category 7 cable (not supplied).

TV

Router

Modem

Internet

Preparing a wireless LAN

The built-in wireless LAN device allows you to access the Internet and your home network.

With this feature, you can connect to a wireless

LAN and enjoy the benefits of networking in a cable-free environment. Before setting up the wireless LAN function of the TV, be sure to set up a wireless LAN router.

TV

Wireless router

Modem

Internet

22

GB

Setting up the Internet connection

Using the network feature you can connect the

TV to the Internet. The set-up procedure differs depending on the type of network and

LAN router. Before setting up the Internet connection, be sure to set up a LAN router.

Check your wireless LAN environment using the following chart.

Wireless LAN

Secure Wireless LAN?

NO k

Type 3

YES m

Do you use a wireless LAN router compatible with Wi-Fi

Protected Set-up (WPS)?

YES m

Type 1

*

NO k

Type 2

Wired LAN

,

Type 4

* Type 1 is easier to set up if your router has an automatic setting button, e.g. Air Station One-

Touch Secure System (AOSS). Most of the latest routers have this function. Check your router.

Type 1

: Follow the configuration for “Secured

Network with Wi-Fi Protected Set-up (WPS)”.

Type 2

: Follow the configuration for “Secured

Network without Wi-Fi Protected Set-up

(WPS)”.

Type 3

: Follow the configuration for

“Unsecured Network with Any Type of

Wireless LAN Router”.

Type 4

: Follow the configuration for “Wired network set-up”.

Type 1: Secured network with

Wi-Fi Protected Set-up (WPS)

The WPS standard makes security of a wireless home network as straightforward as pressing the WPS button on the wireless LAN router.

Before setting up a wireless LAN, check the location of the WPS button on the router and verify how to use it.

For security purpose, “WPS (PIN)” provides a

PIN code for your router. PIN code is renewed every time you select “WPS (PIN)”.

1

Press

HOME

, then select >

“Network” > “Network Set-up”.

2

Select “Wireless Set-up”.

3

Select “WPS (Push Button)” for Push

Button method or “WPS (PIN)” for

PIN method.

~

• Button name of the WPS may differ depending on the router (e.g. AOSS button).

4

Follow the instructions on the set-up screen.

Type 2: Secured network without Wi-Fi Protected Set-up

(WPS)

To set up a wireless LAN, SSID (wireless network name) and security key (WEP or

WPA key) will be required. If you do not know them, consult the instruction manual of your router.

1

Press

HOME

, then select >

“Network” > “Network Set-up”.

2

Select “Wireless Set-up”.

3

Select “Scan”, then select a network from the list of scanned wireless networks.

4

Follow the instructions on the set-up screen.

~

• If you use WPS for network set-up, the security settings of the wireless LAN router activate, and any equipment previously connected to the wireless LAN in a non-secure status will be disconnected from the network.

In this case, activate the security settings of the disconnected equipment and then reconnect. Or, you can deactivate the security settings of the wireless LAN router, and then connect the equipment to a TV in a non-secure status.

(Continued)

23

GB

Type 3: Unsecured network with any type of wireless LAN router

To set up a wireless LAN, SSID (wireless network name) will be required.

1

Press

HOME

, then select >

“Network” > “Network Set-up”.

2

Select “Wireless Set-up”.

3

Select “Scan”, then select a network from the list of scanned wireless networks.

4

Follow the instructions on the set-up screen.

~

Security key (WEP or WPA key) will not be required because you do not need to select any security method in this procedure.

Viewing the network status

You can confirm your network status.

1

Press

HOME

, then select >

“Network” > “Network Set-up”.

2

Select “View Network Status”.

If you cannot connect to the

Internet

Use the diagnosis to check possible causes for network connection failures, and settings.

1

Press

HOME

, then select >

“Network” > “Network Set-up”.

2

Select “View Network Status”.

3

Select “Check Connection”.

This may take several minutes. You cannot cancel the diagnosis after selecting “Check Connection”.

Type 4: Wired network set-up

Enter the respective alphanumeric values for your router if necessary. The items that need to be set (e.g. IP Address, Subnet Mask, DHCP) may differ depending on the Internet service provider or router. For details, refer to the instruction manuals provided by your Internet service provider, or those supplied with the router.

1

Press

HOME

, then select >

“Network” > “Network Set-up”.

2

Select “Wired Set-up”.

3

Select “Auto” to set the IP Address and proxy server automatically, or

“Custom” to set them manually.

4

Follow the instructions on the set-up screen.

Adjusting the server display settings

You can select home network servers to be displayed on the Home Menu. Up to 10 servers can be displayed in the Home Menu automatically.

1

Press

HOME

, then select >

“Network” > “Home Network Setup”.

2

Select “Server Display Settings”.

3

Select the server you want to display on the Home Menu, and adjust the settings.

24

GB

If you cannot connect to your home network

The TV detects if the server is being correctly recognised when you cannot connect it to your home network. If the diagnostic results indicate a failure, check possible causes, and network connections and settings.

1

Press

HOME

, then select >

“Network” > “Home Network Setup”.

2

Select “Server Diagnostics”.

The server diagnostic starts. When the server diagnostic is complete, the diagnostic result list appears.

25

GB

Additional Information

Troubleshooting

When the

1

(standby) indicator is flashing, count how many times it flashes (interval time is three seconds).

Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).

When the

1

(standby) indicator is not flashing, check the items in the tables as follows.

Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by qualified service personnel.

Condition Explanation/Solution

There is no picture (screen is dark) and no sound.

• Check the antenna (aerial)/cable connection.

• Connect the TV to the AC power (mains), and press

1

on the TV.

• If the 1 (standby) indicator lights up in red, press "/1 .

Tiny black points and/or bright points appear on the screen.

• The screen is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction.

Some programmes cannot be tuned.

Check the antenna (aerial) or dish.

The TV’s power cannot be turned on.

Check if

ENERGY SAVING

switch is on ( z

).

The TV turns off automatically (the TV enters standby mode).

The remote does not function.

• Check if the “Sleep Timer” is activated, or confirm the

“Duration” setting of “On Timer”.

• Check if the “Idle TV Standby” is activated.

Check if the “Presence Sensor” is activated. When no viewer is detected in front of the TV for a preset time, the picture automatically turns off, while leaving only the TV sound on.

Additionally, after 30 minutes in picture off mode, the TV will switch to standby mode.

Replace the batteries.

• Your TV may be in SYNC mode.

Press

SYNC MENU

, select “TV Control” and then select “Home

(Menu)” or “Options” to control the TV.

The “Parental Lock” password has been forgotten.

• Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)

The TV surrounds become warm.

When the TV is used for an extended period, the TV surrounds become warm.

You may feel hot when touching there by the hand.

26

GB

Specifications

System

Panel system

TV system

Colour/video system

Channel coverage

Sound output

LCD (Liquid Crystal Display) Panel

Analogue: Depending on your country/area selection: B/G/H, D/K, L, I, M

Digital: DVB-T2 (KDL-65HX923/60NX723/55HX923/55HX823/55NX723/46HX923/46HX823/

46NX723/40NX723 only)

DVB-T/DVB-C

Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)

Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4

Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41

D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69/M: A2-A13, A14-A79

Digital: VHF/UHF

10 W + 10 W + 10 W + 10 W (KDL-60NX72x)

10 W + 10 W + 10 W (KDL-65/55/46HX92x, KDL-55/46HX82x, KDL-55/46/40NX72x)

Input/Output jacks

Antenna (aerial) cable

/ AV1

75 ohm external terminal for VHF/UHF

21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video output.

Video input (phono jacks) t

AV2

/ COMPONENT IN Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i

Audio input (phono jacks)

HDMI IN1, 2, 3, 4 Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480i

Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital

Analogue audio input (minijack) (HDMI IN4 only)

PC Input

ARC (Audio Return Channel) (HDMI IN1 only)

DIGITAL AUDIO OUT

(OPTICAL)

AUDIO OUT / i

Digital optical jack (Two channel linear PCM, Dolby Digital)

PC IN

(KDL-65HX92x only)

/ PC IN

(except KDL-65HX92x)

Audio output (stereo minijack)

Headphones jack

PC Input (Mini D-sub 15-pin)

PC audio input (minijack)

1, 2 (HDD REC) USB port, USB HDD device port ( 2 only)

CAM (Conditional Access Module) slot

LAN 10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)

Model name KDL-

Power and others

Power requirements

Energy Efficiency Class

Screen size (measured diagonally)

Power consumption in “Home”/

“Standard” mode

65HX92x

220 V – 240 V AC, 50 Hz

A

Approx. 163.9 cm/65 inches

158 W

60NX72x

A

Approx. 152.5 cm/60 inches

114 W in “Shop”/

“Vivid” mode

Average annual energy consumption*

1

Standby power consumption*

2

276 W

219 kWh

193 W

166 kWh

0.3 W (16.5 W in software / EPG update mode)

0.3 W (15 W in software / EPG update mode)

Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)

Dimensions (Approx.) (w × h × d) with Table-Top Stand without Table-Top Stand

150.4 × 93.5 × 37.4 cm

150.4 × 90.0 × 4.5 cm

140.5 × 87.4 × 30.4 cm

140.5 × 84.4 × 3.3 cm

55HX92x

A

Approx. 138.8 cm/55 inches

113 W

190 W

157 kWh

0.25 W (16 W in software / EPG update mode)

127.8 × 80.3 × 30.8 cm

127.8 × 77.1 × 3.8 cm

(Continued)

27

GB

Model name KDL-

Mass (Approx.) with Table-Top Stand without Table-Top Stand

Supplied accessories

Optional accessories

65HX92x 60NX72x 55HX92x

51.7 kg

43.2 kg

34.3 kg

28.8 kg

31.6 kg

26.1 kg

See “Checking the accessories” (page 8).

Wall-Hanging Bracket: SU-WH500 (except KDL-65HX92x)

Wall-Mount Bracket: SU-WL700 (except KDL-65HX92x, KDL-60NX72x)

SU-WL500

TV stand: SU-B551S (KDL-55HX92x)

3D Glasses: TDG-BR250/TDG-BR200/TDG-BR100/TDG-BR50

Camera and Microphone Unit: CMU-BR100

USB Wireless LAN Adapter

0 ºC - 40 ºC

10% - 80% RH (non-condensing)

Operating temperature

Operating humidity

Model name KDL-

Power and others

Power requirements

Energy Efficiency Class

Screen size (measured diagonally)

Power consumption in “Home”/

“Standard” mode in “Shop”/

“Vivid” mode

Average annual energy consumption*

1

Standby power consumption*

2

55HX82x

220 V – 240 V AC, 50 Hz

A

Approx. 138.8 cm/55 inches

115 W

188 W

160 kWh

0.25 W (16 W in software / EPG update mode)

55NX72x

A

Approx. 138.8 cm/55 inches

112 W

192 W

164 kWh

0.3 W (15 W in software / EPG update mode)

Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)

Dimensions (Approx.) (w × h × d) with Table-Top Stand without Table-Top Stand

128.0 × 80.4 × 30.5 cm

128.0 × 77.4 × 2.7 cm

128.1 × 80.5 × 30.5 cm

128.1 × 77.4 × 2.7 cm

Mass (Approx.) with Table-Top Stand without Table-Top Stand

Supplied accessories

Optional accessories

28.3 kg

23.2 kg

28.2 kg

23.1 kg

See “Checking the accessories” (page 8).

Operating temperature

Operating humidity

Wall-Hanging Bracket: SU-WH500

Wall-Mount Bracket: SU-WL700

SU-WL500

TV stand: SU-B551S (KDL-55HX82x, KDL-55NX72x)

SU-B461S (KDL-46HX92x)

3D Glasses: TDG-BR250/TDG-BR200/TDG-BR100/TDG-BR50

Camera and Microphone Unit: CMU-BR100

USB Wireless LAN Adapter

0 ºC - 40 ºC

10% - 80% RH (non-condensing)

46HX92x

A

Approx. 116.8 cm/46 inches

84.0 W

149 W

117 kWh

0.25 W (15 W in software / EPG update mode)

108.1 × 69.2 × 25.8 cm

108.1 × 66.0 × 3.8 cm

24.0 kg

19.4 kg

Model name KDL-

Power and others

Power requirements

Energy Efficiency Class

Screen size (measured diagonally)

Power consumption in “Home”/

“Standard” mode in “Shop”/

“Vivid” mode

46HX82x

220 V – 240 V AC, 50 Hz

A

Approx. 116.8 cm/46 inches

83.0 W

153 W

46NX72x

A

Approx. 116.8 cm/46 inches

82.0 W

134 W

40NX72x

A

Approx. 101.6 cm/40 inches

66.0 W

129 W

28

GB

Model name KDL-

Average annual energy consumption*

1

46HX82x

115 kWh

46NX72x

120 kWh

Standby power consumption*

2

Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)

Dimensions (Approx.) (w × h × d) with Table-Top Stand without Table-Top Stand

0.25 W (15 W in software / EPG update mode)

108.3 × 69.3 × 25.5 cm

108.3 × 66.3 × 2.7 cm

0.25 W (14 W in software / EPG update mode)

108.4 × 69.4 × 25.5 cm

108.4 × 66.3 × 2.7 cm

Mass (Approx.) with Table-Top Stand without Table-Top Stand

Supplied accessories

Optional Accessories

21.1 kg

16.8 kg

20.1 kg

15.8 kg

See “Checking the accessories” (page 8).

Operating temperature

Operating humidity

Wall Hanging Bracket: SU-WH500

Wall-Mount Bracket: SU-WL700

SU-WL500

TV stand: SU-B461S (KDL-46HX82x, KDL-46NX72x)

SU-B401S (KDL-40NX72x)

3D Glasses: TDG-BR250/TDG-BR200/TDG-BR100/TDG-BR50

Camera and Microphone Unit: CMU-BR100

USB Wireless LAN Adapter

0 °C - 40 °C

10% - 80% RH (non-condensing)

40NX72x

96 kWh

0.25 W (14 W in software / EPG update mode)

94.9 × 61.8 × 21.0 cm

94.9 × 58.7 × 2.7 cm

16.9 kg

13.1 kg

*

1

Energy consumption per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.

*

2

Specified standby power is reached after the TV finishes necessary internal processes.

Design and specifications are subject to change without notice.

29

GB

Installing the Accessories (Wall-Mount/Wall Hanging

Bracket)

To Customers:

For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.

To Sony Dealers and Contractors:

Provide full attention to safety during the installation, periodic maintenance and examination of this product.

Your TV can be installed using the SU-WH500 (except KDL-65HX92x) (page 31) Wall-Hanging

Bracket (sold separately), or SU-WL700 (except KDL-65HX92x, KDL-60NX72x) (page 31) and

SU-WL500 (page 32) Wall-Mount Bracket (sold separately).

• Refer to the Instructions supplied with the Wall-Mount Bracket or Wall-Hanging Bracket to properly carry out the installation.

Refer to “Detaching the Table-Top Stand from the TV” (page 9).

Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.

When installing the TV on the wall, remove the screws from the rear of the TV. (They are fastened in the screw holes for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from children.

SU-WH500 SU-WL700, SU-WL500

B For KDL-65HX92x B Except KDL-65HX92x

×

2

×

2

×

2

×

4

×

2

×

2

×

2

×

2

Soft cloth

Soft cloth

Soft cloth

~

• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV.

• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

30

GB

SU-WH500 (except KDL-65HX92x)

Refer to the Instructions supplied with the SU-WH500 Wall-Hanging Bracket to properly carry out the installation.

×

2

Screw

Pulley

×

1

Tilt-up Bracket

Screw

×

1

Support Belt

Screw

~

• With the screen of the TV facing down, attach the SU-WH500 accessories.

• It is unnecessary to attach the Cushions supplied with SU-WH500. (

3

-1 in “Installation” of SU-WH500

Instructions)

• Attach the Pulleys to the upper two screw holes (see illustration) using screws supplied with SU-WH500.

(

3

-3 in “Installation” of SU-WH500 Instructions)

Attach the Tilt-up Bracket and the Support Belt (see illustration) using screws supplied with SU-WH500.

(

3

-4, 5 in “Installation” of SU-WH500 Instructions)

SU-WL700 (except KDL-65HX92x, KDL-60NX72x)

Precautions

Be sure to install the Wall-Mount Bracket securely to the wall following the instructions in this as well as the manual provided with the Wall-Mount Bracket. The numbers given in the parentheses indicate the installation steps described in the instruction manual provided with Wall-Mount Bracket.

1

Check the parts supplied with the Wall-Mount Bracket (

1

).

Refer to the instruction manual provided with the Wall-Mount Bracket.

2

Decide on the installation location. (

2

-1)

Refer to the following “TV installation dimensions table”. Allow for suitable clearance between the TV, the ceiling and protruding parts of the wall as instructed.

3

Install the Base Bracket on the wall. (

2

-2 through

3

)

Decide the positions of the screw on the wall and install the Base Bracket. Refer to the instruction manual provided with the Wall-Mount Bracket for details.

4

Detach the Table-Top Stand from the TV, if necessary. (

4

-1)

~

See “Detaching the Table-Top Stand from the TV” (page 9) for details.

(Continued)

31

GB

5

Attach the Mounting Bracket and the Lock Bracket. (

4

-3 through

4

-7)

Refer to the instruction manual provided with the Wall-Mount Bracket.

6

Prepare the paper template. (

5

-2)

1. Refer to the following “TV installation dimensions table” and mark the TV outline on the template.

2. Tape the template to the wall as instructed in the manual provided with the Wall-Mount

Bracket.

Follow the instruction manual provided with the Wall-Mount Bracket to complete the installation. (

5

-3 through

6

)

SU-WL500

For KDL-65HX92x

Mounting Hook

Screw

(+PSW

6 × 16)

For KDL-60/55/46/40NX72x,

KDL-55/46HX92x, KDL-55/46HX82x

Mounting Hook

Screw

(+PSW

6 × 16)

×

4

×

2

×

2

Soft cloth

Soft cloth

~

Attach the Mounting Hook using the four screws supplied with the Wall-Mount Bracket.

• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.

Screw and Hook locations diagram/table

Model Name

KDL-

65HX92x

60NX72x

55HX92x/55HX82x/55NX72x

46HX92x/46HX82x/46NX72x

40NX72x

Screw location

SU-WL500

d, g e, j

Hook location

SU-WL500

a b

32

GB

SU-WL500

Screw location

When installing the Mounting Hook on the TV.

Hook location

When installing the TV onto the Base Bracket.

a b c

TV installation dimensions table

1

SU-WH500

A

B

Screen centre point

2

SU-WL700

C

D

E

Screen centre point

(Continued)

33

GB

3

SU-WL500

A E

F

B

C

D

H

G

Screen centre point

Unit: cm

Model

Name

KDL-

Display dimensions

Screen centre dimension

C D

Length for each mounting angle

Angle (0°) Angle (20°)

E

F G H

A B

1 2 3 1 2 3 1 2 3 2 3 2 3 2 3

65HX92x

60NX72x

55HX92x

55HX82x

55NX72x

46HX92x

46HX82x

46NX72x

40NX72x

150.4 90.0

140.5

127.8

128.0

128.1

108.1

108.3

108.4

94.9

84.4

77.1

77.4

77.4

66.0

66.3

66.3

58.7

-

32.7

-

0.1

-

3.0

76.1

-

46.1

-

46.4

4.3

-

10.6

8.8

-

38.3

34.6

-

85.0

79.4

-

48.1

47.7

29.9

0.5

6.5

69.6

39.3

46.2

5.2

5.8

9.8

37.6

33.1

72.8

72.8

45.5

47.9

29.7

0.5

6.5

69.5

39.5

46.4

4.1

4.7

8.7

36.6

32.1

72.9

72.9

45.3

47.7

29.7

0.5

6.5

69.5

39.5

46.4

4.1

4.7

8.7

36.6

32.1

72.9

72.9

45.2

47.6

24.3

5.1

12.0

58.5

39.3

46.2

5.2

5.8

9.8

33.8

29.3

62.3

62.3

45.5

47.9

24.2

5.1

12.0

58.6

39.5

46.4

4.1

4.7

8.7

32.8

28.3

62.5

62.5

45.3

47.7

24.2

5.1

12.0

58.6

39.5

46.4

4.1

4.7

8.7

32.8

28.3

62.5

62.5

45.2

47.6

20.5

10.3

15.7

51.1

39.5

46.4

4.1

4.7

8.7

30.2

25.7

55.4

55.4

45.2

47.6

Figures in the table may differ slightly depending on the installation.

WARNING

The wall that the TV will be installed should be capable of supporting a weight of at least four times that of the

TV. Refer to “Specifications” (page 27-29) for its weight.

34

GB

Safety

Information

Installation/Set-up

Install and use the TV set in accordance with the instructions as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries.

Installation

The TV set should be installed near an easily accessible mains socket.

• Place the TV set on a stable, level surface.

• Only qualified service personnel should carry out wall installations.

For safety reasons, it is strongly recommended that you use Sony accessories, including:

Wall Hanging Bracket:

SU-WH500 (except

KDL-65HX92x)

– Wall Mount Bracket:

SU-WL700 (except KDL-65HX92x,

KDL-60NX72x)

SU-WL500

TV stand:

SU-B551S (KDL-55HX92x,

KDL-55HX82x, KDL-55NX72x)

SU-B461S (KDL-46HX92x,

KDL-46HX82x, KDL-46NX72x)

SU-B401S (KDL-40NX72x)

• Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook.

The diameter and length of the screws differ depending on the Wall-mount bracket model.

Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.

8 mm - 12 mm

Screw (supplied with the

Wall-mount bracket)

Mounting Hook

Hook attachment on rear of TV set

Transporting

Before transporting the TV set, disconnect all cables.

• Two or three people are needed to transport a large TV set.

• When transporting the TV set by hand, hold it as shown in the illustration. Do not put stress on the LCD panel and the frame around the screen.

KDL-65HX92x

• When transporting the TV set, do not subject it to jolts or excessive vibration.

• When transporting the TV set for repairs or when moving, pack it using the original carton and packing material.

Ventilation

Never cover the ventilation holes or insert anything in the cabinet.

• Leave space around the TV set as shown below.

• It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation.

Installed on the wall

30 cm

10 cm 10 cm

10 cm

Leave at least this space around the set.

Installed with stand

30 cm

10 cm

10 cm 6 cm

Leave at least this space around the set.

• To ensure proper ventilation and prevent the collection of dirt or dust:

– Do not lay the TV set flat, install upside down, backwards, or sideways.

Do not place the TV set on a shelf, rug, bed or in a closet.

– Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc.

Do not install the TV set as shown below.

Air circulation is blocked.

Wall Wall

Mains lead

Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries:

– Use only mains leads supplied by

Sony, not other suppliers.

– Insert the plug fully into the mains socket.

Operate the TV set on a 220-240 V AC supply only.

– When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables.

– Disconnect the mains lead from the mains socket before working on or moving the TV set.

– Keep the mains lead away from heat sources.

– Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire.

Notes

• Do not use the supplied mains lead on any other equipment.

Do not pinch, bend, or twist the mains lead excessively. The core conductors may be exposed or broken.

Do not modify the mains lead.

• Do not put anything heavy on the mains lead.

• Do not pull on the mains lead itself when disconnecting the mains lead.

• Do not connect too many appliances to the same mains socket.

Do not use a poor fitting mains socket.

Prohibited Usage

Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries.

Location:

• Outdoors (in direct sunlight), at the seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke.

• If the TV is placed in the changing room of a public bath or hot spring, the TV may be damaged by airborne sulfur, etc.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor colour.

Should this occur, allow moisture to evaporate completely before powering the TV on.

KDL-60/55/46/40NX72x,

KDL-55/46HX92x,

KDL-55/46HX82x

(Continued)

35

GB

• Never spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the

TV set.

Environment:

• Places that are hot, humid, or excessively dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.

• Do not place the TV in a humid or dusty space, or in a room with oily smoke or steam (near cooking tables or humidifiers). Fire, electric shock, or warping may result.

• Do not install the TV in places subject to extreme temperature such as in direct sunlight, near a radiator or a heating vent. The TV may overheat in such condition which can cause deformation of the enclosure and/or TV malfunction.

off, pull the plug from the mains to disconnect the TV set completely.

• However, some TV sets may have features that require the TV set to be left in standby to work correctly.

For children

• Do not allow children to climb on the

TV set.

Keep small accessories out of the reach of children, so that they are not mistakenly swallowed.

If the following problems occur...

Turn off

the TV set and unplug the mains lead immediately if any of the following problems occur.

Ask your dealer or Sony service centre to have it checked by qualified service personnel.

When:

Mains lead is damaged.

– Poor fitting of mains socket.

TV set is damaged by being dropped, hit or having something thrown at it.

– Any liquid or solid object falls through openings in the cabinet.

Warning

To prevent the spread of fire, keep candles or other open flames away from this product at all time.

Situation:

• Do not use when your hands are wet, with the cabinet removed, or with attachments not recommended by the manufacturer. Disconnect the TV set from mains socket and aerial during lightning storms.

• Do not install the TV so that it sticks out into an open space. Injury or damage from a person or object bumping into the

TV may result.

Broken pieces:

• Do not throw anything at the TV set. The screen glass may break by the impact and cause serious injury.

• If the surface of the TV set cracks, do not touch it until you have unplugged the mains lead. Otherwise electric shock may result.

When not in use

• If you will not be using the TV set for several days, the TV set should be disconnected from the mains for environmental and safety reasons.

• As the TV set is not disconnected from the mains when the TV set is just turned

36

GB

Keep this Instruction manual safe you’ll need it

Television in the UK is going digital, bringing us all more.

Please see overleaf to find out when your area switches to digital.

Digital UK is the independent, non-profit organisation leading the process of digital TV switchover in the UK. Digital UK provides impartial information on what people need to do to prepare for the move to digital, and when they need to do it.

How the switchover affects your TV equipment:

Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket (check if you can get digital TV through your aerial now, or whether you'll have to wait until switchover, at

www.digitaluk.co.uk

).

When the TV switchover happens in your area, there are at least two occasions when you will need to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up new ones. Digital UK, the body leading the digital TV switchover, will advise you when you need to retune during the switchover.

37

GB

How to re-tune:

1 Press

"

HOME

"

on the remote

2 Press

G/g to select "Settings"

3 Press

F/f

to select "Digital Set-up", then press

4 Press to select "Digital Auto Tuning"

5 Press

G

to select "Yes" then press to start "Digital Auto Tuning"

6 Follow the on screen instructions.

If you are missing any channels, it may be that they are not available in your area, or that your aerial needs upgrading.

If you have any questions, please contact Sony on

0844 8466555

or call Digital UK on

0845 6 50 50

50

or visit

www.digitaluk.co.uk

38

GB

†Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends.

Rates may vary for calls from non-BT lines.

For useful information about Sony products

© 2011 Sony Corporation

4-270-412-

15

(1)

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 152.4 cm (60") LCD
  • Full HD 1920 x 1080 pixels
  • DVB-T NTSC 3.58, NTSC 4.43, PAL, PAL BG, PAL DK, PAL I, PAL L, PAL M, SECAM
  • Wi-Fi Ethernet LAN
  • 182 W

Related manuals