Sony BDVE3100 Home Theater System User Manual

Add to my manuals
72 Pages

advertisement

Sony BDVE3100 Home Theater System User Manual | Manualzz

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\010COV.fm

masterpage: Right

4-446-733-12(1)

Blu-ray Disc™/

DVD Home Theatre

System

Operating Instructions

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\020REG.fm

masterpage: Left

WARNING

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc.

Do not expose the appliance to naked flame sources (for example, lighted candles).

Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire.

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

Indoor use only.

CAUTION

The use of optical instruments with this product will increase eye hazard.

As the laser beam used in this Blu-ray Disc/

DVD Home Theatre System is harmful to eyes, do not attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

Pick-up unit of this appliance is classified as a

CLASS 3R LASER product. Visible and invisible laser radiation is emitted when the laser protective housing is opened, so be sure to avoid direct eye exposure.

This marking is located on the laser protective housing inside the enclosure.

This appliance is classified as a CLASS 1

LASER product. This marking is located on the rear exterior.

The nameplate is located on the bottom exterior.

For the customers in the

U.S.A.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

These following indications are located on the rear exterior.

This symbol is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Owner’s Record

The model and serial numbers are located on the bottom exterior of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No._____________________________

Serial No._____________________________

The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations.

2

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\020REG.fm

masterpage: Right

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna

(aerial).

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/

TV technician for help.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals in order to meet FCC emission limits.

Blu-ray Disc/DVD receiver

(HBD-E6100/HBD-E4100/

HBD-E3100/HBD-E2100)

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in

Supplement C to OET65.

This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

Important Safety

Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

3

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\020REG.fm

masterpage: Left

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

For the customers in

Canada

To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance.

The serial number is located on the bottom exterior.

Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals.

Blu-ray Disc/DVD receiver

(HBD-E6100/HBD-E4100/

HBD-E3100/HBD-E2100)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of this device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.

This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

Precautions

On power sources

• The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.

• As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.

On watching 3D video images

Some people may experience discomfort

(such as eye strain, fatigue, or nausea) while watching 3D video images. Sony recommends that all viewers take regular breaks while watching 3D video images. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual and/or the caution message of any other device used with, or Blu-ray Disc contents played with this product and (ii) our website

(http://esupport.sony.com/) for the latest information. The vision of young children

(especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images.

Adults should supervise young children to ensure they follow the recommendations listed above.

4

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\020REG.fm

masterpage: Right

Copy Protection

• Please be advised of the advanced content protection systems used in both Blu-ray Disc and DVD media. These systems, called

AACS (Advanced Access Content System) and CSS (Content Scramble System), may contain some restrictions on playback, analog output, and other similar features.

The operation of this product and the restrictions placed may vary depending on the date of purchase, as the governing board of the AACS may adopt or change its restriction rules after the time of purchase.

• Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided at the Cinavia Online Consumer

Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information

Center, P.O. Box 86851, San Diego, CA,

92138, USA.

Copyrights and Trademarks

• This system incorporates with Dolby*

Digital and Dolby Pro Logic adaptive matrix surround decoder and the DTS** Digital

Surround System.

* Manufactured under license from

Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

** Manufactured under license under

U.S. Patent Nos: 5,956,674;

5,974,380; 6,226,616; 6,487,535;

7,212,872; 7,333,929; 7,392,195;

7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the

Symbol together are registered trademarks of DTS, Inc. Product includes software. © DTS, Inc. All

Rights Reserved.

• This system incorporates High-Definition

Multimedia Interface (HDMI

TM

) technology.

The terms HDMI and HDMI High-

Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

• Java is a trademark of Oracle and/or its affiliates.

• “DVD logo” is a trademark of DVD Format/

Logo Licensing Corporation.

• “Blu-ray Disc”, “Blu-ray”, “Blu-ray 3D”,

“BD-LIVE”, “BONUSVIEW”, and logos are trademarks of the Blu-ray Disc

Association.

• “Blu-ray Disc”, “DVD+RW”, “DVD-RW”,

“DVD+R”, “DVD-R”, “DVD VIDEO”, and

“CD” logos are trademarks.

• “BRAVIA” is a trademark of Sony

Corporation.

• “AVCHD 3D/Progressive” and the

“AVCHD 3D/Progressive” logo are trademarks of Panasonic Corporation and

Sony Corporation.

• , “XMB”, and “xross media bar” are trademarks of Sony Corporation and Sony

Computer Entertainment Inc.

• “PlayStation” is a registered trademark of

Sony Computer Entertainment Inc.

• “Sony Entertainment Network logo” and

“Sony Entertainment Network” are trademarks of Sony Corporation.

5

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\020REG.fm

masterpage: Left

• Music and video recognition technology and related data are provided by Gracenote

®

.

Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com.

CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000-present Gracenote.

Gracenote Software, copyright © 2000present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a nonexhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, the

Gracenote logo and logotype, and the

“Powered by Gracenote” logo are either a registered trademark or a trademark of

Gracenote, Inc. in the United States and/or other countries.

• Wi-Fi

®

, Wi-Fi Protected Access

®

Alliance

®

Alliance.

and Wi-Fi

are registered marks of the Wi-Fi

• Wi-Fi CERTIFIED™, WPA™, WPA2™ and Wi-Fi Protected Setup™ are marks of the Wi-Fi Alliance.

• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United

States and in other countries.

• Android is a trademark of Google Inc.

• The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Sony

Corporation is under license. Other trademarks and trade names are those of their respective owners.

• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and

Thomson.

• This product incorporates proprietary technology under license from Verance

Corporation and is protected by U.S. Patent

7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation.

Copyright 2004-2010 Verance Corporation.

All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

• Windows Media is either a registered trademark or trademark of Microsoft

Corporation in the United States and/or other countries.

This product is protected by certain intellectual property rights of Microsoft

Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

Content owners use Microsoft

®

PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses

PlayReady technology to access PlayReadyprotected content and/or WMDRMprotected content. If the device fails to properly enforce restrictions on content usage, content owners may require

Microsoft to revoke the device’s ability to consume PlayReady-protected content.

Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

• DLNA™, the DLNA Logo and DLNA

CERTIFIED™ are trademarks, service marks, or certification marks of the Digital

Living Network Alliance.

6

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\020REG.fm

masterpage: Right

• Opera

®

Devices SDK from Opera Software

ASA. Copyright 1995 - 2013 Opera

Software ASA. All rights reserved.

• All other trademarks are trademarks of their respective owners.

• Other system and product names are generally trademarks or registered trademarks of the manufacturers. ™ and ® marks are not indicated in this document.

End User License

Information

Gracenote

®

End User License

Agreement

This application or device contains software from Gracenote, Inc. of Emeryville, California

(“Gracenote”). The software from Gracenote

(the “Gracenote Software”) enables this application to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information (“Gracenote Data”) from online servers or embedded databases

(collectively, “Gracenote Servers”) and to perform other functions. You may use

Gracenote Data only by means of the intended

End-User functions of this application or device.

You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote

Servers for your own personal noncommercial use only. You agree not to assign, copy, transfer or transmit the Gracenote

Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR

EXPLOIT GRACENOTE DATA, THE

GRACENOTE SOFTWARE, OR

GRACENOTE SERVERS, EXCEPT AS

EXPRESSLY PERMITTED HEREIN.

You agree that your non-exclusive license to use the Gracenote Data, the Gracenote

Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the

Gracenote Software, and Gracenote Servers.

Gracenote reserves all rights in Gracenote

Data, the Gracenote Software, and the

Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that

Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name.

The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service.

The Gracenote Software and each item of

Gracenote Data are licensed to you “AS IS.”

Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the

Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that

Gracenote deems sufficient. No warranty is made that the Gracenote Software or

Gracenote Servers are error-free or that functioning of Gracenote Software or

Gracenote Servers will be uninterrupted.

Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time.

7

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\020REG.fm

masterpage: Left

GRACENOTE DISCLAIMS ALL

WARRANTIES EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO,

IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, TITLE, AND

NON-INFRINGEMENT. GRACENOTE

DOES NOT WARRANT THE RESULTS

THAT WILL BE OBTAINED BY YOUR

USE OF THE GRACENOTE SOFTWARE

OR ANY GRACENOTE SERVER. IN NO

CASE WILL GRACENOTE BE LIABLE

FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGES OR FOR ANY

LOST PROFITS OR LOST REVENUES.

© Gracenote, Inc. 2009

About These Operating

Instructions

• The instructions in these Operating

Instructions describe the controls on the remote control. You can also use the controls on the unit if they have the same or similar names as those on the remote control.

• In this manual, “disc” is used as a general reference for BDs, DVDs, or CDs unless otherwise specified by the text or illustrations.

• The instructions in this manual are for

BDV-E6100, BDV-E4100, BDV-E3100, and BDV-E2100. BDV-E6100 is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “BDV-E6100 only”.

• Some illustrations are presented as conceptual drawings, and may be different from the actual products.

• The items displayed on the TV screen may vary depending on the area.

• The default setting is underlined.

8

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\010COVTOC.fm

masterpage: Right

Table of Contents

About These Operating Instructions .... 8

Unpacking .......................................... 10

Guide to Parts and Controls ............... 13

Getting Started

Step 1: Installing the

Speakers .............................. 17

Step 2: Connecting the

System ................................. 18

Connecting the speakers ....... 18

Connecting the TV .................. 19

Connecting the other equipment ........................... 20

Connecting the antenna

(aerial) ................................. 21

Step 3: Preparing for Network

Connection .......................... 21

Step 4: Performing the Easy

Setup .................................... 23

Step 5: Selecting the Playback

Source .................................. 24

Step 6: Enjoying Surround

Sound ................................... 24

Playback

Playing a Disc .................................... 26

Playing from a USB Device ............... 28

Enjoying music from a Bluetooth device .......................................... 28

Connecting to a smartphone by

One-touch listening function

(NFC) .......................................... 30

Playing via a Network ........................ 32

Available Options .............................. 35

Sound Adjustment

Selecting the Audio Format,

Multilingual Tracks, or

Channel ....................................... 37

Enjoying Multiplex Broadcast

Sound .......................................... 38

Tuner

Listening to the Radio ........................ 38

Other Operations

Using the Control for HDMI Function for “BRAVIA” Sync ................... 40

Setting the Speakers ........................... 40

Using the Sleep Timer ........................ 42

Deactivating the Buttons on the

Unit ............................................. 42

Controlling Your TV with the

Supplied Remote Control ............ 42

Saving Power in Standby Mode ......... 43

Browsing Websites ............................ 43

Settings and

Adjustments

Using the Setup Display ..................... 45

[Network Update] .............................. 46

[Screen Settings] ................................ 46

[Audio Settings] ................................. 48

[BD/DVD Viewing Settings] ............. 49

[Parental Control Settings] ................. 49

[System Settings] ............................... 50

[Network Settings] ............................. 51

[Easy Network Settings] .................... 52

[Resetting] .......................................... 52

Additional Information

Precautions ......................................... 52

Notes about Discs ............................... 55

Troubleshooting ................................. 55

Playable Discs .................................... 60

Playable Types of Files ...................... 61

Supported Audio Formats .................. 63

Specifications ..................................... 63

Language Code List ........................... 66

Index ................................................... 68

9

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\030UNP.fm

masterpage: Left

Unpacking

• Operating Instructions

• Quick Setup Guide

• Speaker Installation Guide

• Remote control (1)

• R6 (size AA) batteries (2)

• FM wire antenna (aerial) (1)

BDV-E6100 only

• Front speakers (2)

• Subwoofer (1)

• Speaker-bottom covers (4)

• Bases (4)

• Lower parts of the front and surround speakers (4)

• Surround speakers (2)

• Screws (large) (4)

• Screws (small) (16)

• Center speaker (1)

10

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\030UNP.fm

masterpage: Right

BDV-E4100 only

• Front speakers (2)

• Lower parts of the front speakers (2)

• Surround speakers (2)

• Center speaker (1)

• Subwoofer (1)

• Speaker-bottom covers (2)

• Bases (2)

• Screws (large) (2)

• Screws (small) (8)

BDV-E3100 only

• Front speakers (2)

• Surround speakers (2)

• Center speaker (1)

11

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\030UNP.fm

masterpage: Left

• Subwoofer (1)

BDV-E2100 only

• Front speakers (2)

• Surround speakers (2)

• Center speaker (1)

• Subwoofer (1)

12

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\030UNP.fm

masterpage: Right

Guide to Parts and Controls

For more information, refer to the pages indicated in parentheses.

Front panel

Slot

BDV-E2100 only

A "/1 (on/standby)

Turns on the unit, or sets it to standby mode.

B Disc tray (page 26)

C

(N-Mark) (page 31)

Position the NFC-compatible device near this indication to activate the NFC function.

D Play operation buttons

Z (open/close)

N a) b)

(play)

x b)

(stop)

VOL +/–

a)

./> (previous/next)

FUNCTION (page 24)

Selects the playback source.

a)

N and VOL + buttons have a tactile dot.

Use the tactile dot as a reference when b) operating the unit.

Hold down N on the unit for more than

2 seconds, the built-in sound demonstration will be played back on the system. Press x to stop the demonstration.

Note

During the demonstration, the volume level may be higher than the volume level you have set.

E

(USB) port (page 28)

(BDV-E6100/BDV-E4100/

BDV-E3100 only) Place your fingernail in the slot to open the cover.

F

(remote control sensor)

G Front panel display

H LED indicator

White: Lights up when the unit is turned on.

Blue (for Bluetooth status):

– System is ready for pairing: Flashes quickly

– During pairing: Flashes quickly

– During connection: Flashes

– Connection is established: Lights up

13

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\030UNP.fm

masterpage: Left

Indicators in the front panel display

A Lights up when stereo sound is

received. (Radio only)

B Lights up when repeat play is

activated.

C Lights up when the system is

playing via the PARTY

STREAMING function.

D Lights up when muting is on.

E Lights up when the HDMI (OUT)

jack is correctly connected to an

HDCP (High-bandwidth Digital

Content Protection) compliant equipment with HDMI input.

F Displays the system’s status,

such as radio frequency, etc.

When you press DISPLAY, the stream information/decoding status is displayed when the function is set to

“TV”.

The stream information/decoding status may not appear depending on the stream or item being decoded.

Note

When the [Main Unit illumination] is set to

[Auto] in [System Settings], the front panel display lights off if you do not operate the unit for about 10 seconds.

Rear panel

A SPEAKERS jacks (page 18)

B TV (DIGITAL IN OPTICAL) jack

(page 19)

C LAN (100) terminal (page 21)

D HDMI (OUT) jack (page 19)

E AUDIO IN (L/R) jacks (page 20)

F ANTENNA (FM) terminal

(page 21)

14

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\030UNP.fm

masterpage: Right

Remote control

Number 5, AUDIO, VOL +, and N buttons have a tactile dot. Use the tactile dot as a reference when operating the remote control.

• : For TV operations

(For details, see “Controlling Your TV with the Supplied Remote Control”

(page 42).)

The system automatically returns to standby mode

If any button on the unit or remote control is not pressed within 30 minutes, the system automatically returns to standby mode.

A Z (open/close)

Opens or closes the disc tray.

SPEAKERS TV

yAUDIO

Selects whether TV sound is output from the system’s speakers or the TV’s speaker(s). This function works only when you set [Control for HDMI] to

[On] (page 50).

TV "/1 (on/standby) (page 43)

Turns on the TV or sets it to standby mode.

"/1 (on/standby) (pages 23, 39)

Turns on the system or sets it to standby mode.

B Number buttons (pages 39, 43)

Enters the title/chapter numbers, preset station number, etc.

AUDIO (page 37)

Selects the audio format/track.

SUBTITLE

Selects the subtitle language when multilingual subtitles are recorded on a

BD-ROM/DVD VIDEO.

C Color buttons

Short cut keys for selecting items on some BD menus (can also be used for

Java interactive operations on BDs).

D TOP MENU

Opens or closes the BD’s or DVD’s

Top Menu.

POP UP/MENU

Opens or closes the BD-ROM’s Popup Menu, or the DVD’s menu.

OPTIONS (pages 25, 35, 44)

Displays the options menu on the TV screen or in the front panel display.

(The location differs depending on the selected function.)

RETURN

Returns to the previous display.

15

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\030UNP.fm

masterpage: Left

B/V/v/b

Moves the highlight to a displayed item.

(enter)

Enters the selected item.

E MUSIC EQ

Selects the pre-programmed equalizer when listening to music.

HOME (pages 23, 40, 45)

Enters or exits the system’s home menu.

SOUND MODE (page 24)

Selects the sound mode.

SEN

Accesses the “Sony Entertainment

Network™” online service.

NETFLIX

Accesses the “NETFLIX” online service.

F Playback operation buttons

See “Playback” (page 26).

m/M (fast/slow/freeze frame)

Fast reverse/fast forward during playback. Each time you press the button, the search speed changes.

Activates slow-motion play when pressed for more than one second in pause mode.

Plays one frame at a time when pressed in pause mode.

Note

During Blu-ray 3D Disc playback, slowmotion reverse play and single-frame reverse play are not available.

./> (previous/next)

Selects the previous/next chapter, track, or file.

N PLAY

Starts or re-starts playback (resume play).

Activates One-Touch Play (page 40)

when the system is on and set to the

“BD/DVD” function.

X PAUSE

Pauses or re-starts playback.

x STOP

Stops playback and remembers the stop point (resume point). The resume point for a title/track is the last point you played or the last photo for a photo folder.

Stops the built-in sound demonstration.

Radio operation buttons

See “Tuner” (page 38).

TUNING +/–

PRESET +/–

G MUTING

Turns off the sound temporarily.

VOL +/–

Adjusts the volume.

TV VOL +/–

Adjusts the TV volume.

TV INPUT

Switches the TV’s input source between the TV and other input sources.

H DISPLAY (pages 27, 32, 39, 44)

Displays playback and web browsing information on the TV screen.

Displays the preset radio station, frequency, etc., in the front panel display.

I FOOTBALL

Produces optimized sound for watching football match broadcasting.

16

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Right

J BLUETOOTH

Selects the “BT” function.

When the blue LED indicator lights off during “BT” function, press to start pairing or connect to paired Bluetooth device.

FUNCTION (page 24)

Selects the playback source.

K SLEEP (page 42)

Sets the sleep timer.

Getting Started

Step 1: Installing the

Speakers

Install the speakers by referring to the illustration below.

A

Front left speaker (L)

B Front right speaker (R)

C

Center speaker

D

Surround left speaker (L)

E

Surround right speaker (R)

F Subwoofer

G

TV

Installing the surround speakers in rear position

(Speaker layout: [Standard])

F G C

A B

D E

17

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Left

Installing all speakers in front position

(Speaker layout: [All Front])

D A F G C B E

Step 2: Connecting the

System

Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are made.

(BDV-E6100/BDV-E4100 only) To assemble the speakers, refer to the supplied

“Speaker Installation Guide”.

Note

When you connect other equipment with a volume control, turn down the volume of the equipment to a level where sound is not distorted.

Note

• Be sure to select the speakers layout setting

(page 41) according to your speakers

placement.

• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result.

• Do not lean or hang on a speaker, as it may fall down.

Tip

You can install the speakers on a wall. For details, refer to the supplied “Speaker Installation

Guide”.

Connecting the speakers

Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.

When connecting to the unit, insert the connector until it clicks.

Red

(Front right speaker (R))

Purple

(Subwoofer)

Gray

(Surround right speaker (R))

18

US

White

(Front left speaker (L))

Green

(Center speaker)

Blue

(Surround left speaker (L))

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Right

Connecting the TV

Select one of the following connection methods according to the input jacks on your TV.

A

B C

Video connection

A

HDMI cable

1)

(not supplied) or

2)

1)

High Speed HDMI cable

2)

The Audio Return Channel (ARC) function enables the TV to output sound through the system with an HDMI connection, without performing the B or C connection below. To set the ARC function on

this system, see [Audio Return Channel] (page 50). To check the compatibility of your TV’s ARC

function, refer to the operating instructions supplied with your TV.

Audio connections

If your TV’s HDMI jack is not compatible with the ARC function, make an appropriate audio connection (B or C) for listening to TV sound via the system’s speakers.

B

High quality

Optical digital cord (not supplied)

DIGITAL OUT

OPTICAL

C

Audio cable (not supplied)

AUDIO

OUTPUT

L

R

Standard quality

Note

To enjoy TV sound, select “TV” function for connection B or “AUDIO” function for connection C.

19

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Left

Connecting the other equipment

If your TV is compatible with Audio Return Channel (ARC) function

Connect audio and video jacks of your equipment to the TV. The equipment sound can be output through the TV to the system by just making the HDMI connection A in

“Connecting the TV” (page 19).

TV

Equipment

(Set-top box, VCR, PlayStation

®

, or digital satellite receiver, etc.)

System

Signal flow

: Video signal

: Audio signal

If your TV is not compatible with Audio Return Channel (ARC) function

To enjoy the equipment sound via this system, make an appropriate audio connection (A or B).

A

Optical digital cord (not supplied)

A

High quality

DIGITAL OUT

OPTICAL

B

B

Audio cable (not supplied)

AUDIO

OUTPUT

L

R

Standard quality

Note

• If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings]

to [Off] (page 50).

• You can enjoy equipment sound by selecting “TV” function for connection A or “AUDIO” function for connection B.

20

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Right

Connecting the antenna

(aerial)

FM wire antenna (aerial)

(supplied)

Note

• Be sure to fully extend the FM wire antenna

(aerial).

• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.

Step 3: Preparing for

Network Connection

Tip

To connect the system to your network, perform

[Easy Network Settings]. For details, see “Step 4:

Performing the Easy Setup” (page 23).

Select the method based on your LAN

(Local Area Network) environment.

• If you use a wireless LAN

The system has built-in Wi-Fi, and you can connect the system to the network by making the network settings.

• If you use other than a wireless LAN

Use a LAN cable to connect to the LAN

(100) terminal on the unit.

Broadband router

LAN cable (not supplied)

Tip

A shielded interface cable (LAN cable), straight or crossover, is recommended.

21

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Left

Before performing the network settings

When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)compatible, you can easily set the network settings with the WPS button.

If not, check the following information in advance, and record it in the space provided below.

• The network name (SSID*) that identifies your network**.

• If security is set on your wireless network, the security key (WEP key,

WPA key)**.

* SSID (Service Set Identifier) is a name that identifies a particular wireless network.

** You need to check the settings of your wireless

LAN router to get the information about SSID and security key. For details:

– visit the following website: http://www.sony.com/blurayhtsupport/

– refer to the operating instructions supplied with the wireless LAN router

– consult the manufacturer of the wireless

LAN router

About wireless LAN security

Since communication via the wireless LAN function is established by radio waves, the wireless signal may be susceptible to interception. To protect wireless communication, this system supports various security functions. Be sure to correctly configure the security settings in accordance with your network environment.

x No Security

Although you can easily make settings, anyone can intercept wireless communication or intrude into your wireless network, even without any sophisticated tools. Keep in mind that there is a risk of unauthorized access or interception of data.

x WEP

WEP applies security to communications to prevent outsiders from intercepting communications or intruding into your wireless network. WEP is a legacy security technology that enables older devices which do not support TKIP/AES to be connected.

x WPA-PSK (TKIP), WPA2-PSK

(TKIP)

TKIP is a security technology developed in response to the deficiencies of WEP. TKIP assures a higher security level than WEP.

x WPA-PSK (AES), WPA2-PSK

(AES)

AES is a security technology that uses an advanced security method distinct from

WEP and TKIP. AES assures a higher security level than WEP or TKIP.

22

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Right

Step 4: Performing the

Easy Setup

Before performing Step 4

Make sure all connections are secure, and then connect the AC power cord (mains lead).

Follow the Steps below to make the basic adjustments and network settings for the system.

Displayed items vary depending on the area.

1

Insert two R6 (size AA) batteries

(supplied) by matching the 3

and # ends on the batteries to

the markings inside the compartment.

2

Turn on the TV.

3

Press [/1.

4

Switch the input selector on your TV so that the signal from the system appears on the TV screen.

The [Easy Initial Settings] for OSD language selection appears.

5

Perform [Easy Initial Settings].

Follow the on-screen instructions to make the basic settings using

B/V/v/b and

.

B/V/v/b

6

After completing the [Easy Initial

Settings], press

V/v to select

[Easy Network Settings], then press .

The [Easy Network Settings] display appears.

7

Follow the on-screen instructions to make the network settings using

B/V/v/b and

.

If the system cannot connect to the

network, see “Network connection”

(page 59) or “Wireless LAN connection” (page 59).

To recall the [Easy Network

Settings] display

1

Press HOME.

The home menu appears on the TV screen.

2

Press B/b to select [Setup].

3

Press V/v to select [Easy Network

Settings], then press .

23

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Left

Step 5: Selecting the

Playback Source

Press FUNCTION repeatedly until the function you want appears in the front panel display.

When you press FUNCTION once, the current function appears in the front panel display, then each time you press

FUNCTION, the function changes cyclically as follows.

“BD/DVD” t “USB” t “FM” t

“TV” t “BT” t “AUDIO”

Function and playback source

“BD/DVD”

Disc or network device to be played by the system

“USB”

USB device that is connected to the (USB)

port (page 13)

“FM”

FM radio (page 38)

“TV”

Equipment (TV, etc.) that is connected to the

TV (DIGITAL IN OPTICAL) jack, or a TV compatible with the Audio Return Channel function that is connected to the HDMI

(OUT) jack (page 19)

“BT”

Audio contents of a Bluetooth device

“AUDIO”

Equipment that is connected to the AUDIO

IN (L/R) jacks (page 20)

Tip

• Some functions may be changed via the TV screen by pressing FUNCTION, V/v, and .

• You can also press BLUETOOTH on the remote control to select “BT” function.

Step 6: Enjoying

Surround Sound

After performing the previous Steps and starting playback, you can easily enjoy preprogrammed sound modes that are tailored to different kinds of sound sources. They bring the exciting and powerful sound of movie theaters into your home.

Selecting the sound mode

Press SOUND MODE repeatedly during playback until the mode you want appears in the front panel display or on the TV screen.

Auto

The system automatically selects [Movie] or

[Music] to produce the sound effect depending on the disc or sound stream.

• 2-channel source: The system simulates surround sound from 2-channel sources and outputs sound from the 5.1 channel speakers.

• Multi-channel source: The system outputs sound from the speakers as it was recorded.

Movie

The system provides the optimized sound for watching movies.

Music

The system provides the optimized sound for listening to music.

Digital Music Enhancer

[Digital Music]

The system reproduces an enhanced sound for compressed audio.

Night

Suitable for watching movies at night by reducing loud sounds while maintaining clear dialog.

Demo Sound

The system provides ear-catching sound, suitable for demonstration.

24

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Right

To select the sound mode from the option menu

1

Press OPTIONS and V/v to select

[Sound Mode], then press .

2

Press V/v to select the sound mode, then press .

To select the preprogrammed music equalizer

Press MUSIC EQ repeatedly during playback.

You can select the sound to suit your preference.

Each time you press the button, the setting changes cyclically as follows.

[Standard] t [Rock] t [Hiphop] t

[Electronica]

You can also select the music equalizer by using the option menu in [Music] sound mode.

Note

The sound mode can be selected only when

[Sound Effect] is set to [Sound Mode On]

(page 48). When [Sound Effect] is set to other

than [Sound Mode On], the sound mode setting does not apply.

Tip

To enjoy 2-channel source such as a CD in multichannel output, we recommend you to select

[Auto].

Selecting the football mode

Press FOOTBALL during playback.

[Football] appears on the TV screen.

You can experience a feeling of presence in the stadium when watching a football match broadcasting.

To turn off the football mode, press

FOOTBALL again to select [Football Off].

The sound mode is changed to the last selected sound mode.

Note

• Depending on the source, the football mode may not work well.

• The football mode will be turned off when you turn off the system.

Tip

You can also select the football mode from the option menu.

25

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Left

Playback

Playing a Disc

For playable discs, see “Playable Discs”

(page 60).

1

Switch the input selector on your TV so that the signal from the system appears on your TV screen.

2

Press Z, and place a disc on the

disc tray.

3

Press Z to close the disc tray.

Playback starts.

If playback does not start automatically, select in the

[Video], [Music], or

[Photo] category, and press .

Enjoying BONUSVIEW/

BD-LIVE

Some BD-ROMs with “BD-LIVE Logo*” have bonus content and other data that can be downloaded for enjoyment.

*

1

Connect the USB device to the

(USB) port (page 28).

For local storage, use a 1 GB or larger

USB memory.

2

Prepare for BD-LIVE (BD-LIVE only).

• Connect the system to a network

(page 21).

• Set [BD Internet Connection] to

[Allow] (page 49).

3

Insert a BD-ROM with

BONUSVIEW/BD-LIVE.

The operation method differs depending on the disc. Refer to the operating instructions of the disc.

Tip

To delete data in the USB memory, select [Delete

BD Data] in [Video], and press . All data stored in the buda folder will be deleted.

26

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Right

Enjoying Blu-ray 3D

You can enjoy Blu-ray 3D Discs with the

3D logo*.

*

1

Prepare for Blu-ray 3D Disc playback.

• Connect the system to your

3D-compatible TV using a High

Speed HDMI cable (page 19).

• Set [3D Output Setting] and [TV

Screen Size Setting for 3D] in

[Screen Settings] (page 46).

2

Insert a Blu-ray 3D Disc.

The operation method differs depending on the disc. Refer to the operating instructions supplied with the disc.

Tip

Refer also to the operating instructions of your

3D-compatible TV.

Displaying the playback information

You can check the playback information, etc., by pressing DISPLAY.

The displayed information differs depending on the disc type and system status.

Example: when playing a BD-ROM

A Output resolution/Video frequency

B Title number or name

C The currently selected audio setting

D Available functions (

angle,

E Playback information

Displays play mode, playing status bar, disc type, video codec, bit rate, repeat type, elapsed time, total playing time

F Chapter number

G The currently selected angle

27

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Left

Playing from a USB

Device

You can play video/music/photo files on a connected USB device.

For playable types of files, see “Playable

Types of Files” (page 61).

1

Connect the USB device to the

(USB) port.

Refer to the operating instructions of the USB device before connecting.

Enjoying music from a

Bluetooth device

About the Bluetooth wireless technology

Bluetooth wireless technology is a shortrange wireless technology that enables wireless data communication between digital devices. Bluetooth wireless technology operates within a range of about

10 meters (33 feet).

You do not need wires to get connected as you do with a USB connection, and you do not need to place the devices face to face as you do with wireless infrared technology.

Bluetooth wireless technology is a global standard supported by thousands of companies. These companies produce products that meet the global standard.

2

Press HOME.

The home menu appears on the TV screen.

3

Press

B/b to select

[Video],

[Music], or [Photo].

4

Press

V/v to select

[USB device], then press .

Note

Do not remove the USB device during operation. To avoid data corruption or damage to the USB device, turn the system off before connecting or removing the USB device.

Supported Bluetooth version and profiles

Profile refers to a standard set of capabilities for various Bluetooth product capabilities. This system supports the following Bluetooth version and profiles.

Supported Bluetooth version:

Bluetooth Specification version 3.0

Supported Bluetooth profiles:

A2DP 1.2 (Advanced Audio Distribution

Profile)

AVRCP 1.3 (Audio Video Remote Control

Profile)

28

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Right

Note

• To be able to use the Bluetooth function, the

Bluetooth device to be connected must support the same profile as this system. Even if the device supports the same profile, the functions may differ depending on the specifications of the Bluetooth device.

• The audio playback on this system may be delayed from that on the Bluetooth device because of the characteristics of the Bluetooth wireless technology.

Pairing this system with a Bluetooth device

Pairing is an operation where Bluetooth devices register with each other beforehand. Once a pairing operation is performed, it does not need to be performed again.

1

Place the Bluetooth device within 1 meter (3.3 feet) from the unit.

2

Press BLUETOOTH.

You can also select [Bluetooth

AUDIO] from [Input] in home menu.

3

Set the Bluetooth device in pairing mode.

For details on setting the Bluetooth device in pairing mode, refer to the operating instructions supplied with the device.

4

Select “BLU-RAY HOME

THEATRE SYSTEM” on the

Bluetooth device display.

Perform this step within 5 minutes, otherwise pairing will be canceled.

Note

If passkey is required on the Bluetooth device, enter “0000”. Passkey may be called

“Passcode”, “PIN code”, “PIN number” or

“Password”.

5

Once pairing is completed, the device is automatically connected to the system.

Device name appears on the TV screen.

Note

You can pair up to 9 Bluetooth devices. If the 10th Bluetooth device is paired, the least recently connected device will be replaced by the new one.

6

Start playback on the Bluetooth device.

7

Adjust the volume.

Adjust the volume of the Bluetooth device first, if the volume level is still too low, adjust the volume level on the unit.

To cancel pairing operation

Press HOME or FUNCTION.

Connecting to a

Bluetooth device from this system

You can connect to a Bluetooth device from this unit.

Check the following before playing music:

– The Bluetooth function of the Bluetooth device is turned on.

– The pairing has been completed

(page 29).

1

Press BLUETOOTH.

Note

To connect to the most recent connected

Bluetooth device, press N. Then proceed to

Step 5.

2

Press OPTIONS.

29

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Left

3

Press

V/v repeatedly to select

[Device List], then press .

A list of paired Bluetooth devices appears.

4

Press

V/v repeatedly to select

the device you want, then press

.

5

Press N to start playback.

6

Adjust the volume.

Adjust the volume of the Bluetooth device first, if the volume level is still too low, adjust the volume level on the unit.

Note

Once the unit and the Bluetooth device are connected, you can control playback by pressing

N, X, x, m/M and ./>.

To disconnect the

Bluetooth device

Press HOME, FUNCTION or RETURN.

To delete a paired Bluetooth device from the device list

1

Follow Steps 1 to 3 above.

2

Press V/v repeatedly to select the device, then press OPTIONS.

3

Press V/v repeatedly to select

[Remove], then press .

4

Follow the on-screen instructions to delete the device using B/V/v/b and

.

Note

While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device.

Connecting to a smartphone by Onetouch listening function

(NFC)

By holding an NFC-compatible smartphone near to the on the unit, the unit and smartphone proceed to complete pairing and the Bluetooth connection automatically.

Compatible smartphones

Smartphones with a built-in NFC function

(OS: Android 2.3.3 – 4.0.x, excluding

Android 3.x)

What is “NFC”?

NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by holding the device near the on the NFC-compatible devices.

1

Download and install the app

“NFC Easy Connect”.

“NFC Easy Connect” is a free app for

Android smartphones that can be obtained on Google Play. Search for the app using the keyword “NFC Easy

Connect” on the site, or access the download site directly by reading the two-dimensional code below.

Note that “NFC Easy Connect” is free but data communication fees when downloading are charged separately.

30

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Right

Two-dimensional code* for direct access

* Use a two-dimensional code reader app.

Note

The app may not be available in some countries/regions.

2

Start the “NFC Easy Connect” app on the smartphone.

Make sure that the application screen is displayed.

3

Hold the smartphone near to the

on the unit until the smartphone vibrates.

Vibration cue is provided when the smartphone is recognized by the unit.

After being recognized by the unit, follow the on-screen instructions displayed on the smartphone, and complete the procedure for Bluetooth connection.

When the Bluetooth connection is established, the blue LED indicator on the front panel stops flashing. The playback time appears in the front panel display.

Note

• The system only can recognizes and connects to one NFC-compatible device at a time.

• Depending on your smartphone, you may need to turn on the NFC function on your smartphone in advance. For details, refer to the operating instructions of the smartphone.

Tip

If pairing and the Bluetooth connection fail, do the following.

– Relaunch “NFC Easy Connect” and move the smartphone slowly over the .

– Remove the case from the smartphone if using a commercially available smartphone case.

To listen to music

Start playback of an audio source on the smartphone. For details on playback operations, refer to the operating instructions of your smartphone.

Tip

If the volume level is low, adjust the volume of the smartphone first. If the volume level is still too low, adjust the volume level on the unit.

To stop playback

The playback will be stopped when you perform any of the following items:

– Hold the smartphone near to the on the unit again.

– Stop the music player of the smartphone.

– Turn off the unit or the smartphone.

– Change the function.

– Disable the Bluetooth function on the smartphone.

31

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Left

Playing via a Network

Enjoying Sony

Entertainment Network

(SEN)

Sony Entertainment Network serves as a gateway delivering selected Internet content and a variety of on-demand entertainment straight to your unit.

Tip

• Some Internet content requires registration via a

PC before it can be played. For further details, visit the following website: http://www.sony.com/blurayhtsupport/

• Some Internet content may not be available in some countries/regions.

1

Prepare for Sony Entertainment

Network.

Connect the system to a network

(page 21).

2

Press SEN.

3

Press

B/V/v/b to select the

Internet content and a variety of on-demand entertainment, then press .

Video streaming control panel

The control panel appears when a video file starts playing. The displayed items may differ depending on the Internet content provider.

To display again, press DISPLAY.

A Control display

Press

B/V/v/b or

for playback operations.

B Playing status bar

Status bar, cursor indicating the current position, playing time, duration of the video file

C Network condition indicator

Indicates signal strength for a wireless connection.

Indicates a wired connection.

D Network transmission speed

E The next video file name

F The currently selected video file name

32

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Right

Playing files on a Home

Network (DLNA)

You can play video/music/photo files on other DLNA-certified equipment by connecting them to your home network.

This unit can be used as a player and renderer.

• Server: Stores and shares digital media contents

• Player: Finds and plays digital media content from the DMS

• Renderer: Receives and plays files from the server, and can be operated by another equipment (controller)

• Controller: Operates the renderer equipment

Server

To play files stored on a

DLNA server via the system

(DLNA Player)

Select the DLNA server icon from

[Video], [Music], or [Photo] in the home menu, then select the file that you want to play.

Server

Player

(This system)

To play remote files by operating the system

(Renderer) via a DLNA controller

You can operate the system with a

DLNA-certified controller (a mobile phone, etc), when playing files stored on a

DLNA server.

Server

Player

(This system) Player

Prepare for using the DLNA function.

• Connect the system to a network

(page 21).

• Prepare other DLNA-certified equipment. For details, refer to the operating instructions of the equipment.

Renderer

(This system)

Controller

For details on operation, refer to the operating instructions of the DLNA controller.

Note

Do not operate the system with the supplied remote control and a DLNA controller at the same time.

Tip

The system is compatible with the “Play To” function of Windows Media

®

Player 12 that comes standard with Windows 7.

33

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Left

Playing the same music in different rooms

(PARTY STREAMING)

You can play the same music at the same time on all Sony equipment which are compatible with the PARTY

STREAMING function and connected to your home network.

Contents in [Music] and the “FM”,

“BT” and “AUDIO” functions can be used with the PARTY STREAMING function.

There are two kinds of PARTY

STREAMING-compatible equipment.

• PARTY host: Plays and sends music.

• PARTY guest: Plays music that is received from PARTY host.

This unit can be used as a PARTY host or

PARTY guest.

PARTY host

(This system)

To use the system as the

PARTY host

Select a track in [Music], a radio station

[Bluetooth AUDIO] in [Input], press OPTIONS. Then select [Start

PARTY] to start.

To close, press OPTIONS, then select

[Close PARTY].

Note

If content that is not compatible with the PARTY

STREAMING function is played, the system closes PARTY automatically.

To use the system as a

PARTY guest

Select [PARTY] in [Music], then select the PARTY host device icon.

To leave the PARTY, press OPTIONS, then select [Leave PARTY].

To close the PARTY, press OPTIONS, then select [Close PARTY].

Note

The sale and product lineup of products that are compatible with the PARTY STREAMING function differ depending on the area.

PARTY guest

PARTY guest

Prepare for PARTY STREAMING.

• Connect the system to a network

(page 21).

• Connect equipment which is compatible with the PARTY STREAMING function.

Searching for video/ music information

You can acquire content information using

Gracenote technology and search for related information.

1

Connect the system to a network

(page 21).

2

Insert a disc with content about which you want to search.

You can perform a video search from a

BD-ROM or DVD-ROM, and a music search from a CD-DA (music CD).

34

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Right

3

Press

B/b to select

[Video] or

[Music].

4

Press

V/v to select

[Video

Search] or [Music Search].

The content information (such as title, cast, track, or artist), [Playback

History] and [Search History] are displayed.

• [Playback History]

Displays a list of previously played

BD-ROM/DVD-ROM/CD-DA

(music CD) titles. Select a title to acquire content information.

• [Search History]

Displays a list of previous searches performed via the [Video Search] or

[Music Search] function.

To search for further related information

Select an item in the lists, then select the service for searches.

Using the TV SideView

TV SideView is a free mobile application for the remote device (smartphone, etc). By using the TV SideView with this system, you can easily enjoy the system by the operation on your remote device.

You can launch a service or application directly from the remote device and view the disc information during the disc playback. The TV SideView also can be used as a remote control and software keyboard.

Before you use the TV SideView device with this system for the first time, be sure to register the TV SideView device.

Follow the on-screen instructions on the

TV SideView device for registration.

Note

The registration will be possible only when home menu appears on the TV screen.

Available Options

Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation.

Common options

[Sound Mode]

Changes the sound mode setting (page 24).

[Football]

Turns on or off the football mode (page 25).

[Repeat Setting]

Sets repeat playback.

[3D Menu]

[Simulated 3D]: Adjusts the simulated 3D effect.

[3D Depth Adjustment]: Adjusts the depth of

3D images.

[2D Playback]: Sets playback to 2D image.

[Play/Stop]

Starts or stops playback.

[Play from beginning]

Plays the item from the beginning.

[Start PARTY]

Starts a party with the selected source.

This item may not appear depending on the source.

[Leave PARTY]

Leaves a party which the system is participating in. The PARTY STREAMING function continues among other participating equipment.

[Close PARTY]

For PARTY host: Closes a party.

For PARTY guest: Closes a party which the system is participating in. The PARTY

STREAMING function ends for all other participating equipment.

[Change Category]

Switches among the [Video], [Music] and [Photo] category in “BD/DVD” (for disc only) or “USB” function. This item only available when the display list is available for the category.

35

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\050PLA.fm

masterpage: Left

[Video] only

[A/V SYNC]

Adjusts the time gap between picture and

sound (page 37).

[3D Output Setting]

Sets whether or not to output 3D video automatically.

[Video Settings]

• [Picture Quality Mode]: Selects the picture settings for different lighting environments.

• [BNR]: Reduces the mosaic-like block noise in the picture.

• [MNR]: Reduces minor noise around the picture outlines (mosquito noise).

[Pause]

Pauses playback.

[Top Menu]

Displays the BD’s or DVD’s Top Menu.

[Menu/Popup Menu]

Displays the BD-ROM’s Pop-up Menu or

DVD’s menu.

[Title Search]

Searches for a title on BD-ROMs/DVD

VIDEOs and starts playback from the beginning.

[Chapter Search]

Searches for a chapter and starts playback from the beginning.

[Audio]

Selects the audio format/track.

[Subtitle]

Selects the subtitle language when multilingual subtitles are recorded on

BD-ROMs/DVD VIDEOs.

[Angle]

Switches the viewing angles when multiangles are recorded on BD-ROMs/DVD

VIDEOs.

[IP Content Noise Reduction]

Adjusts the video quality for Internet content.

[Video Search]

Displays information on the BD-ROM/

DVD-ROM based on Gracenote technology.

[Music] only

[Add Slideshow BGM]

Registers music files in the USB memory as slideshow background music (BGM).

[Music Search]

Displays information on the audio CD

(CD-DA) based on Gracenote technology.

[Photo] only

[Slideshow]

Starts a slideshow.

[Slideshow Speed]

Changes the slideshow speed.

[Slideshow Effect]

Sets the effect when playing a slideshow.

[Slideshow BGM]

• [Off]: Turns off the function.

• [My Music from USB]: Sets the music files registered in [Add Slideshow BGM].

• [Play from Music CD]: Sets the tracks on

CD-DAs (music CDs).

[Change Display]

Switches between [Grid View] and [List

View].

[Rotate Left]

Rotates the photo counterclockwise by

90 degrees.

[Rotate Right]

Rotates the photo clockwise by 90 degrees.

[View Image]

Displays the selected picture.

36

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\060SOU.fm

masterpage: Right

Adjusting the delay between the picture and sound

(A/V SYNC)

When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound for each function separately.

The setting method differs depending on the function.

When other than the “BT” or

“TV” function is selected

1

Press OPTIONS.

The option menu appears on the TV screen.

2

Press

V/v to select [A/V SYNC],

then press .

3

Press

B/b to adjust the delay,

then press .

You can adjust from 0 ms to 300 ms in

25 ms increments.

When the “TV” function is selected

1

Press OPTIONS.

“AV.SYNC” appears in the front panel display.

2

Press

3

Press

V/v to adjust the delay,

then press .

You can adjust from 0 ms to 300 ms in

25 ms increments.

4

Press OPTIONS.

The option menu in the front panel display turns off.

Sound Adjustment

Selecting the Audio

Format, Multilingual

Tracks, or Channel

When the system is playing a BD/DVD

VIDEO recorded in multiple audio formats

(PCM, Dolby Digital, MPEG audio, or

DTS) or multilingual tracks, you can change the audio format or language.

With a CD, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers.

Press AUDIO repeatedly during playback to select the audio signal you want.

The audio information appears on the TV screen.

x BD/DVD VIDEO

Depending on the BD/DVD VIDEO, the option of language varies.

When 4 digits are displayed, they represent

a language code. See “Language Code

List” (page 66). When the same language is

displayed two or more times, the BD/DVD

VIDEO is recorded in multiple audio formats.

x DVD-VR

The types of sound tracks recorded on a disc are displayed.

Example:

• [ Stereo]

• [ Stereo (Audio1)]

• [ Stereo (Audio2)]

• [ Main]

• [ Sub]

• [ Main/Sub]

37

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\070TUN.fm

masterpage: Left

Note

[ Stereo (Audio1)] and [ Stereo (Audio2)] do not appear if only one audio stream is recorded on the disc.

x CD

• [ Stereo]: The standard stereo sound.

• [ 1/L]: The sound of the left channel

(monaural).

• [ 2/R]: The sound of the right channel

(monaural).

• [ L+R]: The sound of both the left and right channels output from each individual speaker.

Enjoying Multiplex

Broadcast Sound

(DUAL MONO)

You can enjoy multiplex broadcast sound when the system receives or plays a Dolby

Digital multiplex broadcast signal.

Note

To receive a Dolby Digital signal, you need to connect a TV or other equipment to the TV

(DIGITAL IN OPTICAL) jack with a optical

digital cord (pages 19, 20).

If your TV’s HDMI IN jack is compatible with

the Audio Return Channel function (pages 19,

50), you can receive a Dolby Digital signal via an

HDMI cable.

Press AUDIO repeatedly until the signal you want appears in the front panel display.

• “MAIN”: Sound of the main language will be output.

• “SUB”: Sound of the sub language will be output.

• “MN/SUB”: Mixed sound of both the main and sub languages will be output.

Tuner

Listening to the Radio

1

Press FUNCTION repeatedly until “FM” appears in the front panel display.

2

Select the radio station.

Automatic tuning

Hold down TUNING +/– until the auto scanning starts.

[Auto Tuning] appears on the TV screen. Scanning stops when the system tunes in a station.

To cancel automatic tuning, press any buttons.

Manual tuning

Press TUNING +/– repeatedly.

3

Press VOL +/– repeatedly to adjust the volume.

If an FM program is noisy

If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve.

1

Press OPTIONS.

The option menu appears on the TV screen.

2

Press

V/v to select [FM Mode],

then press .

3

Press

V/v to select [Monaural],

then press .

• [Stereo]: Stereo reception.

• [Monaural]: Monaural reception.

Tip

You can set [FM Mode] for each preset station separately.

38

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\070TUN.fm

masterpage: Right

To turn off the radio

Press "/1.

Presetting radio stations

You can preset up to 20 stations. Before tuning, make sure to turn down the volume to minimum.

1

Press FUNCTION repeatedly until “FM” appears in the front panel display.

2

Hold down TUNING +/– until the auto scanning starts.

Scanning stops when the system tunes in a station.

3

Press OPTIONS.

The option menu appears on the TV screen.

4

Press

V/v to select [Preset

Memory], then press .

5

Press

V/v to select the preset

number you want, then press .

6

Repeat Steps 2 to 5 to store other stations.

To change a preset number

Select the preset number you want by pressing PRESET +/–, then perform the procedure from Step 3.

Selecting a preset station

1

Press FUNCTION repeatedly until “FM” appears in the front panel display.

The last received station is tuned in.

2

Press PRESET +/– repeatedly to select the preset station.

The preset number and frequency appear on the TV screen and front panel display.

Each time you press the button, the system tunes in one preset station.

Tip

• You can select the preset station number directly by pressing the number buttons.

• Each time you press DISPLAY, the display in the front panel display changes cyclically as follows:

Frequency t Preset number t Decoding status*

* Appears when [Sound Effect] is set to

[Dolby Pro Logic], [DTS Neo:6

Cinema], or [DTS Neo:6 Music]

(page 48).

39

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\080OTH.fm

masterpage: Left

Other Operations

Using the Control for

HDMI Function for

“BRAVIA” Sync

This function is available on TVs with the

“BRAVIA” Sync function.

By connecting Sony equipment that is compatible with the Control for HDMI function via an HDMI cable, operation is simplified.

Note

To use the “BRAVIA” Sync function, be sure to turn on the system and all connected equipment after completed the HDMI connection.

Control for HDMI - Easy

Setting

You can set the system’s [Control for

HDMI] function automatically by enabling the corresponding setting on the TV.

For details about the Control for HDMI

function, see “[HDMI Settings]” (page 50)

System Power Off

You can turn the system off in sync with the

TV.

Note

The system does not turn off automatically while playing music or when “FM” function is selected.

One-Touch Play

When you press N on the remote control, the system and TV turn on, and the TV’s input is switched to the HDMI input which the system is connected.

System Audio Control

You can enjoy the sound from TV or other equipment by a simple operation.

You can use the System Audio Control function as follows:

• When the system is turned on, the sound of the TV or other equipment can be output from the speakers of the system.

• When sound from the TV or other equipment is output via the speakers of the system, you can switch the sound to output from the TV speakers by pressing

SPEAKERS TV yAUDIO.

• When sound from the TV or other equipment is output via the speakers of the system, you can adjust the volume and turn off the sound of the system by operating the TV.

Audio Return Channel

You can enjoy TV sound via the system by using just one HDMI cable. For details of

the setting, see “[Audio Return Channel]”

(page 50).

Language Follow

When you change the language for the on-screen display of the TV, the system’s on-screen display language is also changed after turning off and on the system.

Setting the Speakers

[Speaker Settings]

To obtain optimum surround sound, set the speakers’ distance from your listening position. Then use the test tone to adjust the balance of the speakers.

1

Press HOME.

The home menu appears on the TV screen.

40

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\080OTH.fm

masterpage: Right

2

Press

B/b to select

[Setup].

3

Press

V/v to select [Audio

Settings], then press .

4

Press

V/v to select [Speaker

Settings], then press .

The [Select speaker layout.] display appears.

5

Press

V/v to select setting

according to your speakers placement, then press .

• [Standard]: The surround speakers are installed in the rear position.

• [All Front]: All speakers are installed in the front position.

Note

The [Distance] and [Level] settings are reset to default settings each time you change the speaker layout setting.

6

Press

V/v to select the item, then

press .

7

Press

V/v to adjust the

parameter.

8

Press

B/b and

to confirm the settings.

Check the following settings.

x [Distance]

Be sure to set the parameters of the distance from the listening position to the speakers.

You can set the parameters from 0 to

23 feet (0.0 to 7.0 meters).

[Front Left/Right] 10 ft/3.0 m: Set the front speaker distance.

[Center] 10 ft/3.0 m: Set the center speaker distance.

[Surround Left/Right] 10 ft/3.0 m: Set the surround speaker distance.

[Subwoofer] 10 ft/3.0 m: Set the subwoofer distance.

Tip

You can change the unit of measurement (feet or meters) by pressing the color button (RED).

x [Level]

You can adjust the sound level of the speakers. You can set the parameters from

–6.0 dB to +6.0 dB. Be sure to set [Test

Tone] to [On] for easy adjustment.

[Front Left/Right] 0.0 dB: Set the front speaker level.

[Center] 0.0 dB: Set the center speaker level.

[Surround Left/Right] 0.0 dB: Set the surround speaker level.

[Subwoofer] 0.0 dB: Set the subwoofer level.

x [Test Tone]

The speakers will emit a test tone to adjust

[Level].

[Off]: The test tone is not emitted from the speakers.

[On]: The test tone is emitted from each speaker in sequence while adjusting level.

When you select one of the [Speaker

Settings] items, the test tone is emitted from each speaker in sequence.

Adjust the sound level as follows.

1

Set [Test Tone] to [On].

2

Press V/v to select [Level], then press .

3

Press

V/v to select the speaker type you want, then press .

4

Press B/b to select the left or right speaker, then press V/v to adjust the level.

5

Press .

6

Repeat Steps 3 to 5.

41

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\080OTH.fm

masterpage: Left

7

Press RETURN.

The system returns to the previous display.

8

Press

V/v to select [Test Tone], then press .

9

Press V/v to select [Off], then press

.

Note

The test tone signals are not output from the

HDMI (OUT) jack.

Tip

To adjust the volume of all the speakers at one time, press VOL +/–.

Deactivating the

Buttons on the Unit

(Child Lock)

You can deactivate the buttons on the unit

(except for "/1) for preventing misoperation, such as child mischief.

Hold down x on the unit for more

than 5 seconds.

“LOCKED” appears in the front panel display.

The child lock function is activated and the buttons on the unit are locked. (You can operate the system by using the remote control.)

To cancel, hold down x for more than

5 seconds until “UNLOCK” appears in the front panel display.

Note

If you operate the buttons on the unit while the child lock function is on, “LOCKED” flashes in the front panel display.

Using the Sleep Timer

You can set the system to turn off at a preset time, so you can fall asleep listening to music. The time can be preset in intervals of 10 minutes.

Press SLEEP.

Each time you press SLEEP, the minutes display (the remaining time) in the front panel display changes by 10 minutes.

When you set the sleep timer, the remaining time appears every 5 minutes.

When the remaining time is less than

2 minutes, “SLEEP” flashes in the front panel display.

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly.

Controlling Your TV with the Supplied

Remote Control

By adjusting the remote control signal, you can control your TV with the supplied remote control.

Note

When you replace the batteries of the remote control, the code number may reset to the default

(SONY) setting. Set the appropriate code number again.

42

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\080OTH.fm

masterpage: Right

Preparing the remote control for controlling the TV

While holding down TV "/1, press

number buttons to enter your TV’s manufacturer’s code (see the table).

Then release TV "/1.

Manufacturer

SONY

LG

PANASONIC

SAMSUNG

SHARP

TOSHIBA

VIZIO

Code number

01 (default)

02

05

02, 06

03

04

07

If the setting is unsuccessful, the currently registered code is not changed. Re-enter the code number.

If more than one code number is listed, try entering them one at a time until you find the code that works with your TV.

Saving Power in

Standby Mode

Check that you have made the following settings:

– [Control for HDMI] in [HDMI Settings]

is set to [Off] (page 50).

– [Quick Start Mode] is set to [Off]

(page 50).

– [Remote Start] in [Network Settings] is

set to [Off] (page 51).

Browsing Websites

1

Prepare for Internet browsing.

Connect the system to a network

(page 21).

2

Press HOME.

The home menu appears on the TV screen.

3

Press

B/b to select

[Network].

4

Press

V/v to select [Internet

Browser], then press .

The [Internet Browser] display appears.

Note

Some websites may not display correctly, or not function.

To enter a URL

Select [URL entry] from the options menu.

Enter the URL using the software keyboard, then select [Enter].

To set the default start page

While the page you want to set is displayed, select [Set as start page] from the options menu.

To return to the previous page

Select [Previous page] from the options menu.

When the previous page does not appear even if you select [Previous page], select

[Window List] from the options menu and select the page you want to return to from the list.

To quit Internet Browser

Press HOME.

43

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\080OTH.fm

masterpage: Left

Internet Browser display

You can check website information by pressing DISPLAY. The display information differs depending on the website and page status.

A Page title

B Page address

C Cursor

Move by pressing

B/V/v/b. Place the cursor on the link you want to view, then press . The linked website is displayed.

D SSL icon

Appears when the linked URL is secured.

E Signal strength indicator

Appears when the system is connected to a wireless network.

F Progress bar/Loading icon

Appears when the page is being read, or during file download/transfer.

G Text input field

Press , then choose [Input] from the options menu to open the software keyboard.

H Scroll bar

Press B/V/v/b to move the page display left, up, down, or right.

Available options

Various settings and operations are available by pressing OPTIONS.

The available items differ depending on the situation.

[Browser Setup]

Displays the Internet Browser settings.

• [Zoom]: Increases or decreases the size of the displayed contents.

• [JavaScript Setup]: Sets whether to enable or disable JavaScript.

• [Cookie Setup]: Sets whether or not to accept browser cookies.

• [SSL Alarm Display]: Sets whether to enable or disable SSL.

[Window List]

Displays a list of all current opened websites.

Allows you to return to a previous displayed website by selecting the window.

[Bookmark List]

Displays the bookmark list.

[URL entry]

Allows you to enter a URL when the software keyboard is displayed.

[Previous page]

Moves to a previous displayed page.

[Next page]

Moves to the previous displayed next page.

[Cancel loading]

Stops loading a page.

[Reload]

Reloads the same page.

[Add to Bookmark]

Adds the current displayed website to the bookmark list.

[Set as start page]

Sets the current displayed website as the default start page.

[Open in new window]

Opens a link in a new window.

[Character encoding]

Sets the character encoding system.

44

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\090SET.fm

masterpage: Right

[Display certificate]

Displays server certificates sent from pages that support SSL.

[Input]

Displays the software keyboard to enter characters while browsing a website.

[Break]

Moves the cursor to the next line in the text input field.

[Delete]

Erases one character on the left side of the cursor during text input.

Settings and Adjustments

Using the Setup Display

You can make various adjustments to items such as picture and sound.

The default settings are underlined.

Note

Playback settings stored in the disc take priority over the Setup Display settings. Therefore, some of the functions may not be performed.

1

Press HOME.

The home menu appears on the TV screen.

2

Press

B/b to select

[Setup].

3

Press

V/v to select the setup

category icon, then press .

Icon Explanation

[Network Update]

(page 46)

Updates the software of the system.

[Screen Settings]

(page 46)

Makes the screen settings according to the type of

TV.

[Audio Settings]

(page 48)

Makes the audio settings according to the type of connecting jacks.

[BD/DVD Viewing

Settings] (page 49)

Makes detailed settings for

BD/DVD playback.

45

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\090SET.fm

masterpage: Left

Icon Explanation

[Parental Control

Settings] (page 49)

Makes detailed settings for the Parental Control function.

[System Settings]

(page 50)

Makes the system-related settings.

[Network Settings]

(page 51)

Makes detailed settings for

Internet and network.

[Easy Network Settings]

(page 52)

Runs [Easy Network

Settings] to make the basic network settings.

[Resetting] (page 52)

Resets the system to the factory settings.

[Screen Settings]

x [3D Output Setting]

[Auto]: Normally select this.

[Off]: Select this to display all contents in

2D.

x [TV Screen Size Setting for 3D]

Sets the screen size of your 3D-compatible

TV.

x [TV Type]

[16:9]: Select this when connecting to a wide-screen TV or a TV with a wide-mode function.

[4:3]: Select this when connecting to a 4:3 screen TV without a wide-mode function.

[Network Update]

By updating your software to the latest version, you can take advantage of the newest functions.

For information about update functions, refer to the following website: http://www.sony.com/blurayhtsupport/

During a software update, “UPDATE” appears in the front panel display. After the update completes, the unit automatically turns off.

While the updating operation is in progress, do not turn on or off the unit, or operate the unit or TV. Wait for the software update to complete.

x [Screen Format]

[Full]: Select this when connecting to a TV with a wide-mode function. Displays a 4:3 screen picture in 16:9 aspect ratio even on a wide-screen TV.

[Normal]: Changes the picture size to fit the screen size with the original picture aspect ratio.

46

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\090SET.fm

masterpage: Right x [DVD Aspect Ratio]

[Letter Box]: Displays a wide picture with black bands on the top and bottom.

[Pan & Scan]: Displays a full-height picture on the entire screen, with trimmed sides.

x [BD-ROM 24p Output]

[Auto]: Outputs 24p video signals only when you connect a 1080/24p-compatible

TV via an HDMI connection and the

[Output Video Resolution] is set to [Auto] or [1080p].

[On]: Select this when your TV is compatible with 1080/24p video signals.

[Off]: Select this when your TV is not compatible with 1080/24p video signals.

x [DVD-ROM 24p Output]

[Auto]: Outputs 24p video signals only when you connect a 1080/24p-compatible

TV via an HDMI connection and the

[Output Video Resolution] is set to [Auto] or [1080p].

[Off]: Select this when your TV is not compatible with 1080/24p video signals.

x [Cinema Conversion Mode]

[Auto]: Normally select this. The unit automatically detects whether the material is video-based or film-based, and switches to the appropriate conversion method.

[Video]: The conversion method suited for video-based material will always be selected regardless of the material.

x [Output Video Resolution]

[Auto]: Outputs video signal according to the resolution of the TV or connected equipment.

[Original Resolution]: Outputs video signal according to the resolution recorded on the disc. (When the resolution is lower than SD resolution, it is scaled up to SD resolution.)

[480i/576i]*, [480p/576p]*, [720p],

[1080i], [1080p]: Outputs video signal according to the selected resolution setting.

* If the color system of your disc is NTSC, the video signals resolution can be converted to

[480i] and [480p] only.

x [YCbCr/RGB (HDMI)]

[Auto]: Automatically detects the type of external equipment, and switches to the matching color setting.

[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video signals.

[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video signals.

[RGB]: Select this when connecting to an equipment with an HDCP compliant DVI jack.

x [HDMI Deep Color Output]

[Auto]: Normally select this.

[16bit], [12bit], [10bit]: Outputs 16bit/

12bit/10bit video signals when the connected TV is compatible with Deep

Color.

[Off]: Select this when the picture is unstable or colors appear unnatural.

47

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\090SET.fm

masterpage: Left x [Pause Mode] (BD/DVD VIDEO/

DVD-R/DVD-RW only)

[Auto]: The picture, including subjects that move dynamically, is output with no jitter.

Normally select this position.

[Frame]: The picture, including subjects that do not move dynamically, is output in high resolution.

[Audio Settings]

x [BD Audio MIX Setting]

[On]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio.

[Off]: Outputs the primary audio only.

x [Audio Output]

You can select the output method where the audio signal is output.

[Speaker]: Outputs multi-channel sound from the system’s speakers only.

[Speaker + HDMI]: Outputs multi-channel sound from the system’s speakers and

2-channel linear PCM signals from the

HDMI (OUT) jack.

[HDMI]: Outputs sound from the HDMI

(OUT) jack only. Sound format depends on the connected equipment.

Note

• When [Control for HDMI] is set to [On]

(page 50), [Audio Output] is set to [Speaker +

HDMI] automatically and this setting cannot be changed.

• When [Audio Output] is set to [HDMI], the output signal format for the “TV” function is

2-channel linear PCM.

x [Audio DRC]

You can compress the dynamic range of the sound track.

[Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only).

[On]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended.

[Off]: No compression of dynamic range.

x [Attenuate - AUDIO]

Distortion may occur when you listen to an equipment connected to the AUDIO IN

(L/R) jacks. You can prevent distortion by attenuating the input level on the unit.

[On]: Attenuates the input level. The output level will decrease at this setting.

[Off]: Normal input level.

x [Sound Effect]

You can turn on or off the system’s sound

effects (SOUND MODE setting (page 24)).

For a 2-channel source, you can select

[Dolby Pro Logic], [DTS Neo:6 Cinema], or [DTS Neo:6 Music] to simulate surround sound.

[Sound Mode On]: Enables the surround

effect of the sound mode (page 24) and

Football mode (page 25).

[Dolby Pro Logic]: The system simulates surround sound from 2-channel sources and outputs sound from all speakers

(5.1 channel) (Dolby Pro Logic decoding).

[DTS Neo:6 Cinema]/[DTS Neo:6 Music]:

The system simulates surround sound from

2-channel sources and produces multichannel sound (DTS Neo:6 Cinema/DTS

Neo:6 Music mode decoding).

[2ch Stereo]: This system outputs the sound from the front left/right speakers and subwoofer only. Multi-channel surround formats are downmixed to 2-channel.

48

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\090SET.fm

masterpage: Right

[Off]: The sound effects are disabled. You can hear sound as it is recorded.

x [Speaker Settings]

To obtain optimum surround sound, set the

speakers. For details, see “Setting the

Speakers” (page 40).

x [Subtitle Language]

You can select the default subtitle language for BD-ROMs or DVD VIDEOs.

When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language

by referring to “Language Code List”

(page 66).

x [Bluetooth AUDIO - AAC]

You can enable and disable AAC audio.

[On]: AAC audio if the Bluetooth device supports AAC.

[Off]: SBC audio.

Note

You can enjoy high quality sound if the AAC is enabled. In case you cannot listen to AAC sound from your device, select [Off].

x [BD Hybrid Disc Playback Layer]

[BD]: Plays BD layer.

[DVD/CD]: Plays DVD or CD layer.

x [BD Internet Connection]

[Allow]: Normally select this.

[Do not allow]: Prohibits Internet connection.

[BD/DVD Viewing

Settings]

[Parental Control

Settings]

x [BD/DVD Menu Language]

You can select the default menu language for BD-ROMs or DVD VIDEOs.

When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language

by referring to “Language Code List”

(page 66).

x [Audio Language]

You can select the default track language for BD-ROMs or DVD VIDEOs.

When you select [Original], the language given priority in the disc is selected.

When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language

by referring to “Language Code List”

(page 66).

x [Password]

Set or change the password for the Parental

Control function. A password allows you to set a restriction on BD-ROM, DVD

VIDEO, or Internet video playback. If necessary, you can differentiate the restriction levels for BD-ROMs and DVD

VIDEOs.

x [Parental Control Area Code]

Playback of some BD-ROMs or DVD

VIDEOs can be limited according to the geographic area. Scenes may be blocked or replaced with different scenes. Follow the on-screen instructions and enter your fourdigit password.

49

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\090SET.fm

masterpage: Left x [BD Parental Control]/[DVD

Parental Control]/[Internet Video

Parental Control]

By setting Parental Control, scenes can be blocked or replaced with different scenes.

Follow the on-screen instructions and enter your four-digit password.

[Audio Return Channel]

This function is available when you connect the system to a TV’s HDMI IN jack that is compatible with the Audio

Return Channel function and [Control for

HDMI] is set to [On].

[Auto]: The system can receive the digital audio signal of the TV automatically via an

HDMI cable.

[Off]: Off.

x [Internet Video Unrated]

[Allow]: Allows the playback of unrated

Internet videos.

[Block]: Blocks the playback of unrated

Internet videos.

x [Quick Start Mode]

[On]: Shortens the startup time from standby mode. You can operate the system quickly after turning it on.

[Off]: The default setting.

[System Settings]

x [OSD Language]

You can select the language you want for the system on-screen display.

x [Auto Display]

[On]: Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc.

[Off]: Displays information only when you press DISPLAY.

x [Main Unit illumination]

[On]: The front panel display is always turned on and the brightness of the LED indicator is the maximum.

[Auto]: The front panel display is turned off and the brightness of LED indicator is reduced automatically if you do not operate the system for about 10 seconds.

x [Screen Saver]

[On]: Turns on the screen saver function.

[Off]: Off.

x [Software Update Notification]

[On]: Sets the system to inform you of latest software version information

(page 46).

[Off]: Off.

x [HDMI Settings]

[Control for HDMI]

[On]: Turns on the [Control for HDMI] function. You can operate mutually between equipment that are connected with an HDMI cable.

[Off]: Off.

x [Gracenote Settings]

[Auto]: Automatically downloads disc information when you stop playback of the disc. To download, the system must be connected to the network.

[Manual]: Downloads disc information when [Video Search] or [Music Search] is selected.

50

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\090SET.fm

masterpage: Right x [System Information]

You can display the system’s software version information and the MAC address.

x [Software License Information]

You can display the Software License

Information.

[Network Settings]

x [Renderer Options]

[Auto Access Permission]: Sets whether or not to allow automatic access from a newly detected DLNA controller.

[Smart Select]: Allows a Sony DLNA controller to find the system as the target equipment to operate by using the infrared ray. You can set this function to on or off.

[Renderer Name]: Displays the system’s name as it is listed on other DLNA devices on the network.

x [Renderer Access Control]

Sets whether or not to accept commands from DLNA controllers.

x [Internet Settings]

Connect the system to the network

beforehand. For details, see “Step 3:

Preparing for Network Connection”

(page 21).

[Wired Setup]: Select this when you connect to a broadband router using a LAN cable.

[Wireless Setup(built-in)]: Select this when you use the built-in wireless LAN of the system for wireless network connection.

Tip

For further details, visit the following website and check the FAQ: http://www.sony.com/blurayhtsupport/ x [PARTY Auto Start]

[On]: Starts a PARTY or joins an existing

PARTY at the request of a networked device compatible with the PARTY

STREAMING function.

[Off]: Off.

x [Registered Remote Devices]

Displays a list of your registered remote devices.

Note

To use this function, be sure to perform the

software update (page 46).

x [Network Connection Status]

Displays the current network connection status.

x [Network Connection

Diagnostics]

You can run the network diagnostic to check if the network connection has been made properly.

x [Remote Start]

[On]: Allows turn on the system by a device linked via network when the system is in standby mode.

[Off]: The system cannot be turned on by a device linked via network.

x [Connection Server Settings]

Sets whether or not to display the connected DLNA server.

51

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Left

[Easy Network

Settings]

Runs [Easy Network Settings] to make the basic network settings. Follow the onscreen instructions.

[Resetting]

x [Reset to Factory Default Settings]

You can reset the system settings to the factory default by selecting the group of settings. All the settings within the group will be reset.

x [Initialize Personal Information]

You can erase your personal information stored in the system.

Additional Information

Precautions

On safety

• Should any solid object or liquid fall into the cabinet, unplug the system and have it checked by qualified personnel before operating it any further.

• Do not touch the AC power cord (mains lead) with wet hands. Doing so may cause an electric shock.

On power sources

If you are not going to use the system for a long time, be sure to disconnect the system from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.

On placement

• Place the system in a location with adequate ventilation to prevent heat build-up in the system.

• Although the unit heats up during operation, this is not a malfunction. If you continuously use this unit at a large volume, the cabinet temperature of the top, side and bottom rises considerably.

To avoid burning yourself, do not touch the cabinet.

• Do not place the unit on a soft surface

(rugs, blankets, etc.) that might block the ventilation holes.

• Do not install the system near heat sources such as radiators, air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock.

• Do not install the system in an inclined position. It is designed to be operated in a horizontal position only.

52

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right

• Keep the system and discs away from components with strong magnets, such as microwave ovens, or large loudspeakers.

• Do not place heavy objects on the system.

• Do not place metal objects in front of the front panel. It may limit reception of radio waves.

• Do not place the system in a place where medical equipment is in use. It may cause a malfunction of medical equipment.

• If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless LAN function.

On operation

If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the unit. Should this occur, the system may not operate properly. In this case, remove the disc and leave the system turned on for about half an hour until the moisture evaporates.

On adjusting volume

Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is suddenly played.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

On cleaning discs, disc/lens cleaners

Do not use cleaning discs or disc/lens cleaners (including wet or spray types).

These may cause the apparatus to malfunction.

On replacement of parts

In the events that this system is repaired, repaired parts may be retained for reuse or recycling purposes.

On your TV’s color

If the speakers cause the color irregularity on your TV screen, turn off the TV then turn it on after 15 to 30 minutes. If color irregularity persist, place the speakers further away from the TV set.

IMPORTANT NOTICE

Caution: This system is capable of holding a still video image or on-screen display image on your TV screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time, you risk permanent damage to your TV screen. Plasma display panel televisions and projection televisions are especially susceptible to this.

On moving the system

Before moving the system, make sure that there is no disc inserted, and disconnect the

AC power cord (mains lead) from the wall outlet (mains).

53

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Left

On Bluetooth communication

Bluetooth devices should be used within approximately 10 meters (33 feet)

(unobstructed distance) of each other.

The effective communication range may become shorter under the following conditions.

– When a person, metal object, wall or other obstruction is between the devices with a Bluetooth connection

– Locations where a wireless LAN is installed

– Around microwave ovens that are in use

– Locations where other electromagnetic waves occur

Bluetooth devices and wireless LAN

(IEEE 802.11b/g) use the same frequency band (2.4 GHz). When using your

Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies:

– Use this unit at least 10 meters (33 feet) away from the wireless LAN device.

– Turn off the power to the wireless LAN equipment when using your Bluetooth device within 10 meters (33 feet).

– Install this unit and Bluetooth device as closer to each other as possible.

• The radio waves broadcast by this unit may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this unit and Bluetooth device in the following locations:

– In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gasses may be present

– Near automatic doors or fire alarms

• This unit supports security functions that comply with the Bluetooth specification to ensure secure connection during communication using Bluetooth technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology.

• Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology.

Bluetooth communication is not necessarily guaranteed with all Bluetooth devices that have the same profile as this unit.

Bluetooth devices connected with this unit must comply with the Bluetooth specification prescribed by the Bluetooth

SIG, Inc., and must be certified to comply. However, even when a device complies with the Bluetooth specification, there may be cases where the characteristics or specifications of the

Bluetooth device make it impossible to connect, or may result in different control methods, display or operation.

• Noise may occur or the audio may cut off depending on the Bluetooth device connected with this unit, the communications environment, or surrounding conditions.

If you have any questions or problems concerning your system, please consult your nearest Sony dealer.

54

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right

Notes about Discs

On handling discs

• To keep the disc clean, handle the disc by its edge. Do not touch the surface.

• Do not stick paper or tape on the disc.

Troubleshooting

If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest

Sony dealer.

• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.

• After playing, store the disc in its case.

On cleaning

• Before playing, clean the disc with a cleaning cloth.

Wipe the disc from the center out.

• Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl

LPs.

This system can only play a standard circular disc. Using neither standard nor circular discs (e.g., card, heart, or star shape) may cause a malfunction.

Do not use a disc that has a commercially available accessory attached, such as a label or ring.

General

The power does not turn on.

t Check that the AC power cord (mains lead) is connected securely.

The remote control does not function.

t The distance between the remote control and the unit is too far.

t The batteries in the remote control are weak.

The disc tray does not open and you cannot remove the disc even after you

press Z.

t Try the following:

1

Hold down N and Z on the unit for more than 5 seconds to open the disc tray.

2 Remove the disc.

3

Disconnect the AC power cord

(mains lead) from the wall outlet

(mains), then reconnect after several minutes.

The system does not work normally.

t Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes.

55

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Left

Messages

[A new software version is available.

Please go to the “Setup” section of the menu and select “Network

Update” to perform the update.] appears on the TV screen.

t See [Network Update] (page 46) to

update the system to a latest software version.

“PRTECT”, “PUSH” and “POWER” appear alternately in the front panel display.

t Press "/1 to turn off the system, and check the following items after

“STBY” disappears.

• Are you using only the supplied speakers?

• Is anything blocking the ventilation holes of the system?

• After checking the above items and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer.

“LOCKED” appears in the front panel display.

t Set the child lock function to off

(page 42).

“D. LOCK” appears in the front panel display.

t Contact your nearest Sony dealer or local authorized Sony service facility.

“Exxxx” (x is a number) appears in the front panel display.

t Contact your nearest Sony dealer or local authorized Sony service facility and give the error code.

appears without any messages on the entire TV screen.

t Contact your nearest Sony dealer or local authorized Sony service facility.

Picture

There is no picture or the picture is not output correctly.

t Check the output method on your

system (page 19).

t Hold down N and VOL – on the unit for more than 5 seconds to reset the video output resolution to the lowest resolution.

t For BD-ROMs, check the [BD-ROM

24p Output] settings in [Screen

Settings] (page 47).

There is no picture when you make an

HDMI cable connection.

t The unit is connected to an input device that is not HDCP (Highbandwidth Digital Content Protection) compliant (“HDMI” in the front panel

does not light up) (page 19).

The dark area of the picture is too dark/the bright area is too bright or unnatural.

t Set [Picture Quality Mode] to

[Standard] (default) (page 36).

Picture noise appears.

t Clean the disc.

t If the picture output from your system goes through your equipment to get to your TV, the copy-protection signal applied to some BD/DVD programs could affect picture quality. If you still experience problems even when you connect your unit directly to your TV, try connecting your unit to the other input jacks.

56

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right

An image is not displayed on the entire TV screen.

t Check the setting of [TV Type] in

[Screen Settings] (page 46).

t The aspect ratio on the disc is fixed.

Color irregularity occurs on the TV screen.

t If the speakers are used with a CRTbased TV or projector, install the speakers at least 0.3 meters (1 foot) from the TV set.

t If the color irregularity persists, turn off the TV set once, then turn it on after

15 to 30 minutes.

t Make sure that no magnetic object

(magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers.

Sound

There is no sound.

t The speaker cords are not connected securely.

t Check the speaker settings (page 40).

There is no sound from the TV via the

HDMI (OUT) jack when using the

Audio Return Channel function.

t Set [Control for HDMI] in [HDMI

Settings] of [System Settings] to [On]

(page 50). Also, set [Audio Return

Channel] in [HDMI Settings] of

[System Settings] to [Auto] (page 50).

t Make sure that your TV is compatible with the Audio Return Channel function.

t Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return

Channel function.

The system does not output sound of

TV programs correctly when connected to a set-top box.

t Set [Audio Return Channel] in [HDMI

Settings] of [System Settings] to [Off]

(page 50).

t Check the connections (page 20).

Severe hum or noise is heard.

t Move your audio equipment away from the TV.

t Clean the disc.

The sound loses stereo effect when you play a CD.

t Select stereo sound by pressing

AUDIO (page 37).

The sound outputs from the center speaker only.

t Depending on the disc, the sound may output from the center speaker only.

No sound or only a very low-level sound is heard from the surround speakers.

t Check the speaker connections and

settings (pages 18, 40).

t Check the sound mode setting

(page 24).

t Depending on the source, the effect of the surround speakers may be less noticeable.

t A 2-channel source is being played.

Distortion occurs in the sound of a connected equipment.

t Reduce the input level for the connected equipment by setting

[Attenuate - AUDIO] (page 48).

A sudden loud music is heard.

t The build-in sound demonstration is activated. Press VOL – to reduce the volume or press x to stop the demonstration.

57

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Left

Tuner

Radio stations cannot be tuned in.

t Check that the antenna (aerial) is connected securely. Adjust the antenna

(aerial).

t The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning.

Playback

The disc does not play.

t The region code on the BD/DVD does not match the system.

t Moisture has condensed inside the unit and may cause damage to the lenses.

Remove the disc and leave the unit turned on for about half an hour.

t The system cannot play a recorded disc that is not correctly finalized

(page 60).

File names are not displayed correctly.

t The system can only display ISO

8859-1 compliant character formats.

Other character formats may be displayed differently.

t Depending on the writing software used, the input characters may be displayed differently.

A disc does not start playing from the beginning.

t Resume play has been selected. Press

OPTIONS and select [Play from beginning], then press .

Playback does not start from the resume point where you last stopped playing.

t The resume point may be cleared from memory depending on the disc when

• you open the disc tray.

• you disconnect the USB device.

• you play other content.

• you turn off the unit.

The language for the soundtrack/ subtitle or angles cannot be changed.

t Try using the BD’s or DVD’s menu.

t Multi-lingual tracks/subtitles or multiangles are not recorded on the BD or

DVD being played.

Bonus contents or other data that are contained in a BD-ROM cannot be played.

t Try the following:

1

Remove the disc.

2

Turn the system off.

3

Remove and reconnect the USB

device (page 28).

4

Turn the system on.

5

Insert the BD-ROM with

BONUSVIEW/BD-LIVE.

USB device

The USB device is not recognized.

t Try the following:

1

Turn the system off.

2

Remove and reconnect the USB device.

3

Turn the system on.

t Make sure that the USB device is securely connected to the (USB) port.

t Check if the USB device or a cable is damaged.

t Check if the USB device is on.

58

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right t If the USB device is connected via a

USB hub, disconnect it and connect the USB device directly to the unit.

• The connected equipment’s setting for the [Control for HDMI] function is correct.

BRAVIA Internet Video

The picture/sound is poor/certain programs display with a loss of detail, especially during fast-motion or dark scenes.

t Picture/sound quality may be poor depending on Internet content providers.

t Picture/sound quality may be improved by changing the connection speed. Sony recommends a connection speed of at least 2.5 Mbps for standarddefinition video and 10 Mbps for highdefinition video.

t Not all videos contain sound.

The picture is small.

t Press V to zoom in.

“BRAVIA” Sync

([Control for HDMI])

The [Control for HDMI] function does not work (“BRAVIA” Sync).

t Check that [Control for HDMI] is set

to [On] (page 50).

t If you change the HDMI connection, turn the system off and on again. t If power failure occurs, set [Control for HDMI] to [Off], then set [Control

for HDMI] to [On] (page 50).

t Check the following and refer to the operating instructions supplied with the equipment.

• The connected equipment is compatible with the [Control for

HDMI] function.

Network connection

The system cannot connect to the network.

t Check the network connection

(page 21) and the network settings

(page 51).

Wireless LAN connection

You cannot connect your PC to the

Internet after [Wi-Fi Protected Setup

(WPS)] is performed.

t The wireless settings of the router may change automatically if you use the

Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly.

The system cannot connect to the network or the network connection is unstable.

t Check if the wireless LAN router is on.

t Check the network connection

(page 21) and the network settings

(page 51).

t Depending on the usage environment, including the wall material, radio wave reception conditions, or obstacles between the system and the wireless

LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other.

59

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Left t Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt communication. Move the unit away from such devices, or turn off such devices.

t The wireless LAN connection may be unstable depending on the usage environment, especially while using the Bluetooth function of the system.

In this case, adjust the usage environment.

The wireless router you want is not shown in the wireless network list.

t Press RETURN to return to the previous screen, and try [Wireless

Setup(built-in)] again. If the wireless router you want is still not detected, select [Add a new address.] from the network list, then select [Manual

Registration] to input a network name

(SSID) manually.

Bluetooth device

Pairing cannot be done.

t Move the Bluetooth device closer to the unit.

t Pairing may not be possible if other

Bluetooth devices are present around the unit. In this case, turn off the other

Bluetooth devices.

t Delete the system from your Bluetooth device and perform pairing again

(page 29).

Connecting cannot be done.

t The pairing registration information has been erased. Perform the pairing

operation again (page 29).

There is no sound.

t Make sure this system is not too far from the Bluetooth device, or this system is not receiving interference from a Wi-Fi network, other 2.4 GHz wireless device, or microwave oven.

t Check that the Bluetooth connection is made properly between this system and the Bluetooth device.

t Pair this system and the Bluetooth device again.

t Keep the system away from metal objects or surfaces.

t Make sure “BT” function is selected.

t Adjust the volume of the Bluetooth device first, if the volume level is still too low, adjust the volume level on the unit.

The sound skips or fluctuates, or the connection is lost.

t The unit and the Bluetooth device are too far apart.

t If there are obstacles between the unit and your Bluetooth device, remove or avoid the obstacles.

t If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away.

Playable Discs

Blu-ray Disc

DVD

3)

CD

3)

BD-ROM

1)

BD-R/BD-RE

2)

DVD-ROM

DVD-R/DVD-RW

DVD+R/DVD+RW

CD-DA (Music CD)

CD-ROM

CD-R/CD-RW

60

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right

1)

Since Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and version. Also, the audio output differs depending on the source, connected output jack, and selected

2) audio settings.

BD-RE: Ver.2.1

BD-R: Ver.1.1, 1.2, 1.3 including organic pigment type BD-R (LTH type)

BD-Rs recorded on a PC cannot be played if postscripts are recordable.

3)

A CD or DVD disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions supplied with the recording device.

Discs that cannot be played

• BDs with cartridge

• BDXLs

• DVD-RAMs

• HD DVDs

• DVD Audio discs

• PHOTO CDs

• Data part of CD-Extras

• Super VCDs

• Audio material side on DualDiscs

• For U.S.A. and Canada models: A disc recorded in a color system other than

NTSC, such as PAL (This system conforms to the NTSC color system.)

Notes on discs

This product is designed to play back discs that conform to the Compact Disc (CD) standard.

DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this product.

Note on playback operations of a BD/DVD

Some playback operations of a BD/DVD may be intentionally set by software producers. Since this system plays a

BD/DVD according to the disc contents the software producers designed, some playback features may not be available.

Note on double-layer

BDs/DVDs

The playback picture and sound may be momentarily interrupted when the layers switch.

Region code (BD-ROM/DVD

VIDEO only)

Your system has a region code printed on the bottom of the unit and will only play a

BD-ROM/DVD VIDEO (playback only) labeled with identical region codes or

ALL

.

Playable Types of Files

Video

Video Codec

MPEG-1 Video

*1

MPEG-2 Video

*2

Xvid

MPEG4/AVC

VC1

*1

WMV9

*1

Motion JPEG

*5

*6

Container Extension

PS

PS

*3

TS

*4

.mpg, .mpeg

.mpg, .mpeg

.m2ts, .mts

AVI

MKV

MKV

*1

MP4

*1

TS

*1

.avi

.mkv

.mkv

.mp4, .m4v

.m2ts, .mts

.mov

Quick

Time

*6

3gpp/

3gpp2

*6

.3gp, .3g2,

.3gpp, .3gp2

TS

ASF

Quick

Time

AVI

.m2ts, .mts

.wmv, .asf

.mov

.avi

Video Format

AVCHD

*1*7

Container Extension

AVCHD Format

Folder

*8

61

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Left

Music

Audio Codec

MP3 (MPEG-1 Audio

Layer III)

Extension

.mp3, .mka

*6

AAC

*1

WMA9 Standard

*1

LPCM

FLAC

*6

.m4a, .aac

*6

, .mka

*6

.wma

.wav, .mka

*6

.flac, .fla

AC3

*6

.ac3, .mka

Photo

Photo Format

JPEG

PNG

GIF

MPO

Extension

.jpeg, .jpg, .jpe

.png

*9

.gif

*9

.mpo

*6*10

*1

The system may not play this file format on a

DLNA server.

*2

The system can only play standard definition video on a DLNA server.

*3

The system does not play DTS format files on a DLNA server.

*4

*5

The system can only play Dolby Digital format files on a DLNA server.

The system can support AVC up to Level 4.1.

*6

The system does not play this file format on a

DLNA server.

*7

*8

The system can play AVCHD Ver.2.0 format

(AVCHD 3D/Progressive).

The system plays AVCHD format files that are recorded on a digital video camera, etc.

The AVCHD format disc will not play if it has not been correctly finalized.

*9

The system does not play animated PNG or

*10 animated GIF files.

For MPO files other than 3D, the key image or the first image is displayed.

Note

• Some files may not play depending on the file format, the file encoding, the recording condition, or DLNA server condition.

• Some files edited on a PC may not play.

• Some files may not be able to perform fast forward or fast reverse function.

• The system does not play coded files such as

DRM and Lossless.

• The system can recognize the following files or folders in BDs, DVDs, CDs and USB devices:

– up to folders in the 9th layer (including the root folder)

– up to 500 files/folders in a single layer

• The system can recognize the following files or folders stored in the DLNA server:

– up to folders in the 19th layer

– up to 999 files/folders in a single layer

• The system can support frame rate:

– up to 60 fps for AVCHD only.

– up to 30 fps for other video codecs.

• The system can support video bit rate up to

40 Mbps.

• The system can support video resolution up to

1920 × 1080p.

• Some USB devices may not work with this system.

• The system can recognize Mass Storage Class

(MSC) devices (such as flash memory or an

HDD), Still Image Capture Devices (SICDs), and 101-key keyboards.

• The system may not play high bit rate video files from a DATA CD smoothly. It is recommended to play high bit rate video files using a DATA

DVD or DATA BD.

62

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right

Supported Audio

Formats

Audio formats supported by this system are as follows.

Format

LPCM 2ch

LPCM 5.1ch,

LPCM 7.1ch

Dolby Digital

Dolby TrueHD,

Dolby Digital

Plus

DTS

DTS-ES

Discrete 6.1,

DTS-ES Matrix

6.1

DTS96/24

DTS-HD High

Resolution

Audio

DTS-HD Master

Audio

Function

“BD/DVD” “TV”

(DIGITAL IN)

a a a a a a a* a a a

– a

– a a* a*

– a: Supported format.

–: Unsupported format.

* Decoded as DTS core.

Note

For LPCM 2ch format, the supported sampling frequency of the digital signal is up to 48 kHz when using the “TV” function.

Specifications

Amplifier Section

U.S.A. model only:

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

(FTC)

Front L + Front R:

With 3 ohms loads, both channels driven, from 180 Hz – 20,000 Hz; rated 50 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.

Other models:

POWER OUTPUT (rated)

Front L/Front R:

75 W + 75 W (at 3 ohms, 1 kHz,

1% THD)

POWER OUTPUT (reference)

Front L/Front R/Surround L/Surround R:

125 W (per channel at 3 ohms, 1 kHz)

Center:

250 W (at 6 ohms, 1 kHz)

Subwoofer:

250 W (at 6 ohms, 80 Hz)

Inputs (Analog)

AUDIO IN

Sensitivity: 1 V/400 mV

Inputs (Digital)

TV (Audio Return Channel/OPTICAL)

Supported formats: LPCM 2CH (up to

48 kHz), Dolby Digital, DTS

HDMI Section

Connector

Type A (19pin)

BD/DVD/CD System

Signal format system

NTSC

USB Section

(USB) port:

Type A (For connecting USB memory, memory card reader, digital still camera, and digital video camera)

63

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Left

LAN Section

LAN (100) terminal

100BASE-TX Terminal

Wireless LAN Section

Blu-ray Disc/DVD receiver

(HBD-E6100/HBD-E4100/

HBD-E3100/HBD-E2100)

Standards Compliance

IEEE 802.11 b/g/n

Frequency and Channel

2.4 GHz band: channels 1–11

Bluetooth Section

Communication system

Bluetooth Specification version 3.0

Output

Bluetooth Specification Power Class 2

Maximum communication range

Line of sight approx. 10 m (33 ft)

1)

Frequency band

2.4 GHz band

Modulation method

FHSS (Freq Hopping Spread Spectrum)

Compatible Bluetooth profiles

2)

A2DP 1.2 (Advanced Audio Distribution

Profile)

AVRCP 1.3 (Audio Video Remote

Control Profile)

Supported Codecs

3)

SBC

4)

, AAC

Transmission range (A2DP)

20 Hz – 20,000 Hz (Sampling frequency

44.1 kHz, 48 kHz)

1)

The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating

2) system, software application, etc.

Bluetooth standard profiles indicate the purpose

3) of Bluetooth communication between devices.

Codec: Audio signal compression and

4) conversion format

Subband Codec

FM Tuner Section

System

PLL quartz-locked digital synthesizer

Tuning range

87.5 MHz – 108.0 MHz (100 kHz step)

Antenna (aerial)

FM wire antenna (aerial)

Speakers

Front/Surround (SS-TSB123) for

BDV-E6100

Front (SS-TSB123) for BDV-E4100

Dimensions (w/h/d) (approx.)

100 mm × 650 mm × 100 mm (4 in ×

25 5 /

8

in × 4 in) (wall-mounted part)

260 mm × 1,200 mm × 260 mm

(10 1 /

4

in × 47 1 /

4

in × 10 1 /

4

in) (whole speaker)

Mass (approx.)

Front: 1.3 kg (2 lb 14 oz) (wall-mounted part with speaker cord)

2.9 kg (6 lb 7 oz) (whole speaker)

Surround: 1.4 kg (3 lb 2 oz)

(wall-mounted part with speaker cord)

3.0 kg (6 lb 10 oz) (whole speaker)

Front/Surround (SS-TSB122) for

BDV-E3100

Surround (SS-TSB122) for

BDV-E4100

Dimensions (w/h/d) (approx.)

90 mm × 205 mm × 91 mm (3

5

/

8

8

1

/

8

in × 3

5

/

8

in)

in ×

Mass (approx.)

Front: 0.53 kg (1 lb 3 oz) (with speaker cord)

Surround: 0.62 kg (1 lb 6 oz) (with speaker cord)

Front/Surround (SS-TSB121) for

BDV-E2100

Dimensions (w/h/d) (approx.)

95 mm × 189 mm × 80 mm (3

3

/

4

7

1

/

2

in × 3

1

/

4

in)

in ×

Mass (approx.)

Front: 0.49 kg (1 lb 2 oz) (with speaker cord)

Surround: 0.54 kg (1 lb 4 oz) (with speaker cord)

64

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right

Center (SS-CTB122) for BDV-E6100/

BDV-E4100/BDV-E3100

Dimensions (w/h/d) (approx.)

240 mm × 90 mm × 85 mm (9 1 /

2

in ×

3 5 /

8

in × 3 3 /

8

in)

Mass (approx.)

0.58 kg (1 lb 5 oz) (with speaker cord)

Center (SS-CTB121) for BDV-E2100

Dimensions (w/h/d) (approx.)

225 mm × 84 mm × 75 mm (8

7

/

8

3

3

/

8

in × 3 in)

in ×

Mass (approx.)

0.5 kg (1 lb 2 oz) (with speaker cord)

Subwoofer (SS-WSB123) for

BDV-E6100/BDV-E4100/BDV-E3100

Dimensions (w/h/d) (approx.)

225 mm × 365 mm × 345 mm (8

7

/

8

in ×

14

3

/

8

in × 13

5

/

8

in)

Mass (approx.)

5.8 kg (12 lb 13 oz) (with speaker cord)

Subwoofer (SS-WSB122) for

BDV-E2100

Dimensions (w/h/d) (approx.)

220 mm × 305 mm × 255 mm (8

3

/

4

in ×

12

1

/

8

in × 10

1

/

8

in)

Mass (approx.)

3.8 kg (8 lb 7 oz) (with speaker cord)

General

Power requirements

120 V AC, 60 Hz

Power consumption

On: 95 W

Standby: 0.3 W (For details on the

setting, see page 43.)

Dimensions (w/h/d) (approx.)

430 mm × 50.5 mm × 296 mm (17 in ×

2 in × 11 3 /

4

in) incl. projecting parts

Mass (approx.)

2.7 kg (5 lb 16 oz)

Design and specifications are subject to change without notice.

• Standby power consumption: 0.3W

• Over 85% power efficiency of amplifier block is achieved with the full digital amplifier, S-Master.

65

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Left

Language Code List

The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language Code Language Code Language Code Language

1027 Afar

1028 Abkhazian

1032 Afrikaans

1039 Amharic

1044 Arabic

1045 Assamese

1051 Aymara

1052 Azerbaijani

1183 Irish 1347 Maori 1507 Samoan

1186 Scots Gaelic 1349 Macedonian 1508 Shona

1194 Galician

1196 Guarani

1350

1352

Malayalam

Mongolian

1509

1511

Somali

Albanian

1203 Gujarati

1209 Hausa

1217 Hindi

1226 Croatian

1353

1356

1357

1358

Moldavian

Marathi

Malay

Maltese

1512

1513

1514

1515

Serbian

Siswati

Sesotho

Sundanese

1053 Bashkir 1229 Hungarian

1057 Byelorussian 1233 Armenian

1059 Bulgarian

1060 Bihari

1235

1239

Interlingua

Interlingue

1061 Bislama 1245 Inupiak

1066 Bengali; 1248 Indonesian

Bangla

1067 Tibetan

1253

1254

Icelandic

Italian

1363

1365

1369

1376

1379

1393

1403

1408

Burmese

Nauru

Nepali

Dutch

Norwegian

Occitan

(Afan)Oromo

Oriya

1516

1517

1521

1525

1527

1528

1529

1531

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

1070 Breton

1079 Catalan

1093 Corsican

1097 Czech

1103 Welsh

1105 Danish

1109 German

1130 Bhutani

1142 Greek

1144 English

1145 Esperanto

1149 Spanish

1150 Estonian

1151 Basque

1157 Persian

1165 Finnish

1166 Fiji

1171 Faroese

1174 French

1181 Frisian

1257 Hebrew

1261 Japanese

1269 Yiddish

1283 Javanese

1287 Georgian

1297 Kazakh

1298 Greenlandic

1299 Cambodian

1300 Kannada

1301 Korean

1305 Kashmiri

1307 Kurdish

1311

1313 Latin

1326 Lingala

1327 Laothian

1332 Lithuanian

1334

1345

Kirghiz

Latvian;

Lettish

Malagasy

1417 Punjabi

1428 Polish

1435 Pashto;

Pushto

1436 Portuguese

1463 Quechua

1481 Rhaeto-

Romance

1482 Kirundi

1483 Romanian

1495 Sanskrit

1498 Sindhi

1501 Sangho

1505 Slovak

1506 Slovenian

1532 Tagalog

1534 Setswana

1535 Tonga

1538 Turkish

1539 Tsonga

1540 Tatar

1543 Twi

1557 Ukrainian

1564 Urdu

1572 Uzbek

1489 Russian 1581 Vietnamese

1491 Kinyarwanda 1587 Volapük

1613 Wolof

1632 Xhosa

1665 Yoruba

1502 Serbo-Croatian 1684 Chinese

1503 Singhalese 1697 Zulu

1703 Not specified

66

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right

Parental Control/Area Code List

Code Area

2044 Argentina

2047 Australia

2046 Austria

2057 Belgium

2070 Brazil

2090 Chile

2092 China

2093 Colombia

2115 Denmark

2165 Finland

2174 France

Code Area Code Area Code Area

2109 Germany

2200 Greece

2219 Hong Kong

2248 India

2238 Indonesia

2239 Ireland

2254 Italy

2362 Mexico 2499 Sweden

2376 Netherlands 2086 Switzerland

2390 New Zealand 2543 Taiwan

2379

2427

2424

Norway

Pakistan

Philippines

2428 Poland

2528 Thailand

2184 United

Kingdom

2276 Japan

2304 Korea

2436 Portugal

2489 Russia

2333 Luxembourg 2501 Singapore

2363 Malaysia 2149 Spain

67

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\010COVIX.fm

masterpage: Left

Index

Numerics

3D 27

3D Output Setting 46

A

A/V SYNC 37

Attenuate - AUDIO 48

Audio DRC 48

Audio Language 49

Audio Output 48

Audio Return Channel 50

Audio Settings 48

Auto Display 50

B

BD Audio MIX Setting 48

BD Hybrid Disc Playback Layer 49

BD Internet Connection 49

BD Parental Control 50

BD/DVD Menu Language 49

BD/DVD Viewing Settings 49

BD-LIVE 26

BD-ROM 24p Output 47

Bluetooth 28

BONUSVIEW 26

BRAVIA Sync 40

C

CD 60

Child Lock 42

Cinema Conversion Mode 47

Connection Server Settings 51

Control for HDMI 40, 50

D

DLNA 33, 51

Dolby Digital 37

DTS 37

DVD 60

DVD Aspect Ratio 47

DVD Parental Control 50

DVD-ROM 24p Output 47

E

Easy Network Settings 52

Easy Setup 23

F

FM Mode 38

Front panel 13

Front panel display 14

G

Gracenote Settings 50

H

HDMI

YCbCr/RGB (HDMI) 47

HDMI Deep Color Output 47

I

Initialize Personal Information 52

Internet content 32

Internet Settings 51

Internet Video Parental Control 50

Internet Video Unrated 50

L

Language Code List 66

68

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\010COVIX.fm

masterpage: Right

M

Main Unit illumination 50

Multiplex broadcast sound 38

N

Network Connection Diagnostics 51

Network Settings 51

Network Update 46

NFC 30

O

OSD Language 50

P

Parental Control Area Code 49

Parental Control Settings 49

PARTY Auto Start 51

Password 49

Pause Mode 48

Play information 27

Playable discs 60

Q

Quick Start Mode 50

R

Rear panel 14

Region code 61

Registered Remote Devices 51

Remote control 15

Remote Start 51

Renderer Access Control 51

Renderer Options 51

Reset to Factory Default Settings 52

Resetting 52

S

Screen Format 46

Screen Saver 50

Screen Settings 46

SLEEP 42

Slideshow 36

Software License Information 51

Sound Effect 48

Speaker Settings 40, 49

Distance 41

Level 41

Subtitle Language 49

System Information 51

T

Test Tone 41

TV Screen Size Setting for 3D 46

TV Type 46

U

Update 46

USB 28

W

WEP 22

WPA2-PSK (AES) 22

WPA2-PSK (TKIP) 22

WPA-PSK (AES) 22

WPA-PSK (TKIP) 22

69

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100

(PMRF 06)\4446733121_US (U2)\110BCO.fm

masterpage: Left

The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL.

http://www.sony.com/blurayhtsupport/

©2013 Sony Corporation Printed in Malaysia

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Blu-Ray player Black
  • 1000 W 5.1 channels
  • Dolby Digital Plus, Dolby TrueHD, DTS, DTS 96/24, DTS Neo:6, DTS-ES, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD HR
  • 3D
  • FM radio
  • Bluetooth Wi-Fi

Related manuals

Download PDF

advertisement

Table of contents