GS101205 Series Features and Benefits GEARTOOTH SPEED SENSOR

GS101205 Series Features and Benefits GEARTOOTH SPEED SENSOR
GEARTOOTH SPEED SENSOR
GS101205 Series
Flange mount gear sensor rated to 150°C
Features and Benefits
Capable of operating up
to 150ºC


Sealed design exceeds
IEC60529 IP67 standard
for immersion



Resistant to fuels, solvents,
and lubricants associated with
engines, transmissions, brakes
and chassis systems

Operates at arbitrarily
low speeds
Mating connector Delphi
12162280
Applications
Easily customizable connector
orientation

ESD resistant to 15kV
(contact discharge)

Transmission speed

Wheel speed

Engine speed

Anti-lock braking systems
Dimensions inches (mm)
LASER MARK LOCATION
0.10
(2.5)
1.11
(28.2)
0.14
(3.5)
MEXICO
XXXX
XXXX
VCC
OUTPUT
GROUND
90°
0.84 (21.3)
0.49
(12.5)
Ø 0.61 (15.6)
0.25
(6.3)
2.38
(60.5)
Ø 0.91 (23)
Ø 0.64 (16.2)
1.24 ±0.01
(31.55 ±0.2)
0.10
(2.5)
Ø 0.26 (6.5)
0.67
(17)
Ø 0.75 (18.9)
1.43
(36.3)
Open Collector
Sinking Block Diagram
Recommended external
pull-up resistor:
Volts
(DC)
5
9
12
15
Ohms
1000
1800
2400
3000
Magnet
VCC
(brown)
Pull-up
Resistor
4 Output
(black)
3 Ground
(blue)
1
GEARTOOTH SPEED SENSOR
GS101205 Series
Mechanical Specifications
Airgap
Max Installation Torque
1.5 mm (with Cherry test gear)
50 in-lbs (for a 1/4 - 20 bolt or M6 X 1)
Electrical Specifications
Operating Voltage Range
Supply Current
Output Saturation Voltage
Output Current
Operating Temperature
Storage Temperature Range
Output Risetime
Output Falltime
Bulk Current Injection
Conduction and Coupling
Electronic Discharge
Radiated Immunity
Immunity to Magnetic Fields
Radiated Emissions
Immunity to AC Fields
Radiated Emissions
Maximum Speed
5–30 VDC
6 mA max
600 mV max
25 mA max
-40° to 150ºC*
-55° to 150ºC
10µS
10µS
SAE J1113-4 (250klHz to 500MHz; 100mA/m)
SAE J1113-12 (±200V)
SAE J1113-13 (±15kV)
SAE J1113-21 (10kHz to 18GHz; 200 V/m)
SAE J1113-22 (600microT AC Field; 5Hz to 2kHz; .2mT & 1mT DC Field)
SAE J1113-23
SAE J1113-25 (15kV/m)
SAE J1113-41 (Class 4)
10kHz (with Cherry target)
*For continuous operation at 150°C supply voltage should be limited to 5.5V max.
Environmental Specifications
Water Immersion
Dust, Sand and Gravel Bombardment
Vibration
Mechanical Shock
Tooth
Height
Tooth
Spacing
Tooth
Thickness
Sensing
Gap
Tooth
Width
Specifications subject to change without notice.
IEC60529 IP67
SAE J400 JUN80
Sinusoidal vibration max 15g’s from 40 to 2000 Hz
18 shocks at 50g’s 11ms per Mil Std 202F
For best results, we recommend targets made
from low carbon cold rolled steel. Other factors
that influence sensor performance include
geartooth height and width, space between
teeth, shape of the teeth and thickness of the
target. As a general guideline, consider a target
with the following minimum parameters:
Tooth
Height
Tooth
Width
Distance
Between
Teeth
Target
Thickness
.200"
.100"
.400"
.250"
Contact
Call, fax or visit our website
for more information.
Cherry Electrical Products
11200 88th Avenue
Pleasant Prairie, WI 53158
Phone:
Fax:
Web:
e-mail:
800 285 0773 • 262 942 6500
262 942 6566
www.cherrycorp.com
[email protected]
© 2007 Cherry Corporation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement