Sony BKMFW50 Stereo Receiver Operating instructions

Add to my manuals
28 Pages

advertisement

Sony BKMFW50 Stereo Receiver Operating instructions | Manualzz
<=> ONY. 2-660-786-02 (1)
Streaming Receiver
Adaptor
Operating Instructions
BKM-FW50
© 2005 Sony Corporation
Using the BKM-FW50 Streaming Receiver Adaptor
When not connected to a network
Playback still image or video files from a memory card
В f Preparations ~
Take pictures with a
digital camera
в
Copy still image/video
files from your
computer '
CF card
=
When connected to a network
Playback still image or video files downloaded from a network
; f Preparations =
Wet/ATTP server”
| View on a Flat Panel Display
Download sti! | To set up @ “Streaming Play”
image/videc files o » page 13
from the Web/ RN ВЕ
smo. HTTP server E.
o A
Upload still image/ — :
vídeo files...
`
# ARNE ORL HE ME OTH OM ВАО КЕ OA jy oe
I À messe
E 1
% Ÿ +
Save/playback from a CF card
To set up & “Store Local”
po «ww» flow of data » раде 14
am _/ To set up @ “Local Play"
» page 15
4
| Memory card reader/writer required. 2 CF slot adaptor reguired. 3 Apache and IIS (Internet Information Server) are
the only supported servers for downloading and playing back still image and video files,
|
Table of Contents
Precautions... mesons oe 4
About This Manual .......... 2... 4
Names and Functions of Parts and
Controls .............».e..e=...e.enezerneancene rea 5
Installation ...............-Áe =>... ree 6
Playback of Still Images or Vídeo From a
CF Car J MUNRENKENUEKKERN 7
Compatible media and file formats .............. 7
Inserting a CF card... icici, 7
Using slide show playback eee 8
Preparations for Using the Network
FUNCtions ..….crcrsersrenssressenssenranarensennensenmans 9
Assigning a fixed IP address to
the BKM-FW350 ......... ee... 9
Automatically obtaining an IP address ...... 10
Computer Operation ………mceciermenes 11
Controiling the display... eres ||
Setting 1tems on respective sereens............ 11
Troubleshooting ........—— e... .e...... 22
List of Error Codes vivre, 24
Specifications .......ce.—m=ees=amerraa ZA 27
3
Precautions
* The software specifications of this unit
are subject to change for improvements
without notice.
Scteens shown by application software
may differ slightly from the illustrations
shown in this manual.
For safety, connect the port of this unit
only to a network where there is no
danger of excessive voltage or voltage
surges.
The steps described in this manual are
guaranteed only for use under the
following environment conditions.
Operating system:
Microsoft Windows XP
Browser:
Microsoft Internet Explorer 6.0 or
later
The following may resuit in damage to
data or damage to the CF card or
Microdrive:
— Biecting a CF card while it is being
accessed
— Placing a Microdrive near a strong
magnet
The Microdrive is a compact hard disk
drive. Because it is storage medium
utilizing a rotating disk, it is more
susceptible to shocks and impact when
compared to flash memory devices such
as the Memory Stick and the CF card.
To ensure security on the network, setting
a user name and password is
recommended. For information on how to
make these settings, see the section
“Setup screen” (page 20).
Because the unit reaches high
temperatures when placed near the
display and used for a long period of
time, be careful when removing it from
the display.
MA AAA ALBANIA ADA LAA R
About This Manual
This manual describes use and operation of
the BKM-FW50 as installed in a Flat Panel
Display of the FWD series and connected
to a network.
For information on regular operation of the
display, consult the operating instructions of
the FWD series product.
EEE ERLE EEE RR Rd NF hd BRN hd ER RFE NNT ERR +R NFA NF FR NRF FPF FA FF TPANF FRA n npn nnn
» Microsoft and Windows are registered trademarks of Microsoft Corporation in the United
States of America and/or other countries,
CompactFlash and CF card are trademarks of SanDisk USA.
Microdrive 15 a registered trademark of Hitachi Global Storage Technologies.
Memory Stick and Memory Stick Duo are trademarks of Sony Corporation.
All other product names, company names, etc. mentioned 1n this manual are trademarks or
registered trademarks of their respective owners.
4 [Precautions / About This Manual
Names and Functions of Parts and Controls
©
©
J
COMPACT FLASH mb 6
с $ RESET
25
| |
o ©
© USB port
The port will be used for expanded
functions to be introduced in future.
© Memory card slot cover fastening
screw
© Network connector (10BASE-T/
100BASE-TX)
Serves to connect the unit to a network,
using a I0BASE-T/100BASE-TX LAN
cable.
O Memory card slot cover
© Access indicator
Lights green when a CF (CompactFlash)
card is being accessed by the unit.
Before inserting a CF card, make sure to
read “Precautions” on page 4.
O Memory card slot
Accepts a CF card or a Microdrive.
O RESET button
When this button 1s pressed and held for
more than 3 seconds, all settings of the unit
revert to the default condition.
© Eject button
Press this button to remove a CF card from
the memory card slot.
Names and Functions of Parts and Controls 5
Installation
Before installation
» Turn off power to the display and all
other equipment connected to the display.
For the display, proceed as follows: press
© to put the display into standby mode
and then disconnect the power cord from
the AC outlet.
+ While carrying out the installation, the
display must be firmly secured.
Install the BKM-FW50 inside the display
as follows.
1 Нап optional adaptor 18 installed,
loosen its fastening screws (top and
bottom) by turning counterclockwise
with a flatblade screwdriver and then
carefully pull out the adaptor from
the display.
When option slot is at
{eft of display *
* The location of the option slot differs
according to the model. On models with
multiple option slots, use a slot that
supports vides/Communication functions
(VIDEO/COM port). Consult the
documentation of the FWD series product
for more information,
6 [Installation
2 Insert the BKM-FW50 into the
display with correct orientation.
Make sure that the adaptor is firmly
seated in the internal connector of the
display. Then tighten the fastening
screws (top and bottom) with 4 flarbiade
screwdriver and perform the necessary
connections.
Caution
Do not touch the connector section
Never touch the connector section inside
the display. Otherwise there is a risk of
accidents or damage.
Playback of Still
Images or Video
From a CF Card
The BKM-FW50 is equipped with a
memory card slot that accepts
CompactFlash cards (not supplied). If you
insert a CF card that contains images shot
with a digital still camera into the slot of
the BKM-FW30, the images can be viewed
on the dispiay in a slide show format.
You can make various settings for playback
of still images or video, For information on
how to make these settings, see the section
“Computer Operation” (page 11).
CF (CompactFlash) card,
Microdrive
File format: JPEG format, MPEG?
format etc. (For detalls, see
page 13.)
Recommended resolutions:
1360 x 768, 1280 x 768,
1024 x 768
Maximum resolution*:
2592 x 1944
Minimum resolution:
640 x 480
* The higher the resolution, the longer images
take to display.
* The following may result in damage to
data or damage to the CF card or
Microdrive:
— Ejecting a CF card while it is being
accessed
— Placing a Microdrive near a strong
magnet
+ À CF card or a Microdrive can be used as
storage media for the BKM-FW50.
CF card
Buffalo: RCF-G256MB (256 MB)
RCF-G512MB (512 MB)
RCF-X64MY (64 MB)
RCF-X256MY (256 MB)
RCF-X512MY (512 MB)
SanDisk: SDCFB 64M (64 MB)
SDCFB 512M (512 MB)
SDCFH 512MB (512 MB)
SDCFH 208 (2 GB)
Hagiwara Sys-Com:
HPC-CF64V {64 MB)
HPC-CF512Y (512 MB)
HPC-CF512ZP (512 МВ)
Microdrive
Hitachi: HMS360402D5CF00 (2 GB)
HMS360604D5CF00 (4 GB)
» Compatibility with CF cards and
Microdrives has been confirmed but is
not guaranteed for all CF cards and
Microdrives.
1 Remove the memory card slot cover
fastening screw with a Phillips
screwdriver.
NN
y
7
AN
2 Open the memory card slot cover and
insert the CF card into the memory
card siot.
Take care to insert the CF card with correct
orientation, as shown in the illustration.
Playback of Still Images or Video From a CF Card 7
Insert the CF card completely into the slot,
aliging the label with the arrow facing as
shown,
3 Replace the memory card slot cover
and tighten the fastening screw with a
Phillips screwdriver,
When a CF card which contains still images
taken with a digital still camera is inserted
into the BKM-FW50, JPEG format still
image files will be automatically detected,
and the images will be shown on the
display as a slide show. (The input signal
for the display must be set to OPTION 1
RGB at this time. For details, consult the
operating instructions of the display.)
In addition, the BKM-FW50 is set to
automatically display any still image or
video slide show saved in the
“DCIM\101MSDCF” foider, as the factory
default.
LE
The “DCIMUOIMSDCP” foider is
automatically created with the Sony Cyber-
shot digital camera. With some models, a
“DCIM\0O0MSDCHP”" folder is created. For
details, consult the operating instructions of
the Cyber-shot.
When inserting a Memory Stick Duo into
the BEM-FWSO, insert it into a
commercially available Memory Stick Duo
to CF adaptor first.
When using a digital camera other than the
Cyber-shot, edit the memory card that was
used when taking the pictures, create a
folder, DCIM\101MSDCF”, on the CF
card, and move the pictures you wish to
view into the folder before inserting the CF
card into the BKM-FW30.
Detailed control of playback
method
When the display is connected to a network
via the BKM-FWS50, any still image or
video file stored on the CF card can be
shown on the display. For information on
settings and operation in this case, see the
section “Computer Operation” (page 11).
Removing the CF card
When the access indicator is lif, images are
being stored or read. Never eject a CF card
or tum the power off during this time.
Doing so may result in damage to data or
the CF card itself,
Í Remove the memory card slot cover
fastening screw with a Phillips
screwdriver.
2 Press the eject button to remove the
CF card.
3 Replace the memory card slot cover
and tighten the fastening screw with a
Phillips screwdriver.
8 ¡Playback of Still Images or Video From a CF Card
Preparations for
Using the Network
Functions
The BKM-FW50 can be connected to a
network with 10BASE-T/1GOBASE-TX
LAN cable.
When connected to a LAN, the IP
addresses of the BKM-FWS50 can be set
using one of the following two methods,
Consult your network administrator
regarding details about IP address selection.
« Assigning a fixed IP address to the
BKM-FW50
Normally this method should be used.
+ Automatically obtaining an IP
address
If the network to which the BKM-FW50
is connected has a DHCP server, you can
have the DHCP server automatically
assign an {P address. Note that in this
case the IP address will change every
time the display in which the BKM-
FW50 is installed is turned on.
Note that a separate IP address 1s necessary
for the display control function and for the
still image/video playback function.
Regarding details of IP address selection,
consult your network administrator.
Setting an IP address for the
display control function
First, assign an IP address to the display
control function, using the following
procedure. The IP address assigned in this
way 1s used for calling the display control
function of the BKM-FW50 from a
computer on the network. Also consuit the
operating instructions of the display.
1 Connect the BKM-FWS50 installed in
the display to the network, using
suitable LAN cable.
2 Tum power to the display on and
wait for about 30 seconds.
3 Press the MENU button on the
display to bring up the main menu,
4 Use the 4/4 buttons to select
“INITIAL SETUP/INFORMATION”
and press the ENTER button. The
“INITIAL SETUP/INFORMATION”
menu appears.
5 Use the 4/4 buttons to select “IP
Address Setup” and press the ENTER
button,
6 Use the 4/4 buttons to select
“Manual” and press the ENTER
button.
7 Enter the necessary items.
1} Use the 4; $ buttons to select the
item to enter manually and press
the ENTER button. A cursor
appears in the leftmost field of the
selected item.
2) Use the 4/¥ buttons or the
numeric buttons on the remote
control to enter a three-digit
number (0 - 255). When you
press the ENTER button or the
=> button, the cursor moves to
the next field on the right. Enter a
number in the same way.
3) When all four fields of an item
have been set, pressing the
ENTER button or the * button
confirms the entry for that tem.
4) Make settings for the other items
in the same way.
8 Use the 4/4 buttons to select
“Execute” and press the ENTER
button.
Next, assign an IP address to the still
image/video playback function.
Setting an IP address for the still
image/video playback function
1 Start the browser of the computer
(Internet Explorer 6.0 or later).
Preparations for Using the Network Functions 9
2 Enter the IP address that was
assigned to the display control
function into the address field, m the
format “http://xXx,.XXX.XXX.XXX”.
Then press the Enter key on the
keyboard.
When a user name and password
have been set, the “Network
Password” screen appears. Enter the
user name and password that were
set, and then proceed to the next step.
3 Click the “Setup” tab,
The “Setup” screen appears. This
screen lets you set up the Network
Password. The factory default
settings are as follows:
Name: root
Password: fw50ad
4 Click the “Network” button.
5 Under “Internet Protocol (TCP/IP),
click “Specify an IP address”. Then
enter the IP address for the still
image/video playback function in the
input fields.
6 Click “Apply”.
‘Automatically obtaining an IP.
address E
If you set up the display as described
below, an IP address can be assigned
automatically by a DHCP server on the
network.
1 Connect the BKM-FW50 installed in
the display to the network, using
suitable LAN cable.
2 Turn power to the display on and
wait for about 30 seconds.
3 Press the MENU button on the
display to bring up the main menu.
4 Use the 4/4 buttons to select
“INITIAL SETUP/INFORMATION”
and press the ENTER button. The
“INITIAL SETUP/INFORMATION”
menu appears.
5 Use the 14 buttons to select “IP
Address Setup” and press the ENTER
button.
6 Use the 4/4 buttons to select
“DHCP” and press the ENTER
button.
1 Use the 4/4 buttons to select
“Execute” and press the ENTER
button.
The IP address may not be obtained
correctly, depending on the router being
used. Confirm the specifications and
operations of the router before use.
Checking the automatically
assigned IP address
When an IP address has been automatically
assigned, you can call up the display
control screen of the BKM-FW50 as
follows and check which IP address has
been assigned. The IP address changes each
time power to the display is turned on.
Therefore you must check the IP address as
described here every time after turning
power to the display off and on again.
1 Press the MENU button on the
display to bring up the main menu.
2 Use the 4/4 butions to select
“INITIAL SETUPANFORMA TION”
and press the ENTER button, The
“INITIAL SETUPANFORMATION”
menu appears,
3 Use the 4/¥ buttons to select
“INFORMATION” and press the
ENTER button.
4 Check the IP address that is displayed
in the “TP address” field.
10 Preparations for Using the Network Functions
Computer Operation
Controlling the display
You can make various display settings on
the screen of the computer.
Make sure that the BKM-FW50 is properly
installed in the display, and that the BKM-
FW30, computer, and router or hub are
properly connected with network cable.
Then tum on power to the dispiay, the
computer, and the router or hub.
There are five display screens, divided by
function: “Information” screen,
“Configure” screen, “Control” screen,
“Player” screen, and “Setup” screen.
For details on button functions, consult the
operating instructions of the FWD series
product.
1 Start the browser of the computer
(Internet Explorer 6.0 or later).
2 Enter the IP address that was assi gned
to the display control function into the
address field, in the format “http://
XXX.XXX.XXX.XXX”. Then press the
Enter key on the keyboard.
When a user name and password
have been set, the “Network
Password” screen appears, Enter the
user name and password that were
set, and then proceed to the next step. 8
3 Click the function tab at the top of the
screen and select the desired screen.
This screen shows the model name, serial
number and other display information, as
well as the power status and the input
signal selection.
The screen is for information only. There
are no items that cañ be set.
This screen also displays error information.
For details on error information, see “List ET
of Error Codes” (page 24). :
Computer Operation 11
Clear (Delete)
Lets you delete error information displayed
in the Player Error History.
Up to 30 errors appear in the Player Error
History in the order that they occurred. As
new errors occur after this maximum is
reached, old error information 1s deleted,
starting with the oldest.
Configure screen
Timer
Lets you make settings for the timer
function.
Click “Apply” when done.
Screen Saver
Lets you make settings for the screen saver
function.
Click “Apply” when done.
Picture and Picture
Lets you make settings for the Picture and
Picture function.
Click “Apply” when done.
For details on these functions, consult the
operating instructions of the FWD series
product. Not ali functions are supported by
all display models.
12 |Computer Operation
Control screen
POWER
Switches the display on or off.
INPUT
Lets you select the input signal.
PICTURE MODE
Lets you select the picture mode.
ASPECT
Lets you switch the aspect ratio of the
image.
CLOSED CAPTION
Lets you control the display of subtitles on
the screen.
When PICTURE MODE has been set to
Userl, User2, or User3, the following
adjustments are possible. (Also consult the
operating instructions of the FWD series
product.)
Contrast +/— buttons
Adjust the screen contrast.
Brightness +/~ buttons
Adjust the screen brightness.
Chroma +/- buttons
Adjust the color intensity.
Phase +#— buttons
Adjust the color balance.
Player screen
This screen lets you make settings for still
image and video playback and operate the
PC Presentation function of the BKM-
FW 350.
Supported file formats
The following formats are supported for
still image/video playback.
File type File format Extension
Still JPEG format pg. pe, jpeg
image GIF format gif
PNG format png
BMP format bmp
Video* MPEG PS format mpg, m2v,
(Upto 15 Mbps; mpeg
480p or 576p
recommended)
Audio MP3 format mp3
* Format of audio in video files:
Linear PCM
* MPEG-1 Audio Layer-2 (MP2)
* MPEG-1 Audio Layer-3 (MP3)
Supported servers
The following Web/HTTP server formats
are supported:
* Apache
+ IIS
The server software must be installed
beforehand. For details, consult the
respective operating instructions of each
server software,
Streaming Play
SiR pe fini BA Le
Plat afoider named "TT
This screen lets you make settings for
display and playback of still image and
video files stored on a Web/HTTP server,
A maximum of 1,000 files are playable
with Streaming Play. Each file can be no
larger than 2 GB in size.
Server Address
Enter the address of the Web/HTTP server
where the still image or video files are
stored. When entering the IP address of the
server, enter it in the format, “http://
XXX. XXX. Xxx. XXX” (“Xxx represenis a
figure no more than three digits).
Play file/folder name
Specifies the location of the stil! image or
video files on the Web/HTTP server
specified in the “Server Address” field. You
can either enter the location in the text box or
ciick the “Browse” buiton and select the file
or folder location on the screen that appears.
+ Îf an “index.html!” file is stored in the
folder, other files and folders contained in
the folder are not displayed.
* Files are played in ASCII code order.
Naming files in alphabetical or numerical
order is recommended.
Repeat
Select this check box if the still images or
video files are to be played back repeatedly.
Computer Operation 13
Save
Saves the settings made on this screen.
Piay
Starts playback of the selected file or of the
still image/video files in the folder
specified in “Play file/folder name”.
Stop
Stops still image/video playback that was
initiated by clicking the “Play” button.
Store Local
This screen lets you download still image/
video playback files stored on the Web/
HTTP server and save them on a CF card
(not supplied) inserted 1n the memory card
siot of the BEM-FW50.
Server Address
Enter the IP address of the Web/HTTP
server,
Play file/folder name
Specifies the location of the still image or
video files on the Web/HTTP server
specified in the “Server Address” field.
You can either enter the location in the text
box or click the “Browse” button and select
the file or folder location on the screen that
appears.
14 Computer Operation
‚ Seterad Folder.
LI WS Ня - 7
=l trineo 2E-1ub-2004
пало
1.7 DE Ab
If-an “index.html” file is stored in the
folder, other files and folders contained in
the folder are not displayed.
Folder name
Specifies the save location on the CF
(CompactFlash) card inserted in the
memory card slot. You can either enter the
location in the text box or click the
“Browse” button and select the file or
folder location on the screen that appears.
‘selected Frider à
= 18-44-2002
Er MISC 18-56-2002
- 1B-FM-2002
1B-RFE{.200Z
18-H54-Z002
18-500
E
Delete
Deletes a file or foider saved on the
memory card inserted in the unit.
New Folder
Creates a new folder on the memory
card inserted in the unit.
Store
Starts downloading the still image or video
file or the contents of the folder specified in
“Play file/folder name”.
Scheduied Download
This function lets you periodically
download still image or video files from a
Web/HTTP server to an inserted memory
card. You can select the day of the week,
the time, and the interval.
+ When setting the start time for the
scheduled download function, select a
time when the display will be turned off.
H the dispiay is already on when
download begins, displaying the image
on the screen takes priority over the
download. In such a case, a file may not
be downloaded properly.
* When setting the start time for download,
take the on/off timer setting on the
display into consideration, as well.
» Do not turn the display off while a file 15
in the process of being downloaded.
Doing so may cause the file to be
downloaded improperly.
Auto Play
By selecting the “On” setting here, data
downloaded from a Web/HTTP server 18
given priority, even if “On” is selected for
“Auto Play” in the “Play Settings” screen
(page 17), and automatic playback of still
image and video files begins after
downloading is complete.
If the filename of a file downloaded from
the server already exists on the CF
(CompactFlash) card inserted in the
memory card slot, the existing flle will
always be overwritten. When there 1s no
space left on the CF card, an error will
occur in the Scheduled Download function,
and automatic downloading of new content
will stop.
Local Play
This screen lets you make settings for
display and playback of stil image and
video files stored on a CF (CompactFlash)
card inserted in the memory card slot of the
BKM-FW50.
A maximum of 1,000 files are playabie
with Local Play. Each file can be no larger
than 2 GB in size.
Play file/folder name
Specifies the location of the still image or
video files on the CF card. You can either
enter the location in the text box or click
the “Browse” button and select the file or
folder location on the screen that appears.
The “DCIM\101MSDCF” foider is set as
the factory default.
*Sedacind Felder Ju
19-30-2008
TH-IUN-2007
L9-JUN-200Z
18-94-2002
Computer Operation! 15
Delete
Deletes a file or folder saved on the
memory card inserted in the unit.
The “DCIMUOIMSDCE” folder is set as
the “Play file/folder name” as the factory
defauit.
Repeat
Select this check box if the still images or
video files are to be played back repeatedly.
Save
Saves the settings made on this screen.
Play
Starts playback of the selected file or of the
still image/video files in the folder
specified in “Play file/folder name”,
Stop
Stops still image/video playback that was
initiated by clicking the “Play” button.
PC Presentation
password UT
pasto ret up whan motte wa
BL LU mem Y A
Predestaled software is reguived for Wiz funcion
For detaits, please sus “Operation Imstrechons” оп С
DAD в e | ae ель
This screen lets you start and stop the PC
Presentation function of the BKM-FW30.
By showing the contents of the computer
desktop on the display, the PC Presentation
function allows using the dispiay as an
external monitor for the computer.
To enable use of the PC Presentation
function, UltraVNC must be installed on
the computer.
16 ¡Computer Operation
Ultra YNC is free software licensed under
GNU GPL.
Connect PC
Select this to enabie the PC Presentation
function of the BKM-FW350. The following
items also need to be set,
IP Address:
Enter the IP address of the computer.
Enter the IP address in the following
format: “XXX.XXX.XXX. XXX” xxx”
represents a figure no more than three
digits)
Password:
Enter the password that was set during
the installation of на УМС.
PC Resolution:
Select the screen resolution of the
connected computer.
If the resolution selected here differs
from the computer's actual resolution,
the screen will not display at the proper
size. Select a resolution so the screen
size matches the display.
Connect
Starts the PC Presentation function. When
you click this button, the desktop screen of
the computer at the specified IP address
appears on the dispiay.
Disconnect
Select this to disable the PC Presentation
function.
Play Settings
EL
This screen lets you make settings for the
slide show function and for automatic
display and playback of still image and
video files.
Auto Play
This setting specifies whether still image/
video file playback should start
automatically when the display in which
the BKM-FW50 is installed is turned on. In
combination with the ON timer of the
display, this also allows automatic playback
at a scheduled time.
To enable the funciion, select the “On”
setting. From the “Contents” drop-down
list, select either “Streaming” (automatic
playback of still image/video files stored on
a computer on the network) or “Local”
(automatic playback of still image/video
files stored on a CF card inserted in the
BKM-FW50). “On” is selected as the
factory default.
Slide Show
The following items can be set for the slide
show function.
Interval:
Specifies the time interval until
switching to the next still image or
video.
Background Music:
Lets you specify background music to
be played during the slide show. Only
music files stored on a CF card inserted
in the BKM-FW50 can be used for this
function.
You can either enter the file name in
the text box, or enter the foider name,
click the “Browse” button, and specify
the file in the screen that appears.
a Rec MEC
Delete
Deletes a file or folder saved on the
memory card mserted in the unit.
Check to use background music
during video playback (video audio
will be muted):
When this check box is selected,
Background Music playback will be
available while any video files
contained in the slide show are played
back, but audio included in the video
files will be muted.
Check to display still pictures in High
Resolution Mode:
When this check box is selected, still
images are displayed at high resolution
(WXGA or XGA). If the folder
includes both video files and still
images, the screen turns off for several
seconds to switch resolution when
changing from a still image to a video
{and vice versa).
The following aspect ratios can be
selected for the input images.
16:9 (WXGA): View 16:9 images in
full screen display.
View 4:3 images on 4:3
normal screen.
AUTO: Automatically detects
the aspect ratio.
4:3 (XGA):
Computer Operation 17
Make selections based on the aspect
ratios of the images you wish to view.
When viewing still image files, we
recommend making the aspect ratios of
each file the same.
» When playing files with mixed aspect
ratios, black bars may appear on
either side of the display, or the image
may be stretched lengthwise.
Still images with aspect ratios other
than 16:9 or 4:3 can also be
displayed, but black bars may appear
at the top, bottom, and either side of
the display, or the image may be
stretched lengthwise.
When the BKM-FW50 1s connected
to a display, the RGB mode is set to
DTV mode. In DTV mode, the unit
automatically enters over scan mode,
and any text on the outer edges of an
image wili be cut off. For the FWD-
401 .X1/32LX1R/S0PX7, set the over
scan mode to OFF,
Standard Resolution Mode
(Default Values): 480P
input still image
Display »
”
+
Lai
A
16
Standard resolution
The input still image is converted to
standard resolution, and is enlarged
according to the aspect ratío of the dispiay.
Display: Full mode
Display
16
; Black bar
Display: Full mode
Display
16
The input still image is displayed in
the original aspect ratio.
18 | Computer Operation
High Resolution Mode: 16:9
(WXGA)
Input still image
Display
9 WXGA
16
Display: Full mode
Display
16
The input still image is displayed in
the original aspect ratio.
High resolution mode: 4:3 (XGA)
Input still image
Display
9 XGA
16
Display: Full mode
Display
16
The input still image is stretched
lengthwise but fills the entire screen.
Display: Normal mode
16
Black bar
The input still image is displayed in
the original aspect ratio.
19
Computer Operation
Video Resolution
Select NTSC (480p) or PAL {576p) as the
playback resolution for video.
Apply
Click here to save the settings.
Setup screen
PS
read IRA
NEA TROT
This screen lets you set up the Network
Password. The factory default settings are
as follows:
Name: root
Password: fw50ad
After you have made any changes or
entered mformation, click “Apply” at the
bottom of each screen to enable the settings.
Special characters cannot be used in the
text fields.
Owner Information
Owner
Enter owner information here.
Display Location
Enter information about the display
installation location here.
Do not use spaces when entering the
information. Doing so may cause the file
name to display incorrectly.
Memo
You can enter auxiliary information here.
20 Computer Operation
Time
Time
Enter the time and the day of the week
here.
Network
Internet Protocol (TCP/IP)
Select “Specify an IP address” to enter each
value in the IP address's numeric string.
Select “Obtain an IP address (DHCP) to
acquire an IP address automatically from
the DHCP server. In this case, he aware
that the IP address will change each time
the display attached to the BKM-FW30 is
turned on.
Ea
The BKM-FW50 requires a separate IP
address for the display control function and
the still image/video playback function.
The IP address for the display control
function can be set from the menu of the
display attached to the BKM-FW50. For
details, see “Setting an IP address for the
display control function” on page 9.
Password
The administrator and user name and
password information can be entered here.
The administrator name 1$ fixed to “root”.
Each can be a maximum of 8 characters
long.
Once a user name and password are set, the
“Network Password” screen appears
whenever the display control screen of the
BKM-FW50 is called up. To ensure
security on the network, setting a user name
and password is recommended.
Mail Report
When a display function error has occurred,
an error report is immediately sent by e-
mail {error notification).
However, there is no error notification
when an error occurs with the Player.
Address
Enter the target e-mail address here. Up to
four addresses can be specified, for
simultaneous sending of an error report.
The maximum length for each address is 64
characters.
Mail Account
Mail Address:
Enter the allocated mail address here.
The maximum length for the address is
64 characters.
Outgoing Mail Server (SMTP):
Enter the mail server address here.
The maximum length for the address is
64 characters.
Requires the use of POP
Authentication before Send e-mail
(POP before SMTP):
If POP authentication is required when
connecting to the SMTP server, select
this check box.
Ingoing Mail Server (POP3):
When POP authentication is used for
the “POP before SMTP” setting, enter
the POP3 server address here.
Account Name:
Enter the mail account name here.
Password:
Enter the mail password here.
Send Test Mail:
To test whether mail can be sent
successfully to the specified
address(es), select this check box and
click “Apply”. A test mail will be sent.
If any of the following items is not set or
not set correctly, an error message appears,
and test mail cannot be sent:
* Target address
Mail account address and mail server
address (SMTP)
Advanced
Gives access to advanced settings to enable
use of various applications on the network.
Make the settings as required by the
respective application.
Advertisement
Lets you make settings for the
Advertisement and Broadcast functions on
the network.
ID Talk
Lets you make settings for the ID Talk
function. ID Talk is a protocol that allows
network-based control of the display in
which the BKM-FW50 is installed.
Controlled items includes various settings
and adjustments such as color temperature
and gamma. For information about
supported ID Talk commands, contact your
local Sony dealer.
SNMP
The BKM-FW50 1s a network device which
supports SNMP {Simple Network
Management Protocol). Besides standard
MIB-II, Sony Enterprise MIB is also
supported. This screen allows making
settings for SNMP.
For information about supported SNMP
commands, contact your local Sony dealer.
Returning to default settings
To reset all settings made on the Setup
screen to the factory default condition, use
a thin pointed object to press and hold the
RESET button on the front panel of the unit
(page 5) for at feast 3 seconds.
Computer Operation | 21
Troubleshooting
Before requesting service, please check the following points. If the problem persists, contact
your local Sony dealer.
Problem Cause/Remedy
Cannot connect to network. + BKM-FWS50 is not correctly installed in
display,
— Push the BEKM-FW50 fully into the slot,
and tighten the fastening screws.
+ Cable is not connected correctly to network
port.
— Plug the cable firmly into the network port.
* Network settings are incorrect.
— When using a web browser from the
computer, check the network settings of the
computer.
Press and hold the RESET button of the
BKM-FWS5S0 for at least 3 seconds to return
the unit to the default condition. Then
perform setup again.
+ Cable type is incorrect.
— Select a straight cable or a cross-wired
cable, as required by the network
environment.
Storage medium is not recognized. » The storage medium is broken.
— Try using a different storage medium.
» The storage medium being used 15 not
compatible.
—» Try using a storage medium from another
maker.
Cannot playback files saved on * The file formats are incorrect.
the storage medium. —» Change the files to the appropriate format.
* There are over 1,000 files saved on the storage
medium.
— Remove files until the number of files does
not exceed 1,000.
+ There is a file exceeding 2 GB in size.
— Make sure no file exceeds 2 GB in size.
» The storage medium 15 broken.
— Try using a different storage medium.
22 | Troubleshooting
Problem
Cause/Remedy
Cannot save files from a server to
local storage.
« A storage medium is not inserted in the BKM-
FWa0.
— Insert a storage medium.
* The storage medium is broken.
—+ Try using a different storage medium.
* There is a problem with the network
environment.
— Confirm the network settings.
Streaming playback is unavailable.
* There is a problem with the network
environment.
—+ Confirm the network settings.
— There may be a high amount of network
traffic. Change the network settings for
optimal performance.
* The file formats are incorrect.
— Change the files to the appropriate format.
The display control screen
(the Web screen displaying the
unit’s GUI) does not display.
+ Click the refresh or reload button on your Web
browser.
+ Make sure the IP address 15 correct.
» Use Internet Explorer 6.0 or later.
Troubleshooting] 23
When an error occurs while using the BKM-FWS50, an error code along with error
information is displayed on the Information screen {page 11).
The following explains the meanings of error codes and the methods of dealing with them.
Error code | When it occurs What it means How to deal with it
(Hex)
0x10 The specified file/foider Make sure the file/foider
does not exist, you specified exists.
It may also be that there is | Or, move the contents of
an “index.html” file within | the folder to a folder that
the specified folder. does not contain an
“index.html” file, and
specify that folder.
Oxil The specified file is of an | Confirm the extension of
extension not supported by | the file you specified.
the BKM-FWS50.
Playable file extensions
include (not case-
sensitive):
Video: mpg, m2v, mpeg
Still image: gif, png,
bmp, jpe, ipg, тре
Streaming Play P JP Ibe. PTE
Ox12 The specified folder does | Make sure a file with the
not contain a playable file. | appropriate extension
exists in the folder.
{x13 The specified file is of a Confirm the format of the
non-playable format. file.
x14 The specified file (within a | Check the file.
folder) is damaged.
0x15 The specified MPEG file | Check the file.
(within a folder) 1s an
MPEGI file.
Ox16 À network error has Check the network
occurred. environment.
0x20 An error has occurred with | Contact your local Sony
the Player during playback. | dealer.
0x30 The specified file/folder Make sure a CF card is
does not exist. inserted 1n the memory
card siot.
Local Play Also, make sure the file/
folder exists at the location
you specified.
24 Troubieshooting
Error code
When it occurs
What it means
How to deal with it
(Hex)
0x31 The specified file is of an | Confirm the extension of
extension not supported by | the file you specified.
the BKM-FW50.
Playable file extensions
include (not case-
sensitive):
Video: mpg, m2v, mpeg
Still image: gif, png,
bmp, jpe. jpg. jpeg
0x32 The specified folder does | Make sure a file with the
not contain a playable file. | appropriate extension
Local Play > exists in the folder.
0x33 The specified file is of a Check the format of the
non-playable format. file,
0x34 The specified file (within a | Check the file.
folder) is damaged,
0x35 The specified MPEG file | Check the file.
(within a folder) is an
MPEG] file.
0x40 An error has occurred with | Contact your local Sony
the Player during playback. | dealer.
0x50 The specified file/folder Make sure the file/folder
does not exist in the exists at the location you
specified server. specified.
It may also be that there is | Or, move the contents of
an “index.html” file within | the folder to a folder that
the specified folder. does not contain an
“index html” file, and
specify that folder.
0x51 The folder in the specified | Make sure a file with the
server does not contain a — | appropriate extension
downloadable file. exists in the folder.
0x52 The specified file is of an | Confirm the extension of
Store Local extension not supported by | the file you specified.
the BKM-FW50.
Playable file extensions
include (not case-
sensitive);
Video: mpg, m2v, mpeg
Still image: gif, png,
bmp, jpe, jpg, jpeg
0x53 The specified folder does | Make sure a CF card is
not exist on the CF card.
inserted in the memory
card slot,
Also, check the folders on
the CF card.
Troubleshooting 25
Error code | When it occurs What it means How to deal with it
(Hex)
0x54 A network error has Check the network
occurred. environment.
0x55 The storage capacity on the | Check the remaining
CF card is insufficient. storage capacity of the CF
card.
Also, delete any
unnecessary files/folders
on the CF card.
0x56 The file/folder specified to | Make sure the specified
Store Local | be deleted does not exist. | file/folder exists on the CF
card.
0x57 The file specified to be Before specifying to delete
deleted is currently being | a file, make sure the file is
accessed. closed.
0x58 The path specified to This error occurs when a
create a new folder is new folder that does not
incorrect, exist 1s specified. Confirm
the new folder.
0x70 A connection error has Make sure that the server is
occurred. running and that the
(The server does not exist, | network environment is
cannot connect to the functioning.
PC Presentation | network, etc.)
0x71 The user name and Make sure the user name
password entered are and password match the
incorrect. ones registered on the
server.
20 |Troubleshooting
Specifications
Input/output
Network 10BASE-T/100BASE-
TX (connection
speeds may differ,
depending on the
network environment)
Memory card slot CF Type H
USB Type A
General
Dimensions (including projecting parts)
135 x 32 x 95 mm
(SAX 1A6X 3 Ya
inches) (W/H/D)
Mass Approx. 300 g
(10.6 0z.)
Power consumption
Approx. 10 W
Operating temperature
0 to +35°C
{+32 to +95°F)
(environment
conditions for display
in which BKM-FW50
is installed)
Storage temperature
—10 to +40%C
(+14 to +104°F)
LED indicators — Link (green)/
Act (orange)
Cable length Max. 100 m
(Category 5)
Design and specifications are subject to
change without notice.
Specifications 27
http: //www.sony.net/
Sony Corporation

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Wired
  • USB
  • 100 Mbit/s

Related manuals

Download PDF

advertisement