Sony DR-BT22 User manual

Sony DR-BT22 User manual
3-268-834-11(1)
Wireless Stereo
Headset
Operating Instructions
DR-BT22
© 2007 Sony Corporation
01GB00COV-CEK.p65
1
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
WARNING
To reduce the risk of fire or electric
shock, do not expose this
apparatus to rain or moisture.
To reduce the risk of electrical
shock, do not open the cabinet.
Refer servicing to qualified
personnel only.
Do not install the appliance in a confined
space, such as a bookcase or built-in
cabinet.
To reduce the risk of fire, do not cover the
ventilation of the apparatus with
newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the
apparatus.
Use of this radio equipment is not allowed
in the geographical area within a radius of
20 km from the centre of Ny-Alesund,
Svalbard in Norway.
The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Sony Corporation is
under license.
Other trademarks and trade names are
those of their respective owners.
MPEG Layer-3 audio coding technology
and patents licensed from Fraunhofer IIS
and Thomson.
To reduce the risk of fire or electric
shock, do not place objects filled with
liquids, such as vases, on the apparatus.
Connect the AC power adaptor to an
easily accessible AC outlet. Should you
notice an abnormality in the AC power
adaptor, disconnect it from the AC outlet
immediately.
Do not expose the battery to excessive
heat such as direct sunlight, fire or the
like.
Excessive sound pressure from
headphones can cause hearing loss.
Hereby, Sony Corp., declares that this
equipment is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC.
For details, please access the following
URL :
http://www.compliance.sony.de/
2
01GB01TOC-CEK.p65
2
DR-BT22_CEK, CED [GB]
3-268-834-11(1)
23/5/07, 9:09 AM
Disposal of Old
Electrical &
Electronic
Equipment
(Applicable in the
European Union and
other European
countries with
separate collection
systems)
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
environment and human health, which
could otherwise be caused by
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about
recycling of this product, please contact
your local Civic Office, your household
waste disposal service or the shop where
you purchased the product.
Table Of Contents
What is Bluetooth wireless
technology? .................. 4
Welcome! .......................... 5
3 steps to Bluetooth function .... 6
Location and Function of
Parts ............................... 7
Folding and unfolding the
headset .................................. 8
Charging the unit ............. 9
Pairing ............................. 11
What is pairing? ...................... 11
Procedures of pairing .............. 11
Wearing the headset ...... 13
Indications of Bluetooth
function ....................... 14
Listening to music ......... 15
Controlling the audio device –
AVRCP ............................... 16
Calling ............................. 17
Controlling the Bluetooth mobile
phone – HFP, HSP .............. 19
Calling while playing
back music .................. 20
Disposing of the unit ..... 21
Precautions .................... 22
Troubleshooting ............. 24
Initializing the unit ......... 26
Specifications ................. 27
3
01GB01TOC-CEK.p65
3
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
What is Bluetooth wireless
technology?
Bluetooth™ wireless technology is
a short-range wireless technology
that enables wireless data
communication between digital
devices, such as a computer or
digital camera. Bluetooth wireless
technology operates within a range
of about 10 meters (about 30 feet).
Connecting two devices as
necessary is common, but some
devices can be connected to
multiple devices at the same time.
You do not need to use a cable for
connection, nor is it necessary for
the devices to face one another, such
is the case with infrared technology.
For example, you can use such a
device in a bag or pocket.
Bluetooth standard is an
international standard supported by
thousands of companies all over the
world, and employed by various
companies worldwide.
Communication System
and Compatible Bluetooth
Profiles of this unit
Profile is standardization of the
function for each Bluetooth device
specification. This unit supports the
following Bluetooth version and
profiles:
Communication System :
Bluetooth Specification version 2.0
Compatible Bluetooth Profiles:
– A2DP (Advanced Audio Distribution
Profile): Transmitting or receiving
audio content of high-quality.
– AVRCP (Audio Video Remote Control
Profile): Controlling A/V equipment;
pausing, stopping, starting playback,
volume control, etc.
– HSP (Headset Profile)*: Talking on the
phone/Operating the phone.
– HFP (Hands-free Profile)*: Talking on
the phone/Operating the phone by
hands-free.
* When you use a Bluetooth mobile
phone supported by both HFP (Handsfree Profile) and HSP (Headset Profile),
set to HFP.
Notes
• To be able to use the Bluetooth
function, the Bluetooth device to be
connected requires the same profile as
the unit’s.
Note also that even if the same profile
exists, devices may vary in function
depending on their specifications.
• Due to the characteristic of Bluetooth
wireless technology, the sound played
on this unit is slightly delayed from the
sound played on the Bluetooth device
during talking on the telephone or
listening to the music.
4
01GB02FEA-CEK.p65
4
DR-BT22_CEK, CED [GB] 23/5/07,
3-268-834-11(1)
9:09 AM
Welcome!
Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses
Bluetooth wireless technology.
• Enjoy music wirelessly with Bluetooth music player such as Bluetooth
mobile phone, Bluetooth digital music player, or digital music player
connected to the Bluetooth transmitter.*1
• Hands-free conversation can be enjoyed on your Bluetooth mobile phone
without taking it out of your bag.*2
• For convenience, you can remotely operate the basic functions of a
Bluetooth music player (Play, Stop, etc.).*3
• Useful rechargeable function.
• Convenient foldable type for easy carrying.
For details on Bluetooth wireless technology, see page 4.
Listening to music
Talking on the phone
*1 The connected Bluetooth device is required to support A2DP (Advanced Audio
Distribution Profile).
*2 The connected Bluetooth device is required to support HSP (Headset Profile) or HFP
(Hands-free Profile).
*3 The connected Bluetooth device is required to support AVRCP (Audio Video Remote
Control Profile).
01GB02FEA-CEK.p65
5
5
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
3 steps to Bluetooth function
Pairing
First, register (“pair”) a Bluetooth device (mobile phone, etc.) and this
unit with each other. Once pairing is established, there is no need for
pairing again.
Bluetooth
mobile phone,
etc.
Wireless Stereo
Headset
Pairing
c Page 11
V
V
Listening to music
Calling
Bluetooth connection
Bluetooth connection
Operate the Bluetooth device to
make the Bluetooth connection.
When the unit is turned on, the
unit starts making the Bluetooth
connection to the recognized
mobile phone automatically.
Connection
A2DP
AVRCP
Connection
c Page 15
V
HFP
HSP
c Page 17 - 18
Listening to music
You can listen to music played on
the Bluetooth device.
Playback, stop, or pause is
possible from this unit.
V
Talking on the phone
You can make and receive a call
by operating this unit.
Music
Voice
6
01GB02FEA-CEK.p65
c Page 15 - 16
6
c Page 18 - 20
DR-BT21G_CEK [GB] 3-095-524-11(1)
NEW CID
23/5/07, 9:09 AM
GETTING STARTED
Location and Function of Parts
qg
qf
L
R
7
8
9
0
qd
qs
qa
1 R (right) indication
2 Right (R) unit
3 Multi function button
Controls various call functions.
4 POWER button
5 Microphone
6 RESET button
Push this button when this unit
does not operate properly.
Pairing information is not
deleted by this operation.
7 VOL (volume) +*⁄–
buttons
8 Indicator (blue)
Indicates the communication
status of the unit.
01GB03GET-CEK.p65
7
1
2
3
4
5
6
9 Indicator (red)
Indicates the power status of
the unit.
0 Jog switch
Controls various functions
when listening to music.
qa
qs
qd
qf
qg
Ear pad
DC IN 3 V jack
Left (L) unit
L (left) indication
Headband
* This button has a tactile dot.
7
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Folding and unfolding the headset
Unfolding
Folding
1 Unfold the left unit of
1 Hold near the foldable
the headband as
illustrated.
part with both hands
and lift up the right unit
to fold it as illustrated.
2 Expand the center part
of the headband.
2 Close the center part of
the headband.
3 Unfold the right unit of
the headband.
3 Fold the left unit of the
headband.
Notes
• Do not pull open this way.
• Be careful not to hit your face or eyes
with the top of the headband.
8
01GB03GET-CEK.p65
8
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Charging the unit
The unit contains a rechargeable Lithium-Ion battery, which should be
charged before using for the first time.
1 Connect the supplied
2 Make sure that indicator
AC power adaptor to the
DC IN 3 V jack on the
unit.
To an
AC outlet
(red) lights up while
charging.
Wireless Stereo
Headset
To DC IN
3 V jack
AC power
adaptor
(supplied)
When the AC power adaptor is
connected to an AC outlet,
charging starts.
Tips
• If the AC power adaptor is
connected to an AC outlet while the
unit is turned on, the unit will be
turned off automatically.
• This unit cannot be turned on while
charging.
01GB03GET-CEK.p65
9
Charging is completed in about
3 hours* and the indicator (red)
goes off automatically.
* Time required for empty battery to
recharge.
Caution
If this unit detects a problem while
charging, the indicator (red) may
turn off, although charging is not
complete.
Check for the following causes:
– Ambient temperature exceeds the
range of 0 °C – 40 °C (32 °F –
104 °F).
– There is a problem with the
battery.
In this case, charge again within the
above-mentioned temperature range.
If the problem persists, consult your
nearest Sony dealer.
Continued
9
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Notes
• If the battery is not used for a long time,
battery may be quickly depleted,
however, after a few recharges, battery
life will improve.
• If the life of the built-in rechargeable
battery drops to half the normal length,
the battery should be replaced. Consult
your nearest Sony dealer for
replacement of the rechargeable battery.
• Avoid exposure to temperature
extremes, direct sunlight, moisture,
sand, dust or mechanical shock. Never
leave in a car parked in the sun.
• Use only the supplied AC power
adaptor. Do not use any other AC
power adaptor.
Usage hours*
Checking the remaining
battery
When pressing the POWER button
while the unit is turned on, the
indicator (red) flashes. You can
check the remaining battery by the
number of times the indicator (red)
flashes.
Indicator (red)
Status
3 times
Full
2 times
Mid
1 time
Low (needs to
charge)
Note
Status
Approx.
usage hours
Communication
time (including
music playback
time) (up to)
11 hours
Standby time
(up to)
100 hours
You cannot check the remaining battery
immediately after the unit is turned on, or
while pairing.
When the battery is almost empty
The indicator (red) flashes slowly
automatically.
When the battery becomes empty, a
beep sounds and the unit will turn
off automatically.
* Time stated above may vary, depending
on ambient temperature or conditions of
use.
10
01GB03GET-CEK.p65
10
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Pairing
What is pairing?
Procedures of pairing
Bluetooth devices need to be
“paired” with each other
beforehand.
Once Bluetooth devices are paired,
there is no need for pairing again,
except in the following cases:
• Pairing information is deleted
after repair, etc.
• This unit is paired with 9 or more
devices.
This unit can be paired with up to
8 devices; if a new device is
paired after 8 devices have been
paired, the device whose latest
connection time is the oldest
among the 8 paired devices is
replaced by the new one.
• When recognition of the unit by
the device to be connected is
deleted.
• This unit is initialized (page 26).
All pairing information is deleted.
1 Place the Bluetooth
device within 1 m (3 ft)
of this unit.
2 Press and hold the
POWER button for
7 seconds or more to
standby for pairing
while the unit is turned
off.
Notes
• After about 3 seconds, power is
turned on and the indicator (blue)
and indicator (red) flash together
twice. Keep the POWER button
pressed without releasing. The
indicator (blue) starts flashing.
When both indicators start flashing
together again, release the button.
This unit enters into pairing mode.
• If pairing is not established within
about 5 minutes, pairing mode will
be cancelled and this unit will turn
off. In this case, start over from
step 1.
Continued
01GB03GET-CEK.p65
11
11
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
3 Perform pairing
6 Start the Bluetooth
procedure on the
Bluetooth device to
detect this unit.
connection from the
Bluetooth device.
The list of detected devices
appears on the display of the
Bluetooth device. This unit is
displayed as “DR-BT22.”
If “DR-BT22” is not displayed,
repeat from step 1.
Notes
• For details, refer to the operating
instructions supplied with the
Bluetooth device.
• When pairing with a Bluetooth
device that cannot display a list of
detected devices or that has no
display, you may pair the device by
setting both this unit and the
Bluetooth device to pairing mode.
At this time, if passcode is set
besides “0000” on the Bluetooth
device, pairing cannot be done with
this unit.
This unit memorizes the device
as the last connected device.
Some Bluetooth devices may
connect with the unit
automatically when pairing is
complete.
Tips
• To pair with other Bluetooth devices,
repeat steps 1 to 5 for each device.
• To delete all pairing information, see
“Initializing the unit” (page 26).
4 Select “DR-BT22” on
the display of the
Bluetooth device.
5 If Passcode* input is
required on the display
of a Bluetooth device,
input “0000.”
Pairing is complete when the
indicator (blue) flashes slowly.
The message standing for
“Pairing complete” appears on
the display of some Bluetooth
devices.
* Passcode may be called “Passkey,”
“PIN code,” “PIN number,” or
“Password.”
12
01GB03GET-CEK.p65
12
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Wearing the headset
1 Unfold the headset
according to the
procedures on page 8,
then extend the headset
to adjust the length.
2 Put the unit with L
indication on your left
ear and R indication on
your right ear, then
place the headset over
your head.
13
01GB03GET-CEK.p65
13
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Indications of Bluetooth function
B : Indicator (blue)
R : Indicator (red)
B
R
Connectable
– –
B
R –
– –
– –
– –
– –
...
Connecting
B
R
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
...
...
Phone
Music
Connected
Pairing
Flashing patterns
Searching
Connecting
Status
HFP/HSP or A2DP B
(standby for receiving audio signal)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
– ...
– ...
– – – – – – – – –
– – – – – ...
–
–
R –
HFP/HSP and A2DP B
– – – – – – –
– – – ...
(standby for receiving audio signal)
R –
Listening
B
R –
– – – – – – – –
– – – – ...
Listening during standby B
for telephone call
R –
– – – – – – –
– – – ...
...
Incoming call
B
R –
Talking
B
R –
– – – – – – – –
– – – – ...
Calling while
B
playing back music
R –
– – – – – – –
– – – ...
14
01GB03GET-CEK.p65
14
DR-BT22_CEK, CED [GB]
3-268-834-11(1)
23/5/07, 9:09 AM
OPERATING THE UNIT
Listening to music
When not calling with this unit, do
not make the last connected
Bluetooth device ready for HFP or
HSP connection. To make or
receive a call while playing back
music, see page 20.
VOL + button
VOL – button
POWER button
2 Make the Bluetooth
connection (A2DP) from
a Bluetooth device to
this unit.
Check the following before
operating the unit.
– The Bluetooth device is turned
on.
– Pairing of this unit and the
Bluetooth device is complete.
– The Bluetooth device supports the
transmitting music function
(profile: A2DP*).
1 Press and hold the
POWER button for
about 3 seconds while
the unit is turned off.
The indicator (blue) and
indicator (red) flash together
twice and the unit is turned on.
Notes
• Do not press and hold the POWER
button for more than 7 seconds,
otherwise pairing mode is entered.
• After the unit is turned on, the unit
attempts to connect to the last
connected Bluetooth device
automatically with HFP or HSP.
Refer to the operating
instructions supplied with the
Bluetooth device on how to
operate it.
3 Start playback on the
Bluetooth device.
Tip
Bluetooth connection of A2DP
(Advanced Audio Distribution Profile)
can also be operated with the jog switch
from this unit to the Bluetooth device
except when making a call on this unit.
Notes
• When you play music by connecting the
unit to a Bluetooth device using HSP
(Headset Profile), sound quality will not
be high. For better sound, change the
Bluetooth connection to A2DP by
operating the Bluetooth device.
• If this unit is turned off while an A2DP
Bluetooth connection is established,
operate the unit again from step 1 to
make the A2DP Bluetooth connection
again.
* For detail on profiles, see page 4.
Continued
01GB04OPE-CEK.p65
15
15
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
To adjust the volume
Press the VOL + or – button while
listening to the music.
Tips
• Depending on the connected device, it
may be necessary to adjust the volume
on the connected device as well.
• Volume for calling and listening to
music can be adjusted independently.
Even if you change the volume while
calling, the volume for music playback
does not change.
Controlling the audio
device – AVRCP
If the Bluetooth audio device
connected with this unit supports
AVRCP (Audio Video Remote
Control Profile), you can control by
using the unit buttons.
Refer to the operating instructions
supplied with the Bluetooth device
on how to operate it.
Note
To stop use
1 Terminate the Bluetooth
connection by operating
the Bluetooth device.
2 Press and hold the
POWER button for
about 3 seconds.
The indicator (blue) and
indicator (red) light up together,
and the unit turns off.
Operation of the Bluetooth connecting
device by this unit will vary depending on
its specification.
Status: In stop or pause mode
Short Press Long Press
Nx
1
2
FF / REW
3
4
1
2
3
4
Starts playback*1
Stop
Skip to next/previous
Fast-forward/Fast-rewind*2
Status: In play mode
Tip
When you finish playing music, the
Bluetooth connection may terminate
automatically, depending on the
Bluetooth device.
Short Press Long Press
Nx
5
6
FF / REW
7
8
5
6
7
8
Pause*1
Stop
Skip to next/previous
Fast-forward/Fast-rewind*2
*1 You may need to press the button
twice depending on the Bluetooth
device.
2
* Some Bluetooth devices may not
operate.
Note
You cannot adjust the volume of the
Bluetooth device by the unit volume
buttons.
16
01GB04OPE-CEK.p65
16
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Calling
When this unit does not
connect to a Bluetooth
mobile phone automatically
VOL + button
You can make a connection by
operating Bluetooth mobile phone
or by operating this unit to connect
the last connected Bluetooth device.
VOL – button
Multi function
button
POWER button
Check the following before
operating the unit.
– The Bluetooth function is active
on the mobile phone.
– Pairing of this unit and the
Bluetooth mobile phone is
complete.
1 Press and hold the
POWER button for
about 3 seconds while
the unit is turned off.
The indicator (blue) and
indicator (red) flash together
twice, the unit turns on and then
this unit tries to connect to the
last Bluetooth mobile phone that
was used.
Note
Do not press and hold the POWER
button for more than 7 seconds,
otherwise pairing mode is entered.
Tip
This unit will stop trying to connect
to the Bluetooth mobile phone after 1
minute. In such a case, press the multi
function button to try to connect
again.
A To make a connection
by operating Bluetooth
mobile phone
1 Make the Bluetooth
connection (HFP or
HSP*) from the
Bluetooth mobile phone
to this unit.
Refer to the manual supplied
with your Bluetooth mobile
phone for operation details.
The list of recognized devices
appears on the display of the
Bluetooth mobile phone. This
unit is displayed as
“DR-BT22.”
When you use the Bluetooth
mobile phone features both HFP
(Hands-free Profile) and HSP
(Headset Profile), set to HFP.
Note
When connecting to a Bluetooth
mobile phone which is different from
the last connected one, make the
connection following the above
procedure.
* For details on profiles, see
page 4.
Continued
01GB04OPE-CEK.p65
17
17
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
B To make a connection
with the last connected
Bluetooth device by
operating this unit
1 Press the multi function
button.
– ring tone set on the unit
– ring tone set on the mobile
phone
– ring tone set on the mobile
phone only for Bluetooth
connection
Note
When listening to music with this unit, a
Bluetooth connection cannot be made
with the multi function button.
If you received a call by pressing the
button on the Bluetooth mobile phone,
some Bluetooth mobile phones may have
handset use priority. In this case, set to
talk with the unit by pressing and holding
the multi function button for about 2
seconds, or by operating the Bluetooth
mobile phone. For details, refer to the
manual supplied with your Bluetooth
mobile phone.
To call
To adjust the volume
1 Use the buttons on your
Press the VOL + or – button.
The indicator (blue) and
indicator (red) start flashing at
the same time, and the unit
performs the connection
operation for about 5 seconds.
Note
Tips
mobile phone when
making a call.
If no dial tone is heard on this
unit, press and hold the multi
function button for about 2
seconds.
Tip
• You cannot adjust the volume when not
communicating.
• Volume for calling and listening to
music can be adjusted independently.
Even if you change the volume while
playing back the music, the volume of a
call does not change.
You can call in the following way,
depending on the Bluetooth mobile
phone. Refer to the manual supplied with
your mobile phone on operating details.
– When not communicating, you can call
using the voice-dial function by
pressing the multi function button.
– You can call the last dialed number by
pressing the multi function button for
about 2 seconds.
To terminate a call
To receive a call
2 Press and hold the
When an incoming call arrives, a ring
tone will be heard from the unit.
1 Press the multi function
button on the unit.
18
01GB04OPE-CEK.p65
The ring tone differs in the
following ways, depending on
your mobile phone.
18
You can end a call by pressing the
multi function button on the unit.
To stop use
1 Terminate Bluetooth
connection by the
Bluetooth mobile phone.
POWER button for about
3 seconds to turn off the
power.
The indicator (blue) and
indicator (red) light up together,
and the unit turns off.
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Controlling the
Bluetooth mobile
phone – HFP, HSP
The operation of the buttons on this
unit varies depending on your
mobile phone.
HFP (Hands-free Profile) or HSP
(Headset Profile) is used for
Bluetooth mobile phone. Refer to
the operating instructions supplied
with your Bluetooth mobile phone
on supported Bluetooth profiles or
how to operate.
*1 Some functions may not be supported
depending on the Bluetooth mobile
phone. Refer to the operating
instructions supplied with your mobile
phone.
2
* This may vary, depending on the
Bluetooth mobile phone.
*3 Some functions may not be supported
when calling using the Bluetooth
mobile phone.
HFP (Hands-free Profile)
Status
Multi function button
Short Press
Long Press
Start Voice
Dial*1
Last number
redial
Cancel Voice
Dial*1
–
Outgoing call End outgoing
call
–
Standby
Voice Dial
active
Incoming call
Answer
Reject
During call
End call
Change call
device
HSP (Headset Profile)
Status
Standby
Multi function button
Short Press
Long Press
–
Dial*1
Outgoing call End outgoing End outgoing
call*1
call or change
call device to
headset*2
Incoming call
During call
Answer
–
End call*3
Change call
device to
headset
19
01GB04OPE-CEK.p65
19
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Calling while playing back music
The Bluetooth connection using HFP or HSP as well as A2DP is necessary
to make a call while playing back music.
For example, to make a call using a Bluetooth mobile phone while listening
to music on a Bluetooth compatible music player, this unit needs to be
connected to the mobile phone using HFP or HSP.
Make a Bluetooth connection between this unit and the
device in use following the procedures outlined below.
1 Make a Bluetooth connection between this unit and
the mobile phone in use with HFP or HSP following
the procedures outlined in “Calling” (see page 17).
2 Operate the Bluetooth device (music player or mobile
phone) used for playing the music to make a
Bluetooth connection to this unit using A2DP.
To make a call while
playing back music
To receive a call while
playing back music
1 Press the multi function
When an incoming call arrives, the
music pauses and the ring tone is
heard from this unit.
button while playing
back music (page 19), or
operate your Bluetooth
mobile phone to make a
telephone call.
If no dial tone is heard on this
unit, press and hold the multi
function button for about 2
seconds.
1 Press the multi function
button and talk.
After finishing the call, press the
multi function button. This unit
is switched back to music
playback.
When no ring tone is heard
even if an incoming call
arrives
1 Stop music playback.
2 When ringing, press the
multi function button
and talk.
20
01GB04OPE-CEK.p65
20
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
ADDITIONAL INFORMATION
Disposing of the unit
This unit has a Lithium-lon rechargeable battery built in the left unit.
For environmental conservation, be sure to remove the built-in rechargeable
battery from the unit before disposing, and dispose of the battery
appropriately.
1 Remove the ear pad on
the left unit, and then
detach the left unit.
The unit is fixed with claws (3
places). As illustrated, insert an
object such as flathead
screwdriver into the gap and lift
up the unit to detach it.
the claws in the arrow
direction as illustrated to
remove the circuit board.
3 Lift the circuit board and
detach.
1
2
3
Left
housing
2
Rechargeable
battery
Claws
2 Remove the screw
which fixes the external
cover.
4 Pull out the connector
and remove the
rechargeable battery.
The rechargeable battery is fixed
with adhesive tape. Insert an
object such as flathead
screwdriver and lift up the
battery to remove it.
Fixed screw
3 Open the external cover
and remove the inside
circuit board.
1 The external cover can be
detached by hand.
2 The circuit board is fixed
with claws (2 places). Push
2
1
21
01GB05ADD-CEK.p65
21
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Precautions
On Bluetooth communication
• Bluetooth wireless technology operates
within a range of about
10 meters (about 30 feet).
Maximum communication range may
vary depending on obstacles (person,
metal, wall, etc.) or electromagnetic
environment.
• The aerial of this unit is built into the
right unit as illustrated in the dotted
line. The sensitivity of Bluetooth
communication will improve by placing
a connected Bluetooth device on your
right side.
The communication distance shortens
when the obstacles are between the
aerial of the connected device and this
unit.
•
•
•
•
Location of
built-in aerial
22
• The following conditions may affect the
sensitivity of Bluetooth communication.
– There is an obstacle such as a person,
metal, or wall between this unit and
Bluetooth device.
– A device using 2.4 GHz frequency,
such as a wireless LAN device,
cordless telephone, or microwave
oven, is in use near this unit.
• Because Bluetooth devices and wireless
LAN (IEEE802.11b/g) use the same
frequency, microwave interference may
occur and resulting in communication
speed deterioration, noise, or invalid
connection if this unit is used near a
wireless LAN device. In such as case,
perform the following.
– Use this unit at least 10 m (about
30 ft) away from the wireless LAN
device.
01GB05ADD-CEK.p65
22
•
– If this unit is used within 10 m (about
30 ft) of a wireless LAN device, turn
off the wireless LAN device.
– Install this unit and Bluetooth device
as near to each other as possible.
Microwaves emitting from a Bluetooth
device may affect the operation of
electronic medical devices. Turn off
this unit and other Bluetooth devices in
the following locations, as it may cause
an accident.
– where inflammable gas is present, in
a hospital, train, airplane, or a petrol
station
– near automatic doors or a fire alarm
This unit supports security capabilities
that comply with the Bluetooth standard
to provide a secure connection when the
Bluetooth wireless technology is used,
but security may not be enough
depending on the setting. Be careful
when communicating using Bluetooth
wireless technology.
We do not take any responsibility for
the leakage of information during
Bluetooth communication.
Connection with all Bluetooth devices
cannot be guaranteed.
– A device featuring Bluetooth function
is required to conform to the
Bluetooth standard specified by
Bluetooth SIG, and be authenticated.
– Even if the connected device
conforms to the above mentioned
Bluetooth standard, some devices
may not be connected or work
correctly, depending on the features
or specifications of the device.
– While talking on the phone hands
free, noise may occur, depending on
the device or communication
environment.
Depending on the device to be
connected, it may require some time to
start communication.
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
On the supplied AC power
adaptor
• Use the AC power adaptor supplied
with this unit. Do not use any other AC
power adaptor since it may cause the
unit to malfunction.
• The ear pads are consumable. They may
deteriorate due to long-term storage or
use. Replace with new ones if they are
damaged.
• If you have any questions or problems
concerning this unit that are not covered
in this manual, please consult your
nearest Sony dealer.
Polarity of the plug
• If you are not going to use this unit for
a long time, unplug the AC power
adaptor from the AC outlet. To remove
the AC power adaptor from the wall
outlet, grasp the adaptor plug itself;
never pull the cord.
Others
• Do not place this unit in a place
exposed to humidity, dust, soot or
steam, subject to direct sunlight, or in a
car waiting at a traffic signal. It may
cause a malfunction.
• Be careful not to pinch your fingers
when folding the headset.
• Using the Bluetooth device may not
function on mobile phones, depending
on radio wave conditions and location
where the equipment is being used.
• If you experience discomfort after using
the Bluetooth device, stop using the
Bluetooth device immediately. Should
any problem persist, consult your
nearest Sony dealer.
• Listening with this unit at high volume
may affect your hearing. For traffic
safety, do not use this unit while driving
or cycling.
• Do not put weight or pressure on this
unit as it may cause the unit to deform
during long storage.
23
01GB05ADD-CEK.p65
23
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Troubleshooting
If you run into any problems using this unit, use the following checklist and
read the product support information on our website.
Should any problem persist, consult your nearest Sony dealer.
Common
The unit is not turned on.
, Charge the battery of the unit.
, The unit is not turned on while
charging. Unplug the unit from AC
power adaptor and then turn on the
unit.
Pairing cannot be done.
The correspondence
distance is short. (Sound
skips.)
, If a device that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth
device(s), or a microwave oven is
nearby, move away from such
sources.
The unit does not operate
properly.
, Bring this unit and the Bluetooth
device closer together.
Cannot make the Bluetooth
connection.
, Check that this unit is turned on.
, Check that the Bluetooth connecting
device is turned on and the Bluetooth
function is on.
, Connection with the Bluetooth device
may not be memorized on this unit.
Make the Bluetooth connection from
the Bluetooth device to this unit soon
after pairing is complete.
, This unit or Bluetooth connecting
device is in sleep mode.
, The Bluetooth connection is
terminated. Make the Bluetooth
connection again (when listening to
music: see page 15, when calling: see
page 17).
, Reset the unit. Pairing information is
not deleted by this operation.
Insert a small pin, etc., into the hole,
and push until you feel a click.
When listening to
music
No sound
Distorted sound
, Ensure that this unit is not receiving
interference from a wireless LAN,
other 2.4 GHz wireless device, or
microwave oven.
, Check that both this unit and the
Bluetooth device are turned on.
, A2DP Bluetooth connection is not
made between this unit and the
Bluetooth device. Make an A2DP
Bluetooth connection (page 15).
, Check that music is being played
back by the Bluetooth device.
24
01GB05ADD-CEK.p65
24
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
, Check that the volume of the unit is
not set too low.
, Turn up the volume on the connected
device if necessary.
, Pair this unit and Bluetooth device
again (page 11).
Low sound level
, Turn up the volume of this unit.
, Turn up the volume on the connected
device if necessary.
Low sound quality
, Switch the Bluetooth connection to
A2DP (Advanced Audio Distribution
Profile) when HSP (Headset Profile)
is set.
Cannot make the Bluetooth
connection from Bluetooth
device to this unit.
, The Bluetooth device is not equipped
with SCMS-T content protection*.
With the unit turned off, press and
hold POWER and Nx for about 7
seconds to deactivate the SCMS-T
protection. The indicator (blue)
flashes once.
* The SCMS-T content protection
method is one of the methods to
protect the contents transmitted on
the Bluetooth wireless technology.
This unit can receive the contents
protected by this method. Press and
hold the POWER button and Nx
again for about 7 seconds to
reactivate the SCMS-T content
protection method on this unit. The
indicator (blue) flashes twice.
Sound skips frequently
during playback.
, Reception condition of this unit may
have become unstable due to
improper matching of the bit-rate
setting for the music transmitted from
the Bluetooth device and the
environment in which this unit is
used. *1
Terminate A2DP Bluetooth
connection by operating the
Bluetooth device. While this unit is
turned on, press and hold Nx for
about 7 seconds to lower the setting
of receivable bit rate. *2
*1 Bit rate is a numerical value which
represents data transmission
volume per second. The higher the
bit rate, in general, the better
quality the sound will be. This unit
can receive high bit rate music but
sound skipping may occur
depending on the usage
environment.
2
* When bit rate setting is completed,
the indicator (blue) flashes once.
The above operations may not
reduce the sound skip depending on
the usage environment. To reset to
the original setting, press and hold
Nx again for about 7 seconds.
The indicator (blue) flashes twice.
When calling
The recipient’s voice
cannot be heard.
, Check that both this unit and the
Bluetooth mobile phone are turned
on.
, Check the connection between this
unit and the Bluetooth mobile phone.
Make a Bluetooth connection (HFP
or HSP) again (page 17).
, Check that output of the Bluetooth
mobile phone is set for this unit.
, Check that the volume of the unit is
not set too low.
, Turn up the volume on the connected
Bluetooth mobile phone if necessary.
, If you are listening to music using
this unit, stop playback, press the
multi function button and talk.
Low sound from recipient
, Turn up the volume of this unit.
, Turn up the volume on the connected
Bluetooth mobile phone if necessary.
25
01GB05ADD-CEK.p65
25
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Initializing the
unit
You can reset this unit to its default
(such as volume setting) and delete
all pairing information.
1 If this unit is turned on,
press and hold the
POWER button for
about 3 seconds to turn
off this unit.
2 Press and hold the
POWER button and
multi function button
together for about
7 seconds.
The indicator (blue) and
indicator (red) flash together
four times, and this unit is reset
to the default setting. All pairing
information is deleted.
26
01GB05ADD-CEK.p65
26
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Specifications
General
Headset
Communication System
Bluetooth Specification version 2.0
Power source
DC 3.7 V: Built-in lithium-ion
rechargeable battery
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (30 ft) *1
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS
Mass
Approx. 78 g (2.8 oz)
Rated power consumption
1.5 W
Receiver
Type
Open air, dynamic
Compatible Bluetooth Profiles*2
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
HSP (Headset Profile)
HFP (Hands-free Profile)
Driver unit
30 mm dome type
Supported Codecs*3
SBC*4, MP3
Type
Omni directional, electret condenser
Supported content protection
method
SCMS-T
Effective frequency range
100 – 4,000 Hz
Reproduction frequency range
14 – 24,000 Hz
Microphone
Design and specifications are subject to
change without notice.
Transmission range (A2DP)
20 - 20,000 Hz (Sampling frequency
44.1 kHz)
Supplied accessory
AC power adaptor (1)
Operating instructions (this book) (1)
*1 The actual range will vary depending
on factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
reception sensitivity, aerial’s
performance, operating system,
software application, etc.
*2 Bluetooth standard profiles indicate
the purpose of Bluetooth
communication between devices.
3
* Codec: Audio signal compression and
conversion format
*4 Subband Codec
01GB05ADD-CEK.p65
27
27
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
23/5/07, 9:09 AM
Printed in Malaysia
DR-BT22_CEK, CED [GB] 3-268-834-11(1)
01GB06BCO-CEK.p65
28
23/5/07, 9:09 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement