Pin and Sleeve Devices

Pin and Sleeve Devices
Pin and Sleeve Devices
Mechanical Interlocks
Index
Product
Page
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-2
Configurations Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-3
IEC Pin and Sleeve Watertight Devices
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-4
Watertight Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-6
Corrosion Resistant Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-8
Back Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-9
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-10
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-11
Listings and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-13
Specifications and Horsepower Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-14
Low Profile Pin and Sleeve Devices
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-15
Low Profile Devices and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-16
Low Profile Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-17
HBL® Watertight
IEC Pin & Sleeve
Pin and Sleeve Devices
Section E
Insulgrip® NEMA 4X
UL 1686 C1 Pin & Sleeve
Unfused Circuit-Lock® Mechanical Interlocks
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-18
Unfused Circuit-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-19
Accessories and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-20
Specifications and Horsepower Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-21
“Reverse Service” Unfused Circuit-Lock® Mechanical Interlocks
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-22
“Reverse Service” Unfused Circuit-Lock® Devices and Accessories . . . . . . .E-23
Specifications and Horsepower Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-24
Circuit-Lock® Unfused and
Fused Mechanical Interlocks
Fused Circuit-Lock® Safety Interlocks
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-25
Fused Circuit-Lock® Devices and Accessories . . . . . . . . . . . . . . . . . . . . . . . .E-26
Specifications and Horsepower Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-27
IEC Pin and Sleeve Terminal Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-28
UL 1686 C1 Insulgrip® Pin and Sleeve Devices
Style I and Style II Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-29
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-30
Insulgrip® Pin and Sleeve Devices - Style I and II . . . . . . . . . . . . . . . . . . . . . .E-32
“Reverse Service” Insulgrip® Pin and Sleeve Devices - Style I and II . . . . . . .E-33
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-34
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-35
Device Listings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-37
Back Boxes & Accessories
www.hubbell-wiring.com
Index
Insulgrip® Mechanical Interlocks
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-38
Insulgrip® Mechanical Interlocks - Style II, Fused and Unfused Devices . . . .E-39
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-40
E-1
Pin and Sleeve Devices
Pin and Sleeve Devices
Summary
Hubbell produces the highest quality
and most extensive Pin and Sleeve
offering.
Similar our Twist-Lock® devices, Hubbell’s Pin and
Sleeve line of plugs, connectors, inlets, receptacles,
mechanical interlocks and accessories are the highest
performing product available . The HBL® series of
IEC pin and sleeve and Insulgrip line are produced in
the USA and have a full list of innovative features .
IEC Watertight Devices
Provide safe and dependable
performance in the most
demanding environments . Heavy
duty non-conductive nylon
construction provides impact and
corrosion protection . Thermoset
polyester contact carriers withstand
high temperatures and provide
resistance to electrical tracking .
Summary
Insulgrip® NEMA 4X
UL 1686 C1 Devices
Metallic where you want it and
non-metallic where you need it .
This tough product line is NEMA
4X rated for use in the harshest
environments . The devices are
fully interchangeable with other
manufacturers of UL1686 C1
devices .
Back Boxes and Accessories
A complete line of metallic
and non-metallic back boxes,
angle adapters, closure caps
and liquidtight adapters are
available . These accessories help
complement the line and aid in
the installation of the product .
E-2
The IEC line of plugs and connectors are made with a
rugged super tough, one-piece housing . The thermoset
polyester contact carrier provides a high resistance to
electrical tracking . They withstand higher temperatures
which may result from overload or arcing . The heavyduty, external cord grip provides superior strain relief on
the conductors .
The Insulgrip line of pin and sleeve is listed UL Type 4X
which provides a watertight, dust-tight seal for harsh
environments . The non-metallic bodies of the plugs
and connectors provide excellent insulating, impact
and UV resistant properties . The patented beryllium
copper spring-pin design of the contacts maintains high
unit pressure on mating sleeves . This ensures reliable
electrical contact while minimizing heat rise . There are
two styles of Insulgrip pin and sleeve devices . Style I
devices achieve grounding by attaching the metallic
shell to a ground terminal within the device . Style II
devices feature redundant grounding by including an
additional ground pin and sleeve to the grounding
method used in Style I . The full Insulgrip line of devices
is interchangeable with other manufacturers of UL1686
C1 devices which makes it ideal for use in industrial
applications where multiple manufactures of product
may be present .
Both the IEC and Insulgrip lines of pin and sleeve are
used often in conjunction with mechanical interlocks .
Mechanical interlocks prevent users from mating or
breaking the circuit under load . This feature is critical to
maintain a safe electrical connection . The interlocks are
also available in reverse service applications where a
generator is providing power to an electrical system .
Circuit-Lock® Mechanical Interlocks
Hubbell’s Circuit-Lock enclosure
products virtually eliminate making
or breaking the circuit under load .
This revolutionary design incorporates
a disconnect switch and receptacle
in one compact non-metallic unit .
They are available in either a fused
or non-fused versions .
www.hubbell-wiring.com
Low Profile Devices
90° Angled plugs and recessed
receptacles allow for connections
in tight spaces . Cords can be
controlled easily along the wall .
The integrated cord grips limit
strain on terminals and prevent
strain on plugs and cables exiting
perpendicular from the wall .
Corrosion Resistant Devices
This superior grade of IEC and
Insulgrip devices are ideal for the
most demanding environments .
Nickel-plated brass on the IEC
and nickel-plated Tellurium copper
on the Insulgrip contacts prevent
corrosion and heat rise .
Reverse Service
Generators and portable power
distribution units require devices to
deliver power in a reverse direction
to power up a piece of equipment
or building . Hubbell manufactures
reverse service devices in both the
IEC and Insulgrip Pin and Sleeve
configurations as well as IEC
Mechanical Interlock Inlets .
Dimensions in Inches (mm)
IEC Configurations Chart
Singly Rated Configurations
Voltage
Every non-metallic Hubbell Pin and Sleeve product is
designed and manufactured to meet the International
Standard IEC 60309-1 and IEC 60309-2 . This device
standard calls out a singly rated, non-interchangeable
configuration for every voltage and type of service
throughout the world . Pin and sleeve device housings
are color coded by voltage rating .
The voltage is determined by the location of the female
ground contact relative to the housing keyway . Simply by
manufacturing the device with a ground contact in a certain
“clock” position, the device will be rated for a particular
voltage system . The diagram shows the keying position and
the color coding that is associated with each voltage .
3Ø 250V
2P
Gr ole
ou
11 12 1
10
2
9
3
4
8
7 6 5
380415V
250V
DC 380V 50Hz
440V 60Hz
125V
AC
550V
DC
480V
AC
400V DC
3Ø
480V AC
Color
re
Wi
3 ing
nd
3ØY
120/208V
ire
W
4 ing
d
440-460V
(60Hz)
3
Gr Pol
ou e
n
125/250V
AC
ire
W
5 ng
di
4
Gr Pol
ou e
n
Rated Voltage
100V - 130V
125V/250V
200V - 250V
277V
380V - 480V
500V - 690V
Pin and Sleeve Devices
IEC Pin and Sleeve
277V
AC
250V
AC
380-415V
AC
3Ø
600V AC
3ØY
277/480V
3ØY
347/600V
200/346V AC
240/415V AC
Typical IEC Pin and Sleeve Catalog Number
HBL 4 100 C 12 W
Hubbell Catalog Number
Watertight
4 Wire
Female Ground Sleeve at “12” O’Clock (125/250V)
100 Amp
Explanation
1 (HBL) Designates
Hubbell Catalog
Number
Dimensions in Inches (mm)
2 First Digit
3-3 wire
4-4 wire
5-5 wire
“C” Connector
3 Next Series Of Digits
Preceding a letter
20-20 Amp
30-30 Amp
60-60 Amp
100-100 Amp
4 Letter
5 Last Digit(s)
P-Plug
After the letter . This denotes
R-Receptacle
the position of the ground
C-Connector
sleeve and the assigned
B-Inlet
voltage in the receptacle as
MI-Mechanical
it relates to the hours of the
Interlock
clock . This is done to eliminate
MIF-Mechanical interchangeability between
Interlock Fused
devices with different voltages .
www.hubbell-wiring.com
6 Letter: W
Watertight
E-3
IEC Configurations Chart
HBL4100C12W
Pin and Sleeve Devices
IEC Pin and Sleeve
IP67
Watertight Devices
RoHS
SUITABILITY
Features and Benefits
Self-Closing Gasketed Cover
Detents into position to fully close automatically .
Corrosion-resistant hardware
Liquidtight Conduit Adapters
Machined aluminum adapters are available to
provide a means for attaching flexible liquidtight
metal conduit to rear of Hubbell Pin and Sleeve
plug or connector
Watertight Neoprene Sealing Glands
Provide a reliable seal at the cable entry point .
Prevents infiltration of contaminants
Color Coded Housings
IEC pin and sleeve devices are color coded
by voltage for easy identification
IEC Pin and Sleeve
Insulated Non-Metallic Housing
Super tough, non-conductive and chemical resistant
for heavy duty industrial environments
Powerful Mechanical Cord Grip
Hubbell’s design incorporates
two molded-in teeth to securely
grip the outer cable jacket,
and internal conductors to
prevent slippage and strain on
terminations . Captive barrel nuts
ease assembly and allow higher
tightening torque for maximum
cord retention .
E-4
Watertight Cord Entrance
The tapered bore entrance
creates high compression
forces on sealing gland,
providing a watertight seal
around cord . Individual solid
neoprene glands are supplied
to match a full range of cord
sizes and assure watertight
performance .
Multi-Contact Spring
(60/63 and 100/125 Amp)
Recessed within the female
sleeve, provides and
maintains high unit pressure
on mating pins to minimize
temperature rise . Broaches
oxide film to achieve low
resistance contact for
cooler operation .
www.hubbell-wiring.com
Sequential Contact
Engagement
Ground makes first and
breaks last . Neutral
makes second and breaks
second (to prevent a
momentary over-voltage
on components connected
phase to neutral) . Phase
contacts make last and
break first.
Dimensions in Inches (mm)
IP67
Watertight Devices
RoHS
SUITABILITY
Features and Benefits
Gasketed Sealing Ring
Provides watertight seal when mated with
receptacle or connector
Solid One-Piece Pins
Machined from solid brass
for longer life and reliable
electrical contact
Heavy Duty External Cord Grips
Provide maximum cord retention to
maintain secure terminations
Contact Collar
Raised collar surrounds each phase
pin increasing the tracking resistance
between contacts across the contact
carrier face
Dimensions in Inches (mm)
Lockout/Tagout
Tapered opening on plug
shroud accommodates up
to ³⁄₈ inch (9 .7mm) lock
shackle diameter
Shrouded Pins
Super tough plug shroud
protects pins from deforming
from physical abuse .
Protects the user from the
possibility of touching live
contacts during insertion and
withdrawal of mating parts .
Swivel Pressure Pads
16/20 and 30/32 Amp devices
feature patented swiveling
pressure pad terminal screws
and prevent damage to
conductor strands . 60/63 and
100/125 Amp devices feature
large hex-head stainless
steel screws which provide
higher torque levels for secure
terminations . The large box
terminals are designed for
North American conductors .
www.hubbell-wiring.com
Thermoset Polyester
Contact Carrier
Molded thermoset polyester
provides high resistance to
electrical tracking . Withstands
higher temperatures which
may result from overload or
arcing . Thermoset properties
provide dimensional stability
for this critical assembly .
E-5
IEC Pin and Sleeve
Rugged One-Piece Housing
Thick wall construction protects
internal components, eliminates
joints preventing infiltration
of contaminants . Amperage/
voltage rating and catalog
number molded in housing for
easy identification.
Pin and Sleeve Devices
IEC Pin and Sleeve
Pin and Sleeve Devices
IEC Pin and Sleeve
IP67
20 and 30 Ampere – North American Ratings
16 and 32 Ampere – International Ratings
Rating
Poles
Configuration
and Recep./
Plug/
Amps Wires Conn.
Inlet
SUITABILITY
Watertight Devices
16 2P 3W
100-130V
HBL316R4W
HBL316P4W
HBL316C4W
HBL316B4W† BB2030N
2P 3W
220-240V
HBL316R6W
HBL316P6W
HBL316C6W
HBL316B6W
3P 4W
380-415V
HBL416R6W
HBL416P6W
HBL416C6W
HBL416B6W† BB2030N
4P 5W
220/380V
240/415V
HBL516R6W
HBL516P6W
HBL516C6W
HBL516B6W
BB2030N
20 2P 3W
125V
HBL320R4W
HBL320P4W
HBL320C4W
HBL320B4W
BB2030N
2P 3W
250V
HBL320R6W
HBL320P6W
HBL320C6W
HBL320B6W
BB2030N
2P 3W
480V
HBL320R7W
HBL320P7W
HBL320C7W
HBL320B7W
BB2030N
3P 4W
125/250V
HBL420R12W HBL420P12W HBL420C12W HBL420B12W BB2030N
3P 4W
3Ø 250V
HBL420R9W
HBL420P9W
HBL420C9W
HBL420B9W
BB2030N
3P 4W
3Ø 480V
HBL420R7W
HBL420P7W
HBL420C7W
HBL420B7W
BB2030N
3P 4W
3Ø 600V
HBL420R5W
HBL420P5W
HBL420C5W
HBL420B5W
BB2030N
3ØY
120/208V
3ØY
277/480V
3ØY
347/600V
HBL520R9W
HBL520P9W
HBL520C9W
HBL520B9W
BB2030N
HBL520R7W
HBL520P7W
HBL520C7W
HBL520B7W
BB2030N
HBL520R5W
HBL520P5W
HBL520C5W
HBL520B5W
BB2030N
30 2P 3W
125V
HBL330R4W
HBL330P4W
HBL330C4W
HBL330B4W
BB2030N
2P 3W
250V
HBL330R6W
HBL330P6W
HBL330C6W
HBL330B6W
BB2030N
2P 3W
480V
HBL330R7W
HBL330P7W
HBL330C7W
HBL330B7W
BB2030N
3P 4W
125/250V
HBL430R12W HBL430P12W HBL430C12W HBL430B12W BB2030N
3P 4W
3Ø 250V
HBL430R9W
HBL430P9W
HBL430C9W
HBL430B9W
BB2030N
3P 4W
3Ø 480V
HBL430R7W
HBL430P7W
HBL430C7W
HBL430B7W
BB2030N
3P 4W
3Ø 600V
HBL430R5W
HBL430P5W
HBL430C5W
HBL430B5W
BB2030N
3ØY
120/208V
3ØY
277/480V
3ØY
347/600V
HBL530R9W
HBL530P9W
HBL530C9W
HBL530B9W
BB2030N
HBL530R7W
HBL530P7W
HBL530C7W
HBL530B7W
BB2030N
HBL530R5W
HBL530P5W
HBL530C5W
HBL530B5W
BB2030N
32 2P 3W
100-130V
HBL332R4W† HBL332P4W† HBL332C4W† HBL332B4W† BB2030N
2P 3W
220-240V
HBL332R6W
HBL332P6W
HBL332C6W
HBL332B6W
BB2030N
3P 4W
380-415V
HBL432R6W
HBL432P6W
HBL432C6W
HBL432B6W
BB2030N
380V 50Hz
440V 60Hz
220/380V
240/415V
HBL432R3W
HBL432P3W
HBL432C3W
HBL432B3W† BB2030N
HBL532R6W
HBL532P6W
HBL532C6W
HBL532B6W
4P 5W
4P 5W
4P 5W
4P 5W
3P 4W
4P 5W
Connector
Inlet
Back Boxes
Non-Metallic Metallic
Receptacle
4P 5W
Plug
Replacement Interiors
Accessories
AC Voltage
4P 5W
IEC Pin and Sleeve
RoHS
Watertight Devices
BB2030N
BB2030N
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
Closure Recep./
Caps
Conn.
Plug/
Inlet
PC320
IN320BF IN320BM
PC320
IN320BF IN320BM
PC420
IN420DF IN420DM
PC520
IN520EF† IN520EM
PC320
IN320AF IN320AM
PC320
IN320BF IN320BM
PC320
IN320BF IN320BM
PC420
IN420CF IN420CM
PC420
IN420DF IN420DM
PC420
IN420DF IN420DM
PC420
IN420DF IN420DM
PC520
IN520EF† IN520EM
PC520
IN520EF† IN520EM
PC520
IN520EF† IN520EM
PC3430 IN330AF IN330AM
PC3430 IN330BF IN330BM
PC3430 IN330BF IN330BM
PC3430 IN430CF IN430CM
PC3430 IN430DF IN430DM
PC3430 IN430DF IN430DM
PC3430 IN430DF IN430DM
PC530
IN530EF IN530EM
PC530
IN530EF IN530EM
PC530
IN530EF IN530EM
PC3430 IN330BF IN330BM
PC3430 IN330BF IN330BM
PC3430 IN430DF IN430DM
PC3430 IN430DF IN430DM
PC530
IN530EF IN530EM
Note: See page E-9 and E-10 for back boxes and accessories, E-11 and E-12 for product dimensions, E-13 and E-14 for product specifications and HP ratings.
Closure caps purchased separately, see page E-10. PC320, PC420, PC520, PC3430, PC530 are not UL or CSA.
† Consult factory.
E-6
www.hubbell-wiring.com
Dimensions in Inches (mm)
RoHS
Watertight Devices
IP67
60 and 100 Ampere – North American Ratings
63 and 125 Ampere – International Ratings
Rating
Poles
Configuration
and Recep./
Plug/
Amps Wires Conn.
Inlet
60
Receptacle
Plug
Connector
Inlet
HBL360C4W
HBL360B4W
BB60N
2P 3W
250V
HBL360R6W
HBL360P6W
HBL360C6W
HBL360B6W
BB60N
2P 3W
480V
HBL360R7W
HBL360P7W
HBL360C7W
HBL360B7W
BB60N
3P 4W
125/250V
HBL460R12W HBL460P12W HBL460C12W HBL460B12W BB60N
3P 4W
3Ø 250V
HBL460R9W
HBL460P9W
HBL460C9W
HBL460B9W
BB60N
3P 4W
3Ø 480V
HBL460R7W
HBL460P7W
HBL460C7W
HBL460B7W
BB60N
3P 4W
3Ø 600V
HBL460R5W
HBL460P5W
HBL460C5W
HBL460B5W
BB60N
3ØY
120/208V
3ØY
277/480V
3ØY
347/600V
HBL560R9W
HBL560P9W
HBL560C9W
HBL560B9W
BB60N
HBL560R7W
HBL560P7W
HBL560C7W
HBL560B7W
BB60N
HBL560R5W
HBL560P5W
HBL560C5W
HBL560B5W
BB60N
2P 3W
220-240V
HBL363R6W
HBL363P6W
HBL363C6W
HBL363B6W
BB60N
3P 4W
380-415V
HBL463R6W
HBL463P6W
HBL463C6W
HBL463B6W
BB60N
4P 5W
220/380V
240/415V
HBL563R6W
HBL563P6W
HBL563C6W
HBL563B6W
BB60N
2P 3W
125V
HBL3100R4W HBL3100P4W HBL3100C4W HBL3100B4W BB100N
2P 3W
250V
HBL3100R6W HBL3100P6W HBL3100C6W HBL3100B6W BB100N
2P 3W
480V
HBL3100R7W HBL3100P7W HBL3100C7W HBL3100B7W BB100N
3P 4W
125/250V
HBL4100R12W HBL4100P12W HBL4100C12W HBL4100B12W BB100N
3P 4W
3Ø 250V
HBL4100R9W HBL4100P9W HBL4100C9W HBL4100B9W BB100N
3P 4W
3Ø 480V
HBL4100R7W HBL4100P7W HBL4100C7W HBL4100B7W BB100N
3P 4W
3Ø 600V
HBL4100R5W HBL4100P5W HBL4100C5W HBL4100B5W BB100N
3ØY
120/208V
3ØY
277/480V
3ØY
347/600V
HBL5100R9W HBL5100P9W* HBL5100C9W HBL5100B9W BB100N
2P 3W
220-240V
HBL3125R6W HBL3125P6W HBL3125C6W HBL3125B6W BB100N
3P 4W
380-415V
HBL4125R6W HBL4125P6W HBL4125C6W HBL4125B6W BB100N
4P 5W
220/380V
240/415V
HBL5125R6W HBL5125P6W HBL5125C6W HBL5125B6W BB100N
4P 5W
4P 5W
HBL5100R7W HBL5100P7W HBL5100C7W HBL5100B7W BB100N
HBL5100R5W HBL5100P5W HBL5100C5W HBL5100B5W BB100N
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
Recep./
Conn.
Plug/
Inlet
PC60
IN360AF
IN360AM
PC60
IN360BF
IN360BM†
PC60
IN360BF
IN360BM†
PC60
IN460CF
IN460CM
PC60
IN460DF
IN460DM
PC60
IN460DF
IN460DM
PC60
IN460DF
IN460DM
PC60
IN560EF
IN560EM†
PC60
IN560EF
IN560EM†
PC60
IN560EF
IN560EM†
PC60
IN360BFS
IN360BMS†
PC60
IN460DFS
IN460DMS
PC60
IN560EFS†
IN560EMS
PC100 IN3100AF
IN3100AM
PC100 IN3100BF
IN3100BM†
PC100 IN3100BF
IN3100BM†
PC100 IN4100CF† IN4100CM
PC100 IN4100DF
IN4100DM
PC100 IN4100DF
IN4100DM
PC100 IN4100DF
IN4100DM
PC100 IN5100EF
IN5100EM
PC100 IN5100EF
IN5100EM
PC100 IN5100EF
IN5100EM
PC100 IN3100BFS† IN3100BMS†
PC100 IN4100DFS IN4100DMS
PC100 IN5100EFS IN5100EMS
Note: See page E-9 and E-10 for back boxes and accessories, E-11 and E-12 for product dimensions, E-13 and E-14 for product specifications and HP ratings.
All 63A and all 125A devices have pilot pins or contacts.
Closure caps purchased separately, see page E-10. PC60 and PC100 are not UL or CSA.
* Short housing plug HBL5100P9WSH, see page E-16 for more information. IP22 suitability - length 8.30" (210.8).
† Consult factory.
Dimensions in Inches (mm)
www.hubbell-wiring.com
E-7
IEC Pin and Sleeve
HBL360P4W
4P 5W
Replacement Interiors
Back Boxes
Closure
Non-Metallic Metallic Caps
HBL360R4W
4P 5W
125
AC Voltage
Accessories
125V
4P 5W
100
Watertight Devices
2P 3W
4P 5W
63
SUITABILITY
Pin and Sleeve Devices
IEC Pin and Sleeve
Pin and Sleeve Devices
IEC Pin and Sleeve
RoHS
Corrosion Resistant Devices
IP67
100 Ampere Devices
SUITABILITY
Devices that Withstand the Most Abusive Environments
Hubbell offers a superior grade of 100A IEC Pin and Sleeve designed for use in the most demanding environments . These devices
feature nickel plated solid brass pins for long life and reliable electrical contact in the most corrosive environments . They have a high
visibility yellow supertough nylon housing . The heavy duty external cord clamps provide maximum cord retention to maintain secure
terminations . The screws and fasteners are made from stainless steel .
• Food Processing
• Water Treatment
• Meat Packing
• Agriculture
• Factory
• Washdown
• Construction
• Outdoor Entertainment
• Temporary Power
Standard Service
Rating
Poles
And
Wires
Amps
IEC Pin and Sleeve - Corrosion Resistant
100
Configuration
Recep./
Conn.
Plug
Watertight Devices
AC Voltage
Receptacle
Plug
Accessories
Connector
Back Boxes
Non-Metallic Metallic
Closure
Caps
3P 4W
125/250V
M4100R12
M4100P12
M4100C12
BB100N
BB1001W
PC100
BB1002W
4P 5W
3ØY
120/208V
M5100R9
M5100P9
M5100C9
BB100N
BB1001W
PC100
BB1002W
4P 5W
3ØY
277/480V
M5100R7
M5100P7
M5100C7
BB100N
BB1001W
PC100
BB1002W
"Reverse Service"
Rating
Poles
And
Wires
Amps
100
Configuration
Conn.
Inlet
Watertight Devices
Accessories
Connector
Back Boxes
Non-Metallic Metallic
Closure
Caps
AC Voltage
Inlet
Plug
3P 4W
125/250V
M4100B12R
—
M4100C12R
BB100N
BB1001W
PC100
BB1002W
4P 5W
3ØY
120/208V
M5100B9R
—
M5100C9R
BB100N
BB1001W
PC100
BB1002W
4P 5W
3ØY
277/480V
M5100B7R
—
M5100C7R
BB100N
BB1001W
PC100
BB1002W
Note: See page W-17 for corrosion resistant cord sets.
E-8
www.hubbell-wiring.com
Dimensions in Inches (mm)
RoHS
Back Boxes
Back Boxes
Hubbell manufactures an extensive line of back boxes for use with IEC Pin and Sleeve devices . Each
back box is designed to give the user the maximum amount of wiring room while achieving grounding to
metallic conduit . Hubbell back boxes are available in non-metallic and cast metal versions .
Non-Metallic 15º Angle Back Box
Description
N.P.T. Hub Size*
Back box for 16, 20, 30 and 32A devices .
1"
Catalog Number
BB60N
Pin and Sleeve Devices
IEC Pin and Sleeve
BB2030N
Back box for 60 and 63A devices .
1¼"
BB60N
Back box for 100 and 125A devices .
1½"
BB100N
Note: * Hub is not included; order one of the following Raco® part numbers: 1 in. = 1704, 1¼ in. = 1705, 1½ in. = 1706.
These boxes meets IP67 requirement and Type 4X requirements when installed with a watertight conduit hub.
Metallic 15º Angle Back Box**
Description
N.P.T. Hub Size
Back box for 16, 20, 30 and 32A devices .
¾"
1"
1¼"
1½"
1½"
2"
Back box for 60 and 63A devices .
Back box for 100 and 125A devices .
Catalog Number
BB601W
BB201W
BB301W
BB601W
BB602W
BB1001W
BB1002W
Note: ** These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
FW6010055
Metallic 55º Angle Back Box and Adapter**
Description
N.P.T. Hub Size
Feed-thru box back box and adapter for 16, 20, 30 and 32A devices .
Angle adapter only .
Back box and adapter for 60, 63, 100 and 125A devices .
Angle adapter only .
1"
1½"
Catalog Number
AB203055
AA203055
FW6010055
AA6010055
Note: ** These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
Metallic Feed-Thru Back Box**
FT202W
Description
N.P.T. Hub Size
Feed-thru box for 16, 20, 30 and 32A devices .
¾"
1"
Catalog Number
FT202W
FT302W
Note: ** These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
Metallic Four-Way 15º Angle Back Box**
Description
N.P.T. Hub Size
Four-way box for 60, 63, 100 and 125A devices .
1½"
Catalog Number
FW60100
Note: ** These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
FW60100
Straight Wall Box Adapter
Catalog Number
Adapts 16, 20, 30 and 32A Watertight IEC Pin and Sleeve devices
to 2-gang, device mount, FD boxes .
HBL2030AP
HBL2030AP
Angle Wall Box Adapter
Description
Catalog Number
Adapts 16, 20, 30 and 32A Watertight IEC Pin and Sleeve devices
to standard wall boxes .
AA2030PS
Note: Adapts 20 and 30A Watertight Pin and Sleeve receptacle to single, 2-gang standard wall box and 4 or 411/16⁄ ⁄ inch
square for non-watertight applications.
AA2030PS
Dimensions in Inches (mm)
www.hubbell-wiring.com
E-9
IEC Pin and Sleeve
Description
Pin and Sleeve Devices
IEC Pin and Sleeve
Accessories
Closure Caps
Cap assemblies provide watertight sealing to a disconnected male IEC Pin and Sleeve plug or inlet .
Manufactured of the same tough non-metallic material as the watertight IEC Pin and Sleeve devices
for corrosion and abuse resistance .
PC3430
Description
Catalog Number
Fits all 16 and 20A, 3 wire plugs and inlets .
Fits all 16 and 20A, 4 wire plugs and inlets .
Fits all 16 and 20A, 5 wire plugs and inlets .
Fits all 30 and 32A, 3 and 4 wire plugs and inlets .
Fits all 30 and 32A, 5 wire plugs and inlets .
Fits all 60 and 63A plugs and inlets .
Fits all 100 and 125A plugs and inlets .
PC320
PC420
PC520
PC3430
PC530
PC60
PC100
Cover Assemblies
Replacement cover assemblies for use with watertight connector bodies and receptacles .
Kit contains cover, arm assembly and installation tool .
CA3430
Description
Catalog Number
Fits all 16 and 20A, 3 wire watertight female devices .
Fits all 16 and 20A, 4 wire watertight female devices .
Fits all 16 and 20A, 5 wire watertight female devices .
Fits all 30 and 32A, 3 and 4 wire watertight female devices .
Fits all 30 and 32A, 5 wire watertight female devices .
Fits all 60 and 63A watertight female devices .
Fits all 100 and 125A watertight female devices .
CA320
CA420
CA520
CA3430
CA530
CA60
CA100
Cord Clamp and Locking Ring
Replacement cord clamp and locking ring for use with IEC plugs, connectors and inlets .
CC3430
LR3430
Description
Cord Clamp
Catalog Number
Locking Ring
Catalog Number
Fits all 16 and 20A, 3 wire plugs, connectors and inlets .
Fits all 16 and 20A, 4 wire plugs, connectors and inlets .
Fits all 16 and 20A, 5 wire plugs, connectors and inlets .
Fits all 30 and 32A, 3 and 4 wire plugs, connectors and inlets .
Fits all 30 and 32A, 5 wire plugs, connectors and inlets .
Fits all 60 and 63A plugs, connectors and inlets .
Fits all 100 and 125A plugs, connectors and inlets .
CC320
CC420
CC520†
CC3430
CC530†
CC60
CC100
LR320*
LR420*
LR520*
LR3430*
LR530*
LR60*
LR100*
Note: * Locking Ring only for plugs and inlets.
† Consult factory.
Liquidtight Adapters
Machined aluminum adapters are available to provide a means for attaching flexible liquidtight metal
conduit to rear of a Hubbell Pin and Sleeve plug or connector . To install, remove cord grip and two
gland cap screws . Use screws to attach adapter . Kellems® liquidtight conduit connectors are available
to control arc of bend and to prevent conduit pull-out where vibration, motion or strain is present .
These grips interface directly with Hubbell’s liquidtight adapters and are available in a wide variety
of N .P .T . sizes and configurations . Consult your local code grounding requirements before using
liquidtight adapters .
IEC Pin and Sleeve
SAB34
074093403
E-10
Rating of Hubbell
Pin and Sleeve Device
Liquidtight
Conduit Size
Hubbell
Liquidtight Adapter
Catalog Number
Optional Kellems
Liquidtight Conduit Grip
Catalog Number
16 and 20 Amp
3 and 4 Wire
16 and 20 Amp 5 wire
and 30 and 32 Amp
3 and 4 wire
30 and 32 Amp 5 wire
30 and 32 Amp 5 wire
and 60 and 63 Amp (all)
100 and 125 Amp (all)
½" N .P .T .
¾" N .P .T .
½" N .P .T .
¾" N .P .T .
1" N .P .T .
¾" N .P .T .
1" N .P .T .
1¼" N .P .T .
1¼" N .P .T .
1½" N .P .T .
SAA12
SAA34
SAB12
SAB34
SAB100
SAC34
SAC100
SAC125
SAD125
SAD150
074093402
074093403
074093402
074093403
074093404
074093403
074093404
074093405
074093405
074093406
www.hubbell-wiring.com
Dimensions in Inches (mm)
Pin and Sleeve Devices
IEC Pin and Sleeve
Dimensions
Plug Dimensions
Plug
Type
A
B
Cord Grip Range
HBL320P
HBL420P
HBL520P
HBL330P
HBL430P
HBL530P
HBL360P, HBL460P,
HBL560P
HBL3100P, HBL4100P, M4100P,
HBL5100P, M5100P
6 .61" (167 .8)
7 .00" (177 .8)
7 .65" (194 .3)
8 .05" (204 .5)
8 .05" (204 .5)
8 .54" (216 .9)
10 .15" (257 .8)
2 .87" (73 .0)
3 .19" (81 .0)
3 .50" (89 .0)
3 .74" (95 .0)
3 .74" (95 .0)
4 .02" (102 .0)
4 .49" (114 .0)
.330"- .830" (8 .4-21 .1)
.330"- .830" (8 .4-21 .1)
.330"- .830" (8 .4-21 .1)
.375"-1 .250" (9 .5-31 .8)
.375"-1 .250" (9 .5-31 .8)
.500"-1 .450" (12 .7-36 .8)
.500"-1 .450" (12 .7-36 .8)
12 .63" (320 .8)
4 .92" (125 .0)
1 .065"-1 .940" (27 .1-49 .3)
B
A
Short Housing Plug
B
Short Housing Plug Dimensions
Type
A
B
Cord Grip Range
HBL5100P9WSH
8 .30" (210 .82)
4 .92" (125 .0)
1 .065"-1 .940" (27 .1-49 .3)
Type
A
B
Cord Grip Range
HBL320C
HBL420C
HBL520C
HBL330C
HBL430C
HBL530C
HBL360C, HBL460C,
HBL560C
HBL3100C, HBL4100C, M4100C,
HBL5100C, M5100C
7 .49" (190 .3)
7 .90" (200 .6)
8 .54" (216 .9)
9 .05" (229 .9)
9 .05" (229 .9)
9 .68" (245 .8)
11 .15" (283 .2)
3 .33" (84 .6)
3 .66" (93 .0)
3 .94" (100 .0)
4 .27" (108 .5)
4 .27" (108 .5)
4 .70" (119 .5)
5 .10" (129 .5)
.330"- .830" (8 .4-21 .1)
.330"- .830" (8 .4-21 .1)
.330"- .830" (8 .4-21 .1)
.375"-1 .250" (9 .5-31 .8)
.375"-1 .250" (9 .5-31 .8)
.500"-1 .450" (12 .7-36 .8)
.500"-1 .450" (12 .7-36 .8)
13 .57" (344 .7)
5 .71" (145)
1 .065"-1 .940" (27 .1-49 .3)
A
Connector Body Dimensions
Connector Body
B
A
Inlet
B
D
Inlet Dimensions
Type
A
HBL320B
2 .54" (64 .5)
HBL420B
2 .54" (64 .5)
HBL520B
2 .54" (64 .5)
HBL330B
2 .99" (76 .0)
HBL430B
2 .99" (76 .0)
HBL530B
2 .99" (76 .0)
HBL360B,
4 .04" (102 .6)
HBL460B,
HBL560B
HBL3100B,
4 .53" (115)
HBL4100B, M4100B,
HBL5100B, M5100B
B
C
D
E
F
1 .85" (47 .0)
2 .11" (53 .6)
2 .41" (61 .2)
2 .49" (63 .2)
2 .49" (63 .2)
2 .75" (69 .9)
2 .97" (75 .5)
1 .14" (29 .0)
1 .14" (29 .0)
1 .14" (29 .0)
1 .04" (26 .5)
1 .04" (26 .5)
1 .04" (26 .5)
1 .18" (30 .0)
2 .72" (69 .0)
2 .72" (69 .0)
2 .72" (69 .0)
2 .72" (69 .0)
2 .72" (69 .0)
2 .80" (71 .0)
3 .46" (88 .0)
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
4 .50" (114 .3)
3 .13" (79 .5)
3 .13" (79 .5)
3 .13" (79 .5)
3 .13" (79 .5)
3 .13" (79 .5)
3 .13" (79 .5)
3 .88" (98 .5)
3 .44" (87 .5)
1 .95" (49 .5)
3 .94" (100 .0) 5 .50" (139 .7) 4 .88" (124 .0)
A
C
E
F
⁷⁄₃₂" (5.5) Dia. (4 Holes)
Receptacle
Receptacle Dimensions
Type
A
B
C
D
E
F
2 .78" (70 .6)
2 .78" (70 .6)
2 .78" (70 .6)
3 .09" (78 .5)
3 .09" (78 .5)
3 .09" (78 .5)
4 .07" (103 .4)
1 .02" (26 .0)
1 .02" (26 .0)
1 .02" (26 .0)
1 .16" (29 .5)
1 .16" (29 .5)
1 .16" (29 .5)
1 .69" (43 .0)
2 .72" (69 .0)
2 .72" (69 .0)
2 .72" (69 .0)
2 .72" (69 .0)
2 .72" (69 .0)
2 .83" (71 .9)
3 .46" (88 .0)
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
3 .75" (95 .3)
4 .50" (114 .3)
3 .13" (79 .5)
3 .13" (79 .5)
3 .13" (79 .5)
3 .13" (79 .5)
3 .13" (79 .5)
3 .13" (79 .5)
3 .88" (98 .6)
4 .23" (107 .4) 2 .46" (62 .5)
3 .95" (100 .3) 5 .50" (139 .7) 4 .88" (123 .9)
A
D
B
C
E
F
Note: 20, 30, 60 and 100A devices are dimensionally equivalent to 16, 32, 63 and 125A devices, respectively.
⁷⁄₃₂" (5.5) Dia. (4 Holes)
Dimensions in Inches (mm)
www.hubbell-wiring.com
E-11
IEC Pin and Sleeve
HBL320R
3 .33" (84 .5)
HBL420R
3 .66" (93 .0)
HBL520R
3 .94" (100 .0)
HBL330R
4 .27" (108 .5)
HBL430R
4 .27" (108 .5)
HBL530R
4 .70" (119 .4)
HBL360R,
5 .10" (129 .5)
HBL460R,
HBL560R
HBL3100R,
5 .71" (145)
HBL4100R, M4100R,
HBL5100R, M5100R
Pin and Sleeve Devices
IEC Pin and Sleeve
Dimensions
Non-Metallic 15º Angle Back Box
E
Description
F
C
A
15°
B
D
Back box for 16, 20,
30 & 32A devices .
Back box for 60
& 63A devices .
Back box for 100
& 125A devices .
N.P.T.
Hub
Size+
1"
1¼"
1½"
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
5 .67"
(144 .0)
7 .76"
(197 .0)
8 .21"
(209 .0)
4 .44"
(112 .8)
5 .16"
(131 .0)
6 .23"
(158 .0)
4 .05"
(102 .9)
5 .87"
(149 .0)
6 .31"
(160 .3)
3 .91"
(99 .3)
4 .72 "
(120 .0)
5 .71"
(145 .0)
2 .35"
(59 .7)
2 .99"
(76 .0)
3 .99 "
(101 .0)
4 .92" 30 .00"
(125 .0)
6 .94" 70 .00"
(176 .0)
7 .41" 120 .00"
(188 .0)
Catalog
Number
BB2030N
BB60N
BB100N
Note: * Hub is not included; order one of the following Raco® part numbers: 1 inch = 1704, 1¼ inch = 1705,
1½ inch = 1706.
These boxes meet IP67 requirement and Type 4X requirements when installed with a watertight conduit hub.
Non-Metallic Angle Box
Metallic 15º Angle Back Box
E
Description
C
A
F
15°
B
D
Metallic 15º Angle Box
E
B
Back box for 16, 20,
30 & 32A devices .
Back box for 16, 20,
30 & 32A devices .
Back box for 60
& 63A devices .
Back box for 60
& 63A devices .
Back box for 100
&125A devices .
Back box for 100
& 125A devices .
N.P.T.
Hub
Size
¾"
1"
1¼"
1½"
1½"
2"
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
5 .12"
(130 .2)
5 .12"
(130 .2)
7 .25"
(184 .2)
7 .25"
(184 .2)
8 .12"
(206 .4)
8 .12"
(206 .4)
4 .00"
(101 .6)
4 .00"
(101 .6)
5 .25"
(133 .4)
5 .25"
(133 .4)
6 .75"
(171 .5)
6 .75"
(171 .5)
4 .19"
(106 .4)
4 .19"
(106 .4)
6 .00"
(152 .4)
6 .00"
(152 .4)
6 .88"
(174 .6)
6 .88"
(174 .6)
3 .75"
(95 .3)
3 .75"
(95 .3)
4 .50"
(114 .3)
4 .50"
(114 .3)
5 .50"
(139 .7)
5 .50"
(139 .7)
3 .00"
(76 .2)
3 .00"
(76 .2)
3 .75"
(95 .3)
3 .75"
(95 .3)
4 .75"
(120 .7)
4 .75"
(120 .7)
4 .00"
(101 .6)
4 .00"
(101 .6)
6 .19"
(157 .2)
6 .19"
(157 .2)
6 .94"
(176 .2)
6 .94"
(176 .2)
30 .00"
BB201W
30 .00"
BB301W
80 .00"
BB601W
80 .00"
BB602W
130 .00"
BB1001W
130 .00"
BB1002W
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
Metallic 55º Angle Back Box and Adapter
C
A
Description
55°
Feed-thru box and
1"
angle adapter for 16,
20, 30 & 32A devices .
Angle adapter for 16,
–
20, 30 & 32A devices .
Back box and angle
1½"
adapter for 60, 63,
100 & 125A devices .
Angle adapter for 60,
–
63, 100 & 125A devices .
41
D
Metallic 55º Angle Box
E
48 CU. IN.
C
A
F
IEC Pin and Sleeve
D
Metallic Feed-Thru Box
D
E
B
Feed-thru box for 16,
20, 30 & 32A devices .
Feed-thru box for 16,
20, 30 & 32A devices .
C
B
Inch
(mm)
C
Inch
(mm)
6 .80" 6 .60" 5 .63" 4 .50" 3 .74"
(172 .4) (167 .0) (142 .9) (114 .3) (95 .0)
–
42 .27"
AB203055
4 .89"
(124 .3)
8 .50"
(215 .9)
2 .50"
(63 .5)
6 .00"
(152 .4)
–
25 .00"
AA203055
–
100 .00"
FW6010055
6 .75" 4 .48" 6 .00" 6 .75" 6 .00"
(171 .4) (113 .7) (152 .4) (171 .4) (152 .4)
–
79 .00"
AA6010055
Cubic
Inch
Capacity
Catalog
Number
3 .33"
(84 .6)
8 .00"
(202 .9)
4 .29"
(109 .0)
7 .75"
(196 .8)
3 .75"
(95 .2)
6 .90"
(174 .8)
N.P.T.
Hub
Size
¾"
1"
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
8 .25"
(209 .6)
8 .25"
(209 .6)
3 .06"
(77 .8)
3 .06"
(77 .8)
7 .14"
(181 .4)
7 .14"
(181 .4)
4 .50"
(114 .3)
4 .50"
(114 .3)
3 .75"
(95 .3)
3 .75"
(95 .3)
3 .13" 48 .00"
(79 .5)
3 .13" 48 .00"
(79 .5)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
–
210 .00"
FW60100
FT202W
FT302W
Metallic Four-Way 15º Angle Back Box
Description
A
A
Inch
(mm)
Metallic Feed-Thru Back Box
Description
B
N.P.T.
Hub
Size
N.P.T.
Hub
Size
Four-way box for 60,
1½"
63, 100 & 125A devices .
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
8 .75" 9 .75" 7 .75" 6 .75" 6 .00"
(222 .3) (247 .7) (196 .9) (171 .5) (152 .4)
Note: These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
These boxes withstand a 500-hour salt spray test as well as UL rain tight and external icing test.
Metallic Four-Way Angle Box
E-12
www.hubbell-wiring.com
Dimensions in Inches (mm)
Listings and Specifications
IEC Pin and Sleeve Inlet, Connector Body, Plug and Receptacle
Watertight Materials
Part
Inlet
Housing
Locking Ring
Mounting Flange
Mounting Screws
Contact Carrier
Retainer
Ground, Phase Pins
Terminal Screws
Assembly Screws (2)
Gaskets
Connector Body
Housings
Cord Clamps
Glands
Cover Arms
Arm Springs
Covers
Cover Screw
Rotating Sealing Disc
Gaskets
Contact Carrier
Retainer
Phase, Ground Sleeves
Sleeve Spring
Terminal Screws
Assembly Screws
Plug
Housing
Locking Ring
Sealing Gasket
Cord Clamp
Gland Cap
Gland
Cord Clamp Screws
Clamp Nut
Gland Clamp Screws
Contact Carrier
Retainer
Ground, Phase Pins
Terminal Screws
Assembly Screws
Receptacle
Housings
Mounting Flange
Arm Spring
Cover Arm
Cover
Cover Screw
Rotating Sealing Disc
Gaskets
Mounting Screws
Terminal Screws
Phase, Ground Sleeves
Sleeve Spring
Material
Zytel® 101 Nylon
Rynite® SST35
Zytel® 101 Nylon
Stainless Steel (300 Series)
High-Impact Thermoset
High-Impact Thermoset
Brass (M-Series - Nickel-plated brass)
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Solid Neoprene
Zytel® ST801 Nylon
Rynite® SST35
Solid Neoprene
Rynite® SST35
Stainless Steel (17-7 type)
Rynite® SST35
Nickel-plated brass
Polycarbonate
Solid Neoprene
High-Impact Thermoset
High-Impact Thermoset
Brass
20A and 30A Stainless Steel (300 Series); others are Beryllium
Copper multi-contact inserts with silver plating
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Listed to standard UL1682/
CSA C22 .2 No . 182 .1-02,
Plugs, Receptacles and cable
connectors of the Pin and
Sleeve Type .
UL Classified to IEC Standards
60309-1 (Plugs, Socket
Outlets, and Couplers for
Industrial Purposes) for
Series I (European) rated
voltages and services .
When used with cord, these
devices require no further
investigation by UL for
equipment Classification to
IEC 435 or IEC 380 .
Zytel® ST801 Nylon
Rynite® SST35
Solid Neoprene
Rynite® SST35
Rynite® SST35
Solid Neoprene
Stainless Steel (300 Series)
Nickel-Plated Brass
Stainless Steel (300 Series)
High-Impact Thermoset
High-Impact Thermoset
Brass (M-Series - Nickel-plated brass)
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Zytel® 101 Nylon
Zytel® 101 Nylon
Stainless Steel (17-7 type)
Rynite® SST35
Rynite® SST35
Nickel-plated brass
Polycarbonate
Solid Neoprene
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Brass
20A and 30A Stainless Steel (300 Series); others are Beryllium
Copper multi-contact inserts with silver plating
IEC Pin and Sleeve
Specifications
Typical Specification
Manufacturer’s Identification
Description
Type
Rating
Configuration
Certification
Hubbell HBL520P9W .
Plug, Power Supply .
3 Pole + Neutral + Earth .
20A, 120/208V AC, 3 Phase WYE .
UL 1686 C2, IEC 60309-2, Clock Position 9, Watertight .
UL Listed, File E146032 Receptacles and Inlets,
E146033 Plugs and Connectors,
UL Standard UL1682 and UL 1686C2, CSA Certified File LR280C for
Plugs, Connectors Inlets and LR285C for Receptacle CSA Standard
C22 .2 No . 182 .1, UL Classified to IEC 60309-1 IEC 60309-2 .
® Zytel and Rynite are registered trademarks of E.I. DuPont.
Dimensions in Inches (mm)
Pin and Sleeve Devices
IEC Pin and Sleeve
www.hubbell-wiring.com
E-13
Pin and Sleeve Devices
IEC Pin and Sleeve
Specifications and Horsepower Ratings
Performance
Electrical
Dielectric Withstand Voltage
Max . Working Voltage
Current Interrupting
Temperature Rise
Endurance
3000V AC .
600V RMS (i .e ., minimum creepage distance 10 millimeters, minimum clearance 8 millimeters,
per IEC 60309-1 for devices rated over 500V) .
Certified for current interrupting at full rated current .
Max . 30°C temperature rise at full rated current after 50 cycles of overload at 150% of rated current
at a power factor of 75% .
5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and
1,000 cycles without load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles
without load for 100A and 125A .
Mechanical
Impact Resistance
Cord Grip Cable Retention
Cord Accommodation
Terminal Identification
Product Identification
Per CSA C22 .2 No . 182 .1 / UL1682 .
Per CSA C22 .2 No . 182 .1 / UL1682 .
Round portable service cords of diameters commensurate with the device rating as defined in
UL Standard 62, CSA C22 .2 No . 49 and the harmonized <HAR> European Standards .
Terminals identified in accordance with North American and IEC conventions .
Identification and ratings are a permanent part of the device housing .
Environmental
Moisture Resistance
Ingress Protection
Flammability
Operating Temperatures
Watertight per IEC 60309-1 .
IP67 Suitability .
HB or better per UL 94 or CSA C22 .2 No . 0 .17 .
Maximum Continuous 75°C; Minimum - 40°C without impact .
Materials
Housings
All Other Materials
Nylon .
Resistant to corrosion and chemical attack .
Note: Specification sheets for all other Pin and Sleeve catalog numbers are available upon request.
Horsepower Ratings for IEC Pin and Sleeve
IEC Pin and Sleeve
Catalog Number
AC Voltage Rating
Horsepower
HBL420R9W
HBL420P9W
HBL420C9W
HBL420B9W
3Ø 250
2
HBL420R7W
HBL420P7W
HBL420C7W
HBL420B7W
3Ø 480
5
HBL420R5W
HBL420P5W
HBL420C5W
HBL420B5W
3Ø 600
7 .5
HBL520R9W
HBL520P9W
HBL520C9W
HBL520B9W
3ØY 120/208
.5
HBL520R7W
HBL520P7W
HBL520C7W
HBL520B7W
3ØY 277/480
5
HBL520R5W
HBL520P5W
HBL520C5W
HBL520B5W
3ØY 347/600
7 .5
HBL430R9W
HBL430P9W
HBL430C9W
HBL430B9W
3Ø 250
3
HBL430R7W
HBL430P7W
HBL430C7W
HBL430B7W
3Ø 480
7 .5
HBL430R5W
HBL430P5W
HBL430C5W
HBL430B5W
3Ø 600
10
HBL530R9W
HBL530P9W
HBL530C9W
HBL530B9W
3ØY 120/208
2
HBL530R7W
HBL530P7W
HBL530C7W
HBL530B7W
3ØY 277/480
7 .5
HBL530R5W
HBL530P5W
HBL530C5W
HBL530B5W
3ØY 347/600
10
HBL460R9W
HBL460P9W
HBL460C9W
HBL460B9W
3Ø 250
5
HBL460R7W
HBL460P7W
HBL460C7W
HBL460B7W
3Ø 480
10
HBL460R5W
HBL460P5W
HBL460C5W
HBL460B5W
3Ø 600
15
HBL560R9W
HBL560P9W
HBL560C9W
HBL560B9W
3ØY 120/208
3
HBL560R7W
HBL560P7W
HBL560C7W
HBL560B7W
3ØY 277/480
10
HBL560R5W
HBL560P5W
HBL560C5W
HBL560B5W
3ØY 347/600
15
HBL4100R9W
HBL4100P9W
HBL4100C9W
HBL4100B9W
3Ø 250
10
HBL4100R7W
HBL4100P7W
HBL4100C7W
HBL4100B7W
3Ø 480
30
HBL4100R5W
HBL4100P5W
HBL4100C5W
HBL4100B5W
3Ø 600
30
HBL5100R9W
HBL5100P9W
HBL5100C9W
HBL5100B9W
3ØY 120/208
10
HBL5100R7W
HBL5100P7W
HBL5100C7W
HBL5100B7W
3ØY 277/480
30
HBL5100R5W
HBL5100P5W
HBL5100C5W
HBL5100B5W
3ØY 347/600
30
E-14
www.hubbell-wiring.com
Dimensions in Inches (mm)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement