Switches Section C Index

Switches Section C Index
Switches
Section C
Switches
Index
Rating
Features and Benefits
15A, 20A & 30A, 120-277V AC
15A & 20A, 120-277V AC
15A & 20A, 120-277V AC
15A, 20A & 30A, 120-277V AC
15A & 20A, 347V AC
15A & 20A, 120-277V AC
15A & 20A, 120-277V AC
15A & 20A, 120-277V AC
15A, 20A & 30A, 120-277V AC
30A, 40A & 60A, 600V AC
30A, 60A & 100A, 600V AC
30A & 60A, 600V AC
Type
Page Number
Toggle Switch
C-3
Industrial/Institutional Toggle and Lock Type
C-4
Momentary Contact, Three Position, Two Circuit, Center Off
C-4
Lighted Toggle
C-5
Pilot Light Toggle
C-5
Industrial/Institutional Toggle and Lock Type
C-5
Construction and Commercial Toggle
C-6
Style Line® Rocker, Lighted and Pilot Light
C-7
®
Push Button PresSwitch Switches
C-8
Maintained Contact Three Position, Two Circuit, Center Off
C-9
Incandescent Dimmers and Fan Speed Controls
C-10–11
Panel Mount Bat Handle Switches
C-12–13
Push Button Stations
C-14–16
Manual Motor Controllers and Enclosures
C-17–19
UL Type 4X Unfused Disconnect Switch
C-20
UL Type 4X Fused Disconnect Switch
C-21–22
Accessories
C-23–25
Switch Technical Information
C-26
Manual Motor Controllers Technical Information
C-27
UL, CSA & Fed. Spec. Listing Data
C-28
Dimmer Ganging and Derating Chart
C-29
Toggle Switch Wiring Diagrams
C-30–31
Disconnect Switch Technical Information
C-32
Index
Dimensions in Inches (mm)
www.hubbell-wiring.com
Switches
AC Switches
Switches
AC Toggle Switches
Industrial/Institutional – Heavy Duty
Features and Benefits
Thread cleaning
captive mounting screw.
Steel, nickel
plated bridge is
corrosion resistant.
Strip gauge for
accurate wiring.
Large silver cadmium
oxide contacts reduce
contact erosion providing
long life.
Prominent amperage marking
allows easy identification of
rating.
Abuse resistant
nylon toggle.
Back wire entrance
points for terminations
accept two wires for
feed thru capability,
avoiding pigtailing.
Color coded base identifies
amperage when terminating
connections, 15A-Blue, 20A-Red,
30A-Green.
One piece rivetless
copper alloy spring
contact arm & terminal
plate assures proper
contact alignment
providing long life.
Large brass binding
head screws with
deep slots secure
wire connections.
One piece integral
grounding terminal
with #8 brass screw
provides a low resistance
ground path.
Stainless steel automatic
grounding clip assures
grounding continuity between
mounting strap and metal
wall box.
Thermoplastic elastomer rocker assures
precise alignment of carbon steel coil
compression spring. Permanently lubricated
assembly provides long life and trouble free
operation.
Heavy duty nylon toggle resists abuse
and chemical attack making it suitable
for use in the toughest environments.
One piece integral grounding terminal
with #8 brass screw allows compliance to
NEC® . Stainless steel automatic grounding
clip assures grounding continuity between
mounting strap and metal wall box. Steel
nickel plated mounting strap provides a
corrosion resistant finish.
www.hubbell-wiring.com
C-3
Features and Benefits
Dimensions in Inches (mm)
One piece rivetless copper alloy
spring contact arm and terminal plate
assures proper contact alignment
reducing heat rise. Large silver
cadmium oxide contacts reduce
contact erosion and prevent welding,
providing long life.
Switches
AC Switches
15, 20 and 30 Ampere, 120-277 Volts AC
Industrial – Institutional, Heavy Duty Specification Grade
Toggle and Lock Type AC Switches with Ground Screw
F
#6-32
TAP
3.28"
(83.3) 2.38"
(60.5)
2.28"
(57.9)
1.05"
(26.7)
1.0"
(25.4)
1.25"
(31.8)
HBL1221
#6-32
TAP
3.28" 2.38"
(83.3) (60.5)
2.28"
(57.9)
1.05"
(26.7)
1.0"
(25.4)
1.25"
(31.8)
HBL1221L and Key
#6-32
TAP
3.28"
(83.3) 2.38"
(60.5)
2.28"
(57.9)
1.05"
(26.7)
1.0"
(25.4)
1.25"
(31.8)
HBL3031
Operates current
style AC
locking switches .
e.g.: HBL1221L
ACTUATE
Operates old style
AC locking switches.
e.g.: 1221L
(One key furnished
with each lock switch.)
IN
SE
Toggle and Lock
RT
HBL1209
#6-32
TAP
3.28"
(83.3) 2.38"
(60.5)
2.28"
(57.9)
1.05"
(26.7)
1.0"
(25.4)
1.25"
(31.8)
HBL1557
C-4
Specification Grade AC Switches, Back and Side Wired
15A, 120-277V AC
Description
Brown nylon toggle.
Ivory nylon toggle.
Gray nylon toggle.
White nylon toggle.
Red nylon toggle.
Lock type.
Key for lock switches.
Catalog Numbers
Single Pole Double Pole
HBL1201
HBL1202
HBL1201I
HBL1202I
HBL1201GY
–
HBL1201W
–
HBL1201R
–
HBL1201L** HBL1202L**
HBL1209*
Three Way
HBL1203
HBL1203I
HBL1203GY
–
–
HBL1203L**
Four Way
HBL1204
HBL1204I
HBL1204GY
–
–
HBL1204L**
Catalog Numbers
Single Pole Double Pole
HBL1221
HBL1222
HBL1221I
HBL1222I
HBL1221GY HBL1222GY
HBL1221W HBL1222W
HBL1221R HBL1222R
HBL1221BK HBL1222BK
HBL1221L** HBL1222L**
HBL1209*
Three Way
HBL1223
HBL1223I
HBL1223GY
HBL1223W
HBL1223R
HBL1223BK
HBL1223L**
Four Way
HBL1224
HBL1224I
HBL1224GY
HBL1224W
HBL1224R
HBL1224BK
HBL1224L**
20A, 120-277V AC
Description
Brown nylon toggle.
Ivory nylon toggle.
Gray nylon toggle.
White nylon toggle.
Red nylon toggle.
Black nylon toggle.
Lock type.
Key for lock switches.
30A, 120-277V AC
Description
Brown nylon toggle.
Ivory nylon toggle.
Catalog Numbers
Single Pole
Double Pole
HBL3031
HBL3032
HBL3031I
HBL3032I
Three Way
HBL3033
HBL3033I
Momentary Contact, Specification Grade, Back and Side Wired
Three Position, Two Circuit, Center Off. UL & CSA Only
RT
SE
IN
S
Fed.Spec.
Catalog Numbers
Description
15A, 120-277V AC
20A, 120-277V AC
Brown nylon toggle.
HBL1556
HBL1557
Ivory nylon toggle.
HBL1556I
HBL1557I
Gray nylon toggle.
HBL1556GY
HBL1557GY
Red nylon toggle.
HBL1556R
–
White nylon toggle.
–
HBL1557W
Lock type.
HBL1556L
HBL1557L
Key for lock switches.
HBL1209*
Notes: Keys are supplied with each lock switch. For extra keys order HBL1209.
For technical data see page C-26.
See Section K for wall plates. For accessories see pages C-23–C-25.
See pages C-30 and C-31 for wiring diagrams.
* Not UL Listed, CSA Certified
** Not Fed Spec
HP Conversion Chart
15A
20A
30A
120V
.5 HP
1 HP
2HP
208V 240V
1.5HP 2HP
2HP
2HP
2HP
2HP
www.hubbell-wiring.com
277VAC
2HP
2HP
2HP
Dimensions in Inches (mm)
Switches
AC Switches
15, 20 and 30 Ampere, 120-277 Volts AC
Industrial – Institutional, Heavy Duty Specification Grade
Toggle Type Lighted and Pilot Light AC Switches with Ground Screw
F
S
Fed.Spec.
#6-32
TAP
Specification Grade, Lighted and Pilot Light
Toggle Switches, Back and Side Wired
Lighted Toggle (light on with load off)
3.28"
(83.3) 2.38"
(60.5)
Catalog Numbers
Rating
Description
Single Pole Double Pole
15A 120-277V AC Ivory nylon toggle.
HBL1201IL
–
20A 120-277V AC Ivory nylon toggle.
HBL1221IL
–
20A 120-277V AC Clear polycarbonate HBL1221ILC
–
toggle.
2.28"
(57.9)
1.05"
(26.7)
1.0"
(25.4)
Three Way
HBL1203IL
HBL1223IL
HBL1223ILC
1.25"
(31.8)
HBL1221ILC
Pilot Light (light on with load on)
Rating
Description
15A 120-277V AC Red polycarbonate
toggle.
20A 120-277V AC Red polycarbonate
toggle.
20A 120-277V AC Clear polycarbonate
toggle.
20A 120-277V AC Green polycarbonate
toggle.
30A 120-277V AC Red polycarbonate
toggle.
15A, 347V AC
HBL1221PL
HBL1222PL HBL1223PL
HBL1221PLC
–
HBL1223PLC
HBL1221PLG
–
–
3.28"
(83.3) 2.38"
(60.5)
2.28"
(57.9)
1.05"
(26.7)
1.0"
(25.4)
1.25"
(31.8)
HBL1221PL
HBL3031PL
HBL3032PL
–
1.30"
(33.0)
only
Catalog Numbers
Description
Single Pole
Double Pole Three Way
Four Way
Brown nylon toggle. HBL18201CN
–
HBL18203CN
–
Ivory nylon toggle.
HBL18201ICN
–
HBL18203ICN HBL18204ICN
Lock type.
HBL18201LCN
–
HBL18203LCN
–
Key for lock switches. HBL1209
20A, 347V AC
#6-32
TAP
4.06"
(103.1) 3.53"
(90.0) 2.41"
(61.2)
2.27"
(57.7)
1.11"
(28.2)
only
Catalog Numbers
Single Pole
Double Pole Three Way
Four Way
HBL18221CN
–
HBL18223CN
–
HBL18221ICN
–
HBL18223ICN
–
HBL18221CN
Notes: Keys are supplied with each lock switch. For extra keys order HBL1209.
For technical data see page C-26.
See Section K for wallplates. For accessories see pages C-23 to C-25.
See pages C-30 and C-31 for wiring diagrams.
Operates current
style AC
locking switches
RT
SE
IN
ACTUATE
Operates old style
AC locking switches
(One key furnished
with each lock switch.)
IN
SE
RT
HBL1209
HP Conversion Chart
15A
20A
30A
120V
.5 HP
1 HP
2HP
208V 240V
1.5HP 2HP
2HP
2HP
2HP
2HP
Dimensions in Inches (mm)
277VAC
2HP
2HP
2HP
www.hubbell-wiring.com
C-5
Ligthed, Pilot Light and 347V AC
Description
Brown nylon toggle.
Ivory nylon toggle.
#6-32
TAP
Catalog Numbers
Single Pole Double Pole Three Way
HBL1201PL
–
HBL1203PL
Switches
AC Switches
15 and 20 Ampere, 120-277 Volts AC
Construction and Commercial Series Specification Grade
AC Toggle Switches with Ground Screw
1.25"
(31.8)
#6-32 TAP
F
S
Fed.Spec.
3.28" 2.38"
(83.3) (60.5)
2.28"
(57.9)
1.13"
(28.7)
1.31"
(33.2)
CS1201I
#6-32 TAP
1.25"
(31.8)
3.28" 2.38"
(83.3) (60.5)
Description
Brown toggle.
Ivory toggle.
Gray toggle.
White toggle.
Office white toggle.
Catalog Numbers
Single Pole Double Pole
CS1201
–
CS1201I
–
CS1201GY
–
CS1201W
–
CS1201OW
–
Three Way Four Way
CS1203
–
CS1203I
–
CS1203GY
–
CS1203W
–
CS1203OW
–
Catalog Numbers
Single Pole Double Pole
CS1221
CS1222
CS1221I
CS1222I
CS1221GY CS1222GY
CS1221W
CS1222W
CS1221R
CS1222R
CS1221BK CS1222BK
CS1221OW CS1222OW
Three Way
CS1223
CS1223I
CS1223GY
CS1223W
CS1223R
CS1223BK
CS1223OW
20A, 120-277V AC
2.28"
(57.9)
1.13"
(28.7)
1.31"
(33.2)
CS1221
#6-32 TAP
Construction Series Heavy Duty Specification Grade
AC Toggle Switches, Back and Side Wired
15A, 120-277V AC
1.25"
(31.8)
Description
Brown toggle.
Ivory toggle.
Gray toggle.
White toggle.
Red toggle.
Black toggle.
Office white toggle.
Four Way
CS1224
CS1224I
CS1224GY
CS1224W
CS1224R
CS1224BK
CS1224OW
Commercial Series Heavy Duty Specification Grade
AC Toggle Switches, Side Wired Only.
15A, 120-277V AC
Construction and Commercial Toggle
3.28" 2.38"
(83.3) (60.5)
2.28"
(57.9)
1.13"
(28.7)
1.31"
(33.2)
Description
Brown toggle.
Catalog Numbers
Single Pole Double Pole Three Way
CS115
–
CS315
Ivory toggle.
Gray toggle.
White toggle.
Office white toggle.
CS115I
CS115GY
CS115W
CS115OW
–
–
–
–
CS315I
CS315GY
CS315W
CS315OW
Four Way
–
–
–
–
–
CS115I
#6-32 TAP
1.25"
(31.8)
20A, 120-277V AC
1.31"
(33.2)
Catalog Numbers
Description
Single Pole Double Pole Three Way Four Way
Brown toggle.
CS120
–
CS320
–
Ivory toggle.
CS120I
–
CS320I
–
Gray toggle.
CS120GY
–
CS320GY
–
White toggle.
CS120W
–
CS320W
–
Office white toggle.
CS120OW
–
CS320OW
–
Notes: See Section K for wall plates. See page C-30 for wiring diagrams.
For accessories see pages C-23–C-25.
3.28" 2.38"
(83.3) (60.5)
2.28"
(57.9)
1.13"
(28.7)
CS120
HP Conversion Chart
15A
20A
30A
C-6
120V
.5 HP
1 HP
2HP
208V 240V
1.5HP 2HP
2HP
2HP
2HP
2HP
www.hubbell-wiring.com
277VAC
2HP
2HP
2HP
Dimensions in Inches (mm)
Switches
AC Switches
15 and 20 Ampere, 120-277 Volt AC
Style Line® Specification Grade Rocker Switches
Style Line Specification Grade
AC Rocker Switches, Back and Side Wired
15A, 120-277V AC
Description
Brown rocker.
Ivory rocker.
Gray rocker.
White rocker.
Black rocker.
Office white rocker.
Catalog Numbers
Single Pole
Double Pole
HBL2101
–
HBL2101I
–
HBL2101GY
–
HBL2101WA
–
HBL2101BK
–
HBL2101OW
–
Three Way
HBL2103
HBL2103I
HBL2103GY
HBL2103WA
HBL2103BK
HBL2103OW
Four Way
–
–
–
–
–
–
Catalog Numbers
Single Pole
Double Pole
HBL2121
HBL2122
HBL2121I
HBL2122I
HBL2121GY HBL2122GY
HBL2121WA HBL2122WA
HBL2121BK HBL2122BK
HBL2121OW HBL2122OW
Three Way
HBL2123
HBL2123I
HBL2123GY
HBL2123WA
HBL2123BK
HBL2123OW
Four Way
HBL2124
HBL2124I
HBL2124GY
HBL2124WA
HBL2124BK
HBL2124OW
Style Line Specification Grade Lighted and
Pilot Light AC Rocker Switches, Back and Side Wired
20A, 120V AC Lighted Rocker (light on with load off)
Description
Ivory rocker.
White rocker.
Self Grounding
Clip
3.81"
(96.7) 3.28"
(83.3)
20A, 120-277V AC
Description
Brown rocker.
Ivory rocker.
Gray rocker.
White rocker.
Black rocker.
Office white rocker.
#6-32 TAP
Catalog Numbers
Single Pole
Double Pole
HBL2121IL
–
HBL2121ILWA
–
Three Way
Four Way
HBL2123IL
–
HBL2123ILWA
–
20A, 120V AC Pilot Light Rocker (light on with load on)
1.12" (28.4)
1.48"
(37.6)
HBL2121
#6-32 TAP
Self Grounding
Clip
3.81"
(96.7) 3.28"
(83.3)
2.78"
(70.6)
1.12" (28.4)
1.48"
(37.6)
HBL2121IL
Four Way
–
Style Line® Rocker Switches
Catalog Numbers
Description
Single Pole
Double Pole
Three Way
Ivory rocker.
HBL2121PL
–
–
Note: See Section K for wall plates. See pages C-30 for
wiring diagrams. For accessories see pages C-23.
2.78"
(70.6)
HP Conversion Chart
15A
20A
30A
120V
.5 HP
1 HP
2HP
208V 240V
1.5HP 2HP
2HP
2HP
2HP
2HP
Dimensions in Inches (mm)
277VAC
2HP
2HP
2HP
www.hubbell-wiring.com
C-7
Switches
AC Switches
20 Ampere, 120-277 Volts AC
PresSwitch® Push Button Switches
1.50"
(38.1)
3.28"
(83.3) 2.38"
(60.5)
.94" (23.9)
.97" (24.6)
2.44"
(62.0)
#6-32 TAP
HBL1281
Specification Grade, Side Wired Only
Standard Type
20A, 120-277V AC
Description
Brown nylon actuator.
Ivory nylon actuator.
Catalog Numbers
Single Pole Double Pole Three Way Four Way
HBL1281
HBL1282
HBL1283* HBL1284*
HBL1281I HBL1282I
HBL1283I* HBL1284I*
Momentary Type
20A, 120-277V AC
Description
Circuit normally closed, brown.
Circuit normally open, brown.
Catalog Numbers
Single Pole Double Pole Three Way Four Way
HBL1281MC* –
–
–
HBL1281MO* –
–
–
Lighted and Pilot Light PresSwitches,
120V AC Lighted Actuator (light on with load off)
Description
15A, ivory nylon actuator.
20A, ivory nylon actuator.
1.50"
(38.1)
Catalog Numbers
Single Pole Double Pole Three Way Four Way
–
–
–
HBL1259I*
HBL1287I
–
HBL1288I*
–
.94" (23.9)
.97" (24.6)
20A, 120V AC Pilot Light Actuator (light on with load on)
3.28"
(83.3) 2.38"
(60.5)
2.44"
(62.0)
#6-32 TAP
Push Button PresSwitch®
HBL1297
Catalog Numbers
Description
Single Pole Double Pole Three Way Four Way
Red nylon actuator.
HBL1297
–
HBL1298*
–
Notes: See Section K for wallplates.
See pages C-30 and C-31 for wiring diagrams.
For accessories see pages C-23–C-25.
*Not Listed by UL or CSA.
HP Conversion Chart
15A
20A
30A
C-8
120V
.5 HP
1 HP
2HP
208V 240V
1.5HP 2HP
2HP
2HP
2HP
2HP
www.hubbell-wiring.com
277VAC
2HP
2HP
2HP
Dimensions in Inches (mm)
Switches
AC Switches
15, 20 and 30 Ampere, 120-277 Volts AC
Industrial – Institutional, Heavy Duty Specification Grade Three Position,
Two Circuit, Center Off, Maintained Contact Switches
1.31
(33.2)
1.25
(31.8)
#6-32
TAP
Maintained Contact, Specification Grade, Back and Side Wired,
Three Position, Two Circuit, Center Off
Single Pole, Double Throw
Description
Brown nylon toggle.
Ivory nylon toggle.
White nylon toggle.
Catalog Numbers
15A
120-277V AC
HBL1381
HBL1381I
–
20A
120-277V AC
HBL1385
HBL1385I
HBL1385W
30A
120-277V AC
–
–
–
2.37
(60.2)
3.28
(83.3)
HBL1381
Double Pole, Double Throw
Catalog Numbers
15A
20A
30A
Description
120-277V AC
120-277V AC
120-277V AC
Brown nylon toggle.
HBL1382
HBL1386
HBL1388
Ivory nylon toggle.
HBL1382I
HBL1386I
HBL1388I
Lock type.
–
HBL1386L
–
Key for lock switches.
HBL1209
Notes: Keys supplied with each lock switch. For extra keys order HBL1209.
See page C-31 for wiring diagrams. For accessories see pages C-23–C-25.
For technical data see page C-26.
#6-32
TAP
1.31
(33.2)
1.25
(31.8)
2.37
(60.2)
3.28
(83.3)
HBL1386I
AC Three Position, 2 Circuit Center Off Toggle
Dimensions in Inches (mm)
www.hubbell-wiring.com
C-9
Switches
AC Dimmers
600 to 2000 Watts, 120 Volts AC 60 Hz
2.75"
(70.0)
Architectural Grade Preset Slide Control
4.50"
(114.3)
600 and 1000W Dimmer
Fits Single-Gang Wall Boxes.
AS63 and AS103
4.50"
(114.3)
4.50"
(114.3)
Rating/Description
Color
Catalog Numbers
Incandescent
600W, 120V AC, 60 Hz,
White
AS63
Control
Single pole/three way - preset.
1000W, 120V AC, 60 Hz,
White
AS103
Single pole/three way - preset.
1500W, 120V AC, 60 Hz,
White
AS153
Single pole/three way - preset.
2000W, 120V AC, 60 Hz,
White
AS203
Single pole/three way - preset.
Accessories
Small plate kit for 600W
Ivory
AS1I
and 1000W models. Includes
White
AS1W
non-metallic trimplate and slide.
Large plate kit for 1500W
Ivory
AS2I
and 2000W models. Includes
White
AS2W
non-metallic trimplate and slide.
Note: The dimmers listed above can be wired for single pole or three way applications.
1500 and 2000W Dimmer
Fits Single-Gang Wall Boxes.
AS153 and AS203
2.75"
(70.0)
Architectural Grade Rotary Models
4.50"
(114.3)
600 and 1000W Dimmer
Fits Single-Gang Wall Boxes.
AR61 and AR101
4.50"
(114.3)
AC Dimmers
4.50"
(114.3)
Rating/Description
Incandescent
600W, 120V AC, 60 Hz.
Control
Single pole - push on/off.
Three way - push on/off.
1000W, 120V AC, 60 Hz.
Single pole - push on/off.
Three way - push on/off.
1500W, 120V AC, 60 Hz,
Single pole, rotary on/off.
2000W, 120V AC, 60 Hz,
Single pole, rotary on/off.
Accessories
Small plate kit for 600W
and 1000W models. Includes
non-metallic trimplate and knob.
Large plate kit for 1500W
and 2000W models. Includes
non-metallic trimplate and knob.
Note: See page C-29 for ganging and derating.
Color
Catalog Numbers
Beige
Beige
AR61
AR63
Beige
Beige
Beige
AR101
AR103
AR151
Beige
AR201
Beige
White
AR1BE
AR1W
Beige
White
AR2BE
AR2W
1500 and 2000W Dimmer
Fits Single-Gang Wall Boxes.
AR151 and AR201
C-10
www.hubbell-wiring.com
Dimensions in Inches (mm)
Switches
AC Dimmers
600 to 1000 Watts, 120 Volts AC 60 Hz
120V AC 60 Hz Fan Control
Specification Grade Preset Slide Control
Rating/Description
Incandescent
600W 120V AC, 60 Hz,
Control
Single pole - preset.
600W 120V AC, 60 Hz,
Three way - preset.
1000W 120V AC, 60 Hz,
Single pole - preset.
Color
Catalog Numbers
Ivory
S61I
White
S61W
Ivory
S63I
White
S63W
Brown
S11BR
Ivory
S11I
White
S11W
Gray
S11GY
Black
S11BL
1000W 120V AC, 60 Hz,
Ivory
S13I
Three way - preset.
White
S13W
Gray
S13GY
Notes: Use Style Line® wall plates with preset slide control dimmers. See page C-29
for ganging and derating.
2.13"
(54.1)
4.13"
(104.9)
600 and 1000W Dimmer
Fits Single-Gang Wall Boxes.
S61I and S11I
Rotary Model
Rating/Description
Color
Catalog Numbers
Incandescent
600W 120V AC, 60 Hz.
Control
Single pole - push on/off.
Ivory
R61I
Three way - push on/off.
Ivory
R63I
Fan Speed
5A, 120V AC, 60 Hz,
Ivory
RF5I
Control
Single pole.
Accessories
Replacement knob.
Ivory
RKI
Replacement knob.
White
RKW
Notes: Use standard toggle switch wall plates with rotary dimmers. See page C-29 for
ganging and derating.
1.31"
(33)
2.13"
(54.1)
1.31"
(33)
4.13"
(104.9)
600W Dimmer
Fits Single-Gang Wall Boxes.
R61I
AC Dimmers
Dimensions in Inches (mm)
www.hubbell-wiring.com
C-11
Switches
Switches
Heavy Duty Panel Mount
Bat Handle Switches
10A 250V AC 20A 125V AC Horsepower Rated 3/4 HP, 125-250V AC
Description
Single pole/
single throw.
Terminal
Screw
Spade
Catalog Numbers
HBL11
HBL11SP
OF .61" (15.5)
F
1.13"
(28.7)
ON
HBL11
.56"
(14.2)
Screw Terminal Shown
Single pole/
single throw
momentary.
Screw
Spade
HBL11M
HBL11SPM
OF .61" (15.5)
F
1.13"
(28.7)
ry
nta
me
Mo
ON
.56"
(14.2)
Screw Terminal Shown
Single pole/
double throw.
Screw
Spade
HBL12
HBL12SP
.61" (15.5)
ON
1.13"
(28.7)
ON
.56"
(14.2)
Screw Terminal Shown
HBL123SP
Single pole/
double throw
3-position
center off.
Screw
Spade
HBL123
HBL123SP
.61" (15.5)
ON
1.13"
(28.7)
OFF
ON
.56"
(14.2)
Screw Terminal Shown
Specifications
Impact Resistant Thermoplastic Body.
Fine Silver Contacts.
Knurled Nut, Hex Nut And Strap All
Nickel Plated.
Keyed Brass Bushing Nickel Plated.
Brass Toggle Nickel Plated.
Choice of Terminal Design:
.250” (6.3) Male Tab Spade Type or 6/32
Screw Type.
UL Recognized.
.61"
M
Single pole/
Screw
ON oment (15.5)
ary
double throw
Spade 1.13"
OFF
(28.7)
3-position
y
tar
center off
ONomen
M
Screw Terminal Shown
momentary.
Note: All threaded stems 15 /32”–32 thread.
HBL123MM
HBL123SPMM
.56"
(14.2)
10A 240V AC 15A 120V AC
Description
Single pole/
single throw.
Terminal
Screw
ON
OF
Catalog Number
HBL118
F
0.62" (15.7)
1.78"
0.48" (12.2) (45.2)
0.31" (7.9)
0.37" (9.4)
0.56" (14.2)
0.67" (17.0)
Note: 15 /32”–32 thread.
Panel Mount Switches
4A 250V 8A 125V 10A 120V AC 1/3 HP 120V AC
Description
Single pole/
single throw.
Terminal
#18 Std
AWG
Copper Wire
Leads 105° C
Black.
Catalog Number
HBL11WL
0.56"
(14.2)
OFF
15/32-32 THRD
Keyway
.080 x .035
0.25"
(6.4)
0.98"
(24.9)
6.00"
(152.4)
0.50"
(12.7)
0.64"
(16.3)
Note: 15/32”–32 thread, keyway .080x.035.
C-12
www.hubbell-wiring.com
Dimensions in Inches (mm)
Switches
Switches
Heavy Duty Panel Mount
Bat Handle Switches
10A 250V AC 20A 125V AC Horsepower Rated 11/2 HP, 125-250V AC
Description
Double pole/
single throw.
Terminal
Screw .75" (19.1)
Spade
.47" (11.9)
.80" (20.3)
ON
Catalog Numbers
HBL21
HBL21SP
1.30" (33.0)
Spade Terminal Shown
Double pole/
double throw.
Screw
Spade
HBL21
F
OF
.75" (19.1)
.80" (20.3)
ON
HBL22
HBL22SP
1.30" (33.0)
ON
Screw Terminal Shown
Double pole/
double throw
3 position
center off.
Screw
Spade
.75" (19.1)
.80" (20.3)
ON
HBL223
HBL223SP
1.30" (33.0)
OFF
ON
HBL223
Screw Terminal Shown
Double pole/
double throw
3 position
center off
momentary.
Screw
Spade
.75" (19.1)
.80" (20.3)
Mo
ON
me
nta
ry
1.30" (33.0)
OFF
ON
Screw Terminal Shown
HBL223MM
HBL223SPMM
y
r
nta
me
Mo
Silicone
SSB1
rubber boot.
Notes: All threaded stems 15 /32”–32 thread.
For information on 12V DC tapered handle switches see Section V, Marine
Electrical Products.
SSB1
4A 250V 8A 125V 10A 120V AC 1/3 HP 120V AC
Description
Single pole/
single throw.
Terminal
#18 Std
AWG
Copper Wire
Leads 105° C
Black.
Catalog No.
HBL11PBWL
{
{
HBL11PBWL
Panel Mount Switches
Note: 15 /32”–32 thread, keyway .080 x .034.
Dimensions in Inches (mm)
www.hubbell-wiring.com
C-13
Switches
Switches
Pendant Pushbutton Stations
IP44
SUITABILITY
PBS-Series Heavy Duty Pendant Pushbutton Stations NEMA 3R
Description
2 button, single speed.
2 button, two speed.
4 button, single speed.
4 button, two speed.
6 button, single speed.
6 button, two speed.
8 button, single speed.
8 button, two speed.
Product Dimensions, PBS Series
PBS6
Style
A
2 button
7.88” (200.0)
4 button
13.69” (347.6)
6 button
18.0” (457.2)
8 button
22.31” (566.7)
Housing: Yellow vinyl rubber.
Cable
Entrance
Threaded
1" NPT I.D.
(25.4)
1.125" O.D.
(28.6)
A
Catalog Numbers
PBS2
PBS4
PBS6
PBS8
Two-Speed Single Break
AC
35% PF
DC
IND
Voltage
120V
240V
125V
250V
Current
6A
3A
.4A
.2A
Single-Speed Double Break
AC
35% PF
DC
Voltage
120V
240V
125V
Current
6A
3A
1.1A
IND
250V
.55A
Pendent Pushbutton Stations
0.88"
(22.4)
Approx. Wt. Assembled
2.5 lbs
4.5 lbs
5.5 lbs
7.5 lbs
Contact Interrupting Ratings, PBS Series
3.50"
(88.9)
3.25"
(82.6)
Catalog Numbers
PBS2
PBS22
PBS4
PBS42
PBS6
PBS62
PBS8
PBS82
C-14
www.hubbell-wiring.com
Dimensions in Inches (mm)
Switches
Switches
Pendant Pushbutton Stations
PBS Series Parts and Accessories
Replacement Inserts
When the insert switches are in need of replacement,
simply unplug the old insert and plug in a new one.
Description
Single speed insert momentary N.O. and N.C.
On-Off insert (no mechanical interlock)
Momentary, start-stop, reset-stop.
3 speed insert, momentary. Used to a maximum of 3 speed points.
For five speed applications replace an existing terminal board
with the TB5 terminal board and replace an existing insert
with the five speed (MS5) insert.
5 speed insert, momentary. Used to a maximum of 5 speed points.
Catalog Numbers
PG2
PG6
PG2
PG6
MS2
MS5
MS2
MS5
Conversion Inserts
In addition to single speed and two speed applications,
preassembled units can be adapted to handle other applications.
TB2
Description
Catalog Numbers
Terminal board Catalog No. TB2 is required for
TB2
each insert switch PG2, PG6 and MS2.
Terminal board Catalog No. TB5 is required for insert switch MS5. TB5
Accessories
TB5
Description
Catalog Numbers
Indicator labels for replacement package contains 1 each:
PBSLP
hoist, trolley, bridge, forward-reverse, raise-lower, in-out, right left,
east-west, north-south, reset-stop, start-stop, power, main hoist,
aux. hoist, on-off, up-down.
Rubber button cover for replacement purposes.
PBSBC
120V red pilot light for 4, 6, and 8 button units only.
PBSPL1*
*Each pendant station can accommodate one of the pilot light in the
1.20” (30.6) diameter mounting hole.
PBSBC
PBSLP
Pendent Pushbutton Station Accessories
Kellems® Deluxe Aluminum Cord Fitting
Outdoor or indoors where subject to moisture, splash or submersion.
Kellems grips provide strain relief for multi-conductor cable.
Description
Cord Range
Catalog Numbers
Kellems grip.
Kellems grip.
.750-.875” (19 to 22.2)
.875-1.00” (22.2 to 25.4)
07401023
07401025
PBSPL1
07401023
Dimensions in Inches (mm)
www.hubbell-wiring.com
C-15
Switches
Switches
Pendant Pushbutton Stations
IP55
1.06"
(26.9)
SUITABILITY
Compact Pendant Stations, CPB2 Series NEMA 4X
Two Button
Description
Catalog Numbers
Single-speed normally open-normally closed
CPB20
without mechanical interlock.
Single-speed with mechanical interlock between pushbuttons.
CPB21
Two-speed with mechanical interlock between pushbuttons.
CPB22
Included with product: nylon cord grip and sealing washer (must be installed to achieve
NEMA 4X rating). Indication label pack. Cord dia. range .375”-.625” (9.5 - 15.9).
Ambient temperatures: 25°F - 140°F (32°C-60°C).
Typical applications: Package electric motor hoists. Remote control of machinery.
9.13"
(231.9)
2.38"
(60.5)
CPB21
Contact Ratings, CPB2 Series
Wiring Diagram CPB2 Series
N.O.1
Com.1
Bott.
N.O.2
Top
TAB
Two Speed*
CPB22
N.C.1
N.O.1
Voltage
120V
240V
125V
250V
Current
6A
3A
1.1A
.55A
Two-Speed
AC
35% PF
Voltage
120V
240V
Current
3A
1.5A
Bott.
Top
Single Speed*
CPB21
Com.1
Bott.
N.O.1
Ctr.
Top
Ctr.
Monmentary
(On / Off)
CPB20
Single Speed
AC
35% PF
DC
IND
N.O.2
Ctr.
Compact Pendent Pushbutton Stations
* Mechanical “floating ball” interlock
prevents activating both Pushbuttons
simultaneously.
C-16
www.hubbell-wiring.com
Dimensions in Inches (mm)
Switches
AC Switches
30 Ampere, 600 Volts AC
Industrial – Heavy Duty AC Manual Motor Controllers, Double and
Three Pole (Without Overload Protection) and Enclosures
IP44*
2.25"
(57.1)
1.12"
(28.4)
SUITABILITY
30A 600V AC Manual Motor Controllers
Double Pole
Description
30A, double pole, single throw, AC manual motor controller,
black nylon handle, side wired.
30A, double pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7832BW in HBL1390 Type 1 enclosure with non-metallic cover,
1 /2 ” and 3/4” knockouts on top, bottom and back of steel frame.
HBL7832BW in HBL1370 metal Type 1 enclosure.
HBL7832BW in HBL13R90 metal Type 3R enclosure.
Catalog Numbers
HBL7832
HBL7832BW
3.28"
(83.3)
2.38"
(60.5)
3.78"
(96.0)
(2) .20 Dia.
HBL1392BW
HBL7810BW
HBL1372BW
HBL13R92BW
Catalog Numbers
HBL7810UD
HBL7810BW
HBL1389BW
3.28"
(83.3)
2.38"
(60.5)
3.78"
(96.0)
HBL1379BW
HBL13R89BW
Description
Type 1 enclosure for 30A switch with non metallic cover (without switch)
with 1 /2 ” and 3/4” knockouts on top, bottom and back of steel frame.
Type 1 enclosure for 30A switch with metallic cover (without switch)
with 1 /2 ” and 3/4” knockouts on top, bottom and back of steel frame.
Type 3R metal enclosure without switch.
(2) .20 Dia.
4.72"
(119.9)
HBL13R90
Motor Rating
120V AC 240V AC 480V AC
2HP
5HP
10 HP
15HP
3HP
71 /2 HP
2.04"
(51.8)
2.75"
(69.9)
2.37"
(60.2)
SIDE VIEW
HBL13R89BW / HBL13R90
HBL13R92BW
1.50"
(38.1)
4 Knockouts
.50'' (12.7) Type
Noted ''B''
B
1.25"
(31.8)
2.00"
(50.8)
3.97"
(100.8)
4.52"
(114.8)
B
2.00"
(50.8)
3.00"
(76.2) 3.31"
(84.1)
2.62"
(66.5)
1.06"
(26.9)
Mounting
Surface
HBL1389BW
END VIEW
HBL13R89BW / HBL13R90
HBL13R92BW
(2) .13" (3.3)
Dia.Holes
.68"
(17.3)
4.40"
(111.8)
5.52"
(140.2)
2.41"
(61.2)
.91"
(23.1)
(2) .27" (6.9)
Dia. Holes
BACK VIEW
HBL1370/HBL1372BW/HBL1379BW
Dimensions in Inches (mm)
Phase
1
3
4.40"
(111.8)
3 Mounting
Feet with
.25" (6.4)
Dia. Hole
BACK VIEW
HBL13R89BW / HBL13R90
HBL13R92BW
2.44"
(62.0)
2.75"
(69.9)
(2) .50'' & .75"
Knockouts
600V AC
15HP
20HP
Mounting
Surface
.19"
(4.8)
2.41"
(61.2)
HBL1379BW
.50'' x .75''
Knockout
Each End
3.00"
(76.2)
HBL13R89BW
END VIEW
HBL1370/HBL1372BW/HBL1379BW
www.hubbell-wiring.com
C-17
Manual Motor Controllers and Enclosures
Notes:* Enclosure rating.
For technical data see page C-32
.09"
(2.3)
Mtg. Holes
3.20"
(81.3)
Catalog Numbers
HBL1390
HBL1370
(4)
#6-32
TAP
HBL7810UD
Enclosures
30A Double Pole
30A Three Pole
Mtg. Holes
2.25"
(57.1)
1.12"
(28.4)
Three Pole
Description
30A, three pole, single throw, AC manual motor controller,
black nylon handle, side wired.
30A, three pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7810BW in HBL1390 Type 1 enclosure with non-metallic cover,
1 /2 ” and 3/4” knockouts on top, bottom and back of steel frame.
HBL7810BW in HBL1370 metal Type 1 enclosure.
HBL7810BW in HBL13R90 metal Type 3R enclosure.
(4)
#6-32
TAP
Switches
Switches
AC Switches
30 Ampere, 600 Volts AC
Heavy Duty Manual Motor Controllers
“Suitable as Motor Disconnect”*
30A 600V AC Double Pole
Description
30A, double pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7832FWMD in HBL13R90MD Type 3R Enclosure.
Catalog Numbers
HBL7832FWMD
HBL13R92MD
30A 600V AC Three Pole
Description
30A, three pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7832FWMD in HBL13R90MD Type 3R Enclosure.
Note: for technical data, see page C-27
* When protected by 30A max RK5 fuses.
.09"
(2.3)
2.04"
(51.8)
2.75"
(69.9)
6.50"
(165.1) 2.37"
(60.2)
SIDE VIEW
HBL13R92MD / HBL13R89MD
Manual Motor Controllers and Enclosures
C-18
4 Knockouts
.50'' (12.7) Type
Noted ''B''
4.40"
(111.8)
B
1.25"
(31.8)
480V AC
10HP
15HP
B
2.00"
(50.8)
2.00"
(50.8)
BACK VIEW
HBL13R92MD / HBL13R89MD
Motor Rating
120V AC 240V AC
2HP
5HP
3HP
71 /2 HP
www.hubbell-wiring.com
3 Mounting
Feet with
.25" (6.4)
Dia. Hole
3.00"
(76.2) 3.31"
(84.1)
1.06"
(26.9)
Mounting
Surface
END VIEW
HBL13R92MD / HBL13R89MD
600V AC
15HP
20HP
Phase
1
3
Dimensions in Inches (mm)
Manual Motor Controllers and Enclosures
30A Double Pole
30A Three Pole
HBL13R89MD
Mounting
Surface
.19"
(4.8)
Product
Catalog Numbers
HBL7810FWMD
Switches
AC Switches
40 and 60 Ampere, 600 Volts AC
Industrial – Heavy Duty AC Manual Motor Controllers, Double and
Three Pole (Without Overload Protection) and Enclosures
3.38"
(85.9)
IP44*
SUITABILITY
40A 600V AC Manual Motor Controllers
Description
Catalog Numbers
40A, double pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7842
40A, three pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7843
Note: Catalog numbers HBL7842 & HBL7843 dimensions are the same as
HBL7810BW shown on C-17.
.40" #10
(10.2) -32
TAP
3.28"
(83.3)
2.38"
3.78"
(96.0) (60.5)
2.82"
(71.6)
2.31"
(58.7)
.20" DIA
(5.1)
1.5"
(38.1)
1.75"
(44.5)
HBL7862
60A 600V AC Manual Motor Controllers
Description
60A, double pole, single throw, AC manual motor controller,
black nylon handle, back wired.
Same as HBL7862 except front wired.
HBL7862FW in Type 3R enclosure.
60A, three pole, single throw, AC manual motor controller,
black nylon handle, back wired.
Same as HBL7863 except front wired.
HBL7863FW in a Type 3R enclosure.
Note: For technical data, see page C-27.
3.38"
(85.9)
Catalog Numbers
HBL7862
HBL7862FW
HBL16R92
HBL7863
HBL7863FW
HBL16R93
.40"
(10.2)
3.28"
(83.3)
2.38"
3.78"
(96.0) (60.5)
2.82"
(71.6)
2.31"
(58.7)
.20" DIA
(5.1)
1.5"
(38.1)
4.40"
(111.8)
Description
Catalog Number
Type 3R metal enclosure without switch.
HBL16R90
Note: 40 and 60A manual motor controllers are suitable for use with enclosure
cat. no. HBL16R90.
* Enclosure rating.
Motor Rating
40A Double Pole
40A Three Pole
60A Double Pole
60A Three Pole
120V AC
2HP
3HP
-
240V AC
5HP
71 /2 HP
10HP
10HP
480V AC
10HP
15HP
15HP
25HP
600V AC
15HP
20HP
20HP
30HP
10.11"
(256.8)
Phase
1
3
1
3
HBL16R93
3 Mounting
Feet with
.25" (6.4)
Dia. Hole
.09"
(2.3)
.19"
(4.8)
4.40"
(111.8)
2.75"
(69.9)
A
4 Knockouts
.75'' x 1''
Typ. Noted ''A''
A
A
A
1.70"
(43.2)
3.00"
(76.2)
2.00"
(50.8)
3.31"
(84.1)
10.11"
(256.8)
3.00"
(76.2)
1.52"
(38.6)
Mounting
Surface
2.00"
(50.8)
BACK VIEW
HBL16R90/HBL16R92/HBL16R93
Dimensions in Inches (mm)
END VIEW
HBL16R90/HBL16R92/HBL16R93
www.hubbell-wiring.com
SIDE VIEW
HBL16R90/HBL16R92/HBL16R93
C-19
Manual Motor Controllers and Enclosures
Product
3.25"
(82.6)
1.75"
(44.5)
HBL7862FW
Enclosure Only
4.75"
(120.7)
#10
-32
TAP
Switches
AC Switches
Switched Enclosures
Circuit-Lock® 30, 60, and 100 Ampere Unfused Disconnect Switch
“Suitable as Motor Disconnect”
UL Listed, CSA Certified TYPE 4, 4X and
12K Enclosure Rating
IP67
Adjustable mounting feet.
SUITABILITY
Stainless steel
hardware for
corrosion resistance.
Non-metallic
enclosure –
nonconducting.
Internal frame
automatically
bonds all grounds.
Lockable handle to
meet OSHA
Lockout Tagout
regulations.
The Circuit-Lock Disconnect Switch meets NEC
Article 430 requirements for a separate
disconnect means within sight of all motor loads.
In addition, the enclosure offers the ability to lock
directly wired motor loads in the “OFF” position to
comply with OSHA Lockout/Tagout regulations.
This safety enclosure is Type 4X (Washdown,
Corrosion resistant) and is also suitable for use
with metallic conduit. The switch is mounted on
an internal frame that is integral with the
enclosure and bonds all grounds, and it accepts
auxiliary contacts that can be used to signal PLC
controllers.
Circuit-Lock Unfused
Disconnect Switch
Dimensions
Ordering Information 30A, 60A and 100A
Description
30A Circuit-Lock disconnect switch.
30A Circuit-Lock disconnect switch with aux. contact.*
60A Circuit-Lock disconnect switch.
60A Circuit-Lock disconnect switch with aux. contact.*
100A Circuit-Lock disconnect switch.
100A Circuit-Lock disconnect switch with aux. contact.*
Catalog Numbers
HBLDS3
HBLDS3AC
HBLDS6
HBLDS6AC
HBLDS10
HBLDS10AC
A
B
C
.87"
(22.1)
G
ON
D
OFF
E
F
Auxiliary Contacts for 30A, 60A & 100A switch, A600 pilot duty
Description
Break before break.
Break after break.
Catalog Numbers
HBLAC1
HBLAC2
Unfused Disconnect Switches
Ground Block
Description
For 30A switch.
For 60 & 100A switch.
Catalog Numbers
HBL30RGB
HBL60100RGB
Neutral Block
Description
For 30A switch.
For 60A switch.
For 100A switch.
Catalog Numbers
HBL30RNB
HBL60RNB
HBL100RNB
Replacement Switch
Description
For 30A switch.
For 60 & 100A switch.
Notes:
* Supplied with one HBLAC1
30A Units come with 3/4” NPT Hub
60A & 100A Units come with 1 1/4” NPT Hub
C-20
Catalog Numbers
HBLDS3RS
HBL60100RS
www.hubbell-wiring.com
Key
A
B
C
D
E
F
G
30A
inch
6.00
5.12
4.12
6.62
7.62
8.50
4.12
mm
152
130
105
168
194
216
105
60A/100A
inch mm
7.75
197
6.87
175
4.75
121
8.00
203
9.95
253
11.00 279
5.94
151
Horsepower Ratings
30A
60A 100A
Voltage
120V AC 1Ø
1
7.5
7.5
208V AC 1Ø
208-240V AC 1Ø
3
15
15
240-277V AC 1Ø
480V AC 1Ø
5
30
30
208V AC 3Ø
208-240V AC 3Ø
7.5
30
30
240V AC 3Ø
480V AC 3Ø
15
50
50
600V AC 3Ø
15
50
50
Note: See page C-30 for technical data.
Dimensions in Inches (mm)
Switches
Safety Devices
Switched Enclosures
Circuit-Lock® 30 and 60 Ampere Fused Disconnect Switch
“Suitable as Motor Disconnect”
Stainless steel hardware.
Adjustable mounting feet.
Non-metallic enclosure – safer - nonconducting.
Fused disconnect switch accepts Class “J” fuses.
Safety interlocked fuse access door.
Removable door for easier wiring.
Lockable high visibility red handle to meet OSHA Lockout/Tagout.
Circuit-Lock Fused
Disconnect Switch
The Circuit-Lock Fused Disconnect
Switch provides fused switched control of
a directly wired load. The switch cannot
be turned “ON” unless the enclosure
cover is closed. The fuses cannot be
accessed until the switch is turned “OFF”.
The fuse holder accepts Class “J” fuses.
This enclosure is non-metallic and is
listed for Outdoor/Indoor (Type 4X
Washdown, Corrosion resistant). The
handle can be locked in the “OFF”
position to comply with OSHA
Lockout/Tagout regulations.
Dimensions
7.27"
(184.7)
15.03"
(381.8)
11.46"
(291.6)
3.60"
(91.4)
10.18"
(258.6)
9.31"
(236.5)
7.19"
(182.6)
12.37"
(314.2)
14.48"
(367.8)
15.36"
(390.1)
Dimensions in Inches (mm)
www.hubbell-wiring.com
C-21
Fused Disconnect Switches
8.43"
(214.1)
Switches
Safety Devices
Switched Safety Enclosures
Circuit-Lock® 30 and 60 Ampere Fused Disconnect Switch
UL Listed, CSA Certified
TYPE 4, 4X and 12 Enclosure Rating
IP67
SUITABILITY
Ordering Information 30A & 60A
Ratings
30A
600V AC
Max.
Volts
120V AC
208-240V AC
240V AC 3Ø
480V AC 3Ø
600V AC 3Ø
120/208V AC 3Ø Y
277/480V AC 3Ø Y
347/600V AC 3Ø Y
60A
120V AC
600V AC
208-240V AC
Max.
240V AC 3Ø
480V AC 3Ø
600V AC 3Ø
120/208V AC 3Ø Y
277/480V AC 3Ø Y
347/600V AC 3Ø Y
*Requires time delay fuses.
Std. HP
0.5
1.5
3.0
5.0
7.5
3.0
5.0
7.5
1.5
3.0
7.5
15.0
15.0
7.5
15.0
15.0
Max. HP*
2.0
3.0
7.5
15.0
20.0
5.0
15.0
20.0
3.0
7.5
15.0
30.0
40.0
15.0
30.0
40.0
Catalog
Numbers
FDS30
FDS60
Auxiliary Contacts
Description
Auxiliary contact normally open, A600 pilot duty.
Auxiliary contact normally closed, A600 pilot duty.
Catalog Numbers
ACFSNO
ACFSNC
Fuse & Short Circuit Information
The starting current of motors of more than the standard
horsepower rating may require the use of fuses with
appropriate time-delay characteristics.
Short Circuit Withstand Rating Suitable for use on a circuit capable of delivering not
more than 100,000 RMS symmetrical amperes at the
voltage rating of receptacle when protected by Class “J”
fuses.
Replacement fused switch must be the same type Hubbell switch as original and have equal or greater short circuit current withstand rating.
Note: See page C-32 for technical data.
Fused Disconnect Switches
Horsepower Ratings
C-22
www.hubbell-wiring.com
Dimensions in Inches (mm)
Switches
AC Switches
Accessories
Nylon and Metal Wall Plates
Standard Size, Smooth Nylon Switch Plates
Gangs
Brown
Ivory
Gray
White
Red
Black
Office White
1
2
3
P1X
P2X
P3X
P1
P2
P3
P1G
P2G
P3G
P1W
P2W
P3W
P1R
P2R
P3R
P1B
P2B
P3B
P1OW
P2OW
P3OW
One-gang
1 toggle switch
Standard Size, Smooth Nylon Style Line® Switch Plates
Gangs
1
2
3
Brown
HPS1
HPS2
HPS3
Ivory
HPS1I
HPS2I
HPS3I
Gray
HPS1GY
HPS2GY
HPS3GY
White
HPS1WA
HPS2WA
HPS3WA
Red
HPS1R
HPS2R
–
Black
HPS1B
HPS2B
HPS3B
Office White
HPS1OW
HPS2OW
HPS3OW
Two-gang
2 toggle switches
Standard Size, Smooth Metal Switch Plates
Gangs
1
2
3
Stainless Steel
S1
S2
S3
Brass
B1
B2
B3
Aluminum
A1
A2
*
Three-gang
3 toggle switches
Standard Size, Smooth Metal, Style Line Switch Plates
Gangs
Stainless Steel
Brass
1
S26
B26
2
S262
B262
3
S263
B263
Note: See Section K for full line of wall plates.
* Available as a custom metal wall plate, see page K-29
Aluminum
*
*
*
One-gang
Two-gang
Three-gang
Accessories
Dimensions in Inches (mm)
www.hubbell-wiring.com
C-23
Switches
AC Switches
Accessories
Red Neon Pilot Light and
Brass Locking Attachment and Lockout Devices for Toggle Switches
Pilot Light, 120-277V AC
Description
Red neon pilot light, back & side wired, fits standard switch plate.
Catalog Number
HBL1220RJ
HBL1220RJ
Brass Locking Attachment for Switches Available in
Master Keying and Straight Keying Systems
HBL96061
shown with wallplate and switch
HSLDPK2
Description
Catalog Numbers
Straight keying (all locks alike). Appropriate for most applications. HBL96061*
Straight cylinder type lock, each HBL96061 ordered operates on the
same key. All locks are keyed alike.
Straight keying (individual). Straight cylinder type lock, each HBL96062 HBL96062
ordered operates on a different key. All locks are keyed differently
and individually. This type cannot be master keyed.
Master keying (individual). Cylinder type lock for master keying,
HBL96060
each lock keyed individually with a master key to operate all locks.
Notes: *Also available in dull chrome finish to match stainless steel.
Add “DCH” suffix to catalog number.
SWITCHOUT™ Lockout Device
Description
Catalog Number
Yellow nylon, toggle switch lockout device.
HSLDPK2**+
Notes: For more information on safety lockout devices, see Section U.
+ Two devices per package.
**Not UL or CSA Listed.
Accessories
HSLDPK2
C-24
www.hubbell-wiring.com
Dimensions in Inches (mm)
Switches
AC Switches
Accessories
Weatherproof Switch Plates
IP44
1.88"
(47.8)
.94"
(23.9)
SUITABILITY
Weatherproof Plates
Description
Clear bubble plate, silicone rubber for use with all general
purpose AC toggle and PresSwitches® switches. Fits both
FS/FD and standard boxes.
Catalog Number
HBL1795
4.63"
(117.6)
3.25"
(82.6)
2.38"
(60.5)
2.94"
(74.7)
HBL1795
Weatherproof Plates
Description
Gray neoprene PresSwitch plate. Fits FS/FD and standard boxes.
Same as above except yellow.
Note: *Not listed by Underwriter’s Laboratories Inc.
1.88"
(47.8)
.94"
(23.9)
Catalog Numbers
HBL1750*
HBL17CM50*
4.63"
(117.6)
2.38"
(60.5)
3.25"
(82.6)
2.94"
(74.7)
HBL1750
Weatherproof Plates
Description
Gray neoprene PresSwitch plate with 125V red pilot light.
Fits only FS/FD boxes.
Same as above except yellow.
Note: *Not listed by Underwriter’s Laboratories Inc.
.94"
(23.9)
Catalog Numbers
HBL1785*
1.88"
(47.8)
4.63"
(117.6)
2.38"
(60.5)
HBL17CM85*
3.25"
(82.6)
2.94"
(74.7)
HBL1785
Weatherproof Plates
Description
Cast aluminum lift cover plate with fiber shield.
For standard toggle and PresSwitches. Fits only FS/FD boxes.
Note: See Section K for full line of wall plates.
2.84
(72.1)
Catalog Number
HBL7420
3.25" 4.56"
(82.6) (115.8)
Accessories
.19 dia.
4 holes
(4.8)
1.89
(48.0)
HBL7420
Dimensions in Inches (mm)
www.hubbell-wiring.com
C-25
Switches
AC Switches
Technical Information
Industrial Heavy Duty Specification Grade Switches
SP, DP, 3-Way, 4-Way
Specifications
Listings
UL Listed
CSA Certified
Verified to Fed. Spec. W-S-896,
SP, DP, 3-way and 4-way
Component
Base
Top
Toggle
Terminals
Terminal Screws
Mounting Bridge
Contacts
Moveable Contact Arm
Rocker
Ground Terminal
Ground Screw
Automatic Grounding Clip
Material
Thermoset, Color Coded by Amperage
Thermoset, Gray
Nylon
Brass
Brass
Nickel Plated Steel
Silver Cadmium Oxide
Copper Alloy
Thermoplastic Elastomer
Nickel-Plated Steel
Brass
Stainless Steel
Performance Data
Electrical
Dielectric Voltage
Max. Working Voltage
Overload
Temperature Rise
Max. Continuous Current
Endurance
Mechanical
Terminal Accommodations
#14 AWG min. - #10 AWG max. solid and stranded wire.
UL 94V-2.
Max. continuous: 75° C;
Min. continuous: -40° C w/o impact.
Switch Technical Information
Environmental
Flammability
Operating Temperature
Withstands 1500V AC minimum for 1 minute.
277V AC
Minimum 4.8 times rated current for 100 cycles.
30° C maximum at rated current.
15A, 20A, 30A.
50,000 cycles min., tungsten filament
lamp load Fed. Spec. #WS896, SP, DP, 3-way and 4-way.
C-26
www.hubbell-wiring.com
Dimensions in Inches (mm)
Switches
AC Switches
Technical Information
Heavy Duty Manual Motor Controllers
30, 40 & 60A, Double Pole and Three Pole
Specifications
Listings
UL Listed 508 Industrial Control Equipment
CSA-C22.2 No. 14 Industrial Control Equipment
30A Suitable as Motor Disconnect
UL File E70402
CSA File LR-46186
Component
Base
Cover
Yoke
Toggle
Terminal Screws
Contact Blades
Contacts
Brush Lifter
Material
Thermoset
Thermoset
Zinc Plated Steel
Nylon
Brass
Brass
Silver Cadmium Oxide
Polycarbonate
Performance Data
Electrical
Dielectric Voltage
Electrical Life (Minimum)
Working Voltage
Short Circuit Withstand Rating (Motor Disconnect)
Operating Temperature
Mechanical Life (minimum)
Terminal Torque (30A, 40A)
Terminal Torque (60A)
Mechanical
Terminal Accommodations
2,200V AC max for 1 minute.
6,000 cycles at rated switch parameters.
600V AC RMS.
5,000 and 10,000 RMS with RK5 fuses at rated switch value.
Min. continuous: -40° C w/o impact..
10,000 Cycles.
20 inch pounds.
25 inch pounds.
30A #14 AWG min. - #10 AWG max. solid and stranded wire.
40A #14 AWG min. - #8 AWG max. solid and stranded wire.*
60A #14 AWG min. - #4 AWG max. solid and stranded wire
Note: *Use listed/certified ring terminal.
Switch Technical Information
?????
Dimensions in Inches (mm)
www.hubbell-wiring.com
C-27
Switches
AC Switches
Listing Chart
UL, CSA, and Fed. Spec. Listing Data
Certification Chart
Catalog
Numbers
CS115
CS315
CS120
CS320
CS1201
CS1203
CS1221
CS1222
CS1223
CS1224
HBL1201
HBL1202
HBL1203
HBL1204
HBL1201IL
HBL1203IL
HBL1201PL
HBL1203PL
HBL1201L
HBL1202L
HBL1203L
HBL1204L
HBL1221
HBL1222
HBL1223
HBL1224
HBL1221L
HBL1222L
HBL1223L
HBL1224L
HBL1221IL
HBL1222I
HBL1223IL
HBL1221PL
HBL1222PL
HBL1223PL
HBL1259I
HBL1281
HBL1282
HBL1283
C-28
C-26
Federal Spec.
WS896 Listed
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
UL Listed
UL20
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
CSA
Certified
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Catalog
Federal Spec.
UL Listed
CSA
Numbers
WS896 Listed
UL20
Certified
HBL1284
No
No
No
HBL1287I
No
Yes
Yes
HBL1288I
No
No
No
HBL1281MO
No
No
No
HBL1281MC
No
No
No
HBL1297
No
Yes
Yes
HBL1298
No
No
No
HBL1381
No
Yes
Yes
HBL1382
No
Yes
Yes
HBL1385
No
Yes
Yes
HBL1386
No
Yes
Yes
HBL1386L
No
Yes
Yes
HBL1388
No
Yes
Yes
HBL1556
No
Yes
Yes
HBL1557
No
Yes
Yes
HBL1556L
No
Yes
Yes
HBL1557L
No
Yes
Yes
HBL3031
Yes
Yes
Yes
HBL3032
Yes
Yes
Yes
HBL3033
Yes
Yes
Yes
HBL3031PL
Yes
Yes
Yes
HBL3032PL
Yes
Yes
Yes
HBL2101
No
Yes
Yes
HBL2103
No
Yes
Yes
HBL2121
No
Yes
Yes
HBL2122
No
Yes
Yes
HBL2123
No
Yes
Yes
HBL2124
No
Yes
Yes
HBL2123IL
No
Yes
Yes
HBL2121PL
No
Yes
Yes
HBL7832
No
Yes*
Yes
HBL7832BW
No
Yes*
Yes
HBL7810UD
No
Yes*
Yes
HBL7810BW
No
Yes*
Yes
HBL7842
No
Yes*
Yes
HBL7843
No
Yes*
Yes
HBL7862
No
Yes*
Yes
HBL7862FW
No
Yes*
Yes
HBL7863
No
Yes*
Yes
HBL7863FW
No
Yes*
Yes
Notes: Catalog numbers above represent all colors and
variations.
* Motor starting switches are listed to UL508.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Switches
AC Dimmers
Technical Data
Dimmer – Ganging and Derating
Architectural Grade Slide and Rotary Series
Switchboxes Required: Side Sections Intact
Number of Small Controls (600W & 1000W)
0
1
2
3
4
5
6
Number of
0
0
1
1+1
4
1+4
7
1+7
Large Controls
1
1
3
5
6
8
9
11
(1500W & 2000W)
2
4
6
7
9
10
12
13
3
6
8
10
11
13
14
16
4
9
11
12
14
15
17
18
Note: When ganging an even number of small controls with no side sections removed
(plus numbers in chart), use gangable switchboxes with tapped ears as shown
below. Do not use plaster rings or gangbox covers. Space an additional
switchbox 3/4” apart from the other switchbox(es). A 3/4” close nipple is
recommended as a spacer between the switchboxes.
Example of four-gang installation
Three small dimmers in this box.
Four-Gang Gangable
Switchbox
One
small
dimmer
in this
box.
Single-Gang
Gangable
Switchbox
3/4 Space
(Use Close Nipple)
Switchboxes Required: Side Sections Removed
Number of Small Controls (600W & 1000W)
0
1
2
3
4
5
6
Number of
0
0
1
2
3
4
5
6
Large Controls
1
1
3
4
5
6
7
8
(1500W & 2000W)
2
3
5
6
7
8
9
10
3
5
7
8
9
10
11
12
4
7
9
10
11
12
13
14
Note: When removing side sections, remove only inner side sections. Do not remove
side sections on outer ends of gang.
Same installation rules apply to rotary dimmers (not shown).
Remove All Inner
Side Sections (Shaded)
Do Not
Remove Outer
Side Sections
Derating Chart
Dimmer Ganging and De-rating Chart
No side
One side
Both side
sections removed
section removed
sections removed
600W
600W
500W
1000W
900W
700W
1500W
1250W
1000W
2000W
1800W
1500W
Note: When ganging any combination of small and large controls, place a small
control on one extreme end of the gang, and a large control at the other end of
the gang. When ganging with side sections intact, use offset mounting holes.
When ganging with side sections removed, use center mounting holes. Allow a
1/32” gap (space) between controls for ease in attaching the faceplate.
Specification Grade Slide and Rotary Series
Switchboxes Required: Side Sections Removed.
Derating Chart
1 dimmer
in wall box
600W
1000W
5A fan speed
Dimensions in Inches (mm)
2 dimmers
in wall box
500W
800W
4A
3 or more dimmers
in wall box
400W
650W
3A
www.hubbell-wiring.com
C-29
Switches
AC Switches
Toggle Switch Wiring Diagrams
Standard Toggle Type Switches
SINGLE POLE
2 POLE
3 WAY TO 3 WAY
3 WAY
4 WAY
3 WAY
L
L
L
L
LINE
BLACK
LINE
NEUTRAL
WHITE
NEUTRAL
Lighted Switches (light on with load off)
SINGLE POLE LIGHTED
3 WAY LIGHTED
L
L
L
L
LINE
BLACK
NEUTRAL
WHITE
Pilot Light Switches (light on with load on)
SINGLE POLE PILOT
DOUBLE POLE PILOT
M
L
L
Switch Wiring Diagrams
L
C-30
LINE
BLACK
NEUTRAL
WHITE
www.hubbell-wiring.com
Dimensions in Inches (mm)
Switches
Switches
AC Switches
Toggle Switch Wiring Diagrams
Three Way Pilot Switches
B
L
K
B
L
K
B
W
H
T
LINE 1
B
W
H
T
BLACK
L
O
A
D
NEUTRAL WHITE
LINE 2
RED
Three Position Switches, Momentary and Maintained
DPDT
CENTER OFF
L-2
B-1
B-2
A-1
A-2
STRIP
GAGE
STRIP
GAGE
SPDT
CENTER OFF
M
L-1
L
L
LINE 1
M
BLACK
NEUTRAL WHITE
LINE 2
RED
Switch Wiring Diagrams
?????
Dimensions in Inches (mm)
www.hubbell-wiring.com
C-31
Switches
AC Switches
Technical Information
Switched Safety Enclosures
Circuit-Lock® Unfused Disconnect Switch
Specifications
Moisture Resistance
Flammability
Operating Temperature
UV Resistance
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand Rating (Motor Disconnect)
Terminal Identification
Product Identification
Mounting
Impact Resistance
Outdoor – Type 4X (Washdown, Corrosion resistant), IP 66 suitability;
Indoor – 30A Type 12K (Dust-tight, Falling Dirt, Noncorrosive Liquids
with Knockout).
60 and 100A Type 12 (Dust-tight, Falling Dirt, Noncorrosive
Liquids).
UL94-5VA and V0 Classification.
Maximum Continuous +75°C;
Minimum Continuous -40°C.
All materials are UV stabilized.
Withstands 3000V AC minimum.
600V AC RMS.
Certified for current interrupting at full rated current and voltage.
Suitable for use on a circuit capable of delivering not more than 10,000
RMS symmetrical amperes, 600V AC max.
In accordance with UL, CSA and international conventions.
Identification and ratings are part of external label.
External fully adjustable feet.
In accordance with UL 746C.
Circuit-Lock Fused Disconnect Switch
Specifications
Moisture Resistance
Switched Enclosure Technical Information
Flammability
Operating Temperature
UV Resistance
Dielectric Voltage
Max. Working Voltage
Impact Resistance
Terminal Identification
Product Identification
Mounting
Fuse Types
Outdoor – Type 4X (Washdown, Corrosion resistant), IP 66 suitability;
Indoor - Type 12 (Dust-tight, Falling Dirt, Noncorrosive Liquids).
UL94-5VA and V0 Classification.
Maximum Continuous +75°C;
Minimum Continuous -40°C.
All materials are UV stabilized.
Withstands 3000V AC minimum.
600V AC RMS.
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Identification and ratings are part of external label.
External fully adjustable feet.
UL Listed, Class “J”; CSA Certified, HRCI-J.
Circuit-Lock Unfused and Fused Disconnect Switch
Materials
Part
Material
Base
Valox®
Top
Valox
Handle
Valox
Conduit Hub
Zinc Watertight 30A Unfused - 3 /4”, 30A Fused - 1”, 60/100A Unfused - 1 1 /4”
Enclosure Gasket
Neoprene
Shaft (Unfused)
Valox
Shaft (Fused)
Brass
Shaft Seal
Molded Neoprene
Frame
Galvanized Steel
Ground Plate (Fused)
Galvanized Steel
Enclosure Screws
Stainless Steel 300 Series
 Valox is a registered trademark of General Electric Company.
C-32
www.hubbell-wiring.com
Dimensions in Inches (mm)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement