www.osram-americas.com/LED LINEARlight FLEX® Colormix Flexible Colormixing LED Module – Indoor and Outdoor Key Features & Benefits —— Flexible circuit board with selfadhesive backing allows for easy installation in complex contours —— LEDs are closely spaced to minimize hot spots in shallow installations —— Low profile module enables mounting in compact spaces —— Dimmable by pulse width modulation, a method that maintains consistent lumen output and color —— Each Multi LED contains an individually powered red, green and blue chip; this unique method of colormixing achieves excellent color consistency and uniformity —— Modules can be field cut every 5 LEDs to achieve a customized fit —— Two versions are available: – Advanced: higher lumens – Protect: encapsulated IP67 rated for outdoor use —— 120° Beam angle The LINEARlight FLEX Colormix family is available in two varieties: Advanced and Protect to offer flexibility in luminaire design. The Advanced version is available in 13.1 ft with a total lumen output of 1883 (Red - 645, Green - 1025, Blue - 213). The encapsulated Protect version is 13.1 ft with a total lumen output of 1700 (Red - 625, Green 525, Blue - 467). This version is IP67 rated ensuring protection against dust, moisture, and condensation for outdoor operation. These modules can be cut every 5 LEDs at designated cut points for a custom fit for each installation. The major benefit to these modules is the ability to supply uninterrupted power from a single feed point through the entire reel. The LINEARlight FLEX Colormix family is optimally paired for operation on OPTOTRONIC® 24Vdc power supplies and control, and such systems are covered by a 5-year system warranty. The LINEARlight FLEX Colormix Advanced and Protect products are part of a UL2108 listed system allowing for direct install into applications. For more information on the components of this listed system please refer to the application note LED311. Product Offering Ordering Abbreviation LF05CA2-RGB3 L72LFE/24V/RGB3/LF05/CAP Family Wattage Advanced72 Protect72 Application Information Applications —— Accent lighting —— Colormixing —— Controlled color sequencing —— Cove lighting —— Custom color applications —— Edge lighting LED017R15 4-14 Specifications and Certifications The LINEARlight FLEX is UL8750 recognized for the US and Canada Class 2 Unit (UL File # E320662) C UL LISTED US The LINEARlight FLEX is UL2108 listed for US and Canada Class 2 Unit (UL File # E247649) Specification Data Catalog # Type Project Comments Prepared by Ordering Information Item Ordering European Part Module No. of Power Voltage Current Initial NumberAbbreviation Number Family Length LEDs (W) (Vdc) (Amps) Wavelength Lumens Watts/ft. 72618 LF05CA2-RGB3 LF05CA2-RGB3 Advanced 13.1 ft. 200 72 24 3 1883 5.5 Red Channel 28.81.2 625nm 645 2.2 Green Channel 22.00.9 525nm 1025 1.7 Blue Channel 19.20.8 465nm 213 1.5 71398 L72LFE/24V/RGB3/LF05/CAP LF05CA-RGB3-P Protect 13.1 ft 200 72 24 3 1740 5.5 Red Channel 26.71.1 625nm 447 2.0 Green Channel 37.91.6 525nm 1170 2.9 Blue Channel 7.50.3 467nm 90 0.6 Note: A ll data is related to entire module measured at Tc point of 25ºC. Data reflects statistical mean values. Actual data may differ depending on variances in the manufacturing process. End users need to take into account the lumen depreciation as the temperature rises with various thermal management solutions installed. Ordering Guide Advanced LF Product Family LINEARlight FLEX 05 Number of LEDs in Smallest Electrical Unit C Type Colormix A 2 -RGB3 Style Generation Colormix Advanced Red, Green, Blue Power Supply Information Max. feet # of parallel branches required Max. feet per branch Max. SEU's per branch OT 50W (51598) OT 75W (51514) OT 96W (51520, 51522, 51626) OT 240W (51627)* 1 1 2 2 (x3) 9.1 13.1 13.1;4.4 13.1;1.3 (x3) 28 40 40;13 40;4 9.1 13.1 17.5 14.4 (x3) *The OT240 has 3 output channels. Data is given for loading one 80W channel only. Minimum and Maximum Ratings ParameterValues Operating Temperature at Tc point -30 to +75°C (-22 to +167°F) Storage Temperature Range -40 to +85°C (-40 to +185°F) Voltage Range 23 – 25Vdc Reverse Voltage 25Vdc Notes: 1. Exceeding maximum ratings may damage the LED module and pose potential safety hazards. 2. Elevated operating temperatures can be expected to negatively impact the service life in terms of lumen output. 3. Incorrect wiring may damage the LED module. 4. Not intended for use with constant current power supplies. Accessories Min. Item Ordering European Length CaseOrder Number Abbreviation Part Number Description (inches) Qty. Qty. Track Accessories 72356 LAC-T/STS/7FT LF-LTS-2100 6.9' aluminium track 83 40 1 72357 LAC-M/STS/CLIP LF-LTS-MB Optional mounting bracket for track 1.1 280 35 72360 LAC-T/STS-COV/C/7FT LF-LTS-COVER-CLEAR 6.9' clear cover for track 83 40 1 72358 LAC-T/STS-COV/D/7FT LF-LTS-COVER-DIFFUSE 6.9' diffused cover for track 83 40 1 72359 LAC-S/STS/ENDCAP LF-LTS-ENDCAP End cap used only with 72358 0.8 160 20 72361 LAC-T/STS-COV/SP/7FT LF-LTS-COVER-SHORTPITCH 6.9' diffused cover specifically 83 40 1 designed for short pitch product Colormix Indoor - 72618 72670 LF-4PIN Flex SC LF-4PIN Flex SC Input connector 20 250 10 72671 LF-CONN Flex SC LF-CONN Flex SC Board to board connector piece 0.35 250 10 72947* LF-WIRE-30 FLEX SC LF-WIRE-30 FLEX SC 30mm connector wire 1.1 10,000 100 72948* LF-WIRE-150 FLEX SC LF-WIRE-150 FLEX SC 150mm connector wire 5.9 5000 50 *Use with 72671 Colormix Protect - 71398 72362 LAC-C/IP67/ENDCAP LF-ENDCAP PROTECT IP67 end cap - 100 10 72363 LF-CLIP-FIXTURE LAC-M/IP67/CLIP Optional flexible mounting bracket - 500 50 72365** LAC-C/IP67/IC/4P/20IN LF-4PIN PROTECT IP67 Input connector 20 50 5 72366 LAC-C/IP67/BB/4P/7IN LF-4CONN PROTECT IP67 Board to board connector 7 50 5 *Use with 72671 **Each LINEARlight FLEX Protect product comes with one pre-wired input connector. Note: For more information on installation see installation instructions with product. Assembly Diagram 1. A dvanced Version Size of entire module (L x W x H) 157" x 0.31" x 0.12" 0.08" [2.0] 157.48" (13.1') [4000] Total 0.39" [10.0] 0.31" [8.0] 0.79" [20.0] 3.94" [100.0] SEU 0.79" [20.0] Cut Point Cut Point Tc Point 2. Protect Version Size of entire module (L x W x H) 157" x 0.4" x 0.2" 0.2" [4.5mm] 0.4" [11mm] 3.9" [100mm] 157.5" [4000mm] 0.8" [20mm] Module cut points at the SEU is denoted by scissor marks printed on the side of the product Wiring Diagram All input Connections to be made in parallel * Denotes maximum length of LED run per branch as indicated in “Power Supply Information” section: • Architectural version- Maximum 13.1 ft (1 full reel) per power branch • ECO version - Maximum 19.7 ft (1 full reel) per power branch All input Connections to be made in parallel * Denotes maximum length of LED run per branch as indicated in “Power Supply Information” section: • Architectural version- Maximum 13.1 ft (1 full reel) per power branch • ECO version - Maximum 19.7 ft (1 full reel) per power branch All input Connections to be made in parallel * Denotes maximum length of LED run per branch as indicated in “Power Supply Information” section: • Architectural version- Maximum 13.1 ft (1 full reel) per power branch • ECO version - Maximum 19.7 ft (1 full reel) per power branch Safety Information WARNING: ONLY QUALIFIED PERSONNEL SHOULD PERFORM INSTALLATION. TO AVOID ELECTRICAL SHOCK OR COMPONENT DAMAGE, DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION OF THE POWER SUPPLIES AND/OR MODULES. Failure to install the power supplies and/or LED modules in accordance with the National Electric Code (NEC), all applicable Federal, State and local electric codes as well as the specific Underwriters Laboratories (UL) safety standards for the installation, location and application may cause serious personal injury, death, property damage and/or product malfunction. 1. T he LED module itself and all its components shall not be subjected to mechanical stress and assembly must not damage or destroy conducting paths on the circuit board. 2. Installation of LED modules shall be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. 3. O bserve correct electrical polarity, incorrect polarity may destroy the module. (For more information, reference document # LED093 ESD Protection for LED Systems.) 4. Electrostatic Discharge (ESD) precautions shall be incorporated when handling or installing the module. 5. Modules may be hot to the touch. Use caution when handling. Assembly Information 1. Installation of the LINEARlight FLEX® Colormix module must provide for thermal management to avoid premature failure of the product and to obtain expected service life. Service life (i.e. lumen depreciation) is primarily a function of LED temperature which is to be monitored on the circuit board at the designated Tc point temperature of 40ºC which should be sufficient to enable a service life of 50,000 hours. 2. In general, the LINEARlight FLEX Colormix module should be adhered to a flat, metal surface which has enough surface area to transfer the heat from the LED to the surrounding air. The metal surface can be part of the mass of the fixture itself. 3. The module should be attached securely to the intended substrate. To aid in installation, the module incorporates an adhesive backing, but screws or rivets are recommended to ensure a permanent fix. Do not over-tighten. Heavy vibration should be avoided. 4. The minimum bending radius is 2cm. The module may be bent over a smaller radius but only in regions of the circuit board containing no electronic components. Such bends should be made only once and fixed in position to avoid cyclic fatigue. WARNING: The low voltage secondary circuit shall not be grounded. This information shall not supersede the requirement to follow all other safety, assembly and any other instructions listed in this document. Installation of LED modules shall be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Warranty OSRAM LED products are covered by our LED Module, OPTOTRONIC® Power Supply or Control Warranty. The LINEARlight FLEX Colormix modules are covered under warranty as long as the temperature at the Tc point does not exceed 40°C; exceeding this temperature will void all warranties. For additional information or to download the warranty registration form, refer to the latest version of the warranty available in the Literature section of www.osram-americas.com/LED Module Warranty: 3 years System Warranty: 5 years Americas Headquarters 100 Endicott Street Danvers, MA 01923 USA Phone1-800-LIGHTBULB www.osram-americas.com OSRAM, OPTOTRONIC, LED CREATING TOMORROW and LINEARlight FLEX are registered trademarks of OSRAM GmbH. Specifications subject to change without notice. © 2014 OSRAM
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021