Sony PFM-42X1 Flat Panel Television User Manual

Sony PFM-42X1 Flat Panel Television User Manual
FLAT PANEL DISPLAY
PFM-42X1
PFM-42X1N
PROTOCOL MANUAL (User Control Only)
! WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
! WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
! AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
PFM-42X1/42X1N
Table of Contents
1. Communication Parameters ...................................................... 1-1
2. Pin Assignment .................................................................................. 1-1
3. Command Table ................................................................................. 1-2
1. General Function ............................................................................................. 1-2
(a) Mode control ....................................................................................... 1-2
(b) Color matrix ........................................................................................ 1-6
(c) Time control ........................................................................................ 1-7
2. Picture/Sound ................................................................................................... 1-8
(a) Picture/sound ....................................................................................... 1-8
(b) Color temperature .............................................................................. 1-10
(c) Color temperature name .................................................................... 1-11
3. Size/Shift ........................................................................................................ 1-12
(a) 16 bit register ..................................................................................... 1-12
(b) 8 bit register ....................................................................................... 1-12
4. Status Enquiry ................................................................................................ 1-14
(a) Model name enquiry ......................................................................... 1-14
(b) Serial number enquiry ....................................................................... 1-14
(c) Operation time enquiry ..................................................................... 1-14
(d) Software version enquiry .................................................................. 1-15
(e) H/V frequency enquiry ...................................................................... 1-15
(f) Sync polarity enquiry ........................................................................ 1-15
5. User Memory ................................................................................................. 1-17
(a) Load/save .......................................................................................... 1-17
(b) Memory name ................................................................................... 1-17
6. User Reset ...................................................................................................... 1-18
7. Answer ........................................................................................................... 1-19
(a) Normal message ................................................................................ 1-19
(b) Error message .................................................................................... 1-19
PFM-42X1/42X1N
1
1. Communication Parameters
Baud Rate
9600
Character length
8 bits
Parity
none
Stop bit length
1 bit
Flow control
none
2. Pin Assignment
Monitor side : D-sub 9pin (Female)
5
4
9
3
8
2
7
1
Host side : D-sub 9pin (Male)
5
6
4
9
3
8
2
7
1
6
Pin number
Function
Pin number
Function
1
NC
1
NC
2
RD
2
RD
3
TD
3
TD
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC
(Straight connection is necessary.)
PFM-42X1/42X1N
1-1
3. Command Table
1. General Function
(a) Mode control
Syntax
Header
Category
Control
0x8C
0x00
Enquiry
Execute Judge
Answer
Control
Function
Code Table (1-a) [a]
Data1
Data2
0x01
Code Table
(1-a) - [b]
0x83
0xFF
0xFF
0x89
0xFF
0xFF
Return Data Size
...
Header
Answer
Return Data1 Return Data2
0x70
0x00
Completed
0x70
0x01
Limit Over
0x70
0x02
Limit Under
0x70
0x03
Enquiry
0x70
0x00
0x01
Code Table
(1-a) - [b]
Execute Judge
0x70
0x00
Variable
Code Table
(1-a) - [b]
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
1-2
Command Canceled
Completed
...
...
Completed with Enable
Codes
PFM-42X1/42X1N
Code table (1-a)
[a] Function
0x00
0x01
0x02
0x03
Power
Input Select
Force Status Display
Audio Mute
0x04
Auto Status Display
0x05
Closed Caption
0x06
0x07
0x08
0x09
Color System
Auto Color System
Power Saving
ON/OFF Timer
PFM-42X1/42X1N
[b] Range/Switch code
0x00
OFF
0x01
ON
0x08
MON RGB 1
0x09
MON YUV 1
0x0C
MON VIDEO
(COMPOSITE)
0x0D
MON VIDEO (Y/C)
0x20
MON DVI
0x00
OFF
0x01
ON
0x00
OFF
0x01
ON
0x00
ON
0x01
OFF
0x00
OFF
0x01
Caption 1
0x02
Caption 2
0x03
Text 1
0x04
Text 2
0x00
Auto
0x01
NTSC
0x02
NTSC 4.43
0x03
PAL
0x04
SECAM
0x05
PAL - M
0x06
PAL - N
0x07
PAL 60
0x00
NTSC/PAL/SECAM/NTSC443
0x01
NTSC/PAL-M/PAL-N
0x00
OFF
0x01
ON
0x00
OFF Timer
0x01
ON Timer
0x02
ON/OFF Timer
0x03
OFF
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
Yes
Yes
Enable
Enable
Enable
Yes
Yes
Disable
Note
Note
Yes
Yes
Disable
Disable
Enable
Yes
Yes
Disable
Disable
Enable
Yes
Yes
Disable
Disable
Enable
Yes
Yes
Disable
Disable
Note
Yes
Yes
Disable
Disable
Note
Yes
Yes
Disable
Disable
Note
Yes
Yes
Note
Note
Note
Yes
Yes
Note
Note
Note
1-3
(Code table (1-a))
[a] Function
0x0A
0x0B
0x0C
0x0D
0x0E
0x0F
Timer Repeat
Picture Inversion
Picture Orbit
Orbit Range
Orbit Cycle
Language
[b] Range/Switch code
0x00
OFF
0x01
ON
0x00
OFF
0x01
Auto
0x02
ON
0x00
OFF
0x01
ON
0x00
Small
0x01
Middle
0x02
Large
0x00
10 sec.
0x01
30 sec.
0x02
1 min.
0x03
5 min.
0x00
Japanese
0x01
English
0x02
Deutsch
0x03
Francais
0x04
Espanol
0x05
Italiano
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
Yes
Yes
Enable
Enable
Enable
Yes
Yes
Note
Note
Note
Yes
Yes
Enable
Enable
Enable
Yes
Yes
Enable
Enable
Enable
Yes
Yes
Enable
Enable
Enable
Yes
Yes
Enable
Enable
Enable
0x10
Index Number
0x01 - 0xFF
Yes
Yes
Enable
Enable
Enable
0x11
Remote Mode
0x00
ON
Yes
Yes
Enable
Enable
Enable
0x01
ON
0x02
OFF
0x00
OFF
Yes
Yes
Enable
Enable
Enable
0x01
ON
0x00
Standard
Yes
Yes
Enable
Enable
Enable
0x01
Reduce
0x00
ON
Yes
Yes
Disable
Disable
Enable
0x01
OFF
0x00
1080i
Yes
Yes
Disable
Disable
Enable
0x01
1035i
0x00
DTV
Yes
Yes
Disable
Disable
Enable
0x01
PC
0x00
H/Comp
Yes
Yes
Disable
Disable
Enable
0x01
Video
0x00
On/Off
Yes
Yes
Disable
Disable
Enable
0x01
Return
0x12
0x13
0x14
0x16
Remote Only
Energy Saving
Speaker Out
HD Mode
0x17
RGB Mode
0x18
Sync Mode
0x19
1-4
Menu Key
PFM-42X1/42X1N
(Code table (1-a))
[a] Function
0x1A
0x1B
Sleep
Clock Display
0x30
PAP
0x31
Active Picture
[b] Range/Switch code
0x00
OFF
0x01
30 min
0x02
60 min
0x03
90 min
0x04
120 min
0x00
OFF
0x01
ON
0x00
ON
0x01
OFF
0x00
Left
0x01
Right
0x02
Swap
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
Yes
Yes
Note
Note
Note
Yes
Yes
Enable
Enable
Enable
Yes
Yes
Disable
Disable
Enable
Yes
Yes
Disable
Disable
Enable
0x32
Picture Size
0x00 - 0x0E
Yes
Yes
Disable
Disable
Enable
0x41
Back Ground
0x00
Gray
Yes
Yes
Disable
Disable
Enable
0x01
Dark Gray
0x02
Black
PFM-42X1/42X1N
1-5
(b) Color matrix
Syntax
Header
Category
Control
0x8C
0x00
Enquiry
Execute Judge
Answer
Function
Data2
Data3
0x02
Code Table
(1-c)
Code Table
(1-b) - [b]
0x83
Code Table
(1-c)
0xFF
0x89
0xFF
0xFF
Code Table (1-b) [a]
...
Header
Answer
0x70
0x00
Completed
0x70
0x03
Command Canceled
Enquiry
0x70
0x00
Execute Judge
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
Control
Return Data Size
Data1
0x02
Return Data1 Return Data2
Code Table
(1-c)
Completed
Code Table
(1-b) - [b]
Code table (1-b)
[a] Function
0x1D
Color Matrix
[b] Range/Switch code
0x00
YCbCr
0x01
YPbPr
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
Yes
Yes
Disable
Enable
Enable
Code Table (1-c)
Format Select
0x00
480p
0x01
1080i
0x02
720p
1-6
PFM-42X1/42X1N
(c) Time control
Syntax
Header
Category
Control
0x8C
0x00
Enquiry
Execute Judge
Answer
Function
Data2
Data3
0x02
Hour :
0x00 - 0x17
Minute :
0x00 - 0x3B
0x83
Code Table
(1-c)
0xFF
0x89
0xFF
0xFF
Code Table (1-d) [a]
...
Header
Answer
0x70
0x00
Completed
0x70
0x01
Limit Over
0x70
0x02
Limit Under
0x70
0x03
Command Canceled
Enquiry
0x70
0x00
Execute Judge
0x70
0x04
Control
Return Data Size
Data1
0x02
Return Data1 Return Data2
Hour :
0x00 - 0x17
Completed
Minute :
0x00 - 0x3B
Command All Enable
Code table (1-d)
[a] Function
[b] Range/Switch code
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
ON/OFF Timer
0x1E
Power ON Time
Yes
Yes
Enable
Enable
Enable
0x1F
Power OFF Time
Yes
Yes
Enable
Enable
Enable
Picture Inversion
0x20
Invert Start Time
Yes
Yes
Enable
Enable
Enable
0x21
Invert End Time
Yes
Yes
Enable
Enable
Enable
Yes
Yes
Enable
Enable
Enable
Time Set
0x22
Time Set
PFM-42X1/42X1N
1-7
2. Picture/Sound
(a) Picture/sound
Syntax
Header
Category
Control
0x8C
0x10
Enquiry
Execute Judge
Code Table (2-a) - [a]
Data1
Data2
0x01
Code Table
(2-a) - [b]
0x83
0xFF
0xFF
0x89
0xFF
0xFF
Answer
Control
Function
Return Data Size
...
Header
Answer
Return Data1 Return Data2
0x70
0x00
Completed
0x70
0x01
Limit Over
0x70
0x02
Limit Under
0x70
0x03
Enquiry
0x70
0x00
0x01
Code Table
(2-a) - [b]
Command Canceled
Execute Judge
0x70
0x00
Variable (Data Size)
Code Table
(2-a) - [b]
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
Completed
...
...
Completed with Enable
Codes
Code table (2-a)
[a] Function
[b] Range/Switch code
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
0x00
Contrast
0x00 - 0x64
Yes
Yes
Disable
Disable
Enable
0x01
Brightness
0x00 - 0x64
Yes
Yes
Disable
Disable
Enable
0x02
Chroma
0x00 - 0xC8
Yes
Yes
Disable
Disable
Enable
0x03
Phase
0x00 - 0x64
Yes
Yes
Disable
Disable
Enable
0x04
Color Temp
0x00
High
Yes
Yes
Disable
Disable
Enable
0x01
Mid
0x02
Low
0x03
User1
0x04
User2
0x05
User3
0x09
Sharpness
0x00 - 0x14
Yes
Yes
Disable
Disable
Enable
0x0A
NR
0x00
Off
Yes
Yes
Disable
Disable
Enable
0x01
Low
0x02
Mid
0x03
High
0x00
On
Yes
Yes
Disable
Disable
Enable
0x01
Off
0x0C
1-8
Dynamic Picture
PFM-42X1/42X1N
(Code table (2-a))
[a] Function
0x0E
0x10
Gamma Correct
Picture Mode
[b] Range/Switch code
0x00
High
0x01
Mid
0x02
Low
0x00
Standard
0x01
Vivid
0x02
User1
0x03
User2
0x04
User3
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
Yes
Yes
Disable
Disable
Enable
Yes
Yes
Disable
Disable
Enable
0x30
Volume
0x00 - 0x64
Yes
Yes
Disable
Disable
Enable
0x31
Treble
0x00 - 0x64
Yes
Yes
Disable
Disable
Enable
0x32
Bass
0x00 - 0x64
Yes
Yes
Disable
Disable
Enable
0x33
Balance
0x00 - 0x64
Yes
Yes
Disable
Disable
Enable
0x34
Surround
0x00
Off
Yes
Yes
Disable
Disable
Enable
0x01
Hall
0x02
Simulate
PFM-42X1/42X1N
1-9
(b) Color temperature
Syntax
Header
Category
Control
0x8C
0x10
Enquiry
Execute Judge
Data2
Data3
0x02
Code Table
(2-c)
Code Table
(2-b) - [b]
0x83
Code Table
(2-c)
0xFF
0x89
0xFF
0xFF
Answer
Function
Code Table (2-b) [a]
Header
Answer
0x70
0x00
Completed
0x70
0x03
Command Canceled
Enquiry
0x70
0x00
Execute Judge
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
Control
Return Data Size
Data1
0x02
Return Data1 Return Data2
Code Table
(2-c)
Code Table
(2-b) - [b]
Completed
Code table (2-b)
[a] Function
[b] Range/Switch code
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
0x05
Red Gain
0x00 - 0x1E
Yes
Yes
Disable
Disable
Disable
0x06
Green Gain
0x00 - 0x1E
Yes
Yes
Disable
Disable
Disable
0x07
Blue Gain
0x00 - 0x1E
Yes
Yes
Disable
Disable
Disable
Code Table (2-c)
Format Select
0x03
User1
0x04
User2
0x05
User3
1-10
PFM-42X1/42X1N
(c) Color temperature name
Syntax
Header
Category
Control
0x8C
0x10
Enquiry
Execute Judge
Answer
Function
0x08
Data1
Data2
0x07
Code Table (2-c)
Temp Select
0x83
Code Table (2-c)
Temp Select
0xFF
0x89
0xFF
0xFF
0x00 - 0xFF
Header
Answer
0x70
0x00
Completed
0x70
0x01
Limit Over
0x70
0x02
Limit Under
0x70
0x03
Command Canceled
Enquiry
0x70
0x00
Execute Judge
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
Control
PFM-42X1/42X1N
Return Data Size
Data3 to Data8
0x06
Return Data1 to Data6
Character Data (0x00 - 0xFF)
Completed
1-11
3. Size/Shift
(a) 16 bit register
Syntax
Header
Category
Control
0x8C
0x20
Enquiry
Execute Judge
Answer
Function
Data2
Data3
0x02
Code Table
(3-a) - [b]
Code Table
(3-a) - [b]
0x83
0xFF
0xFF
0x89
0xFF
0xFF
Code Table (3-a) - [a]
Header
Answer
0x70
0x00
Completed
0x70
0x01
Limit Over
0x70
0x02
Limit Under
0x70
0x03
Command Canceled
Enquiry
0x70
0x00
Execute Judge
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
Control
Return Data Size
Data1
0x02
Return Data1 Return Data2
Code Table
(3-a) - [b]
Code Table
(3-a) - [b]
Completed
Code table (3-a)
[a] Function
0x0A
H Total Pixel
[b] Range/Switch code
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
Yes
Yes
Disable
Disable
Disable
0x0190 - 0x09C4 (default +/_50)
(b) 8 bit register
Syntax
Header
Category
Control
0x8C
0x20
Enquiry
Execute Judge
Answer
Function
Code Table (3-b) - [a]
Data1
Data2
0x01
Code Table
(3-b) - [b]
0x83
0xFF
0xFF
0x89
0xFF
0xFF
Answer
0x70
0x00
Completed
0x70
0x01
Limit Over
0x70
0x02
Limit Under
0x70
0x03
Command Canceled
Enquiry
0x70
0x00
0x01
Code Table
(3-b) - [b]
Execute Judge
0x70
0x00
Variable (Data Size)
Code Table
(3-b) - [b]
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
Control
1-12
Return Data Size
...
Header
Return Data1 Return Data2
Completed
...
...
Command Disable
PFM-42X1/42X1N
Code table (3-b)
[a] Function
[b] Range/Switch code
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
0x00
H Size
0x00 - 0x3C
Yes
Yes
Disable
Disable
Enable
0x01
H Shift
0x00 - 0x3C
Yes
Yes
Disable
Disable
Enable
0x02
V Size
0x00 - 0x3C
Yes
Yes
Disable
Disable
Enable
0x03
V Shift
0x00 - 0x3C
Yes
Yes
Disable
Disable
Enable
0x04
Zoom Mode
0x00
Expd. 4 : 3
Yes
Yes
Disable
Disable
Note
0x01
Letter Box
0x02
16 : 9
0x03
Sub Title
0x04
4:3
0x00
Standard
Yes
Yes
Disable
Disable
Note
0x01
x2
0x02
x3
0x03
x4
Execute
Yes
No
Disable
Disable
Enable
0x05
Zoom Size
0x06
Auto Pixel Adjust
0xFF
0x07
Dot Phase
0x00 - 0x1F
Yes
Yes
Disable
Disable
Enable
0x08
Auto Wide
0x00
Off
Yes
Yes
Disable
Disable
Note
0x01
On
0x00
4:3
Yes
Yes
Disable
Disable
Enable
0x01
Expd. 4 : 3
0x09
4 : 3 Mode
PFM-42X1/42X1N
1-13
4. Status Enquiry
(a) Model name enquiry
Syntax
Header
Category
Enquiry
0x83
0x30
Execute Judge
0x89
Answer
Header
Answer
Enquiry
0x70
0x00
Execute Judge
0x70
0x04
Function
Data1
0x00
Return Data Size
0x01
Data2
0xFF
0xFF
0xFF
0xFF
Return Data1
Code Table
(4-a)
Completed
Command All Enable
Code Table (4-a)
Format Select
0x20
PFM-42V1
(b) Serial number enquiry
Syntax
Header
Category
Enquiry
0x83
0x30
Execute Judge
0x89
Answer
Function
0x01
Data1
Data2
0xFF
0xFF
0xFF
0xFF
Header
Answer Return Data Size Return Data1 Return Data2 Return Data3 Return Data4
Enquiry
0x70
0x00
Execute Judge
0x70
0x04
0x04
Upper 8bit
Data
Middle
Upper Data
Middle
Lower Data
Lower 8bit
Data
Completed
Command
All Enable
Return Data1 - Data4 : 0x00000000 - 0x0098967F (0000000 - 9999999)
(c) Operation time enquiry
Syntax
Header
Category
Enquiry
0x83
0x30
Execute Judge
0x89
Answer
Function
0x02
Data1
Data2
0xFF
0xFF
0xFF
0xFF
Header
Answer Return Data Size Return Data1 Return Data2 Return Data3 Return Data4
Enquiry
0x70
0x00
Execute Judge
0x70
0x04
0x04
Upper 8bit
Data
Middle
Upper Data
Middle
Lower Data
Lower 8bit
Data
Completed
Command
All Enable
Return Data1 - Data4 : 0x00000000 - 0xD693A3FF (0 sec. - 3,599,999,999 sec.)
1-14
PFM-42X1/42X1N
(d) Software version enquiry
Syntax
Header
Category
Enquiry
0x83
0x30
Execute Judge
0x89
Answer
Function
0x03
Header
Answer
Enquiry
0x70
0x00
Execute Judge
0x70
0x04
Return Data Size
0x02
Data1
Data2
0xFF
0xFF
0xFF
0xFF
Return Data1 Return Data2
Upper 8bit
Data
Lower 8bit
Data
Completed
Command All Enable
Return Data1 - Data2 : 0x0000 - 0xFFFF
(e) H/V frequency enquiry
Syntax
Header
Category
Enquiry
0x83
0x30
Execute Judge
0x89
Answer
Enquiry
Execute Judge
Function
Code Table (4-b)
Return Data Size
Data1
Data2
0xFF
0xFF
0xFF
0xFF
Header
Answer
0x70
0x00
0x70
0x03
Command Canceled
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
0x02
Return Data1 - Data2 : 0x0000 - 0xFFFF
Return Data1 Return Data2
Upper 7bit
Data
Lower 7bit
Data
Completed
H Frequency = Return Data x 10 [Hz]
V Frequency = Return Data / 100 [Hz]
Code table (4-b)
Function
Execute Judge ACK
Standby
Setup
Sequence
Power
On
0x04
H Frequency
Disable
Disable
Enable
0x05
V Frequency
Disable
Disable
Enable
(f) Sync polarity enquiry
Syntax
Header
Category
Enquiry
0x83
0x30
Execute Judge
0x89
Answer
Enquiry
Execute Judge
PFM-42X1/42X1N
Function
0x06
Return Data Size
Data1
Data2
0xFF
0xFF
0xFF
0xFF
Header
Answer
0x70
0x00
0x70
0x03
Command Canceled
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
0x01
Return Data1
Code Table
(4-c)
Completed
1-15
Code table (4-c)
Function
Execute Judge ACK
Standby
Setup
Sequence
Power
On
0x00
H : Nega / V : Nega
Disable
Disable
Enable
0x01
H : Nega / V : Posi
Disable
Disable
Enable
0x02
H : Posi / V : Nega
Disable
Disable
Enable
0x03
H : Posi / V : Posi
Disable
Disable
Enable
0x04
SonG
Disable
Disable
Enable
0x05
No H/V Sync
Disable
Disable
Enable
1-16
PFM-42X1/42X1N
5. User Memory
(a) Load/save
Syntax
Header
Category
Control
0x8C
0x40
Execute Judge
0x89
Function
Code Table (5-a) - [a]
Data1
Data2
0x01
Code Table
(5-b)
0xFF
0xFF
(b) Memory name
Syntax
Header
Category
Control
0x8C
0x40
Enquiry
Execute Judge
Answer
Control
Function
0x02
Data1
Data2
0x07
Code Table (5-b)
0x83
Code Table (5-b)
0xFF
0x89
0xFF
0xFF
Return Data Size
...
Header
Answer
Return Data1 Return Data2
0x70
0x00
Completed
0x70
0x01
Limit Over
0x70
0x02
Limit Under
0x70
0x03
Enquiry
0x70
0x00
Command Canceled
Execute Judge
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
0x06
Return Data1 to Data6 : Character Data
(0x00 - 0xFF)
Completed
Code table (5-a)
[a] Function
[b] Range/Switch code
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
0x00
Memory Load
Execute
Yes
No
Disable
Disable
Enable
0x01
Memory Save
Execute
Yes
No
Disable
Disable
Enable
0x02
Memory Name
Execute
Yes
No
Enable
Enable
Enable
Code table (5-b)
Memory Number
0x00
User Memory 1
0x0A
User Memory 11
0x01
User Memory 2
0x0B
User Memory 12
0x02
User Memory 3
0x0C
User Memory 13
0x03
User Memory 4
0x0D
User Memory 14
0x04
User Memory 5
0x0E
User Memory 15
0x05
User Memory 6
0x0F
User Memory 16
0x06
User Memory 7
0x10
User Memory 17
0x07
User Memory 8
0x11
User Memory 18
0x08
User Memory 9
0x12
User Memory 19
0x09
User Memory 10
0x13
User Memory 20
PFM-42X1/42X1N
1-17
6. User Reset
Syntax
Header
Category
Control
0x8C
0x50
Execute Judge
0x89
Answer
Control
Execute Judge
Function
Code Table (6)
Header
Answer
0x70
0x00
Completed
0x70
0x03
Command Canceled
0x70
0x03
Command Disable
0x70
0x04
Command All Enable
Data1
Data2
0x01
0xFF
0xFF
0xFF
Code table (6)
Function
Range/Switch code
Command
Execute Judge ACK
Control
Enquiry
Standby
Setup
Sequence
Power
On
0x00
Picture Reset
Yes
No
Disable
Disable
Enable
0x01
Audio Reset
Yes
No
Disable
Disable
Enable
0x02
Size Reset
Yes
No
Disable
Disable
Enable
0x03
PLL Reset
Yes
No
Disable
Disable
Enable
1-18
PFM-42X1/42X1N
7. Answer
(a) Normal message
Answer
Header
0x70
Normal answer header
Category
0xXX
Code table (7-a) : Normal code
Code table (7-a)
Normal code
0x00
Completed
Normal response.
0x01
Limit over
The packet was received normally, but the data value was over the upper
limit.
Forcedly the monitor adjusted the data to maximum value.
0x02
Limit under
The packet was received normally, but the data value was under the lower
limit.
Forcedly the monitor adjusted the data to minimum value.
0x03
Command cancelled
The packet was received normally, but the command was cancelled because
the function was not in adjustable mode, such as a function displayed as “—
—” in user menu.
0x04
Command all enable
The packet was received normally.
The command function is all enable.
0x05
Fail
The packet was received normally, but the command was cancelled .
Please retry.
(b) Error message
Answer
Header
0xE0
Error answer header
Category
0xXX
Code table (7-b) : Error code
Code table (7-b)
Normal code
0x00
No function error
Packet header,category or function codes do not exist in this protocol.
0x02
Data number error
The data value in “Data num” area of received packet was different from the
function’s own data number.
0x06
Mode error
The monitor is already in the service mode via remote commander
operation.
(The service mode through IR remote has priority over the serial remote
command. )
0x07
Time out
Packet communication are interrupted by some error, and did not return to
normal communication within 2 seconds.
PFM-42X1/42X1N
1-19
The material contained in this manual consists of
information that is the property of Sony Corporation.
Sony Corporation expressly prohibits the duplication of
any portion of this manual or the use thereof for any
purpose other than the operation or maintenance of the
equipment described in this manual without the express
written permission of Sony Corporation.
Le matériel contenu dans ce manuel consiste en
informations qui sont la propriété de Sony Corporation.
Sony Corporation interdit formellement la copie de
quelque partie que ce soit de ce manuel ou son emploi
pour tout autre but que des opérations ou entretiens de
l’équipement à moins d’une permission écrite de Sony
Corporation.
Das in dieser Anleitung enthaltene Material besteht aus
Informationen, die Eigentum der Sony Corporation sind.
Die Sony Corporation untersagt ausdrücklich die
Vervielfältigung jeglicher Teile dieser Anleitung oder den
Gebrauch derselben für irgendeinen anderen Zweck als
die Bedienung oder Wartung der in dieser Anleitung
beschriebenen
Ausrüstung
ohne
ausdrückliche
schriftliche Erlaubnis der Sony Corporation.
PFM-42X1/42X1N
PFM-42X1 (SY)
PFM-42X1N (SY) E
Sony Corporation
Printed in Japan
2004. 8 16
©2004
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement