WIRED VERSION AN8 Series Programmable, full 0-360 ° detection Contact less angular position sensor capable of continuous rotation Features and Benefits Angular position sensor with high tolerance for misalignment Provides non-contact angular position sensing to full 360° rotation No mechanical interface means no parts to wear out Sealed design exceeds IEC529 IP68 standard for immersion 5VDC ratiometric device. Performs with AS500106 standard magnetic carrier Provided with EMI/ESD protection to SAE J1113 standards Maximum operating temperature of 150ºC Description Sensor is operated by rotating a magnetic actuator close to its sensitive face. Output voltage varies according angular position of the magnet. Optimal performance is achieved with Cherry’s AS500106 magnetic actuator. Applications Replacement for smart bearings PRNDL switch for harsh environments Steer wheel position for drive by wire systems Throttle position sensor Pedal position sensor Non contacting Potentiometer Dimensions mm Custom Options (Contact factory for minimums and availability) Linear output over specific angular rotation ranges available on request Sensor can be programmed for use with custom magnets Custom programming option for rising or falling output slope with selectable offset, gain, clamp voltage PWM output option available for custom applications WIRED VERSION AN8 Series Mechanical Specifications Mechanical Travel Dither Termination Maximum Air Gap Maximum Center-to-Center Offset 0 to 360 degrees (continuous) No mechanical contact 300mm Radox 18 AWG 5mm 1mm (magnet to sensor) Electrical Specifications Sensing Range Input Voltage Output Voltage Output Accuracy (with supplied magnet) (65°- 360° rotation) Output Smoothness (with supplied magnet) (65°- 360° rotation) Output Linearity (with supplied magnet) (65°- 360° rotation) Absolute Max Supply Voltage Absolute Max Reverse Voltage Maximum Output Current Range 0 to 360 degrees of rotation 5.0 VDC ± 10% 0.5 to 4.5 VDC (ratiometric) ± 2.5% Full Scale ± 0.75% Full Scale for any 2% interval ± 2.0% Full Scale 16 VDC -14.5 VDC 8mA Output type Electrostatic Discharge Immunity to Radiated Electronic Magnetic Fields Conducted Transient Emissions Radiated Emissions Conducted Immunity Conduction and Coupling Operating Temperature Analog SAE J1113-13; Consult factory for details SAE J1113-4; 1 MHz to 400 MHz SAE J1113-42; ± 25V SAE J1113-41; Class 3 SAE J1113-2; 30Hz to 250kHz SAE J1113-12; Consult factory for details -40 to 150°C Sensor Sensing Range AN820031 AN820032 180° 360° Contact Call, fax or visit our website For more information. ZF Electronics Corporation 11200 88th Avenue Pleasant Prairie, WI 53158 Phone: Web: 262.942.6500 www.cherrycorp.com E-Mail: Fax: [email protected] 262.942.6566 © 2010 ZF Electronics Corporation Specifications subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project