Full Line Catalog Professionals Trust Pomona Performance 2006 - 2007

Full Line Catalog Professionals Trust Pomona Performance 2006 - 2007
Professionals Trust
Pomona Performance
Test and Measurement
Calibration
RF
Audio / Video
Automotive
Telecom
2006 - 2007
Full Line Catalog
Table of Contents
For over half a
3
New Products
8
Customized Products
9
Coaxial Cable Assemblies and Breakouts
18
Coaxial Connectors, Adapters and Kits
30
Banana Plugs and Jacks
42
Patch Cords and Test Lead
52
Boxes and Enclosures
58
DMM Accessories and Kits
72
Grabbers and Test Clips
75
SMD/Micro Format Test
79
Oscilloscope Probes and Accessories
83
Audio/Video
86
Automotive
87
IC Test Clips and Adapters
91
Static Control Products
93
Telecom Products
99
Temperature Probes
century the name
Pomona Electronics
has been
synonymous with
reliabillity and
outstanding value.
We are proud to
have built our
reputation for the
delivery of quality
products by using
only the finest
materials available
and designing to
match real world
applications... where
you live – everyday.
Pomona Electronics
101
Index
107
Technical Support
is proud to be there,
at your side.
2
New Products
SMD/ Micro Format Test
3
SMD High Density Circuit Test Kit Model# 72935
• SMD test kit includes the critical clips needed for probing high density circuits.
• Plus, you get the leads and adapters needed to get from micro-scale test up to the 4mm plugs
needed for your DMM.
• Kit includes 2 DMM leads with 4mm plugs, 2 test probes with spring-loaded tips, 6 micro SMD
grabbers, 6 adapter leads 0.8mm female to 0.4mm jack, 2 mini SMD grabbers with 4mm connectors,
2 holding rods.
Shown on page 75.
Micro SMD Grabber
Test Clips Model# 72902-0
Mini SMD Grabber
Test Clips Model# 72906-2
Clip Leads for SMD
Grabbers Model# 72905-0
• Easily attach to SMD chips
with pitches down to 0.008in
(0.20 mm).
• Designed for easy attachment
to SMD chips with pitches
down to 0.032in (0.80 mm).
• Thin yet durable design permits
attachment with close spacing
in tight spaces.
• Insulated shaft can be bent
up to 36 degrees for versatile
attachment in awkward
locations or close proximity
to other clips.
• Clip lead attaches from either
Micro SMD Grabber or Mini
SMD Grabber to standard
test leads.
• Insulated tip minimizes
shorting on adjacent pins.
Gold plating for low resistance
connections.
Shown on page 76.
• Thin (3mm) profile allows close
placement to adjacent clips.
Shown on page 76.
• (See many more new products
in the new SMD/Micro Format
Test Section).
Shown on page 76.
New Products
4
RF Connector Kits
Multi-RF Direct Adapter Kit
Model# 72934
• A consolidated kit including the most
frequently used 50Ω RF adapters in a
rugged pistol-grip case.
• Allows for direct adaptation without
intermediate couplers.
• All parts are precision machined brass,
not die-cast, with tarnish resistant
nickel plating.
See more new RF kits on page 18.
Pomona’s quality
connectors are the
one answer you
need when a
reliable signal is
IEC Insulated Cable Assemblies, Breakouts and Adapters
demanded.
IEC Insulated BNC Male 50Ω Cable Model# 72926-C-40
• IEC Insulated BNCs allow safe attachment in 500V CAT 1 applications.
• Rugged design for dependable service.
Shown on page 10.
Pomona’s test
accessories are
made from
the finest materials
available – designed
and built for long
service life and
Insulated BNC (m) to Stackable /
Retractable 4mm Plugs Model# 72908 IEC
• Safe and convenient adaptation from BNC format
to banana plug format.
• Stackable/retractable 4 mm plugs permit multiple
attachments to test points.
Shown on page 16.
exceptional reliability.
Insulated BNC (f) to 2 Male Banana 4mm
Plugs Model# 72911 IEC
• Safe connections from BNC format to banana plug format.
• Rugged, insulated design for dependable safety.
Shown on page 20.
New Products
2mm Test
5
Multi-stacking 2mm
Safety Sheathed
Patch Cords
SMD Test Probe
with Sharp, SpringMounted Tip
Model# 72920-39-2
Model# 72923-2
• Thin profile, highly
flexible leads allow fine
control and minimal
strain on circuit board
measurements.
• Provides ultra-fine
control for probing high
density SMD circuits.
• Multi-stacking safety
sheathed design for easy
multiple connections to
test points.
Shown on page 77.
• Very fine 0.03in (0.7mm)
diameter stainless steel
tip is spring-mounted
for controlled pressure.
2mm Safety
Sheathed Jacks
Model# 72921-0
• 2mm sizing for convenient connection in tight
spaces.
• Safety sheathed jack
with 1.9mm wire wrap
connecting pin for quick
attachment.
Shown on page 75.
• Removable, clear IC
insulator cap prevents
shorting of adjacent
IC pins.
Shown on page 77.
AC Voltage Detector and Flashlight
LumaVolt Model# 7290
• AC Voltage Detector – Detects
voltages from 40 Vac to
300 Vac from 1 to 15 inches away
from the source.
• Flashlight feature includes ultrabright white LED with 100,000
hour bulb.
Shown on page 65.
4mm Safety
Banana Jack to
2mm Banana
Plug Adapter
Model# 72914-02
• For easy conversion
from 4mm test leads
to more compact 2mm
test accessories.
• Accepts 4mm safetysheathed banana plugs.
Shown on page 78.
New Products
6
New Panel Mount Jacks
IEC 1010 4mm Banana Jacks for Sheathed Plugs
Model# 72912-2
• Designed for fast panel construction.
• Gold-plated stud and nuts for high conductivity.
• Rating: 1000V Cat III, 36A Mx.
Our test accessories
compliment the
best test instruments
and continue to
be the choice
2mm Safety Sheathed Jacks Model# 72922-2
• 2mm jack increases possible connections in a limited space.
• Broad solder tab for easy soldering.
• Rating: 600V Cat II, 10A.
Shown on page 78.
of professionals
worldwide.
Classics – Back by Popular Demand
SMD Microtip Test Probe Set Model# 6235
• Probe microtip specially designed to probe SMD contacts.
• Features a stainless steel needle tip that is curved to aid in
probing hard to reach areas.
Shown on page 68.
Need a Quality Connection?
For Distributor Locations:
United States and International
www.pomonaelectronics.com
BNC Shielded Test Probe Kit Model# 5292-48
• Shield extends to within 1.5in (3.8cm) of probe tip.
Europe
www.pomona.cc
• Alligator or Minigrabber test clip can be quickly
threaded onto ground lead.
• Stainless steel dog leg tip excellent for SMD probing.
Technical Support:
Shown on page 68.
U.S.: 1-800-241-2060
Europe: +31(0) 40 2675 150
Rest of World: 1-425-446-5500
Antistatic Ground Cord Model# 5534
• These patch cords feature a molded-in 1 MΩ resistor
at the snap end for added Safety.
• Extended length is 72in (183cm).
Shown on page 92.
New Products
RF Coax Plugs, Jacks and Adapters
7
Type N (m) 75Ω Plug, Crimp RG59
Model# 6767
• 3 GHz performance with VSWR of 1.1 maximum
from 0 to 1 GHz and 1.35 from 1 to 3 GHz.
• 75Ω impedance for communications applications.
• Male center pin contacts are gold plated brass.
Shown on page 25.
TNC (f) 50Ω Bulkhead Receptacle,
Crimp RG55, 142, 223, 400 Model# 7063
• 11 GHz performance with VSWR of
1.3 maximum from 0 to 11 GHz.
• Precision machined brass, not die-cast,
with tarnish resistant nickel plating.
• Female center contacts are gold plated
heat treated beryllium copper.
Shown on page 24.
BNC (m) 50Ω
Compression Style
RG-223 Model# 7207
TNC (m) 50Ω Plug RG58,
141, 55A, 142, 223, 499
• 4 GHz performance with
VSWR of 1.3 maximum from
0 to 4 GHz.
• 11GHz performance with
VSWR of 1.3 maximum from
0 to 11GHz.
• Precision machined brass, not
die-cast, with tarnish resistant
nickel plating.
• Precision machined brass, not
die-cast, with tarnish resistant
nickel plating.
• Male center pin contacts are
gold plated brass.
• Male center pin contacts are
gold plated brass.
Shown on page 22.
Shown on page 24.
Type N (f) 50Ω Panel
Mount Model# 7074
Model# 7048
• 11 GHz performance with
VSWR of 1.3 maximum from
0 to 11 GHz.
• Precision machined brass,
not die-cast, with white
bronze plating.
• Female center contacts are gold
plated (30 micro-inches) brass.
Shown on page 26.
Customized Products
Pomona responds to a wide range of special or custom requirements by
providing accessories tailored to your needs. Whether we simply modify
an existing catalog product or create a unique combination of products,
we use only the finest materials to deliver top quality products.
8
Think of the possibilities!
You can now define your
own custom product or kit
made of many combination
of cables, wires, connectors,
or probes in this catalog.
Can’t find the length or color
you need? Pomona makes
it easy. Want a unique
combination of connectors
and cables you just can’t find
anywhere? Just ask Pomona!
Combinations of coaxial connector/adapter
assemblies can include strain-relief
sheathing, marking and lengths.
Call Pomona at 1-800-490-2361 or
Fax your requirements to 425-446-5844.
www.pomonaelectronics.com
Coaxial Cable Assemblies
and Breakouts
Pomona is the professional’s choice, whether in the lab, plant or in the
field. Using high-quality materials such as beryllium copper, brass and
nickel plating ensures the precision you rely on. With a huge selection of
cables and breakouts offering almost every connector and clip combination,
Pomona provides you the solution for any application.
9
How to Order
Cable Assembly
Holders
Model#
1508
4408
2708
Example: A 48in (1.2m) coaxial cable assembly with matching BNC (m) ends,
stress relief boots on RG58 C/U, 50Ω cable.
Color
“A”
Max Cable Dia.
Number
of Slots
Orange
Black
Blue
0.210in (5.33mm)
0.320in (8.13mm)
0.450in (11.43mm)
14
10
9
Cable Length
11.00in (279.4mm)
2.71in
(68.83mm)
Typical Pomona Part Number:
3.50in
(188.9mm)
2249-C-48
Model#
Cable Type
Length
2249-C-12
2249-C-24
2249-C-36
2249-C-48
2249-C-60
Cable Length in Inches
(Measured Inside Connectors)
0.53in
(13.46mm)
12.0in (0.3m)
24.0in (0.6m)
36.0in (0.9m)
48.0in (1.2m)
60.0in (1.5m)
A
Technical Specifications for Wire and Cable
Cable
Designation
A
C
E
J
K
T
X
Y
BB
SS
V
Triaxial
Impedance
Ω
Capacitance
per 1ft/
0.304m
Insulation/
Dieletric
AWG
Stranding
Strands
X AWG
twisted pair,
2 conductor
Coax, RG58C/U
Coax, RG59B/U
Microphone,
2 conductor,
shielded
Coax, RG174/U
Coax, RG214/U
NA
27.0 pf
PVC
18
65X36
TC
50
75
90
30.8 pf
22.5 pf
18 / 32 pf*
PE
PE
PE
20
23
22
19X36
Solid
16X34
50
50
30.8 pf
30.8 pf
PE
PE
26
13
Coax, RG142B/U
Coax, RG223/U
Coax, RG316/U
Coax, RG58/U,
low noise
Coax, RG59/U
Coax, RG 58A/U,
double shielded
50
50
50
50
29.0 pf
30.8 pf
29.0 pf
37.0 pf
TFE
PE
TFE
CPE / PE
75
50
20.4 pf
30.8 pf
PE
PE / PE
Type
Wire Jacket
Type Material
Cable
O.D.
Shield
0.25in (6.35mm)
NA
-4 to 221°F (-20 to +105°C)
TC
BCCS
TC
PVCNC 0.195in (4.95mm)
PVCNC 0.242in (6.15mm)
PVC 0.231in (5.84mm)
TCB
BCB
TCB
-40 to 185°F (-40 to +85°C)
-40 to 140°F (-40 to +60°C)
-40 to 176°F (-40 to +80°C)
7X34
7X22
BCCS
SPC
PVC 0.110in (2.79mm)
TCB
PVCNC 0.425in (10.8mm) SCCB / SCCB
18
19
26
22
Solid
Solid
7X37
7X30
SPCCS
FEP
0.195in (4.05mm)
SPC PVCNC 0.212in (5.38mm)
SPCCS
FEP
0.096in (2.44mm)
TC
PVC 0.195in (4.95mm)
23
20
Solid
7X28
BCCS
TC
PVC
PVC
PVC
SPC / SPC
SCB / SCB
SPC
BAF / TCB
0.242in (6.15mm)
BCB
0.240in (6.10mm) TCB / TCB-40
Temperature (w/o connectors)
-40 to 167°F (-40 to +75°C)
-40 to 176°F (-40 to +80°C)
-94 to 392°F (-70 to +200°C)
-40 to 140°F (-40 to +60°C)
-94 to 392°F (-70 to +200°C)
-40 to 176°F (-40 to +80°C)
-40 to 176°F (-40 to +80°C)
to 167°F (-40 to +75°C)
* Capacitance between conductors / Capacitance between conductor and shield
AWG = American Wire Gauge
BAF = Bonded Aluminum Foil Polyester Tape
BCB = Bare Copper Braid
BCCS = Bare Copper Covered Steel
CPE = Conductive Polyethylene
FEP = Fluorinated Ethylene Propylene
OD = Outside Diameter
NA = Not Applicable
PE = Polyethylene
PVC = Polyvinyl Chloride
PVCNC = Polyvinyl Chloride Non
Contaminating
SCB = Silver Coated Braid
SPC = Silver Plated Copper
SCCB = Silver Coated Copper Braid
Ratings: The components in this section have a hands free rating for use in controlled voltage environments.
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
SPCCS = Silver Plated Copper Covered Steel
SSPE = Semi-Solid Polyethylene
TC = Tinned Copper
TCB = Tinned Copper Braid
TFE = Tetrafluoroethylene
www.pomonaelectronics.com
Coaxial Cable Assemblies and Breakouts
10
BNC Male Cable with Molded
Strain Relief
3.37in (85.60mm)
Rating: Hands free testing in controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max., (“Y” Cable 176°F (+80°C).)
BNC: Body: tarnish resistant nickel-plated brass;
Center Contact: gold-plated brass; Dielectric: PTFE.
Strain Relief: PVC molded directly to cable and connectors.
See chart on page 9 for additional wire and cable specifications.
BNC Male Low-Noise Cable
3.37in (85.60mm)
Model#
4964-SS-6
4964-SS-12
4964-SS-24
4964-SS-36
4964-SS-48
4964-SS-60
4964-SS-72
4964-SS-120
4964-SS-240
Length
50Ω Cable O.D. 50Ω Cable O.D. 75Ω Cable O.D. 50Ω Cable O.D. 50Ω Cable O.D.
.195in (4.95mm) .206in (5.23mm) .242in (6.15mm) .100in (2.54mm) .195in 4.95mm)
RG58C/U
RG223
RG59B/U
RG174/U
RG58C/U
.5ft (0.2m)
1ft (0.3m)
2ft (0.6m)
3ft (0.9m)
4ft (1.2m)
5ft (1.5m)
6ft (1.8m)
8ft (2.4m)
10ft (3.0m)
12ft (3.7m)
15ft (4.6m)
20ft (6.1m)
25ft (7.6m)
30ft (9.1m)
50ft (15.2m)
2249-C-6
2249-C-12
2249-C-24
2249-C-36
2249-C-48
2249-C-60
2249-C-72
2249-C-96
2249-C-120
2249-C-144
2249-C-180
2249-C-240
2249-C-300
2249-C-360
2249-C-600
2249-Y-12
2249-Y-24
2249-Y-36
2249-Y-48
2249-Y-60
2249-Y-72
2249-Y-96
2249-Y-120
2249-Y-144
2249-Y-180
2249-Y-240
2249-E-6
2249-E-12
2249-E-24
2249-E-36
2249-E-48
2249-E-60
2249-E-72
2249-E-120
2249-E-144
2249-E-180
2249-E-240
2249-E-300
2249-E-360
2249-E-600
Model 2249-C is Pomona Electronics’
most popular cable. The 50Ω
RG58C/U cable makes it ideal for most
test and measurement applications.
Model 2249-E RG59B/U is a 75Ω
cable, making it the right choice
for use with TV, video and LAN
applications.
Model 2249-Y is a 50Ω, RG223/U
cable with double shield. Use when
additional shielding is required.
Model 2249-K RG174/U offers
superior flexibility in a 50Ω cable.
Length
6in (0.2m)
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
72in (1.8m)
120in (3.0m)
240in (6.1m)
BNC Male True 75Ω
High Flex Cable
3.37in (85.60mm)
2249-K-6
2249-K-12
2249-K-24
2249-K-36
2249-K-48
2249-K-60
2249-K-72
2249-K-96
2249-K-120
5266-C-12
5266-C-48
5266-C-60
2249-K-180
2249-K-240
2249-K-300
Model 5266-C is the same high
quality construction as
Model 2249-C with a connector
on (one end only.)
Model#
6510-V-12-0
6510-V-24-0
6510-V-36-0
6510-V-48-0
6510-V-60-0
6510-V-72-0
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
72in (1.8m)
Model 6510-V uses a true 75Ω connector for superior VSWR and low
return loss up to 3 GHz. The highly
flexible RG59/U type cable has a gas
injected foam polyethylene dielectric
with PVC jacket for low loss and
superior shield coverage. Highly flexible
cable and molded strain relief prevent
excessive bending or kinking. An ideal
product for HDTV and digital video as
well as test and measurement.
Model 4964-SS uses a special lowtriboelectric cable which has noise
attenuating layers surrounding the center conductor. The cable is ideal for low
power, low frequency measurements.
Recommended Frequency Range:
DC to 10KHz
Rating: Hands free testing in controlled
voltage environment: 500 Vrms*.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
Strain Relief: PVC molded directly to
cable and connectors.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
See chart on page 9 for additional
wire and cable specifications.
Strain Relief: PVC molded directly to
cable and connectors.
See chart on page 9 for additional wire
and cable specifications.
Flexible Color-coded
Sleeves for BNC Cables
Model#
6291
Pkg. Qty
20
IEC Insulated BNC Male
50Ω Cable
PVC sleeves which help prevent inadvertent contact with the outer shell of
the BNC and allow for color-coding.
Available in 10 colors. Fit most BNC
male connectors. Perfect for use with
any of the Model 2249- type cables.
Model#
72926-C-40
72926-C-80
Length
40in (100cm)
80in (200cm)
Rating: 500V Cat 1, 150V Cat II, 3A.
Color: Black.
Colors: contains 2 ea. of 10 colors.
www.pomonaelectronics.com
*see rating message at start of section.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Coaxial Cable Assemblies and Breakouts
BNC Male 50Ω Cable: Field
Servicable Connector
1.06in
(26.92mm)
Model#
BNC-C-6
BNC-C-12
BNC-C-18
BNC-C-24
BNC-C-36
BNC-C-48
BNC-C-60
BNC-C-72
BNC-C-96
BNC-C-600
Length
6in
12in
18in
24in
36in
48in
60in
72in
96in
600in
(0.2m)
(0.3m)
(0.5m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
(1.8m)
(2.4m)
(15.2m)
BNC Male to BNC Male Right
Angle 50Ω Cable
1.60in
(40.64mm)
Model#
1383-C-24
1383-C-60
Length
24in (0.6m)
60in (1.5m)
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dieletric: PTFE.
1.06in
(26.92mm)
See chart on page 9 for additional
wire and cable specifications.
Clamp nut and silicone gasket seal
out moisture. Gold-plated center
contact and Teflon® insulation
assure premium performance.
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
BNC Male 50Ω Cable
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass contact soldered to
cable; Dieletric: PTFE.
See chart on page 9 for additional
wire and cable specifications.
BNC Male Right Angle
Connector Cable with
Molded Strain Relief
Model#
4276-C-12
4276-C-24
4276-C-36
1.15in
(29.21mm)
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
Model#
5697-6
5697-12
5697-24
5697-36
5697-48
5697-60
5697-72
5697-120
5697-180
5697-240
Length
6in
12in
24in
36in
48in
60in
72in
120in
180in
240in
(0.2m)
(0.3m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
(1.8m)
(3.0m)
(4.6m)
(6.1m)
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
3.98in (101.09mm)
Cable Type: 50Ω, RG58 type 0.19in
(4.95mm) O.D.
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: gold1.09in
(27.68mm) plated brass; Dieletric: PTFE.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass contact crimped to
cable; Dieletric: PTFE.
Strain Relief: PVC molded directly
to cable and connectors.
See chart on page 9 for additional
wire and cable specifications.
See chart on page 9 for additional
wire and cable specifications.
BNC Male 50Ω Cable with
Insulated Push-on Connector
BNC Male with Molded Strain
Relief (on retractile cable)
3.37in (86mm)
Model#
Extended Length
4487-48
4487-60
4487-72
48in (1.2m)
60in (1.5m)
72in (1.8m)
Rating: Hands free testing in
controlled voltage environment:
270 Vdc/90 Vac cont. duty*, +122˚F
(+50˚C) max.
Cable Type: Shielded microphone
cable.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dieletric: PTFE.
Strain Relief: PVC molded directly
to cable and connectors.
One End Only
Model#
Extended Length
Strain-relief connector on one
end only
5260-72
72in (1.8m)
*see rating message at start of section.
Model#
6253-C-24
6253-C-36
Length
24in (0.6m)
36in (0.9m)
3.67in (93.22mmmm)
Unique locking feature assures
secure retention with the convenience of a push-on connector.
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Outer Shell: blue
thermoplastic; Dieletric: PTFE.
Strain Relief: PVC molded directly
to cable and connectors.
See chart on page 9 for additional
wire and cable specifications.
www.pomonaelectronics.com
11
Coaxial Cable Assemblies and Breakouts
12
BNC Male to BNC Female
with Molded Strain Relief
3.58in (90.93m)
Model#
4524-C-36
4524-C-48
4524-C-60
Length
SMA Male 50Ω Cable
36in (0.9m)
48in (1.2m)
60in (1.5m)
Use to extend BNC Cables.
1.00in
(25.4mm)
3.58in (90.93m)
Length
Strain Relief: PVC molded directly
to cable and connectors.
BNC Male to SMA Male 50Ω
Teflon Insulated Cable
1.06in
(26.92mm)
3.37in (85.60mm)
Model#
1367-C-60
Length
60in (1.5m)
1.00in
(25.40mm)
See chart on page 9 for additional
wire and cable specifications.
3.80in (96.52mm)
4935-BB-24
4935-BB-48
4935-BB-60
Length
24in (0.6m)
48in (1.2m)
60in (1.5m)
SMA: Body /Fittings: passivated
stainless steel; Contact: gold-plated
brass; Dielectric: PTFE.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
See chart on page 9 for additional
wire and cable specifications.
SMA Male to SMA Male
Right Angle – 50Ω
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
BNC/UHF: Body: tarnish resistant
nickel-plated brass; Contact: goldplated brass; Dielectric: PTFE.
RG 316/U
Rating: Hands free testing in
controlled voltage environment:
335 Vrms*.
See chart on page 9 for additional
wire and cable specifications.
BNC Male to UHF Male,
Molded Strain Relief
24in (0.6m)
48in (1.2m)
60in (1.5m)
See chart on page 9 for additional
wire and cable specifications.
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated beryllium copper; Dieletric:
PTFE.
24in (0.6m)
48in (1.2m)
60in (1.5m)
SMA: Body/Fittings: passivated
stainless steel; Contact: gold-plated
brass; Dielectric: PTFE.
See chart on page 9 for additional
wire and cable specifications.
24in (0.6m)
48in (1.2m)
RG 316/U
4846-X-24
4846-X-48
4846-X-60
Strain Relief: PVC molded directly
to cable and connectors.
4277-C-24
4277-C-48
24in (0.6m)
48in (1.2m)
60in (1.5m)
RG 142B/U
BNC: Body: tarnish resistant nickelplated brass, Center Contact: male:
gold-plated brass; female: goldplated beryllium copper; Dieletric:
PTFE.
Model#
Length
4846-K-24
4846-K-48
4846-K-60
4846-BB-24
4846-BB-48
4846-BB-60
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
BNC Female 50Ω Cable with
Molded Strain Relief
RG 174/U
0.90in
(22.86mm)
RG 316/U
4814-BB-24
4814-BB-48
4814-BB-60
Length
24in (0.6m)
48in (1.2m)
60in (1.5m)
SMA: Body/Fittings: passivated
stainless steel; Contact: gold-plated
brass. Dielectric: PTFE.
See chart on page 9 for additional
wire and cable specifications.
1.00in
(25.40mm)
SMA Male to SMA Female
1.00in
(25.40mm)
RG 174/U
4528-K-48
Length
48in (1.2m)
RG 316/U
4528-BB-60
60in (1.5m)
RG 142B/U
4528-X-24
4528-X-48
1.00in
(25.40mm)
24in (0.6m)
48in (1.2m)
SMA: Body/Fittings: passivated
stainless steel; Contact: gold-plated
brass; Dielectric: PTFE.
SMA (F): gold-plated, beryllium
copper center contact; Dielectric:
PTFE.
See chart on page 9 for additional
wire and cable specifications.
www.pomonaelectronics.com
*see rating message at start of section.
Coaxial Cable Assemblies and Breakouts
SMA Male Right Angle
50Ω Cable
0.90in
RG 316/U
4813-BB-24
Length
Type ‘N’ Male 50Ω Cable
24in (0.6m)
1.48in
(37.59mm)
(22.86mm)
SMA: Body/Fittings: passivated
stainless steel; Contact: gold-plated
brass; Dielectric: PTFE.
See chart on page 9 for additional
wire and cable specifications.
Model#
Length
1658-T-18
1658-T-24
1658-T-36
1658-T-48
1658-T-60
18in
24in
36in
48in
60in
(0.5m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
Rating: Hands free testing in
controlled voltage environment:
1,000 Vrms*.
Type 'N': Body: white bronze-plated
brass; Center Contact: gold-plated
brass; Dielectric: PTFE.
See chart on page 9 for additional
wire and cable specifications.
SMA Male to Type ‘N’ Male
50Ω Cable
1.40in
(35.56mm)
Model#
5058-X-12
5058-X-24
5058-X-36
5058-X-48
5058-X-60
Length
12in
24in
36in
48in
60in
(0.3m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
Type ‘N’ Male 50Ω Cable
1.40in
(35.56mm)
SMA: Body/Fittings: passivated
stainless steel; Contact: gold-plated
brass; Dielectric: PTFE.
1.00in
(25.40mm)
BNC Male to Type ‘N’ Male,
50Ω Cable
1.40in
(35.56mm)
1.06in
(26.92mm)
Model#
2256-X-48
2256-C-36
2256-C-60
Length
48in (1.2m)
36in (0.9m)
60in (1.5m)
Type 'N': Body: white bronze-plated
brass; Center Contact: gold-plated
brass; Dielectric: PTFE.
Type 'N': Body: white bronze-plated
brass; Center Contact: gold-plated brass;
Dielectric: PTFE.
See chart on page 9 for additional
wire and cable specifications.
See chart on page 9 for additional wire
and cable specifications.
Model#
1366-C-24
1366-C-36
1366-C-48
Length
24in (0.6m)
36in (0.9m)
48in (1.2m)
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
Triaxial Male to
Three Alligator
Test Clips, Double
Shielded
BNC: Body: tarnish resistant nickelplated brass; Dielectric: PTFE.
Model#
4725
5342
Lugs
Length
Triaxial
Triaxial
2
3
36in (0.9m)
36in (0.9m)
Rating: Hands free testing in
controlled voltage environment:
150 Vrms*.
1.50in
(38.10mm)
Type 'N': Body: white bronze-plated
brass; Center Contact: gold-plated
brass; Dielectric: PTFE.
Cable Type
See chart on page 9 for additional
wire and cable specifications.
Jaw Opening: 0.30in (7.62mm) Max.
Triaxial: Body/Fittings: tarnish
resistant nickel-plated brass;
Intermediate and Center Contacts: goldplated brass; Dielectric: PTFE.
See chart on page 9 for additional wire
and cable specifications.
2.25in
(57.15mm)
6.0in (152.40mm)
2 Lug
*see rating message at start of section.
3 Lug
www.pomonaelectronics.com
13
Coaxial Cable Assemblies and Breakouts
14
Triaxial Male Cables
Model#
1.50in
(38.10mm)
5223-36
5223-60
5054-36
5054-60
Cable
Type
#Lugs
Triaxial
3
Triaxial
2
Length
36in
60in
36in
60in
BNC Male to Minigrabber®
Test Clips
(0.9m)
(1.5m)
(0.9m)
(1.5m)
1.06in
(26.92mm)
Rating: Hands free testing in controlled voltage
environment: 500 Vrms*.
2.56in
(65.02mm)
Triaxial: Body/Fittings: tarnish resistant nickel-plated
brass; Intermediate and Center Contacts: gold-plated
brass; Dielectric: PTFE.
Cable Type: Double Shielded, 50Ω, RG5BA/U.
Colors: 5223: Yellow, 5054: Yellow.
Triaxial to BNC Adapters on page 24.
2 Lug
1.50in (38.10mm)
8.0in (203.2mm)
See chart on page 9 for additional wire and cable
specifications.
m
Model#
3787-C-18
3787-C-24
3787-C-36
3787-C-48
3787-C-60
Length
18in
24in
36in
48in
60in
(0.5m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
Rating: Hands free testing in
controlled voltage environment:
300 Vrms*.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
Minigrabber: Contacts: beryllium
gold-plated copper; Insulation: glass
filled nylon.
Colors: One black and one red.
See chart on page 9 for additional
wire and cable specifications.
3 Lug
BNC Male to TNC Male,
50Ω Cable
Model#
1948-C-12
Length
12in (0.3m)
BNC Male with Molded
Strain Relief to Minipincer®
Test Clips
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
1.06in
(26.92mm)
1.09in
(27.68mm)
3.37in (85.60mm)
Model#
5423-C-24
5423-C-36
5423-C-48
5423-C-60
Length
24in
36in
48in
60in
(0.6m)
(0.9m)
(1.2m)
(1.5m)
BNC/TNC: Body: tarnish resistant
nickel-plated brass; Contact: goldplated brass; Dielectric: PTFE.
Rating: Hands free testing in
controlled voltage environment:
300 Vrms*.
See chart on page 9 for additional
wire and cable specifications.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
Strain Relief: PVC molded directly
to cable and connectors.
1.50in
(38.10mm)
Phono (RCA) Male to BNC
Male with Molded Strain
Relief
3.37in (85.60mm)
Model#
4963-E-24
4963-E-36
4963-E-48
4963-E-60
Length
24in
36in
48in
60in
(0.6m)
(0.9m)
(1.2m)
(1.5m)
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*.
0.125in (3.18mm)
0.36in (9.14mm)
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
8.0in
(203.2mm)
Colors: One black and one red.
See chart on page 9 for additional
wire and cable specifications.
BNC Male with Molded
Strain Relief to
Micrograbber® Test Clips
Phone Plug: Body and Center
Contact: nickel-plated brass.
3.30in (83.82mm)
2.59in
(65.79mm)
Minipincer: Contacts: beryllium
gold-plated copper; Insulation: glass
filled nylon.
3.37in (85.60mm)
Strain Relief: PVC molded directly
to cable and connectors.
See chart on page 9 for additional
wire and cable specifications.
Model#
4777-C-24
4777-C-36
4777-C-48
4777-C-60
4777-K-24
4777-K-36
4777-K-60
Length
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
24in (0.6m)
36in (0.9m)
60in (1.5m)
Rating: Hands free testing in
controlled voltage environment:
150 Vrms*.
1.50in
(38.10mm)
1.74in
8.0in
(44.19mm)
(203.2mm)
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
Strain Relief: PVC molded directly
to cable and connectors.
Micrograbber: Contacts: beryllium
gold-plated copper; Insulation: glass
filled nylon.
Colors: One black and one red.
See chart on page 9 for additional
wire and cable specifications.
www.pomonaelectronics.com
*see rating message at start of section.
Coaxial Cable Assemblies and Breakouts
BNC Male with Molded
Strain Relief to Alligator
Test Clips
3.37in (85.60mm)
2.13in
(54.10mm)
Model#
4531-C-18
4531-C-24
4531-C-30
4531-C-36
4531-C-48
4531-C-60
Length
18in
24in
30in
36in
48in
60in
(0.5m)
(0.6m)
(0.76m)
(0.9m)
(1.2mm)
(1.5mm)
BNC Male with Molded
Strain Relief to
Maxigrabber® Test Clips
Model#
4648-C-60
Length
60in (1.5m)
Rating: Hands free testing in
controlled voltage environment:
300 Vrms*.
3.37in (85.60mm)
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
Rating: Hands free testing in
controlled voltage environment:
150 Vrms*.
Strain Relief: PVC molded directly
to cable and connectors.
Jaws Opening: 0.3in (7.62mm) max.
7.50in (90.50mm)
1.30in
(33.02mm)
BNC: Body: tarnish resistant nickelplated brass; Center Contact:
gold-plated brass; Dielectric: PTFE.
Strain Relief: PVC molded directly
to cable and connectors.
1.50in (38.10mm)
8.0in
(203.2mm)
6.0in (152.4mm)
Alligator: Body: steel-plated nickel.
BNC Male with Molded
Strain Relief to
Minigrabber® Test Clips
3.37in (85.60mm)
Colors: Vinyl boots: one black and
one red.
Maxigrabber: Contacts: beryllium
gold-plated copper; Insulation: glass
filled nylon.
See chart on page 9 for additional
wire and cable specifications.
Colors: One black and one red.
Model#
5187-C-24
5187-C-36
5187-C-48
5187-C-60
5187-K-24
5187-K-36
5187-K-48
5187-K-60
Length
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
See chart on page 9 for additional
BNC Male with Molded
Strain Relief to Minigator®
Test Clips
3.37in (85.60mm)
1.50in (38.10mm)
1.50in
(38.10mm)
8.0in
(203.20mm)
2.56in
(65.02mm)
8.0in (203.2mm)
1.18in
(29.97mm)
3.37in (85.60mm)
1.50in
(38.10mm)
Length
24in (0.6m)
36in (0.9m)
Rating: +122˚F (+50˚C) max.
See chart on page 9 for additional
wire and cable specifications.
BNC Male to Multi-Stacking
Double Banana Plugs
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
Strain Relief: PVC molded directly
to cable and connectors.
8.0in
(203.2mm)
Grabber: Contacts: gold-plated
stainless steel; Insulation: glass
filled nylon.
Colors: One black and one red.
See chart on page 9 for additional
wire and cable specifications.
*see rating message at start of section.
Model#
2BC-BNC-36
Length
36in (0.9m)
Rating: Hands free testing in
0.75in
controlled voltage environment:
(19.05mm) 500 Vrms*, +122˚F (+50˚C) max.
Rating: Hands free testing in
controlled voltage environment:
150 Vrms*.
1.58in
(40.13mm)
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
Colors: Vinyl boots: one black and
one red.
See chart on page 9 for additional
wire and cable specifications.
5304-K-24
5304-K-36
Rating: Hands free testing in
controlled voltage environment:
45 Vrms*.
Minigator: Body: steel-plated nickel
Colors: One black and one red.
Model#
Length
24in (0.6m)
30in (0.76m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Strain Relief: PVC molded directly
to cable and connectors.
Strain Relief: PVC molded directly
to cable and connectors.
Minigrabber: Contacts: beryllium
gold-plated copper; Insulation: glass
filled nylon.
BNC Male with Molded
Strain Relief to SMD
Grabber® Test Clips
4532-C-24
4532-C-30
4532-C-36
4532-C-48
4532-C-60
Jaws Opening: to 0.18in
(47.50mm) max.
Rating: Hands free testing in
controlled voltage environment:
300 Vrms*.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass; Dielectric: PTFE.
Model#
1.55in
(39.37mm)
1.06in (26.92mm)
Cable Type C: RG58C/U,
0.19in (4.95mm) O.D.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass.
2nd End: Double Banana Plugs.
Body: nickel-plated brass beryllium
copper spring; Insulation: polyproylene. Color: Black.
Strain Relief: PVC molded directly
to cable and connectors.
www.pomonaelectronics.com
15
Coaxial Cable Assemblies and Breakouts
16
BNC Male to Stacking
Pin Tip Plugs
1.06in
(26.92mm)
Model#
2882-C-60
Length
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
Cable Type: RG58C/U,
0.19in (4.95mm) O.D.
BNC: Body: tarnish resistant nickelplated brass; Center Contact: goldplated brass.
ø .080in
(2.03mm)
1.30in
(33.02mm)
Pin Tip Plug: Body: gold-plated
brass; Insulation: polypropylene.
3.37in (85.60mm)
1st End: Crimp BNC Male with Molded
Strain Relief.
Body: tarnish resistant nickel-plated brass;
Center contact: gold-platedbrass;
Impedance: 50Ω, Boot, PVC; Color: black.
See chart on page 9 for additional
wire and cable specifications.
1.35in
(34.29mm)
Rating: Hands free testing in controlled
voltage environment: 500 Vrms*.
BNC: Body: tarnish resistant nickel-plated
brass; Center Contact: gold-plated brass
Strain Relief: PVC molded directly to cable
and connectors.
Cable Type C: RG58C/U
Match to any end shown below
Colors: One black and one red.
Strain Relief: contact soldered to
cable
8.00in
(203.2mm)
BNC Male to ... the ends listed below
60in (1.5m)
BNC Male with Molded
Strain Relief to MultiStacking Banana Plugs
8.0in (203.2mm)
Insulated BNC Male / 4mm
Plugs
2.28in
(58mm)
Model#
72927-C-40
72927-C-80
Length
40in (100cm)
80in (200cm)
1.55in
(39.37mm)
5268-C-24
5268-C-36
5268-C-48
5268-C-60
Length
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
2nd End: Stacking Banana Plugs.
Body: nickel-plated brass beryllium
copper spring; Insulation: polyproylene; Colors: one black and one red.
See chart on page 9 for additional
wire and cable specifications.
Impedance: 50Ω
Rating: 500V Cat I, 150 V Cat II, 3A.
Model#
1.30in (33.02mm)
Color: Black.
BNC Male with Molded
Strain Relief to MultiStacking Double Banana
Plug
1.55in
(39.37mm)
2.20in
(56mm)
IEC Insulated BNC Male to
Stackable/Retractable
4 mm plugs
Model#
72908
4530-C-18
4530-C-24
4530-C-36
4530-C-48
4530-C-60
Length
18in (0.5m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
2nd End: Double Banana Plugs.
.75in
(19.05mm) Body: nickel-plated brass beryllium
copper spring; Insulation: polyproylene. Color: black.
Length
10in (25cm)
See chart on page 9 for additional
wire and cable specifications.
Impedance: 50Ω
1.66in (42mm)
Model#
Rating: 33 Vrms / 70 Vdc, 6A.
BNC Male with Molded
Strain Relief to
Retractable Sheath
Banana Plugs
Color: Black.
2.19in (55.63mm)
Model#
5343-C-12
5343-C-24
5343-C-36
5343-C-48
5343-C-60
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Ideal for use with binding posts.
2nd End: Sheathed Banana Plugs.
Body: nickel-plated brass beryllium
copper spring; Insulation: nylon.
2.13in (54mm)
2.72in (69.09mm)
IEC Insulated BNC Female
to Stackable/Retractable
4 mm plugs
Model#
72909
Length
7.92in (201.17mm)
10in (25cm)
Impedance: 50Ω
2.13in (54mm)
See chart on page 9 for additional
wire and cable specifications.
Rating: 33 Vrms / 70 Vdc, 6A.
BNC Male with Molded
Strain Relief to Square Pin
Receptacles
Color: Black.
7.92in
(201.17mm)
0.52in
(13.21mm)
Model#
4945-K-18
4945-K-24
4945-K-36
4945-K-48
4945-K-60
Length
18in (0.5m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
2nd End: 0.025in (0.6mm)
Square Pin Receptacles
Center Contact; gold-plated brass;
Insulation: ABS; Colors: one black
and one red.
2.19in (55.63mm)
0.10in (2.54mm)
See chart on page 9 for additional
wire and cable specifications.
2.13in (54mm)
www.pomonaelectronics.com
*see rating message at start of section.
Coaxial Cable Assemblies and Breakouts
17
BNC Male or Female to ... the ends listed below
1.54in
(39.12mm)
BNC Male (1st End):
Body: tarnish resistant nickel-plated brass;
Center Contact: gold-plated brass;
Insulation: polypropylene; Dieliectric: PTFE.
0.59in
(14.99mm)
Nominal impedance: 50Ω.
Colors: Black.
1.39in
(34.80mm)
BNC Female (1st End):
Body: tarnish resistant nickel-plated brass;
Center Contact: beryllium gold-plated copper;
Insulation: polypropylene; Dieliectric: PTFE.
0.59in
(14.99mm)
Nominal impedance: 50Ω.
Colors: Black.
Overall length = BNC length + wire length + clip/plug length
Match to any end shown below
...Minigrabber® Test
Clips (2nd End)
Male
Model#
Female
Model#
3789
3788
Wire
Length
5.5in (140mm)
Minigrabber: Contacts: beryllium gold-plated
copper; Insulation: glass filled nylon
2.56in (65.02mm)
... Alligator Test Clips
(2nd End)
2.30in
(58.42mm)
Male
Model#
Female
Model#
2885
2630
Wire
Length
5in (127mm)
Alligator: Body: steel-plated nickel.
Colors: Vinyl boots: one black and one red.
Colors: One black and one red.
Rating: +122˚F (+50˚C) max.
Rating: Hands free testing in controlled
voltage environment: 300 Vrms*, +131˚F
(+55˚C) max.
Rating: Hands free testing in controlled
voltage environment: 150 Vrms*.
Jaw Opening: 0.30in (7.62mm).
...Micrograbber
Test Clips (2nd End)
®
Male
Model#
Female
Model#
5189
5188
Wire
Length
5.4in (137mm)
1.73in (43.94mm)
Micrograbber: Contacts: beryllium goldplated copper; Insulation: glass filled nylon.
... Minigator Test Clips
(2nd End)
1.65in
(41.91mm)
Male
Model#
Female
Model#
2886
2631
Wire
Length
5.9in (149mm)
Minigator: Body: steel-plated nickel.
Colors: Vinyl boots: one black and one red.
Colors: One black and one red.
Rating: Hands free testing in controlled
voltage environment: 45 Vrms*, +122˚F
(+50˚C) max.
Rating: Hands free testing in controlled
voltage environment: 150 Vrms*, +131˚F
(+55˚C) max.
Jaw Opening: 0.18in (47.50mm).
... SMD Grabber®
Test Clips (2nd End)
Male
Model#
Female
Model#
5410
5305
Wire
Length
... Stacking Pin Tip
Plugs (2nd End)
1.18in
(29.97mm)
5.5in (140mm)
Grabber: Contacts: gold-plated stainless steel;
Insulation: glass filled nylon.
... 20 AWG Leads
(2nd End)
1.55in
(39.37mm)
Male
Model#
Female
Model#
3957
3073
Wire
Length
... Stacking Miniature
0.89in
(22.61mm)
Male
Model#
Female
Model#
4815
3966
Wire
Length
5.5in (140mm)
Banana Plug: Body: brass, Spring: beryllium
copper; gold-plated. Insulation: polypropylene.
Colors: One black and one red
Rating: Hands free testing in controlled
voltage environment: 500 Vrms*, +131˚F
(+55˚C) max.
5.5in (140mm)
Rating: Hands free testing in controlled
voltage environment: 500 Vrms*, +131˚F
(+55˚C) max.
Male
Model#
Female
Model#
4970
4969
Wire
Length
5.9in (149mm)
2nd End: None.
Banana Plug: Body: brass, Spring: beryllium
copper; gold-plated. Insulation: polypropylene.
Rating: Hands free testing in controlled
voltage environment: 500 Vrms*, +131˚F
(+55˚C) max.
3221
Rating: Hands free testing in controlled
voltage environment: 500 Vrms*, +131˚F
(+55˚C) max.
5.4in (137mm)
Colors: One black and one red
3901
Wire
Length
Colors: One black and one red.
0.08in (2.03mm) Dia.
Rating: Hands free testing in controlled
voltage environment: 150 Vrms*, +131˚F
(+55˚C) max.
... Multi-Stacking
Banana Plug (2nd End)
Female
Model#
Pin Tip Plug: Body: gold-plated brass;
Insulation: polypropylene.
1.73in (43.94mm)
Colors: One black and one red.
Male
Model#
Female only ... to #8
Spade Lugs (2nd End)
Female Model#
5051
Length
5.4in (136mm)
Spade Lug: Body: Copper, tin-plated;
Insulation: vinyl.
0.98in
(24.89mm)
0.168in Colors: One black and one red.
(4.27mm) Rating: Hands free testing in controlled
0.28in
voltage environment: 500 Vrms*, +131˚F
(7.11mm)
(+55˚C) max.
Female only ... to .025
Square Pin Receptacles
(2nd End)
Female Model#
5069
Length
5.6in (143mm)
Square Pin: Gold-plated phosphor bronze,
0.10in
(2.54mm) ABS insulation.
0.52in (13.21mm)
Colors: One black and one red.
Rating: Hands free testing in controlled
voltage environment: 500 Vrms*, +131˚F
(+55˚C) max.
*see rating message at start of section.
www.pomonaelectronics.com
RF Coaxial Connectors,
Adapters and Kits
Self constructed cable assemblies for specific applications or deluxe
assortments that enable you to be ready for anything. Pomona has
everything from a single reliable adapter to versatile kits packaged in
lightweight, foam padded cases containing all the connections and terminations you might need. Pomona – connecting with quality.
18
Universal Adapter Kit
Multi-RF Direct Adapter Kit
Model# 5698
A comprehensive kit including the
most frequently used 50Ω RF
adapters in a rugged pistol-grip
case. Allows for direct adaptation
without intermediate couplers. All
parts are precision machined brass,
not die-cast, with tarnish resistant
nickel plating. Male center pin contacts are gold plated brass. Female
center contacts are gold plated heat
treated beryllium copper. Insulation
material is high density PTFE.
Kit contains two each: BNC (m),
BNC (f), TNC (m), TNC (f), SMA
(m), SMA (f), N (m), N (f), four
intermediate couplers, one double
Banana Plug, one double Banana
Jack, and case.
Maxi Universal Adapter Kit
Model# 5748
Kit contains two each: BNC (m),
BNC (f), TNC (m), TNC (f), SMA (m),
SMA (f), N (m), N (f), UHF (m), UHF
(F), Mini UHF (m), Mini UHF (f), F
(m), F (f), RCA (m), RCA (f), six
intermediate couplers, one double
Banana Plug, one double Banana
Jack, one sampler, and case.
Kit contains:
3535 BNC (m)/Type N (f)
3288 BNC (f)/Type N (m)
3844 TNC (m)/BNC (f)
4288 SMA(m)/BNC(M)
4290 SMA (m)/BNC (f)
4289 SMA (f)/BNC (m)
4291 SMA (f)/BNC (F)
4298 SMA (m)/Type N (f)
4297 SMA (f)/Type N (M)
4299 SMA (f)/Type N (f)
4292 SMA (m)/TNC (m)
4294 SMA (m)/TNC (f)
4293 SMA (f)/TNC (m)
SMA Adapter Kit
Adapter Kit Accessories
Coupling nut
Adapter to
BNC (m)
BNC (f)
TNC (m)
TNC (f)
SMA (m)
SMA (f)
N (m)
N (f)
UHF (m)
UHF (f)
Model#
5735
5739
5736
5740
5737
5741
5734
5738
5752
5756
5698 5748
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Mini UHF (m)
Mini UHF (f)
RCA (m)
RCA (f)
F (m)
F (f)
Coupler
Dbl Banana Plug
Dbl Banana Post
Sampler
www.pomonaelectronics.com
Model#
5753
5757
5754
5758
5759
5755
5742
5743
5744
5760
4295
4296
3283
3533
3285
3284
4940
3841
3842
4282
4283
4284
4286
SMA (f)/TNC (f)
SMA (m)/Type N (m)
BNC (f-f)
BNC (m-m)
BNC (f-m-f) TEE
BNC (f-f-f) TEE
TNC (f-f) Adapter
TYPE N (f-f)
TYPE N (m-m)
SMA (m-f) Rt Angle
SMA (m-m)
SMA (f-f)
SMA Termination, 50Ω (m)
Model# 72931
A consolidated kit including the
most frequently used SMA adapters
in a rugged pistol-grip case. Allows
for direct adaptation without intermediate couplers. All parts are precision machined brass, not die-cast,
with tarnish resistant nickel plating.
Male center pin contacts are gold
plated brass. Female center contacts are gold plated heat treated
beryllium copper. Insulation material
is high density PTFE.
Individual adapters for the Universal
Adapter Kits are also available.
Coupling nut
Adapter to
Model# 72934
5698 5748
4
1
1
2
2
2
2
2
2
6
1
1
1
Kit contains:
4282 Right Angle SMA Female to SMA Male
4283 Inline SMA Male to SMA Male
4284 Inline SMA Female to SMA Female
4286 SMA Male Terminator Plug
4289 SMA Female to BNC Male
4290 SMA Male to BNC Female
4291 SMA Female to BNC Female
4292
4293
4294
4295
4296
4297
4298
4299
SMA Male to TNC Male
SMA Female to TNC Male
SMA Male to TNC Female
SMA Female to TNC Female
SMA Male to N Male
SMA Female to N Male
SMA Male to N Female
SMA Female to N Female
Ratings: The components in this section have a hands free rating for use in controlled voltage environments.
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
RF Coaxial Connectors, Adapters and Kits
N Adpater Kit
Model# 72932
7/16 DIN Adapter Kit
19
Model# 6254
This kit will enable the field service technician
to connect equipment that has 7/16 DIN
connectors to other equipment that has
Type N connectors. These connectors are
not compatible, but both are commonly
found on the same types of telephone
equipment and test equipment.
A consolidated kit including the
most frequently used Type N
adapters in a rugged pistol-grip
case. Allows for direct adaptation
without intermediate couplers. All
parts are precision machined brass,
not die-cast, with tarnish resistant
nickel plating. Male center pin contacts are gold plated brass. Female
center contacts are gold plated heat
treated beryllium copper. Insulation
material is high density PTFE.
The key feature of the 7/16 DIN connector
is the extremely high resistance to intermodulation interference. These connectors are used in cellular phone and
PCS systems to reduce interference
in crowded cell sites and also in radio,
television and repeater sites.
An assortment of the most useful adapters for
conversion between 7/16 DIN and Type N.
Kit contains:
3288 N Male to 50Ω BNC Female
3535 N Female to 50Ω BNC Male
3841 Inline N Female to N Female
3842 Inline N Male to N Male
3843 Right Angle N Female to N Male
4286 N Male to SMA Male
4297 N Male to SMA Female
Broadcast BNC
Adapter Kit
4298 N Female to SMA Male
4299 N Female to SMA Female
5089 T Style N Female to N Female
to N Female
4240-50 50Ω N Terminator Plug
4240-75 75Ω N Terminator Plug
*see rating message at start of section.
6256 7/16 DIN Male to Type N Male Adapter
6257 7/16 DIN Male to Type N Female Adapter
6259 7/16 DIN Female to Type N Male Adapter
6260 7/16 DIN Female to Type N Female Adapter
7/16 DIN Male to 7/16 DIN Female Right Angle Adapter
7/16 DIN Female to 7/16 DIN Female Splice
All parts are protected by a custom zippered case with
die cut foam padding.
Model# 72933
A comprehensive kit including the
most frequently used 75Ω BNC
adapters in a rugged pistol-grip
case. Allows for direct adaptation
without intermediate couplers. All
parts are precision machined brass,
not die-cast, with tarnish resistant
nickel plating. Male center pin contacts are gold plated brass. Female
center contacts are gold plated heat
treated beryllium copper. Insulation
material is high density PTFE.
Kit contains
6737 75Ω BNC f/f Adapter
6738 75Ω BNC f/f/f Adapter
6739 75Ω BNC f/m/f Adapter
6740 75Ω BNC m/m Adapter
6754 BNC (F/M/F) Adapter, In-Line, 75Ω
6779 BNC (m) / f (f), 75Ω
6780 BNC (f) / f (f), 75Ω
6781 BNC (f) / F (m), 75Ω
6782 BNC (m) / F (m), 75Ω
Kit contains one each:
1297 Adapter, BNC(f), Phono Plug
3837 BNC (f)/Tini Plug
4043 Adapter, BNC(M), Phono Jack
4267 BNC (f)/Microplug
5319 BNC Female to Phono Plug
4054 BNC (m) to Phono Jack Adapter
4719 BNC (f)/Bantam Plug
5008 BNC (f)/.090 Video Plug
6519 BNC TO Mini-WECO Adapter
3840-75 BNC (m) Resistor Terminator
Plug, 75Ω
Universal Adapter Cable
Model#
5749-24
5749-36
5749-48
5749-60
5749-72
Length
24in
36in
48in
60in
72in
(0.6m)
(0.9m)
(1.2m)
(1.5m)
(1.8m)
Make cable assemblies with any
of the adapters in the universal
adapter kits.
Coaxial LAN Test
Accessory Kit
Model# 6201
An assortment of products to test or
troubleshoot coaxial cable local area
networks.
Kit contains: two 50Ω BNC Cables,
Male to Male and Male to Female;
2 break-outs, BNC (M) to minigrabber® test clips and BNC (M)
to minigators: 3 BNC (M)
termination plugs for 50, 75,
and 100 Ω impedance; 8 BNC
and type N adapters, BNC (F-F),
BNC T (F-M-F), BNC Rt angle (MF), BNC (M-M), BNC (F)/Type N (M),
BNC (M)/Type N (F), Type N (F-F),
and Type N (M-M); and 2 Type N
(M) termination plugs for 50 and
75 Ω impeance.
www.pomonaelectronics.com
RF Coaxial Connectors, Adapters and Kits
20
BNC Female to Double
Stacking Banana Plug
Model# 1269
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
0.75in
(19.05mm) Material: Banana Plug Jack: brass;
Spring: heat treated berylliumcopper; Finish: nickel plating.
1.13in
(28.70mm)
4mm Safety Banana Jack to
2mm Banana Plug Adapter
Model#
72914-02
72914-0
72914-2
0.35in
(9mm)
Accepts 4mm safety-sheathed
banana plugs.
1.81in (46mm)
Rating: 33 Vac / 70 Vdc, 36A.
2.05in (52.07mm)
BNC Male to Double
Stacking Banana Plug
Model# 1270
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
0.75in
(19.05mm) Material: Banana Plug Jack: brass;
Spring: heat treated berylliumcopper; Finish: nickel plating.
1.13in
(28.70mm)
BNC Female to Stackable
Binding Posts
BNC Female to Double
Banana Plug
Model# 1468
4 solder turrets provide access
between BNC and isolated banana
plugs.
2.05in (52.07mm)
Model# 1452
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
0.75in
(19.05mm)
1.19in
(30.27mm)
2.30in (58.42mm)
(open)
2.20in (55.88mm)
BNC Male to Stackable
Isolated Binding Posts
with 4 Terminals
Model# 1469
4 solder turrets for component
attachments.
Use to make your own attenuator,
balun, or filter.
0.42in
(10.67mm)
Rating: Hands free testing in
0.75in
(19.05mm) controlled voltage environment:
500 Vrms*, +131˚F (+55˚C) max.
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +131˚F (+55˚C) max.
0.75in
(19.05mm)
BNC: isolated from Banana Plugs.
0.42in (10.67mm)
Material: Banana Plug Jack: brass;
Spring: heat treated berylliumcopper; Finish: nickel plating.
2.48in (62.99mm)
(open)
BNC Male with Binding Post
Insulated BNC (m) to
2 male banana 4 mm plugs
Model# 72910
Model# 3430-*
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +239˚F (+115˚C) max.
0.44in
(11.18mm)
Rating: 500V Cat I, 150V Cat II.
1.55in
(39.37mm)
1.34in
(34mm)
*Std. Colors: -0 Black, -2 Red.
BNC Female to Single
Banana Plug
2.5in
(63mm)
Model# 1894
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
0.50.in
(12.70mm)
Insulated BNC (f) to
2 male banana 4 mm plugs
2.03in (51.56mm)
Model# 72911
Rating: 500V Cat I, 150V Cat II.
1.34in
(34mm)
BNC Female to Miniature
Double Banana Plug
Model# 3269
Allows a BNC male to be used
with equipment having 0.50in
(12.70mm) spaced miniature
banana jacks.
0.50in
(12.70mm)
2.72in (69mm)
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
1.47in (37.34mm)
BNC Male to Stackable
Binding Posts
Model# 1296
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
0.75in
(19.05mm)
1.19in
(30.27mm)
Color
Set, Black and Red
10 pack, Black
10 pack, Red
2.49in (63.25mm)
(open)
www.pomonaelectronics.com
BNC Male to Miniature
Stackable Binding Posts
Model# 3296
Binding posts also accept miniature
double banana plugs.
0.88in
(22.35mm)
1.93in (49.02mm)
(open)
0.50in
(12.70mm)
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
*see rating message at start of section.
RF Coaxial Connectors, Adapters and Kits
BNC Female to Single
Banana Plug with Ground
Lead
BNC 50Ω Attenuator
Model# 4684
Use with equipment having banana
plugs or binding posts with
non-standard spacing.
1.98in (50.29mm)
18 AWG Ground wire, 2.5in
(63.50mm) long.
1.54in
(39.12mm)
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +131˚F (+55˚C) max.
Model#
4108-3dB
4108-6dB
4108-10dB
4108-14dB
4108-20dB
dB
3dB
6dB
10dB
14dB
20dB
Rating: 2W Avg. @ 77°F (25°C)
max.
50Ω impedance. Metal film resistor
attenuator.
2.11in
(53.59mm)
BNC In-Series Resistor
Attenuator
BNC Male/Female with
DC-Blocking Series
Capacitor
1.98in (50.29mm)
1.98in (50.29mm)
Model# 5297
Use for sensitive RF measurements.
Model#
4391-25
4391-50
4391-75
4391-600
Ω
25
50
75
600
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +216˚F (+102˚C) max.
Rating: Frequency Range DC to
500 MHz, +216˚F (+102˚C) max.
Capacitor: 1000 pF, 600 Vdc.
Add series resistance to coaxial
lines.
1%, 2W, non-inductive film resistor.
BNC to Banana Plug and
Binding Post Adapter Kit
Model# 5510
An assortment of many of Pomona’s most
popular BNC
Type N Male Terminator
Plugs
2.07in
(52.58mm)
Model#
Ω
4240-50
4240-75
50
75
Kit contains one each:
BNC Female to Stacking Double Banana Plug
BNC Male to Stacking Double Banana Plug
BNC Male to Stackable Binding Posts
BNC Female to Stackable Binding Posts
BNC Female to Female
BNC Male to Male adapters.
Rating: Frequency Range DC to
500 MHz, Power: 1W @ 158°F
(70˚C) max.
Accuracy: 1%.
BNC Male Terminator Plugs
1.44in
(36.83mm)
Model#
3840-50
3840-75
3840-93
3840-100
3840-600
Ω
50
75
93
100
600
BNC 50Ω Attenuator Kit
Model# 5513
Kit contains five Model 4108 BNC
50Ω attenuators, one each of 3dB,
6dB, 10dB, 14dB and 20dB.
(Same as Model 4108).
Rating: Frequency Range DC to
500MHz, Power .5W @ 158°F
(70˚C) max.
Accuracy: 1%.
BNC Feed-Thru Termination
1.45in
(36.83mm)
Model#
4119-50
4119-75
4119-93
4119-600
Ω
50
75
93
600
BNC Male Terminator
Plug Kit
Model# 5512
Rating: 2W Carbon film resistor.
Kit contains five BNC Male terminator plugs for 50, 75, 93, 100, and
600 Ω impedance.
Accuracy: 2%.
(Same as Model 3840 below.)
Frequency Range: DC to 500 MHz,
+216˚F (+102˚C) max.
*see rating message at start of section.
www.pomonaelectronics.com
21
RF Coaxial Connectors, Adapters and Kits
22
50Ω BNC Straight RF Plugs
Model# Type
1.06in
(26.92mm)
Fig. 1: Compression Style
1.11in
(28.19mm)
Special Features
50Ω Impedance
Fig. Cable Group RG /U BNC
Rating: Hands free testing in controlled voltage
environment: 500 Vrms.
4488
BNC (m)
BNC: Body: tarnish resistant nickel-plated brass;
Center Contact: male: gold- plated brass; female:
gold- plated beryllium copper; Dielectric: PTFE.
4997
5079
BNC (m)
BNC (m)
*Performance: 4 GHz with VSWR of 1.3
maximum from 0 to 4GHz.
5286
BNC (m)
7035 and 7037: Use with crimp die set model
7278, crimp tool model 7277.
5307
BNC (m)
1
5285
5344
7035*
BNC (m)
BNC (f)
BNC (m)
2
3
2
7037*
7040*
7041*
BNC (m)
BNC (m)
BNC (m)
2
2
2
7207*
BNC (m)
1
7040 and 7041: Use with crimp die set model
7279, crimp tool model 7277.
Fig. 2: Crimp Style
1.19in
(30.23mm)
1
50Ω Impedance
1
1
75Ω Impedance
2
50Ω Impedance
Crimp
142, 142A, 142B, 223, 58,
5B, 5BA, 5BC, 8C, 141, 141A
RG58 only
59, 59A, 59B, 62,
62A, 62B, 62C, 210
59, 59A, 59B, 62,
62A, 62B, 62C, 210
174, 174A, 179B, 187,
187A, 188, 188A, 316
58, 58A, 58C, 141, 141A
58, 58A, 58C, 141, 141A
RG55A, 142, 142A,
223, 400
RG58, 58A, 58C, 141, 141A
RG174, 188, 188A, 316
RG179, 179B, 187, 187A,
174, 188, 188A, 316
RG-223
Fig. 3: Crimp Style
BNC Within Series Adapters
1.30in
(33.02mm)
0.92in
(23.37mm)
1.30in
(33.02mm)
1.53in
(38.8mm)
1.13in
(28.70mm)
0.72in
(18.29mm)
3284
1.27in
(32.3mm)
6700
3534
0.88in
(22.35mm)
3285
1.26in
(32.0mm)
1.50in
(38.10mm)
1.32in
(33.53mm)
0.70in
(17.78mm)
0.490in
(12.47mm)
4896
3283
1.25in
(31.75mm)
1.55in
(39.37mm)
1.40in
(35.56mm)
BNC Within Series
3847
See Cutout
Model# 5511
An assortment of Pomona’s popular
BNC within series adapters.
Kit contains one each:
BNC Female to Female 3283
BNC T (Female/Female/Female) 3284
BNC T (Female/Male/Female) 3285
BNC Male to Male 3533
BNC Right Angle Male to Female 3534
BNC T (Male /Female/Female) 4896
www.pomonaelectronics.com
Right Angle
Hermetically Sealed (b)
Isolated Ground (a)
In-line
Right Angle
BNC (f/f)
BNC (m/m)
BNC (f/m/f)
BNC (f/f/f)
BNC (m/f/f)
BNC (f/m)
BNC (f/f)
BNC (f/f)
BNC (f/m/f)
BNC (f/m/f)
Notes: (a) Mounting hardware is isolated from
outer conductor of BNC, (b) Leakage rate less than
10-7 cc/sec of tracer gas at one atmosphere.
Impedance: 50Ω.
0.50in (12.70mm)
0.660in
(16.76mm)
3846
See Cutout
Special Features
3283
3533
3285
3284
4896
3534
3847
3846
6700
6701
Rating: Hands free testing in controlled voltage
environment: 500 Vrms*, -85˚F to +329˚F
(-65˚C to +165˚C).
6701
0.69in
(17.53mm)
3533
1.11in
(28.1mm)
Model# Type
BNC: Shell: tarnish resistant nickel-plated brass;
Center Contact: male: gold-plated brass; female:
gold-plated beryllium copper; Dielectric: PTFE.
Bandwidth: to 4 GHz.
0.47in
(11.95mm)
Panel Cut-Out
for 3846/3847
BNC Shorting Cap or Dust
Cap
Model#
Type
5085
3839
Shorting cap
Dust cap
Shorting cap provides protection and
supplies a short across an input.
Dust cap protects sensitive instrument
inputs and is non-shorting.
Tarnish resistant plating.
3in (76.20mm) long chain.
*see rating message at start of section.
RF Coaxial Connectors, Adapters and Kits
BNC Panel Receptacles – 50Ω
1.08in
(27.43mm)
1.21in (30.73mm)
0.125in
(3.18mm)
0.375in
(9.53mm)
0.453in
(11.50mm)
0.125in
(3.18mm)
0.50in
(12.70mm)
0.531in
(13.49mm)
Type
Special Features
2447
2451
2447A
2451A
BNC (m)
BNC (f)
BNC (m)
BNC (f)
0.531in (13.46mm) hole
spacing ctr. to ctr.
0.50in (12.70mm) hole
spacing ctr. to ctr.
BNC: Shell: tarnish resistant nickel-plated brass; Center
Contact: male: gold-plated brass; female: gold-plated
beryllium copper; Dielectric: PTFE .
Panel Cut-Out
for 2447A/2451A
Cut-Out
for 2447/2451
2451/2451A
2447/2447A
BNC Female PCB Mount
Model# Type
0.94in
(23.87mm)
0.16in
(4.06mm)
long
0.16in
(4.06mm)
long
0.25in
(6.35mm)
long
4788
4578
Ω
Material
Vertical BNC
R/A BNC
Dual R/A BNC
Dual R/A BNC
Straight
Brass
White Valox
White Valox
Brass
50Ω
50Ω
50Ω
75Ω
50Ω
BNC: Body: tarnish resistant nickel-plated brass; Contact:
gold-plated beryllium copper. Dielectric: PTFE.
7073
*Performance: 4 GHz with Vswr of 1.3 maximum from
0 to 4GHz.
1.31in
(33.1mm)
1.31in
(33.1mm)
4578
4788
6717
6718
7073*
Rating: Hands free testing in controlled voltage environment:
500 Vrms*, Impedance: 50Ω, -85 to +329˚F (+165 to -65˚C)
0.88in
(22.23mm)
0.69in
(17.53mm)
0.695in
(17.65mm)
23
Model#
1.14in
(29.0mm)
1.14in
(29.0mm)
0.10in
(2.54mm)
0.50in
(12.70mm)
1.42in
(35.9mm)
1.42in
(35.9mm)
Cut-Out
for 4578/4788/7073
6718
6717
2x 0.079in (2.0mm)
0.25in
(6.35mm)
0.50in
(12.70mm)
0.20in
(5.08mm)
4x 0.40in
(10.16mm)
0.20in (5.08mm)
0.40in (10.16mm)
Cut-Out
for 6717/6718
BNC Bulkhead Receptacles – 50Ω
Model# Type
1.24in (31.50mm)
1.08in (27.43mm)
1.21in (30.73mm)
0.375in
(9.52mm)
0.35in
(88.90mm)
4159
4160
4979
0.25in (6.35mm)
4160
4159
BNC (f)
BNC (f)
4979
BNC (m)
Special
Features
Hermetically
Sealed*
Max. Panel
Thickness
0.10in (2.54mm)
0.37in (9.40mm)
0.19in (4.83mm)
* Leakage rate less than 10 cc/sec of tracer gas at one
atmosphere.
-7
Panel Cut-Out
BNC: Body: tarnish resistant nickel-plated brass; Center
Contact: male: gold-plated brass; female: gold-plated
beryllium copper (except as noted); Dielectric: PTFE.
Isolated Ground BNC Female Bulkhead Receptacles
0.50in
(12.7mm)
1.10in (27.94mm)
1.32in (33.53mm)
0.47in
(11.95mm)
3778
*see rating message at start of section.
Cut-Out
for 3778
0.375in
(9.53mm)
0.350in
(8.89mm)
5148
Panel Cut-Out
for 5148
Model# Special Features
Max. Panel Thickness
3778
5148
0.175in (4.45mm)
0.18in (4.57mm)
50Ω Teflon Insulation
50Ω Valox Insulation
BNC: Body: tarnish resistant nickel-plated brass;
Center Contact: male: gold-plated brass;
female: gold-plated beryllium copper.
Mounting hardware is isolated from outer conductor of BNC.
www.pomonaelectronics.com
Coaxial – SMA, SMB, TNC Connectors and Adapters
24
BNC Male with Strain Relief Boot
Fits Cable
Model# Types
Make your own cable with strain relief.
5076: Black boot with nut only.
For use with connectors using a 7/16-28
clamp nut. Simply replace supplied nut
with the one on the boot.
2.75in (69.85mm)
For Cable O.D.
5066-* RG 58, 141 0.185in - 0.200
(4.70mm - 5.08mm)
5068-* RG 174,
0.090in - 0.110in
187, 188
(2.29mm - 2.79mm)
5076-* RG 58, 141 0.185in - 0.200in
(4.70mm - 5.08mm)
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
*Specify color
Strain Relief Boot
Rating: +122˚F (+50˚C) Max.
Fits Cable
Model# Types
For
Cable O.D.
5155-* RG 58, 141
0.185in - .200
(4.70mm - 5.08mm)
0.237in - .247in
(6.02mm - 6.27mm)
0.090in - .110in
(2.29mm - 2.79mm)
Use with crimp type connectors.
5156-* RG 59,
62, 210
5157-* RG 174,
187, 188
Sold in packages of 10.
2.75in (69.85mm)
Colors
-0 Black,
-2 Red
-0 Black
-2 Red
-0 Black
*Specify color
TNC Style RF Plugs and Jacks
Frequency Range: 11 GHz with VSWR of 1.3
maximum from 0 to 11GHz.
0.95in
(24.0mm)
Impedance: 50Ω.
TNC: Shell: tarnish resistant nickel- plated
brass; Contact: male: gold-plated brass;
female: gold-plated heat treated beryllium
copper; Dieletric: PTFE.
Model# Type
Special Features
7048
TNC (m)
50Ω Captive
7049
TNC (m)
7050
TNC (m)
7063
TNC (f)
50Ω Crimp
and Captive
50Ω Crimp
and Captive
50Ω Bulkhead
Receptacle, Crimp
50Ω Panel
Receptacle, Crimp
50Ω Bulkhead
Receptacle, Solder
50Ω Bulkhead
Receptacle, Crimp
7064
TNC (f)
7049: Use with crimp die set model 7278,
crimp tool model 7277.
7065
TNC (f)
7063 and 7064: Use with crimp die set
model 7278, crimp tool model 7277.
7066
TNC (f)
7066: Use with crimp die set model 7279,
crimp tool model 7277.
SMA Connector
8.38in
(0.33mm)
Model# Fits Cable Types
7.92in (0.312mm) Hex
4804
4805
4859
6.35in (0.250mm) Hex
0.90in
(22.86mm)
4283
0.59in
(14.99mm)
RG174, 188A, 316, B7805A
Model# 4286
VSWR: 1.25 max. to 18GHz, 1/2 W,
85˚F to +329˚F (65˚C to +165˚C).
0.31in (7.87mm) Hex
Resistor Terminator.
Gold-plated stainless steel with
Teflon insulation.
SMA Shorting Cap
SMA within Series Adapters
RG58, 58A, 58C, 141,
303, LMR195, Belden 7806A
RG174, 188A, 316, B7805A
Impedance: 50Ω 1/2 W., 1%.
SMA: Shell: passivated steel;
Dieletric: PTFE.
4805 SMA(F)
RG58, 58A, 58C, 141,
141A, 55A, 142, 142A, 223, 499
RG55, 142, 223, 400
Rating: Hands free testing in
controlled voltage environment:
335 Vrms*.
Impedance: 50Ω.
7.11in (0.28mm)
0.64in
(16.26mm)
0.60in
(15.24mm)
Supplied with center conductor and
sleeve.
4804/4859 SMA(M)
0.67in
(17.02mm)
SMA Male Terminator Plug
RG174, RG179, RG187
RG188, RG316
RG55, RG142
Cable Group RG /U
RG58, 58A, 58C, 141,
141A, 55A, 142, 142A, 223, 499
RG55A, 142, 142A, 223, 400
0.36in (9.14mm)
Model#
Outer Shell
5088
Gold Plated
Model# Type
4282
4283
4284
SMA (f) to (m), Rt. Angle
SMA (m) to (m)
SMA (f) to (f)
0.31in (7.87mm) Hex
Screw onto SMA female. Protects
sensitive instrument inputs or
provides a necessary reference
short. Gold-plated steel center
contact.
SMA: Shell: gold-plated brass;
Center Contacts: gold-plated brass;
Dieletric: PTFE.
Frequency Range: 4283, 4284:
186Hz; 4282: 12GHz.
4282
SMA Bulkhead
Model# Type
4285
0.90in
(22.86mm)
0.26in
(6.60mm)
4284
www.pomonaelectronics.com
0.31in (7.87mm) Hex
SMA (f) to (f)
SMA: Shell: gold plated brass;
Center Contacts: gold plated brass;
Dieletric: PTFE.
Panel Cut-Out
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
*see rating message at start of section.
Coaxial – SMA, SMB, N Connectors and Adapters
SMA Female Panel
Receptacle
0.340in
(8.63mm)
0.67in
(17.02mm)
Model# 4850
0.500in
(12.70mm)
SMB Cable Plugs/Jacks
Rating: Hands free testing in
controlled voltage environment:
335 Vrms*, -85˚F to +329˚F
(-65˚C to +165˚C).
1.22in (30.99mm)
Model#
5375
5379
Fit Cable
Types
Impedance: 50Ω.
SMA: Body: gold-plated stainless
0.102in steel; Center Contact: gold-plated.
25.91mm beryllium copper; Dieletric: PTFE.
Panel Cut-Out x4
Flange thickness: 0.065in
(1.65mm).
Type
SMB (f) Connector
Crimp Type
SMB (m) Connector
Crimp Type
RG 174, 179, 187,
188, 316
These SMB (Subminiature “B”)
connectors snap together for quick
assembly.
5375
1.19in (30.23mm)
Rating: Hands free testing in
controlled voltage environment:
335 Vrms*, -85˚F to +329˚F
(-65˚C to +165˚C).
Impedance: 50Ω.
SMA PCB Mounting Female
0.20in
(5.08mm)
0.38in
(9.65mm)
0.17in
(4.32mm)
0.050in
(1.27mm)
Model# 4959
Frequency Range: DC to 4GHz.
5379
SMB: Shell: tarnish resistant nickelplated brass; Contact: male: goldplated brass; female: gold-plated
beryllium copper; Dieletric: PTFE.
Rating: Hands free testing in
controlled voltage environment:
335 Vrms*, -85˚F to 329˚F
(-65˚C to +165˚C).
0.20in
Impedance: 50Ω.
(5.08mm)
SMA: Body: gold-plated stainless
steel; Center Contact: gold-plated
beryllium copper; Dieletric: PTFE.
0.10in
(2.54mm)
Panel Cut-Out
Type N Striaght RF Plugs and Jacks
1.17in (29.8mm)
Model# Type
Special Features
Cable Group RG /U
Performance
7057
N (m)
50Ω Crimp
RG55, 142, 223, 400
11 GHz with
Vswr of 1.3
maximum from
0 to 11 GHz
7058
N (m)
6767
N (m)
50Ω Compression
Style
75Ω Plug, Crimp
58, 58A, 58C,
141, 141A
RG59
6768
N (f)
75Ω Jack, Crimp
RG59
3 GHz with Vswr
of 1.1 maximum
from 0 to 1 GHz
and 1.35 from
1 to 3 GHz
N: Body: bronze-plated white brass; Center Contact: male: gold-plated brass; female: goldplated heat treated beryllium copper; Dieletric: PTFE.
7057: Use with crimp die set model 7281, crimp tool model 7277.
Type N Connectors
1.37in
(34.80mm)
Model# Type
Description
4787
Cable connection for
RG58 and 142, 223, 141
N (m)
N: Body: bronze-plated white brass; Center
Contact: male: gold-plated brass; female:
gold-plated beryllium copper; Dieletric: PTFE.
Impedance: 50Ω .
Type N Male Terminator
Plugs
2.07in
(52.58mm)
Model#
4240-50
4240-600
Ω
50
600
Rating: Frequency Range DC to
500 MHz, Power: 1W @ 158°F
(70˚C) max.
Accuracy: 1%.
Rating: Hands free testing in controlled voltage
environment: 1,000 Vrms*.
4787
*see rating message at start of section.
www.pomonaelectronics.com
25
Coaxial – N, Triax and Twinax Connectors and Adapters
26
Type N RF Panel
Mount
Model#
Type
Ω
6769
N (f)
75Ω
Performance
3GHz with VSWR of
1.1 maximum from
0 to 1GHz and 1.35
from 1 to 3GHz
11GHz with VSWR of
1.3 maximum from
0 to 11GHz
0.66in
(16.8mm)
7074
N (f)
50Ω
Type N Panel Mount
Receptacle
1.35in
(34.29mm)
Material: Body: bronze-plated white brass; Contacts:
female (6769): gold-plated heat treated beryllium
copper; female (7074): gold plated (30 micro-inches)
brass; Dieletric: PTFE.
Type N RF Adapter
1.42in
(36.1mm)
Model#
Type
6770
6771
6772
N (f/f)
N (m/m)
N (f/f/f)
0.718in
(18.24mm)
1.35in
(34.29mm)
Type
2455
4956
N (f)
N (f)
ø 0.125in
(3.18mm)
N: Body: bronze-plated white
brass; Center Contact: female:
gold-plated beryllium copper;
Dieletric: PTFE.
ø 0.641in
(16.28mm)
Impedance: 50Ω.
Rating: Hands free testing in
controlled voltage environment:
1,000 Vrms*.
Panel Cut-Out
for 2455
2455
Model#
0.718in
(18.24mm)
ø 0.125in
(3.18mm)
ø 0.641in
(16.28mm)
Performance: 3GHz with VSWR of 1.1 maximum
from 0 to 1GHz and 1.35 from 1 to 3GHz
N: Body: bronze-plated white brass; Contacts: female:
gold-plated heat treated beryllium copper; male: goldplated brass; Dieletric: PTFE.
4956
Panel Cut-Out
for 4956
Impedance: 75Ω.
Type N Adapters
1.44in
(36.58mm)
1.29in
(32.77mm)
1.60in
(40.64mm)
1.77in
(44.96mm)
1.28in
(32.51mm)
Model#
Type
3841
3842
3843
5089
N (f/f)
N (m/m)
N (f/m)
N (f/f/f)
1.28in
N: Body: bronze-plated white brass; Center Contact: male:
(32.51mm) gold-plated brass; female: gold-plated beryllium copper;
Dieletric: PTFE.
Impedance: 50Ω.
3841
3842
f
3843
5089
Rating: Hands free testing in controlled voltage
environment: 1,000 Vrms*.
Triaxial Cable Plugs and Jacks
Model# Lugs
1.53in
(38.86mm)
1.53in
(38.86mm)
3600
m
4661
1.43in
(36.32mm)
2 Lug
f
0.50in
(12.7mm)
3600/5056
(Mates with 3850
and 4388)
4661
5218
0.47in
(12.01mm)
5218
(Mates with 5219)
m
Panel Cut-Out
for 4661
3 Lug
Triaxial Adapters
m
5056
1.50in
(38.10mm)
0.50in
(12.7mm)
1.39in
(35.31mm)
0.47in
(11.94mm)
f
2 Lug
5290
www.pomonaelectronics.com
5178
Max. Panel
Thickness
Fits Cable Types
2 Lug
(m)
2 Lug 0.14in (3.56mm)
(f)
2 Lug
(m)
3 Lug
(m)
Belden twinaxial 9272
0.242in (6.15mm) O.D.
Microdot 293-3930
0.175in (4.45mm) O.D.
Belden triaxial 9222
0.242in (6.15mm) O.D.
Triaxial: Body/Fittings: tarnish resistant nickel-plated brass;
Center Contact: male: gold-plated brass; female: gold-plated
beryllium copper; Outer Contact: gold-plated beryllium copper;
Dieletric: PTFE.
Model#
5178
5290
Lugs
Max. Panel Thickness
2 Lug (f)
2 Lug (f)
0.25in (6.35mm)
Triaxial: Body/Fittings: tarnish resistant nickel-plated brass;
Center Contact: female: gold-plated beryllium copper;
Outer Contact: gold-plated beryllium copper; Dieletric: PTFE.
Cut-Out
for 5178
*see rating message at start of section.
Coaxial – Triax and Twinax Connectors and Adapters
Triaxial Female Bulkhead Receptacles
1.16in
(29.46mm)
0.375in
(9.53mm)
0.50in
(12.70mm)
0.417in
(10.59mm)
0.35in
(88.90mm)
3580
1.31in
(33.27mm)
Cut-Out
for 3580 and 4388
0.60in
(15.24mm)
Lugs
3580
4388
2 lug (f)
2 lug (f)
Hermetically Sealed (a)
3 lug (f)
5219
Panel Cut-Out
for 5219
Max. Panel Thickness
0.25in (6.35mm)
0.25in (6.35mm)
0.14in (3.56mm)
Note: (a) Leakage less than 10-7 cc/sec tracer gas at one
atmosphere.
Triaxial: Body/Fittings: tarnish resistant nickel-plated brass;
Center Contact: female: gold-plated beryllium copper; Outer
Contact: gold-plated beryllium copper; Dieletric: PTFE.
1.16in
(29.46mm)
5219
Twinax Bulkhead
Receptacle
Model# 4957
Use on twinaxial cable types RG108 and Belden 9272.
1.13in
(28.70mm)
Model#
0.50in
(12.70mm)
4388
Twinax Cable
Plug
0.453in
(16.5mm)
Polarized Contact (One Male, One Female).
1.13in
(28.70mm)
Model#
4958
Max. Panel Thickness
0.13in (3.30mm)
Rating: Hands free testing in controlled voltage
environment: 500 Vrms*, -85 to +329˚F (-65 to
+165˚C).
Rating: Hands free testing in controlled voltage environment:
500 Vrms*, -85 to +329˚F (-65 to +165˚C).
Material: Body: tarnish resistant nickel-plated brass;
Contact: male: gold-plated brass; female: gold-plated
beryllium copper; Dieletric: PTFE.
0.38in
(9.65mm)
0.35in
Polarized Contact (One Male, One Female).
(8.68mm)
Material: Body: tarnish resistant nickel-plated brass;
Contact: male: gold-plated Bbrass; female: goldplated beryllium copper; Dieletric: PTFE.
Panel Cut-Out
Crimp Tools
Model#
Type
7277
Crimp Tool (handle only)
7278
7279
7280
7281
7282
*see rating message at start of section.
Features
Professional grade crimp tool handle for consistent crimping.
Accommodates multiple cable sizes. Ratchet style locking with
cushioned grips for easy handling. Body is high carbon steel
tool; steel is powder coated
Crimp, Die Set RG 55/58/
Professional grade precision die set. Cavity dimensions are
59/62/141/142/223/303/400 0.255 in, 0.213 in and 0.068 in. Easily interchangeable.
Use with Pomona Crimp Tool 7277
Crimp, Die Set RG 174/178/
Professional grade precision die set. Cavity dimensions are 0.178 in,
179/180/187/188/195/
0.128 in and 0.068 in. Easily interchangeable. Use with Pomona Crimp
196/316
Tool 7277
Crimp, Die Set RG 6/59/
Professional grade precision die set. Cavity dimensions are
Belden 8281
0.324 in, 0.255 in, 0.068 in and 0.042 in. Easily interchangeable. Use
with Pomona Crimp Tool 7277
Crimp, Die Set 5 Cavity RG
Professional grade precision die set. Cavity dimensions are 0.255 in,
58/59 N, BNC, TNC, SMA
0.213 in, 0.100 in, 0.068 in and 0.052 in. Easily interchangeable. Use
with Pomona Crimp Tool 7277.
Crimp, Die Set for sizes
Professional grade precision die set. Cavity dimensions are 0.278 in,
7.11 mm, 6.60 mm, 1.78 mm, 0.255 in, 0.068 in and 0.022 in. Easily interchangeable. Use with Pomona
1.02 mm (0.28 in, 0.26 in,
Crimp Tool 7277
0.07 in, 0.04 in)
www.pomonaelectronics.com
27
Coaxial – Between Series Adapters
28
SMA to BNC
1.06in
(26.92mm)
Model# Type
1.03in
(25.16mm)
1.25in
(31.75mm)
4288
4290
4289
4291
1.00in
(25.40mm)
SMA (m) to BNC (m)
SMA (m) to BNC (f)
SMA (f) to BNC (m)
SMA (f) to BNC (f)
Rating: Hands free testing in
controlled voltage environment:
335 Vrms*.
4288
4290
4289
Impedance: 50Ω.
4291
SMA: Shell: gold-plated brass;
Center Contacts: gold-plated brass;
Dieletric: PTFE.
SMA to Type N
1.30in
(33.02mm)
Model# Type
1.21in
(30.73mm)
1.28in
(35.12mm)
4296
4298
4297
4299
1.17in
(24.72mm)
SMA (m) to type N (m)
SMA (m) to type N (f)
SMA (f) to type N (m)
SMA (f) to type N (f)
Rating: Hands free testing in
controlled voltage environment:
335 Vrms*.
Impedance: 50Ω.
4296
4298
Material: Shell: gold-plated brass;
Center Contacts: gold-plated brass;
Dieletric: PTFE.
4299
4297
SMA to TNC
1.06in
(26.92mm)
Model# Type
1.03in
(25.16mm)
1.17in
(29.72mm)
4292
4294
4293
4295
1.06in
(26.92mm)
SMA (m) to TNC (m)
SMA (m) to TNC (f)
SMA (f) to TNC (m)
SMA (f) to TNC (f)
Rating: Hands free testing in
controlled voltage environment:
335 Vrms*.
4292
4294
4293
Impedance: 50Ω.
4295
Material: Shell: gold-plated brass;
Center Contacts: gold-plated brass;
Dieletric: PTFE.
Type N to BNC
1.46in
(37.08mm)
Model# Type
3535
3288
BNC (m)/N (f)
BNC (f)/N (m)
Special Features
UHF to BNC
3287
Beryllium Copper
Male Contact
1.31in
(33.27mm)
3286
Rating: 500 Vrms max., -85 to +325˚F
(-65 to +165˚C) (except as noted).
Impedance: 50Ω (except as noted).
3535
1.46in
(37.08mm)
N: Shell: tarnish resistant nickel-plated brass;
Center Contact: male: gold-plated brass; female:
gold-plated beryllium copper (except as noted);
Dieletric: PTFE.
3288
www.pomonaelectronics.com
Model# Type
3287
1.46in
(37.08mm)
Special Features
BNC (m)/UHF (f) Phos. Bronze
Contact
Nonconstant
Impedance
BNC (f)/UHF (m) Nonconstant
Impedance
Rating: Hands free testing in controlled voltage
environment: 335 Vrms*, -85 to +325˚F
(-65 to +165˚C) (except as noted).
Impedance: 50Ω (except as noted).
UHF: Shell: tarnish resistant nickel-plated brass;
Center Contact: male: gold-plated brass; female:
gold-plated beryllium copper (except as noted);
Dieletric: PTFE.
3286
*see rating message at start of section.
Coaxial – Between Series Adapters
BNC to TNC
1.23in
(31.24mm)
Model#
Type
3844
BNC (f)/TNC (m)
TNC Female/Female
Adapter
Rating: Hands free testing in controlled voltage
environment: 500 Vrms*, -85˚F to + 325˚F
(-65˚C to +165˚C) (except as noted).
1.30in
(33.02mm)
6780
1.25in
(31.75mm)
1.22in
(31.0mm)
6781
5299
1.50in (38.10mm)
5298
1.35in (34.29mm)
6782
Triax
BNC
Triaxial shell is shorted to outer shield
*see rating message at start of section.
1.35in (34.29mm)
5090
Type
6779
6780
6781
6782
BNC (m)/F (f)
BNC (f)/F (f)
F (m)/BNC (f)
BNC (m)/F (m)
Model#
Description
5299
5298
5090
5300
3 Lug Triax (f)/BNC (m) adapter
2 Lug Triax (f)/BNC (m) adapter
BNC (f)/2 Lug Triax (m) adapter
BNC (f)/3 Lug Triax (m) adapter
Triaxial: Body: tarnish resistant nickel-plated
brass; Center Contact: male: gold-plated brass;
female: gold-plated beryllium copper; Outer
Contact: gold-plated beryllium copper; Dieletric:
PTFE.
5300
BNC
Model#
BNC: Shell: tarnish resistant nickel-plated brass;
Center Contact: male: gold-plated brass; female:
gold-plated beryllium copper (except as noted);
Dieletric: PTFE.
Triaxial to BNC
1.37in (34.80mm)
TNC (f/f)
TNC: Body: tarnish resistant nickel-plated brass;
Center Contact: gold-plated beryllium
copper.
BNC to F
6779
4940
Rating: Hands free testing in controlled voltage
environment: 500 Vrms*.
BNC: Shell: tarnish resistant nickel-plated brass;
Center Contact: male: gold-plated brass; female:
gold-plated beryllium copper (except as noted);
Dieletric: PTFE.
1.05in
(26.67mm)
Type
Impedance: 50Ω.
Impedance: 50Ω (except as noted).
1.00in
(25.40mm)
Model#
Traix
www.pomonaelectronics.com
29
Banana Plugs and Jacks
Just need a reliable plug or jack? Making your own test set? Pomona
Electronics’ selection is designed to meet demanding electrical characteristics. Nickel-plated plugs feature brass bodies and one-piece heat-treated
beryllium copper springs with nylon or ABS insulation. Choose Pomona
for the reliable and dependable connections your work demands.
30
Double Banana
Plug with
Wire Guide,
Stackable,
Solderless
1.55in
(39.37mm)
Model# Plating Insulation
MDP-* Nickel
*Std. Colors
ABS
-0 Black, -1 Brown,
-2 Red, -3 Orange,
-4 Yellow, -5 Green,
-6 Blue, -7 Violet
-8 Gray, -9 White
4892-* Gold
ABS
-0 Black, -2 Red
4898-* Nickel Polyphenylene -0 Black, -6 Blue
Sulfide
4914
set screws 8-32 x 0.210in (5.33mm), 100/pk
Double Banana Plug
with Shorting Bar
Banana plugs internally shorted with #18 AWG
wire.
1.55in
(39.37mm)
1.13in
(28.70mm)
X-hole accepts standard banana plug.
0.75in
(19.05mm)
0.75in
(19.05mm) Set screws secure wire. Simplifies cable construction
or component mounting. Accepts cables to 0.22in
(5.59mm) dia. max., (18-22 AWG wire).
x-hole 0.166in
(4.216mm)
Material: Banana Plug/Jack: brass; Spring: heat treated
1.13in
x-hole ø .125in beryllium copper; finish: nickel plating.
(28.70mm) (3.175mm)
Rating: Hands free testing in controlled voltage environment: 5000 Vdc; For CE compliance: not intended for hand
held use at voltages above 33 Vrms/70 Vdc, 15A, +122˚F
(+50˚C) (Model 4898, +302˚F (+150˚C) max.).
Double Banana Plug
with Solder Turret
Terminals
1.55in
(39.37mm)
1.13in
(28.70mm)
Model# MDP-ST
Similar to MDP above except with bright tin
plated solder turrets. Accepts cables to
0.215in (5.46mm) dia. max.
Rating: Hands free testing in controlled voltage
environment: 5000 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 15A, +131˚F (+55˚C) max.
Material: Banana Plug/Jack: brass; Spring:
heat treated beryllium copper; Finish: nickel
plating; Insulation: ABS.
Rating: Hands free testing in controlled voltage
environment: 5000 Vdc; For CE compliance: not
intended for hand held use at voltages above 33
Vrms/70 Vdc, 15A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red, -9 White.
Model# 4914
Set screws 8-32 x 0.210in (5.33mm), 100/pk
Double Banana
Plug, Stackable,
Solderless
Model# 1330-*
Similar to MDP without cable loop.
Features recess for mounting small
components with set screws.
1.55in
(39.37mm)
Material: Banana Plug/Jack: brass; Spring: heat
treated beryllium copper; Finish: nickel plating;
Insulation: polypropylene.
0.75in
(19.05mm)
Model# MDP-S-*
1.13in
(28.70mm)
Color: Black
Model 1330 has setscrews like MDP.
Material: Banana Plug/Jack: brass; Spring:
heat treated beryllium copper; Finish: nickel
plating; Insulation: ABS.
0.75in
(19.05mm) Rating: Hands free testing in controlled voltage
environment: 5000 Vdc; For CE compliance: not
intended for hand held use at voltages above 33
Vrms/70 Vdc, 15A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
Model# 4914
Model# 4914
Set screws 8-32 x 0.210in (5.33mm), 100/pk
Set screws 8-32 x 0.210in (5.33mm), 100/pk.
Double Banana Plug
with Solder Turret
Terminals
1.55in
(39.37mm)
1.13in
(28.70mm)
Model# 1330-ST-*
Similar to Model 1330 above, but features
bright tin plated solder turrets.
Material: Banana Plug/Jack: brass; Spring: heat
treated beryllium copper; Finish: nickel plating;
Insulation: polypropylene.
Rating: Hands free testing in controlled
0.75in
(19.05mm) voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use at
voltages above 33 Vrms/70 Vdc, 15A, +122˚F
(+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
www.pomonaelectronics.com
Single Banana Plug
Splice
Model# 1829-*
Provides rapid method for splicing single
banana plug patch cords.
Rating: Hands free testing in controlled voltage
environment: 5000 Vdc; For CE compliance: not
0.38in
(9.65mm) intended for hand held use at voltages above
33 Vrms/70 Vdc, 15A, +55˚C (+131˚F) max.
1.50in (38.10mm)
*Std. Colors: -0 Black, -2 Red.
Sold in pkgs. of 10.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Banana Plugs and Jacks
Isolated Double Banana
Plug with Four Solder
Terminals
2.13in
(54.10mm)
Triple Banana Plug,
Stackable, Solderless
Use to make your own attenuator, balun or
filter.
0.75in
(19.05mm) Material: Banana Plug/Jack: brass; Spring:
heat treated beryllium copper; Finish: nickel
plating; Insulation: ABS.
1.88in
(47.75mm)
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A,
+131˚F (+55˚C) max.
0.5in (12.7mm)
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A,
+122˚F (+50˚C) max.
1.55in
(39.37mm)
*Std. Colors: -0 Black, -2 Red.
Color: Red.
Isolated Double Banana
Plug with Three Solder
Terminals
2.16in
(54.86mm)
Use to make your own attenuator, balun or
filter.
4mm Safety Banana
Jack to Banana
Plug Adapter
0.5in (12.7mm)
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc, 15A,
+131˚F (+55˚C) max.
Color: Blue.
0.38in
(9.65mm)
Accepts safety-sheathed 4mm banana plug
and adapts to standard banana plug.
Rating: For CE compliance: Not intended
for hand held use at voltages above
33 Vrms/70 Vdc, -10 to +55°C.
*Std. Colors: -0 Black, -2 Red.
Double Banana Plug
Splice
Model# 1823-*
Provides rapid method for splicing cables.
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held
0.75in
use at voltages above 33 Vrms/70 Vdc, 15A,
(19.05mm)
+131˚F (+55˚C) max.
1.13in
(28.70mm)
Isolated Single Banana
Plug with Two Solder
Terminals
Model# 6728
Material: nickel plated brass.
1.85in (47.0mm)
One jack is isolated.
Material: Banana Plug/Jack: brass; Spring:
heat treated beryllium copper; Finish: nickel
0.75in plating; Insulation: polypropylene; Solder
(19.05mm) turrets; bright tin plated.
0.75in
(19.05mm)
1.13in
(28.70mm)
Model# 1837
Model# 2970-*
Use for balanced line 2 conductor shielded
cable assemblies. Accepts cables to 0.250in
(6.35mm) dia. max., Setscrews secure
wires.
Jacks are isolated from plugs.
Material: Banana Plug/Jack: brass; Spring:
heat treated beryllium, bopper; Finish: nickel
0.75in
(19.05mm) plating; Insulation: polypropylene; Solder
turrets; bright tin plated.
0.75in
(19.05mm)
1.13in
(28.70mm)
Model# MDP-X
Model# 1390-*
*Std. Colors: -0 Black, -2 Red.
Ideal for computers, lab circuit design and
testing.
1.50in
(38.10mm)
Jack is isolated from plug.
0.5in
(12.7mm)
2.13in (54.10mm)
Material: Banana Plug/Jack: brass; Spring:
heat treated beryllium copper; Finish: nickel
plating; Insulation: polypropylene; Solder
turrets; bright tin plated.
Single Banana Plug
Splice
Provides rapid method for splicing single
banana plug patch cords.
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A,
+131˚F (+55˚C) max.
*Std. Colors: -0 Black, -2 Red.
Model# 1829-*
0.38in
(9.65mm)
1.50in (38.10mm)
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A,
+55˚C (+131˚F) max.
*Std. Colors: -0 Black, -2 Red.
QUAD Stacking Plug
0.38in
(9.65mm)
0.5in (12.7mm)
Model# 3364-*
Features one in-line stacking and three
cross-stacking connections.
Insulated Double Banana
Plug Shorting Bar
All jacks are connected to plug.
2.65in (67.31mm)
1.35in
(34.29mm)
Material: Banana Plug/Jack: brass; Spring:
heat treated beryllium copper; Finish: nickel
plating; Insulation: ABS.
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A,
+122˚F (+50˚C) Max.
*Std. Colors: -0 Black, -2 Red.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Model# 5145
Shorting bar is completely insulated in clear
ABS thermoplastic.
Fits standard 0.166in (4.22mm) dia. banana
jack.
Material: Banana Plug Body: brass; Spring:
beryllium copper; Finish: nickel plating.
0.99in
(25.15mm)
Rating: 15A, +122˚F (+50˚C) max.,
resistance less than 1.5mΩ.
0.75in (19.05mm)
www.pomonaelectronics.com
31
Banana Plugs and Jacks
32
Do-It-Yourself 4mm
Stackable Banana Plug,
Solder
Model# 6721To come....
Build your own safety stacking leads with
do-it-yourself safety-sheathed 4mm stackable banana plugs.
2.3in (58.4mm)
Do-It-Yourself
Retractable
Sheath Banana Plug
2.56in (65.02mm)
Material: Contacts: nickel-plated brass,
Insulation: lucel acetal polymer.
3.01in (76.45mm)
1.44in
(36.58mm)
Black
Red
Do-It-Yourself Retractable Sheath Banana
Plugs provide fast simple assembly and
reliable performance.
Rating: Hands free testing in controlled
voltage environment: 1000 Vrms, 20A,
≤ 2 mΩ.
*Std. Colors: -0 Black, -2 Red.
Do-It-Yourself In-Line Sheathed
(4mm) Banana Plug and Jack
Color
122505A
122506A
Rating: For CE CAT II 300V, 15OV CAT III.
Rating: IEC1010 1000V Category III**,
20A, 14 to 176°F (-10 to +95°C).
** When plug is correctly assembled and
terminated.
Model#
Accepts 18-22 AWG wire.
0.39in
(9.90mm)
Model#
Safety-rated plugs and jacks for use with any wire from
22 to 18 AWG with flexible insulation.
6383-*
6383-02
6384-*
6384-02
Attaches to wire by crimp or soldering.
Plugs fit most sheathed DMM jacks and DMM test leads to
make up your own banana plug or jack test lead or jumper.
Plug
Jack
See mating panel jacks (6387 on page 32).
6383
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Insulation: Santoprene®.
Rating: CAT II 300V, 15A, +275°F (+135°C) max.
*Std. Colors: -0 Black, -2 Red, -02 Black and Red (2 per pkg).
6384
*Sold in pkgs of 10.
Do-It-Yourself Solderless Stackup
Banana Plug with Safety Shield
Internal set screw holds wire firmly.
Model# Plating
Insulation
1825-* Nickel
ABS
Safety collar insulates exposed wire leads.
0.16in (4.06mm)
Max. insulation dia.
Accepts standard banana plug and fits 0.166in (4.22mm)
dia. banana jack.
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper.
0.78in
(19.81mm)
Rating: Hands free testing in controlled voltage environment: 5000 Vdc; For CE compliance: not intended for hand
held use at voltages above 33 Vrms/70 Vdc, 15A, +122˚F
(+50˚C) max. (Model 4899, +302˚F (+150˚C) max.).
1.55in (39.37mm)
0.44in
(11.17mm)
4897
4899
Gold
Nickel
6545
Nickel
Std. Colors
-0 Black, -1 Brown,
-2 Red, -3 Orange,
-4 Yellow, -5 Green,
-6 Blue, -7 Violet,
-8 Gray, -9 White.
Sold in pkgs of 10
ABS
-0 Black, -2 Red
Polyphenylene -0 Black, -6 Blue
Sulfide
Sold in pkgs of 10
ABS
Pkg of 1 ea. of
all 10 colors
Accepts 18-22 AWG wire.
Do-It-Yourself Solderless Stackup
Banana Plug
4914 set screws 8-32 x 0.210 (5.33mm), 100/pk.
Model# Plating
Insulation
1325-* Nickel
ABS
Internal set screw holds wire firmly.
1.55in
(39.37mm)
Accepts standard banana plug, fits standard 0.166in
(4.22mm) dia. banana jack.
0.44in
(11.18mm)
x-hole 0.125in
(3.17mm)
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper.
5406
5230
Gold
Nickel
Rating: Hands free testing in controlled voltage environment: 5000 Vdc; For CE compliance: not intended for hand
held use at voltages above 33 Vrms/70 Vdc, 15A, +122˚F
(+50˚C) max. (Model 5230, +302˚F (+150˚C) max.).
6546
Nickel
Std. Colors
-0 Black, -1 Brown,
-2 Red, -3 Orange,
4 Yellow, -5 Green,
-6 Blue, -7 Violet,
-8 Gray, -9 White.
ABS
-0 Black, -2 Red
Polyphenylene -0 Black, -6 Blue
Sulfide
ABS
Pkg. of 1 ea. of
all 10 colors
*Sold in pkgs of 10.
Accepts 18-22 AWG wire.
Do-It-Yourself 4mm Right
Angle Banana Plug
1.28in
(32.4mm)
Model# 6729
Build your own safety leads with do-it-yourself safety-sheathed 4mm right angle banana
plug.
Material: Contacts: nickel-plated brass;
Insulation: lucel acetal polymer.
Rating: IEC1010 1000V Category III**,
20A, 14 to 176°F (-10 to +55°C).
*Std. Colors: -0 Black, -2 red.
** When plug is correctly assembled and
terminated.
www.pomonaelectronics.com
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Banana Plugs and Jacks
Do-It-Yourself
In-Line Sheathed
Banana Plug/
Banana Jack
1.06in
(26.92mm)
1.55in
(14.99mm)
Accepts
Model# wire AWG
Wire
Access Hole
4933-* 22, 20, 18
0.159in
(4.04mm) Dia.
0.200in
(50.8mm) Dia.
0.159in
(4.04mm) Dia.
0.200in
(50.8mm) Dia.
4986-* 16, 14
4934-* 22, 20, 18
4987-* 16, 14
Description
Plug
Plug
4933/4986 Plugs
4934/4982 Jacks
0.56in
(14.22mm)
0.188in
(4.78mm)
0.135in (3.43mm)
Banana Plug with
Threaded Stud and
Solder Lug
0.16in
(4.06mm)
Thread
Insulated Banana
Plug and Jack
with Flexible Boot,
Solder or Crimp
Model#
Accepts wire
AWG
5169-*
5170-*
5167-*
5168-*
22, 20, 18
16, 14
22, 20, 18
16, 14
Jack
Jack 5167
Jack 5168
Plug 5169
Plug 5170
0.56in
(14.22mm)
Fits standard 0.166in (4.22mm) dia. banana
jack.
Material: Boot: Banana Plug Body: brass;
Spring: beryllium copper; Finish: nickel
plating; Jack: nickel plated brass.
5167/5168 Jacks
Banana Plug with Screw
and Soldering Lug
Model#
Thread
3263
3264
4512
6-32 x .50in (12.70mm)
8-32 x .50in (12.70mm)
8-32 x .63in (16.00mm)
Fits standard 0.166in (4.22mm) dia.
banana jack.
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A.
Model#
Thread
3265
3266
6-32 x 0.25in (6.35mm)
8-32 x 0.25in (6.35mm)
0.97in (24.63mm)
Fits standard 0.166in (4.22mm) dia.
banana jack.
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A,
+122˚F (+50˚C,) max.
*Std. Colors: -0 Black, -2 Red.
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A.
Sold unassembled, in pkgs. of 10.
Ideal for making patch cords or field repairs.
Snap-on flexible PVC boot allows wire to be
crimped or soldered to banana plug or jack.
5169/5170 Boots
Fits standard 0.166in (4.22mm) dia.
banana jack.
Material: Banana Plug Body: brass; Spring:
beryllium copper; Finish: nickel plating.
Mates with...
Plug
Excellent for riveting to panels or boards.
Solder turret for rapid attachment of wires.
Sold in pkgs. of 10.
Material: Banana Plug/Jack: brass; Spring: beryllium
copper; Insulation: nylon.
*Std. Colors: -0 Black, -2 Red.
33
Model# 3261
Material: Banana Plug Body: brass; Spring:
beryllium copper; Finish: nickel plating.
Jack
Rating: Hands free testing in controlled voltage
environment: 1200V ac/dc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 15A, +176˚F (+80˚C) max.
0.28in (7.11mm)
0.16in
(4.06mm)
0.135in
(3.43mm)
Jack
These plugs and jacks are designed to fit together and
provide protection from accidental shorting.
0.36in (9.14mm)
Rivet Type Banana Plug
with Turret
Material: Banana Plug Body: brass; Spring:
beryllium copper; Finish: nickel plating.
0.56in
(14.22mm)
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A.
Sold unassembled, in pkgs. of 10.
Rivet Type Banana Plug
Model#
3257
0.16in
(4.06mm)
Rivet
I.D. - 0.14in (3.56mm)
O.D.- 0.25in (6.35mm)
3258
“X”
Panel
0.094in
(2.39mm)
0.125
(3.17mm)
0.062in
(1.57mm)
0.093in
(2.36mm)
4mm Banana Plug with
Threaded M3 Stud
4mm plug with threaded M3 stud, 2 nuts;
12mm (0.5in) stud length.
Excellent for riveting to panels or boards.
Fits standard 0.166in (4.22mm) dia.
banana jack.
x
0.135in (3.43mm)
1.34in (34mm)
Sold unassembled, in pkgs. of 10.
Material: Banana Plug Body: brass; Spring:
beryllium copper; Finish: nickel plating.
0.56in
(14.22mm)
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held
juse at voltages above 33 Vrms/70 Vdc, 15A.
Model# 72918
0.75in
(19mm)
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 36A.
Sold in pkgs. of 10.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
www.pomonaelectronics.com
Banana Plugs and Jacks
34
Panel Mt IEC1010
Banana Jacks for
Sheathed Plugs
1.34in (34mm)
Model#
Color
72912-0
72912-2
72913-0
72913-2
72930*
Black
Red
Black
Red
Terminal
Threaded Stud
Terminal Strip Adapter,
4mm Safety Banana
Jack to 6/32
Solder Tab
1.56in (39.62mm)
Threaded Stud,
Hexagonal Nut
Rating: 1000V Cat III, 36A Max.
72913
Material: Contacts: nickel-plated brass,
Insulation: lucel acetal polymer.
*Std. Colors: -0 Black, -2 Red.
*Std. Colors: -0 Black, -1 Brown, -2 Red,
-4 Yellow, -5 Green, -6 Blue, -7 Violet,
-8 Gray, -9 White.
Sold in packages of 10 per color.
Easily connect your DMM safety sheathed
test leads to terminal strips via this handy
6/32 thread adapter.
Rating: For CE compliance: not intended
for hand held use at voltages above
33 Vrms/70 Vdc, (14 to 212°F) -10 to
+100°C.
Material: Gold-plated nickel
(72912 and 72913).
72912
Model# 6720
Panel Mount Banana
Jacks for Sheathed
Plugs
50 x 28 thread
Model#
Std. Colors
6387-BC-G-* -0 Black, -2 Red, -9 White
6387-ST-T-* -0 Black, -2 Red
6387-TS8-N-* -0 Black, -2 Red
These banana jacks fit most DMM plugs and
all sheathed Pomona plugs. Available with
several different terminals. Threaded and
press-in style.
72930
Rating: Designed to meet IEC1010 CAT III
1000 Vrms., 15A.
Panel Cut-Out
Panel Mount Banana
Jacks with Mounting
Base
1.38in
(35.05mm)
Model#
Mounting Base
2269-*
5233-0
4601-*
Double
Double High-Temp
Triple
Mounts in panels from 0.063in (1.60mm) to
0.375in (9.53mm) thick. One black, one red.
Triple has green.
1.22in
(31.0mm)
0.75in
(19.05mm)
Typical
2.13in
(54.10mm)
Comes with Hex Nut and Lock Washer.
6387-T-P -C
*Mounting base color: -0 Black, -2 Red.
Replacement hex nuts available on page 36.
Color Options:
-0 Black, -2 Red, -9 White.
Plating Options: T=Tin, G =Gold, N = Nickel
BC
ST
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A.
Temp: +239F (+115°C) [5233-0: +220°F
(+428°C)].
Sold in packages of 10.
TS8
8-32
UNC-2A
THD
Terminal Type:
Panel Mount IEC1010
4 mm (0.16in) Banana
Jack for Sheathed Plugs
Replacement hex nuts available on page 36.
BC = Bifurcated Cup
ST = Solder Turret
TS8 =Threaded Stud #8-32
Model# 5931-*
Accepts flexible test lead sets 5907A, 5908A,
5909A available on page 68.
Max. Panel Thickness: 0.28in (7.0mm).
Insulation: Nylon.
0.57in
(14.5mm)
1.22in
(31.0mm)
Rating: 1000 V Cat III per IEC61010-031 and
IEC61010-1, 25A.
Panel Cut-Out
1.04in (26.4mm)
*Std. Colors: -0 Black, -2 Red, -6 Blue,
-9 White.
Sold in pkgs. of 10 per color.
0.75in (19.05mm)
Typical
Panel Cut-Out
Panel Mount Banana Jack
Model#
Plating
Insulation
Std. Colors
1581-*
Bright tin
Polycarbonate
2854-*
Gold
Polycarbonate
4900-*
Bright tin
Polyphenylene
Sulfide
-0 Black, -1 Brown, -2 Red, -3 Orange,
-4 Yellow, -5 Green, -6 Blue, -7 Violet,
-8 Gray, -9 White
-0 Black, -1 Brown, -2 Red, -4 Yellow,
-5 Green, -6 Blue, -8 Gray, -9 White
-0 Black, -6 Blue
1.22in (31.00mm)
0.375in
(9.52mm)
1/4-32 thread
0.35in
(88.90mm)
Panel Cut-Out
Mounts in panels ranging in thickness from
0.063in (1.60mm) to 0.375in (9.53mm).
Material: Brass.
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held use
www.pomonaelectronics.com
at voltages above 33 Vrms/70 Vdc, 15A,
+239˚F (+115˚C) max. (Model 4900, +428˚F
(+220˚C) max.).
Mounting Bases and replacement hex nuts
available on page 36.
Sold in pkgs. of 10 per color.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Banana Plugs and Jacks
Uninsulated Banana
Jack
Model# 3267
Fits standard banana plug.
1/4-32
thread
0.094in
(2.39mm)
Model# Material
0.98in (25.89mm)
Max. open
3750-* Gold-plated brass
3760-* Bright tin-plated brass
3770-* Gold-plated tellurium copper
0.80in
(20.32mm)
Material: nickel-plated brass.
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A.
Panel Cut-Out
Insulation: Polycarbonate.
0.375in
(9.52mm)
Replacement hex nuts available on page 36.
x-hole 0.100in
(0.254mm)
5/16in
(7.92mm) Hex.
0.50in
(12.7mm)
0.35in
(88.90mm)
Panel Cut-Out
Banana Jack with Wire
Wrap Terminal
0.45in
(11.43mm)
1.22in (30.99mm)
.025in square pin 0.375in
(9.52mm)
0.25in
(6.35mm)
Material: Jack: nickel-plated brass;
Terminal: gold-plated phosphor bronze;
Insulation: polycarbonate.
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 3A,
+239˚F (+115˚C) max.
Hex Head Binding Post
0.91in (23.11mm)
x-hole 0.100in
(0.254mm)
*Std. Colors: 3750 and 3760:
all 10 colors. 3770: -0 Black, -2 Red.
Sold unassembled.
Model# 5018-*
Meets MIL-P-55149/1A.
Material: Binding Post Body, Nuts,
Lockwasher: gold-plated brass;
Insulation: Nylon MIL-P-20693.
0.58in
(14.73mm) Rating: Hands free testing in
controlled voltage environment:
1500 Vrms; For CE compliance: not
1.19in (30.22mm) open
intended for hand held use at voltages
above 33 Vrms/70 Vdc, 30A, +176˚
0.54in
0.490in (12.45mm)
(+80˚C) max.
(13.71mm)
Sold in pkgs. of 10 per color.
0.35in
(88.90mm)
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
15A, +239˚F (+115˚C) max.
Model# 4005-*
*Std. Colors: -0 Black, -2 Red.
0.50in
(12.7mm)
35
Binding Posts
Replacement hex nuts available on page 36.
Panel Cut-Out
*Std. Colors: -0 Black, -2 Red,
-4 Yellow, -5 Green, -6 Blue, -9 White.
0.458in
(11.63mm)
Panel Cut-Out
Terminal Strip
Banana Jack
Adapter
5/16in
(7.92mm)Hex.
0.80in
(20.32mm)
X
Torque
Model# Thread Vrms In/Lb
5699-*
5700-*
5701-*
6-32
8-32
10-32
1100
1600
1700
X Stud
Length
7 0.25in (6.35mm)
16 0.32in (8.13mm)
25 0.32in (8.13mm)
This adapter provides a banana jack connection by
replacing the screw in a terminal strip. Secure connections can be made with standard banana plug patch
cords without breaking the connection to the terminal
strip. Banana jack 0.166in (4.22mm) dia.
Binding Post with Wire
Wrap Terminal
Model# 4098-*
Accepts standard banana plugs and
0.85in
0.45in
(21.59mm) (11.43mm) 0.080in (2.03mm) pin tips, wires and
probe tips in 0.100in (2.54mm)
cross-hole.
.025in Material: Binding Post: nickel-plated
square pin brass; Terminal: gold-plated phosphor
bronze; Insulation: polycarbonate.
2.25in (57.15mm) open
Rating: Hands free testing in controlled
x-hole 0.100in
(0.254mm)
Material: Banana Jack: nickel-plated brass; Insulation:
Nylon.
*Std. Colors: -0 Black, -2 Red, -3 Orange, -4 Yellow,
-9 White.
0.44in (11.18mm)
Ratings: Hands free testing in controlled voltage
environment: (see chart for Vrms for each model#);
For CE compliance: not intended for hand held use at
voltages above 33 Vrms/70 Vdc, 25A, +216°F
(+102°C) max.
0.375in
(9.52mm)
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
3A, +239˚F (+115˚C) max.
*Std. Colors: -0 Black, -2 Red.
0.35in
(88.90mm)
Panel Cut-Out
Binding Post / Banana Jack Mounting Bases
B
B
C
C
A
A
For binding post models 3750, 3760, 3770
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Model# Type
Used with
3862-*
3863-*
4619-*
4614-*
4654-*
4590-*
Standard
Binding Posts
Miniature
Banana Jacks
Standard
Banana Jacks
Double
Triple
Double
Triple
Double
Triple
A
B
C
1.19in (30.22mm)
1.94in (49.28mm)
0.87in (22.09mm)
1.38in (35.05mm)
1.38in (35.05mm)
2.13in (54.10mm)
0.75in (19.05mm)
0.75in (19.05mm)
0.50in (12.70mm)
0.50in (12.70mm)
0.75in (19.05mm)
0.75in (19.05mm)
0.44in (11.18mm)
0.44in (11.18mm)
0.38in (9.65mm)
0.38in (9.65mm)
0.63in (16.00mm)
0.63in (16.00mm)
Mount banana jacks and binding posts at standard
0.75in (19.05mm) spacing.
Rating: +239˚F (+115˚C) Max.
Material: polycarbonate
Sold in pkgs. of 10.
*Std. Colors: -0 Black.
www.pomonaelectronics.com
Banana Plugs and Jacks
36
Spring Loaded
Binding Post
Dual Binding Posts
Model# 4995-*
1.98in (50.37mm)
Meets MIL-P-55149/8.
.0925in
(2.35mm)
Silicone rubber O-rings provide water
resistant seal when mounted in panels
from 0.062in to 0.125in (15.75mm to
3.18mm) thick.
0.89in (22.60mm)
0.58in
(14.73mm)
0.75in
(19.6mm)
Material: Nickel-plated brass.
*Std. Colors: -0 Black, -2 Red.
Base
6883
6884
Standard
Raised Base
5-way binding post with 3.91 mm (0.154
in) cross-hole that accepts up to 12 AWG
wire and standard banana plugs. Posts
are spaced at the standard 3/4 inch spacing to mate to dual banana plugs.
Material: Binding Post: nickel-plated
brass. Insulators: nylon.
6883
2.00in (50.8mm)
Model#
Rating: 30A current.
1.98in (50.37mm)
0.24in
(6.10mm)
Panel Cut-Out
Spring Loaded
Binding Post
Model# 4770-*
0.75in
(19.6mm)
Mounts in panels from 0.06in (1.6mm)
to 0.38in (9.53mm) thick.
0.80in
(20.32mm)
Accepts wires or plugs up to 0.08in
(2.16mm) dia. with insulation up to
0.53in
0.16in (4.06mm).
(13.46mm)
Material: Body: tin plated brass;
Insulation: polycarbonate.
1.9in (48.26mm)
Rating: Hands free testing in controlled
voltage environment: 630 Vdc; For CE
compliance: not intended for hand held
use at voltages above 30 Vac/60 Vdc,
15A, +239˚F (+115˚C) max.
6884
Panel Cut-Out
for 6883/6884
Shorting Link for
Standard Binding Posts
Model# 4115
Solid shorting link for binding posts.
1.03in (26.16mm)
Model# Qty.
Finish
Wrench
Size
6549
6547
6440
6548
6441
6389
Nickel
Nickel
Nickel
Gold
Nickel
Nickel
3/16in
1/4in
1/4in
3/8in
3/8in
9/16in
500
500
500
100
500
100
Sold in pkgs. of 10.
Fits Binding Posts on 0.750in
(19.05mm) centers.
Nut
Thickness
Thread
0.65in (16.51mm)
0.95in (24.13mm)
0.95in (24.13mm)
0.95in (24.13mm)
0.95in (24.13mm)
0.95in (24.13mm)
4-40
6-32
8-32
10-32
1/4-32
1/2-28
Hex Nut Application Chart
Hex Nut
6549
6547
Fits on
3276
4513
3263
4511
6271
6387-TS6
Binding Post with
Double Mounting
6440
2142
2143
2382
2383
2439
2440
3264
3542
3750
3760
3770
4022
4098
4243
4512
4543
4773
6272
6387-TS8
6548
6441
6389
5018
1581
2269
2854
3267
4005
4069
4601
4900
5233
6270
4921
6387
Model# 4243-*
Accepts standard banana plugs and 0.080in
(2.03mm) pin tips, wires and probe tips in
0.10in (2.54mm) cross-hole.
0.75in
(19.05mm)
0.65in
(16.51mm)
0.25in (6.35mm)
0.19in
(4.82mm)
0.43in (10.92mm)
Miniature Double
Banana Plug
with Set Screws,
Stackable, Solderless
0.50in
(12.7mm)
0.75in
(19.05mm)
1.11in
(28.19mm)
*Mtg. Base Colors: -0 Black, -2 Red.
Internal set screws secure cable up to
0.15in (3.81mm) dia. or components.
Plugs fit miniature 0.104in (2.64mm)
dia. jacks.
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
Miniature Solderless
TypeTriple Banana
Plug with Wire Guide
0.50in (12.7mm)typical
One black and one red binding post.
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A,
+239˚F (+115˚C) max.
Model# 2244-*
Material: Banana Plug/Jack: brass;
Spring: beryllium copper; Finish: gold
plating; Insulation: ABS
Material: Binding Post: bright tin-plated
brass; Insulation: polycarbonate.
0.80in
0.98in
(24.89mm) (20.32mm)
Material: nickel-plated brass.
Rating: 15A.
*Std. Colors: -0 Black, -2 Red.
Replacement
Hex Nuts
0.75in
(19mm)
Model# 4653-0
Use for balanced line 2 conductor
shielded cable assemblies.
Material: Banana Plug/Jack: brass;
Spring: beryllium copper; Finish: gold
plating; Insulation: ABS.
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70
Vdc,5A, +122˚F (+50˚C) max.
1.26in
(32.00mm)
Cable strain relief I.D. 0.19in (4.82mm).
1.11in
(28.19mm)
Setscrews secure wires.
Panel Cut-Out
www.pomonaelectronics.com
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Banana Plugs and Jacks
Miniature Solder
Type Banana Plug
Model#
Insulator Length (X)
3690-*
4617-*
0.45in (11.43mm)
1.00in (25.14mm)
Miniature Double
Banana Plug with
Shorting Bar
0.19in (4.83mm)
0.50in
(12.7mm)
Sold in pkgs. of 10
Material: Banana Plug Body: brass; Spring: beryllium copper; Finish: gold plating; Insulation: nylon.
0.44in
(11.18mm)
X
Rating: Hands free testing in controlled voltage
environment: 2500 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 5A, +176˚F (+80˚C) max.
Miniature Banana
Plug with Threaded
Stud
Model#
X Length
3276
4513
0.230in (5.84mm)
0.480in (12.19mm)
Furnished with 4-40 hex nut, 4-40 threaded stud.
Material: Banana Plug Body: brass; Spring:
beryllium copper; Finish: gold plating.
X
0.15in
(3.81mm)
0.09in
(2.29mm)
Material: Banana Plug/Jack: brass; Spring: beryllium copper; Finish: gold plating; Insulation: ABS.
Rating: Hands free testing in controlled voltage
environment: 2500 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 5A, +122˚F (+50˚C) max.
1.10in
(25.40mm)
*Std. Colors: -0 Black, -2 Red.
Miniature Double
Banana Plug
Shorting Bar
Model# 3030
Center hole accepts 4-40 screw.
Material: Banana Plug Body: brass; Spring:
beryllium copper; Finish: gold plating.
0.75in
(19.05mm)
Fits miniature 0.104in (2.64mm) dia. banana
jacks.
Rating: 5A. Resistance less than 1.5 mΩ.
Fits Miniature Binding Posts and Miniature Banana
Jacks on 0.5in (12.70mm) centers.
0.75in
(19.05mm)
Rating: Hands free testing in controlled voltage
environment: 2500 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 5A.
Plugs fit miniature 0.104in (2.64mm) dia.
banana jacks.
Banana plugs internally shorted with 18 AWG wire.
0.75in
(19.05mm)
*Std. Colors: -0 Black, -2 Red.
37
Model# 2035-*
0.50in
(12.70mm)
Replacement hex nut available on page 36.
Sold unassembled, in pkgs. of 10.
Miniature Rivet Type
Banana Plug
0.10in
(2.54mm)
Do-It-Yourself
Miniature Banana
Plug, Stackable,
Solderless
Model# 2944-*
Fits miniature 0.104in (2.64mm) dia. banana jacks.
0.16in
(4.06mm)
Wire firmly held in place with internal set screw.
1.11in
(28.19mm)
Rating: Hands free testing in controlled voltage
environment: 2500 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 5A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
Do-It-Yourself
Miniature Banana
Plug with Safety
Shield, Stackable,
Solderless
1.11in
(28.19mm)
0.31in
(2.87mm)
0.086in
(2.18mm) I.D.
Model# 2945-*
Fits miniature 0.104in (2.64mm) dia. banana jacks.
Wire firmly held in place with internal set screw.
Material: Banana Plug/Jack: brass; Spring: beryllium copper; Finish: gold plating; Insulation: ABS
Panel
X Dim.
0.062in (1.57mm)
0.093in (2.36mm)
0.125in (3.17mm)
0.062in (1.57mm)
0.094in (2.39mm)
0.125in (3.17mm)
0.156in (3.96mm)
0.105in (2.67mm)
Material: Banana Plug Body: brass; Spring:
beryllium copper; Finish: gold plating.
Rating: Hands free testing in controlled voltage
environment: 2500 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 5A.
0.12in
(3.05mm)
X
0.09in
(2.29mm)
Miniature Binding
Post
0.38in
(9.65mm)
x-hole 0.086in
(0.2.18mm)
Sold in pkgs. of 10.
Model#
Plating
2382-*
2439-*
Gold
Tin
Accepts miniature banana plug.
8-32 hex nut and lockwasher included.
Rating: Hands free testing in controlled voltage
environment: 2500 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 5A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
3268
3271
3272
3273
Fits miniature 0.104in (2.64mm) dia. banana jacks.
0.09in
(2.29mm)
X
Material: Banana Plug/Jack: brass; Spring: beryllium copper; Finish: gold plating; Insulation: ABS.
0.31in
(2.87mm)
Model#
Material: Binding Post Body, Nut: brass;
Lockwasher: steel; Insulation: polycarbonate.
0.75in
(19.05mm)
open
0.63in
(16.00mm)
open
Rating: Hands free testing in controlled voltage
environment: 1500 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 5A, +239˚F (+115˚C) max.
*Std. Colors: -0 Black, -2 Red,
-3 Orange, -5 Green, -6 Blue, -9 White.
Replacement hex nuts available on page 36.
Panel Cut-Out
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
www.pomonaelectronics.com
Banana Plugs and Jacks
38
Miniature Insulated
Binding Post with Double
Mounting Base
x-hole 0.086in (0.2.18mm)
Model#
Plating
2383-*
2440-*
Gold
Tin
Miniature Banana Jack
with Wire Wrap Terminal
Accepts miniature banana plugs.
0.45in
0.74in
Mounts in panels up to 0.250in (6.35mm)
(18.80mm) (11.43mm) thick.
Accepts miniature banana plugs.
Material: Jack: nickel-plated brass;
Terminal: gold-plated phosphor bronze;
Insulation: polycarbonate.
8-32 hex nut and lockwasher included.
Material: Binding Post Body, Nut:
0.50in
(12.70mm) brass; Lockwasher: steel; Insulation:
polycarbonate.
0.86in
(21.84mm)
0.75in (19.05mm)
Max. open
0.63in (16.00mm)
0.31in
(7.87mm)
0.250in (6.35mm)
*Std. Colors: -0 Black, -2 Red.
Sold unassembled, in pkgs. of 10.
0.234in
(59.44mm)
*Std. Colors: 2383: -0 Black, -2 Red.
2440: -0 Black.
Panel Cut-Out
Replacement hex nuts available on
page 36.
Panel Cut-Out
Do-It-Yourself Pin Tip
Plug with Safety Shield,
Stackable, Solderless
0.08in (2.03mm) pin
1.31in (33.27mm)
0.31in
(2.87mm)
0.086in
(2.18mm) I.D.
Rating: Hands free testing in controlled
voltage environment: 1500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 3A,
+239˚F (+115˚C) max.
1.33in
(33.78mm)
Rating: Hands free testing in controlled
voltage environment: 1500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +239˚F (115˚C) max.
*Mounting Base Colors: -0 Black,
-2 Red.
Model# 4022-*
0.50in
(12.70mm)
Model# 3548-*
Accepts miniature banana plug.
Miniature Rivet Type
Banana Jack with
Turret
Material: Pin Tip Plug/Jack: goldplated brass; Insulation: ABS.
Rating: Hands free testing in controlled
voltage environment: 3000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +122˚F (+50˚C) max.
Accepts miniature banana plugs.
Mounts in panels up to 0.062in (1.57mm)
thick.
0.50in
(12.70mm)
Wire firmly held in place with internal
set screw.
Model# 3277
Material: Gold-plated brass.
0.14in
(3.56mm)
0.105n
(2.67mm)
0.34in
(8.64mm)
Rating: Hands free testing in controlled
voltage environment: 1500 Vdc;
For CE compliance: not intended for
hand held use at voltages above
33 Vrms/70 Vdc, 5A.
Sold in pkgs. of 10.
Rec. Mounting Hole: .140 ± .002
(9/64 Drill).
*Std. Colors: -0 Black, -2 Red.
Panel Thickness: 0.062in (1.57mm)
Miniature Banana
Jack, Panel Mount
0.72in
(18.29mm)
Model# 2142-*
Accepts miniature banana plugs.Mounts
in panels up to 0.250in (6.35mm) thick.
Material: gold-plated brass; Insulation:
polycarbonate.
0.31in
(7.87mm)
0.88in
(22.35mm)
0.250in (6.35mm)
Rating: Hands free testing in controlled
voltage environment: 1500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +239˚F (+115˚C) max.
*Std. Colors: Available in 10 colors.
Miniature Banana Jack
in Double Mounting
Base, Panel Mount
0.88in (22.35mm)
Panel Cut-Out
0.87in
(22.10mm)
Material: gold-plated brass; Insulation:
polycarbonate.
*Std. Mounting Base Colors: -0 Black,
-2 Red.
Replacement hex nuts available on
page 36.
Sold unassembled, in pkgs. of 10 per
color.
Accepts miniature banana plugs. Mounts
in panels up to 0.188in (4.78mm) thick.
Rating: Hands free testing in controlled
voltage environment: 1500 Vdc; For CE
compliance: not intended for hand held
0.50in
(12.70mm) use at voltages above 33 Vrms/70 Vdc, 5A,
+239˚F (+115˚C) max.
Uses hex nut 6440.
0.234in
(59.44mm)
Model# 2143-*
0.60in
(15.24mm)
Colors: One black and one red jack.
Panel Cut-Out
www.pomonaelectronics.com
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Banana Plugs and Jacks
Double Pin Tip Plug
with Shorting Bar
0.50in
(12.7mm)
Insulated Pin Jack with
Wire Wrap Terminal
Model# 3452-*
Accepts pin tip plugs. Internally shorted
with 20 AWG wire. Use as connecting link
for 0.50in (12.70mm) spaced pin tip jacks.
Material: Pin Tip Plug/Jack: brass;
Spring: beryllium copper; Finish: gold
plating; Insulation: ABS.
0.75in
(19.05mm)
0.45in
0.74in
(18.80mm) (11.43mm)
0.250in (6.35mm)
*Std. Colors: -0 Black, -2 Red, -6 Blue,
-9 White.
0.234in
(59.44mm)
Model#
Accepts Wire AWG
5173-*
22, 20,18
Ideal for making patch cords or field repairs.
Snap-on flexible PVC boot allows wire to
be crimped or soldered to pin tip plug.
Material: nickel-plated brass.
Accepts 18-22 AWG wire.
1.50in
(38.10mm)
0.35in
(8.89mm)
Rating: Hands free testing in controlled
voltage environment: 3000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc, 5A,
+122˚F (+50˚C) max.
Panel Cut-Out
Double Banana Jack to
Miniature Double
Banana Plug
0.75in
(19.05mm)
1.13in
(28.70mm)
Model# 2952
Converts standard banana plugs to
miniature.
Material: Jack: nickel-plated brass;
Spring: nickel-plated beryllium copper;
Insulation: ABS.
0.50in
(12.70mm) Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +122˚F (+50˚ C) max.
*Std. Colors: Available in 10 colors.
Pin Tip Jacks with
Double Mounting Base
Max. panel thickness 0.25in (6.35mm).
Rating: Hands free testing in controlled
voltage environment: 1500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
3A, +239˚F (+115˚C) max.
1.33in
(33.78mm)
*Std. Colors: -0 Black, -2 Red.
Do-It-Yourself .080in
(20.32mm) Dia. Pin Tip
Plug with Flexible Boot,
Solder or Crimp
Accepts 0.080in (2.03mm) dia. pin.
Material: Jack: nickel-plated brass;
Spring: gold-plated beryllium copper;
Terminal: gold-plated phosphor bronze;
Insulation: polycarbonate.
0.31in
(7.87mm)
Rating: Hands free testing in controlled
voltage environment: 3000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 5A,
+239˚F (+115˚C) max.
1.20in
(30.48mm)
Model# 4773-*
1.25in
(31.75mm)
Color: Black.
Model# 4543-*
Accepts 0.08in (2.03mm) dia. pin.
0.88in (22.35mm)
Max. panel thickness 0.188in (4.78mm).
Material: Jack: gold-plated brass;
Spring: beryllium copper; Insulation: polycarbonate.
0.87in
(22.10mm)
0.50in
(12.70mm)
0.60in
(15.24mm)
Banana Jack to
Miniature Banana Plug
Use to mate standard 0.166in (4.22mm)
dia. banana plug to equipment having
miniature banana jacks.
0.30in (7.62mm)
Rating: Hands free testing in controlled
voltage environment: 1500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 5A,
+239˚F (115˚C) max.
Model# 2138-*
Material: Jack: nickel-plated brass;
Spring: nickel-plated beryllium copper;
Insulation: ABS.
1.33in
(33.78mm)
*Mtg. Base Colors: -0 Black, -2 Red.
0.44in (11.18mm)
0.120in
(3.04mm)
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +122˚F (+50˚C) max.
*Std. Color: -0 Black, -2 Red.
Sold in pkgs. of 10.
Panel Cut-Out
Pin Tip Jack
0.72in
(22.35mm)
Model# 3542-*
Accepts 0.080in (2.03mm) dia. pin.
Miniature Banana
Jack to Banana Plug
Material: Jack: gold-plated brass;
Spring: beryllium copper; Insulation:
polycarbonate.
0.88in
(18.29mm)
0.250in (6.35mm)
Rating: Hands free testing in controlled
voltage environment: 1500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 5A,
+239˚F (115˚C) max.
*Std. Colors: Available in 10 colors.
0.234in
(59.44mm)
Sold in pkgs. of 10.
Panel Cut-Out
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Model# 2477-*
Converts miniature banana plugs to
standard.
x-hole 0.166in (4.22mm)
0.44in
(11.18mm)
1.55in (39.37mm)
Material: Jack: nickel-plated brass;
Spring: nickel-plated beryllium copper;
Insulation: ABS.
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +122˚F (+50˚C) max.
*Std. Color: -0 Black, -2 Red.
Sold in pkgs. of 10.
www.pomonaelectronics.com
39
Banana Plugs and Jacks
40
Pin Tip Jack to
Banana Plug
Model# 1809-*
Accepts 0.080in (2.03mm) pin tip plug or probe
tip. Fits standard 0.166in (4.22mm) dia.
banana jack.
x-hole 0.166in (4.22mm)
1.55in (39.37mm)
x-hole 0.166
in (4.21mm)
Material: gold-plated beryllium copper.
Rating: Hands free testing in controlled voltage
environment: 2500 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 5A, +122˚F (+50˚C) max.
0.44in
(11.18mm)
Double Banana Plug
with Binding Posts,
Stackable, Solderless
*Std. Color: -0 Black, -2 Red.
0.75in
(19.05mm)
1.19in
(30.23mm)
2.48in (62.99mm)
x-hole 0.166in
(4.22mm)
0.50in
(12.70mm)
0.44in (11.18mm)
Model# 1432-*
0.080in
(2.03mm)
Nickel
Gold
Features insulated binding posts on 0.750in
(19.05mm) centers for rapid mounting and
interchangeability of components. Center
cross hole 0.166in (4.22mm) dia. provides
side stackup connection.
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 15A,
+122˚F (+50˚C) max.
Color: Black.
Use to mate standard banana plug patch cords
to equipment having pin jacks.
2 mm Banana Plug
Material: Jack/Plug: nickel-plated brass;
Insulation: ABS.
1.5in (38.10mm)
Plating
1286
5405
Material: Binding Post/Banana Plug
Body: brass; Spring: beryllium copper;
Insulation: ABS.
Sold in pkgs. of 10.
Banana Jack to Pin
Tip Plug
Model#
Rating: Hands free testing in controlled voltage
environment: 3000 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 5A, +122˚F (+50˚C) max.
Model# 5936-*
Solder type wire connection.
Accepts 18-22 AWG wire.
0.16in
(4.1mm)
Rating: Hands free testing in controlled
voltage environment: 500 Vrms; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 5A,
≤ 2 mΩ.
*Std. Colors: -0 Black, -2 Red.
Sold in pkgs. of 10.
*Std. Colors: -0 Black, -2 Red, -4 Yellow,
-5 Green, -6 Blue.
Assembled Length: 1.07in (27.2 mm).
Sold unassembled, in pkgs. of 10 per color.
Insulated Double
Banana Plug Shorting
Bar with Binding Post
0.75in
(19.05mm)
1.35in
(34.29mm)
Model# 5165-*
Not compatible with Miniature Banana Plug
or Pin Tip.
Fits standard banana jack.
Shorting bar is completely insulated in clear
ABS thermoplastic.
Material: Binding Post/Banana Plug
Body/Shorting Bar: nickel-plated brass; Spring:
nickel-plated beryllium copper; Insulation:
polycarbonate.
2 mm Banana Jack
Max. Panel Thickness: 0.31in (8mm).
0.77in
(19.6mm)
Material: Insulation: nylon; Finish: nickel
plating.
Rating: Hands free testing in controlled voltage
environment: 2500 Vdc; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/70 Vdc, 15A, +122˚F (+50˚C) max.
1.78in(45.21mm)
Max. open
*Binding Post Colors: -0 Black, -2 Red.
Rating: Hands free testing in controlled
voltage environment: 500 Vrms; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 5A,
≤ 2 mΩ.
0.14in
(3.5mm)
*Std. Colors: -0 Black.
Panel Cut-Out
Connector Test Adapters
Pin type
Model#
Socket type
2.75 - 3.18in (69.9 - 80.8mm)
2.49in (63.2mm)
4690-*
4691-*
3560-*
3561-*
3562-*
3563-*
3564-*
3565-*
Model# 5935-*
Contact Size
22
20
16
12
22
0.030in (0.76mm)
0.030in (0.76mm)
20
0.040in (1.02mm)
0.040in (1.02mm)
16
0.063in (1.60mm)
0.063in (1.60mm)
12
0.093in (2.36mm)
0.093in (2.36mm)
An ideal test adapter for rapid testing of the
hard-to-get at contacts of multi-pin/socket
connectors. Flexible tip allows testing of
adjacent contacts. Flexibility and full insulation protects against shorting or contact
damage. Model 4690 also fits 0.025in
(0.63mm) sq. pins.
Sold in pkgs. of 10 per color.
Not compatible with Miniature Banana
Plug or Pin Tip.
Type
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Pin
Current Rating
3A
5A
3A
7.5A
3A
13A
3A
23A
Material: Banana Jack: nickel-plated brass;
Socket: gold-plated copper; Pin: gold-plated
brass; Insulation: PVC.
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, +122˚F
(+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
www.pomonaelectronics.com
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Banana Plugs and Jacks
Test Connector Adapter
Set
Model# 6481
Full set of pin and socket adapters.
18 piece set includes one black and red pin
and socket of each size.
Includes Silicone insulated 4ft (1.21m)
leads to fit most DMMs from Fluke,
Amprobe, Greenlee and others.
Low Thermal EMF
Insulated Spade Lug
to Banana Jack
0.79in
(20.07mm)
41
Model# 2305
Special alloy and plating preserve the
accuracy of low voltage measurement
equipment. Thermal effects are minimized.
Heavy construction for minimum voltage
loss. Mates with low voltage banana plug
patch cords and binding posts.
0.26in
(6.60mm)
Material: Jack and Spade Lug: goldplated tellurium copper; Insulation: ABS.
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
15A, +122˚F (+50˚C) max.
1.42in (36.07mm)
0.38in (9.65mm)
0.50in
(12.70mm)
Set of one red and one black.
4 mm (0.16in) Binding
Post
Banana Jack to .080in
(2mm) Dia. Pin
Tip Jack
0.38in
(9.65mm)
1.50in (38.10mm)
Model# 5932-*
Max. Panel Thickness: 0.12in (3.0mm)
Crosshole 0.08in (2.0mm).
Model# 3834-*
Adapts standard 0.166in (4.22mm) dia.
banana plug to 0.080in (2.03mm) dia. pin
tip plug.
Material: Banana Jack: nickel-plated
brass; Pin Jack: gold-plated beryllium
copper; Insulation: polypropylene.
Rating: Hands free testing in controlled
voltage environment: 750 Vrms; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
25A, ≤ 2 mΩ.
1.58in (40.7mm) open
0.16in (4.0mm)
*Std. Colors: -0 Black, -2 Red.
0.43in (11.0mm)
Rating: Hands free testing in controlled
voltage environment: 3000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 5A,
+131˚F (+55˚C) max.
Sold in pkgs. of 10 per color.
Panel Cut-Out
*Std Colors: -0 Black.
Do-It-Yourself In-Line
4 mm (0.16in) Banana
Plug
0.65in
(16.5mm)
1.73in (44.0mm)
Model# 5934-*
Model#
A
Rating: Hands free testing in controlled
voltage environment: 750 V ac/dc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 25A.
Sold in pkgs. of 10 per color.
B
1.71in (43.43mm)
Lug Size
Plugs into DMM leads. Permits DMM
leads to be used with equipment
having barrier strips, or binding post.
A
Material: Insulation: Nylon.
B
3744A-* 0.14in (3.56mm) 0.24in (6.10mm) 4, 5, 6
3777A-* 0.2in (5.0mm)
0.30in (7.7mm) 8, 10
Wire connection by set screw. Accepts
18, 20 and 22 AWG wire.
*Std. Colors: -0 Black, -2 Red.
0.19in
(4.65mm)
Spade Lug to
DMM Banana
Jack
Material: Banana Jack: nickel-plated
brass; Spade Lug: tin-plated copper;
Insulation: polypropylene.
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
15A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red,
-02 Set of one black and one red.
Binding Post to
Banana Plug
x-hole 0.166in (4.22mm)
2.46in (62.48mm)
Max. open
0.44in (11.18mm)
Model# 2894-*
Features insulated binding post for rapid
mounting and interchangeability of components. Accepts standard banana plug.
Center cross hole 0.166in (4.220mm) dia.
provides side stackup connection.
Material: Binding Post/Banana Plug
Body: nickel-plated brass; Spring: nickelplated beryllium copper; Insulation: ABS
Rating: Hands free testing in controlled
voltage environment: 2500 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
15A, +122˚F (+50˚C) max.
*Binding Post Colors: -0 Black, -2 Red.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
www.pomonaelectronics.com
Patch Cords and Test Leads
Pomona has made it easy for you to have exactly what you need with a huge
selection of patch cords and test leads designed for reliable, convenient
connections. Whether you need a test lead that can access an IC pin without
shorting or a patch cord that accommodates multiple stacking, Pomona
Electronics’ design and reliability are your connection with quality.
42
Wire Specifications
Wire Designation
AWG
Description
O.D.
Jacket
Temperature Range
Color
18
18
20
22
12
65/36 copper
65/36 copper
41/35 copper
26/36 copper
7 x 38/36 copper
0.144in (3.66mm)
0.144in (3.66mm)
0.087in (2.20mm)
0.064in (1.62mm)
0.144in (3.66mm)
PVC
Silicone
PVC
PVC
PVC
-4 to 221°F (-20 to +105°C)
-58 to 302°F (-50 to +150°C)
-4 to 221°F (-20 to +105°C)
-4 to 221°F (-20 to +105°C)
140°F (+60°C)
10 Colors
Black and Red
10 colors
10 colors
Black, Red, Green
B
Silicone
P
PTO
How To Order
Test Lead Holders
Model#
Test Lead Length
Typical Pomona Part Number:
Lead Length in Inches
(Measured Inside Connectors)
Specify Color
1508
4408
2708
3781-24-2
Color
“A”
Max Cable Dia.
Number
of Slots
Orange
Black
Blue
0.210in (5.33mm)
0.320in (8.13mm)
0.450in (11.43mm)
14
10
9
11.00in (279.4mm)
2.71in
(68.83mm)
Multi-Stacking Banana
Plug Patch Cord
1.55in
(39.37mm)
0.52in
(13.20mm)
Model#
B-4-*
B-8-*
B-12-*
B-18-*
B-24-*
B-36-*
B-48-*
B-60-*
B-72-*
Length
4in
8in
12in
18in
24in
36in
48in
60in
72in
(0.1m)
(0.2m)
(0.3m)
(0.5m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
(1.8m)
Model B: Multi-Stacking Banana
Plug Patch Cord features a nickel-plated
finish.
Model#
2948-12-*
2948-24-*
2948-36-*
2948-48-*
2948-60-*
Length
Special Features
12in (0.3m) gold-plated finish
24in (0.6m)
"
36in (0.9m)
"
48in (1.2m)
"
60in (1.5m)
"
0.53in
(13.46mm)
Multi-stacking sheathed
(4mm) Banana Plug
Patch Cord
3.50in
(188.9mm)
A
Model# 6727-*
4ft (1.2 meter) stackable safety lead.
Material: Contacts: nickel-plated
brass; Wire: multi-strand copper,
Cable: 18 AWG Wire, 0.144in
(3.56mm) O.D.
Insulation: silicone.
Rating: IEC1010 1000V Cat III, 20A
max (10A cont.), 14 to 176°F
(-10 to +80°C).
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
15A, +131˚F (+55˚C) max.
*Std. Colors: -0 Black only,
-2 Red only.
*Std. Colors: Available in 10 Colors.
Model 2948 Multi-Stacking Banana Plug Patch
Cord features a gold-plated finish.
*Std. Colors: -0 Black, -2 Red.
Cross Stacking Banana
Plug Patch Cord
1.55in
(39.37mm)
Model#
1440-12-*
1440-18-*
1440-24-*
1440-36-*
1440-48-*
1440-60-*
Length
12in (0.3m)
18in (0.5m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Cable: 18 AWG Wire, 0.144in
(3.56mm) O.D.
0.38in (9.65mm)
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc;
For CE compliance: not intended
for hand held use at voltages above
33 Vrms/70 Vdc,15A, +131˚F (+55˚C)
max.
www.pomonaelectronics.com
Horizontal Stacking Banana
Plug Patch Cord
1.96in
49.78mm
Model#
Length
HB-12-*
HB-24-*
HB-36-*
HB-48-*
HB-60-*
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Cable: 18 AWG Wire, 0.144in
(3.56mm) O.D.
Rating: Hands free testing in
controlled voltage environment:
5000 Vdc; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, 15A,
+131˚F (+55˚C) max.
*Std. Colors: -0 Black, -2 Red.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Patch Cords and Test Leads
Multi-Stacking Banana Plug
Coiled Patch Cord
Model#
Ext. Length
2484*
48in (1.23mm)
Right Angle Stacking
BananaPlug Patch Cord
Model#
2864-24-*
Length
24in (0.6m)
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
Cable: 18 AWG Wire, 0.14in
(3.56mm) O.D.
Extended Length: 48in (1.2mm).
Rating: Hands free testing in
controlled voltage environment: 5000
Vdc; For CE compliance: not intended
for hand held use at voltages above
33 Vrms/70 Vdc, 15A, +131˚F
(+55˚C) max.
One patch cord replaces many
different lengths.
0.89in (22.60mm)
Rating: Hands free testing in
controlled voltage environment:
270 Vdc; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, 5A,
+131˚F (+55˚C) max.
*Std. Colors: -0 Black, -2 Red.
*Std. Colors: -0 Black, -2 Red.
Multi-Stacking Banana Plug
to Minigrabber ® Test Clip
1.55in (39.37mm)
2.54in (64.52mm)
Multi-Stacking Banana Plug
Patch Cord with In-Line
Fuse Holder
1.55in
Model#
4274-24-*
4274-36-*
Length
24in (0.6m)
36in (0.9m)
Model#
3782-12-*
3782-24-*
3782-36-*
3782-48-*
3782-60-*
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Hook attaches to component leads up
to 0.060in (1.52mm) O.D.
(39.37mm)
Cable: 18 AWG Wire, 0.144in
(3.56mm) O.D.
1.55in
(39.37mm)
Rating: Hands free testing in
controlled voltage environment:
5000 Vdc; For CE compliance: not
intended for hand held use at
voltages above 33 Vrms/70 Vdc,
15A, +131˚F (+55˚C).
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
Rating: Hands free testing in controlled voltage environment: 300V;
For CE compliance: not intended for
hand held use at voltages above
33 Vrms/70 Vdc, 5A, +131˚F
(+55˚C) max.
*Std. Colors: -0 Black, -2 Red.
*Std. Colors: Available in 10 colors.
Multi-Stacking Banana Plug
to Miniature Stacking
Banana Plug
0.88in (22.35mm)
Model#
3014-36-*
Length
36in (0.9m)
Multi-Stacking Banana Plug
to Minigrabber ® Test Clip
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
2.54in (64.52mm)
Rating: Hands free testing in
controlled voltage environment:
3000 Vdc; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, 5A,
+131˚F (+55˚C) max.
Model#
6249-12-*
6249-24-*
6249-36-*
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
Features a slim 0.36in (9.14mm)
body width. Hook attaches to
component leads up to 0.060in
(1.52mm) O.D.
Cable: 18 AWG Silicone insulated
wire, 0.144in (3.56mm) O.D.
*Std. Colors: -0 Black, -2 Red.
1.55in
(39.37mm)
1.55in
(39.37mm)
Rating: Hands free testing in controlled voltage environment: 300V;
For CE compliance: not intended for
hand held use at voltages above
33 Vrms/70 Vdc, 5A.
*Std. Colors: -0 Black, -2 Red.
Multi-Stacking Banana Plug
to Stacking Pin Tip Plug
1.55in
(39.37mm)
Model#
1126-12-*
1126-24-*
1126-36-*
1126-48-*
1126-60-*
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Multi-Stacking Banana Plug
to Minigrabber ® Test Clip
(Coiled) Patch Cord
1.35in
(34.29mm)
*Std. Colors: -0 Black, -2 Red.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Ext. Length
4538-*
48in (1.2m)
Hook attaches to components up to
0.060in (1.52mm) O.D.
Cable: 20 AWG Retractile Cord,
0.087in (2.21mm) O.D.
20 AWG Wire, 0.087in (2.21mm) O.D.
Rating: Hands free testing in
controlled voltage environment:
3000 Vdc; For CE compliance: not
intended for hand held use at voltages
above 33 Vrms/70 Vdc, 5A, +131˚F
(+55˚C) max.
Model#
Rating: Hands free testing in controlled voltage environment: 300V;
For CE compliance: not intended for
hand held use at voltages above
33 Vrms/70 Vdc, 5A, +131˚F (+55˚C).
1.55n
(39.37mm)
*Std. Colors: -0 Black, -2 Red.
2.54in
(64.52mm)
www.pomonaelectronics.com
43
Patch Cords and Test Leads
44
Multi-Stacking Banana Plug
to Micrograbber ® Test Clip
1.71in
(43.43mm)
Model#
5053-12-*
5053-24-*
5053-36-*
5053-48-*
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
Minigrabber® Test
Clip with Sheathed
Banana Jack
Model#
Plug Type
6248-12-*
Sheathed
Banana Jack
Ratings
IEC1010 2-031
CAT II 300V
Test Lead Extender.
Silicone insulated 1ft (0.3m) leads fit on the end of
modular test leads such as Pomona 5907A.
Hook attaches to components up to
0.040in (1.02mm) O.D.
Std. Colors: -0 Black, -2 Red.
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
1.55in
(39.37mm)
Rating: Hands free testing in
controlled voltage environment:
150V; For CE compliance: not intended for hand held use at voltages
above 33 Vrms/70 Vdc, 3A, +131˚F
(+55˚C) max.
*Std. Colors: -0 Black, -2 Red.
Multi-Stacking Banana Plug
to Maxigrabber ® Test Clip
6.00in (152.4mm)
1.55in
(39.37mm)
Model#
4996-36-*
4996-48-*
4996-60-*
Length
36in (0.9m)
48in (1.2m)
60in (1.5m)
Multi-Stacking Banana
Plug to SMD Grabber®
Test Clip
1.71in
(43.43mm)
1.55in
(39.37mm)
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
Pincer Opening: 0.040in (1.02mm).
Cable: 22 AWG Wire, 0.064in
(1.63mm) O.D.
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 150V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
0.5A, +131˚F (+55˚C) max.
*Std. Colors: -0 Black, -2 Red.
1.55in
(39.37mm)
*Std. Colors: -0 Black, -2 Red.
2.59in(65.79mm)
5302-12-*
5302-24-*
5302-36-*
Hook attaches to components up to
0.060in (1.52mm) O.D.
Rating: Hands free testing in controlled voltage environment: 300V;
For CE compliance: not intended for
hand held use at voltages above
33 Vrms/70 Vdc, 5A, +131˚F
(+55˚C) max.
Multi-Stacking Banana Plug
to MiniPincer® Test Clip
Model#
Model#
5421-24-*
5421-36-*
Length
24in (0.6m)
36in (0.9m)
Double Banana Plug
with Safety Shrouds
Model#
6283-C-36
6283-C-48
6283-C-60
Length
36in (0.9m)
48in (1.2m)
60in (1.5m)
Pincer Opening: 0.090in (2.29mm).
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
Fits Digital Multi-meters and other
instruments with shrouded jacks.
Rating: Hands free testing in controlled voltage environment: 300V;
For CE compliance: not intended for
hand held use at voltages above
33 Vrms/70 Vdc, 5A, +131˚F (+55˚C)
max.
Offset design designates hot and ground
leads.
*Std. Colors: -0 Black, -2 Red.
Overvoltage CAT II, 600V, 5A per
IEC1010-2-031.
Black and red banana plug shrouds.
Molded strain relief for long life.
MIL spec coaxial cable.
2.53in
(64.28mm)
Minigrabber® Test Clip Leads
Model#
Plug Type
Ratings
6244-48-*
5428-48-*
6231
6245-48-*
Right-angle DMM
Right-angle DMM
Right-angle DMM
Straight DMM
CAT II 300V
300 Vrms*
300 Vrms*
CAT II 300V
Silicone insulated 4ft (122m) leads fit most meters
from Fluke, Wavetek (Meterman), HP, Amprobe,
Greenlee and others
Std. Colors: -0 Black, -2 Red
*Hands free testing in controlled voltage environments: 300 Vrms; For CE compliance: not intended
for hand held use at voltages above 33 Vrms/70 Vac.
6244
www.pomonaelectronics.com
5428/6231
6245
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Patch Cords and Test Leads
Multi-Stacking Double
Banana Plugs on
Retractile (Coiled) Cord
Model#
3864-48
3864-72
Extended Length
48in (1.2m)
72in (1.8m)
Multi-Stacking Double
Banana Plug,
One End Only
1.55in
Model#
1326-A-60
1326-C-60
Length
60in (1.5m)
60in (1.5m)
(39.37mm)
Rating: Hands free testing in controlled voltage environment: 90
Vac/270 Vdc; For CE compliance: not
intended for hand held use at voltages
above 33 Vrms/70 Vdc, +122˚F
(+50˚C) max.
1.55in
(39.37mm)
0.75in
(19.05mm)
Cable Type: Shielded Microphone
Cable.
Rating: Hands free testing in
controlled voltage environment:
A: 300 Vrms, C: 1400 Vrms; For CE
compliance: not intended for hand
held use at voltages above
33 Vrms/70 Vdc, +131˚F (+55˚C) max.
See chart on page 9 for additional
cable specifications.
0.75in
(19.05mm)
Multi-Stacking Double to
Multi-Stacking Single
Banana Plugs
1.55in
(39.37mm)
Model#
1368-A-18
1368-A-24
1368-A-30
1368-A-36
1368-A-48
1368-A-60
Length
18in (0.5m)
24in (0.6m)
30in (0.76m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Double Banana Plug to
Stacking Pin Tip Plugs
1.55in (39.37mm)
0.75in
(19.05mm)
0.75in
(19.05mm) Rating: Hands free testing in
controlled voltage environment:
300 Vrms; For CE compliance: not
intended for hand held use at voltages
above 33 Vrms/70 Vdc, +122˚F
(+50˚C) max.
See chart on page 9 for additional
cable specifications.
1.55in
(39.37mm)
5.0in (127.0mm)
Two Conductor shielded
Balanced Line
1.55in (39.37mm)
0.75in
(19.05mm)
Model#
1167-18
1167-24
1167-30
1167-36
1167-48
1167-60
Length
18in
24in
30in
36in
48in
60in
(0.5m)
(0.6m)
(0.76m)
(0.9m)
(1.2m)
(1.5m)
1.35in
(34.29mm)
0.80in
(2.03mm)
8.0in (203.2mm)
2BC-PP-36
2BC-PP-48
2BC-PP-60
Length
36in (0.9m)
48in (1.2m)
60in (1.5m)
Cable Type: RG58C/U 0.195in
(4.95mm) O.D.
Rating: Hands free testing in
controlled voltage environment:
1400 Vrms; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, +122˚F
(+50˚C) max.
1.30in (33.02mm)
Multi-Stacking Banana
Plugs, Two Each End
6.0in (152.4mm)
Model#
1.61in
(40.90mm)
Rating: Hands free testing in
controlled voltage environment:
1000 Vrms; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, +131˚F
(+55˚C) max.
Model#
2239-C-24
2239-C-36
2239-C-48
Length
24in (0.6m)
36in (0.9m)
48in (1.2m)
Rating: Hands free testing in
controlled voltage environment:
1400 Vrms; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, +131˚F
(+55˚C) Max.
See chart on page 9 for additional
cable specifications.
Cable Type I: See chart on page 9 for
additional cable specifications.
Multi-Stacking
Double Banana
Plug Cables
1.55in
(39.27mm)
Model#
Cable Type
2BA-18 Two Conductor Twisted
2BA-24
18 AWG,Twisted
TwoPair,
Conductor
2BA-36 0.250inPair,
(??.??mm)
18 AWG,O.D.
2BA-48
0.25in (6.35mm) O.D.
2BA-60
2BC-24 0.195in (??.??mm) O.D.
2BC-36
RG58C/U,
2BC-48
0.195in (4.95mm) O.D.
2BC-60
0.75in
(19.05mm)
Length
1.55in
(39.37)
18in (0.5m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Rating: Hands free testing in controlled voltage
environment: 2BA: 300 Vrms, 2BC: 1400 Vrms;
For CE compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc, +131˚F
(+50˚C) max.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Multi-Stacking Double
Banana Plug to
Minigrabber® Test Clips
0.75in
(19.05mm)
Model#
3786-C-18
3786-C-24
3786-C-36
3786-C-48
3786-C-60
Length
18in (0.5m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Rating: Hands free testing in
controlled voltage environment:
300 Vrms; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, +122˚F
(+50˚C) max.
See chart on page 9 for additional
cable specifications.
1.50in
(38.1mm)
8.0n
(203.2mm)
2.56in
(65.02mm)
www.pomonaelectronics.com
45
Patch Cords and Test Leads
46
Double Banana Plug to
Micrograbber® Test Clips
1.55in
(39.37mm)
Model#
4768-K-24
4768-K-36
4768-K-48
4768-K-60
Length
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
Miniature Double Banana
Plug Cable
1.00in
(25.40mm)
Model#
2247-K-24
Length
24in (0.6m)
Rating: Hands free testing in
controlled voltage environment:
1000 Vrms; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, +131˚F
0.50in
(12.70mm) (+55˚C) max.
Rating: Hands free testing in
0.75in
(19.05mm) controlled voltage environment:
150 Vrms; For CE compliance: not
intended for hand held use at volt1.50in (38.10mm)
ages above 33 Vrms/70 Vdc, +122˚F
(+50˚C) max.
Cable Type: RG174/U, 0.100in
(2.54mm) O.D.
See chart on page 9 for additional
cable specifications.
1.74in
(44.20mm)
8.0in
(203.2mm)
Double Banana Plug to
Alligator Test Clips
1.55in
(39.37mm)
Model#
2BA-AL-36
2BA-AL-48
2BA-AL-60
Length
Multi-Stacking Double
Banana Plug to
Minipincer® Test Clips
36in (0.9m)
48in (1.2m)
60in (1.5m)
1.55in
(39.37mm)
Cable Type: Two cond. Twisted Pair.
0.75in
(19.05mm)
Model#
2BC-AL-60
0.75in
(19.05mm)
Length
Model#
5422-C-60
Length
60in (1.5m)
Rating: Hands free testing in
controlled voltage environment:
300 Vrms; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, +122˚F
(+50˚C) max.
See chart on page 9 for additional
cable specifications.
60in (1.5m)
Cable Type: RG58C/U50.Ω
1.30in (33.02mm)
7.30in
(185.4mm)
2.13in
(54.10mm)
Rating: Hands free testing in
controlled voltage environment:
150 Vrms; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, +122˚F
(+50˚C) max.
1.50in
(38.10mm)
8.0in
(203.2mm)
2.59in
(65.79mm)
Jaw Opening: 0.30in (7.62mm) max.
Minigator Clips to Miniature
Double Banana Plug
Double Banana Plug to
Minigator Test Clips
Model#
2BC-MG-36
1.00in
(25.40mm)
Length
36in (0.9m)
Cable Type: RG58C/U.
1.55in
(39.37mm)
0.75in
(19.05mm)
Rating: Hands free testing in controlled voltage environment: 45 Vrms;
For CE compliance: not intended for
hand held use at voltages above 33
Vrms/70 Vdc, +122˚F (+50˚C) max.
1.70in
(43.18mm)
3027-K-24
Length
24in (0.6m)
Rating: Hands free testing in
controlled voltage environment:
45 Vrms; For CE compliance: not
intended for hand held use at voltages above 33 Vrms/70 Vdc, +122˚F
(+50˚C) max.
0.50in
(12.70mm)
Jaw Opening: 0.187in (4.75mm)
1.30n (33.02mm)
See chart on page 9 for additional
cable specifications.
Jaw Opening: 0.187in (4.75mm)
max.
8.20in(208.53mm)
8.0in
(203.2mm)
Model#
1.18in
(29.97mm)
1.18in
(29.97mm)
www.pomonaelectronics.com
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Patch Cords and Test Leads
Low Thermal EMF Patch Cords
Special alloy plating and construction preserve the accuracy of microvolt and nanovolt measurement equipment. Designed to greatly minimize the effect of Thermal Electric Voltage
(Thermal EMF). Thermal EMF is generated at the junction of dissimilar metals at different
temperatures and is common source of error in micro- and nano- volt measurements.
Shielded Low Thermal EMF
Spade Lug Patch Cord
Model#
Length
1756-24
1756-48
24in (0.6m)
48in (1.2m)
Minigrabber® Test Clip
Patch Cord
2.54in (64.52mm)
0.26in
(6.60mm)
0.50in
(12.70mm)
Cable: 12 AWG Wire, Shield Leads:
18 AWG.
8in
12in
18in
24in
36in
48in
60in
(0.2m)
(0.3m)
(0.5m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
Material: Spade Lug: gold-plated
Electrolytic Tough Pitch (ETP) 110
Copper Alloy, 1/2 hard.
Rating: Hands free testing in controlled
voltage environment: 300V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +216˚F (+102˚C) max.
Rating: Hands free testing in controlled
voltage environment: 2000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
20A, 131+˚F (+55˚C) max.
0.14in
(3.56mm) O.D.
3781-8-*
3781-12-*
3781-18-*
3781-24-*
3781-36-*
3781-48-*
3781-60-*
Length
Hook attaches to component leads up
to 0.060in (1.52mm) O.D.
0.14in (3.56mm) O.D.
0.25in
(6.35mm) O.D.
Model#
*Std. Colors: Available in 10 colors.
Minigrabber® Test
Clip Patch Cord Kit
Model# 5523
Kit contains 10 pcs. of Model 3781-24,
one of each color.
Low Thermal EMF Spade
Lug Patch Cord
1.41in
(35.84mm)
Model#
1693-36-*
1693-60-*
Length
36in (0.9m)
60in (1.5m)
One End Only
3780-60-*
0.50in
(12.70mm)
Low Thermal EMF
Retractable Sheath
Banana Plug Patch Cord
2.72in (69.09mm)
Material: Spade Lug: gold-plated
Electrolytic Tough Pitch (ETP) 110
Copper Alloy, 1/2 hard.
Rating: Hands free testing in controlled
voltage environment: 2000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
20A, +131˚F (+55˚C) max.
Minigrabber® Test Clip
Patch Cord
2.64in (67.06mm)
5291A-12-*
5291A-36-*
5291A-60-*
Model#
6246-12-*
6246-24-*
6246-36-*
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
Features a slim 0.36in (9.14mm) body
width. Hook attaches to component leads
up to 0.060in (1.52mm) O.D.
*Std. Colors: -0 Black, -2 Red.
Model#
Length
60in (1.5m)
*Std. Colors: -0 Black, -2 Red.
Cable: 12 AWG Wire, 0.144in
(3.56mm) O.D.
0.26in
(6.60mm)
Model#
Cable: 18 AWG silicone insulated wire,
0.144in (3.56mm) O.D.
Length
12in (0.3m)
36in (0.9m)
60in (1.5m)
Rating: Hands free testing in controlled
voltage environment: 300V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A per IEC1010-2-031 CAT II
Cable: 12 AWG Wire, 0.144in
(3.56mm) O.D.
*Std. Colors: -0 Black, -2 Red.
Material: Plug Body: gold-plated
tellurium copper; Spring: gold-plated
Beryllium Copper.
Rating: 1000V per IEC1010-2-031, 7A,
+131˚F (+55˚C).
*Std. Colors: -0 Black, -2 Red.
Low Thermal EMF
Retractable Sheath
Banana Plug to Spade Lug
1.41in
(35.81mm)
0.26in (6.60mm)
0.50in (12.70mm)
Modle#
5295-36-*
Minigrabber® Test Clip
(Coiled) Patch Cord
Model# 4537-*
Cable: 20 AWG Retractile Cord, 0.087in
(2.21mm) O.D. Extended Length: 48in
(1.22mm).
Length
36in (0.9m)
Rating: Hands free testing in controlled
voltage environment: 300V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, 140˚F (+60˚C) max.
Cable: 12 AWG Wire, 0.144in
(3.56mm) O.D.
Material: Spade Lug: gold-plated
Electrolytic Tough Pitch (ETP) 110
Copper Alloy, 1/2 hard; Plug End: goldplated tellurium copper.
*Std. Colors: -0 Black, -2 Red.
One End
Only
Rating: Hands free testing in controlled
voltage environment: 1000V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
7A, +131˚F (+55˚C) max.
Model# 4536-*
*Std. Colors: -0 Black, -2 Red.
2.72in (60.09mm)
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
2.54in (64.52mm)
www.pomonaelectronics.com
47
Patch Cords and Test Leads
48
Minipincer® Test Clip
Patch Cord
Model#
5419-12-*
5419-24-*
Length
12in (0.3m)
24in (0.6m)
Ultra-Thin MicroGrabber ®
Test Clip Patch Cord
Model#
6091-10-*
6091-20-*
Length
10in (0.25m)
20in (0.51m)
2.59in (65.79mm)
Pincer Opening: 0.090in (2.29mm).
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
2.13 (54.10mm)
Rating: Hands free testing in controlled
voltage environment: 300V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +176˚F (+80˚C) max.
Designed especially for today’s fine
pitched SMD’s. Clips have a narrow body
0.120in (3.05mm) wide, and a small
flexible shaft 0.050in (12.70mm)
dia. x 0.910in (23.11mm) long).
Pincer Opening: 0.024in (0.61mm).
Cable: 22 AWG Wire, 0.064in
(1.63mm) O.D.
*Std. Colors: -0 Black, -2 Red.
Rating: For CE compliance: not intended
for hand held use at voltages above
33 Vrms/60 Vdc, 1A, <15mΩ, +176˚F
(+80˚C) max.
*Std. Colors: -0 Black, -2 Red.
One End Only
SMD Grabber Test
Clip Patch Cord
®
1.71in (43.43mm)
Model#
5301-6-*
5301-12-*
5301-24-*
5301-36-*
6090-40-*
Length
6in
12in
24in
36in
(0.15m)
(0.3m)
(0.6m)
(0.9m)
Rating: Hands free testing in controlled
voltage environment: 45 Vac; For CE
compliance: not intended for hand held
use at voltages above
33 Vrms/70 Vdc, 2A, <15mΩ, +176˚F
(+80˚C) max.
Cable: 22 AWG Wire, 0.064in
(1.60mm) O.D.
*Std. Colors: -0 Black, -2 Red.
SMD Grabber® Test
Clip Patch Cord Kit
*Std. Colors: -0 Black, -2 Red.
Minigrabber ® Test Clip
to Minigator Test Clip
1.71in
(43.43mm)
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 45V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
Hook attaches to components up to
0.040in (1.02mm) O.D.
Multi-Stacking Banana
Plug to Alligator
Test Clip
2.30in (58.42mm)
20 AWG Wire, 0.087in (2.21mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 150V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
3A, +216˚F (+102˚C) max.
Model# 5525
Kit contains 10 pcs. of Model 4613-24,
one each of ten colors.
Model#
1166-8-*
1166-12-*
1166-24-*
1166-36-*
1166-48-*
1166-60-*
Length
8in
12in
24in
36in
48in
60in
(0.2m)
(0.3m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
Jaw Opening: 0.300in (7.62mm).
Cable: 18 AWG Wire, 0.144in
(3.56mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 150V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
MicroGrabber ® Test
Clip Patch Cord Kit
Length
12in (0.3m)
24in (0.6m)
Jaw Opening: 0.187in (4.75mm).
1.79in
(45.47mm)
4613-12-*
4613-24-*
4613-36-*
4613-48-*
4652-12-*
4652-24-*
Hook attaches to component leads up to
0.060in (1.52mm) O.D.
Model# 5521
Model#
Model#
2.54in (64.51mm)
Kit contains 10 pcs. of Model 5301-24,
one each of ten colors.
MicroGrabber® Test
Clip Patch Cord
Length
40in (1.02m)
Same as 6091 with one end only.
Pincer Opening: 0.04in (1.63mm).
Rating: Hands free testing in controlled
voltage environment: 150V; For CE compliance: not intended for hand held use at
voltages above 33 Vrms/70 Vdc, 0.5A,
+216˚F (+102˚C) max.
Model#
1.55in
(39.37mm)
Banana Plug to
Alligator Clip Patch
Cord Kit
*Std. Colors: -0 Black, -2 Red.
Model#
Length
6357-36
36in (0.9m)
Kit contains 10 pcs. of Model 1166 patch
cords, one each of 10 colors.
www.pomonaelectronics.com
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Patch Cords and Test Leads
Minigator Test Clip
Patch Cord
1.79in (45.47mm)
Model#
MG-B-4-*
MG-B-8-*
MG-B-12-*
MG-B-24-*
MG-B-36-*
MG-B-48-*
Length
4in
8in
12in
24in
36in
48in
(0.1m)
(0.2m)
(0.3m)
(0.6m)
(0.9m)
(1.2m)
Multi-Stacking Banana
Plug to Minigator Test
Clip
1.55in
(39.37mm)
3220-8-*
3220-12-*
3220-24-*
3220-36-*
3220-48-*
3220-60-*
Length
8in (0.2m)
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2mm)
60in (1.52mm)
Jaw Opening: 0.187in (4.75mm).
Jaw Opening: 0.187in (4.75mm).
Cable: 18 AWG Wire, 0.144in (3.56mm) O.D.
Cable: 20 AWG Wire, 0.087in (2.21mm) O.D.
Rating: Hands free testing in controlled voltage environment: 45V; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/45 Vdc, 5A, +122˚F (+50˚C) max.
Rating: Hands free testing in controlled voltage environment: 45V; For CE compliance: not
intended for hand held use at voltages above
33 Vrms/45 Vdc, 5A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
Model#
1236-24-*
1.79in
(45.47mm)
Length
Rating: Hands free testing in controlled
voltage environment: 45V; For CE compliance: not intended for hand held use at
voltages above 33 Vrms/45 Vdc, 5A, +122˚F
(+50˚C) max.
5 Way Alligator to
Sheathed Right
Angle Set
6576-24-*
6576-36-*
6576-48-*
Model#
6483-48-02
Length
48in (1.2mm)
Clip includes bed of nails and single needle tip
for easy, versatile piercing of wire insulation to
contact inner conductor for measurement.
Pierces 19 to 26 AWG wire.
*Std. Colors: -0 Black, -2 Red.
Model#
*Std. Colors: -0 Black, -2 Red.
24in (0.6m)
Cable: 20 AWG Wire, 0.087in (2.21mm) O.D.
1000V Alligator
Patch Cord
Model#
Std. Colors: Set of one black and one red.
Length
24in (0.6m)
36in (0.9m)
48in (1.2m)
2.5in (63.5mm)
Jaw Opening: 0.300in (7.62mm).
Material: Body: nickel-plated steel;
Boot: santoprene rubber.
Cable: 18 AWG Wire, silicone insulated.
Rating: Hands free testing in controlled
voltage environment: 1000V, 10A, -13 to
176°F (-25°C to 80°C).
*Std. Colors: -0 Black, -2 Red.
Alligator Test Clip
Patch Cord
2.30in (58.42mm)
Model#
AL-B-4-*
AL-B-8-*
AL-B-12-*
AL-B-18-*
AL-B-24-*
AL-B-36-*
AL-B-48-*
AL-B-60-*
Length
4in
8in
12in
18in
24in
36in
48in
60in
Retractable Sheath
Banana Plug Patch
Cord
2.72in (69.09mm)
(0.1m)
(0.2m)
(0.3m)
(0.5m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
Model#
4911A-12-*
4911A-18-*
4911A-24-*
4911A-36-*
4911A-48-*
4911A-60-*
Length
12in
18in
24in
36in
48in
60in
(0.3m)
(0.5m)
(0.6m)
(0.9m)
(1.2mm)
(1.5mm)
Cable: 18 AWG Wire, 0.144in (3.56mm) O.D.
Rating: 1000V per IEC1010-2-031, 10A,
+176°F (+80°C) max.
*Std. Colors: -0 Black, -2 Red.
Jaw Opening: 0.300in (7.62mm).
Cable: 18 AWG Wire, 0.144in (3.56mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 150V; For CE compliance: not intended for hand held use at
voltages above 33 Vrms/70 Vdc, 5A, +122˚F
(+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
Alligator Test
Clip Patch Cord Kit
Model#
Length
6356-12
6356-24
6356-36
6356-60
12in (0.3m)
24in (0.6m)
36in (0.9m)
60in (1.5m)
Extra Large Alligator
Test Clip to Sheathed
Banana Plug
Patch Cord
3.50in
(88.90mm)
Model#
6570-36-*
Length
36in (0.9m)
Alligator length: 3.6in (91.44mm),
Jaw Opening: 0.8in (20.32mm).
Rating: Conforms to IEC1010-2-031,
Overvoltage.
Category III, 1000V, 10A.
Cable: High flex 18 AWG Silicone wire.
*Std. Colors: -0 Black, -2 Red.
Kit contains 10pcs. of Model AL-B patch
cords, one each of 10 colors.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
www.pomonaelectronics.com
49
Patch Cords and Test Leads
50
Retractable Sheath
Stacking Banana Plug
Patch Cord
2.07in
(52.58mm)
Model#
5403-12-*
5403-24-*
5403-36-*
5403-48-*
5403-60-*
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
This retractable sheath banana plug has a
stacking feature allowing the insertion of
standard or other retractable plugs.
0.025in (0.64mm) Square
Pin Jack Patch Cord
0.10in (2.54mm)
*Std. Colors: -0 Black, -2 Red.
Minigrabber® Test Clip to
Retractable Sheath
Banana Plug Patch Cord
Model#
5270-36-*
Length
6in (0.15m)
12in (0.3m)
24in (0.6m)
0.52in (13.21mm)
Rating: Hands free testing in controlled
voltage environment: 45 Vac/60 Vdc; For
CE compliance: not intended for hand held
use at voltages above 33 Vrms/60 Vdc,
3A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
0.025in (0.64mm)
Square Pin Jack
Patch Cord Kit
Model# 5948
Kit contains 10 pcs. of Model 4741-6,
one ea. of 10 colors.
Length
36in (0.9m)
Hook attaches to component leads up to
0.060in (1.52mm) O.D.
2.54in (64.52mm)
4741-6
4741-12
4741-24
Cable: 22 AWG Wire, 0.064in
(1.63mm) O.D.
Cable: 18 AWG wire, 0.144in
(3.56mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 1200 V ac/dc; For
CE compliance: not intended for hand
held use at voltages above 33 Vrms/70
Vdc, 7A, +131˚F (+55˚C) max.
Model#
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
0.025in (0.64mm) Square
Pin Jack to 0.080in
(2.03mm) Pin Tip Plug
0.65in (16.51mm)
Rating: Hands free testing in controlled
voltage environment: 300V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +131˚F (+55˚C) max.
0.48in
(12.19mm)
*Std. Colors: -0 Black, -2 Red.
Model#
4772-24-*
Length
24in (0.6m)
Cable: 22 AWG Wire, 0.064in
(1.63mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 45 Vac/60 Vdc; For
CE compliance: not intended for hand held
use at voltages above 33 Vrms/60 Vdc,
3A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
0.52in
(13.21mm)
0.52in (13.21mm)
Minigrabber® Test Clip
to Straight Banana
Plug Patch Cord
2.54in
(64.51mm)
Model#
4650-24-*
4650-36-*
Length
24in (0.6m)
36in (0.9m)
Hook attaches to component leads up to
0.060in (1.52mm) O.D.
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 300V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
1.54in
(39.12mm)
0.025in (0.64mm) Square
Pin Jack to Straight
Banana Plug
1.52in
(38.61mm)
0.10in
(2.54mm)
0.080in (2.0mm) Dia.
Pin Tip Plug Patch Cord
0.65in
(16.51mm)
0.48in
(12.19mm)
Model#
PT080-4-*
PT080-8-*
PT080-12-*
PT080-18-*
PT080-24-*
PT080-36-*
PT080-48-*
PT080-60-*
Length
4in
8in
12in
18in
24in
36in
48in
60in
(0.1m)
(0.2m)
(0.3m)
(0.5m)
(0.6m)
(0.9m)
(1.17m)
(1.52m)
Cable: 22 AWG Wire, 0.064in
(1.63mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 1000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
3A, +131˚F (+55˚C) max.
Model#
4771-24-*
4771-36-*
4771-48-*
Length
*Std. Colors: -0 Black, -2 Red.
24in (0.6m)
36in (0.9m)
48in (1.2m)
Cable: 22 AWG Wire, 0.064in
(1.63mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 45 Vac/60 Vdc;
For CE compliance: not intended for
hand held use at voltages above
33 Vrms/60 Vdc, 3A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
0.52in (13.21mm)
www.pomonaelectronics.com
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Patch Cords and Test Leads
0.025in (0.64mm)
Square Pin Jack Pin to
SMD Grabber® Test Clip
1.71in
(38.61mm)
Model#
5412-12-*
5412-24-*
5412-36-*
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
Minigrabber ® Test Clip
to Miniature Stacking
Banana Plug
3784-24-*
3784-36-*
Length
24in (0.6m)
36in (0.9m)
Pincer Opening: 0.04in (1.02mm).
Hook attaches to component leads up to
0.06in (1.52mm) O.D.
Cable: 22 AWG Wire, 0.064in
(1.63mm) O.D.
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
2.54in (64.52mm)
0.10in
(2.54mm)
Model#
Rating: Hands free testing in controlled
voltage environment: 150V; For CE compliance: not intended for hand held use at
voltages above 33 Vrms/70 Vdc, 0.5A,
+122˚F (+50˚C).
0.89in
(22.61mm)
Rating: Hands free testing in controlled
voltage environment: 300V; For CE compliance: not intended for hand held use at
voltages above 33 Vrms/70 Vdc, 5A,
+131˚F (+55˚C) max.
*Std. Colors: -0 Black, -2 Red.
*Std. Colors: -0 Black, -2 Red.
0.52in (13.21mm)
0.025in (0.64mm)
Square Pin Jack Pin
to SMD Grabber ® Kit
Stacking Pin Tip Plug
Patch Cord
1.35in
(34.29mm)
Model# 5924
Kit contains 10 pcs. of Model 5412-12,
one ea. of 10 colors.
Miniature Stacking
Banana Plug Patch Cord
0.89in
(22.61mm)
Model#
P-4-*
P-8-*
P-12-*
P-18-*
P-24-*
P-36-*
P-48-*
P-60-*
Length
4in
8in
12in
18in
24in
36in
48in
60in
(0.1m)
(0.2m)
(0.3m)
(0.5m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
(23.88mm)
Model#
2842-12-*
2842-36-*
Length
12in (0.3m)
36in (0.9m)
(0.1m)
(0.2m)
(0.3m)
(0.5m)
(0.6m)
(0.9m)
(1.2m)
(1.5m)
*Std. Colors: -0 Black, -2 Red.
Retractable Sheath
Banana Plug to
Banana Jack
2.72in (69.01mm)
Model#
5259-36-*
Length
36in (0.9m)
Cable: 18 AWG Wire, 0.144in
(3.56mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 1000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
7A, +131˚F (+55˚C) max.
Cable: 20 AWG Wire, 0.144in
(3.56mm) O.D.
Rating: Hands free testing in controlled
voltage environment: 3000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +131˚F (+55˚C) max.
Length
4in
8in
12in
18in
24in
36in
48in
60in
Rating: Hands free testing in controlled
voltage environment: 3000 Vdc; For CE
compliance: not intended for hand held use
at voltages above 33 Vrms/70 Vdc, 5A,
+131˚F (+55˚C) max.
Rating: Hands free testing in controlled
voltage environment: 3000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +131˚F (+55˚C) max.
Miniature Banana Plug
Patch Cord
0.94in
1081-4-*
1081-8-*
1081-12-*
1081-18-*
1081-24-*
1081-36-*
1081-48-*
1081-60-*
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
*Std. Colors: -0 Black, -2 Red.
Model#
1.28in
(32.51mm)
*Std. Colors: -0 Black, -2 Red.
*Std. Colors: -0 Black, -2 Red.
Alligator Test Clip to
Insulated Spade Lug
Banana Plug to
Banana Jack
1.52in
(39.37mm)
Model#
Length
4702-12-*
4702-24-*
4702-36-*
4702-48-*
4702-60-*
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.52m)
Cable: 18 AWG Wire, 0.144in
(3.56mm) O.D.
1.28in
(32.51mm)
Rating: Hands free testing in controlled
voltage environment: 5000 Vdc; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
15A, +131˚F (+55˚C) max.
1.41in
(35.81mm)
Model#
1960-36-*
Length
36in (0.9m)
Jaw Opening: 0.30in (7.62mm).
Cable: 18 AWG Wire, 0.144in
(3.56mm) O.D.
0.26in (6.60mm)
0.50in (12.70mm)
Rating: Hands free testing in controlled
voltage environment: 150V; For CE
compliance: not intended for hand held
use at voltages above 33 Vrms/70 Vdc,
5A, +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
2.30in
(58.42mm)
*Std. Colors: -0 Black, -2 Red.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
www.pomonaelectronics.com
51
Boxes and Enclosures
Pomona – the place to make your connections. From setting up system
electronics to circuitry prototyping to creating permanent junctions, Pomona
provides you with the boxes and enclosures to securely seal signal sensitive
cables and wires. The large variety of die-cast aluminum connectorized
enclosures and phenolic or molded thermoplastic boxes are ready to house
components in styles and sizes that will simplify your interconnections.
52
Miniature Size Die Cast Aluminum Box with Cover
Connector: A
Type
Length
Model# Finish
3754
3753
3751
3752
4507
4742
4864
2352
None
–
–
BBE
–
–
BBE
BNC (F)
0.72in (18.29mm)
BBE
BNC (F)
0.72in (18.29mm)
BBE BNC (F) x 2 0.53in (13.36mm)
Replacement cover
Cover screws, 100/pkg
Connector screws with solder turret
BBE = Blue Baked Enamel
3753/3754
Connector: B
Type
Length
–
–
–
–
BNC (F) 0.72in (18.29mm)
BNC (M) 0.85in (21.59mm)
BNC (M) 0.85in (21.59mm)
Cover and screws included with all boxes.
3752
0.08in (2.03mm)
1.13in
(28.70mm)
3751
4057
“A” Size Die Cast Aluminum
Box with Cover
2397/2400
2391
A
Model# Finish
2390
A
2400
2397
2390
2391
2392
2401
2393
2398
2399
4245
3728
4864
2352
Type
Connector: A
Length
B
B
1.50in (38.10mm)
Type
Connector: B
Length
0.88in
(22.35mm) depth
Type
Connector: C
Length
None
–
–
–
–
–
–
BBE
–
–
–
–
–
–
BBE BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm)
–
–
BBE BNC (M) 0.85in (21.59mm) BNC (F) 0.72in (18.29mm)
–
–
BBE BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm)
BBE BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm) BNC (M) 0.85in (21.59mm)
BBE BNC (F) 0.72in (18.29mm) BNC (M) 0.85in (21.59mm)
PDB
0.82in (20.83mm)
BBE SMA (F) 0.38in (9.69mm) SMA (M) 0.38in (9.69mm)
–
–
BBE SMA (F) 0.38in (9.69mm) SMA (F) 0.38in (9.69mm)
–
–
Replacement cover
Flange mounting cover
Cover screws, 100/pkg
Connector screws with solder turret
2392
BBE = Blue Baked Enamel
PDB = Post, Double Binding
Cover and screws included with all boxes.
0.08in
(2.03mm)
C
C
2401
2393
1.13in
(28.70mm)
A
A
2399
2398
www.pomonaelectronics.com
B
2.25in (57.15mm)
B
0.88in
(22.35mm) depth
Boxes and Enclosures
“B” Size Die Cast
Aluminum Box with
Cover
2417/2428
Model# Finish
2428
2417
3230
3231
2411
3239
2420
3232
3234
4246
3719
4864
2352
Connector: A
Type
Length
Connector: B
Type
Length
Connector: C
Type
Length
Connector: D
Type
Length
None
–
–
–
–
–
–
–
BBE
–
–
–
–
–
–
–
BBE BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm)
–
–
–
BBE BNC (F) 0.72in (18.29mm) BNC (M) 0.85in (21.59mm)
–
–
–
BBE
N (M) 0.81in (20.57mm)
N (F)
0.75in (19.05mm)
–
–
–
BBE
IBNC 0.47in (11.94mm)
IBNC
0.47in (11.94mm)
–
–
–
BBE BNC (F) 0.72in (18.29mm)
N (M) 0.75in (19.05mm)
–
–
–
BBE BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm)
–
BBE BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm) BNC (F)
Replacement cover
Flange mounting cover
Cover screws, 100/pkg
Connector screws with solder turret
BBE = Blue Baked Enamel
IBNC = Isolated BNC
–
–
–
–
–
–
–
–
0.72in (18.29mm)
Cover and screws included with all boxes.
3230
0.08in
(2.03mm)
C
C
3231
1.38in
(35.05mm)
3239
A
B
A
2411
B
2.25in (57.15mm)
1.13in
(28.70mm)
depth
3232
2420
A
B
C
D
3234
“C” Size Die Cast Aluminum Box with Cover
Model#
2906
2901
2902
4248
2352
Finish
Type
Connector: A
Length
None
–
–
BBE
–
–
BBE
BNC (F)
0.72 (18.29mm)
Replacement cover
Connector screws with solder turret
BBE = Blue Baked Enamel
Connector: B
Length
Type
–
–
BNC (F)
–
–
0.72 (18.29mm)
Cover and screws included with all boxes.
4.75in (120.65mm)
1.75in (44.45mm)
2901 / 2906
2901/2906
2.64in
(67.07mm)
A
A
B
4.25in (107.95mm)
B
1.71in
(43.43mm) depth
2902
www.pomonaelectronics.com
53
Boxes and Enclosures
54
“D” Size Die Cast Aluminum Box with Cover
Model#
3606
3601
3602
3603
4726
3958
2352
Finish
Type
Connector: A
Length
None
–
–
BBE
–
–
BBE
BNC (F)
0.72 (18.29mm)
BBE
BNC (F)
0.72 (18.29mm)
Replacement cover
Flange mounting cover
Connector screws with solder turret
BBE = Blue Baked Enamel
–
–
BNC (F)
BNC (M)
–
–
0.72 (18.29mm)
0.85 (21.59mm)
Cover and screws included with all boxes.
3603
3602
Connector: B
Length
Type
0.09in (2.29mm)
3.00in
(76.20mm)
A
B
3601/3606
A
“E” Size Die Cast
Aluminum Box
with Cover
2.63in (66.80mm)
Model# Finish
5186
4226
4416
6268
None
Blue Baked Enamel
Replacement cover
Cover screws, 100/pkg
Cover and screws included.
B
1.65in
(41.91mm) depth
8.87in (225.30mm)
2.75in
(69.85mm)
8.32in (211.33mm)
1.72in
(43.69mm) depth
4.22in
(107.19mm)
Recommended Circuit Board Sizes:
8.00in x 1.49in x .062in,
(203.2mm x 37.85 x 1.57mm) Thick.
4226
3.90in x 1.49in x .062in,
(99.06mm x 37.85 x 1.57mm) Thick.
7.60in x 3.40in x .062in,
(193.04mm x 86.36mm x 1.57mm) Thick.
“F” Size Extruded Aluminum Box with Covers
Model#
3306
3301
3302
4247
3328
4862
2352
Finish
Type
Connector: A
Length
None
–
–
BBE
–
–
BBE
BNC (F) 0.72in (18.29mm)
Replacement cover
Flange mounting cover
Cover screws, 100/pkg
Connector screws with solder turret
BBE = Blue Baked Enamel
Connector: B
Length
Type
–
–
BNC (F)
–
–
0.72in (18.29mm)
Cover and screws included with all boxes.
3301/3306
0.20in (5.08mm)
2.68in
(68.07mm)
A
A
B
4.13in (104.90mm)
B
1.66in
(42.16mm) depth
3302
Recommended Circuit Board Sizes:
3.90in x 1.48in x 0.062in,
(99.06mm x 37.59 x 1.57mm) Thick.
www.pomonaelectronics.com
2.40in x 1.48in x 0.062in,
(60.96mm x 37.59mm x 1.57mm) Thick.
Boxes and Enclosures
“G” Size Extruded
Aluminum Box with
Cover
Model# Finish
3316
3311
4247
3328
4862
None
Blue Baked Enamel
Replacement cover
Flange mounting cover
Cover screws, 100/pkg
55
0.20in (5.08mm)
2.68in
(68.07mm)
Cover and screws included.
Recommended Circuit Board Sizes:
3.90in x 2.98in x .062in,
(99.06mm x 75.69mm x 1.57mm) Thick.
3.16in
(80.26mm)
depth
4.13in (104.90mm)
2.40in x 2.98in x .062in,
(60.96mm x 75.69mm x 1.57mm) Thick.
3316
“H” Size Extruded
Aluminum Box with
Cover
Model#
Finish
3743
3742
4247
3328
4862
None
Blue Baked Enamel
Replacement cover
Flange mounting cover
Cover screws, 100/pkg
0.20in (5.08mm)
2.68in
(68.07mm)
Cover and screws included.
Recommended Circuit Board Sizes:
3.90in x 5.98in x .062in,
(99.06mm x 75.69mm x 1.57mm) Thick.
55
6.16in
(156.46mm)
depth
4.13in (104.90mm)
2.40in x 5.98in x 0.062in,
(60.96mm x 75.69mm x 1.57mm) Thick.
3742
“J” Size Die Cast Aluminum Box with Cover
Model#
5255
4655
4656
4658
4864
Finish
Connector: A
Length
None
–
BBE
–
BBE
BNC (F)
Replacement cover
Cover screws, 100/pkg
BBE = Blue Baked Enamel
4655/5255
Type
B-E
–
–
0.72 (18.29mm)
Type
Connector: B to E
Length
–
–
BNC (F)
–
–
0.72 (18.29mm)
Cover and screws included with all boxes.
B
C
D
E
1.50in
(38.10mm)
A
A
4.25in (107.95mm)
1.06in
(26.92mm) depth
Recommended Circuit Board Sizes:
4656
4.13in x 0.87in x 0.062in,
(104.9mm x 22.10mm x 1.57mm) Thick
1.38in x 0.87in x .062in
(35.05mm x 22.10mm x 1.57mm) Thick
www.pomonaelectronics.com
Boxes and Enclosures
56
“L” Size Die Cast
Aluminum Box with
Cover
Model# Finish
5203
4903
5198
4864
None
Blue Baked Enamel
Replacement cover
Cover screws, 100/pkg
3.00in
(76.20mm)
Cover and screws included.
Recommended Circuit Board Sizes:
6.00in (152.40mm)
5.88in x 1.48in x .062in,
(149.35mm x 37.59mm x 1.57mm) Thick
1.67in
(42.42mm) depth
2.88in x 1.48in x .062in,
(73.15mm x 37.59mm x 1.57mm) Thick
4903
Black Phenolic Box with Cover
Model#
2105
2259
2098
2096
Finish
Type
EGP
EGP
EGP
EGP
–
PDB
DBJ
–
EGP = Electrical Grade Phenolic
PDB = Post, Double Binding
Connector: A
Length
Type
–
0.80in (20.32mm)
–
–
–
DBP
DBP
DBP
DBJ = Double Banana Jack
DBP = Double Banana Plug
Connector: B
Length
–
0.70in (17.78mm)
0.70in (17.78mm)
0.70in (17.78mm)
Cover and screws included
with all boxes.
2259
2105
A
B
A
B
1.44in
(36.58mm)
2098
A
2096
1.75in (44.45mm)
Black Phenolic Box with Cover
Model#
2103
2099
Connector: A
Length
Finish
Type
EGP
EGP
–
BNC (M)
EGP = Electrical Grade Phenolic
DBJ = Double Banana Jack
B
–
0.85 (21.59mm)
0.69in
(17.53mm) depth
Type
–
BNC (F)
DBP = Double Banana Plug
Connector: B
Length
–
0.72 (18.29mm)
Cover and screws included
with all boxes.
2103
1.00in
(25.40mm)
A
A
2099
www.pomonaelectronics.com
B
2.25in (57.15mm)
B
1.00in
(25.40mm)
depth
Boxes and Enclosures
Black Phenolic Box with Cover
Model#
2104
2224
Finish
EGP
EGP
Connector: A
Type
Length
Type
–
DBJ
–
DBP
EGP = Electrical Grade Phenolic
DBJ = Double Banana Jack
2224
1.53in
(38.86mm)
–
–
DBP = Double Banana Plug
A
B
A
B
2.38in (60.45mm)
B
Connector: B
Length
–
0.70 (17.78mm)
Cover and screws included
with all boxes.
1.53in
(38.86mm) depth
2104
Molded Thermoplastic
Box with Card Guides
and Cover
Model# Finish
3850-0
3850-6
3850-9
4864
Black - Thermoplastic
Blue - Thermoplastic
White - Thermoplastic
Cover screws, 100/pkg
1.81in
(45.97mm)
Cover and screws included.
Recommended Circuit Board Sizes:
2.69in (68.33mm)
2.51in x 1.60in x .062in,
(63.35mm x 40.64mm x 1.57mm) Thick
1.37in
(34.80mm) depth
3850-0
Molded Thermoplastic
Box with Card Guides
and Cover
Model# Finish
4384-0
4384-6
4864
Black - Thermoplastic
Blue - Thermoplastic
Cover screws, 100/pkg
Cover and screws included.
3.16in
(80.26mm)
Recommended Circuit Board Sizes:
3.93in x 1.58in x 0.062in
(99.82mm x 40.13mm x 1.57mm) Thick
3.90in x 2.98in x 0.062in,
(99.06mm x 75.69mm x 1.57mm) Thick
4.33in (109.98mm)
1.75in
(44.45mm) depth
4384-0
www.pomonaelectronics.com
57
DMM Accessories and Kits
Connecting with the industry’s leading digital multimeter brands, Pomona
provides the world’s largest selection of test leads and probes.
Superior materials and outstanding design, assure conformity with
industry-leading reliablility and performance standards.
From high-density IC leads to voltage on a distribution panel, Pomona
connects you with the right solution.
58
Deluxe Multi-Use DMM Maxi-Kit
Model# 5677B
1. Silicone insulated 4ft (1.2m) leads with right angle plug.
2. Modular probe set with replaceable tips.
3. 5 sets of replacement tips.
4. Retractable tip test probe set.
5. Test lead coupler set.
6. Medium alligator clip set.
7. Large alligator clip set.
8. Spade lugs.
9. IC probe tip adapter.
10. Minigrabber® test clip leads.
11. Minipincer® test clip leads.
12. Nylon storage pouch.
3
10
11
5
1
6
8
7
•
•
9
•
•
2
•
12
•
4
Electronic DMM Maxi-Kit
Modular probes with interchangeable tips.
Silicone insulated 4ft (1.2m) test leads with right-angle
DMM plugs for most meters from Fluke, HP, Meterman,
Amprobe, and others.
New retractable tip probe with 3in (76.2mm) long tip
and silicone leads.
Minigrabber® and Minipincer® test clip leads attach
to test leads.
Test lead coupler connects leads to probe set for
16ft (4.8m) reach.
Nylon storage pouch with compartments for accessories.
Model# 6340
2
1. Silicone insulated 4ft (1.2m) leads.
2. Modular probe set.
3. Precision electronic probes.
4. 4 sets of replacements tips.
5. Test lead couplers.
6. Medium alligator clips.
7. Large alligator clips.
8. Minigrabber® test clip leads.
9. Minipincer® test clip leads.
10. Spade lugs.
11. Nylon storage pouch.
11
5
3
•
•
1
4
10
•
•
•
6
7
8
www.pomonaelectronics.com
9
Modular probes with caged-spring tips fit 4mm sockets.
Silicone insulated 4ft (1.2m) test leads with right-angle
DMM plugs fit most meters from Fluke, HP, Meterman,
Amprobe, Greenlee and others.
Precision Electronic probe with replacement tips offers
flexibility in testing.
Minigrabber® and Minipincer® test clip leads for smaller
test points.
Nylon storage pouch with compartments for accessories.
DMM Accessories and Kits
Deluxe Electronic DMM Test Lead Kit
1. Silicone insulated 4 ft (1.2m) leads
with right-angle plug.
2. Modular probe set with standard tips.
3. Extended probe tip adapters.
4. Medium alligator clips.
5. IC probe tip adapters.
6. Minigrabber® test clip leads.
7. Minipincer® test clip leads.
8. Maxigrabber® test clips with pincer tip.
9. Nylon storage pouch.
9
4
2
59
Model# 5674C
1
6
3
5
7
• Modular probes with standard probe
tips.
• Insulated 4ft (1.2m) test leads with
right-angle DMM plugs fit most meters
from Fluke, HP, Meterman, and others.
• Probe tip extender with 3in (76.2mm)
long tip.
• Minigrabber® test clip leads attach to
test leads.
• Minipincer® test clip leads for fine pitch
chip leads.
• Maxigrabber® test clips attach to test
leads.
• Nylon storage pouch with compartments for accessories.
8
Electronic DMM Test Lead Kit
Model# 5543B
1. Silicone insulated 4ft (1.2m) test.
leads with right-angle DMM plugs.
2. Modular electronic test probes with
standard tips.
3. Extended fine-tip probe adapter -red.
4. Medium alligator clip -black.
5. IC probe tip adapter -red.
6. Insulated spade lug -black.
7. Minipincer® test clip lead -red.
8. Minigrabber® test clip lead -red.
9. Nylon storage pouch.
8
4
9
7
• Silicone insulated 4ft (1.2m) test
leads fit meters from Fluke, HP,
Meterman, and others.
• Modular electronic test probes attach
to leads.
• Extended fine-point adapter attaches
to probe tips.
• IC adapter attaches to probe for
secure probing on chip leads.
• Minipincer® test clip lead for fine pitch
chip leads.
• Minigrabber® test clip lead extend the
reach of the test leads.
2
3
1
5
6
Basic Electronic DMM Test Lead Kits
1
2
Model#
Plug Type
Ratings
6343
5672A
6344
5325A
6456
Right-angle DMM plugs
Right-angle banana plug
Straight DMM plugs
Stacking banana plugs
Retractable sheath banana plug
UL IEC1010, CAT III 1000V
33 Vac/70 Vdc
UL IEC1010, CAT III 1000V
33 Vac/70 Vdc
UL IEC1010, CAT III 1000V
1. Comfort-grip DMM test probes.
2. Silicone insulated 4ft (1.2m) leads.
3. Extended probe tip adapters.
4. Alligator clip probe tip adapters.
5. Plastic storage case (not shown).
Note: Model 5672A has HEAVY-DUTY
stainless-steel tips.
See page 66 for banana plug types.
• Featuring Pomona’s new comfort-grip
probes.
• Monolithic probes with fixed tips.
• DMM plugs fit most meters from
Fluke, Meterman, HP, Amprobe,
Greenlee, and others.
• Extended tip adapter has sharp
needle point.
• Alligator clip adapter snaps onto the
probe tip.
4
3
www.pomonaelectronics.com
DMM Accessories and Kits
60
Deluxe Electronic Bench DMM Test Lead Kit
5
Features
Ratings
6204A
Straight DMM plugs
CAT III, 600V per IEC 1010-2-031
1. Silicone insulated 4ft (1.2m) test
leads with straight DMM plugs.
2. Modular electronic test probes with
standard tips.
3. Extended fine-tip probe adapters.
4. Medium alligator clips.
5. IC lead probe tip adapters.
6. Insulated spade lugs.
7. Minipincer® test clip leads.
8. Minigrabber® test clip leads.
9. Nylon storage pouch.
2
3
Model#
1
8
7
• Silicone insulated 4ft (1.2m) leads fit
meters from Fluke, HP (Agilent),
Keithley and others.
• Modular electronic test probes attach
to leads.
• Extended fine-point adapters attach
to probe tips.
• IC adapters attach to probes for
secure probing on chip leads.
• Minipincer® test clip leads for fine
pitch chip leads.
• Minigrabber® test clip leads extend
the reach of the test leads.
6
4
9
Electronic Bench DMM Test Lead Kit
Model# 5901B
1. Silicone insulated 4ft (1.2m) test
leads with straight DMM plugs.
2. Modular electronic test probes with
replaceable tips.
3. 5 sets of replacement probe tips
4. Medium alligator clips.
5. Insulated spade lugs.
6. Minigrabber® test clip leads.
7. Nylon storage pouch.
6
1
3
5
7
4
• DMM plugs fit meters from Fluke,
HP (Agilent), Keithley and others.
• Modular electronic test probes
with replaceable tips adapt to many
different modes.
• Replacement probe tips offer a wide
variety of probing solutions.
• Alligator clips attach to test lead for
reliable connections.
• Spade lugs attach to test leads for
binding posts or terminal screws.
• Minigrabber® test clip leads extend
the reach of the test leads.
• Uses 080 probe tips, see page 14 for
replacement tips.
• Rated CAT II 600V 10A.
2
Deluxe Automotive DMM Test Lead Kit
Mode# 6530A
1. Silicone insulated 4ft (1.2m) test
leads with right-angle DMM plugs.
2. Heavy-duty modular test probes
with stainless-steel tips.
3. Heavy-duty alligator clips.
4. Insulation piercing clips.
5. Maxigrabber® test clips with
alligator jaws.
6. Maxigrabber® test clips with hook.
7. Backprobe pins.
8. Nylon storage pouch.
8
5
3
2
6
4
7
1
www.pomonaelectronics.com
• Alligator clips attach to test lead for
reliable connections.
• Sharp stainless-steel probe tips resist
wear.
• Insulation piercing clips make
connections without stripping
insulation from wires.
• Backprobe pins access contacts
through the back side of automotive
connectors.
• DMM plugs fit meters from Fluke,
Meterman, Amprobe, Greenlee and
others.
• Maxigrabber® test clips with alligator
jaws for quick and easy connections.
DMM Accessories and Kits
61
Industrial/Automotive DMM Test Lead Kit
Model# 5903A
1. Silicone insulated 4ft (1.2m) test
leads with right-angle DMM plugs.
2. Heavy-duty modular test probes.
3. Heavy-duty alligator clips.
4. Insulation piercing clips.
5. Maxigrabber® test clips with
alligator jaws.
6. Nylon storage pouch.
5
6
1
• DMM plugs fit meters from Fluke,
Meterman, Amprobe, Greenlee and
others.
• Sharp stainless-steel probe tips resist
wear.
• Alligator clips attach to test lead for
reliable connections.
• Insulation piercing clips make connections without stripping insulation
from wires.
• Maxigrabber® test clips with alligator
jaws for quick and easy connections.
2
3
4
Deluxe Electrical DMM Test Lead Kit
6
2
7
5
1
4
Model#
Plug Type
Ratings
5904A
Right-angle DMM plug
CAT III 1000V per IEC 1010-2-031
1. Silicone insulated 4ft (1.2m) test
leads.
2. Modular electrical test probes with
stainless-steel tips.
3. Maxigrabber® test clips with jaws.
4. Maxigrabber® test clips with hooks.
5. Maxigrabber® test clips with pincers.
6. Large alligator clips.
7. Nylon Storage pouch.
• DMM plugs fit meters from Fluke,
Meterman, Amprobe, Greenlee and
others.
• Alligator clips attach to the test leads
for secure connections.
• Maxigrabber® test clips attach to test
leads.
• Nylon storage pouch to contain all kit
components.
3
Electrical DMM Test Lead Kit
3
6
1
4
2
Model#
Ratings
5673B
CAT III 1000V per IEC 1010-2-031
1. Silicone insulated 4ft (1.2m) test
leads with right-angle DMM plugs.
2. Modular electrical test probes with
stainless-steel tips.
3. Extended tip probe adapters.
4. Insulated spade lugs.
5. Medium alligator clips.
6. Large alligator clips.
7. Nylon storage pouch.
• DMM plugs fit meters from Fluke,
Meterman, Greenlee, Amprobe and
others.
• Spade lugs connect to test leads and
can be secured to binding posts or
terminals.
• Alligator clips plug into the test leads.
5
7
www.pomonaelectronics.com
DMM Accessories and Kits
62
Basic Electrical DMM Test Lead Kit
Model#
Plug Type
Ratings
5900A
Right-angle DMM plug
CAT III 1000V per IEC 1010-2-031
1. Silicone insulated 4ft (1.2m) test
leads with right-angle DMM plugs.
2. Modular electrical test probes with
standard tips.
3. Maxigrabber® test clips.
4. Nylon storage pouch.
4
1
• DMM plugs fit meters from Fluke,
Metermam, Greenlee, Amprobe and
others.
• Maxigrabber® test clips with jaws
attach to test leads.
• Nylon carrying pouch included.
3
2
Multi-Use DMM Test Lead Kit
Ratings
5899A
CAT III 1000V per IEC 1010-2-031
1. Silicone insulated 4ft (1.2m) test
leads with right-angle DMM plugs.
2. Modular electrical test probes with
standard tip.
3. Maxigrabber® with pincer tips.
4. Medium alligator clips.
5. Nylon storage pouch.
5
4
3
Model#
• DMM plugs fit meters from Fluke,
Meterman, Greenlee, Amprobe and
others.
• Alligator clips attach to test lead for
reliable connections.
• Maxigrabber® test clips with
pincers for quick and easy
connections.
1
2
Deluxe Industrial Test Companion™ Kit
Model# 6173A
Includes shoulder-pack style Cordura carrying
case plus the following IEC1010 compliant test
accessories:
8
4
9
6
2
3
1. Modular Electrical Test Probe Set with Banana
Plug Tip.
2. Flexible Test Lead Set with Right-Angle and
Straight Banana Plugs.
3. Probe Lead Set with Sharp Stainless Steel Tip.
4. Maxigrabber® Test Clip Set with Pincer Tip.
5. Maxigrabber® Test Clip Set with Hook Tip.
6. Maxigrabber® Test Clip Set with Jaws.
7. Extra Large Alligator Clip Set.
8. Medium Alligator Clip Set.
9. Insulated Spade Lug Sets (2).
5
7
1
www.pomonaelectronics.com
See page 64 for more Test Companion Kits.
DMM Accessories and Kits
Deluxe Electronic Test Companion™ Kit
Model# 6345
Includes large briefcase style Cordura carrying case
plus the following test accessories:
8
5
7
6
3
1
4
12
2
10
1. Modular Electronic Probe Set with Replaceable Tip.
2. Assorted Replacement Tips.
3. Flexible Test Lead Set with Right Angle and
Straight Banana Plugs.
4. SMD Test Tweezer® to Banana Plugs.
5. Minigrabber® Test Clip Leads.
6. Minipincer® Test Clip Leads.
7. Micrograbber® Test Clip Leads.
8. SMD Grabber® Test Clip Leads.
9. Medium Alligator Clip Set.
10. Slide-on Extended Tip Set.
11. Slide-on IC Tip Set.
12. Spade Lug Adapter Set.
9
11
Industrial Test Companion™ Kit
Model# 6172A
Includes shoulder-pack style Cordura carrying
case plus the following IEC1010 compliant test
accessories:
4
1
6
5
7
1. Modular Electrical Test Probe Set with Banana
Plug Tip.
2. Flexible Test Lead Set with Right-Angle and
Straight Banana Plugs.
3. Probe Lead Set with Sharp Stainless Steel Tip.
4. Maxigrabber® Test Clip Set with Pincer Tip.
5. Maxigrabber® Test Clip Set with Hook Tip.
6. Medium Alligator Clip Set.
7. Insulated Spade Lug Set.
3
2
Electronic Test Companion™ Kit
Model# 6174
Includes shoulder-pack style Cordura carrying case
plus the following test accessories:
1
6
10
5
9
3
7
1. Modular Electronic Probe
Set with 0.080in (2.03mm) diameter tip.
2. Flexible Test Lead Set with Right-Angle and
Straight Banana Plugs.
3. SMD Test Tweezer® to Banana Plugs.
4. Minigrabber® Test Clip Leads
5. Micrograbber® Test Clip Leads.
6. SMD Grabber® Test Clip Leads.
7. Medium Alligator Clip Set.
8. Slide-on Extended Tip Set.
9. Slide-on IC Tip Set.
10. Spade Lug Adapter Set.
2
4
8
See page 64 for more Test Companion Kits.
www.pomonaelectronics.com
63
DMM Accessories and Kits
Test Companion Kits include your favorite probes, clips, and leads in
their own specially designed carrying case. Select from the following table.
6345
6237
6200
•
6175
•
6174
•
6173A
•
6172A
•
6171
6163
•
6166
6162
Model#
6120
Kit Model#
6112A
64
Page
Test Probes
5689A Probe with Replaceable Tip
5906A Probe with 0.16in (4mm) Banana Tip
6232A Probe with 0.080in (2.03mm) Brass Tip
Test Leads
•
•
5678 SMD Test Tweezers with DMM Plugs
5898 Right-Angle Banana/Probe
5907A Straight/Right-Angle Banana
5908A Straight/Straight Sheath Banana Plugs
Alligator Clips
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
67
67
67
•
70
66
67
67
•
•
•
5916A Medium Alligator Clips (2)
6041B Large Alligator Clips (2)
Grabbers
•
•
•
•
5910B Maxigrabber Set with Pincer Tips (2)
5911B Maxigrabber with Hook Tip Set
5912B Maxigrabber Alligator Clip Set
Patch Cords
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6242 Micrograbber to Banana Plug
6243 SMD Grabber to Banana Plug
6244 Minigrabber to Right-Angle Sheathed Banana Plug
6248 Minigrabber to Sheathed Banana Jack
Oscilloscope Probes
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
—
—
•
•
84
84
•
79
82
•
•
5133 Probe Tip Stainless Steel, Dog Leg Micro (2)
5246 IC Test Tip Adapter
•
•
5682 Extended Tip Adapter
6262 Extended Tip Adapter
6263 IC Test Tip Adapter
Spade Lug Adapters
•
•
•
•
6203 Insulated Spade Lug
Coaxial Cable Assemblies/Adapters
•
•
70
•
69
69
69
•
•
•
•
•
69
•
•
2249 BNC (M) Cable Assembly
3788 BNC (M) to Minigrabber Adapter
Carrying Cases
10
17
•
5955 Tri-fold Pouch
6146 Briefcase
6147 Medium Shoulder-pack
•
•
•
•
Pomona’s Test
Companion™ Accessory
Cases and Pouches
Model#
Description
6146
Briefcase style with
carrying strap
Medium shoulder-pack
with carrying strap
Folding case with Velcro
6147
5955
6147
5955
www.pomonaelectronics.com
•
•
•
•
69
68
68
68
68
•
•
4550B Oscilloscope Probe
6035 Oscilloscope Probe, Fully Insulated Switchable
Probe Tips/Tip Adapters
6146
•
•
•
64
64
64
Precision Electronic Test Probe Set
4.3in (109.22mm)
1
2
3
4
5
Safety 2mm/4mm
Test Probe Set
Model#
Ratings
6601
IEC1010 1000V CAT III
65
Model# Features
Ratings
6341
6342
6275
6354
IEC1010 CAT III 1000V*
CAT III 1000V
CAT III 1000V
Probe set with complete set of 5 tips
Probe set with sharp point gold pogo pin tips
Probe set with sharp stainless steel rigid tips
Replacement probe tips. Set of 5 types.
• Replaceable 0.04in (1.52mm)
pogo-pin tips.
• Small outline for tight test situations.
• Replaceable pogo-pin tips.
• Comfort-grip textured surface.
• Fits all meters including Fluke, HP
(Agilent), Keithley, Meterman and
others.
• Silicone insulated leads resist abrasion
and heat.
Replacement Tips
1. Sharp-point gold pogo-pin.
2. Tri-point gold pogo-pin.
3. Quad-point gold pogo-pin.
4. Sharp stainless steel rigid.
5. 5.3in (134.6mm) long extended.
Stainless steel.
*except when used with 3in (76.2mm) tip which
is 33Vrms/70Vdc.
See page 64 for more probe tips.
Retractable Needle
Tip Test Probes
• Versatile 2mm probe tip with
screw-on 4mm tip.
• Each probe includes Protective Cap
designed to meet Guidance Note
GS38.
• Silicon insulated 4ft (1.2m) test
leads with right-angle DMM plugs.
• Comfort-grip textured surface.
Model#
Plug Type
Ratings
5953A
5952A
Right-angle DMM
Stacking banana
CAT II 600V*
600V**
*per IEC1010
• Silicone insulated 4ft (1.2m) leads fits most
meters from Fluke, Meterman, HP, Amprobe,
Greenlee and others.
• Fully insulated tip extends to 3in (76.2mm).
• Durable 0.040in (1.02mm) stainless-steel
needle tips reach into inaccessible areas.
• Set of 2 probes, one black and one red.
See page 63 for banana plug types.
**Ratings: Hands free testing in controlled environments: 600 Vrms Max. For CE compliance: not intended
for hand held use at voltages above 33 Vrms/70 Vdc.
Test Probes with Screw-on
Alligator Clips
Model# Ratings
6723
IEC1010 1000V CAT III
20A (probe alone)
IEC1010 300V, CAT II 10A
(with alligator clip
attached) 10A
• Probe set includes 2 screw-on
alligator clips.
• 8-32 threaded tips allow secure.
attachment of alligator clips.
• Silicon insulated 4ft (1.2m) test
leads with right-angle DMM plugs.
• Comfort-grip textured surface.
• Wide temperature range of
14 to 131°F (-10 to +55°C).
Additional Screw-on
Alligator Clip Set for 6723
AC Voltage Detector
and Flashlight
Model# 7290
AC Voltage Detector – Detects voltages from
40VAC to 300VAC from 1 to 15 inches away from
the source. Flashlight feature includes ultra-bright
white LED with 100,000 hour bulb. Offers long
battery life with standard alkaline AAA battery. No
lithium battery needed.
Model# Ratings
6726
300V, CAT II 10A
• Set of 2 screw-on alligator clips.
• Designed for use with 8-32-UNC 2A
threaded probe like the Pomona
6723.
• 8-32 threaded tips allow secure
attachment of alligator clips.
• Wide temperature range of
14 to 131°F (-10 to +55°C).
www.pomonaelectronics.com
DMM Accessories and Kits
66
Replacement DMM Test Lead Sets with
Fixed Tips
5.5in (139.7mm)
Model# Features
Plug Type
Ratings
5519A
6365
6366
5898
5309A
5517A
Right-angle DMM (1)
Straight DMM (2)
Retractable sleeve (5)
Right-angle DMM (1)
Stacking banana (3)
Right-angle Simpson Plugs (1)
CAT III 1000V*
CAT III 1000V*
CAT III 1000V*
CAT III 1000V*
1000V**
1000V**
Standard tip Nickel/brass
Standard tip Nickel/brass
Standard tip Nickel/brass
Stainless steel heavy-duty tip
Stainless steel heavy-duty tip
Standard tip Nickel/brass
*per IEC1010-2-031
•
•
•
•
Probe Kit with Full Set of 5
0.060in (1.52mm) Replacement Tips
Monolithic probes with fixed tips.
Durable 080 tips for long life.
Comfort-grip probe.
Silicone insulated 4ft (1.2m) leads fit
most DMMs from Fluke, HP (Agilent),
Meterman, Amprobe, Greenlee and
others.
For Plug Type, see below.
**Ratings: Hands free testing in controlled
environments: 1000 Vrms Max. For CE compliance:
not intended for hand held use at voltages above
33 Vrms/70 Vdc.
Model# Description
Plug Type
Ratings
5676A
Right-angle DMM (1)
CAT III 1000V*
Hand held DMM probe set
4.85in (123.19mm)
• Two test probes with a full set of all
5 probe tips (10 tips total).
• Silicone insulated 4ft (1.2m) leads.
• 0.06in (1.52mm) tip diameter.
Replacement Tips
*per IEC1010-2-031
1. Sharp gold-plated plunger tip.
2. Triple-point gold-plated pogo pin.
3. Gold plated micro tip pogo.
4. Stainless-steel sharp-point.
5. Standard brass.
See page 70 for more probe tips.
1
**Ratings: Hands free testing in controlled
environments: 1000 Vrms Max. For CE compliance:
not intended for hand held use at voltages above
33 Vrms/70 Vdc.
2
3
4
5
Replaceable Tip Probes
4.85in (123.19mm)
Model# Probe Tip
Plug Type
Ratings
6469
6470
6472
6477
5950A
5951A
Right-angle DMM (1)
Straight DMM (2)
Stacking banana (3)
Right-angle DMM (1)
Straight banana (4)
Right-angle banana (6)
CAT III 1000V*
CAT III 1000V*
1000V**
CAT III 1000V*
1000V**
1000V**
Gold-plated Microtip pogo
Gold-plated Microtip pogo
Gold-plated Microtip pogo
Stainless-steel sharp-point
Stainless-steel sharp-point
Nickel-plated brass
*per IEC1010-2-031
1
• New 0.06in (1.52mm) diameter solid
and pogo-pin probe tips can be easily
replaced without tools making this
versatile probe the perfect tool for nearly
every test.
• Comfort-grip probe handle.
Replacement Tips
2
3
4
5
1. Sharp gold-plated plunger tip.
2. Triple-point gold-plated pogo pin.
3. Gold-plated micro tip pogo.
4. Stainless-steel sharp-point.
5. Standard brass.
See page 70 for more probe tips.
**Ratings: Hands free testing in controlled
environments: 1000 Vrms Max. For CE compliance: not intended for hand held use at voltages
above 33 Vrms/70 Vdc.
Plug Types
1. Right-angle DMM plug*
2. Straight DMM plug*
3. Stacking banana plug
4. Straight banana plug
5. Retractable sleeve banana plug
6. Right-angle banana plug
* Shrouded DMM plugs fit most DMMs
from Fluke, Meterman, HP (Agilent),
Amprobe, Greenlee and others.
1
www.pomonaelectronics.com
2
3
4
5
6
DMM Accessories and Kits
Replacement DMM Test Leads
Choose plug for this
end from below
Model#
Application
Features
Ratings
5907A
Hand held DMM modular
test leads
Bench-top DMM modular
test leads
Hand held DMM modular
test leads
Universal DMM test leads
Right-angle DMM plug (1)
CAT III 1000V*
Straight DMM plugs (2)
CAT III 1000V*
Right-angle DMM
plug at both ends (1)
Retractable sheath
DMM plugs (3)
CAT III 1000V*
5908A
5909A
6358
CAT III 1000V*
*per IEC1010-2-031
• Leads for Pomona Modular Test Probes.
• Plugs fit most popular DMMs from Fluke,
Meterman, HP (Agilent), Amprobe,
Greenlee and others.
• Silicone insulated 4ft (1.2m) leads.
• Retractable sleeve plug fits all banana
jacks, binding posts and DMM input
jacks.
Plugs into
probes below
1
2
6479
**Ratings: Hands free testing in controlled
environments: 1000 Vrms Max. For CE compliance:
not intended for hand held use at voltages above
33 Vrms/70 Vdc.
3
Replacement Modular Test Probes
6232A
Plug Types
1. Right-angle DMM.
2. Straight DMM.
3. Retractable sheath 0.16in (4mm).
Model# Probe Type
Features
Ratings
6232A
6479
Modular electrical probe
Industrial modular probe
CAT III 1000V*
CAT III 1000V*
5906A
5689A
Lantern tip
Replaceable tip
modular probe
Standard 0.08in (2.03mm) tip
Stainless-steel 0.08in (2.03mm)
sharp-point
Fits 4mm Jack
Stainless-steel 0.08in (2.03mm)
sharp-point
CAT III 1000V*
CAT III 600V*
*per IEC1010-2-031
5906A
• Modular probes fit all Pomona test leads.
• Lantern tip probes fit into banana jacks.
5689A
Replacement Modular Test Probe Sets
Model#
Description
Probe
Type
Test
Lead Type Ratings
6286
6288
6304
Standard tip with right-angle DMM plug
Stainless-steel tip with right-angle DMM plug
Lantern tip probe with right-angle DMM plug
6232A
6479
5906A
5907A
5907A
5907A
CAT III 1000V*
CAT III 1000V*
CAT III 1000V*
*per IEC1010-2-031
6232A
6479
5906A
5689A
• Modular test probes sets
contain one set of modular
probes and test leads in
one package.
• Silicone insulated 4ft
(1.2m) leads fit most
meters from Fluke,
Meterman, HP (Agilent),
Amprobe, Keithley,
Greenlee and others.
**Ratings: Hands free testing
in controlled environments:
1000 Vrms Max. For CE compliance: not intended for hand held
use at voltages above 33 Vrms/
70 Vdc.
www.pomonaelectronics.com
67
DMM Accessories and Kits
68
SMD Micro Tip/Test Probe
Model#
Color
5144-48-0
5144-48-2
6235
Black
Red
Set of two probes:
one Black and
one Red
BNC Shielded Test Probe Kit
Shield extends to within 1.5in
(3.8cm) of probe tip. Compatible
with DMM banana plug inputs
when using Pomona 1269 BNC
to double banana plug adapter.
Alligator or Minigrabber test clip
can be quickly threaded onto
ground lead. Stainless steel dog
leg tip excellent for SMD probing.
Kit includes: Shielded test probe,
Minigator with 6-32 thread for
ground lead and insulated flex boot
for Minigator, Minigrabber test clip
with 6-32 thread for ground lead,
Dog leg probe tip.
The probe microtip is specially
designed to probe SMD contacts.
It features a stainless steel needle
tip that is flexible to help prevent
damage to SMD lands. The tip is
curved to aid in probing hard to
reach areas. Black.
Ratings: Hands free testing in controlled environments: 1200 Vrms
Max. For CE compliance: not
intended for hand held use at
voltages above 33 Vrms/70 Vdc.
Maxigrabber® Test Clip Set
with Pincer
Ratings: Hands free testing in
controlled environments: 500 Vrms
Max. For CE compliance: not intended for hand held use at voltages
above 33 Vrms/70 Vdc.
Model# 5910B
Includes set of 2, one red and
one black.
Pincer Opening: 0.080in (2.03mm)
dia. test point.
Insulation Piercing
Clip Sets
Rating: Overvoltage CAT III,
1000V, 10A per IEC1010-2-031.
Maxigrabber® Test Clip Set
with Hook
Model# 5292-48
Model# Features
Colors
6405
Set of red/black
Attach to test leads
4in (10.2cm) long
6413
Attach to 0.080in
(2.03mm) Probe tip
(10.2cm) long
6580-12 12in (304.8mm) long
6580-24 24in (609.6mm)
Set of red/black
-0 blk, -2 red
-0 blk, -2 red
Model# 5911B
Includes set of 2, one red and
one black.
• Double V block centers wire
• Set of 2, (red and black jacks)
• Bright yellow for easy location
• Attach to test leads
Hook Fits Test Points to: 0.060in
(1.52mm) diameter.
Hook Opens to: 0.25in (6.5mm).
Rating: Overvoltage CAT III,
1000V, 10A per IEC1010-2-031.
Large Alligator Clip Set
Model# Color
6041B Set of 2: Black, Red
6042B-* 1 Clip
Maxigrabber® Test Clip Set
with Jaws
Model# 5912B
Fits on any DMM or banana plug test lead.
Includes set of 2, one red and one
black.
Rating: IEC1010-2-031 CAT III 1000V
20A.
Jaw Opening: 0.50in (12.70mm) dia.
Jaw Opening: 1.0in (25.40mm).
Rating: Overvoltage CAT III, 1000V,
10A per IEC1010-2-0312.
*For singles, order: -0 Black, -2 Red.
3.58in (90.9mm)
Industrial Alligator
Clip Set
Insulation Piercing
Maxigrabber® Test Clip Set
Model# 5914
Fits on any DMM or banana plug test lead.
Model# 5913
Rating: IEC1010-2-031 CAT III 600V 10A.
Includes set of 2, one red and one
black.
Jaw Opening: to 1.0in (25.40mm).
*Std. Colors: -0 Black, -2 Red.
Pierces insulation to make
connection on wire up to 0.144in
(3.66mm) diameter.
Rating: Overvoltage per IEC10102-031 CAT III, 1000V, 5A.
www.pomonaelectronics.com
3.20in (81.3mm)
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
DMM Accessories and Kits
Medium Alligator Clip Set
Model# Color
Test Lead Couplers
5916A Set of 2: Black, Red
5787A-* 1 Clip
Model# 6252
Banana plug splice.
Maintains overvoltage rating up to CAT III
1000V per IEC1010-2-031.
Fits on any DMM or banana plug test lead.
Use with any Pomona DMM test leads,
even 0.16in (4mm plugs).
Rating: IEC1010-2-031 CAT II 300V 5A.
Jaw Opening: to 0.30in. (7.62mm).
*For singles, order: -0 Black, -2 Red.
2.27in (57.7mm)
Test Probe Tip Adapters
Test Probe Tip Adapters
Application
6262-*
fits comfort-grip style and
modular probes 6232A and
6479
fits modular probe 5689A
Model# 6264-*
Alligator Clip.
5682-*
1.99in (50.42mm)
Extended Fine Point.
Attach to probe tip.
Rating: IEC1010-2-031 CAT II. 300V. 5A
Works with comfort-grip style and
modular electrical probes.
2.96in (75.2mm)
Model#
3.95in (100.3mm)
Insulated probe for hard to
reach test points.
Maximum 3A.
6262
*Std. Colors: -0 Black, -2 Red.
Std. Colors: -0 Black, -2 Red,
-02 1 ea. Black, Red.
2.0in (50.8mm)
Alligator Clip with
Boot for 0.166in (4mm)
Sheathed Banana Plug
Model#
Fits Sheathed Banana
6573A*
0.16in (4mm)
3.27in (83.1mm)
5682
Clip plugs onto 0.16in (4mm) sheathed
banana plug, as on Pomona model 5907A
test leads.
Jaw opening: 0.30in (7.6mm) max.
Materials: Alligator clip: nickel-plated
steel, Boot: Santoprene rubber.
Insulated Spade Lug
Adapters
Length: 2.91in (73.9mm).
Model# Color
6203
Set of 2: Black, Red
1614A-* 1 Clip
Rating: 1000V CAT III per IEC1010-2-031,
10A, -13 to 176°F (-25 to 80°C).
Connect banana plug patch cords to
binding posts.
*Std. Colors: -0 Black, -2 Red, -02 two
alligator clips, 1 Black, 1 Red.
Fits screws or binding posts from #10:
0.32in to 0.25in (8.13mm to 6.35mm).
Compatible with any Pomona banana jack
shrouded or unshrouded
6203
Test Probe Tip Adapters
Model# Application
6263-*
6263
Fits 5519A etc.
*For singles, order: -0 Black, -2 Red.
fits comfort-grip style
and modular probes 6232A
and 6479
IC Probe Tip.
Attach to 0.08in (2mm) probe tips.
Rating: IEC1010 CAT II, 300V, 5A.
*Std. Colors: -0 Black, -2 Red.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
www.pomonaelectronics.com
69
DMM Accessories and Kits
70
0.08 (2.03mm)
Replacement
Probe Tips
Model# Item
Features
5133
6364
SMD Microtip™ stainless-steel tip
Set of all tips
Nickel-plated standard tip
Stainless-steel sharp point
SMD Microtip™ stainless-steel tip
Sharp needle-point stainless-steel
1
2
3
Full set
1
2
3
4
0.04 (1.01mm)
Replacement
Probe Tips
Model# Item
Features
6212
6354
Quad-point gold-plated pogo pin
Set of all tips
Sharp gold-plated
Triple-point gold-plated pogo pin
Quad-point gold-plated pogo pin
Sharp stainless-steel
5.3in (134.6mm) long extended.
Stainless steel
3
Full set
1
2
3
4
5
1
2
3
3
4
4
5
0.06 (1.52mm)
Replacement
Probe Tips
Model# Item
Features
6475
Set of all tips
Sharp gold-plated plunger tip
Triple-point gold-plated pogo pin
Gold-plated micro tip pogo
Stainless-steel sharp-point
Standard brass
1
2
Full set
1
2
3
4
5
3
4
5
SMD Test Tweezer Products
Model#
0.04in (1.01mm)
Min. Closed
Features
Ratings
5143-K-48 Stacking Banana Plug 30 Vac/ 70 Vdc, 3A
5142-K-48 BNC Male
30 Vac/ 70 Vdc, 3A
5678-K-48 Right-Angle DMM Plug 30 Vac/ 70 Vdc, 3A
0.33in
(8.38mm)
Length: 48in (1.22m)
4.40in (111.76mm)
0.1in (2.54mm)
5143
RF Detector Test Probes
5142
5678
Turn-On
Model# Voltage (mV)
6106
350
Bandwidth
(MHz)
Input
Peak AC
Capacitance (pF) Input (V)
1MHz-1GHz ± 1.5 dB
6
30
DC Isolation
Incl. Peak AC (V)
100
Displays RF voltages on multimeter.
Manufactured with high reliability SMD components.
Slim-line probes will show AC voltages with sine wave shapes between 500 Hz and 1 GHz.
Display will show 1 VDC for 1 VRMS of the sine wave signal.
Comes complete with ground lead, sprung hook, BNC adapter and extra tip.
Works best on multimeters with 10 MΩ input impedance.
Cable Length: 4ft (1.2m).
www.pomonaelectronics.com
DMM Accessories and Kits
Create Your Own Test Leads for Your Own
Specific Needs with the Following:
Kelvin Probes
Model# 6303
For 4-wire and 2-wire measurements.
Test Lead Wire with
Silicone or PVC
Insulation
Model#
Insulation
Type
6733-*
6734-*
Silicone
PVC
Patented design for high precision
rapid testing.
Length
50ft (15.2m)
50ft (15.2m)
• 50ft (15.2m) of unterminated 18 AWG
test lead wire 50ft (15.2m lengths only.)
• Choose from heat-resistant silicone or
PVC insulation.
• Very flexible with 65 strands of 36 AWG
tinned copper conductor.
• Create your own test leads with the
adapters shown below.
• Wide temperature range of -58 to 302°F
(-50 to 150°C) with PVC insulation.
*Std. Colors: -0 Black, -2 Red.
Gold-plated for accuracy.
Easily move from one test point to
another for rapid readings.
For use with 4-wire Kelvin meters
such as Agilent 34401A, and 3458A.
Rating: For CE compliance: not
intended for hand held use at
voltages above 33 Vrms/70 Vdc.
Length: 48in (122cm)
Kelvin Lead Set with
Kelvin Clips
See page 32 for more do-it-yourself plugs.
Do-It-Yourself 4mm Right
Angle Banana Plug
• Gold-plated Kelvin clip jaws
allow 4-wire resistive measurements.
• Silicone insulated 3.3ft (1m)
test lead.
• Safety sheathed straight DMM
plugs for convenient bench use.
• Clips firmly grip test points for
low-loss connection.
Model# 6729
Build your own safety leads with do-it-yourself safety-sheathed 4mm right-angle
banana plug.
1.28in
(32.4mm)
Model# 6730
Material: Contacts: nickel-plated brass;
Insulation: lucel acetal polymer.
Rating: For CE compliance: not
intended for hand held use at
voltages above 33 Vrms/70 Vdc.
Rating: IEC1010 1000V Category III**,
20A, 14 to 131°F (-10 to +55°C).
*Std. Colors: -0 Black, -2 Red.
** When plug is correctly assembled and
terminated.
Do-It-Yourself 4mm
Stackable Banana Plug
2.3in (58.4mm)
Kelvin Clip Set
Model# 6721To come....
Model# 5940
Build your own safety stacking leads with
do-it-yourself safety-sheathed 4mm stackable banana plugs.
Two gold-plated clips connect
to test points for 4-wire
resistive measurement.
Material: Contacts: nickel-plated brass,
Insulation: lucel acetal polymer.
Clips open to 0.25in (6.35mm)
maximum.
Rating: IEC1010 1000V Category III**,
20A, 14 to 131°F (-10 to +55°C).
Gold-plated plugs and clips.
Rating: For CE compliance:
not intended for hand held
use at voltages above
33 Vrms/70 Vdc.
*Std. Colors: -0 Black, -2 Red.
** When plug is correctly assembled and
terminated.
Overall Length: 26.5in
(67.3cm).
Do-It-Yourself In-Line Sheathed (4mm) Banana Plug and Jack
1.44in
(36.58mm)
3.01in (76.45mm)
6383
Model#
6383-*
6383-02
6384-*
6384-02
Plug
Jack
• Safety-rated plugs and jacks for use with any wire
from 22 to 18 AWG with flexible insulation.
• Plugs fit most sheathed DMM jacks and DMM test
leads to make up your own banana plug or jack test
lead or jumper.
See mating panel jacks (6387 on page 34).
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Insulation: Santoprene®.
Attaches to wire by crimp or soldering.
6384
Rating: IEC1010 CAT II 300V, 15A, +275°F (+135°C) max.
*Std. Colors: -0 Black, -2 Red, -02 Black and Red (2 per pkg).
*Sold in pkgs of 10.
*see rating message at start of section.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
www.pomonaelectronics.com
71
Grabbers and Test Clips
Pomona Electronics’ Grabber ® Test Clips connect rapidly to component
test leads, terminals and IC leads. Specially designed tips slide easliy
onto wire-wrap terminals. And do-it-yourself Grabber test clips can be
assembled quickly and easily by the user.
72
Minigrabber® Test Clip
with Banana Jack
Minipincer
SMD Grabber
Page 73
Minigrabber
Page 72
Micrograbber
Page 73
Rotating
Micrograbber
Page 73
Model# 4723-*
Banana Jack built into plunger.
Overall Length: 2.54in (64.52mm).
Rating: Hands free testing in controlled environment: 300V*, 5A, 216˚F (+102˚C) max.
*Std Colors: -0 Black, -2 Red.
SMD
Do-It-Yourself
Minigrabber® Test Clips
0.016in - 0.02in
(0.4mm - 0.5mm)
Model#
Max. Wire Dia.
3925-*
0.090in (2.29mm)
4555-*
0.144in (3.55mm)
Temperature
216°F
(102°C)
300°F
(149°C)
Page 73
Overall Length: 2.54in (64.52).
Micro
Rating: Hands free testing in controlled environment: 300V*, 5A, +302˚F (+150˚C) max.
1.71in (43.43mm)
0.04in (1.02mm)
*Std Colors: Available in 10 colors. Sold in
pkgs of 10 per color.
Page 73
0
Micro
Model#
Features
4176-02
Kit contains 2 pcs. of 3925,
one black/one red
Kit contains 10 pcs. of 3925,
one of each color
1.71in (43.43mm)
5522
0
0.10in (2.54mm)
Page 73
Mini
Minigrabber® Test Clip
with Pin Tip Jack
A pin jack is built right into the plunger,
allowing this test clip to be attached directly
to the end of a pin tip patch cord. It can also
be used as an adapter for test probes with
0.080in (2.03mm) tips.
2.54in (64.52mm)
0.09in (2.29mm)
0.12in (3.05mm)
Overall Length: 2.54in (64.52).
Page 72
SMD
Model# 4826-*
Rating: Hands free testing in controlled environment: 300V*, 5A, +216˚F (+102˚C) max.
2.59in (65.79mm)
*Std Colors: -0 Black, -2 Red.
0.087in (2.21mm)
Page 73
Maxi
Minigrabber® Test Clip
with 6-32 Thread
Model# 4011-*
Clip can be used with oscilloscope leads
equipped with a 6-32 screw.
6.22in (158.0mm)
Overall Length: 2.54in (64.52mm)
Rating: Hands free testing in controlled environment: 300V*, 5A, +216˚F (+102˚C) max.
*Std Colors: -0 Black, -2 Red.
0.09in (2.29mm)
Page 73
Maxi
6.22in (158.0mm)
Threaded Tip
Adapter
Model# 4311
0.14in (3.56mm)
Page 73
www.pomonaelectronics.com
0
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, 5 Green, -6 Blue,
-7 Violet, -8 Gray, -9 White
Ratings: The components in this section have a hands free rating for use in controlled voltage environments.
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
Grabbers and Test Clips
Oscilloscope Probe Tip
Adapters
Model#
Probe Type
6443
6553
Monolithic Series
Modular Series
Micrograbber® Test
Clip with 0.025in
(0.635mm) Square Pin
Model#
Features
4521*
5925
Sold individually
Micrograbber w/ 0.025in
(0.635mm) Sq. Pin
Kit. Contains 10 Model 4521
clips, one of each color.
• Adapter attaches directly to the
oscilloscope probe tip.
• Designed for use with Micro SMD
Grabber Test Clips.
6553
6443
SMD Grabber® Test
Clip with 0.025in
(0.635mm) Square Pin
*Std Colors: -0 Black, -2 Red.
Model# Features
5360
5927
Sold Individually
SMD Grabber® Test Clip w/0.025in
(0.635mm) Sq. Pin Kit. Contains 10
Model 5360 clips, one of each color.
Do-It-Yourself Maxigrabber®
Test Clips
Model#
Max. Wire Dia.
4225-*
4565-*
0.090in (2.29mm)
0.144in (3.66mm)
Pincer type contact designed for testing 0.05in
(1.25mm) lead pitches such as SOJ, SOIC and
PLCC surface mounted packages.
0.15in (3.81mm) sq. access hole leads to
0.025in (0.635mm) sq. pin.
Fits entry holes as small as 0.25in
(6.35mm) dia.
Overall Length: 1.73in (43.94mm).
Overall Length: 6.00in (152.4mm).
Rating: Hands free testing in controlled environment: 150V*, 0.5A, +216˚F (+102˚C) max.
Rating: Hands free testing in controlled
environment: 300V*, 5A, +216˚F
(+102˚C) max.
*Std Colors: Available in 10 colors.
*Std Colors: -0 Black, -2 Red.
0.025in (0.635mm) Square Pin Patch Cords
available, see page 50.
Do-It-Yourself SMD
Grabber® Test Clips
Model#
Features
5520
Kit containing 10 pcs of
5243 one of each color
For hook dimensions see page 72.
Do-It-Yourself Flexible
Maxigrabber® Test Clips
Model# 5830-*
Pincer type contact designed for testing 0.05in
(1.27mm) lead pitches such as SOJ, SOIC and
PLCC surface mounted packages.
Overall Length: 1.71in (43.43mm).
Wire Opening: 0.09in (2.29mm) dia. max.
Rating: Hands free testing in controlled environment: 150V*, 0.5A, +216˚F (+102˚C) max.
Colors: -0 Black, -2 Red, -5 Green.
Rotating pincer type contact for easier
access. Standard banana jack and
screw for direct wire termination.
Overall Length: 6.22in (157.9mm).
Rating: Hands free testing in controlled
environment: 250V*.
Do-It-Yourself
Micrograbber® Test
Clips
Model# Features
*Std Colors: -0 Black, -2 Red.
4233-*
5524
For pincer dimensions see page 72.
Sold in pkgs of 10 per color
Kit containing 10 pcs of 4233,
one of each color
Overall Length: 1.71in (43.43mm).
Material: Gold plated brass
Rating: 150V, 3A, +216˚F (+102˚C) max.
*Std Colors: Available in 10 colors.
For hook dimensions see page 72.
*see rating message at start of section.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
www.pomonaelectronics.com
73
Grabbers and Test Clips
74
Insulated Minigator
Test Clip to Pin
Tip Jack
Model# 3491-*
Jaw Opening: Alligator clip has 0.187in
(4.75mm) max.
Alligator Test Clip to
Pin Tip Jack with
Insulator
Model# 1437-*
Jaw Opening: Alligator clip has 0.30in
(7.62mm) max.
Overall Length: 2.05in (52.07mm).
Accepts 0.08in (2.03mm) dia. pin.
Rating: Hands free testing in controlled
environment: 45V*, 5A, +122˚F (+50˚C) max.
Overall Length: 2.16in (54.86mm).
Rating: Hands free testing in controlled environment: 150V*, 5A, +122˚F (+50˚C) max.
*Std Colors: -0 Black, -2 Red.
*Std. Colors: -0 Black, -2 Red.
Sold in pkgs of 10 per color.
Do-It-Yourself
Minipincer® Test Clip
(Sold unassembled) 10 clips and
10 insulators per pkg.
Model# 5418-*
Pincer type contact.
Overall Length: 2.59in (65.79mm).
Rating: Hands free testing in controlled
environment: 300V*, 5A, +176˚F (+80˚C) max.
Large Alligator Clip Set
Model#
Features
6041B
Set of 2 Clips Black and Red
6042B-* 1 Clip
*Std Colors: -0 Black, -2 Red, -4 Yellow,
-5 Green, -6 Blue.
Insulated clip with sheathed 0.16in (4mm)
receptacle accepts flexible lead sets 5907A,
5908A and 5909A (p. 64).
Jaw Opening: 1.0in (25.40mm) max.
Medium Alligator
Clip Set
Model#
Features
Overall Length: 3.5in (88.90mm).
5916A
Set of 2 Clips Black and Red
Rating: Conforms to IEC1010-2-031,
Overvoltage Cat III, 1000V, 20A max.
Insulated clip with sheathed 0.16in (4mm)
receptacle accepts flexible lead sets 5907A,
5908A, 5909A (p. 64).
*Std. Colors: -0 Black, -2 Red.
Jaw Opening: 0.30in (7.62mm) max.
Overall Length: 2.25in (57.15mm).
Rating: Conforms to IEC1010-2-031,
Overvoltage Cat II, 300V, 5A max.
Alligator Clip with
Boot for 0.166in (4mm)
Sheathed Banana Plug
Model#
Fits Sheathed Banana
6573A*
0.16in (4mm)
Clip plugs onto 0.16in (4mm) sheathed
banana plug, as on Pomona model 5907A
test leads.
Jaw opening: 0.30in (7.6mm) max.
Miniature Alligator Test
Clip with 2mm Banana
Jack
5788-*
Materials: Alligator clip: nickel-plated steel,
Boot: Santoprene rubber.
Jaw Opening: 0.24in (6.10mm) max. .
Length: 2.91in (73.9mm).
Overall Length: 1.57".
Rating: 1000V CAT III per IEC1010-2-031,
10A, -13 to 176°F (-25 to 80°C).
Rating: 45V, +80˚C (+176˚F) max.
*Std. Colors: -0 Black, -2 Red.
*Std. Colors: -0 Black, -2 Red, -02 two
alligator clips, 1 Black, 1 Red.
Sold in pkgs of 10 per color.
Mini-alligator Clip
with 2mm Jack
Model#
Color
72924-0
72924-2
Black
Red
Alligator Test Clip
to Banana Jack,
with Insulator,
Solderable
Model#
Plating
Features
3289-*
2240-*
6567
Gold
Nickel
Nickel
1 clip and insulator/pkg.
10 clips and insulators/pkg.
10 clips w/o insulators/pkg.
Rating: 600V Cat II, 10A.
Jaw Opening: Alligator clip has 0.30in
(7.62mm) max.
Overall Length: 2.16in (54.86mm).
Rating: Hands free testing in controlled
environment: 150V*, 5A, +122˚F (+50˚C) max.
*Std Colors: -0 Black, -2 Red.
Sold unassembled.
www.pomonaelectronics.com
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
*see rating message at start of section.
SMD / Micro Format Test
Components and circuit boards are getting smaller and smaller. Pomona
makes your job easier by providing clips and leads designed for micro-test,
including a variety of 2mm connectors for use in tight spaces. From clips
designed for chip pitches down to 0.008" (0.2 mm), to patch cords, and even
complete SMD test kits, Pomona has the connection you need.
75
SMD Multi-Use Test Kit
Model# 72928
SMD test kit designed for multiple test small format test applications.
Kit includes:
1. 72902-0
Micro SMD Grabber Test Clips, (Black)
2. 72902-2
Micro SMD Grabber Test Clips, (Red)
3. 72906-0
Mini SMD Grabber Test Clips, (Black)
4. 72906-2
Mini SMD Grabber Test Clips, (Red)
5. 72905-0
Clip lead for Micro SMD Grabber - 0.8mm female/4 mm female, (Black)
6. 72905-2
Clip lead for Micro SMD Grabber - 0.8mm female/4 mm female, (Red)
7. 5908A
Bench-top DMM Modular Test leads
8. 72920-39-0 stacking 2mm safety sheathed patch cords, PVC, 39in (100mm), (Black)
9. 72920-39-2 Multi-stacking 2mm safety sheathed patch cords, PVC, 100mm (39in), (Red)
10. 72923-0
SMD test probe with sharp, spring mounted tip, 2mm jack, (Black)
11. 72923-2
SMD test probe with sharp, spring mounted tip, 2mm jack, (Red)
12. 72917-0
4mm banana plug to 2mm sheathed banana jack adapter,10/pkg (Black)
13. 72917-2
4mm banana plug to 2mm sheathed banana jack adapter,10/pkg (Red)
14. 72924-0
Mini-alligator clip with 2mm jack, (Black)
15. 72924-2
Mini-alligator clip with 2mm jack, (Red)
Large Folding Test Kit Pouch
SMD High Density Circuit Test Kit
Model# 72935
SMD test kit designed for probing high
density circuits.
Kit includes: 2 DMM leads with 4mm
plugs, 2 test probes with spring-loaded tips,
6 micro SMD grabbers (72902), 6 adapter
leads 0.8mm female to 0.4mm jack, 2 mini
SMD grabbers with 4mm connectors,
2 holding rods (72903).
www.pomonaelectronics.com
SMD / Micro Format Test
76
Micro SMD Grabber
Test Clips Kit
Model#
Includes
72902
12 clips, 12 leads, 6 rods
Clip lead for Micro SMD
Grabber 0.8mm /2mm
Kit of 12 Micro SMD Grabbers in 6 colors.
Grabbers are designed for easy attachment
to SMD chips with pitches down to 0.008"
(0.20 mm). Thin yet durable design permits attachment with close spacing in tight
areas. Insulated tip minimizes shorting on
adjacent pins. Gold plating for low resistance connections. Kit also includes
6 holding rods to reinforce connection
positions during side-by-side measurements (order Model# 72903). In addition,
kit includes 12 micro leads with 0.8mm
female / 0.8mm male connectors.
Model#
Color
72902-0
72902-2
Singles - Black
Singles - Red
Designed for easy attachment to SMD
chips with pitches down to 0.008” (0.20
mm). Thin yet durable design permits
attachment with close spacing in tight
spaces. Insulated tip minimizes shorting
on adjacent pins. Gold plating for low
resistance connections. Holding rods
available to reinforce connection positions
during side-by-side measurements
(order Pomona model number 72903).
Order Pomona model number 72905-0 for
clip lead for Micro SMD Grabber - 0.8mm
female/4 mm female (black) or 72905-2
(red) for easy attachment to standard test
leads. 72902 includes one black and one
red clip. (Black).
Holding Rods for
Micro SMD Clips
Black
Red
Model#
Color
72905-0
72905-2
Black
Red
Clip lead for easy attachment of Micro SMD
Grabber (Pomona 72902) or Mini SMD
Grabber (Pomona 72906) to standard test
leads. 0.8mm female/4 mm female.
Mini SMD Grabber
Test Clips
Model#
Color
72906-0
72906-2
Black
Red
Designed for easy attachment to SMD
chips with pitches down to 0.032" (0.80
mm). Insulated shaft can be bent up to 36
degrees for versatile attachment in awkward locations or close proximity to other
clips. Rotating jaws increase versatility in
connection and stacking. Thin (3mm) profile allows close placement to adjacent
clips. Compatible with leads with Ø0.8 mm
female connectors. Order Pomona model
number 72905-0 for clip lead for SMD
Mini Grabber – 0.8mm female/4 mm
female (black) or 72905-2 (red) for easy
attachment to standard test leads.
Model# 72903
Holding rods reinforce 72902 connection
positions during side-by-side measurements. (10/pkg).
Mini SMD Grabber
Test Clip with
Lead and
2mm Jack
www.pomonaelectronics.com
Color
72904-0
72904-2
Clip lead for easy attachment of Micro
SMD Grabber to test leads with 2mm
plugs. 0.8mm female/2 mm female.
Clip lead for Micro SMD
Grabber 0.8mm /4mm
Micro SMD Grabber
Test Clips
Model#
Model#
Color
72907-20-0
72907-20-2
Black
Red
Mini SMD Grabber Test Clip (Pomona
72906) with 20 inch (50cm) lead and
2mm Jack.
SMD / Micro Format Test
Mini SMD Grabber
Test Clip with
Lead and
4mm Jack
SMD Test Probe
with Sharp, Spring
Mounted Tip
Model#
Color
72929-20-0
72929-20-2
Black
Red
Do-it-yourself 2mm
Stackable Safety
Sheathed Plug
Color
72923-0
72923-2
Black
Red
Color
72925-0
72925-2
Black
Red
77
Rating: 600V Cat II 10A.
Mini SMD Grabber Test Clip (Pomona
72906) with 20 inch(50cm) lead and 4mm
Jack for easy attachment to DMM leads.
Model#
Model#
Mini-alligator Clip
with 2mm Jack
Model#
Color
72924-0
72924-2
Black
Red
Rating: 600V Cat II, 10A.
SMD test probe with sharp, spring mounted tip and 2mm jack. Provides ultra-fine
control for probing high density SMD
circuits. Very fine 0.03in (0.7mm) diameter stainless steel tip is spring-mounted
for controlled pressure. Removable, clear
IC insulator cap prevents shorting of adjacent IC loges. Sheathed 2mm receptacle
adapts to 2mm test leads and adapters.
Rating: 600V Cat III, 1A.
Multi-stacking 2mm
Safety Sheathed
Patch Cords
Model#
Length
Color
72920-20-0
72920-20-2
72920-39-0
72920-39-2
20in (50cm)
20in (50cm)
39in (100cm)
39in (100cm)
Black
Red
Black
Red
Multi-stacking 2mm safety sheathed
male/male patch cords, PVC.
2mm Safety Sheathed
Patch Cords
Model#
Length
Color
72919-20-0
72919-20-2
72919-39-0
72919-39-2
20in (50cm)
20in (50cm)
39in (100cm)
39in (100cm)
Black
Red
Black
Red
2mm safety sheathed male/male patch
cords, PVC, .
Rating: 600V Cat II, 10A Max.
2mm/4mm Male-male Test Leads
Model#
Length
72936-0
72936-2
39in (991mm) Black
39in (991mm) Red
Color
www.pomonaelectronics.com
SMD / Micro Format Test
78
4mm Safety Banana
Jack to 2mm Banana
Plug Adapter
Model#
Color
72914-02
72914-0
72914-2
One Black and One Red
Black
Red
Accepts 4mm safety-sheathed banana
plugs. 10/pkg.
Rating: 33 Vac / 70 Vdc, 36A
Micro SMD
Grabber® Test
Clip for 0.05
to 0.01in (1.25
to 0.2 mm)
Lead Pitch
Profile
Model# Height
6442
6311
6351
6312
6352
6313
2mm Sheathed Jack to
2mm Unsheathed
Plug Adapter
Model#
Color
72915-0
72915-2
Black
Red
6353
Lead Pitch
Tip
0.28in
0.05 - 0.01in Long
(7mm) low (1.25 - 0.3mm)
0.55in
0.03in - 0.01in Long
14mm
0.85 - 0.2mm
0.55in
0.03in - 0.01in Long
14mm
0.85 - 0.2mm
0.55in
0.05 - 0.01in Long
14mm
1.25 - 0.3mm
0.55in
0.05 - 0.01in Long
14mm
1.25 - 0.3mm
0.55in
0.05 - 0.01in Short
14mm
1.25 - 0.3mm
0.55in
0.05 - 0.01in Short
14mm
1.25 - 0.3mm
Qty Colors
10
10
2
2
10
2
2
2
10
2
2
2
10
2
• Use with PQFP, SOIC, TSOP and SSOP
packages with lead pitches down to
0.01 to 0.02in (0.2 to 0.5 mm).
Accepts 2mm safety-sheathed banana
plugs. 10/pkg.
• Thin body allows an unlimited number
of clips to be stacked side by side.
Rating: 33 Vac / 70 Vdc, 10A.
• Maximum frequency is 100MHz.
4mm Banana Jack to
2mm Banana Jack
Adapter
Model#
Color
72916-0
72916-2
Black
Red
Accepts 2mm and 4mm safety-sheathed
banana plugs. 10/pkg.
Rating: 33 Vac / 70 Vdc, 10A.
4mm Banana Plug to
2mm Sheathed Banana
Jack Adapter
Model#
Color
72917-0
72917-2
Black
Red
Rating: Hands free testing in controlled
environment: 70 vrms max. For CE compliance: Not intended for hand-held use
at voltages above 33 Vrms / 70 Vdc.
Rotating Micrograbber®
Test Clip with Two 0.025in
(0.635mm) Square Pins
Model# Features
5790-* Sold individually
5929-* Rotating Micrograbber® Test
Clip Kit. -0 kit contains 10
Model 5790 black clips,
-2 kit contains 10 red clips.
5930
Rotating Micrograbber® Test
Clip Kit., Kit contains 5 Black
& 5 Red Model 5790 clips.
Use when testing IC leads at 0.05in
(1.25mm) pitch or in other tight situations. Pincers rotate for ease of access.
Accepts 2mm safety-sheathed banana
plugs. 10/pkg.
Overall Length: 2.12in (53.85mm)
Rating: 30 Vac / 60 Vdc max, 2A max..
Rating: 33 Vac / 70 Vdc, 10A.
*Std Colors: -0 Black, -2 Red.
2mm Safety Sheathed
Jacks
Model#
Color
72921-0
72921-2
Black
Red
2mm safety sheathed jack with 1.9mm
wire wrap connecting pin.
Materials: Contacts: Nickel plated brass.
Insulation: Polyamide.
Rating: 600V Cat II, 10A.
Micro SMD Grabber® Test
Clip for 0.05 to 0.02in
(1.25 to 0.5 mm)
Lead Pitch
Model# 6490-*
• Use with PQFP & SOIC packages with
0.02in (0.5mm) lead pitch or greater.
• Pincers and 0.03in (0.76mm) pin
plug are directly connected; no
sliding parts.
• Pincers are stationary. Housing moves
to close tips together.
• Device under test must be inactive
when connecting pincers.
2mm Safety Sheathed
Jack with Solder Tab
Model#
Color
72922-0
72922-2
Black
Red
Rating: Hands free testing in controlled
environment: 70 vrms max. For CE
compliance: Not intended for hand-held
use at voltages above 33 Vrms / 70 Vdc.
*Std Colors: -0 Black, -2 Red.
Materials: Contacts: Nickel plated brass,
Insulation: Polyamide.
Rating: 600V Cat II, 10A.
www.pomonaelectronics.com
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Oscilloscope Probes and
Accessories
Pomona’s oscilloscope probes give you the full range you need. Designed,
rated, and specified to match the bandwidth of your instrument, they provide
you with full voltage read-out over the entire rated bandwidth of each probe.
79
Replacement Passive
Oscilloscope Probes
These general purpose monolithic passive
voltage probes feature high performance
for greater test flexibility. Complete accessory kit included.
See selection guide below.
Monolithic Passive Oscilloscope Probes
Model#
5800A
6265
6266
5795A
4550B
6049A
6101A
SP150B
5803A
5806A
5827
6069A
6102A
5809A
5812A
Probe
Ratio
Maximum Input
Voltage CAT I 1
System Bandwidth
MHz (-3 dB)
System
Risetime (ns)
Probe Input
Resistance (MΩ)
Probe Input
Capacitance (pF)
Compensation 5
Range (pF)
Readout
Actuator 4
Cable
Length
1:1
10:1
1:1
10:1
10:1
1:1
10:1
10:1
10:1
1:1
10:1
10:1
1:1
10:1
100: 1
10:1
10:1
10:1
10:1
3002
300
3002
300
300
3002
300
300
300
3002
300
300
3002
300
300
300
300
300
300
Up to 303
60
Up to 203
60
100
Up to 153
100
150
150
Up to 153
150
200
Up to 203
200
200
250
250
300
300
< 11.663
< 5.83
< 17.53
< 5.83
< 3.50
< 23.333
< 3.50
< 2.33
< 2.33
< 23.333
< 3.33
< 1.75
< 17.53
< 1.75
< 1.75
< 1.40
< 1.40
< 1.17
< 1.17
1
10
1
10
10
1
10
10
10
1
10
10
1
10
10
10
10
10
10
< 57 + O-Scope
< 10.5
< 65 + O-Scope
< 11
< 9.5
< 64 + O-Scope
< 10.5
< 10.5
< 10.5
< 50+ O-Scope
< 15
< 10
< 77 + O-Scope
< 11.5
< 5.5
< 10
< 10
< 17
< 17
NA
10 - 60
NA
10 - 60
10 - 60
NA
10 - 60
10 - 30
10 - 30
NA
10 - 60
10 - 60
NA
10 - 60
15 - 50
10 -30
10 - 30
10 – 60
10 -60
No
No
No
4ft (1.2m)
4ft (1.2m)
4ft (1.2m)
No
No
4ft (1.2m)
4ft (1.2m)
No
Yes
No
4ft (1.2m)
4ft (1.2m)
4ft (1.2m)
No
No
4ft (1.2m)
4ft (1.2m)
No
No
Yes
No
Yes
6.6ft (2.0m)
4ft (1.2m)
4ft (1.2m)
4ft (1.2m)
4ft (1.2m)
Replacement Accessory Kit: 6267
Pomona adapters with 0.025in
(0.635mm) pins
Oscilloscope Probe Tip Adapter Model# 6443
Kit includes:
Retractable Hook Tip
BNC Adapter
IC Adapter
Insulating Tip
Trimmer Tool
6in (0.15m) Ground Lead with Alligator
Clip
5360 6313
6490
5790 6351
6442
6311 6352
6444
6312 6353
All “IC” test clips
This adapter provides an easy, fast, and reliable way to connect your oscilloscope probe to IC test
adapters, test clips and grabbers using 0.025in (0.635mm) connection pins.
1 Rating: All probes are rated 300V (DC + Peak AC), CAT I, per IEC1010-2-031. Maximum voltage allowed on the LO
connection including shell and housing must not exceed 30V.
2 Maximum input voltages are dependent on the oscilloscope input characteristics; take the lesser of the two specifications.
3 Dependent upon oscilloscope input characteristics.
4 Any oscilloscope that uses the Tektronix® style range actuator.
5 For oscilloscopes with 1 MΩ input resistance.
www.pomonaelectronics.com
Oscilloscope Probes and Accessories
80
Modular Passive Oscilloscope Probes
Featuring a new, compact, ergonomically
designed probe handle, these modular general purpose passive voltage probes are ideal
for use with a wide variety of oscilloscopes.
They also feature a spring-loaded, pogo-pin
replaceable tip. The fine tip probes are perfectly suited for probing high-density chip
leads with less than 0.060in (1.52mm)
spacing. Modular in design, the probe handle
is capable of receiving a variety of springloaded and fixed tips, providing greater
testing versatility. An affordable, versatile
probe for many uses.
Probe sets feature probe handle, insulated
adjusting tool, sprung hook, BNC adapter,
9.06in (230mm) ground lead, 0.98in (25mm)
ground adapter, IC tip adapter, tip cover, rigid
tip and spring-loaded tip (1 each), and complete set of instructions and specifications.
Model#
6491
6493
6494
6499
6495
6500
6496
6497
6498
6501
6492
Probe
Ratio
Maximum Input
Voltage CAT II 1
System Bandwidth
MHz (-3 dB)
System
Risetime (ns)
Probe Input
Resistance (MΩ)
Probe Input
Capacitance (pF)
Compensation 5
Range (pF)
Readout
Actuator 4
Cable
Length
1:1
10:1
10:1
1:1
10:1
10:1
1:1
10:1
10:1
10:1
100:1
10:1
10:1
100 V2
300 V
300 V
100 V2
300 V
300 V
100 V2
300 V
300 V
300 V
1.5 kV
300 V
300 V
Up to 253
60
60
203
60
100
203
100
350
350
350
350
350
< 14.03
< 5.90
< 5.90
< 17.53
< 5.90
< 3.50
< 14.03
< 3.50
< 1.00
< 1.00
< 1.20
< 1.00
< 1.00
1
10
10
1
10
10
1
10
10
10
50
10
10
< 38 + O-Scope
< 10
< 10
< 40 + O-Scope
< 10
< 10
< 42 + O-Scope
< 10
< 12
< 12
<6
< 12
< 12
NA
10 - 60
10 – 60
NA
10 – 60
10 - 60
NA
10 – 60
5 – 40
5 – 40
10 – 50
8 – 45
8 – 45
NA
No
Yes
No
4ft (1.2m)
4ft (1.2m)
4ft (1.2m)
4ft (1.2m)
No
No
4ft (1.2m)
4ft (1.2m)
No
Yes
No
No
Yes
4ft (1.2m)
4ft (1.2m)
6.6ft (2.0m)
4ft (1.2m)
4ft (1.2m)
Replacement Accessory
Kit: 6552
Kit includes:
Retractable Hook Tip
BNC Adapter
IC Adapter
Insulating Tip
Trimmer Tool
6in (0.15m) Ground Lead
with Alligator Clip
Right-Angle Ground Lead
Spring
1 ea. Rigid Probe Tip
1 ea. Spring Probe Tip
(not sold separately)
1
2
3
4
Oscilloscope Probe Tip Adapter Model# 6553
Pomona adapters with
0.025in (0.635mm) pins
5360 6351
6442
5790 6352
6444
6311 6353
All “IC”
test clips
6151
6312 6490
6313
This adapter provides an easy, fast, and reliable way to connect your oscilloscope probe to IC test adapters, test clips
and grabbers using 0.025in (0.635mm) connection pins.
Rating: Per IEC1010-2-031. Maximum voltage allowed on the LO connection including shell and housing must not exceed 30V.
Maximum input voltages are depended on the oscilloscope input characteristics; take the lesser of the two specifications.
Dependent upon oscilloscope input characteristics.
Any oscilloscope that uses the Tektronix® style range actuator.
5 For oscilloscopes with 1 MΩ input resistance.
www.pomonaelectronics.com
Oscilloscope Probes and Accessories
81
Microline Passive Oscilloscope Probes
500 MHz x 10 Passive Voltage Probe
4ft (1.2m) cable, 500V peak.
The perfect solution for accessing
hard-to-reach test points, particularly
fine pitch IC leads. The Microline Probe
features a 500 MHz X10 passive
voltage probe compactly designed for
on-the-go field service or in the lab.
Tips can be replaced with Pomona
0.60in (1.52mm) probe tips model
number 6475, see page 68.
Model#
Probe
Ratio
Maximum Input
Voltage CAT I 1
System Bandwidth
MHz (-3 dB)
System
Risetime (ns)
Probe Input
Resistance (M W)
Probe Input
Capacitance (pF)
Compensation 5
Range (pF)
Readout
Actuator 4
Cable
Length
6551
6554
10: 1
10: 1
500 V
500 V
500
500
< 0.70
< 0.70
10
10
< 10.5
< 10.5
8 - 20
8 - 20
Yes
No
4ft (1.2m)
4ft (1.2m)
Replacement Accessory
Kit: 6552
Kit includes:
Retractable Hook Tip
BNC Adapter
IC Adapter
Insulating Tip
Trimmer Tool
6in (0.15m) Ground Lead
with Alligator Clip
Right-Angle Ground Lead
Spring
1 ea. Rigid Probe Tip6
1 ea. Spring Probe Tip6
(not sold separately)
Pomona adapters with
0.025in (0.635mm) pins
Oscilloscope Probe Tip Adapter Model# 6553
5360 6351
6442
5790 6352
6444
6311 6353
All “IC”
test clips
6151
6312 6490
6313
This adapter provides an easy, fast, and reliable way to connect your oscilloscope probe to IC test adapters, test clips
and grabbers using 0.025in (0.635mm) connection pins.
1 Rating: Per IEC1010-2-031. Maximum voltage allowed on the LO connection including shell and housing must not exceed 30V.
4 Any oscilloscope that uses the Tektronix® style range actuator.
5 For oscilloscopes with 1 MΩ input resistance.
6 For replacement tips: Model 6475 may be ordered for Models 6551 and 6554.
RF Detector (demodulator) Probe
Model# 5815A
Model 5815 is a miniature RF Detector
Probe intended for use with a wide range of
oscilloscopes. This probe is very useful for
measuring RF signals up to 800 MHz. It provides an output of 1 Vdc for an input of 1
Vrms sinewave.
Diode Turn-On Voltage: 200 mV.
Input Capacitance: 5 pF.
Peak AC Input: 50V.
DC Isolation Incl. Peak AC: 200V.
Cable Length: 4ft (1.2m).
1 Vdc output for input of 1 Vrms.
Bandwidth: 1 MHz - 400 MHz ± 3dB,
500 KHz - 1 MHz ± 4dB,
400 MHz - 800 MHz ± 4dB.
Rating: Maximum voltage allowed on the LO
connection including shell and housing must
not exceed 30V from earth ground.
www.pomonaelectronics.com
Oscilloscope Probes and Accessories
82
Insulated Oscilloscope Probes for Portable Applications
These passive voltage oscilloscope probes
provide additional safety for portable instrument users. Pomona’s Insulated Probes provide insulation coverage for the entire probe
including the BNC connector. A spring-loaded
sheath covers the tip ground point.
Compensation point in BNC end.
• Offered in two styles:
6006 Fixed Attenuation X10.
6035 Switchable Attenuation X1/X10.
• Cable length 4ft (1.2m).
• Model 6033 is a set of two 6006 Probes
(one red, one gray).
Accessories Included:
Sprung Hook
Trimmer Tool
IC Tip
Insulating Tip
BNC Adapter
Replacement Tip
Ground Lead
Sheathed Banana Plug Adapter
Rating: Maximum voltage allowed on the LO
connection including shell and housing must
not exceed 30V from earth ground.
Replacement
Accessory Kit
Model# 6034-*
* Std. Colors: -2 Red, -8 Gray
Model#
6006-*
6033 (set)
6035-*
Attenuation
Bandwidth (MHz)
Resistance (MΩ) 2
Input Impedance
Capacitance (pF)
Approx.
Risetime (nS)
Voltage (V Max) 3
Compensation 3
Range (pF)
X10
X10
X1/X10
200
200
20/200
10
10
1/10
15
15
47/15
1.8
1.8
17.5/1.8
250
250
250
10-60
10-60
10-60
* -2 Red, -8 Gray
1 When connected to an oscilloscope with 1 MΩ input resistance.
2 Derated with frequency.
3 For oscilloscopes with 1 MΩ input resistance.
Active Differential Probe
Input Characteristics
Input Probe
Input Cable Length
Probe Ratio
Voltage to Ground
Maximum Input
Maximum Differential
Input Voltage
Maximum Floating
Voltage / Frequency
Probe Input Resistance
Probe Input Capacitance
Operating Temperature
Shrouded banana test probe
60in (1.5m)
20:1 / 200:1
600V CAT III
1000V CAT II
1000 Vdc
1000 Vrms
1200V (DC + Peak AC)
600V Category III /400 Hz
(from shielding to ground)
5 MΩ (input to shielding)
10 MΩ (input to input)
6 pF (input to shielding)
5 pF (input to input)
+32 to +122°F
(0 to +50°C)
Output Characteristics
Pomona Model 6731 differential voltage probe allows users to safely make
floating high voltage measurements
while using general purpose oscilloscopes. Using a built-in differential
amplifier, the floating signal is converted and scaled to a low-voltage signal
referenced to earth ground. The probe
can be used on circuits associated with
electronic high-power converters,
motor speed controls, switching mode
power supplies, and other high voltage
circuits requiring isolation.
Features include switchable attenuation, high impedance to ground for
both positive and negative side of the
balanced input, and maximum differential voltage up to 1000V. The probe
input uses shrouded banana test probe
tip. The output to the oscilloscope is
made with a BNC cable with a safety
insulated BNC male connector.
www.pomonaelectronics.com
Included with the 6731:
Large Jaw Alligator clips
(one red and one black).
Pin-Grabber Test Clips
(one red and one black).
9V Alkaline Battery.
Optional:
Output Cable
Output Cable Length
Output Voltage Range
Accuracy
Bandwidth
Risetime
CMRR
BNC cable
20in (0.5mm)
±6.5V (into 1MW)
±2.5%
DC to 20 MHz (-3 dB)
17.5 ns
20:1 @ 60Hz =>70dB
20:1 @ 1MHz =>40 dB
200:1 @ 60Hz => 80dB
200:1 @ 1 MHz =>50dB
Power
9V Alkaline Battery
Model 6732: Universal
Power Adapter.
Model 6732 Optional
Universal Power Adapter
8 hours operation. 400 hours
in standby. Unit goes into
standby mode after 30 minutes
(battery mode only).
For continuous operation
Audio/Video
Whether setting up your own home theater or looking for connectors
for that next broadcast event, Pomona audio/video accessories get
you connected reliably. From F connectors to phono jacks, look to
Pomona for parts you can depend on.
83
High Definition 75Ω BNC Connectors
1.18in
(30.0mm)
Model# For Cable
6702
6703
6704
1.18in
(30.0mm)
1.18in
(30.0mm)
RG59B/U, 20 AWG, Belden 1505A
RG6B/U, 18 AWG, Belden 1694A
RG59B/U, 23 AWG
Precision matched to Belden cable for digital
and analog SDI/HDTV signals.
Performance: 3 GHz with VSWR of 1.15
6702
Audio/Video
Impedance: 75Ω.
6704
6703
BNC: Shell: precision machined tarnish resistant
black nickel-plated brass; Center Contact: male:
gold-plated brass (20 micro inches).
Whether setting up your own home theater or looking
for connectors for that next broadcast event, Pomona
audio/video accessories get you connected reliably.
From high definition video connectors to phono jacks,
to Pomona
forPost
parts you can depend on.
XLRlook
Triple
Binding
Dielectric: PTFE.
5-way binding posts accept:
• Banana plugs –
vertically or horizontally
• Dual or triple banana plugs –
vertically or horizontally
• Bare wire via through-holes
• Alligator clips or spade lugs
Gold-plated pins and
binding posts for
excellent conductivity
Model#
Type
RJ11
7288
7289
7286
7287
(m)
(f)
(m)
(f)
•
•
–
–
Adapter makes it easy to split out the signals
form the three XLR audio conductors for access
via 5-way binding posts. RJ11 jack also simplifies connection to phone for ring down tests of
audio lines or for phone communications across
audio cables. Includes three color-coded 5-way
binding posts for high, low, and ground terminals. Cables can be connected to rugged binding
posts via banana plug, spade lug, alligator clip,
or simply fed into the through-hole or wrapped
around the post.
RJ11 allows easy
phone connection for
communication or testing
XLR plug or jack for
connection to audio
cable links or broadcast
system panels
Molded thermoplastic
construction provides
maximum durability
XLR Straight Cable Connectors – Rugged
0.750in (19.05mm)
Male
0.750in (19.05mm)
Female
Model#
Type
Pins
Shell
5109A
5110
5125A
5126A
6852
6853
7273
7274
7275
7276
(f)
(m)
(f)
(m)
(f)
(m)
(m)
(f)
(m)
(f)
3
3
5
5
3
3
3
3
3
3
Nickel
Nickel
Nickel
Nickel
Black Nickel
Black Nickel
Nickel
Nickel
Black Nickel
Black Nickel
IDC
•
•
•
•
Contacts Lbs of Pull
Silver
Silver
Silver
Silver
Gold
Gold
Silver
Silver
Silver
Silver
100
100
45
45
100
100
100
100
100
100
Passes the 100 pound stress test.
When connection failure is simply not an option, depend on Pomona XLR
connectors. The patented XLR cable retention system can withstand up to
100 pounds (45.35 kg) of pull and up to 50,000 bends under stress. By securely
capturing the cable, our system relieves strain from the solder joints between
the cable and the connector, protecting your connections from workplace abuse.
Ratings: The components in this section have a hands free rating for use in controlled voltage environments.
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
www.pomonaelectronics.com
Audio/Video
84
BNC Male Terminator Plugs
1.44in
(36.5mm)
Model#
Ω
3840-50
3840-75
50
75
Rating: Frequency Range DC to
500 MHz, Power 0.5W @ 158°F
(70˚C) Max.
F Connectors
1.01in
(25.6mm)
1.01in
(25.6mm)
Model# Type
For Cable
6707
6708
RG6
RG59
F (m)
F (m)
Easy installation. Simply strip the
cable and push-on the connector.
No crimp tool required.
Accuracy: 1%.
Material: Gold-plated brass.
6707
40lb (18.1kg) minimum cable
retention.
6708
Impedance: 75Ω.
BNC Within Series
Adapters
1.27in
(32.3mm)
Model# Type
6754
Special Features
BNC (f/m/f) In-line
F Female PCB Mount
Model# Type
6711
In-line design improves cable routing.
Performance: 3 GHz .
1.53in
(38.8mm)
1.06in
(26.9mm)
For RG59 and RG6 cable.
Rating: Hands free testing in controlled voltage
environment: 500 Vrms*, -85˚F to +329˚F
(-65˚C to +165˚C).
True 75Ω.
Mounts and locks onto circuit board
edge.
Impedance: 75Ω.
BNC: Shell: tarnish resistant nickel-plated brass;
Center Contact: male: gold-plated brass; female:
gold-plated beryllium copper; Dieletric: PTFE.
F Between Series
Adapters
1.00in
(25.40mm)
Model#
Type
6714
6715
6716
BNC (m)/F (f)
BNC (f)/F (f)
F (m)/BNC (f)
RCA Plug/RCA
Plug Cable
Assemblies
Model#
Plugs
Plug Color at each end
6896-180
6898-180
6900-180
6901-180
2 RCA / 2 RCA
1 RCA / 1 RCA
3 RCA / 3 RCA
1 RCA / 1 RCA
White / Red
Black
Red / Green / Blue
Yellow
Material: Center Contact: goldplated brass.
Length: 4.6 m (15 ft).
BNC: Shell: tarnish resistant nickel-plated brass;
Center Contact: male: gold-plated brass; female:
gold-plated beryllium copper (except as noted).
6714
F (f) Reflow type with
TFE insulator
Dielectric: PTFE.
1.25in
(31.75mm)
1.05in
(26.67mm)
BNC Female to Phono
(RCA) Male
Model# 5319
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, 216˚F (+102˚C) max.
1.28in
(32.5mm)
BNC: Center Contact: gold-plated.
6715
6716
BNC Male to Phono Jack
F Within Series
Adapters
1.0in
(25.4mm)
1.40in
(35.56mm)
Model# Type
6712
6713
F (m/f) Right angle
F (m/f) In line, Push-on
Model# 4054
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +257˚F (+125˚C) max.
Material: Machined, nickel-plated brass
0.92in
(23.3mm)
BNC Female to 1/4in
(6.35mm) Phone Plug
Model# 1297
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +257˚F (+125˚C) max.
2.46in (62.48mm)
6712
Convert 2 conductor audio jacks to
0.25in
(6.35mm) BNC.
6713
0.25in (6.35mm)
F Bulkhead Receptacle
0.80in
(20.4mm)
Model#
Type
6706
F (f/f) In line, with nut and washer
Material: Machined, nickel-plated brass.
BNC Female to Two
Conductor, 0.14in (3.5mm)
Dia. Mini Phone Plug
1.92in (58.77mm)
Model# 3837
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +257˚F (+125˚C) max.
Convert 2 conductor audio jacks to
0.141in
BNC.
(3.58mm)
www.pomonaelectronics.com
*see rating message at start of section.
Audio/Video
BNC Male to 1/4in (6.35mm)
Two Conductor Phone Jack
BNC Female to Two
Conductor Micro Phone Plug
Model# 4043
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +257˚F (+125˚C) max.
2.86in (72.64mm)
1.82in (46.23mm)
Permits BNC male to be used with
equipment having micro jacks.
Phono plug cables are available see
page 14.
0.097in
(2.46mm)
Model# 1442
Rating: Hands free testing in
controlled voltage environment:
500 Vdc*, +122˚F (+50˚C) max.
1.82in
(46.23mm)
1.13in
(28.70mm)
1.13in
(28.70mm)
Permits phono plug to be used with
equipment having standard banana
jacks or binding posts.
Wall/Floor Mount Female
XLR Receptacle
0.67in
0.51in (12.95mm)
1/4in (6.35mm) Phone Plug
Adapter with Binding Posts
Sockets
5113A
3
2 x 0.128in
(3.25mm)
0.98in (24.89mm)
Model# 1285
Rating: Hands free testing in
controlled voltage environment:
500 Vdc*, +122˚F (+50˚C) max.
1.91in
(48.51mm) open
Model#
(17.02mm)
1.02in
(25.90mm)
1.19in
(30.23mm)
85
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +257˚F (+125˚C) max.
Convert 2 conductor phone plugs to
BNC.
Phono Jack to Double
Stacking Banana Plug
Model# 4267
2 Conductor phone plug.
Wall/Floor Mount Male XLR
Receptacle
Model#
Pins
5117A
3
Cross holes fit double banana plug.
0.75in
(19.05mm)
0.98in (24.89mm)
0.25in (6.35mm)
1.06in
(26.92mm)
1/4in (6.35mm) Phone Jack
to Double Stacking Banana
Plug
2.80in (71.12mm)
Model# 4044
Rating: Hands free testing in
controlled voltage environment:
500 Vrms*, +122˚F (+50˚C) max.
2 conductor 0.25in (6.35mm) dia.
phone jack.
Rugged XLR Plug
to XLR Jack Audio
Cable
0.75in
(19.05mm)
Model#
6510-V-12-0
6510-V-24-0
6510-V-36-0
6510-V-48-0
6510-V-60-0
6510-V-72-0
6902-120
6902-180
6902-240
6902-300
Length
3.0 m (10 ft)
4.6 m (15 ft)
6.1 m (20 ft)
7.6 m (25 ft)
Material: Shell: precision machined tarnish
resistant black nickel-plated brass; Center Contact:
male: gold-plated brass (20 micro inches);
female: gold-plated heat treated beryllium copper.
Length
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
72in (1.8m)
BNC connectors are perfectly
matched to 75Ω impedance for
superior VSWR & return loss
performance.
Ideal for digital video and
telecommunication applications
Cable Type: High Flex, Multistrandcenter conductor, RG59
Type, Black.
*see rating message at start of section.
Model#
Rugged audio cables constructed with Belden
1172A Starquad cable includes a 3-pin rugged
XLR male connector and a 3 contact rugged XLR
female connector. Constructed to withstand
45.35 kg (100 lbs) of pull and up to 50,000
bends under stress.
1.22in
(30.99mm)
True 75Ω BNC Male Cable
2 x 0.128in
(3.25mm)
6869 XLR Plug to
XLR Jack Low Noise
Cable Assembly
Model#
6869-180
6869-300
Length
4.6 m (15 ft)
7.6 m (25 ft)
Low noise audio cable includes a 3-pin XLR male
connector and a 3 contact XLR female connector.
Pull: 45.35 kg (100 lbs).
Material: Shell: tarnish resistant black nickel-plated
brass; Center Contact: gold-plated brass.
www.pomonaelectronics.com
Automotive
Offering a variety of test accessories designed specifically for the
automotive environment, Pomona simplifies automotive diagnostics.
Pomona automotive accessories give you access to wiring or cables
in congested engine compartments, under-dash wiring harnesses,
and other generally hard-to-reach places.
86
Insulation Piercing
Clip Sets
Model# Features
Colors
6405
6413
Set of red/black
Set of red/black
Attach to test leads
Attach to 0.080in
(2.03mm) Probe tip
6580-12 12in (304.8mm) long
6580-24 24in (609.6mm)
Rigid Backprobe Pin
-0 blk, -2 red
-0 blk, -2 red
3.95in (100.3mm)
• Double V block centers wire.
• 6405, 6413: set of 2, (red and black jacks).
• Bright yellow for easy location.
• Attach to test leads.
Insulation Piercing
Maxigrabber® Test Clip Set
Shielded Test Lead Set
Model# 5913
Test Connector Adapter Set
Model# 4408M
Model# 6411
• Make connection to terminals
inside connectors up to 1in
(25.40mm) deep.
• For low voltage use < 30V.
• Pkg of 10.
www.pomonaelectronics.com
Model# 6480
Model# 6481
• Full set of pin and socket adapters
• 18 piece set includes one black
and red pin and socket of
each size.
• Contact sizes: 0.03in (0.75mm),
0.04in (1mm), 0.06in (1.5mm),
0.10in (2.5mm).
• Includes Silicone insulated 4ft
(1.22m) leads to fit most DMMs
from Fluke, Amprobe, Greenlee
and others.
• Magnetic, attach to tool box or
other steel cabinet.
• Neat storage for leads.
• Easy access.
Basic Backprobe Pins
• Sharp point to pierce insulation or
weather boot up to 2in (50.8mm)
deep.
• For low voltage use < 30V.
• Set of 2 (red + black).
• Fits comfort-grip style and
modular probes 6232A and 6479.
• Stacking double banana plug
mates with instrument interface.
• 12in silicone leads connect
to test probes or clips
(See page 64).
• Silicone leads resist high
temperatures.
• Shielded 4ft (1.22m) cable is stiff
enough to keep away from
moving parts.
• Insulated probe for hard to reach
test points.
• Set of 2, red and black.
Test Lead Rack
Model# 6544-02
Coaxial Lead Set Lead Set
Model# 6534
• Complete set of coaxial leads.
• Molded strain relief.
• Seven piece set from 1 to 10ft
(0.3 to 3.05m).
• Standard BNC connectors fit
oscilloscopes and other
instruments.
IC Test Clips and Adapters
Innovative solutions. Pomona Electronics’ IC Test Clips – designed for your
chip. Uniquely designed for testing surface mount devices – easily, securely
and successfully. Low-profile fine-pitch chips, densely populated boards, or vertical boards, POMONA test clips connect you with confidence.
87
Pomona® JEDEC IC Test Clip Features
High-temperature LCP
molded housing.
Modular contact
housings.
Lock-on jaw design
assures positive locking
under IC housing.
Precision-molded housing
isolates each contact to
prevent shorting.
Attaches to popular JEDEC ICs
in 68-, 84-, 100-, 132-, 164and 196-pin sizes.
How to Measure or Calculate the Critical
Dimension for Your QFP Test Clip
Flex circuitry (Flexible
Interface Network – FIN™)
allows interface connection/locking action.
Critical Dimension
Gold-plated contacts;
low insertion force.
T
L
Individually cantilevered
contacts conform to
variances in device lead
position.
D
Measure Critical Dimension with
calipers parallel to the plane of the PCB
Critical Dim. C = D - 2 (L - T)
Test Clip Selection Made Easy
To select the Pomona IC Test Clip specifically designed for your chip,
find the table for your chip type and follow the selection procedure outlined in this section.
JEDEC QFP
To find your JEDEC QFP test clip, turn to the
JEDEC QFP table on page 88 and reference the
following characteristics of your target chip:
SSOP/QSOP
To find your SSOP/QSOP test clip, turn to the
SSOP/QSOP table on page 80 and reference the
following characteristics of your target chip:
Metric QFP
To find your Metric (EIAJ) QFP test clip, turn to
the Metric QFP table on page 89 and reference the
following characteristics of your target device.
1. Number Of Leads
2. Body Size
1. Lead Pitch and Body Size
2. Number Of Leads
3. Locking Feature (see Fig. 1, 2 & 3, page 88)
1. Number of leads
2. Body size
3. Lead pitch
4. Critical dim. (See below)
PLCC
To find your PLCC Quad Clip® test adapter, turn
to the PLCC table on page 89 and reference the
following characteristics of your target chip:
DIP
To find your DIP test clip, turn to the DIP table on
page 82 and reference the following characteristics
of your target chip:
SOIC/SOJ
To find your SOIC Clip® test clip, turn to the
SOIC/SOJ table on page 82 and reference the
following characteristics of your target chip:
1. Number Of Leads
2. Body Size
1. Number Of Leads
2. Test Clip Contact Style
(see Fig. 1 & 2, page 90)
1. Number Of Leads
2. Confirm Body Width Compatibility
3. For Lower and Top Test Clip Width
(see Fig. 1, 2 & 3, page 90)
www.pomonaelectronics.com
IC Test Clips and Adapters
88
JEDEC PQFP Test Clips
Model# No. Leads
5713
5777
100
Body Size
Pomona’s JEDEC QFP test clips are designed
to fit on surface-mounted plastic and ceramic
JEDEC chips. Choose from two clip types
designed to give you optimum functionality
and ease of use for testing, troubleshooting
and custom-design evaluation with logic
analyzers and oscilloscopes.
Lead Pitch: 0.025in (0.635mm).
Fig. 1
Fig. 2
SSOP/QSOP Test Clips
Model#
No.
Lead
Leads Pattern
5969
5969A
5972
20
10+10
24
12+12
5893
48
24+24
5894
56
28+28
Fig. 3
Pomona offers a wide variety of Micro-SMD
Grabber® Test Clips for use in testing fine pitch
PQFP devices. See SMD / Micro Format Test
section for complete selection.
www.pomonaelectronics.com
1
2
Fig. 1: The basic JEDEC QFP test clip is
designed for use on densely-populated
boards where space is at a minimum. Leads
at the top of the clip are 0.022in x 0.012in
(0.56mm x 0.30mm) and are spaced 0.075in
(1.9mm) apart.
Fig. 2: Pomona’s most popular JEDEC QFP
test clip features a large board with 0.025in
(0.635mm) pins at 0.100in x 0.100in
(2.54mm x 2.54mm) spacing for easy connection to logic analyzers and oscilloscopes.
The board is elevated to avoid other board
components near the target chip.
Lead
Pitch
Pkg.
Type
Typical
Applications
0.21in
(5.3mm)
0.21in
(5.3mm)
0.3in
(7.62mm)
0.3in
(7.62mm)
0.026in
(0.65mm)
0.026in
(0.65mm)
0.025in
(0.65mm)
0.025in
(0.635mm)
SSOP
1
2
1
SSOP
TI SN74ABT245, IDT 74FCT244,
Maxim MAX153
IDT 74FCT244TPY, Phillips 80C751,
MAXIM MAX120, MAX153
TI ABT16244, ACT16245
SSOP
IDT FCT16223, FCT162511
3
SSOP
Fig. 1: Clip is located and held with a
cantilevered plastic guide that holds the
ends of the chip under test. Ideal for denselypopulated boards, this clip can attach onto
a chip that is spaced only 0.050 (1.27mm)
away from an adjacent board component.
Fig. 2
Fig.
Body
Size
With Pomona’s SSOP and QSOP test clips,
technicians can now access all of the leads
on popular low-profile, fine-pitch SSOP
and QSOP chips. Each clip has 0.025in
(0.635mm) sq. pins at 0.100in x 0.100in
(2.54mm x 2.54mm) spacing to allow
connections with jumpers or Pomona’s
flying leads.
Fig. 1
Typical Applications
0.75in X 0.75in
Intel 80C186EC, 80386SX,
(19.05mm x 19.05mm) AMD 29205, 386EM, 386SXLP
Fig.
3
Fig. 2: Clip features spring-loaded fingers to
attach easily and hold firmly onto the ends of
the chip. Clip fingers are opened by finger
pressure on the upper handles. A clearance
of 0.125in (3.17mm) is required at the ends
of the chip under test.
Fig. 3: Clip features spring-loaded contact
housings that clamp onto the side of the chip
body. Gold-plated contacts are individually
cantilevered to maintain positive connections.
User interface provides 0.025 (0.635mm) sq.
pins at 0.10 (2.54mm) centers.
Lead Pitch: 0.025in (0.635mm).
IC Test Clips and Adapters
89
Metric QFP Test Clips
Fig. 2: PGA interface*
Fig. 1: Press-on clip
Fig. 3: Clip with locking fingers*
Model#
No. Leads
Body Size
Lead Pitch
Max. Height
Critical Dim.†
5961
5961-2
5888
5888-2
5751L
44
0.39in x 0.39in (10mm x 10mm)
0.03in (0.80mm)
0.13in (3.4mm)
64
0.55in x 0.55in (14mm x 14mm)
0.03in (0.80mm)
0.13in (3.4mm)
80
0.55in x 0.79in (14mm x 20mm)
0.03in (0.80mm)
0.13in (3.4mm)
100
0.55in x 0.79in (14mm x 20mm)
0.26in (0.65mm)
0.13in (3.4mm)
112
0.55in x 0.55in (14mm x 14mm)
0.79in x 0.79in (20mm x 20mm)
0.02in (0.50mm)
0.26in (0.65mm)
0.06in (1.4mm)
0.13in (3.4mm)
160
1.10in x 1.10in (28mm x 28mm)
0.79in x 0.79in (20mm x 20mm)
1.10in x 1.10in (28mm x 28mm)
0.26in (0.65mm)
0.02in (0.50mm)
0.26in (0.65mm)
0.13in (3.4mm)
0.06in (1.4mm)
0.13in (3.4mm)
0.48in (12.3mm)
0.46in (11.6mm)
0.64in (16.3mm)
0.61in (15.6mm)
0.64in x 0.88in
(16.3mm x 22.3mm)
0.61in x 0.85
(15.6mm x 21.6mm)
0.64in x 0.88in
(16.3mm x 22.3mm)
0.61in x 0.85in
(15.6mm x 21.6mm)
0.59in (15.0mm)
0.83in (21.0mm)
0.85in (21.7mm)
1.17in (29.6mm)
0.83in (21.0mm)
1.19in (30.3mm)
176
208
0.94in x 0.94in (24mm x 24mm)
1.10in x 1.10in (28mm x 28mm)
0.02in (0.50mm)
0.02in (0.50mm)
0.06in (1.4mm)
0.13in (3.4mm)
0.98in (25.0mm)
1.17in (29.6mm)
240
1.26in x 1.26in (32mm x 32mm)
0.02in (0.50mm)
0.16in (4.0mm)
1.16in (29.3mm)
1.33in (33.8mm)
5751L-2
5643
5643L
5643L-2
6150
5868L
5868L-2
5773-2
6151
5645L
5645L-2
6152
5770
5770L
5770-2
5998A
144
5998AL
* Includes male to male adapter pins
Fig. 4: Clip with internal
locking feature
Typical Applications
Fig.
Motorola 68HC11
1
NEC µPD71054, Altera EPM70320C44
1
Intel 82078, Phylon PHY1002
1
Motorola 68HC05, Hitachi H8/3714
1
Intel 80C186XL, Cirrus Logic CL-SH260,
1
Adaptec AIC-6360Q
4
AMD 80C186, AMD S80L188,
4
Phillips 9XC1X0, AMD S80L186
Motorola 68EC020F,
1
AT&T 3042, Fujitsu MB86600
4
Altera EPM5130, Cirrus Logic CL-SH3620, 4
Xilinx XC4003, Xilinx XC3042
TI TMS320C52
3
Hitachi H8 / 510, H8 / 570, SH 7032
3
Motorola DSP56156
3
Siemens SAB-C167, SGST STLC5444
1
Motorola 68302
3
Actel A1280, Emulex FAS256
4
Motorola MPC403
4
Intel 486SX
3
Intel 80486DX2E, Motorola MC68HC05,
1
Actel A1480, Altera EPF8636, EPF8820
4
Most Ceramic + Metal Packages
3&4
Motorola XC68360 Ceramic
2
Analog Devices ADSP-21060,
2
LSI L1A7747, Altera EPF81188
3
Xilinx XC4025-MQ240
2&3
† For instructions on calculating the critical dimension, see page 79.
PLCC Test Clips
No.
Lead
Model# Leads Pattern
Pomona’s low-cost Quad Clip test
clips quickly lock onto J-leaded
PLCCs, providing easy access for
testing surface-mounted devices.
PLCC test clips attach to PLCC
chips with a sliding cam that
clamps onto the chip body. Access
to chip leads is provided by
0.025in (0.635mm) pins at 0.100in
(2.54mm) spacing. Pomona offers
a Quad Clip® test clip to fit all
currently available PLCC chip sizes.
Body Size
Typical Applications
®
X Min.
Y Min.
Single
0.120in 0.110in
Testing (3.1mm) (2.8mm)
Adjacent 0.325
0.285
Testing (8.3mm) (7.2mm)
PLCC Pin Breakout
Y
5279
20
5X5
5280
28
7X7
5733
32
7X9
5281
44
11 X 11
5312
52
13 X 13
5401
68
17 X 17
5402
84
21 X 21
5515A
20-84
Lead Pitch: 0.050in (1.27mm)
X
0.36in X 0.36in
(9.14mm x 9.14mm)
0.46in X 0.46in
(11.68mm x 11.68mm)
0.46in X 0.56in
(11.68mm x 14.22mm)
0.63in X 0.63in
(16.00mm x 16.00mm)
0.75in X 0.75in
(19.05mm x 19.05mm)
0.95in X 0.95in
(24.13mm x 24.13mm)
1.15in X 1.15in
(29.21mm x 29.21mm)
Use these test adapters to test socket mounted
PLCC’s. The PLCC test adapter is placed between the
socket and the PLCC, 0.025in (0.635mm) square pins
at 0.10in (2.54mm) spacing allow easy access testing
for all leads of the PLCC. An overlay template provides
easy pin identification.
Intel 85C220
Intel 5C60, 85C224, Philips
8XC751, Raytheon TMC1173
AMD 29F040, Xicor X28TC256,
Cypress CY7B991
AMD MACH110, 80C88,
Seimens SAB-C501
Intel 87C196, 87C196,
Motorola 68008
Intel 80C188, AMD MACH220,
Hitachi H8/330
AMD MACH130, Altera EPF8452,
Cirrus Logic CLi6005
PLCC Clip Kit containing
1 of each size PLCC Clip
Model#
5451
5878
5452
5453
5454
No. Leads
28
32
44
52
68
Lead Pitch: 0.100in (2.54mm).
www.pomonaelectronics.com
IC Test Clips and Adapters
90
DIP Test Clips
Fig. 1
Fig. 2
Oxide Penetrating
Dip Clips (Fig. 1)
No. of
Model#
Pins
5692
16
Model#
No.
Leads
Chip
Width
Contact
Style
Contact
Material
5108
5208
5014
5214
5114
5314
3916A
5116
4236A
5216
5120
5220
4124A
5124
4324A
5224
4140A
8
8
14
14
14
14
16
16
16
16
20
20
24
24
24
24
40
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.3in (7.62mm)
0.6in (15.24mm)
0.6in (15.24mm)
0.6in (15.24mm)
0.6in (15.24mm)
0.6in (15.24mm)
Closed
Open
Closed
Closed
Open
Open
Closed
Closed
Open
Open
Closed
Open
Closed
Closed
Open
Open
Closed
Gold Plate
Gold Plate
Nickel Silver
Gold Plate
Nickel Silver
Gold Plate
Nickel Silver
Gold Plate
Nickel Silver
Gold Plate
Gold Plate
Gold Plate
Nickel Silver
Gold Plate
Nickel Silver
Gold Plate
Nickel Silver
4340A
5240
40
40
0.6in (15.24mm)
0.6in (15.24mm)
Open
Open
Nickel Silver
Gold Plate
Pomona DIP Test Clips provide fast, reliable and
secure connections to socketed and through-hole
DIP chips. Available in two styles, DIP Test Clips give
you the option of full coverage of clip contacts for
maximum durability or open contacts at the board
level for easier access to chip leads.
SOIC/SOJ Test Clips
A
A
B
B
B
Fig. 1
Fig. 2
Fig. 3
SOIC Clip® test clips feature a narrow-profile design that makes testing SOIC and SOJ chips on denselypopulated boards easier and safer.
on surface mounted chips with gull
wing or “J” leads. Compact design
is ideal for testing on densely-populated boards.
Fig. 1: Spring-loaded SOIC Clip®
attaches to target chip and holds
on with spring pressure against the
chip body. Contacts on top of the
clip are 0.025in (0.635mm) pins at
0.10in (2.54mm) spacing. Designed
to attach to surface-mounted chips
with either gull wing or “J” leads.
Fig. 3: New 32-, 40- & 44-pin
SOIC/SOJ test clip is a new design
of the spring-loaded clip that features double-row .025 wire wrap
pins for easy connection to ribbon
cable. This clip will fit all SOIC/SOJ
chips between 0.30in (7.62mm)
and 0.60in (15.24mm) width.
Fig. 2: This 14-pin clip features a Lead Pitch: 0.050in (1.27mm).
slider that presses the contact
housings against the chip and
provides a more secure connection
www.pomonaelectronics.com
Motorola 68HC11
Analog Devices AD7715
Intel 85C220
Intel 85C224, 85C22C10
Mitsubishi M66251
Dallas DS80C320, Goldstar
GM82V765B1, Phillips 87C575
Fig.
1
2
1
1
2
2
1
1
2
2
1
2
1
1
2
2
1
2
2
Fig.1: Spring-actuated clip features gold-plated
beryllium copper or spring-tempered nickel silver
pins to assure positive contact in a firm wiping action
for hands-free testing.
Fig. 2: Clip features same construction as Figure 1
except for an opening on the outside of the contact
housing to permit probing while the clip is attached
to the DIP.
No.
Leads
Lower
Width (A)
Body
Widths
Top
Width (B)
Typical
Applications
5250
8
5251
14
5413
14
5252
16
5253
20
5254
24
5437
28
6107
32
6108
40
0.430in
(10.92mm)
0.755in
(19.18mm)
0.520in
(13.20mm)
0.830in
(21.08mm)
1.030in
(26.16mm)
1.230in
(31.24mm)
1.430in
(36.32mm)
0.870in
(22.10mm)
1.070in
(27.18mm)
1.170in
(29.72mm)
3
44
0.15in to 0.3in
(3.81mm to 7.62mm)
0.15in to 0.3in
(3.81mm to 7.62mm)
0.15in
(3.81mm )
0.15in to 0.3in
(3.81mm to 7.62mm)
0.15in to 0.3in
(3.81mm to 7.62mm)
0.15in to 0.3in
(3.81mm to 7.62mm)
0.15in to 0.3in
(3.81mm to 7.62mm)
0.30in to 0.60in
(7.62mm to 15.24mm)
0.30in to 0.60in
(7.62mm to 15.24mm)
0.30in to 0.60in
(7.62mm to 15.24mm)
Analog Devices AD834JR,
Triquint TQ9122N
Motorola HCT08A,
Philips 74HC125
Harris HFSP43280,
Goldstar GM76C256
Maxim MAX791, Microlinear
ML6509, AMD 26LS31
Linear Tech. LT1130, Maxim
MX7226, Motorola HCT373A
Altera EP610APC, Linear Tech.
LT1130, Motorola MC22V10S
Texas Inst. SN74F32D, Altera
EPM5032, Raytheon TMC1171
Toshiba TMPN3120, Hitachi
HM628128, NEC D431000AGW
—
6109
0.26in
(6.60mm)
0.410
(10.41mm)
0.410
(10.41mm)
0.460
(11.68mm)
0.560
(14.22mm)
0.660
(16.76mm)
0.760
(19.30mm)
0.870
(22.10mm)
1.070
(27.18mm)
1.170
(29.72mm)
—
3
Model#
A
Typical Applications
5514
SOIC Clip® Test Kit contains
1 each 8 - 28 pin clips
Fig.
1
1
2
1
1
1
1
3
Static Control Products
Working with static sensitive devices? Pomona enables you to work with
confidence when using our static control accessories. Whether you choose
to purchase our selection of grounding systems or build your own ESD set-up,
Pomona gives you a variety of individual accessories. Our accessories also make a
perfect addition to our Test Companion Kits.
91
Large Service Kit
Model# 6088
Adjustable Elastic Wrist
Strap Kit
Provides a larger working area than
Model 6087. This kit provides a staticsafe 24in x 24in (609.6mm x 609.6mm)
laminated red vinyl mat. The mat
includes a 10mm snap socket and two
8in x 11in (203.2mm x 279.4mm)
pockets. Carry those often used tools
right with the mat. A common point
ground connector with two Banana Plug
Jacks and a 15ft (4.5m) ground lead.
An adjustable elastic wrist strap and a
resistive coil cord complete the kit.
Folds down to fit into your tool box.
A complete wrist strap kit features
adjustable elastic wrist strap. Also included: Resistive Coil Cord (1MΩ resistor
molded in) extendable to 6ft (1.8m) with a
Straight Banana Plug and Alligator Clip.
Wrist Strap Tester
Field Service Kit
Model# 6082
Model# 6086
Model# 6087
Test any wrist strap connected to utility
ground with a simple touch. The tester
has two Banana Plug Sockets for Wrist
Strap cord attachments. Once connected,
the user simply touches the unit and a
green light and audible sound indicate a
proper ground. (Audible indicator has
selectable on or off).
A complete and durable service kit for
static sensitive work. Features a staticsafe 18in x 22in (460mm x 558.8mm)
laminated red vinyl mat. The kit includes
a mat with two 0.39in (10mm) snap
sockets, common point ground connector with two Banana Plug Jacks and a
15ft (4.5m) ground lead, an adjustable
elastic wrist strap and a resistive coil
cord. Folds down to fit into your tool kit.
The tester can be mounted near your
work area with Velcro® strips (supplied)
or, using an integral button 10mm snap
stud, attached directly to your static-safe
work mat. Powered by a 120 VAC wall
adapter (supplied), the tester has a
“Power on” indicator. It is practical for
both a quick test or as a continuous
ground point connection. UL listed.
Model# 6088 and 6087
Mat Color: Red.
Thickness: 0.018in (0.46mm).
Surface Resistivity: 108 to 109 Ω / Sq.
Touch Type On-Demand Tester and
Common Point Ground.
Volume Resistivity: 109 Ω cm.
Static Decay: 0.01sec 5000V to 0V
12%RH.
Wrist Straps
Adjustable Metal Wrist
Strap Kit
Model#
Circumference – Min.
6083 Adjustable
5.5in (139mm)
13in (330.2mm)
7.3in (185mm)
13in (330.2mm)
6.5in (165mm)
12in (304mm)
Model# 6084
5528 Large Expand
Complete wrist strap kit features the
adjustable metal wrist strap. Also
included: Resistive Coil Cord
(1MΩ resistor molded in)
extendable to 6ft (1.8m) with
a Straight Banana Plug and
Alligator Clip.
5529 Medium Expand
Sizes
Made of non-allergenic stainless steel, each link
has a 0.08in (2mm) PVF film laminated on top for
electrical insulation. Quick and easy adjustment
without tools, the wrist strap will fit most users.
A standard 0.16in (4mm) snap stud allows attachment to resistive coil cords.
Material: Band: Stainless steel / PVF Insulation.
Cover: Thermoplastic.
Wrist Circumference: 5.5in to 13.0in
(139.7mm x 330.2mm).
Width: 0.63in (16.0mm).
www.pomonaelectronics.com
Static Control Products
92
Ring Terminal
Model# 5531
Antistatic Ground Cord
with RT ANG B-Plug
Attach this terminal to table or cabinet
to create a banana jack for grounding
wrist strap. Screw hole accepts up to
#10 screw.
Stacking Snap
Banana Jack
These patch cords feature a molded-in
1 Megohm resistor at the snap end.
The 5534 has a straight banana plug,
the 6085 has a right angle plug.
Nominal extended length is 72in
(183cm).
Model# 5532
Attach this jack to either banana snap
stud (male) or banana snap socket
(female). It allows multiple attachment
to the same grounding point. Snap is
3/8in (9.52mm).
Material: High conductivity copper
with tin plated finish.
Antistatic Ground Cord
Model# 6085
Model# 5534
These patch cords feature a molded-in
1 Megohm resistor at the snap end.
The 5534 has a straight banana plug,
the 6085 has a right angle plug.
Nominal extended length is 72in
(183cm).
www.pomonaelectronics.com
Adjustable Elastic
Wrist Strap
Model# 6081
An adjustable, one size fits all, wrist
strap. The wristband features a dual
stainless steel cam that securely locks
the plastic band, but allows easy
adjustment without tools. The washable
fabric band has silver impregnated
nylon threads knitted into its inner
surfaces. Only non-allergenic stainless
steel and silver touch the skin.
Standard 4mm snap stud allows
attachment to resistive coil cords
(Pomona modles 5534 and 6085).
Wrist circumference: 2.5in (64mm)
to 13in (330mm).(183cm).
Telecom Products
Accuracy and repeatability – Pomona connects to the telecom industry
with an impressive selection of test accessories. Ideal for network
testing, troubleshooting, leave-in-the-line patching, or system
prototyping, Pomona Electronics’ traditional reliability adds up to
the quality connection telecom professionals demand.
93
Universal DSX-3 Test Kit
Model# 6568
• Ideal for OSP/CO technicians.
• Kit reduces the need for multiple cables to service
and test DSX-3 panels.
• Adapters quickly convert BNC cables to Mini or
Standard WECO interfaces.
• Cables are color coded blue (transmit) and red
(receive) for ease of testing.
• Strain reliefs are molded directly to the cable and
BNC plugs for added pull strength.
• Test Companion pouch allows for convenient
accessory storage.
Kit includes:
One blue BNC Male Cable Assembly
One red BNC Male Cable Assembly
Four Standard WECO to BNC Adapters
Four Mini-WECO to BNC Adapters
Test Companion Shoulder Pack
True 75Ω BNC Male Cable
Model#
Length
6510-V-12-0
6510-V-24-0
6510-V-36-0
6510-V-48-0
6510-V-60-0
6510-V-72-0
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in(1.5m)
72in (1.8m)
True 75Ω BNC Cable
(Transmit/Receive)
BNC connectors are perfectly
matched to 75Ω impedance for
superior VSWR & return loss
performance.
Model#
Length
Color
6510-V-72-2
6510-V-72-6
72in (1.8m)
72in (1.8m)
Red
Blue
Cable and Strain Relief are color coded red
and blue for easy identification of transmit
and receive lines.
Cable Type: High Flex, Multi-strand center
conductor, RG59 Type.
Ideal for digital video and
telecommunication applications.
Cable Type: High Flex,
Multi-strandcenter conductor,
RG59 Type, Black.
BNC Male to Bantam
Plug Cable
Model#
Length
6517-96
96in (2.4m)
Cable Type: RG59 Type.
Bantam: Nickel-plated brass.
Ratings: The components in this section have a hands free rating for use in controlled voltage environments.
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
www.pomonaelectronics.com
Telecom Products
94
BNC Female to WE309/
WE310 Plug Adapters
Model#
Plug Type
2798
1794
WE310
WE309
BNC Female to Mini/Standard
TO WECO Plug Adapters
Model#
Plug Type
6519
5008
Mini WECO
Std. WECO
Permits BNC male to be used with
equipment having Std. WECO or
Mini WECO plugs.
Rating: Hands free testing in
controlled environment: 500V Peak*,
+122°F (+50°) max.
Rating: Hands free testing in controlled environment: 500 Vrms*,
+216°F (+102°C) max.
BNC Female to Bantam
Plug Adapters
Model# 4719
Rating: Hands free testing in
controlled environment: 500V Peak*,
+122°F (+50°) max.
Convert Bantam style jacks to BNC.
Mini-WECO Plug Patch Cord
Model#
Length
6502-96
96in (2.4m)
Cable Type: RG59 Type.
75Ω BNC Male to Mini-WECO
Connector Cable
Model#
Length
6515-96
96in (2.4m)
Cable Type: RG59 Type.
Bantam Plug Patch Cord
75Ω BNC Male to Standard
WECO Connector Cable
Model#
Length
6516-96
96in (2.4m)
Cable Type: RG59 Type.
Model#
Length
4279-12
4279-24
4279-36
4279-48
4279-60
4279-72
4279-96
4279-120
12in (0.3m)
24in (0.6m)
36in (0.9m)
48in (1.2m)
60in (1.5m)
72in (1.8m)
96in (2.4m)
120in (3.0m)
Model#
Length
4279N-24
4279N-36
4279N-60
24in (0.6m)
36in (0.9m)
60in (1.5m)
Bantam Plug:
4279: Unplated brass.
4279N: Nickel-plated brass.
Rating: Hands free testing in
controlled environment: 300 Vrms*,
+122˚F (+50˚C) max.
Cable Type: 2 Conductor Shielded
Twisted Pair, 0.180in (4.57mm) O.D.
www.pomonaelectronics.com
*see rating message at start of section.
Telecom Products
Bantam Plug to Two
Alligator Clips
Model#
Length
5026-36
5026-60
36in (0.9m)
60in (1.5m)
Model#
Length
5026N-60
60in (1.5m)
Bantam Plug to Three
Alligator Clips
Model#
Length
6321-96
96in (2.4m)
Bantam Plug: Nickel-plated brass.
Rating: Hands free testing in
controlled environment: 150Vrms*.
Cable Type: 2 Conductor Shielded
Twisted Pair.
Bantam Plug:
5026: Unplated brass.
5026N: Nickel-plated brass.
Rating: Hands free testing in
controlled environment: 150 Vrms*,
+122˚F (+50˚C) max.
Cable Type: 2 Conductor Shielded
Microphone, 0.180in (4.57) O.D.
Bantam Plug to Minigrabber ®
Test Clips
Model#
Length
5019-60
60in (1.5m)
Model#
Length
5019N-60
60in (1.5m)
Bantam Plug to
Micrograbber® Test Clips
Model#
Length
4778-60
60in (1.5m)
Bantam Plug: Unplated brass.
Rating: Hands free testing in
controlled environment: 150 Vrms*,
+122˚F (+50˚C) max.
Bantam Plug:
5019: Unplated brass.
5019N: Nickel-plated brass.
Cable Type: 2 Conductor Shielded
cable, 0.180in (4.57mm) O.D.
Rating: Hands free testing in
controlled environment: 300 Vrms*,
+122˚F (+50˚C) max.
Cable Type: 2 Conductor Shielded
cable, 0.180in (4.57) O.D.
Bantam Plug to Double
Banana Plug
Model#
Length
6523-96
96in (2.4m)
Bantam Plug to Double
Banana Plug, Balanced Line
Model#
Length
4281-60
60in (1.5m)
Bantam Plug: Nickel-plated brass.
Bantam Plug: Unplated brass.
Cable Type: RG59 Type.
Rating: Hands free testing in
controlled environment: 500V Peak*,
+131˚F (+55˚C) max.
Cable Type: 2 Conductor Shielded
Microphone, 0.180in (4.57mm) O.D.
*see rating message at start of section.
www.pomonaelectronics.com
95
Telecom Products
96
Bantam Plug to RJ11
Connector Cable
Model#
Length
6323-96
96in (2.4m)
Bantam (Female) to WE310
Plug Adapter
Model#
Plating
4993
6315
Unplated
Nickel
Bantam Plug: Nickel-plated brass.
Rating: Hands free testing in
controlled environment: 300 Vrms.
Plug Body: Brass.
Cable Type: 2 Conductor Shielded
Twisted Pair.
bantam cable into a WE310
plug-end patch cable.
3 Conductor adapter. Converts
Pin out: 3-Ring, 4-Tip
Dual Bantam Plug
Patch Cable
Bantam Plug to RJ48/RJ45
Connector Cable
Model#
Length
6331-96
96in (2.4m)
Model#
Length
Bantam Plugs: Nickel-plated brass.
6324-96
96in (2.4m)
Rating: Hands free testing in
controlled environment: 300 Vrms*.
Bantam Plug: Nickel-plated brass.
Cable Type: 4 Conductor Shielded
Twisted Pair.
Rating: Hands free testing in
controlled environment: 300 Vrms*.
Cable Type: 2 Conductor Shielded
Twisted Pair.
Pin Out: 4-Ring, 5-Tip.
Bantam or WE310 Plug to
Binding Post
Two Single Bantam Plugs
To RJ48/RJ45 Connectors
Model#
Length
6320-96
96in (2.4m)
Model#
Plug Type
2112
5001
WE310
Bantam
Rating: Hands free testing in
controlled environment: 500V Peak*,
+122°F (+50°C) max.
Bantam Plug: Nickel-plated brass.
Adapts Bantam or WE310 style
equipment to binding posts and
double banana plugs.
Rating: Hands free testing in
controlled environment: 300 Vrms*.
Cable Type: 2 and 4 Conductor
Shielded Twisted Pair. Bantam "Y"
(Tx and Rx) to RJ48 modular plug.
Pin out: 1-Ring, 2-Tip, 4-Ring,
5-Tip.
WE310 Plug to Double
Banana Plug Cable
Model#
Length
6524-96
96in (2.4m)
Cable Type: RG59.
Bantam Plug to WE310
Plug Patch Cable
Model#
4280-36
4280-48
4280-60
4280-96
4280N-48
4280N-60
Length
36in (0.9m)
48in (1.2m)
60in (1.5m)
96in (2.4m)
48in (1.2m)
60in (1.5m)
WE310 and Bantam Plugs:
4280: Unplated brass.
4280N: Nickel-plated brass.
Rating: Hands free testing in
controlled environment: 300 Vrms*,
+122˚F (+50˚C) max.
Cable Type: 2 Conductor Shielded
Twisted Pair, 0.180in (4.57mm) O.D.
www.pomonaelectronics.com
*see rating message at start of section.
Telecom Products
WE310 Plug to Two
Alligator Clips
Model#
Length
3352-A-36
3352-A-60
3352-A-84
36in (0.9m)
60in (1.5m)
84in (2.1m)
Piercing Clips to
Sheathed Banana
Test Leads
Clip Type
Length
6483-48-*
Bed of Nails and
Single Needle
Bed of Nails
48in
(1.2m)
48in
(1.2m)
6485-48-*
WE310 Plug:
3352: Unplated brass.
3352N: Nickel-plated brass.
Pierces 19 to 26 AWG Wire.
Rating: Hands free testing in
controlled environment: 150 Vrms*,
+122˚F (+50˚C) max.
For use with DMM's from Fluke, Wavetek
(Meterman), Amprobe, Greenlee and others.
Wire: 18 AWG Silicone Test Lead Wire.
*Colors: -0 Black, -2 Red, -02 includes both
Black and Red.
Cable Type: 2 Conductor Twisted
Pair, 0.250in (6.35mm) O.D.
WE310 Plug to Minigrabber®
Test Clips
Model#
Model#
4812-J-60
Length
60in (1.5m)
Piercing Clip Styles for Test
Leads and Patch Cords
WE310 Plug: Unplated brass.
Bed of Nails/Single Needle
Bed of Nails
Rating: Hands free testing in
controlled environment: 300 Vrms*,
+122˚F (+50˚C) max.
Small wire and single penetration
of heavier wire.
Small wire penetration.
Cable Type: 2 Conductor Shielded
Twisted Pair.
Two Single WE310 Plugs
to RJ48/RJ45 Plug
Model#
Length
6316-96
96in (2.4m)
WE310 Plugs: Nickel-plated brass.
Rating: Hands free testing in
controlled environment: 300 Vrms*.
Cable Type: 2 and 4 Conductor
Shielded Twisted Pair.
Piercing Clips to
Bantam Plugs
Patch Cord
310 "Y" (Tx and Rx) to RJ48
modular plug.
Pin out: 1-2-4-5 (4 Conductor),
4-5 (2 Conductor).
Model#
Clip Type
Length
6484-60
Bed of Nails and
Single Needle
Bed of Nails
60in
(1.52m)
60in
(1.52m)
6486-60
Cable: Two Conductor Twisted Pair.
Breakout Wire: 18 AWG.
66 Block Adapter to
Alligator Clip
Model#
Length
6336-96
96in (2.4m)
Rating: 300 Vrms.
284-1 plug connects to punch down
pins on 66 blocks and RJ21's.
Wire: 18 AWG, silicone insulation.
*see rating message at start of section.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
www.pomonaelectronics.com
97
Telecom Products
98
BNC Female to WE310
Phone Plug
0.25in (6.35mm)
0.50in (12.70mm)
Model# 2798
Rating: Hands free testing in
controlled environment: 500V Peak*,
+122˚F (+50˚C) max.
BNC Female to Mini-WECO
Plug Adapter
Rating: Hands free testing in
controlled environment: 500V Peak,.
+216°F (+102°C) max.
0.38in
(9.65mm)
2.125in (53.85mm)
Permits BNC male to be used with
equipment having mini-WECO jacks.
Video plug equivalent to WE-090.
2.90in (73.66mm)
BNC Female to
Bantam Phone Plug
0.50in (12.70mm)
Model# 6519
Model# 4719
0.173in (4.40mm)
BNC Female to Standard
WECO Plug Adapter
Rating: Hands free testing in
controlled environment: 500V Peak*,
+216˚F (+102˚C) max.
Rating: Hands free testing in
controlled environment: 500V Peak*,
+122˚F (+50˚C) max.
Convert Bantam style jacks to BNC.
Model# 5008
0.38in
(9.65mm)
2.83in (71.88mm)
Permits BNC male to be used with
equipment having standard WECO
jacks.
2.63in (66.80mm)
Video plug equivalent to WE-090.
Bantam Phone Jack to
WE310 Phone Plug
0.25in (6.35mm)
Model# 4993
BNC Female to WE309
Phone Plug
Rating: Hands free testing in
controlled environment: 500V Peak*.
Use cords with Bantam style plugs
on equipment with WE-310 jacks.
3.27in (83.06mm)
0.206in (5.23mm)
0.50in (12.70mm)
Model# 1794
Rating: Hands free testing in
controlled environment: 500V Peak*,
+122˚F (+50˚C) max.
2.89in (73.41mm)
Stackable Binding Posts
to Bantam Phone Plug
Model# 5001
Rating: Hands free testing in
controlled environment: 500V Peak,
+122˚F (+50˚C) max.
0.173in (4.40mm)
0.75in
(19.05mm)
Stackable Binding Posts
to WE310 Phone Plug
2.74in (69.60mm)
open
www.pomonaelectronics.com
Rating: Hands free testing in
controlled environment: 500V Peak*,
+122˚F (+50˚C) max.
0.25in (6.35mm)
Adapts Bantam style equipment to
binding posts and double banana
plugs.
Model# 2112
0.75in
(19.05mm)
3.11in (79.00mm)
open
*see rating message at start of section.
Temperature Probes
Pomona connects you to quality temperature readings with a versatile
selection of interchangeable J, and K-Type thermocouple probes
designed to fit a variety of applications.
All of these probes are compatible with K-type digital thermometers
or DMM’s with a temperature function.
99
General Purpose Temperature Probe with Round Tip
Model#
Calibration
6367
K-Type
General purpose probe for gas, air, gel and
liquid measurements.
Measurement Range: -40 to 500°F
(-40 to 260°C).
Temperature Tolerance: ±3.9°F (±2.2°C) or
0.75%.
Probe Length: 6in (152.4mm); O.D. 0.125in
(3.18mm).
Cable Length: 48in (1.22m).
Extended Range General
Purpose Temperature Probe
Model# 6373
General purpose probe for gas, air, gels and
liquid measurements.
Measurement Range: -320 to 1994°F
(-196 to 1090°C).
Temperature Tolerance: ±3.9°F (±2.2°C) or
0.75%.
Probe Length: 8in (0.2m); O.D. 0.125in
(3.18mm).
Cable Length: 48in (1.22m).
K-Type.
Extended Length Temperature Probe
Model#
Calibration
6371
K-Type
Conveniently attaches to our Mini-Connector
Extension Cable (Model 6539 and 6379).
Measurement Range: -40 to 2000°F
(-40 to 1093°C).
Temperature Tolerance: ±3.9°F (±2.2°C) or
0.75%.
Probe Length: 12in (0.3m); O.D. 0.070in
(1.78mm).
www.pomonaelectronics.com
Temperature
100
Thermocouple
Extension Wire Kit
Model#
Calibration
Temp. Range
6540K
K-Type
-40 to 500°F
(-40 to +260°C)
Surface Temperature Probe
Model# 6376
Ideal for measuring surface temperatures in a lab or more rugged
environment.
Kit includes one pair of mini-connectors
(male and female) and thermocouple wire
(unassembled).
Measurement Range: 32 to 500°F
(0 to 260°C).
Length: 118in (3m).
Temperature Tolerance: ±3.9°F
(±2.2°C) or 0.75%.
Probe Length: 4in (0.10m); O.D.
0.125in (3.18mm).
Cable Length: 48in (1.22m).
K-Type.
Temperature Probe
with Thermocouple
Bead Tip
Model#
Calibration
Temp. Range
6378
K-Type
6536
J-Type
-40 to 500°F
(-40 to +260°C)
+32 to 500°F
(0 to +260°C)
Do-It-Yourself Male
Mini-Connector
Model#
Calibration
Temp. Range
6372
K-Type
6559
J-Type
-40 to 500°F
(-40 to +260°C)
-40 to 500°F
(-40 to +260°C)
General purpose probe for air and surface
measurements.
Male mini-connector with Isothermal screw terminal
for attachment to thermocouple wire (max. 20 AWG).
Temperature Tolerance: ±3.9°F (±2.2°C) or
0.75%
Measurement Range: -40 to 400°F (-40 to 204°C).
Temperature Tolerance: ±3.9°F (±2.2°C) or 0.75%.
Cable Length: 39in (0.99m).
Thermocouple
with Selfadhesive
Backing
Model#
6542K-48
Calibration
Length
Temp. Range
K-Type
48in (1.22m)
-4 to 392°F
(-20 to +200°C)
Designed for fast surface temperature measurements.
Do-It-Yourself
Female
Mini-Connector
Model#
Calibration
Temp. Range
6380
K-Type
6562
J-Type
-40 to 500°F
(-40 to +260°C)
-40 to 500°F
(-40 to +260°C)
Self-adhesive backing for easy
placement and removal.
Female mini-connector with Isothermal screw terminal
for attachment to thermocouple wire (max. 20 AWG).
Available in K Calibrations.
Measurement Range: -40 to 400°F (-40 to 204°C).
Temperature Tolerance: ±3.9°F (±2.2°C) or 0.75%.
100
www.pomonaelectronics.com
Category Index
Category
Page#
Adapters
Adapter Accessories. . . . . . . . . . . . . . . . . . . 18-22
Adapter Kit, Coaxial Cable . . . . . . . . . . . . . . 18-22
Banana Jack and Plug . . . . . . . . . . . . . . . . . 30-41
[see separate Banana Plugs & Jacks section]
Banana to Connector Pin and Socket . . . . . 40-41
Banana to Pin Tip . . . . . . . . . . . . . . . . . . . . . . 41
Banana Plug to Phono Jack . . . . . . . . . . . . . . . 85
Bantam to Binding Post. . . . . . . . . . . . . . . . 96, 98
Bantam to WE310 . . . . . . . . . . . . . . . . . . . . . . . 96
BNC Dust Cap . . . . . . . . . . . . . . . . . . . . . . . . . . 22
BNC to 1/4in Phone Plug. . . . . . . . . . . . . . . . . . 84
BNC to 3.5mm Plug. . . . . . . . . . . . . . . . . . . 84, 85
BNC to Banana Plug . . . . . . . . . . . . . . . . . . . . . 20
BNC to Bantam . . . . . . . . . . . . . . . . . . . . . . . . . 98
BNC to Binding Post . . . . . . . . . . . . . . . . . . . . . 20
BNC to BNC . . . . . . . . . . . . . . . . . . . . . . . . . 18, 22
BNC to F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
BNC to Micro Phone Plug . . . . . . . . . . . . . . . . . 85
BNC to Mini Phone Plug . . . . . . . . . . . . . . . . . . 84
BNC to N . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 28
BNC to Phone Plug . . . . . . . . . . . . . . . . . . . 84, 85
BNC to Phono Jack . . . . . . . . . . . . . . . . . . . . . . 84
BNC to SMA. . . . . . . . . . . . . . . . . . . . . . . . . 18, 28
BNC to TNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BNC to Tini Plug . . . . . . . . . . . . . . . . . . . . . 84, 85
BNC to Triax. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BNC to UHF . . . . . . . . . . . . . . . . . . . . . . . . . 18, 28
BNC to WE309 . . . . . . . . . . . . . . . . . . . . . . . . . 98
BNC to WE309 / 310 . . . . . . . . . . . . . . . . . . . . . 98
BNC to WECO . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Coaxial Adapters and Kits. . . . . . . . . . . . . . . 18-22
Coaxial Connectors and Adapters. . . . . . . . . 18-29
F to F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
N to N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 26
Oscilloscope Probe Tip. . . . . . . . . . . . . . . . . 79-82
Phone Plug 1/4in to Banana Plug . . . . . . . . . . . 85
Phone Plug to Banana Plug . . . . . . . . . . . . . . . 85
Safety Banana Jack to Banana Plug. . . . . . . . . . 31
SMA to “N” . . . . . . . . . . . . . . . . . . . . . . . . . 18, 28
SMA to SMA . . . . . . . . . . . . . . . . . . . . . . . . 18, 24
SMA to TNC . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Terminal Strip to Banana Jack . . . . . . . . . . 34, 35
Test Probe, DMM . . . . . . . . . . . . . . . . . . . . . 58-71
Thermocouple . . . . . . . . . . . . . . . . . . . . . . 99-100
Pin Tip to Banana . . . . . . . . . . . . . . . . . . . . . . . 41
TNC to TNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Triax to Triax . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 27
Type N to BNC . . . . . . . . . . . . . . . . . . . . . . . 18, 28
Universal Kits . . . . . . . . . . . . . . . . . . . . . . . . 18-22
WE310 to Binding Post . . . . . . . . . . . . . . . . . . . 98
Alligator Clips, Regular Size
To Banana Jack . . . . . . . . . . . . . . . . . . . . . . 69, 74
Breakout to BNC . . . . . . . . . . . . . . . . . . . . . 15, 17
DMM Test Lead . . . . . . . . . . . . . . . . 97, 64, 48-50
Extra Large . . . . . . . . . . . . . . . . . . . . . . . . . 68, 74
Patch Cord to Alligator Clip . . . . . . . . . . . . . 48-50
Patch Cord to Bantam . . . . . . . . . . . . . . . . . 94-96
Patch Cord to BNC . . . . . . . . . . . . . . . . . . . 15, 17
Patch Cord to 1000V Alligator Clip. . . . . . . . 48-50
Category
Page#
Alligator Clips, Mini
To 2mm Banana Jack . . . . . . . . . . . . . . . . . 74, 77
Breakout to BNC . . . . . . . . . . . . . . . . . . . . . 15, 17
DMM Test Lead . . . . . . . . . . . . . . . . . . . . . . 48-50
Patch Cord to Banana, double . . . . . . . . . . . . . . 46
Patch Cord to Banana, single. . . . . . . . . . . . . . . 49
Patch Cord to Banana, mini, double . . . . . . . . . 46
Patch Cord to Mini Alligator Clip . . . . . . . . . 46, 49
Patch Cord to Mini Grabber. . . . . . . . . . . . . . . . 48
To Pin Tip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Alligator Clips, Micro
Patch Cord to Micro Alligator Clip . . . . . . . . . . 46, 49
Attenuators
BNC Attenuator . . . . . . . . . . . . . . . . . . . . . . . . . 21
Audio
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83-85
XLR Connecter . . . . . . . . . . . . . . . . . . . . . . . 83-85
Automotive
Automotive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Backprobe Pin . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Connector Test Probe . . . . . . . . . . . . . . . . . . . . 86
Connector Test Socket . . . . . . . . . . . . . . . . . . . . 86
Lead Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Piercing Probes . . . . . . . . . . . . . . . . . . . . . . . . . 86
Test Pins and Sockets . . . . . . . . . . . . . . . . . . . . 86
Banana Plugs and Jacks (Binding Posts too)
Banana Jack Mounting Base . . . . . . . . . . . . . . . 85
Banana Jack, panel mount with wire wrap . . 85-86
Banana Jack to Banana Jack . . . . . . . . . 31, 44, 69
Banana Jack to Miniature Banana Plug . . . . 37, 39
Banana Jack Miniature Panel Mount . . . . . . . . . 38
Banana Jack to Pin Tip Jack . . . . . . . . . . . . . . . 40
Banana Jack Panel Mount . . . . . . . . . . . 34, 38, 39
Banana Miniature Jack to Banana Plug . . . . . . . 39
Banana Miniature Plug Panel Mount . . . . . . 34, 35
Banana Miniature Plug Shorting Bar . . . . . . . . . 37
Banana Plug Adapters . . . . . . . . . . . . . . . . . . . . 40
Banana Plug Panel Mount . . . . . . . . . . . . . . . . . 34
Banana Plug to Pin Tip Plug . . . . . . . . . . . . 43, 45
Banana Plugs and Jacks. . . . . . . . . . . . . . . . 30-40
Banana Shorting Bar . . . . . . . . . . . . . . . . . . . . . 37
Binding Post. . . . . . . . . . . . . . . . . . . . . . . . . 35-41
Binding Post, Double . . . . . . . . . . . . . . . . . . . . . 36
Binding Post Miniature . . . . . . . . . . . . . . . . . . . 37
Binding Post Mounting Base . . . . . . . . . . . . . . . 35
Binding Post Shorting Bar . . . . . . . . . . . . . . . . . 36
Binding Post, Spring Loaded . . . . . . . . . . . . . . . 36
Binding Post, with Wire Wrap . . . . . . . . . . . . . . 35
Binding Post to Banana Plug . . . . . . . . . . . . . . . 41
Connector Test Probe . . . . . . . . . . . . . . . . . . . . 41
Connector Test Socket . . . . . . . . . . . . . . . . . . . . 41
Coupler . . . . . . . . . . . . . . . . . . . . . . . . . 31, 41, 69
Double Banana Plugs. . . . . . . . . . . . . . . . . . . . . 41
Double Banana Jacks, Panel Mount. . . . . . . . . . 34
Low Thermal . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Miniature Banana Jack. . . . . . . . . . . . . . . . . . . . 41
Miniature Banana Plug. . . . . . . . . . . . . . . . . 40, 44
Nut, Hex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Pin Tip Jack Panel Mount . . . . . . . . . . . . . . . . . 39
Safety Banana Jack to Banana Plug adapter. . . 31
Safety Banana, Jacks. . . . . . . . . . . . . . . 31, 34, 35
Safety Banana, panel mount . . . . . . . . . . . . . . . 39
Safety Banana Plugs . . . . . . . . . . . . . . . 31, 32, 33
Safety Banana Plug, right angle. . . . . . . . . . . . . 32
Safety Banana Plug, stackable . . . . . . . . . . . 30-31
Category
Page#
Single Banana Jacks . . . . . . . . . . . . . . . . . . . . . . . 33
Single Banana, Plugs . . . . . . . . . . . . . . . 31-33, 35
Solderless Banana Plug, double . . . . . . . . . . . . 30
Solderless Banana Plug, single . . . . . . . . . . . . . 32
Solderless Banana Plug, triple . . . . . . . . . . . . . . 31
Solderless Binding Post, double . . . . . . . . . 38, 40
Solderless Mini Banana Plug, double . . . . . . . . 36
Solderless Mini Banana Plug, single . . . . . . . . . 37
Solderless Mini Banana Plug, triple . . . . . . . . . . 36
Spade Lug . . . . . . . . . . . . . . . . . . . . . . . 39, 41, 67
Splice, Banana . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Stackable Banana Plug, double . . . . . . . . . . . . . 30
Stackable Banana Plug, single . . . . . . . . . . . . . . 32
Stackable Banana Plug, triple . . . . . . . . . . . . . . 31
Stackable Binding Post, double . . . . . . . . . . . . . 40
Stackable Mini Banana Plug, double . . . . . . . . . 36
Stackable Mini Banana Plug, single . . . . . . . . . . 37
Stackable Mini Banana Plug, triple . . . . . . . . . . 36
Stacking Banana Plug, quad, single. . . . . . . . . . 31
Test Pins and Sockets . . . . . . . . . . . . . . . . . 40-41
Triple Banana Plugs . . . . . . . . . . . . . . . . . . . . . . 31
Triple Banana Jacks, panel mount . . . . . . . . . . . 34
Boxes and Enclosures
Boxes and Enclosures . . . . . . . . . . . . . . . . . 52-57
Box, Aluminum. . . . . . . . . . . . . . . . . . . . . . . 52-56
Box, Plastic. . . . . . . . . . . . . . . . . . . . . . . . . . 56-57
Breakouts
Assemblies and Breakouts . . . . . . . . . . . . . . . 9-17
BNC to Alligator Clips . . . . . . . . . . . . . . . . . . . . 17
BNC to Banana Plug . . . . . . . . . . . . . . . . . . 16-17
BNC to Pin Tip . . . . . . . . . . . . . . . . . . . . . . . 16, 17
BNC to Spade lugs. . . . . . . . . . . . . . . . . . . . . . . 17
BNC to Square Jack . . . . . . . . . . . . . . . . . . . 16-17
BNC to Test Clips . . . . . . . . . . . . . . . . . . . . . . . . 17
BNC to Wire Lead . . . . . . . . . . . . . . . . . . . . . . . 17
Broadcast
BNC Color-Coded Sleeves . . . . . . . . . . . . . . . . . 10
BNC High Definition Coaxial Connectors . . . . . . 83
BNC Terminator . . . . . . . . . . . . . . . . . . . . . . 21, 84
Cable Assemblies
Assemblies and Breakouts . . . . . . . . . . . . . . . 9-17
Banana Miniature Plug. . . . . . . . . . . . . . . . . . . . 17
BNC Color-Coded Sleeves . . . . . . . . . . . . . . . . . 10
BNC to Alligator Clips . . . . . . . . . . . . . . . . . 15, 17
BNC to Banana Plug . . . . . . . . . . . . . . . 15, 16, 17
BNC to BNC . . . . . . . . . . . . . . . . . . . 10-12, 85, 93
BNC to N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
BNC to Phone Plug . . . . . . . . . . . . . . . . . . . . . . 14
BNC to Pin Tip . . . . . . . . . . . . . . . . . . . . . . . 16, 17
BNC to SMA. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
BNC to Spade lugs. . . . . . . . . . . . . . . . . . . . . . . 17
BNC to Square Jack. . . . . . . . . . . . . . . . . . . 16, 17
BNC to Test Clips . . . . . . . . . . . . . . . . . . 14-15, 17
BNC to TNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
BNC to UHF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
BNC to Wire Lead . . . . . . . . . . . . . . . . . . . . . . . 17
Coaxial Cable Set . . . . . . . . . . . . . . . . . . . . . . . . 86
Lead Holder . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 42
N to N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Phone Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
SMA to “N” . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SMA to SMA . . . . . . . . . . . . . . . . . . . . . . . . 12,13
Triax to Alligator Clips . . . . . . . . . . . . . . . . . . . . 13
Triax to Triax . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
UHF to UHF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
www.pomonaelectronics.com
101
Category Index
102
Category
Page#
Connectors
Banana Plugs & Jacks [see separate
Banana Plugs & Jacks section]. . . . . . . . . 30-41
Binding Post
[see Banana Plugs & Jacks section]. . . . . 35-40
BNC 75Ω . . . . . . . . . . . . . . . . . . . . . . . . 10, 21, 83
BNC Bulkhead Receptacle,
Hermetically Sealed . . . . . . . . . . . . . . . . . . . . . . 23
BNC Coaxial . . . . . . . . . . . . . . . . . . 18-24, 28, 29
BNC, Hermetically Sealed . . . . . . . . . . . . . . . . . 23
BNC High Definition. . . . . . . . . . . . . . . . . . . . . . 83
BNC, Isolated, Bulkhead Receptacle . . . . . . . . . 23
BNC Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
BNC PCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
BNC Strain Relief Boot. . . . . . . . . . . . . . . . . . . . 24
Broadcast Connectors and Adapters . . . . . . 83-85
Coaxial Connectors and Adapters. . . . . . . . . 18-29
F Coaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
F Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
F to BNC . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85
F to PCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Grabber Type Clips . . . . . . . . . . . . . . . . . 68, 72-78
N Coaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
N Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
N Terminator . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Retractable Sheath Banana Plug . . . . . . . . . . . . 50
SMA Coaxial . . . . . . . . . . . . . . . . . . 18, 24, 25, 28
SMA Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
SMA PCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
SMB Coaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Tip Pin, Plug . . . . . . . . . . . . . . . . . . . . . . . . 38, 39
Tip Pin, Panel Mount . . . . . . . . . . . . . . . . . . . . . 39
Tip Pin, Panel Mount with Wire Wrap . . . . . . . . 39
TNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 28
Triax Coaxial . . . . . . . . . . . . . . . . . . 22, 24, 26, 27
Triax Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Twinax Coaxial . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Twinax Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
XLR Connectors
(many models in Broadcast Catalog) . . . . 83-85
Crimp Tools
Crimp Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DC Blocking
BNC Blocking Capacitor. . . . . . . . . . . . . . . . . . . 21
DMM Accessories
0.04", 0.06" & 0.08" Replaceable Probe Tips . . . 65
Alligator Clips . . . . . . . . . . . 60, 61, 62, 69, 74, 75
Automotive Leads . . . . . . . . . . . . . . . . . . . . . . . 86
Backprobe Pins . . . . . . . . . . . . . . . . . . . . . . 60, 87
Banana Jack to Banana Jack . . . . . . . . . 37, 38, 66
Cases and Pouches . . . . . . . . . . . . . . . . . . . . . . 64
Couplers . . . . . . . . . . . . . . . . . . . . . . . . 31, 41, 69
Couplers, Test Lead, Banana . . . . . . . . . . . . . . . 69
DMM Accessories and Kits . . . . . . . . . . . . . 58-71
DMM Accessories Cases and Pouches . . . . . . . 64
Do It Yourself DMM Accessories. . . . . . . . . . . . 71
Kelvin Clips with Leads . . . . . . . . . . . . . . . . . . . 71
Kelvin Probe Set . . . . . . . . . . . . . . . . . . . . . . . . 71
Kit List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Piercing Alligator Clips to Banana Plug . . . . . . . 89
Piercing Probes . . . . . . . . . . . . . . . . . . . 61, 66, 86
Pogo Tip Probes . . . . . . . . . . . . . . . . . . . . . 65, 66
Probe Tip Adapter . . . . . . . . . . . 58, 59, 60, 61, 69
Probe Tips, Spring-Loaded (Pogo Pin) . . . . 65, 66
Probe Tips, Replacable . . . . . . . . . . 58, 63, 66, 67
Retractable Needle Tip Test Probes . . . . . . . . . . 65
RF Detector Test Probe . . . . . . . . . . . . . . . . . . . 70
www.pomonaelectronics.com
Category
Page#
Screw-on Alligator Clips Set . . . . . . . . . . . . . . . 65
Shielded Leads . . . . . . . . . . . . . . . . . . . . . . . . . 68
Spade Lug . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 47
Spade Lug Adapter . . . . . . . . . . . . . . . . . . . . . . 69
Spring Loaded Probe tip sets . . . . . . . . . . . . . . 63
Test Clips. . . . . . . . . . . . . . . . . . 68, 72, 73, 74, 75
Test Lead Kits . . . . . . . . . . . . . . . . . 58, 59, 60, 63
Test Lead Wire . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Test Leads and Test Lead Kits . . . . . . . . . . . . . . 67
Test Leads, Modular . . . . . . . . . . . . . . . . . . . . . 67
Test Probe RF Detector . . . . . . . . . . . . . . . . . . . 70
Test Probe Selection Table. . . . . . . . . . . . . . . . . 64
Test Probe SMD Tweezers . . . . . . . . . . . . . . . . . 70
Test Probe Tip Adapters . . . . . . . . . 58, 59, 60, 61
Test Probe with Leads . . . . . . . . . . . 65, 67, 70, 71
Test Probe, Modular . . . . . . . . . . . . . . . . . . . . . 67
Wire Piercing Test Clip. . . . . . . . . . . . . . . . . . . . 68
Wire, Test Lead . . . . . . . . . . . . . . . . . . . . . . . . . 71
Do-It-Yourself
Leads and Grabbers . . . . . . . . . . . . . . . . . . . 71-73
IC Test Clips
IC Test Clips and Adapter . . . . . . . . . . . . . . . 87-90
Kelvin Clips
Kelvin Probes, Clips with Leads. . . . . . . . . . . . . 71
Oscilloscope Probes
Differential Probe. . . . . . . . . . . . . . . . . . . . . . . . 82
Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79-82
Probes Accessory Kit . . . . . . . . . . . . . . . . . . 79-82
Probes and Accessories . . . . . . . . . . . . . . . . 79-82
RF Detector Test Probe . . . . . . . . . . . . . . . . . . . 81
SMD . . . . . . . . . . . . . . . . . . . . . . . . 73, 76, 78, 81
SMD Adapter . . . . . . . . . . . . . . . . . . . . . . . . 79-81
Patch Cords
66 Block to Alligator . . . . . . . . . . . . . . . . . . . . . 97
Alligator to Alligator. . . . . . . . . . . . . . . . . . . . . . 49
Banana Jack to Banana Plug . . . . . . . . . . . . . . . 49
Banana Jack to Minigrabber . . . . . . . . . . . . . . . 44
Banana Jack, Sheathed to Minigrabber . . . . . . 44
Banana Jack to Test Clip . . . . . . . . . . . . . . . . . . 44
Banana Plug . . . . . . . . . . . . . . . . . . . . . . . . . 30-40
Banana Plug to Maxigrabber . . . . . . . . . . . . . . 44
Banana Plug to Micrograbber . . . . . . . . . . . . . . 44
Banana Plug Miniature. . . . . . . . . . . . . . . . . . . . 43
Banana Plug Miniature to Test Clip . . . . . . . . . . 44
Banana Plug, Miniature to Minigrabber . . . . . . 51
Banana Plug to MiniPincher . . . . . . . . . . . . . . . 44
Banana Plug to Minigrabber . . . . . . . . . . . . 44, 45
Banana Plug to Alligator Clip. . . . . . . . . 46, 48, 49
Banana Plug to Pin Tip . . . . . . . . . . . . . . . . 43, 45
Banana Plug, Retractable
Sheathed to Minigrabber . . . . . . . . . . . . . . . . 50
Banana Plug, Retractable Sheathed to
Banana Plug, Retractable Sheathed . . . . . . . . . . 50
Banana Plug, Retractable Sheathed to
SMD Grabber . . . . . . . . . . . . . . . . . . . . 68, 72-78
Banana Plug, Sheathed to Extra
Large Alligator Clip. . . . . . . . . . . . . . . . . . . . . 49
Banana Plug to Square Pin Jack . . . . . . . . . . . . 50
Banana Plug to Test Clip . . . . . . 44, 45, 48, 49, 83
Banana Plug, Miniature to Standard . . . . . . . . . 43
Bantam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Bantam to Alligator . . . . . . . . . . . . . . . . . . . . . . 95
Bantam to Banana Plug . . . . . . . . . . . . . . . . . . . 95
Bantam to RJ11. . . . . . . . . . . . . . . . . . . . . . . . . 96
Bantam to RJ45 / RJ48 . . . . . . . . . . . . . . . . . . . 96
Category
Page#
Bantam to Test Clip . . . . . . . . . . . . . . . . . . . . . . 95
Bantam to WE310 . . . . . . . . . . . . . . . . . . . . . . . 96
BNC 75Ω . . . . . . . . . . . . . . . . . . . . . . . . 10, 21, 85
BNC to Alligator Clip . . . . . . . . . . . . . . . . . . 15, 17
BNC to Double Banana Plug . . . . . . . . . . . . . . . 15
BNC to BNC . . . . . . . . . . . . . . . . . . . . . . . . . 18, 22
BNC to Grabbers and Pincers . . . . . . . . . . . 14, 15
BNC to Type N . . . . . . . . . . . . . . . . . . . . . . 18, 28
BNC to Bantam . . . . . . . . . . . . . . . . . . . . . . . . . 98
BNC to Phono Plug . . . . . . . . . . . . . . . . . . . . . . 84
BNC to Pin Tip Plug . . . . . . . . . . . . . . . . . . . . . . 41
BNC to SMA. . . . . . . . . . . . . . . . . . . . . . . . . 18, 28
BNC to TNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BNC to UHF . . . . . . . . . . . . . . . . . . . . . . . . . 18, 28
BNC to WE310 . . . . . . . . . . . . . . . . . . . . . . . . . 98
BNC to WECO l . . . . . . . . . . . . . . . . . . . . . . . . . 98
Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-29
Coiled Patch Cords . . . . . . . . . . . . . . . . 43, 45, 47
Double Shielded Coax, Triaxial. . . . . . . . . . . 26, 27
Fuse Holder Banana Plug. . . . . . . . . . . . . . . . . . 43
Lead Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Large Alligator Clip . . . . . . . . . . . . . . . . . . . . . . 68
Low Thermal . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Miniature Banana Plug to Minigrabber . . . . . . . 51
Minigrabber to Pin Tip Plug. . . . . . . . . . . . . . . . 72
Type N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Patch Cords and Test Leads . . . . . . . . . . . . . 42-51
Patch Cord to 66 Block . . . . . . . . . . . . . . . . . . . 77
Patch Cord to Banana, Double. . . . . . . . . . . 45, 46
Patch Cord to Banana, Single . . . . . . 42-44, 49-51
Patch Cord to Large Alligator Clip . . . . . . . . . . . 74
Patch Cord to Spade Lug. . . . . . . . . . . . . . . 47, 51
Patch Cord to Triaxial . . . . . . . . . . . . . . . . . 13, 14
Patch Cord to WE310. . . . . . . . . . . . . . . . . . 94-98
Pin Tip . . . . . . . . . . . . . . . . . . . 17, 39, 40, 43, 74
Pin Tip to Test Clip . . . . . . . . . . . . . . . . . . . . . . 50
Retractable Sheath Banana . . . . . . . . . . 49, 50, 51
Retractable Sheathed Banana
Plug to Minigrabber . . . . . . . . . . . . . . . . . . . . 50
Retractable Sheathed Banana Plug to
Retractable Sheathed Banana Plug . . . . . . . . . . 50
Retractable Sheathed Banana
Plug to SMD Grabber . . . . . . . . . . . . . . . . . . . 75
Sheathed Banana Jack to Minigrabber . . . . . . . 44
Sheathed Banana Plug to Extra
Large Alligator Clip. . . . . . . . . . . . . . . . . . . . . 49
Shielded, Double Banana . . . . . . . . . . . . . . . . . . 44
Shielded Twisted Pair, Triaxial . . . . . . . . . . . . . . 13
SMA. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 24, 28
SMD Grabber to Square Pin Jack . . . . . . . . . . . 51
SMD Test Clip . . . . . . . . . . . . . . . . . 44, 48, 73, 75
Spade Lug . . . . . . . . . . . . . . . . . . . . . . . . . . 47, 51
Spade Lug to Alligator . . . . . . . . . . . . . . . . . . . . 51
Square Pin to Banana . . . . . . . . . . . . . . . . . . . . 50
Spade Lug to Banana Plug . . . . . . . . . . . . . . . . 47
Square Pin Jack. . . . . . . . . . . . . . . . . . . . . . . . . 51
Square Pin Jack to Pin Tip. . . . . . . . . . . . . . . . . 51
Square Pin Jack to Test Clip . . . . . . . . . . . . . . . 51
Test Clip. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 50
Test Clip to Alligator . . . . . . . . . . . . . . . . . . . . . 48
Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Twisted Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
UHF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 28
WE310. . . . . . . . . . . . . . . . . . . . . . . 94, 96, 97, 98
WE310 to Alligator. . . . . . . . . . . . . . . . . . . . . . . 97
WE310 to Banana Plug . . . . . . . . . . . . . . . . . . . 96
WE310 to RJ45 / RJ48 . . . . . . . . . . . . . . . . . . . 97
WE310 to Test Clip . . . . . . . . . . . . . . . . . . . . . . 97
WECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94, 98
Category Index / Alphabetical Index
Category
Page#
Shorting Cap
BNC Shorting Cap . . . . . . . . . . . . . . . . . . . . . . . 22
SMA Shorting Cap . . . . . . . . . . . . . . . . . . . . . . . 24
Static Control
Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Patch Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Static Control. . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Tester. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Wrist Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Telecom
BNC to Bantam . . . . . . . . . . . . . . . . . . . . . . 93, 98
Bantam . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94, 96
Bantam to Alligator . . . . . . . . . . . . . . . . . . . . . . 95
Bantam to Banana Plug . . . . . . . . . . . . . . . . . . . 95
Bantam to RJ11. . . . . . . . . . . . . . . . . . . . . . . . . 96
Bantam to RJ45 / RJ48 . . . . . . . . . . . . . . . . . . . 96
Bantam to Test Clip . . . . . . . . . . . . . . . . . . . . . . 95
Bantam to WE310 . . . . . . . . . . . . . . . . . . . . . . . 96
BNC to Bantam . . . . . . . . . . . . . . . . . . . . . . . . . 98
BNC to WE310 . . . . . . . . . . . . . . . . . . . . . . 94, 98
BNC to WECO . . . . . . . . . . . . . . . . . . . . . . . 94, 98
Patch Cords . . . . . . . . . . . . . . . . . . . . . . . . . 93-97
WE310. . . . . . . . . . . . . . . . . . . . . . . . . . 94, 96, 98
WE310 to Alligator. . . . . . . . . . . . . . . . . . . . . . . 97
WE310 to Banana Plug . . . . . . . . . . . . . . . . . . . 96
WE310 to RJ45 / RJ48 . . . . . . . . . . . . . . . . . . . 97
WE310 to Test Clip . . . . . . . . . . . . . . . . . . . . . . 97
WECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94, 98
Piercing Alligator Clips to Banana Plug . . . . . . . 97
Telecom . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-98
Test Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Bantam to Binding Post. . . . . . . . . . . . . . . . 96, 98
Bantam to WE310 . . . . . . . . . . . . . . . . . . . . 96, 98
Temperature Probes
Temperature Probes . . . . . . . . . . . . . . . . . . 99-100
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Terminators
BNC Terminator . . . . . . . . . . . . . . . . . . . . . . . . . 21
SMA Terminator. . . . . . . . . . . . . . . . . . . . . . . . . 24
Test Clips
Banana Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Pin Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Solder Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Grabbers and Test Clips . . . . . . . . . . . . . . . . 72-74
Kelvin Clips with Leads . . . . . . . . . . . . . . . . . . . 71
Pin Tip to Alligator Clip . . . . . . . . . . . . . . . . . . . 74
SMD . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 75-78
Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Test Leads
Category
Page#
Alphabetical Listed Items
Alligator Clips . . . . . . . . . . . . . . . . . . . . . . 68, 69, 74
Attenuators, BNC . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Automotive Leads . . . . . . . . . . . . . . . . . . . . . . . . . 86
Backprobe Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Cases & Pouches. . . . . . . . . . . . . . . . . . . . . . . . . . 64
Coiled Patch Cords . . . . . . . . . . . . . . . . . . 43, 45, 47
Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 41, 69
Differential Oscilloscope probe . . . . . . . . . . . . . . . 82
ESD Control Products . . . . . . . . . . . . . . . . . . . 91, 92
Grabber type clips . . . . . . . . . . . . . . . . . . . . . . 72-78
Hanging Rack . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 86
Hardware, replacement . . . . . . . . . . . . . . . . . . . . . 36
Hermetically Sealed BNC . . . . . . . . . . . . . . . . . . . . 23
Kit List, DMM Test Leads. . . . . . . . . . . . . . . . . . . . 64
Low Thermal Patch Cord . . . . . . . . . . . . . . . . . . . . 41
Low Thermal Lug. . . . . . . . . . . . . . . . . . . . . . . . . . 41
Magnetic Test Lead holder. . . . . . . . . . . . . . . . . . . 86
Maxi Grabber Clips . . . . . . . . . . . . . . . . . . . . . 68, 73
Micro Grabber Clips. . . . . . . . . . . . . . . . . . . . . 73, 76
Mini Grabber Clips . . . . . . . . . . . . . . . . . . . . . . 71-74
Mini Pincer Clip . . . . . . . . . . . . . . . . . . . . . . . . 71-74
Mounting Bases, panel mount . . . . . . . . . . . . . . . . 35
Nuts, Hex, replacements . . . . . . . . . . . . . . . . . . . . 36
Piercing Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Pogo Tip Probes . . . . . . . . . . . . . . . . . . . . 65, 66, 70
Pouches & Cases. . . . . . . . . . . . . . . . . . . . . . . . . . 64
Retractable Sheath Banana Plug . . . . . . . . . . . . . . 32
RF Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Screw-on Alligator clip probes . . . . . . . . . . . . . . . 65
Shielded Leads, DMM . . . . . . . . . . . . . . . . . . . . . . 68
Shorting Link, binding post . . . . . . . . . . . . . . . . . . 36
Shorting Plugs. . . . . . . . . . . . . . . . . . . 30, 31, 37, 39
Sleeves, color-coded . . . . . . . . . . . . . . . . . . . . . . . 10
SMD Grabber Clips. . . . . . . . . . . . . . . . . . . . . . 75-78
SMD Oscilloscope Grabber Clips . . . . . 73, 76, 79-81
Spade Lugs . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 47
Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 41, 69
Spring Loaded Tip Probes . . . . . . . . . . . . . 65, 66, 70
Static Control Products . . . . . . . . . . . . . . . . . . 91-92
Strain Relief Boot. . . . . . . . . . . . . . . . . . . . . . . . . . 24
Terminators, BNC . . . . . . . . . . . . . . . . . . . . . . 21, 84
Terminators, Type N. . . . . . . . . . . . . . . . . . . . . . . . 21
Test Lead Rack Holders . . . . . . . . . . . . . . . . . . . 9, 86
Tini Plug to BNC adapter . . . . . . . . . . . . . . . . . . . . 84
Thermocouple Adapters . . . . . . . . . . . . . . . . . 99-100
Triaxial Adapters . . . . . . . . . . . . . . . . . . . . . . . 26, 27
Triaxial Connectors . . . . . . . . . . . . . . . . . . . . . 26, 27
Triaxial Patch Cords . . . . . . . . . . . . . . . . . . . . . 13-14
Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Wire Wrap Items . . . . . . . . . . . . . . . . . . . . . . . 35, 39
Wire Reference Table, Coax . . . . . . . . . . . . . . . . . . . 9
Wire Reference Table, Patch Cord and Test Lead . 42
Patch Cords and Test Leads . . . . . . . . . . . . . 42-51
Test Probes
Test Probes . . . . . . . . . . . . . . . . . . . . . . . . . 58-71
SMD Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . 70
Video
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83-85
Wire
Test Lead Wire . . . . . . . . . . . . . . . . . . . . . . . . . . 71
www.pomonaelectronics.com
103
Model Number Index
104
Model#
Page#
AL-B . . . . . . . . . . . . . . .49
B . . . . . . . . . . . . . . . . . .42
BNC-C . . . . . . . . . . . . .11
HB . . . . . . . . . . . . . . . .42
MDP . . . . . . . . . . . . . . .30
MDP-S . . . . . . . . . . . . .30
MDP-ST . . . . . . . . . . . .30
MDP-X . . . . . . . . . . . . .31
MG-B . . . . . . . . . . . . . .49
P . . . . . . . . . . . . . . . . . .51
PT080 . . . . . . . . . . . . . .50
SP150B . . . . . . . . . . . .79
1081 . . . . . . . . . . . . . . 51
1126 . . . . . . . . . . . . . . .43
1166 . . . . . . . . . . . . . .48
1167 . . . . . . . . . . . . . .45
122505A . . . . . . . . . . . .32
122506A . . . . . . . . . . . .32
1236 . . . . . . . . . . . . . .49
1269 . . . . . . . . . . . . . .20
1270 . . . . . . . . . . . . . .20
1285 . . . . . . . . . . . . . .85
1286 . . . . . . . . . . . . . .40
1296 . . . . . . . . . . . . . .20
1297 . . . . . . . . . . . . . .84
1325 . . . . . . . . . . . . . .32
1326-A . . . . . . . . . . . . .45
1326-C . . . . . . . . . . . . .45
1330 . . . . . . . . . . . . . . .30
1330-ST . . . . . . . . . . . .30
1366-C . . . . . . . . . . . . .13
1367-C . . . . . . . . . . . . .12
1368-A . . . . . . . . . . . . .45
1383-C . . . . . . . . . . . . .11
1390 . . . . . . . . . . . . . . .31
1432 . . . . . . . . . . . . . . .40
1437 . . . . . . . . . . . . . . .74
1440 . . . . . . . . . . . . . . .42
1442 . . . . . . . . . . . . . . .85
1452 . . . . . . . . . . . . . . .20
1468 . . . . . . . . . . . . . . .20
1469 . . . . . . . . . . . . . . .20
1508/POM . . . . . . . .9, 42
1581 . . . . . . . . . . . . . . .34
1614 . . . . . . . . . . . . . . .69
1658-T . . . . . . . . . . . . .13
1693 . . . . . . . . . . . . . . .47
1756 . . . . . . . . . . . . . . .47
1794 . . . . . . . . . . . .98, 94
1809 . . . . . . . . . . . . . . .40
1823 . . . . . . . . . . . . . . .31
1825 . . . . . . . . . . . . . . .32
1829 . . . . . . . . . . . .30, 31
1837 . . . . . . . . . . . . . . .31
1894 . . . . . . . . . . . . . . .20
1948-C . . . . . . . . . . . . .14
1960 . . . . . . . . . . . . . . .51
2035 . . . . . . . . . . . . . . .37
2096 . . . . . . . . . . . . . . .56
2098 . . . . . . . . . . . . . .56
2099 . . . . . . . . . . . . . . .56
Model#
Page#
2103 . . . . . . . . . . . . . . .56
2104 . . . . . . . . . . . . . . .57
2105 . . . . . . . . . . . . . . .56
2112 . . . . . . . . . . . .96, 98
2138 . . . . . . . . . . . . . . .39
2142 . . . . . . . . . . . . . . .38
2143 . . . . . . . . . . . . . . .38
2224 . . . . . . . . . . . . . . .57
2239-C . . . . . . . . . . . . .45
2240 . . . . . . . . . . . . . . .74
2244 . . . . . . . . . . . . . . .36
2247-K . . . . . . . . . . . . .46
2249-C . . . . . . . . . . .9, 10
2249-E . . . . . . . . . . . . .10
2249-K . . . . . . . . . . . . .10
2249-Y . . . . . . . . . . . . .10
2256-X . . . . . . . . . . . . .13
2256-C . . . . . . . . . . . . .13
2259 . . . . . . . . . . . . . . .56
2269 . . . . . . . . . . . . . . .34
2305 . . . . . . . . . . . . . . .41
2352 . . . . . . . . .52, 53, 54
2382 . . . . . . . . . . . . . .37
2383 . . . . . . . . . . . . . . .38
2390 . . . . . . . . . . . . . . .52
2391 . . . . . . . . . . . . . . .52
2392 . . . . . . . . . . . . . . .52
2393 . . . . . . . . . . . . . . .52
2397 . . . . . . . . . . . . . . .52
2398 . . . . . . . . . . . . . . .52
2399 . . . . . . . . . . . . . . .52
2400 . . . . . . . . . . . . . . .52
2401 . . . . . . . . . . . . . . .52
2411 . . . . . . . . . . . . . . .53
2417 . . . . . . . . . . . . . . .53
2420 . . . . . . . . . . . . . . .53
2428 . . . . . . . . . . . . . . .53
2439 . . . . . . . . . . . . . . .37
2440 . . . . . . . . . . . . . . .38
2447 . . . . . . . . . . . . . . .23
2447A . . . . . . . . . . . . . .23
2451 . . . . . . . . . . . . . . .23
2451A . . . . . . . . . . . . . .23
2455 . . . . . . . . . . . . . . .26
2477 . . . . . . . . . . . . . . .39
2484 . . . . . . . . . . . . . . .43
2630 . . . . . . . . . . . . . . .17
2631 . . . . . . . . . . . . . . .17
2708 . . . . . . . . . . . . .42, 9
2798 . . . . . . . . . . . .94, 98
2842 . . . . . . . . . . . . . . .51
2854 . . . . . . . . . . . . . . .34
2864 . . . . . . . . . . . . . .43
2882-C . . . . . . . . . . . .16
2885 . . . . . . . . . . . . . .17
2886 . . . . . . . . . . . . . .17
2894 . . . . . . . . . . . . . .41
2901 . . . . . . . . . . . . . .53
2902 . . . . . . . . . . . . . .53
2906 . . . . . . . . . . . . . .53
2944 . . . . . . . . . . . . . .37
www.pomonaelectronics.com
Model#
Page#
2945 . . . . . . . . . . . . . .37
2948 . . . . . . . . . . . . . .42
2952 . . . . . . . . . . . . . .39
2970 . . . . . . . . . . . . . .31
2BA . . . . . . . . . . . . . . .45
2BA-AL . . . . . . . . . . . . .46
2BC . . . . . . . . . . . . . . .45
2BC-BNC . . . . . . . . . .15
2BC-MG . . . . . . . . . . .46
2BC-PP . . . . . . . . . . . .45
3014 . . . . . . . . . . . . . .43
3027-K . . . . . . . . . . . . .46
3030 . . . . . . . . . . . . . .37
3073 . . . . . . . . . . . . . .17
3221 . . . . . . . . . . . . . .17
3230 . . . . . . . . . . .53, 49
3231 . . . . . . . . . . . . . . 53
3232 . . . . . . . . . . . . . . .53
3234 . . . . . . . . . . . . . .53
3239 . . . . . . . . . . . . . . 53
3257 . . . . . . . . . . . . . . 33
3258 . . . . . . . . . . . . . . 33
3261 . . . . . . . . . . . . . . 33
3263 . . . . . . . . . . . . . .33
3264 . . . . . . . . . . . . . .33
3265 . . . . . . . . . . . . . . .33
3266 . . . . . . . . . . . . . . .33
3267 . . . . . . . . . . . . . . .35
3268 . . . . . . . . . . . . . . .37
3269 . . . . . . . . . . . . . . .20
3271 . . . . . . . . . . . . . . .37
3272 . . . . . . . . . . . . . . .37
3273 . . . . . . . . . . . . . . .37
3276 . . . . . . . . . . . . . . .37
3277 . . . . . . . . . . . . . . .38
3283 . . . . . . . . . . . . . . .22
3284 . . . . . . . . . . . . . . .22
3285 . . . . . . . . . . . . . . .22
3286 . . . . . . . . . . . . . . .28
3287 . . . . . . . . . . . . . . .28
3288 . . . . . . . . . . . . . . .28
3289 . . . . . . . . . . . . . . .74
3296 . . . . . . . . . . . . . . .20
3301 . . . . . . . . . . . . . . .54
3302 . . . . . . . . . . . . . . .54
3306 . . . . . . . . . . . . . . .54
3311 . . . . . . . . . . . . . . .55
3316 . . . . . . . . . . . . . . .55
3328 . . . . . . . . . . . .54, 55
3352-A . . . . . . . . . . . . .97
3364 . . . . . . . . . . . . . . .31
3430 . . . . . . . . . . . . . . .20
3452 . . . . . . . . . . . . . . .39
3491 . . . . . . . . . . . . . . .74
3533 . . . . . . . . . . . . . . .22
3534 . . . . . . . . . . . . . . .22
3535 . . . . . . . . . . . . . . .28
3542 . . . . . . . . . . . . . . .39
3548 . . . . . . . . . . . . . . .35
3560 . . . . . . . . . . . . . . .40
3561 . . . . . . . . . . . . . . .40
Model#
Page#
3562 . . . . . . . . . . . . . . .40
3563 . . . . . . . . . . . . . . .40
3564 . . . . . . . . . . . . . . .40
3565 . . . . . . . . . . . . . . .40
3580 . . . . . . . . . . . . . . .27
3600 . . . . . . . . . . . . . . .26
3601 . . . . . . . . . . . . . .54
3602 . . . . . . . . . . . . . . .54
3603 . . . . . . . . . . . . . . .54
3606 . . . . . . . . . . . . . . .54
3690 . . . . . . . . . . . . . . .37
3719 . . . . . . . . . . . . . . .53
3728 . . . . . . . . . . . . . . .52
3742 . . . . . . . . . . . . . . .55
3743 . . . . . . . . . . . . . . .55
3744A . . . . . . . . . . . . . .41
3750 . . . . . . . . . . . . . . .35
3751 . . . . . . . . . . . . . . .52
3752 . . . . . . . . . . . . . . .52
3753 . . . . . . . . . . . . . . .52
3754 . . . . . . . . . . . . . . .52
3760 . . . . . . . . . . . . . . .35
3770 . . . . . . . . . . . . . . .35
3777A . . . . . . . . . . . . . .41
3778 . . . . . . . . . . . . . . .23
3780 . . . . . . . . . . . . . . .47
3781 . . . . . . . . . . . . . . .47
3782 . . . . . . . . . . . . . . .43
3784 . . . . . . . . . . . . . . .51
3786-C . . . . . . . . . . . . .45
3787-C . . . . . . . . . . . . .14
3788 . . . . . . . . . . . . . . .17
3789 . . . . . . . . . . . . . . .17
3834 . . . . . . . . . . . . . . .41
3837 . . . . . . . . . . . . . . .84
3839 . . . . . . . . . . . . . . .22
3840 . . . . . . . . . . . .21, 84
3841 . . . . . . . . . . . . . . .26
3842 . . . . . . . . . . . . . . .26
3843 . . . . . . . . . . . . . . .20
3844 . . . . . . . . . . . . . . .29
3846 . . . . . . . . . . . . . . .22
3847 . . . . . . . . . . . . . . .22
3850 . . . . . . . . . . . . . . .57
3862 . . . . . . . . . . . . . . .35
3863 . . . . . . . . . . . . . . .35
3864 . . . . . . . . . . . . . . .45
3901 . . . . . . . . . . . . . . .17
3916A . . . . . . . . . . . . . .90
3925 . . . . . . . . . . . . . . 72
3957 . . . . . . . . . . . . . . .17
3958 . . . . . . . . . . . . . . .54
3966 . . . . . . . . . . . . . .17
4005 . . . . . . . . . . . . . . .35
4011 . . . . . . . . . . . . . . .72
4022 . . . . . . . . . . . . . . .38
4043 . . . . . . . . . . . . . . .85
4044 . . . . . . . . . . . . . . .85
4054 . . . . . . . . . . . . . . .84
4057 . . . . . . . . . . . . . . .52
4098 . . . . . . . . . . . . . . .35
Model#
Page#
4108 . . . . . . . . . . . . . . .21
4115 . . . . . . . . . . . . . . .36
4119 . . . . . . . . . . . . . . .21
4124A . . . . . . . . . . . . . .90
4140A . . . . . . . . . . . . . .90
4159 . . . . . . . . . . . . . . .23
4160 . . . . . . . . . . . . . . .23
4176 . . . . . . . . . . . . . . .72
4225 . . . . . . . . . . . . . . .73
4226 . . . . . . . . . . . . . . .54
4233 . . . . . . . . . . . . . . .73
4236A . . . . . . . . . . . . . .90
4240 . . . . . . . . . . . .21, 25
4243 . . . . . . . . . . . . . . .36
4245 . . . . . . . . . . . . . . .52
4246 . . . . . . . . . . . . . . 53
4247 . . . . . . . . . . . .54, 55
4248 . . . . . . . . . . . . . . 53
4267 . . . . . . . . . . . . . . .85
4274 . . . . . . . . . . . . . . 43
4276-C . . . . . . . . . . . . . 11
4277-C . . . . . . . . . . . . 12
4279 . . . . . . . . . . . . . . .94
4279N . . . . . . . . . . . . . .94
4280 . . . . . . . . . . . . . . .96
4280N . . . . . . . . . . . . . .96
4281 . . . . . . . . . . . . . . .95
4282 . . . . . . . . . . . . . . .24
4283 . . . . . . . . . . . . . . .24
4284 . . . . . . . . . . . . . . .24
4285 . . . . . . . . . . . . . . .24
4286 . . . . . . . . . . . . . . .24
4288 . . . . . . . . . . . . . . .28
4289 . . . . . . . . . . . . . . .28
4290 . . . . . . . . . . . . . . .28
4291 . . . . . . . . . . . . . . .28
4292 . . . . . . . . . . . . . . .28
4293 . . . . . . . . . . . . . . .28
4294 . . . . . . . . . . . . . . .28
4295 . . . . . . . . . . . . . . .28
4296 . . . . . . . . . . . . . . .28
4297 . . . . . . . . . . . . . . .28
4298 . . . . . . . . . . . . . . .28
4299 . . . . . . . . . . . . . . .28
4311 . . . . . . . . . . . . . . .72
4324A . . . . . . . . . . . . . .90
4340A . . . . . . . . . . . . . .90
4384 . . . . . . . . . . . . . . .57
4388 . . . . . . . . . . . . . . .27
4391 . . . . . . . . . . . . . . .21
4408 . . . . . . . . . . . . .9, 42
4408M . . . . . . . . . . . . .86
4416 . . . . . . . . . . . . . . .54
4487 . . . . . . . . . . . . . . .11
4488 . . . . . . . . . . . . . . .22
4507 . . . . . . . . . . . . . . .52
4512 . . . . . . . . . . . . . . .33
4513 . . . . . . . . . . . . . . .37
4521 . . . . . . . . . . . . . . .73
4524-C . . . . . . . . . . . . .12
4528-BB . . . . . . . . . . . .12
Model#
Page#
4528-K . . . . . . . . . . . . .12
4528-X . . . . . . . . . . . . .12
4530-C . . . . . . . . . . . . .16
4531-C . . . . . . . . . . . . .15
4532-C . . . . . . . . . . . . .15
4536 . . . . . . . . . . . . . . .47
4537 . . . . . . . . . . . . . . .47
4538 . . . . . . . . . . . . . . .43
4543 . . . . . . . . . . . . . . .39
4550B . . . . . . . . . . . . . .79
4555 . . . . . . . . . . . . . . .72
4565 . . . . . . . . . . . . . . .73
4578 . . . . . . . . . . . . . . .23
4590 . . . . . . . . . . . . . . .35
4601 . . . . . . . . . . . . . . .33
4613 . . . . . . . . . . . .48, 13
4614 . . . . . . . . . . . . . . .35
4617 . . . . . . . . . . . . . . .37
4619 . . . . . . . . . . . . . . .35
4648-C . . . . . . . . . . . . .15
4650 . . . . . . . . . . . . . . .50
4652 . . . . . . . . . . . . . . .48
4653 . . . . . . . . . . . . . . .36
4654 . . . . . . . . . . . . . . .35
4655 . . . . . . . . . . . . . . .55
4656 . . . . . . . . . . . . . . .55
4658 . . . . . . . . . . . . . . .55
4661 . . . . . . . . . . . . . . .26
4684 . . . . . . . . . . . . . . .21
4690 . . . . . . . . . . . . . . .40
4691 . . . . . . . . . . . . . . .40
4702 . . . . . . . . . . . . . . .51
4719 . . . . . . . . . . . .94, 98
4723 . . . . . . . . . . . . . . .72
4725 . . . . . . . . . . . . . . .13
4726 . . . . . . . . . . . . . . .54
4741 . . . . . . . . . . . . . . .50
4742 . . . . . . . . . . . . . . .52
4768-K . . . . . . . . . . . . .46
4770 . . . . . . . . . . . . . . .36
4771 . . . . . . . . . . . . . . .50
4772 . . . . . . . . . . . . . . .50
4773 . . . . . . . . . . . . . . .39
4777-C . . . . . . . . . . . . .14
4777-K . . . . . . . . . . . . .14
4778 . . . . . . . . . . . . . . .95
4787 . . . . . . . . . . . . . . .25
4788 . . . . . . . . . . . . . . .23
4804 . . . . . . . . . . . . . . .24
4805 . . . . . . . . . . . . . . .24
4812-J . . . . . . . . . . . . .97
4814-BB . . . . . . . . . . . .12
4814-K . . . . . . . . . . . . . . .
4815 . . . . . . . . . . . . . . .17
4826 . . . . . . . . . . . . . . .72
4846-BB . . . . . . . . . . . .12
4846-K . . . . . . . . . . . . .12
4846-X . . . . . . . . . . . . .12
4850 . . . . . . . . . . . . . . .25
4859 . . . . . . . . . . . . . . .24
4862 . . . . . . . . . . . .54, 55
Model#
Page#
4864 . . .52, 53, 55, 56, 57
4892 . . . . . . . . . . . . . . .30
4896 . . . . . . . . . . . . . . .22
4897 . . . . . . . . . . . . . . .32
4898 . . . . . . . . . . . . . . .30
4899 . . . . . . . . . . . . . . .32
4900 . . . . . . . . . . . . . . .34
4903 . . . . . . . . . . . . . . .56
4911A . . . . . . . . . . . . . .49
4914 . . . . . . . . . . . . . . .30
4933 . . . . . . . . . . . . . . .33
4934 . . . . . . . . . . . . . . .33
4935-BB . . . . . . . . . . . .12
4940 . . . . . . . . . . . . . . .29
4945-K . . . . . . . . . . . . .16
4956 . . . . . . . . . . . . . . .26
4957 . . . . . . . . . . . . . . .27
4958 . . . . . . . . . . . . . . .27
4959 . . . . . . . . . . . . . . .25
4963-E . . . . . . . . . . . . .14
4969 . . . . . . . . . . . .10, 17
4970 . . . . . . . . . . . . . . .17
4979 . . . . . . . . . . . . . . .23
4986 . . . . . . . . . . . . . . .33
4987 . . . . . . . . . . . . . . .33
4993 . . . . . . . . . . . .96, 98
4995 . . . . . . . . . . . . . . .36
4996 . . . . . . . . . . . . . . .44
4997 . . . . . . . . . . . . . . .22
5001 . . . . . . . . . . . .96, 98
5008 . . . . . . . . . . . .94, 98
5014 . . . . . . . . . . . . . . .90
5018 . . . . . . . . . . . . . . .35
5019 . . . . . . . . . . . . . . .95
5019N . . . . . . . . . . . . . .95
5026 . . . . . . . . . . . . . . .95
5051 . . . . . . . . . . . . . . .17
5053 . . . . . . . . . . . . . . .44
5056 . . . . . . . . . . . . . . .26
5058-X . . . . . . . . . . . . .13
5066 . . . . . . . . . . . . . . .24
5068 . . . . . . . . . . . . . . .24
5069 . . . . . . . . . . . . . . .17
5076 . . . . . . . . . . . . . . .24
5079 . . . . . . . . . . . . . . .22
5085 . . . . . . . . . . . . . . .22
5088 . . . . . . . . . . . . . . .24
5089 . . . . . . . . . . . . . . .26
5090 . . . . . . . . . . . . . . .29
5108 . . . . . . . . . . . . . . .90
5109A . . . . . . . . . . . . . .83
5110 . . . . . . . . . . . . . . .83
5113A . . . . . . . . . . . . . .85
5116 . . . . . . . . . . . . . . .90
5117A . . . . . . . . . . . . . .85
5120 . . . . . . . . . . . . . . .90
5124 . . . . . . . . . . . . . . .90
5125A . . . . . . . . . . . . . .83
5126A . . . . . . . . . . . . . .83
5133 . . . . . . . . . . . . . . .70
5142-K . . . . . . . . . . . . .70
Model#
Page#
5143-K . . . . . . . . . . . . .70
5144 . . . . . . . . . . . . . . .68
5145 . . . . . . . . . . . . . . .31
5148 . . . . . . . . . . . . . . .23
5155 . . . . . . . . . . . . . . .24
5156 . . . . . . . . . . . . . . .24
5157 . . . . . . . . . . . . . . .24
5165 . . . . . . . . . . . . . . .40
5167 . . . . . . . . . . . . . . .33
5168 . . . . . . . . . . . . . . .33
5169 . . . . . . . . . . . . . . .33
5170 . . . . . . . . . . . . . . .33
5173 . . . . . . . . . . . . . . .39
5178 . . . . . . . . . . . . . . .26
5186 . . . . . . . . . . . . . . .54
5187-C . . . . . . . . . . . . .15
5187-K . . . . . . . . . . . . .15
5188 . . . . . . . . . . . . . . .17
5189 . . . . . . . . . . . . . . .17
5198 . . . . . . . . . . . . . . .56
5203 . . . . . . . . . . . . . . .56
5208 . . . . . . . . . . . . . . .90
5214 . . . . . . . . . . . . . . .90
5216 . . . . . . . . . . . . . . .90
5218 . . . . . . . . . . . . . . .26
5219 . . . . . . . . . . . . . . .27
5220 . . . . . . . . . . . . . . .90
5223 . . . . . . . . . . . . . . .14
5224 . . . . . . . . . . . . . . .90
5230 . . . . . . . . . . . . . . .32
5233 . . . . . . . . . . . . . . .34
5240 . . . . . . . . . . . . . . .90
5250 . . . . . . . . . . . . . . .90
5251 . . . . . . . . . . . . . . .90
5252 . . . . . . . . . . . . . . .90
5253 . . . . . . . . . . . . . . .90
5254 . . . . . . . . . . . . . . .90
5255 . . . . . . . . . . . . . . .55
5259 . . . . . . . . . . . . . . .51
5260 . . . . . . . . . . . . . . .11
5268-C . . . . . . . . . . . . .16
5270 . . . . . . . . . . . . . . .50
5279 . . . . . . . . . . . . . . .89
5280 . . . . . . . . . . . . . . .89
5281 . . . . . . . . . . . . . . .89
5285 . . . . . . . . . . . . . . .22
5286 . . . . . . . . . . . . . . .22
5290 . . . . . . . . . . . . . . .26
5291A . . . . . . . . . . . . . 46
5292 . . . . . . . . . . . . .6, 68
5297 . . . . . . . . . . . . . . .21
5298 . . . . . . . . . . . . . . .29
5299 . . . . . . . . . . . . . . .29
5300 . . . . . . . . . . . . . . .29
5301 . . . . . . . . . . . . . . .48
5302 . . . . . . . . . . . . . . .44
5304-K . . . . . . . . . . . . .15
5305 . . . . . . . . . . . . . . .17
5307 . . . . . . . . . . . . . . .22
5309A . . . . . . . . . . . . . .66
5312 . . . . . . . . . . . . . . .89
Model#
Page#
5314 . . . . . . . . . . . . . . .90
5319 . . . . . . . . . . . . . .84
5325A . . . . . . . . . . . . . .59
5342 . . . . . . . . . . . . . . .13
5343-C . . . . . . . . . . . . .16
5344 . . . . . . . . . . . . . . .22
5360 . . . . . . . . . . . . . . .73
5375 . . . . . . . . . . . . . . .25
5379 . . . . . . . . . . . . . . .25
5401 . . . . . . . . . . . . . . .89
5402 . . . . . . . . . . . . . . .89
5403 . . . . . . . . . . . . . . .50
5405 . . . . . . . . . . . . . . .40
5406 . . . . . . . . . . . . . . .32
5410 . . . . . . . . . . . . . . .17
5412 . . . . . . . . . . . . . . .51
5413 . . . . . . . . . . . . . . .90
5418 . . . . . . . . . . . . . . .74
5419 . . . . . . . . . . . . . . .48
5421 . . . . . . . . . . . . . . .44
5422-C . . . . . . . . . . . . .46
5423-C . . . . . . . . . . . . .14
5428 . . . . . . . . . . . . . . .44
5437 . . . . . . . . . . . . . . .90
5451 . . . . . . . . . . . . . . .89
5452 . . . . . . . . . . . . . . .89
5453 . . . . . . . . . . . . . . .89
5454 . . . . . . . . . . . . . . .89
5510 . . . . . . . . . . . . . . .21
5511 . . . . . . . . . . . . . . .22
5512 . . . . . . . . . . . . . . .21
5513 . . . . . . . . . . . . . . .21
5514 . . . . . . . . . . . . . . .90
5515A . . . . . . . . . . . . . .89
5517A . . . . . . . . . . . . . .66
5519A . . . . . . . . . . . . . .66
5520 . . . . . . . . . . . . . . .73
5521 . . . . . . . . . . . . . . .48
5522 . . . . . . . . . . . . . . .72
5523 . . . . . . . . . . . . . . .47
5524 . . . . . . . . . . . . . . .73
5525 . . . . . . . . . . . . . . .48
5528 . . . . . . . . . . . . . . .91
5529 . . . . . . . . . . . . . . .91
5531 . . . . . . . . . . . . . . .92
5532 . . . . . . . . . . . . . . .92
5534 . . . . . . . . . . . . .6, 92
5543B . . . . . . . . . . . . . .59
5643 . . . . . . . . . . . . . . .89
5643L . . . . . . . . . . . . . .89
5643L-2 . . . . . . . . . . . .89
5645L . . . . . . . . . . . . . .89
5645L-2 . . . . . . . . . . . .89
5672A . . . . . . . . . . . . . .59
5673B . . . . . . . . . . . . . .61
5674C . . . . . . . . . . . . . .59
5676A . . . . . . . . . . . . . .66
5677B . . . . . . . . . . . . . .58
5678-K . . . . . . . . . . . . .70
5682 . . . . . . . . . . . . . . .69
5689A . . . . . . . . . . . . . .67
Model#
Page#
5692 . . . . . . . . . . . . . . .90
5697 . . . . . . . . . . . . . . .11
5698 . . . . . . . . . . . . . . .18
5699 . . . . . . . . . . . . . . .35
5700 . . . . . . . . . . . . . . .35
5701 . . . . . . . . . . . . . . .35
5713 . . . . . . . . . . . . . . .88
5733 . . . . . . . . . . . . . . .89
5748 . . . . . . . . . . . . . . .18
5749 . . . . . . . . . . . . . . .19
5751L . . . . . . . . . . . . . .89
5751L-2 . . . . . . . . . . . .89
5770 . . . . . . . . . . . . . . .89
5770-2 . . . . . . . . . . . . .89
5770L . . . . . . . . . . . . . .89
5773-2 . . . . . . . . . . . . .89
5777 . . . . . . . . . . . . . . .88
5787A . . . . . . . . . . . . . .69
5788 . . . . . . . . . . . . . . .74
5790 . . . . . . . . . . . . . . .78
5795A . . . . . . . . . . . . . .79
5800A . . . . . . . . . . . . . .79
5803A . . . . . . . . . . . . . .79
5806A . . . . . . . . . . . . . .79
5809A . . . . . . . . . . . . . .79
5812A . . . . . . . . . . . . . .79
5815A . . . . . . . . . . . . . .81
5827 . . . . . . . . . . . . . . .79
5830 . . . . . . . . . . . . . . .73
5868L . . . . . . . . . . . . . .89
5868L-2 . . . . . . . . . . . .89
5878 . . . . . . . . . . . . . . .89
5888 . . . . . . . . . . . . . . .89
5888-2 . . . . . . . . . . . . .89
5893 . . . . . . . . . . . . . . .88
5894 . . . . . . . . . . . . . . .88
5898 . . . . . . . . . . . . . . .66
5899A . . . . . . . . . . . . . .62
5900A . . . . . . . . . . . . . .61
5901B . . . . . . . . . . . . . .60
5903A . . . . . . . . . . . . . .61
5904A . . . . . . . . . . . . . .61
5906A . . . . . . . . . . . . . .67
5907A . . . . . . . . . . . . . .67
5908A . . . . . . . . . . . . . .67
5909A . . . . . . . . . . . . . .67
5910B . . . . . . . . . . . . . .68
5911B . . . . . . . . . . . . . .68
5912B . . . . . . . . . . . . . .68
5913 . . . . . . . . . . . .68, 86
5914 . . . . . . . . . . . . . . .68
5916A . . . . . . . . . . .69, 74
5925 . . . . . . . . . . . . . . .73
5927 . . . . . . . . . . . . . . .73
5929 . . . . . . . . . . . . . . .78
5930 . . . . . . . . . . . . . . .78
5931 . . . . . . . . . . . . . . .34
5932 . . . . . . . . . . . . . . .41
5934 . . . . . . . . . . . . . . .41
5935 . . . . . . . . . . . . . . .40
5936 . . . . . . . . . . . . . . .40
www.pomonaelectronics.com
105
Model Number Index
106
Model#
Page#
5940 . . . . . . . . . . . . . . .71
5948 . . . . . . . . . . . . . . .50
5950A . . . . . . . . . . . . . .66
5951A . . . . . . . . . . . . . .66
5952A . . . . . . . . . . . . . .65
5953A . . . . . . . . . . . . . .65
5955 . . . . . . . . . . . . . . .64
5961 . . . . . . . . . . . . . . .89
5961-2 . . . . . . . . . . . . .89
5969 . . . . . . . . . . . . . . .88
5969A . . . . . . . . . . . . . .88
5972 . . . . . . . . . . . . . . .88
5998A . . . . . . . . . . . . . .89
5998AL . . . . . . . . . . . . .89
6006 . . . . . . . . . . . . . . .82
6033 . . . . . . . . . . . . . . .82
6035 . . . . . . . . . . . . . . .82
6041B . . . . . . . . . . .68, 74
6042B . . . . . . . . . . .68, 74
6049A . . . . . . . . . . . . . .79
6069A . . . . . . . . . . . . . .79
6081 . . . . . . . . . . . . . . .92
6082 . . . . . . . . . . . . . . .91
6083 . . . . . . . . . . . . . . .91
6084 . . . . . . . . . . . . . . .91
6085 . . . . . . . . . . . . . . .92
6086 . . . . . . . . . . . . . . .91
6087 . . . . . . . . . . . . . . .91
6088 . . . . . . . . . . . . . . .91
6090 . . . . . . . . . . . . . . .48
6091 . . . . . . . . . . . . . . .48
6101A . . . . . . . . . . . . . .79
6102A . . . . . . . . . . . . . .79
6106 . . . . . . . . . . . . . . .70
6107 . . . . . . . . . . . . . . .90
6108 . . . . . . . . . . . . . . .90
6109 . . . . . . . . . . . . . . .90
6112A . . . . . . . . . . . . . .64
6120 . . . . . . . . . . . . . . .64
6146 . . . . . . . . . . . . . . 64
6147 . . . . . . . . . . . . . . 64
6150 . . . . . . . . . . . . . . 89
6151 . . . . . . . . . . . . . . 89
6152 . . . . . . . . . . . . . . 89
6162 . . . . . . . . . . . . . . .64
6163 . . . . . . . . . . . . . . .64
6166 . . . . . . . . . . . . . . .64
6172A . . . . . . . . . . .63, 64
6173A . . . . . . . . . . .62, 64
6174 . . . . . . . . . . . .63, 64
6175 . . . . . . . . . . . .64, 68
6177 . . . . . . . . . . . . . . .64
6200 . . . . . . . . . . . . . . .64
6201 . . . . . . . . . . . . . . .19
6203 . . . . . . . . . . . . . . .69
6204A . . . . . . . . . . . . . .60
6212 . . . . . . . . . . . . . . .70
6231 . . . . . . . . . . . . . . .44
6232A . . . . . . . . . . . . . .67
6235 . . . . . . . . . . . . .6, 68
6237 . . . . . . . . . . . . . . .64
Model#
Page#
6244 . . . . . . . . . . . . . . .44
6245 . . . . . . . . . . . . . . .44
6246 . . . . . . . . . . . . . . .47
6248 . . . . . . . . . . . . . . .44
6249 . . . . . . . . . . . . . . .43
6252 . . . . . . . . . . . . . . .69
6253 . . . . . . . . . . . . . . .11
6254 . . . . . . . . . . . . . . .19
6262 . . . . . . . . . . . . . . .69
6263 . . . . . . . . . . . . . . .69
6264 . . . . . . . . . . . . . . .69
6265 . . . . . . . . . . . . . . .79
6266 . . . . . . . . . . . . . . .79
6268 . . . . . . . . . . . . . . .54
6275 . . . . . . . . . . . . . . .65
6283-C . . . . . . . . . . . . .44
6286 . . . . . . . . . . . . . . .67
6288 . . . . . . . . . . . . . . .67
6291 . . . . . . . . . . . . . . .10
6303 . . . . . . . . . . . . . . .71
6304 . . . . . . . . . . . . . . .67
6311 . . . . . . . . . . . . . . .78
6312 . . . . . . . . . . . . . . .78
6313 . . . . . . . . . . . . . . .78
6315 . . . . . . . . . . . . . . .96
6316 . . . . . . . . . . . . . . .97
6320 . . . . . . . . . . . . . . .96
6321 . . . . . . . . . . . . . . .95
6323 . . . . . . . . . . . . . . .96
6324 . . . . . . . . . . . . . . .96
6331 . . . . . . . . . . . . . . .96
6336 . . . . . . . . . . . . . . .97
6340 . . . . . . . . . . . . . . .58
6341 . . . . . . . . . . . . . . .65
6342 . . . . . . . . . . . . . . .65
6343 . . . . . . . . . . . . . . .59
6344 . . . . . . . . . . . . . . .59
6345 . . . . . . . . . . . .63, 64
6351 . . . . . . . . . . . . . . .78
6352 . . . . . . . . . . . . . . .78
6353 . . . . . . . . . . . . . . .78
6354 . . . . . . . . . . . .65, 70
6356 . . . . . . . . . . . . . . .49
6357 . . . . . . . . . . . . . . .48
6358 . . . . . . . . . . . . . . .67
6364 . . . . . . . . . . . . . . .70
6365 . . . . . . . . . . . . . . .66
6366 . . . . . . . . . . . . . . .66
6367 . . . . . . . . . . . . . . .99
6371 . . . . . . . . . . . . . . .99
6372 . . . . . . . . . . . . . .100
6373 . . . . . . . . . . . . . . .99
6376 . . . . . . . . . . . . . .100
6378 . . . . . . . . . . . . . .100
6380 . . . . . . . . . . . . . .100
6383 . . . . . . . . . . . .32, 71
6384 . . . . . . . . . . . .32, 71
6387 . . . . . . . . . . . . . . .34
6389 . . . . . . . . . . . . . . .36
6405 . . . . . . . . . . . .68, 86
6411 . . . . . . . . . . . . . . .86
www.pomonaelectronics.com
Model#
Page#
6413 . . . . . . . . . . . .68, 86
6440 . . . . . . . . . . . . . . .36
6441 . . . . . . . . . . . . . . .36
6442 . . . . . . . . . . . . . . .78
6443 . . . . . . . . . . . .73, 79
6456 . . . . . . . . . . . . . . .59
6469 . . . . . . . . . . . . . . .66
6470 . . . . . . . . . . . . . . .66
6472 . . . . . . . . . . . . . . .66
6475 . . . . . . . . . . . . . . .70
6477 . . . . . . . . . . . . . . .66
6479 . . . . . . . . . . . . . . .67
6480 . . . . . . . . . . . . . . .86
6481 . . . . . . . . . . . .41, 86
6483 . . . . . . . . . . . . . . .49
6484 . . . . . . . . . . . . . . .97
6485 . . . . . . . . . . . . . . .97
6486 . . . . . . . . . . . . . . .97
6490 . . . . . . . . . . . . . . .78
6491 . . . . . . . . . . . . . . .80
6492 . . . . . . . . . . . . . . .80
6493 . . . . . . . . . . . . . . .80
6494 . . . . . . . . . . . . . . .80
6495 . . . . . . . . . . . . . . .80
6496 . . . . . . . . . . . . . . .80
6497 . . . . . . . . . . . . . . .80
6498 . . . . . . . . . . . . . . .80
6499 . . . . . . . . . . . . . . .80
6500 . . . . . . . . . . . . . . .80
6501 . . . . . . . . . . . . . . .80
6502 . . . . . . . . . . . . . . .94
6510-V . . . . . . . . . .10, 85
6515 . . . . . . . . . . . . . . .94
6516 . . . . . . . . . . . . . . .94
6517 . . . . . . . . . . . . . . .93
6519 . . . . . . . . . . . .94, 98
6523 . . . . . . . . . . . . . . .95
6524 . . . . . . . . . . . . . . .96
6530A . . . . . . . . . . . . . .60
6534 . . . . . . . . . . . . . . .86
6536 . . . . . . . . . . . . . .100
6540K . . . . . . . . . . . . .100
6542K . . . . . . . . . . . . .100
6544 . . . . . . . . . . . . . . .86
6545 . . . . . . . . . . . . . . .32
6546 . . . . . . . . . . . . . . .32
6547 . . . . . . . . . . . . . . .36
6548 . . . . . . . . . . . . . . .36
6549 . . . . . . . . . . . . . . .36
6551 . . . . . . . . . . . . . . .81
6553 . . . . . . . . . . . .73, 80
6554 . . . . . . . . . . . . . . .81
6559 . . . . . . . . . . . . . .100
6562 . . . . . . . . . . . . . .100
6567 . . . . . . . . . . . . . . .74
6568 . . . . . . . . . . . . . . .93
6570 . . . . . . . . . . . . . . .49
6573A . . . . . . . . . . .69, 74
6576 . . . . . . . . . . . . . . .49
6580 . . . . . . . . . . . .68, 86
6601 . . . . . . . . . . . . . . .65
Model#
6700
6701
6702
6703
6704
6706
6707
6708
6711
6712
6713
6714
6715
6716
6717
6718
6720
6721
6723
6726
6727
6728
6729
6730
6731
6732
6733
6734
6754
6767
6768
6769
6770
6771
6772
6779
6780
6781
6782
6852
6853
6869
6883
6884
6896
6898
6900
6901
6902
7035
7037
7040
7041
7048
7049
7050
7057
7058
7063
7064
7065
Page#
. . . . . . . . . . . . . . .22
. . . . . . . . . . . . . . .22
. . . . . . . . . . . . . . .83
. . . . . . . . . . . . . . .83
. . . . . . . . . . . . . . .83
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . .27, 84
. . . . . . . . . . . . . . .23
. . . . . . . . . . . . . . .23
. . . . . . . . . . . . . . .34
. . . . . . . . . . . .32, 71
. . . . . . . . . . . . . . .65
. . . . . . . . . . . . . . .65
. . . . . . . . . . . . . . .42
. . . . . . . . . . . . . . .31
. . . . . . . . . . . .31, 71
. . . . . . . . . . . . . . .71
. . . . . . . . . . . . . . .82
. . . . . . . . . . . . . . .82
. . . . . . . . . . . . . . .71
. . . . . . . . . . . . . . .71
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . .7, 25
. . . . . . . . . . . . . . .25
. . . . . . . . . . . . . . .26
. . . . . . . . . . . . . . .26
. . . . . . . . . . . . . . .26
. . . . . . . . . . . . . . .26
. . . . . . . . . . . . . . .29
. . . . . . . . . . . . . . .29
. . . . . . . . . . . . . . .29
. . . . . . . . . . . . . . .29
. . . . . . . . . . . . . . .83
. . . . . . . . . . . . . . .83
. . . . . . . . . . . . . . .85
. . . . . . . . . . . . . . .36
. . . . . . . . . . . . . . .36
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .84
. . . . . . . . . . . . . . .85
. . . . . . . . . . . . . . .22
. . . . . . . . . . . . . . .22
. . . . . . . . . . . . . . .22
. . . . . . . . . . . . . . .22
. . . . . . . . . . . . .7, 24
. . . . . . . . . . . . . . .24
. . . . . . . . . . . . . . .24
. . . . . . . . . . . . . . .25
. . . . . . . . . . . . . . .25
. . . . . . . . . . . . .7, 24
. . . . . . . . . . . . . . .24
. . . . . . . . . . . . . . .24
Model#
Page#
7066 . . . . . . . . . . . . . . .24
7073 . . . . . . . . . . . . . . .23
7074 . . . . . . . . . . . . .7, 26
7207 . . . . . . . . . . . . .7, 22
7273 . . . . . . . . . . . . . . .83
7274 . . . . . . . . . . . . . . .83
7275 . . . . . . . . . . . . . . .83
7276 . . . . . . . . . . . . . . .83
7277 . . . . . . . . . . . . . . .27
7278 . . . . . . . . . . . . . . .27
7280 . . . . . . . . . . . . . . .27
7281 . . . . . . . . . . . . . . .27
7282 . . . . . . . . . . . . . . .27
7286 . . . . . . . . . . . . . . .83
7287 . . . . . . . . . . . . . . .83
7288 . . . . . . . . . . . . . . .83
7289 . . . . . . . . . . . . . . .83
7290 . . . . . . . . . . . . .5, 65
72902 . . . . . . . . . . . .3, 76
72903 . . . . . . . . . . . . . .76
72904 . . . . . . . . . . . . . .76
72905 . . . . . . . . . . . .3, 76
72906 . . . . . . . . . . . .3, 76
72907 . . . . . . . . . . . . . .76
72908 . . . . . . . . . . . .4, 16
72909 . . . . . . . . . . . . . .16
72910 . . . . . . . . . . . . . .20
72911 . . . . . . . . . . . . . .20
72912 . . . . . . . . . . . .6, 34
72913 . . . . . . . . . . . . . .34
72914 . . . . . . . . .5, 20, 78
72915 . . . . . . . . . . . . . .78
72916 . . . . . . . . . . . . . .78
72917 . . . . . . . . . . . . . .78
72918 . . . . . . . . . . . . . .33
72919 . . . . . . . . . . . . . .77
72920 . . . . . . . . . . . .5, 77
72921 . . . . . . . . . . . .5, 78
72922 . . . . . . . . . . . .6, 78
72923 . . . . . . . . . . . .5, 77
72924 . . . . . . . . . . .74, 77
72925 . . . . . . . . . . . . . .77
72926 . . . . . . . . . . . .4, 10
72927-C . . . . . . . . . . . .16
72928 . . . . . . . . . . . . . .75
72929 . . . . . . . . . . . . . .77
72930 . . . . . . . . . . . . . .34
72931 . . . . . . . . . . . . . .18
72932 . . . . . . . . . . . . . .19
72933 . . . . . . . . . . . . . .19
72934 . . . . . . . . . . . .4, 18
72935 . . . . . . . . . . . .3, 75
72936 . . . . . . . . . . . . . .77
Many Ways to Find Answers
You can quickly find complete product specifications and discover
Pomona’s newest product announcements when you visit our website:
107
www.pomonaelectronics.com
Now there are three ways for you to find
the product you are looking for.
1. Search by Keywords
Simply click on [Search by Keywords] in
the left-hand column of the homepage.
Then enter the description of the product in
the keywords box and select [Search Now].
2. Search by Category
From the homepage select [View Products]
under either “Test and Measurement”
or “Broadcast/Multimedia”. You will see
a list of product categories from which
to choose.
3. Search by Model #
Enter the model number of the Pomona
product into the [Search by Model] box
and select [Go].
Whichever method you choose you will
be presented with model numbers and
[pdf] hotkeys which will take you directly
to specification information on the
product you want.
Once you have a specific Pomona model
number you are interested in, you can
immediately find a distributor with stock
on hand. From the left-hand navigation
column select [View Distributor Stock],
enter the model number into the box, and
click [Go]. You will be presented with a
list of distributors with that part on hand.
Make the Pomona site your “favorite” place
to “go to” when you need the world’s most
complete line of quality test accessories.
Technical Support
1-800-443-5853
Because technical questions about
products or applications can arise almost
anywhere, Pomona offers immediate
technical support. You can reach a qualified
resource via e-mail or phone either by
visiting the Pomona website, or dialing
toll-free direct. While you are in the
Technical Support section of our website,
you can also refer to selector guides, view
or request a catalog, or go directly to the
specific product information you seek.
Nothing in this catalog is to be construed as an offer. Product availability, prices and delivery dates are subject to Pomona’s order confirmation form. The same
applies to orders based on development samples delivered. Pomona products are intended to be used in accordance with the specifications in this catalog.
Any use or application that deviates from those specifications may be dangerous. A limited warranty applies to Pomona products. Pomona will not be liable
for any loss, damage, cost of repair, or incidental or consequential damages of any kind, arising in connection with the design, manufacture, sale, or
repair of the products, whether based on express or implied contract, negligence or strict liability. Pomona will not be liable to buyer for any amount
exceeding the purchase price of the product which proves to be defective. Pomona will not be responsible or liable for any patent infringements or other
rights of third parties, which may result from the use of this catalog. Registered trademarks used in this catalog are the property of their respective companies.
www.pomonaelectronics.com
In the United States:
In Europe:
All other areas:
Pomona Electronics
9028 Evergreen Way
Everett, WA 98204
United States
Pomona Electronics
P.O.Box 1186
5602 BD Eindhoven
The Netherlands
www.pomonaelectronics.com
www.pomonaelectronics.com
www.pomona.cc
Tel: 1-800-490-2361
Fax: 1-425-446-5844
Tel: +31 (0) 40 2675 150
Fax: +31 (0) 40 2675 151
Lit.#: 2074413 C-ENG-N Rev. C
Pub ID: 11004-eng Rev 01
Volume 51
Products in this catalog are available through:
Copyright © 2005. Pomona is a trademark of Pomona Electronics. All other product and
company names are trademarks or registered trademarks of their respective companies.
Specifications subject to change without notice. All rights reserved. Printed in the U.S.A.
Tel: 1-425-446-5500
Fax: 1-425-446-5844
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement