Sungale PF701 Digital Photo Frame User Manual

Sungale PF701 Digital Photo Frame User Manual
 Ae E
AO
AAC
AE
Digital Photo rrame
еее
еее:
0090000
User's Manual
0090050000
For ongoing product improvement, this manual is subject to modification without prior notice.
a
User Notice
As this product has met
electronic emission
standards in registration
for use at home, it can be
safely used in all areas,
including residential.
FE CE
CONTENTS
PRODUCT INTRODUCTION
COMPONENTS
REMOTE CONTROL
PART NAMES
CONNECTION
PHOTO
SETTINGS
EDITING
FAVORITE
QUESTION & ANSWER
TROUBLESHOOTING
PRODUCT SPECIFICATIONS
WARRANTY
© © © a» © N
15
17
18
19
20
22
в
Productintroduction
Digital Photo Frame is a convenient image album that keeps fun and
Cherishes memories at your fingertips.
With its bright and vivid LCD screen, the Digital Photo Frame eliminates the
need for tedious photo printing and injects a new level of convenience into
your life.
With its diverse storage functions, the Digital Photo Frame allows you
to relive wonderful memories anytime.
(components
For the improvement of product performance and/or quality, the basic
components may be modified without prior notice.
The components may differ slightly in appearance with the provided images.
Basic Components
The components are provided upon product purchase.
( > ( A
Digital Photo Frame Power Adapter
N J N J
а N ( °)
———— y т
а
md —
User Manual Quick-Start Guide
Ne J N J
4 в
$" —
20
ON
© ©
90
Remote control
Remote control
0 000 |
© 906
0
SETUP
Press to set up different modes.
Navigation Buttons
<« : Press to move the cursor left or to the next picture.
D : Press to move the cursor right or to the previous picture.
A : Press to move the cursor to the previous icon or flip horizontally.
VW : Press to move the cursor to the next icon or flip vertically.
Enter
Press to enter or confirm or pause.
Power
Press to turn on or off the player.
Zoom
Press to zoom in or out the picture.
Rotate
Press to rotate the pictures to different angle.
SLIDE SHOW
Press to slide show pictures.
Exit
Press to exit from the present interface.
Note: Remove Insulating Tab to activate battery.
(pat Names
The components may differ slightly in appearance with the provided
images.
Top side
1
5
6
7
8 9
MEANING:
1.Navigation buttons
OK : Press to confirm or enter ,play or pause.
<« : Press to move the cursor left or to the next picture.
Pp : Press to move the cursor right or to the previous picture.
A : Press to move the cursor to the previous icon or flip horizontally.
y : Press to move the cursor to the next icon or flip vertically.
2. EXIT: Press to exit and back to the previous menu.
3. SLIDE SHOW: Press to start a photo slide show and press again to
begin a photo step show.
4. POWER: Press to turn the DPF player on or off.
5.USB: Connect the USB portable flash device.
6.SD/MMC/MS/XD: Insert SD/MMC/MS/XD card.
7.DC IN:Insert the DC power adaptor to the DPF player.
8.Stand: Using the stand provided you can stand the body with horizontal
view and vertical view.
9.Wall Mountable.
(5)
Connection
Power Connection
1. Connect the power adapter to the DC 5V jack at the left side of the product.
2. Plug in the power cable.
Connect to USB Port
USB: Insert various USB portable flash driver as an extra source.
/ Connection
Memory Card insertion
Insert card in the direction indicated by the arrow on the top of the card.(The
side of the memory card on which the sticker is affixed should face to the front)
Aligning the memory card upside down or to the reverse side may cause damage
that is the sole responsibility of the user. (Use SD, Memory Stick, MMC, XD cards
enabled)
ONIN/Asn
aX/SW(]
Note: 1. MS Duo isn't compatible alone. But it can be supported
with the help of MS Duo adapter.
2. ltis recommended that a full format be performed before
using a memory card for the first time.
3. This device will read USB first and will not recognise the
memory card if you insert a memory card and extra USB
memory together at the same time.
To remove a memory card
Remove a memory card from a slot in the opposite direction from which it
was inserted.
Note: The product will display the images stored in the external devices first
and will not display the images in the internal memory if you insert an external
devices.
©
Photo ÓN
Picture slideshow
Tip 1: Press the Menu button to enter the main menu. Select the
Photo icon and press OK to display photo.
Tip 2: In the main menu, if an extra device with photos is inserted to
the unit, select the Photo icon and press OK to begin display the
photos in the extra device.
Single Picture Show
In the slide show mode, if you prefer to display a particular picture,
press “Slide show" button at the back of the frame to enter into single
picture show mode, you will see "slide off" on the right up corner of
the screen. Press again to come to slide show mode, you will see
"slide on" on the right up corner of the screen.
И Photo
When playing, press A or V to flip vertically or horizontally.
When playing, press <q or »> to move to next or previous picture,
press Exit to enter into thumbnail mode if there's no extra device, you
will enter into the Edit mode.
Rotate a photo
1. When displaying images, press the TOTATE on the remote control
to rotate the displaying photo for 90 °once an operation.
2. In Thumbnail Mode, activate the Rotate icon, and press ENTER to
rotate desired picture.
Thumbnail mode Rotate Mode
Page:2/2 Page:2/2
aa] ee Я О Зо ня РЗ О
| aa Emel UN ei [aa EER (ТС wl
| sas | | MED. ==
1 " = na I “a = Bl
fe ER = ‘| te alles -— ;
ia an Р =: és 2e Р =:
CHITTY
For the operations about "delete" and "sort", please refer to page 16.
©
Settings
в
Enter SETUP menu
Tip 1. In the main menu, press the navigation buttons to select the
Setup icon, press ENTER to enter into the Setting Mode.
Tip 2. Press the SETUP button on the remote control to enter into
Setting Mode directly.
mapa 8
Moving to Desired Settings item and Changing Settings
1. Press the A button to select items.
2. Press the > button to enter the setting item list.
3. Press A or Y buttons to select desired setting items.
4. Press OK to change setting.
Setup Menu EPT Display Setup Setup Menu APT Display setup
Brightness »
Contrast »
TFT Brightness №
»
»
Ke
TFT Contrast
в + Е
| а ‘ TFT Saturation = ‘
в
= x
— Hee
or м,
(3) : Select (>): Confirm (4) CY) ©): Select (>): Confirm
/ settings
Setup Menu-Photo Setting
Setup Menu TRAIT Photo Setting
=
E Interval Time »
= Transition Effect >
fra” Show Type »
del | Browse >
alle.
)
E Ue
: Select 0): Confirm
Interval Time
In the setup menu, select Setup Menu-Photo Setting. Then select
the “Interval Time” to set the desired time that make the image
remains on the screen in slide show mode.
Transition Effect
In the setup menu, select Setup Menu-Photo Setting. Then select
the Interval Effect to set the desired transfer effect in slide show
mode.
Show Type
In the setup menu, select Setup Menu- Photo Setting. Then select
the “Show Type” to set the desired photo displaying type.
Select Fit Screen to display images fit to screen in slide show mode;
and select Full Screen to display entire images in slide show mode.
Settings
Browse
In the setup menu, select Setup Menu-Photo Setting. Then select
the “Browse” to set the desired browse mode.
Set the Browse (Thumbnail / File manager ) mode to pre-view photos in
different mode.
Setup Menu
—]
Na Photo Setting
Interval Time
Transition Effect
5
Show Type
fi Tes Browse ;
La
[Fa |
ail
® @) (4): Select (>): Confirm
/ Thumbnail
File Manager
Thumbnail mode Wr
re а
[Loan Ноно
Cu jue
PL i
is
met Ti A
Page:2/2
720x479 2009/08/12
(Thumbnail mode)
Setup Menu- Auto - Play
Photo
Setup Menu
rT Photo Setting
=
Thumbnall
Vv File Manager
Interval Time »
Transition Effect >
Show Type »
Eos] Browse »
La
[ra
oe]
© ©) : Select (>): Confirm
File Number:1/11
E DCIM
@] MISC
@] IUDD
le FLOWER2
Panda202P
Tomatoes202P
Waterlilie-P
le Waterlilies2
ROOT
© © @
ag в ON =
(480X362 2007/31)
(File manager mode)
In the setup menu, select Setup Menu-Auto-Play. Then select the
Photo to set the photo displaying auto or Not.
1. Set the photo auto play to ON: It will auto display the photos in
slide show mode.
2. Set the photo auto play to OFF: For manual play.
(ste Menu- Display Setup
Setup Menu {84,97 Display Setup
—
= Brightness V Normal
»
== Contrast > Bright
fra” TFT Brightness » Soft
>
>
CA TFT Contrast
on TFT Saturation
=) : Select (>): Confirm
Brightness
In the setup menu, select Setup Menu-Display Setup. Then select
the “Brightness” to adjust the displaying brightness.
Select the Normal / Bright / Soft to adjust display.
Contrast
In the setup menu, select Setup Menu-Display Setup. Then select
the “Contrast” to adjust the displaying contrast.
TFT Brightness
In the setup menu, select Setup Menu-Display Setup. Then select
the “TFT Brightness” to adjust the TFT brightness.
TFT Contrast
In the setup menu, select Setup Menu-Display Setup. Then select
the “TFT Contrast” to adjust the TFT contrast.
TFT Saturation
In the setup menu, select Setup Menu-Display Setup. Then select
the "TFT Saturation” to adjust the TFT Saturation.
Settings N
Setup Menu - Custom Setup
OSD Language
In the setup menu, select Setup Menu-Custom Setup. Then select
the “OSD Language” to select different language.
Note: For this product, the only OSD language is English.
Repeat mode
In the setup menu, select Setup Menu-Custom Setup. Then select
the “Repeat mode” to changed the repeat mode:
Select One to repeat One picture only
Select Folder to repeat pictures in a folder
Select All to repeat all of the photos
Select Off to cancel the repeat mode
Default
In the setup menu, select Setup Menu-Custom Setup. Then select
the “Default” to reset the unit to factory default.
Exit
In the setup menu, select Setup Menu-Custom Setup. Then select
the “Exit” to finish the setup menu to go back to the main menu.
editing
Edit: Adding the pictures from external memory to the DPF, or deleting the
pictures storedin the DPF.
Copy
1. Select the Edit icon in the main menu, and press OK to enter the
Edit Dialog.
44141411 18
Edit Dialog
Please select Edit Mode
2. Select the Copy icon, and press OK to enter the file list.
File Number:1/16
| e DSCO1022 10
[© DSC01023 11
© DSC01024 12 Please Wait
& DSC01025 13
[ e psco1026 14
[Li Dsco1027 15
[@ Dsco1028 16
(1200 X 1600 2007/31) ( save) EFD
3. Select the desired images and press OK to confirm. To copy more,
continue select images and confirm.
4. Press the « or p> buttons to move the cursor to the Save icon, and
the icon will become yellow, press OK to begin copy images.
| 5. After saving, you can select the Exit icon to back to the main menu.
Note: The highlight will be down to the file name that is selected. The
DPF only can store 10Q pictures. Otherwise, you can not move the
highlight down to the file name.
©
Editing
Delete
Note: Pictures deleted cannot be recovered. Think over before you
confirm to delete.
~
1. Select the Edit icon in the main menu, and press OK to enter the
Edit Dialog.
2. Select the Delete icon, and press OK to enter the file list.
Edit Dialog
Please select Edit Mode
ООС)
720x479 2009/08/12
continue select images and confirm.
4. If delete all the pictures in the frame, select Delete All item.
3. Select the desired images and press OK to confirm. To delete more,
Sort
Press y button to select Sort icon in Edit Mode, and press ENTER to
move the images. Then select the image you prefer to move, press
«<Q or »- to make the image in order.
Edit Mode 77 pags Delete Mode ("u a
rf — & ay 5 FI
ESE EY. RA "mel E ES SD RN
720x479 2009/08/12
Exit
(>): Delete it
press "Exit" button on remote control to exit directly.
(Favourite
Playing the pictures
You can copy and paste images from extra devices to your digital
photo frame, and they will be stored under the Favourite menu.
Press the Navigation buttons to select the Favourite item and press
OK to display the images.
Sunga e
Photo Setup Edit Favourite
Question & Answer
This chapter will attempt to troubleshoot common problems that one may experience with
the DPF. If this guide does not solve your problem, do not dismantle the machine yourself.
Question
Answer
What photo, formats are supported by
the Digital Photo Frame?
Photo: JPEG
What memory cards are compatible
with the digital frame?
Secure Digital Card (SD)/MultiMedia Card (MMC)
Memory Stick card(MS) /XD
Dose the Digital Photo Frame
have built-in memory?
Yes. The player has an internal memory to store media file. You can store
10 pictures at most.
Can | insert multiple memory cards?
Yes,you can insert one of the MMC,MS,SD,XD card each time.
What is the best picture resolution
displayed on the screen?
The player's best resolution is 800X480
Can | adjust the colors of the picture?
No. All color settings are preset at the factory. You can only adjust the
brightness and contrast of the screen.
Why Digital picture Frame does not
advance to next picture?
1. There is only one picture in the frame.
2. You are viewing high -resolution pictures on the card, High-resolution pictures
can take longer time to display.
3. You are in STEP SHOW display mode.
4. The next picture is damaged.
Why is only 24 pictures displayed
in the thumbnail browsing mode?
Use navigation buttons to choose the image on the right-lower corner, then press
« to see next 24 pictures thumbnail.
Why picture display seems slow?
You are viewing high-resolution pictures, high- resolution pictures
can take some time to display.
Why Digital Picture Frame doesn’t
display any pictures?
Make sure the pictures are in JPEG format.
Make sure you have inserted a card or USB device properly and selected the
PHOTO icon in the main menu. Or make sure there are pictures in the internal
memory and you have selected the Favorite icon in the main menu.
Why picture doesn’t cover the
entire screen ?
This is not a quality problem.
The picture that is 16:9 and the resolution higher than 800X480 can
cover the entire screen, so please adjust the picture ratio to 16:9, and
the resolution to 800X480 or higher.
How can | see the file list?
Please enter into the Photo Setting Menu and set the Browse item to File Manger.
(troubleshooting
If you have any questions, please consult the troubleshooting guide below.
Some simple checks or a minor adjustment on your part may eliminate the
problem and quicky resolved.
No power Ensure the power button is on
Ensure the power cord is not damaged
Ensure the power plug is connected
firmly to the outlet
1. Please copy the content in your card to
your PC, then format your card, then past
your photos in your card again, then insert
the card to DPF to read it.
2. Ensure the card is not damaged
3. Ensure the card is connected to the
DPF correctly
4. Ensure the card has photos, if no photos
in card, the screen will display “no playable
file”
5. Do not insert your card and USB together
at same time. Otherwise one of device can
not be recognızed.
Could not read the USB 1. This unit is 2.0version USB port, make
portable flash driver sure your usb device portis 2.0 version
2. Do not insert your card and USB together
at same time. Otherwise one of device can
not be recognized
Could not read the card
Product Specifications
Specifications can be changed without prior notice in the interest of improving product
performance.
Product Specifications
Item
LCD Display Size
Matching Image Resolution
Memory Internal Memory
Compatible Memory Cards
Support Media Formats Images
Power Adapter
USB Connection USB
Note: All data are provided for reference purposes only. Sungale reserves the right
to make all changes without prior notice.
Details
7 Inch (Diagonal) (16:9)
800(Horizontal)* 480(Vertical)
10 photos can be stored
SD/MMC/MS/XD
JPEG(jpg)
Input: 100~240V AC, Output: 5V DC
USB 2.0
4 and Safety Information
* FCC Part 15.19
This device complies with Part 15 of the FCC Rules .Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received ,including interference
that may cause undesired operation.
* FCC part 15.21
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate
the equipment.
* FCC part 15.105
Note : This equipment has been tested and found to comply with the limits for a
Class B digital device ,pursuant to Part 15 of the FCC Rules, These limits are
designed to provide reasonable protection against harmful interference ina
residential installation . This equipment generates, uses, and can radiate radio
frequency energy and ¡if not installed and used in accordance with the
instructions, may cause harmful interference which will not occur in a particular
installation .Ifthis equipment does cause harmful interference to radio or
television reception ,which can be determined by turning the equipment off and
on ,the user is encouraged to correct the interference by one or more of the
following measures:
® Reorientorrelocate the receiving antenna.
e Increase the separation between the equipment and receiver.
e Connect the equipmentinto an outlet on circuit different from that to which
the receiver is connected.
e Consultthe dealer or an experienced radio TV technician for help.
e)
LIMITED WARRANTY
The limited warranty set forth below is given by the manufacturer with respect to Sungale brand DPF
players and other consumer electronics products purchased and used in the United States of America.
The manufacturer warrants this product against defects in material or workmanship as follows:
LABOR: For a period of ninety (90) days from the date of purchase if this Product is defective, the
manufacturer will repairor replace the Product, at its option, at no charge . After this ninety (90) days
period up to one year, a labor charge of US$30.00 will be charged for each service.
PARTS: For a period of one year fromthe date of purchase, the manufacturer will supply, at no
charge, new or rebuilt replacement parts in exchange for defective parts. After this one year period, the
manufacturer will charge the new or replacement parts.
This warranty does not cover: (1) customer instruction, installation or set up; (2) cosmetic damage or damage
due to accident, misuse, abuse, or negligence; (3) commercial use of the Product; (4) modification of any part
of the Product; (5) damage due to improper operation, improper maintenance, or connection to an improper
voltage supply; (6) damage due to an attempted repair of the Product by anyone other than a facility
authorized by the manufacturer to service the Product; (7) consumables (such as fuses and batteries).
This warranty is valid only in the United States.
The product must be accompanied by a copy of the original retail purchase receipt. If no proof of purchase is
attached, the warranty will not be honored and repair cost will be charged.
This warranty is valid with attach written documentation detailing the complaint to the outside or inside of the
carton.
This warranty is invalid if the factory applied serial number has been altered or removed from the Product.
The manufacturer reserves the right to modify any design of this product without prior notice.
To obtain warranty service, you must deliver the product freight prepaid, in either its original packaging or
packaging affording an equal degree of protection, plus proof of purchase, to:
Service Center
13941 Central Ave,
Chino, CA 91710
Tel: 800-473-5156
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. THE SERVICE CENTER SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Digital Photo Frame
sunga e
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement