Sungale PF801 Digital Photo Frame User Manual

Sungale PF801 Digital Photo Frame User Manual
MODEL:PF801
Quick Start Guide
Navigation Controls
The components may differ slightly in appearance with the provided
images.
. da Press to move cursor right.
. mM» :Press to move cursor left.
. ENTER: Press to enter or confirm.
. EXIT: Press to exit.
. Power: Press to turn the unit off or on.
USB: Insert a USB flash disk.
SD/MMC/MS: Insert one of the SD/MMC/MS cards each time.
DC IN: Insert the AC adapter to connect the unit with power outlet.
POWER: Press to turn the unit on or off.
SOURCE: Press to exit to the main menu directly.
SETUP: Press to set up picture display effect and mode, etc.
MODE: Press to change picture slideshow mode to Optimal or
Original.
ROTATE: Press to rotate the picture which is playing.
v9/52/57/5 : Press to move cursor up, down, left or right
ENTER: Press to enter or confirm.
ZOOM: Zoomthe picture which is playing.
PLAY/PAUSE: When playing a picture in full screen, press this
button to pause or continue slideshow.
O) : Press to play the last picture.
O : Press to play the next picture.
O : When playing pictures in full screen, press this button to exit to
thumbnail pictures list. (Except the condition that your DPF
automatically slideshow pictures in the internal memory while no
memory card was inserted. At this time, no matter which buttons
except POWER and SETUP buttons on remote control that you
pressed, DPF will go to main menu.)
Getting Started
Connecting your DPF machine with power by using the power adapter
provided. The DPF machine will start up and go to main menu.
After about 10 seconds without any operation, the DPF machine will
auto slideshow pictures in the internal memory.
Press @ tothe main menu.
Loading photos from memory card or USB
Insert one of the SD/MMC/MS card to your digital photo frame according
to follow direction showed by silk-printing.
You can also insert a USB flash disk which has pictures to the USB slot
to play pictures stored in the USB.
The digital photo frame will auto slideshow pictures in your card or USB
which has been inserted.
Press Q or IM to exit to the main menu.
Setup
1.Press ES to move cursor to “Setup” and press “ENTER” to enter the
setup interface.
2.Press “SETUP” button on remote control to setup interface directly.
There will be 5 icons listed at the left side. From top to bottom, they are
Photo setting, auto play, display setup, Custom setup and exit
respectively.
Photo Setting
You may press [7] button to select one of the icons, and press [=] to
enter the detailed setup options (press Æ to return), then press 7
or EX to choose what you want and press “ENTER” button to confirm
the settings.
What you can setup
You can setup slideshow interval time, transition effect, show type in
fit screen or full screen, browse in thumbnail mode or file manager
mode, photo auto play or not, brightness and contrast, TFT Saturation,
OSD language, play repeat mode andrestore all of the settings to
original state by selecting “Default”.
SOURCE
Press ggg button to goto the main menu interface.
Calendar and Clock
Press [=] to move cursor to “Calendar” and press “ENTER” to confirm.
Then you will enter the interface with 3 options: Display, Set Date and
Exit.
Press “ENTER” to display calendar directly.
Press’! to select “Set Date” and press “ENTER” to enter.
Press EN ES to move cursor and press 7% T7 to change the numbers.
Press “ENTER” to confirm after setting.
You may follow the same steps to setup clock.
Press ggg button to go to the main menu interface.
Edit
Press I to select “Edit” and press “ENTER” to the interface with 3
options: Copy, Delete and Exit.
You will enter into the interface with 3 options: Copy, Delete and Exit.
Delete pictures in your internal memory
If you haven'tinserted a memory card, when you select “Copy” icon and
press ENTER, it will not work and auto go to main menu. At this situation
you can only delete pictures from internal memory. Even if you have
inserted a memory card and then select “Delete”, you can only delete
pictures in internal memory and you can’t delete pictures in the memory
card.
@
Copy pictures from memory card to internal memory
If you have inserted a memory card, you can select the copy icon and
press ENTER to enter the memory card file list. Press Ez to select the
pictures that you want to copy and then press ENTER to confirm your
selection, there will be a square around the selected pictures. After
selecting the pictures that you want to copy from memory card to internal
memory, press [= button to select “Exit” and then E button to select
“Save”, and press ENTER button to confirm. Then the pictures will be
pasted to the internal memory.
Note: The DPF internal memory can only store around 10 pictures at
most. If you have 10 pictures stored in the DPF internal memory, then
you can't copy any more pictures from memory card to DPF unless you
delete some pictures in the internal memory.
SOURCE
Press pgm button to goto the main menu interface.
Favorite
Press E to select “Favorite” and press ENTER to slideshow pictures
in internal memory only.
Support
If you encounter an issue, resolve the issue in the following order.
1. Refer to the User's Manual.
e You can download the User's Manual from the support web site:
www.sungale.com to your computer.
2. Visit the support site.
* For manual download and FAQs: www.sungale.com
3. Contact Sungale Support.
e Toll Free Call in the USA: 800-473-5156
e Service email: [email protected]
©
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement