SUPER Server 5013C-M8 server User's Manual

Below you will find brief information for server SuperServer 5013C-M8. The Supermicro SuperServer 5013C-M8 is a high-end single processor, 1U rackmount server with state-of-the-art features. The 5013C-M8 is comprised of two main subsystems: the SC813MS-300C 1U rackmount chassis and the P4SC8 motherboard. This manual is written for professional system integrators and PC technicians.

PDF Download
Document
SuperServer 5013C-M8 User's Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • single processor server
  • based on the SC813MS-300C 1U rackmount server chassis
  • Supports a single Intel ® Pentium ® 4 processor of up to 3.40 GHz
  • Supports a single Intel ® Celeron ® processor of up to 2.80 GHz
  • Supports up to 4 GB of ECC unbuffered DDR400/333/266 SDRAM modules
  • Supports four 80-pin SCA Ultra320 SCSI hard drives
  • has two 32-bit, 33 MHz (5V) PCI slots and two 64-bit, 66 MHz (3.3V) PCI-X slots
  • has an onboard controller that supports two Gigabit LAN ports
  • supports up to four Ultra ATA 100 hard drives or ATAPI devices
  • chassis and CPU overheat sensors

Frequently asked questions

The SuperServer 5013C-M8 supports either a single Intel ® Pentium ® 4 processor of up to 3.40 GHz or a single Intel ® Celeron ® processor of up to 2.80 GHz.

The SuperServer 5013C-M8 supports up to 4 GB of ECC unbuffered DDR400/333/266 SDRAM modules.

The SuperServer 5013C-M8 supports four 80-pin SCA Ultra320 SCSI hard drives and also supports ATA/100 IDE drives.

The air seals in the SuperServer 5013C-M8 are located under the chassis fans and beneath the frame cross section that separates the drive bay area from the motherboard area of the chassis. They help to ensure proper airflow through the system.

The SuperServer 5013C-M8 is comprised of two main subsystems: the SC813MS-300C 1U rackmount chassis and the P4SC8 motherboard.
ALP:
Preparing document for printing…
0%