Sxx65x & Sxx70x Series Teccor brand Thyristors 65 / 70 Amp Standard SCRs

Sxx65x & Sxx70x Series Teccor brand Thyristors 65 / 70 Amp Standard SCRs
Teccor® brand Thyristors
65 / 70 Amp Standard SCRs
Sxx65x & Sxx70x Series
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
t3P)4DPNQMJBOU
t(MBTToQBTTJWBUFE
junctions
Typical applications are AC solid-state switches, industrial
power tools, exercise equipment, white goods and
commercial appliances.
Agency File Number
J & K Packages: E71639
®
t4VSHFDBQBCJMJUZVQUP
950 A
Applications
Agency Approval
Agency
t7PMUBHFDBQBCJMJUZVQ
to 1000 V
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Main Features
Schematic Symbol
Symbol
IT(RMS)
VDRM /VRRM
IGT
Value
Unit
65 & 70
A
400 to 1000
V
50
mA
A
K
G
Absolute Maximum Ratings
Symbol
IT(RMS)
IT(AV)
ITSM
I2t
di/dt
IGM
PG(AV)
Tstg
TJ
Sxx65x & Sxx70x Series
Parameter
RMS on-state current
Average on-state current
Test Conditions
Value
Unit
Sxx65J
Sxx65K
TC = 75°C
65
Sxx70W
TC = 80°C
70
Sxx65J
Sxx65K
TC = 75°C
41.0
A
Sxx70W
TC = 80°C
45.0
A
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
800
single half cycle; f = 60Hz;
TJ (initial) = 25°C
950
I2t Value for fusing
tp = 8.3 ms
3745
A2s
Critical rate of rise of on-state current
f = 60Hz ; TJ = 125°C
200
A/μs
Peak gate current
TJ = 125°C
PW = μS
5.0
A
Average gate power dissipation
TJ = 125°C
Peak non-repetitive surge current
A
1.0
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
331
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/23/13
Teccor® brand Thyristors
65 / 70 Amp Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
Test Conditions
IGT
Value
VD = 12V; RL = 30 VGT
MAX.
50
MIN.
5
MAX.
VD = VDRM; gate open; TJ = 100°C
dv/dt
650
600V
600
800V
500
1000V
VD = VDRM; gate open; TJ = 125°C
2.0
400V
MIN.
250
400V
550
600V
500
800V
475
Unit
mA
V
V/μs
VD = VDRM; RL = 3.3 k; TJ = 125°C
MIN.
0.2
V
IT = 400mA (initial)
MAX.
80
mA
tq
(1)
MAX.
35
μs
tgt
IG = 2 x IGT; PW = 15μs; IT = 140A
TYP.
2.5
μs
VGD
IH
Note :
(1) IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs
Static Characteristics
Symbol
Test Conditions
65A Device IT = 130A; tp = 380μs
VTM
Unit
1.8
V
MAX.
70A Device IT = 140A; tp = 380μs
VDRM / VRRM
TJ = 100°C
TJ = 125°C
20
o7
TJ = 25°C
IDRM / IRRM
Value
1000 V
30
o7
1500
800V
2000
MAX.
1000V
5000
7o7
3000
800V
5000
μA
Thermal Resistances
Symbol
R(J-C)
Parameter
Value
Junction to case (AC)
Sxx65J
Sxx65K
0.86
Sxx70W
0.6
Unit
°C/W
Note: xx = voltage
Sxx65x & Sxx70x Series
332
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/23/13
Teccor® brand Thyristors
65 / 70 Amp Standard SCRs
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature
Figure 2: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
2.0
Ratio of VGT /VGT (TJ=25°C)
Ratio of IGT /IGT (TJ = 25°C)
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
1.5
1.0
0.5
0.0
125
-40
-15
10
Junction Temperature (TJ) -- (°C)
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
85
110
125
200
Instantaneous On-state Current (iT) – Amps
Ratio of IH /IH (TJ =25°C)
60
Figure 4: On-State Current vs. On-State
Voltage (Typical)
2.0
1.5
1.0
0.5
TJ = 25°C
180
160
140
120
100
80
60
40
20
0
0.0
-40
-15
10
35
60
85
110
0.7
125
0.8
Junction Temperature (TJ) -- (°C)
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Instantaneous On-state Voltage (vT) – Volts
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable Case Temperature
vs. RMS On-State Current
60
130
Maximum Allowable Case Temperature
(TC)-°C
Average On-State Power Dissipation
[PD (AV)] - (W atts)
35
Junction Temperature (TJ) -- (°C)
50
40
30
20
10
0
0
10
20
30
40
50
60
The "K" package rating with its narrow leads is intended
for high surge condition use only and not recommended for >50A rms continuous current use since lead
temperature depending on lead length can exceed PCB
solder melting temperature. "J" or "W" packages are
recommended for >50A rms continuous current requirements.
125
120
115
110
105
Sxx70W
100
95
Sxx65K
Sxx65J
90
85
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
80
75
70
70
0
10
20
30
40
50
60
70
80
RMS On-State Current [IT(RMS)] - Amps
RMS On-State Current [IT(R MS)] - (Am ps)
Note: xx = voltage
Sxx65x & Sxx70x Series
333
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/23/13
Teccor® brand Thyristors
65 / 70 Amp Standard SCRs
Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current
130
The "K" package rating with its narrow leads is
intended for high surge condition use only and not
recommended for >32A (AV) continuous current use
since lead temperature depending on lead length can
exceed PCB solder melting temperature. "J" or "W"
packages are recommended for >32A (AV) continuous current requirements.
Maximum Allowable Case Temperature
(TC) - °C
125
120
115
110
105
Sxx70W
100
95
Sxx65K
Sxx65J
90
85
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
75
70
0
5
10
15
20
25
30
35
40
45
50
Average On-State Current [IT(AVE)] - Amps
Figure 8: Peak Capacitor Discharge Current
Figure 9: Peak Capacitor Discharge Current Derating
1.2
1.0
Normalized Peak Current
Peak Discharge Current (ITM) - Amps
10000
1000
ITRM
0.8
0.6
0.4
0.2
tW
0.0
100
0.5
10.0
1.0
0
50.0
Pulse Current Duration (tw) - ms
25
50
75
100
125
150
Case Temperature (TC) - °C
Figure 10: Surge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Sxx70W
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
Sxx65K
Sxx65J
100
10
1
10
100
1000
Surge Current Duration -- Full Cycles
Note: xx = Voltage
Sxx65x & Sxx70x Series
334
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/23/13
Teccor® brand Thyristors
65 / 70 Amp Standard SCRs
Soldering Parameters
Reflow Condition
1Co'SFFBTTFNCMZ
Pre Heat
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
oTFDPOET
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
Temperature
- Temperature Min (Ts(min))
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
time to peak temperature
Lead Material
Test
100% Matte Tin-plated
UL recognized epoxy meeting flammability
classification 94V-0
Temperature Cycling
Copper Alloy
Temperature/
Humidity
Design Considerations
High Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Low-Temp Storage
Sxx65x & Sxx70x Series
Time
Environmental Specifications
AC Blocking
Body
Ramp-do
Ramp-down
tS
Physical Specifications
Terminal Finish
tP
TP
Thermal Shock
Autoclave
335
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C;
15-min dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C;
85% rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime
at each temperature; 10 sec (max) transfer
time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/23/13
Teccor® brand Thyristors
65 / 70 Amp Standard SCRs
Dimensions – TO-218X (W Package) — Non-Isolated Mounting Tab
C
ANODE
Dimension
D
B
U (diameter)
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
Tc
Measurement
Point
A
F
E Z
CATHODE
X
W
J
GATE
N
R
S
P
T
M
Y
K
G
ANODE
H
L
V
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Inches
Millimeters
Min
Max
Min
Max
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.256
0.220
0.080
0.169
0.034
0.113
0.086
0.156
0.164
0.603
0.000
0.003
0.028
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.264
0.228
0.088
0.177
0.042
0.121
0.096
0.166
0.165
0.618
0.005
0.012
0.032
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
6.50
5.58
2.03
4.29
0.86
2.87
2.18
3.96
4.10
15.31
0.00
0.07
0.71
2.17
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
6.71
5.79
2.24
4.49
1.07
3.07
2.44
4.22
4.20
15.70
0.13
0.30
0.81
2.42
Dimensions – TO-218AC (K Package) — Isolated Mounting Tab
Tc Measurement Point
U (diameter)
B
Dimension
C
D
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
U
W
A
F
E
W
GATE
P
J
CATHODE
M
ANODE
Q
R
N
K
L
Sxx65x & Sxx70x Series
H
G
Note: Maximum torque
to be applied to mounting
tab is 8 in-lbs. (0.904 Nm).
336
Inches
Millimeters
Min
Max
Min
Max
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.211
0.422
0.058
0.045
0.095
0.008
0.008
0.164
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.219
0.437
0.068
0.055
0.115
0.016
0.016
0.165
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
5.36
10.72
1.47
1.14
2.41
0.20
0.20
4.10
2.17
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
5.56
11.10
1.73
1.40
2.92
0.41
0.41
4.20
2.42
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/23/13
Teccor® brand Thyristors
65 / 70 Amp Standard SCRs
Dimensions – TO-218X (J Package) — Isolated Mounting Tab Common with Center Lead
Inches
C
Dimension
D
B
U (diameter)
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
Tc
Measurement
Point
A
F
E Z
CATHODE
X
W
GATE
N
J
R
S
P
T
M
Y
K
G
ANODE
H
L
V
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Millimeters
Min
Max
Min
Max
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.256
0.220
0.080
0.169
0.034
0.113
0.086
0.156
0.164
0.603
0.000
0.003
0.028
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.264
0.228
0.088
0.177
0.042
0.121
0.096
0.166
0.165
0.618
0.005
0.012
0.032
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
6.50
5.58
2.03
4.29
0.86
2.87
2.18
3.96
4.10
15.31
0.00
0.07
0.71
2.17
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
6.71
5.79
2.24
4.49
1.07
3.07
2.44
4.22
4.20
15.70
0.13
0.30
0.81
2.42
Product Selector
Part Number
Voltage
Gate Sensitivity
Type
Package
50mA
Standard SCR
TO-218AC
X
50mA
Standard SCR
TO-218X
X
50mA
Standard SCR
TO-218X
400V
600V
800V
1000V
Sxx65K
X
X
X
X
Sxx65J
X
X
Sxx70W
X
X
Note: xx = Voltage
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Sxx65KTP
Sxx65K
4.40g
Tube
250 (25 per tube)
Sxx65JTP
Sxx65J
5.23g
Tube
250 (25 per tube)
Sxx70WTP
Sxx70W
5.23g
Tube
250 (25 per tube)
Note: xx = Voltage
Sxx65x & Sxx70x Series
337
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/23/13
Teccor® brand Thyristors
65 / 70 Amp Standard SCRs
Part Numbering System
S 60 65 K
DEVICE TYPE
S: SCR
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
65: 65A
70: 70A
Sxx65x & Sxx70x Series
Part Marking System
81
TO-218AC - (K Package)
TO-218X - (J Package)
TO-218X - (W Package)
Lead Form Dimensions
xx: Lead Form Option
S6065K
SENSITIVITY & TYPE
[blank]: 50mA
®
PACKAGE TYPE
K: TO-218AC (Isolated)
J: TO-218X (Isolated)
W: TO-218X (Non-isolated)
YMLXX
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
XX: Lot Serial Code
338
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/23/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement