Sylvania SDVD9004 Portable DVD Player User Manual

Sylvania SDVD9004 Portable DVD Player User Manual

SDVD9004

Table Of Contents

Safety Precaution 1

Package 3

Main Features 3

Main Unit Controls 4

System Connection 5

The Remote Control 8

Basic operation 10

System Setup 15

Specification 18

Troubleshooting 19

Safety Precaution

Thank you for choosing our portable DVD player. The unit applies the latest state of art electronics and is designed for use at home, in hotels and in offices etc for relaxation.

The compact size makes carrying easier as well as installation. Please read the manual carefully prior to use and keep it well for later consultation.

Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

1) Please read the instruction manual carefully and follow all the requirements of safe

operation to operate the device.

2) Do not use this unit near water. Do not place over the unit any container with liquid

inside.

3) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

4) Unplug this unit during lightning storms or when unused for long time.

5) About Cleaning: Unplug the system, use only wet cloth to clean. Do not use liquid

detergent or aerosol.

6) Only use accessories specified by the manufacturer.

7) Refer all servicing to qualified service personnel, servicing is required when the unit

has been damaged in any way, such as power supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the unit, exposed to moisture, does not

operate normally. Don't try to repair the machine by yourself because of the danger of

high voltage and electric shock.

8) Do not use irregular shaped discs such as heart or star-shaped discs as they may

cause the unit to malfunction.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

1

2

Package

Main Features

High brightness color 9” LCD screen

Compatible with disc of DVD, VCD, MP3, MP4, CD, JPEG, etc.

Built-in stereo speaker

Built-in rechargeable Lithium polymer battery

Support PAL or NTSC system

Support Multi-language OSD, speed forward/backward, repeat function

Zoom in/out function

3

Main Unit Controls

1

16 15 14 13 12 11

AV OUT OFF/ON DC IN 9-12V

18

17

MUTE

SETUP

MENU

MODE

2

3

4

5

6

7

8

9

10

1. USB port

2. MUTE button

3. MENU button

4. SETUP button

5. MODE button

6. STOP Button

7. PLAY/PAUSE button

8. Button

9. OK button

4

10. Button

11. DC IN 9-12V

12. Power ON/OFF switch

13. AV OUT

14.Earphone jack

15. Volume knob

16. SD card slot

17. Open knob

18.

System Connection

Powering and installation

Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the machine, then plug the other end into the AC power receptacle. Please refer to the following illustration

AV OUT OFF/ON DC IN 9-12V

If using car cigarette lighter adaptor to connect to the power:

Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug the other end into the car cigarette lighter socket. See illustration below.

AV OUT OFF/ON DC IN 9-12V

Notice:

1.Car cigarette lighter adaptor can't be used to recharge the battery.

2.Car cigarette lighter adaptor is available to use only when the carpower supply 12V with

negative grounding .

Connecting to TV

You can also connect the unit to a TV to enjoy high quality picture and stereo sound.

Please refer to the following illustration:

AV OUT OFF/ON DC IN 9-12V

AV CABLE

Not supplied

AUDIO IN VIDEO IN

TV

Please use AV cable to connect the machine and the TV. Make sure it is connected correctly.

AV OUT OFF/ON DC IN 9-12V

5 6

Connecting with external Speaker

The unit can be connected with external speaker. Please see the following illustration

VIDEO IN

TV

AV OUT OFF/ON DC IN 9-12V

AV CABLE

Not supplied

AUDIO IN

AMPLIFIER

Left front speaker

Center speaker

Right front speaker

SUBWOOFER

Left rear speaker Right rear speaker

Notice:There is no 5.1 channel in the unit, however, after connecting to APM it is available to

output audio in 5.1 channel

7

The Remote Control

1

7

8

9

4

5

6

2

3

10

11

12

13

14

15

16

20

17

18

19

1. Number button

2. TITLE ( To display title information)

11. ZOOM(To zoom in/out the image during

the playback)

3. AUDIO (To select audio language)

12. Menu (To enter or exit menu root)

4. SETUP (To go to or exit setup menu)

13. Subtitle (To select subtitle language

when playing DVD disc)

5. Previous/Next button (To go to

previous/next chapter or scene during

playing)

14. Angle (To change viewing angle when

playing disc with multi-angle)

6. Fast forward/backward button (To

scan forward/backward at 2, 4, 8, 16,

or 32 times )

15. A-B (Repeat a specific portion from

point A to B, press it again to cancel

repeat playing)

7.OSD ( To display disc information

during playing such as elapsed and

remaining time)

16. Repeat (To repeat playing title,

chapter or track)

8. Play/pause

17. Return (To return to the main menu)

9. Stop ( press once to stop playback, then

press to resume playback from the

point where you stopped; press stop button twice to stop playback completely)

18. MUTE(To turn to mute)

19. VOL +/- (To adjust the volume)

20: Enter ( To confirm)

10. MODE (To select the source)

8

The Use of Remote Control

Please put the battery into the remote control as per below illustration

1

2

CR2025

When using remote control, make sure the infrared window is pointed to infrared receiving window of the machine. The distance between machine and remote control must be within 3 metres. Please refer to the following illustration

CR2025

30

0

30

0

Notice

1.To avoid falling off or place near damp environment.

2.To avoid infrared receiving window of the unit being under direct sunlight

3.Please use a new battery to replace old one if the remote control doesn't work.

9

Basic Operation

DVD

MPEG4

SVCD

VCD CD MP3 Xvid

Playing disc of DVD, MPEG4, SVCD, VCD, CD, MP3, Xvid

1. After connecting power to the unit, turn on the unit by sliding the ON/OFF

switch to ON, the source menu will be displayed on the screen:

DVD

MEDIA

Press to enter DVD mode or Media mode and press OK button to confirm.

When selecting “Media”, ensure to insert USB or SD/MMC card properly

2. Open the disc door and insert a disc into the door with the label side facing

up.

3. Close the disc door. The unit will load the disc and start playing.

4. Press to once to stop playback; then press to resume playback from

the point where you stoped; press twice to stop playback completely).

5. During playback, press to pause; press it again to resume playback.

6. When the playing is finished, please turn off the power by sliding ON/OFF

switch to OFF.

7. For some DVD disc with Title or Chapter menu, press “ MENU” button to

enter menu page, and use to select. Press ENTER to confirm.

Note: Please do not disconnect USB devices or plug out SD/MMC cards

while they are working with the unit. Functional failure may occur in

case of wrong operations.

Menu play/pause

Title

Cursor button

ENTER

10

Fast forward and fast backward

DVD

MPEG4 SVCD

VCD CD

When playing disc of DVD, MPEG4,SVCD, VCD, CD, the unit can search forward or backward.

1. Press , the unit will search forward. Press it repeatedly ,the unit will play at 2, 4, 8, 16,

32 times of speed.

2X 4X

32X 16X 8X

2. Press , the unit will search backward. Press it repeatedly ,

the unit will play at 2, 4, 8, 16, 32 times of speed.

2X 4X

Search forward

Search backward

32X

Repeat playing

DVD

MPEG4 SVCD

VCD CD

16X 8X

When playing disc of DVD, MPEG4, SVCD, VCD, CD, user can repeat playing one

chapter, title or all the whole disc.

For DVD disc, press “repeat” button, user can repeat playing one Chapter; press it again to repeat playing Title; press it the third time to repeat playing the whole disc.

Chapter Title All

Repeat off

For MP3 disc, press “repeat” to repeat playing present file; press it again to repeat playing the folder; press it the third time to cancel repeat playing.

Repeat one Repeat folder

Repeat off

Repeat playing of favorite scene

DVD

MPEG4 SVCD

VCD CD MP3

When playing disc of DVD, MPEG4, SVCD, VCD, CD, Mp3, user can repeatedly play a specific section.

During playback, press “A-B” button at a point A, then press this button again in point B, the unit will automatically repeat playing the part between A-B

A

Press it the third time, the unit will return to normal playback.

AB

Number

A-B

Angle

Angle

During playing DVD disc with multi-angle, press “Angle”

button, the followings will be displayed on screen:

Press number buttons to select the angle you desire

To return to normal playing, please press “Angle” .

The unit will play the disc in the default angle.

Notice

The function is available only for discs with multi-angle.

1 /4

2 /4

3 /4

4 /4

11 12

Zoom in/ out

DVD

MPEG4

SVCD

VCD

When playing disc of DVD, MPEG4, SVCD, VCD, user can zoom in or zoom out the image .

During playback, press “Zoom ” button, the image will be enlarged; press it again the image will be enlarged again; press it fourth time, the image will zoom out, press it repeatedly and the image will return to normal status.

When the image is enlarged, user can press to move the image

4X

1 /2X

1 /3X

1 /4X

2X

3X

Zoom in/out

13

Playing JPEG file

1. Place a JPEG disc into the tray, the unit will start reading and play.

2. Press “MENU” to browse JPEG files.

3. Press to select a JPEG file and press “ OK ” button to confirm.

Note: you can press MENU to return to the folder list. Press or “ OK ” to preview

the file selected

4. To rotate the picture counter-clockwise, press “ “; Press “ “ to rotate the picture

clockwise

5. Press OSD button when viewing pictures, you can select different refresh mode as

follows:

. from top to bottom

. from bottom to top

. from left side to right side

. from right side to left side

. from left top to right bottom

. from right top to left bottom

. from left bottom to right top

. from right bottom to left top

. from horizontal center to both sides

. from vertical center to both sides

from top and bottom to center.

. from right and left to center.

. from four window's top side to bottom side.

. from four window's left side to right side.

. from 4 edges to center.

or "A-B" or "Title" etc; in this situation these options are unavailable to operate.

7. When viewing JPEG files, press " " , pictures will be displayed in thumbnail mode,

press or “OK" button to select one picture to view

Playing MP3 files

1.Place MP3 disc into the disc door or insert USB disk, SD card to USB port or SD card slot.

Press “ ” and “OK” button to choose a MP3 file; Press “ ” or “ OK ” button to play the file selected.

00 36 03 43

Dir 001

\Ctyy\

Mp3

Mp3

Mp3

Mp3

Mp3

......

TRACK01

TRACK02

TRACK03

TRACK04

TRACK05

14

System Setup

--General Setup Page--

TV Display Wide

Angle Mark ON

TV Type NTSC

Screen Saver ON

OSD Lang ENG

Go to General Setup Page

General Setup Page

--General Setup Page--

TV Display Wide

Angle Mark ON

Normal/PS

Normal/LB

TV Type NTSC Wide

Screen Saver ON

OSD Lang ENG

Set TV Display Mode

Press”Setup”button,the main menu will be displayed on the screen

In the General Setup Page, Press button to highlight this item.

Press OK button to access.

Press button to select the setting.

Press OK button to confirm your selection.

Press button to exit.

TV display:

Enter this option,user can set screen display format

(Nomal/PS,Nomal/LB,Wide)

The default is "Wide"

Note

The function depends on the display ratio with which the

DVD disc is recorded.

TV set

Angle Mark:

Enter this option to set the angle during playback.

Optional setting: ON, OFF

The default is: ON

--General Setup Page--

TV Display Wide

Angle Mark ON

TV Type NTSC

On

Off

Screen Saver ON

OSD Lang ENG

Set Angle Ma rk

--General Setup Page--

TV Display Wide

Angle Mark ON

TV Type NTSC PAL

OSD Lang ENG

Set TV Standrd

--General Setup Page--

TV Display Wide

Angle Mark ON

TV Type NTSC

Screen Saver ON

OSD Lang ENG

Set Screen Saver

On

Off

TV Type:

Enter this option to select TV type(PAL,NTSC)

The default is NTSC.

Screen Saver

Enter this option to set whether to activate the screen saver function.

The default is ON.

15

--General Setup Page--

TV Display Wide

Angle Mark ON

TV Type NTSC

Screen Saver ON

OSD Lang ENG

English

French

German

Italian

Set OSD language

Video Setup Page

--Video Setup Page--

Panel Quality

Go to Video Setup Page

Password Setup Page

--Password Setup Page--

Password

Go To Password Setup Page

Preference Page

--Preference Page--

Audio ENG

Subtitle OFF

Disc Menu ENG

Parental

Default

English

French

German

Italian

Preference Audio La nguage

--Preference Page--

Audio ENG

Subtitle OFF

Disc Menu ENG

Parental

Default

English

French

German

Italian

Off

Preferred Subtitle Language

OSD Language:

In the option user can set OSD menu language(English,

French,German,Italian).

The default:English

Enter this option, user can adjust picture quality of video output. There are items available to be adjusted:

Brightness, contrast, Hue and Saturation.

For all these items the default is 00

Enter this option,you can set a password(four numbers).

All parental Control features are password protected.

The default is 8888.

Audio:

Enter this option, user can select your preferred audio language for DVDs.

The default is English

Note

The audio language depend on the material on each disc.

User can also change the audio language during playback

by pressing the Audio button.

Subtitle

Select your preferred language to show the subtitles on the screen.

The default is OFF

The subtitle languages depend on the

information available on each disc,You can also change the subtitle language during playback by press the SUBTITLE button.

16

--Preference Page--

Audio ENG English

Subtitle OFF

Disc Menu ENG

French

German

Italian

Parental

Default

Preferred Menu Language

--Preference Page--

Audio ENG

Subtitle OFF

Disc Menu ENG

Paretal

Default

Set Parental Control

1 KID SAFE

2 G

3 PG

4 PG 13

5 PGR

6 R

7 NC 17

8 ADULT

Disc Menu

This function allows you to choose the menu language stored on the disc.

The default is English.

Note: the disc menu languages depend on the

information available on the disc.

Parental:

Enter this option to set the parental control level to some unsuitable disc scenes being watched by the children.

Optional parental control levels: KID SAFE, G, PG, PG 13, PGR,

R, Nc17, ADULT.

The default of this option is ADULT.

Default:

Select this item and press OK button to reset all settings to the original factory settings.

--Preference Page--

Audio ENG

Subtitle OFF

Disc Menu ENG

Parental

Default Reset

Load Factory Setting

Specification

Compatible disc: DVD/VCD/CD/MP3/MPEG4

Signal system: PAL/NTSC

Panel size: 9 inch

Picture resolution: 640x234(RGB)

Frequency response: 20 Hz to 20 kHz

Video output: 1 Vp-p/75 Ohm, unbalanced

Audio output: 1.4Vrms/10kOhm

Audio S/N: Better than 80 dB

Dynamic range: Better than 85 dB

USB: support USB 1.1

Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm

Power source: DC 9-12V

Power consumption: 10 W

Operating temperature:0~40°C

Weight: 0.89kg

Dimensions (W x D x H): 240 x 184 x 40.5

mm

Battery Type: Li Polymer

Rechargeable battery use

The unit utilizes long-life Li polymer battery for portable power supply. The battery has no "Memory Effect" and thus can be recharged safely regardless of whether the battery is fully or partially discharged. It's enough to recharge no longer than 6H each time, fully recharged battery can last about 2 hours.

Precautions related to Battery Recharge

The battery can be only recharged when turning power to OFF state, and keep continuous power supply, the red light will be on, and the light will turn yellow when it's fully charged.

Using and Maintaining Rechargeable Battery

1. The normal working temperature is: 0

°C

~40

°C

;

2. Always unplug AC/DC power supply for the unit when not in use;

3. Heat will create during playing, it's normal, while avoid long time playing and

unattended;

4. Avoid having the unit collide with any objects, and place away from all possible heat

sources or damp areas.

17 18

Troubleshooting

PROBLEM SOLUTION

No sound or distorted sound

Can't advance through a movie

Make sure the machine is connected properly.

Make sure all cables are securely inserted into the appropriate jacks.

You can't advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action.

The icon appears on screen

The feature or action cannot be completed at this time because:

1. The disc's software restricts it.

2. The disc's software doesn't support the

feature (e.g., angles)

3. The feature is not available at the moment.

4. You've requested a title or chapter number

that is out of range.

Picture is distorted

The disc might be damaged. Try another disc;

It is normal for some distortion to appear during forward or reverse scan.

No forward or reverse scan

Some discs have sections that prohibit rapid scanning or chapter skip;

If you try to skip through the warning information and credits at the beginning of a movie, you won't be able to. This part of the movie is often programmed to prohibit skipping through it.

Owing to continuous improvement, no prior notice will be given regarding changes on above

feature and spec.

19

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents