4793 Connectors (Inlets/Outlets) Description Other versions on request

4793
Connectors (Inlets/Outlets)
www.schurter.com/PG07
IEC Appliance Inlet C20, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal
Snap-In Version
C20
70° C
Description
Other versions on request
Approvals
References
-Panel Mount:
Snap-in, from front side
-Appliance Inlet, Pin temperature 70 °C, Protection class I
-Solder terminals or quick connect terminals
-VDE Certificate Number: 40030341
-UL File Number: E96454
-Types for enhanced glow wire test requirements acc. IEC 60695-212 and -13 for the use in unattended household equipment acc. IEC
60335-1
-Variant with notch for V-Lock mating Cordsets
Alternative: protection class II version 4794 Alternative: version with line filter C20F; 5130 Weblinks
pdf-datasheet, html-datasheet, General Product Information, Approvals,
CE declaration of conformity, RoHS, CHINA-RoHS, REACH, Mating
Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-StockCheck, CAD-Drawings, Accessories, Wire Harnessing, Detailed request
for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
16 A / 250 VAC; 50 Hz
20 A / 250 VAC; 60 Hz
> 2 kVAC between L-N
> 2 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP 30 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Solder terminals or quick connect terminals
Snap-in: 1/1.2/1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Appliance Inlet
C20 acc. to IEC 60320,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 16 A,
Protection Class I
Connectors
1
4793
Connectors (Inlets/Outlets)
www.schurter.com/PG07
Dimensions
4793
21.0
+0.2
32.0 - 0
3.0
24.0 - 0
+0.2
23.9 ±0.10
28.0
36.0
1)
S
31.9 ±0.10
E
1) Panel cut-out
E: Solder terminals: 28.5 mm
E: Quick connect terminals 6.3 x 0.8 mm: 31.5 mm
All Variants
Panel mounting
Panel Thickness
s [mm]
Terminal
Order Number
Snap-in
1
Quick connect terminals 6.3 x 0.8 mm
4793.3000
█
Snap-in
1.2
Quick connect terminals 6.3 x 0.8 mm
4793.8000
█
Snap-in
1.5
Quick connect terminals 6.3 x 0.8 mm
4793.4000
█
Snap-in
1.5
Quick connect terminals 6.3 x 0.8 mm
4793.4000.21
Snap-in
2
Quick connect terminals 6.3 x 0.8 mm
4793.5000
Snap-in
2
Quick connect terminals 6.3 x 0.8 mm
4793.5000.21
Snap-in
2.5
Quick connect terminals 6.3 x 0.8 mm
4793.6000
Snap-in
3
Quick connect terminals 6.3 x 0.8 mm
4793.7000
Snap-in
1
Solder terminals 3.8 x 0.8 mm
4793.3200
Snap-in
1.2
Solder terminals 3.8 x 0.8 mm
4793.8200
Snap-in
1.5
Solder terminals 3.8 x 0.8 mm
4793.4200
Snap-in
2
Solder terminals 3.8 x 0.8 mm
4793.5200
Snap-in
2.5
Solder terminals 3.8 x 0.8 mm
4793.6200
Snap-in
3
Solder terminals 3.8 x 0.8 mm
4793.7200
█ Most Popular.
Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/StockCheck-SCHURTER
Suffix ".21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch
intended for use with the latching cordset. The cord latching system prevents against accidental removal of
the cordset.
Articles for enhanced glow wire test requirements acc. IEC 60695-2-12 and -13 can be ordered with ending
".15" (xxxx.xxxx.15). They are suitable for the use in unattended household equipment acc. IEC 60335-1.
Packaging unit 2
100 Pcs Connectors
max.R3.0
█
█
4793
Connectors (Inlets/Outlets)
www.schurter.com/PG07
Accessories
Description
Wire Harness
Wire harness for SCHURTER products
Assorted Covers
Rear Cover
Cord retaining kits
Cord retaining strain relief
Mating Outlets/Connectors
Category / Description
Connector Overview complete
IEC Connector C19, Rewireable, Straight
4795
IEC Connector C19, Rewireable, Angled
4790
IEC Connector C19, Rewireable, Straight
0104U
Connector further types to 4793
22.04.2015
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
Connectors
3

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project