Toshiba 15DL75 Flat Panel Television User Manual

E
F: FRANÇAIS
F
S: ESPAÑOL
S
Introduction
E: ENGLISH
Connecting
your TV
OWNER'S MANUAL
#01E01_1520DL75
1
Black
(E) 1520DL75
Model number:
Serial number:
Index
15DL75
20DL75
Owner's Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Appendix
Using the TV’s
Features
Setting up
your TV
Using the
Remote Control
LCD Color Television
2/7/05, 11:27 AM
SAFETY INSTRUCTION MANUAL
FOR YOUR TOSHIBA LCD Television
Always read and understand the PRODUCT
WARNINGS and USER DIRECTIONS that are
contained in this manual before attempting to use your
LCD television, to help assure its safe use.
Always store this manual near your LCD television for
convenient future reference.
Dear Customer,
Thank you very much for purchasing this Toshiba LCD
television.
All of the safety Instructions that are contained in this manual
must be read carefully and must be fully understood before you
attempt to use this product in order to avoid potential hazards
that could cause bodily injury or property damage, or could
damage your LCD television.
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
We hope that you are completely satisfied with your Toshiba
LCD television and it will give you long and enjoyable service.
We look forward to providing you with additional Toshiba
products to serve all of your entertainment needs in the future.
Two categories of Safety instructions are included in this
manual:
1. Product Warnings, (i.e. what must never be done, to assure
avoiding those hazards that could cause bodily injury or
property damage).
2. User Directions (i.e. what must always be done, to assure
the safe use of your Receiver/Tuner).
The Safety Instructions contained in this manual have been
categorized in accordance with the seriousness of the
potential hazards, through the use of signal words. Those
Signal Words, and their intended meanings, are as follows:
Indicates that the failure to observe the Safety
Instructions could result in death or catastrophic
bodily injury.
WARNING: Indicates that a failure to observe the Safety
Instructions could result in serious bodily injury.
CAUTION: Indicates that a failure to observe the Safety
Instructions could result in minor bodily injury
or property damage.
NOTE:
Designates Important Information that relates to
the safe use of this product.
DANGER:
WARNING
To prevent injury, this apparatus must be securely attached
to the floor/wall in accordance with the installation
instructions.
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer’s
attention to Article 820-40 of the NEC, which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical. For additional antenna grounding information,
see items 26 and 27 on page 4.
2
#01E02-05_1520DL75
2
Black
(E) 1520DL75
2/7/05, 11:27 AM
Important Safety Instructions
Child Safety
It Makes A Difference
Where Your TV Stands
Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
The Issue
If you are like most consumers, you have a TV in your home.
Many homes, in fact, have more than one TV.
The home theater entertainment experience is a growing
trend, and larger TVs are popular purchases; however, they
are not always supported on the proper TV stands.
Sometimes TVs are improperly secured or inappropriately
situated on dressers, bookcases, shelves, desks, audio
speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.
Toshiba Cares!
The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
The Consumer Electronics
Association formed the Home
Entertainment Support Safety
Committee, comprised of TV and
consumer electronics furniture
manufacturers, to advocate
children’s safety and educate
consumers and their families about
television safety.
Tune Into Safety
One size does NOT fit all! Use appropriate
furniture large enough to support the weight of your
TV (and other electronic components).
Use appropriate angle braces, straps, and anchors to secure
your furniture to the wall (but never screw anything directly
into the TV).
Carefully read and understand the other enclosed
instructions for proper use of this product.
Do not allow children to climb on or play with furniture
and TVs.
Avoid placing any item on top of your TV (such as a VCR,
remote control, or toy) that a curious child may reach for.
Remember that children can become excited while watching
a program and can potentially push or pull a TV over.
Share our safety message about this hidden hazard of the
home with your family and friends. Thank you!
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
www.CE.org
CEA is the Sponsor, Producer and
Manager of the International CES®
1)
2)
3)
4)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
Wide plug
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during
lightning storms or when
unused for long periods of
time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
15) The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
16) CAUTION: To reduce the risk of electric shock, do not use
the polarized plug with an extension cord, receptacle, or
other outlet unless the blades can be inserted completely
to prevent blade exposure.
3
#01E02-05_1520DL75
3
Black
(E) 1520DL75
2/7/05, 11:27 AM
Installation, Care, and Service
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
26) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
Antenna lead-in wire
17) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
18)
DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
Ground clamp
Electric service equipment
Ground clamps
27)
19) Never place or store the TV in direct sunlight; hot, humid
areas; or areas subject to excessive dust or vibration.
Sturdy tie
20) Always place the TV
Hooks
on the floor or a sturdy,
level, stable surface
that can support the
weight of the unit. To
secure the TV, use a
sturdy tie from
TV top
TV side
the hooks on the rear
of the TV pedestal to a wall, pillar, or other immovable
structure. Make sure the tie is tight, secure, and parallel to
the floor. Leave a space of at least 4 inches around the TV.
21) Never expose the apparatus to dripping or splashing liquid
or place items such as vases, aquariums, any other item
filled with liquid, or candles on top of the TV.
22) Never block or cover the slots
or openings in the TV cabinet
back, bottom, and sides.
Never place the TV:
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
• in a confined space such as a bookcase, built-in cabinet,
or any other place with poor ventilation.
The slots and openings are provided to protect the TV
from overheating and to help maintain reliable operation
of the TV.
23) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
Antenna discharge unit
(NEC Section 810-20)
Grounding conductors
(NEC Section 810-21)
Power service grounding
electrode system (NEC Art 250 Part H)
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
• Use extreme care to make sure you are never in
a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never
locate the antenna near overhead
power lines or other electrical
circuits.
• Never attempt to install any of the
following during lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
Care
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
28) If you use the TV in a room whose temperature is 32 ºF (0 ºC)
or below, the picture brightness may vary until the LCD
warms up. This is not a sign of malfunction.
29) Always unplug the TV before
cleaning. Wipe the display
panel surface gently using only
a soft cloth (cotton, flannel,
etc.). A hard cloth may
damage the surface of the
panel. Avoid contact with
alcohol, thinner, benzene, acidic or alkaline solvent
cleaners, abrasive cleaners, or chemical cloths, which may
damage the surface. Do not splay volatile compounds
such as insecticide on the cabinet. This may cause a
discoloration or damage the cabinet.
24) Never overload wall outlets and extension cords.
25) Always operate the TV with
a 120V AC, 60Hz power source
only.
30)
120V AC
WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind
into the TV cabinet slots.
4
#01E02-05_1520DL75
4
Black
(E) 1520DL75
2/7/05, 11:27 AM
31) While it is thundering, do not touch the connecting cables
or apparatus.
32) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
33) During normal use, the TV may make occasional snapping
or popping sounds. This is normal, especially when the
unit is being turned on or off. If these sounds become
frequent or continuous, unplug the power cord and
contact a Toshiba Authorized Service Center.
34)
WARNING: RISK OF
SERIOUS PERSONAL
INJURY OR EQUIPMENT
DAMAGE !
Never strike the screen with a sharp or heavy object.
35) • If you have the LCD screen facing to the sun, the LCD
screen will be damaged. Be aware of locating the TV in
the place such as window side or outside of the room.
• Do not press the LCD screen strongly or scratch it, and
do not putting anything on it. These actions will damage
the LCD screen.
Important notes about your LCD TV
The following symptoms are not signs of malfunction
but technical limitation. Therefore TACP/TCL
disclaims any responsibility for these symptoms.
1) Under certain conditions, the display of this LCD TV may
cause interference with the audio and/or video of certain
types of electronic equipment that easily receive
electromagnetic waves (e.g., AM radios and video
equipment). In particular, the display of this LCD TV may
affect certain types of electronic equipment that are
located beyond the area where the LCD TV is being used.
2) If a still picture is displayed, an afterimage may remain on
the screen, however it will disappear.
3) The LCD panel on this TV is manufactured using an
extremely high level of precision technology; however, an
occasional pixel (dot of light) may display constantly on
the screen.
This is a structural property of LCD technology and is not
a sign of malfunction.
Such pixels are not visible when the picture is viewed from
a normal viewing distance.
Note: Interactive video games that involve shooting a
“gun” type of joystick at an on-screen target may not work
on this TV.
Service
36)
WARNING: RISK OF ELECTRIC SHOCK !
Never attempt to service the TV yourself. Opening
and removing the covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
a Toshiba Authorized Service Center.
37) If you have the TV serviced:
• Ask the service technician to use only replacement parts
specified by the manufacturer.
• Upon completion of service, ask the service technician to
perform routine safety checks to determine that the TV is
in safe operating condition.
38) The cold cathode fluorescent lamp in the LCD panel
contains a small amount of mercury.
When the TV reaches the end of its useful life, dispose of
the used TV by the approved method for your area, or ask
a qualified service technician to properly dispose of the
TV.
Note: The lamp unit contains mercury, the
disposal of which may be regulated due to
environmental considerations. For disposal or
recycling information, contact your local authorities or the
Electronics Industries Alliance (www.eiae.org).
5
#01E02-05_1520DL75
5
Black
(E) 1520DL75
2/7/05, 11:28 AM
Introduction ................................................................ 7
Welcome to Toshiba ......................................................... 7
Supplied accessories ......................................................... 7
Connecting the power cord .............................................. 7
Exploring your new TV ................................................... 8
Rear terminal cover ................................................... 9
Cable clamper ........................................................... 9
Adjusting the TV viewing angle ................................ 9
Connecting your TV ................................................ 10
Connecting an antenna or cable TV ............................... 10
Connecting a VCR ........................................................ 11
Connecting a cable converter box .................................. 11
Connecting a cable converter box and a VCR ................ 11
Connecting a DVD player with ColorStream®
(component video) and a VCR ...................................... 12
Connecting a DTV receiver/set-top box with
ColorStream® (component video) and a VCR ................ 13
Connecting an audio system .......................................... 14
Connecting a camcorder ................................................ 14
Connecting a personal computer (PC) ........................... 15
Adjusting the sound ....................................................... 26
Muting the sound ................................................... 26
Selecting stereo/SAP broadcasts .............................. 26
Using the WOW™ surround sound feature ........... 27
Selecting the audio mode ........................................ 27
Adjusting the sound quality .................................... 28
Using the StableSound® feature .............................. 28
Using the PC setting feature .......................................... 29
Using the Auto off feature .............................................. 30
Displaying on-screen information .................................. 30
Understanding the last mode memory feature ................ 30
Appendix ................................................................... 31
Specifications ................................................................. 31
Troubleshooting ............................................................. 32
Limited United States Warranty ..................................... 33
Limited Canada Warranty .............................................. 34
Index .......................................................................... 35
Using the remote control ...................................... 16
Learning about the remote control ................................. 16
Installing the remote control batteries ............................ 16
Remote control effective range ....................................... 16
Setting up your TV .................................................. 17
Learning about the menu system ................................... 17
Changing the on-screen display language ....................... 18
Adding channels to the TV’s memory ............................ 18
Programming channels automatically ...................... 18
Adding and erasing channels manually .................... 19
Changing channels ........................................................ 19
Programming your favorite channels .............................. 19
Using the TV’s features .......................................... 20
Switching between two channels using Channel
Return ........................................................................... 20
Using the Blue screen feature ......................................... 20
Selecting the video input source ..................................... 20
Using the V-Chip menu ................................................. 21
V-Chip rating and categories ................................... 21
V-Chip (Parental menu) setup ....................................... 22
Adjusting the picture ..................................................... 23
Selecting the picture mode ...................................... 23
Adjusting the picture quality ................................... 23
Using the closed caption feature ..................................... 24
To turn on or off the Closed Caption feature .......... 25
Using the Panel lock feature ........................................... 25
Setting the sleep timer .................................................... 25
6
#01E06_1520DL75
6
Black
(E) 1520DL75
2/7/05, 11:28 AM
E
F
Introduction
S
Introduction
Welcome to Toshiba
Connecting
your TV
Thank you for purchasing this Toshiba LCD TV, one of the most
innovative LCD color TVs. The goal of this manual is to guide you
through setting up and operating your Toshiba TV as quickly as
possible.
The model and serial numbers are on the back of your TV. Write
these numbers in the space provided on the front cover of this manual
for your records.
Instructions in this manual are based on using the remote control.
You also can use the controls on the TV if they have the same name as
those referred to on the remote control.
Please read all the safety and operating instructions carefully, and keep
this manual for future reference.
Using the
Remote Control
Supplied accessories
Check that you have the accessories and items shown.
Remote control
Batteries for the remote control
R03 (AAA) × 2
Power cord
Setting up
your TV
Owner’s Manual
(This book)
Using the TV’s
Features
Connecting the power cord
Back of TV
VIDEO L/MONO
R
AUDIO
VIDEO OUT
Appendix
Wall outlet
120V AC 60Hz
*
Index
Power cord (supplied)
The power cord supplied with this product is to be used in United States and Canada only. If this product is
used in another country, use a power cord which confirms to the law or regulations of that country.
7
#01E07-09_1520DL75
7
Black
(E) 1520DL75
2/7/05, 11:28 AM
Exploring your new TV
Introduction
You can operate your TV by using the buttons on the top panel or the
remote control. The A/V terminals for connecting other equipment to
your TV are on the back panel and side panel (see illustrations below).
Also see “Connecting your TV” on pages 10-15.
Model 20DL75 is used in this manual for illustration purpose.
Top panel
Volume - +
TV/VIDEO
Channel z y POWER
Remote control
TV/VIDEO
VOLUME
CHANNEL
POWER
MUTE
Left Side
Terminals
HEADPHONE jack
TV front
POWER
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
9
CH RTN
C
0
VIDEO-2
INPUT
100/
CH
VOL
ENTER
VOL
CH
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
Remote sensor
Power indicator
FAV. CH
Back
Terminal cover removed.
(see page 9)
Power cord
VIDEO L/MONO
R
AUDIO
VIDEO OUT
AUDIO OUT
Y
PB
Cable clamper
PR
R
L/MONO VIDEO
AUDIO
COLOR STREAM
RGB
PC AUDIO
PC INPUT
PC AUDIO IN
ANT
IN
VIDEO 1 (ColorStream)
RGB/PC IN
8
#01E07-09_1520DL75
8
Black
(E) 1520DL75
2/7/05, 11:28 AM
E
Rear terminal cover
The connection panel is hidden behind the terminal cover.
1. Remove the cover. Release the three hooks on the bottom
of the cover.
2. Install cables as necessary.
3. Reinstall the cover. Align the holes on the TV back with the
two tabs on the rear terminal cover as shown.
4. Close the cover.
F
Using the
Remote Control
Connecting
your TV
Introduction
S
Cable clamper
The cable clamper can be used to bundle the connection cables
(see page 10).
Setting up
your TV
WARNING: RISK OF
SERIOUS PERSONAL
INJURY OR EQUIPMENT
DAMAGE !
Never grasp the cable clamper when
moving or lifting the TV. The cable clamper
could break, causing the TV to fall.
Using the TV’s
Features
Cable clamper
Adjusting the TV viewing angle
You can adjust the angle of the TV screen.
Tilt angle
Index
Appendix
Swivel angle
9
#01E07-09_1520DL75
9
Black
(E) 1520DL75
2/7/05, 11:29 AM
Connecting your TV
Note: All required cables, if not provided with your other devices, can be
purchased at many electronics accessory suppliers.
●
●
Connecting
your TV
●
Coaxial (F-type) cable is used for connecting your antenna, cable TV
service, and/or cable converter box to the ANT 75 Ω RF inputs on your
TV.
Standard A/V cables (composite video) usually come in sets of three,
and are for use with video devices with standard audio and standard
(composite) video output. These cables (and the related inputs on your
TV) are typically color-coded according to use: yellow for video, red
for stereo right audio, and white for stereo left (or mono) audio.
S-video cable is for use with video devices with S-video output. Separate
audio cables are required for a complete connection.
Coaxial (antenna) cable
Standard A/V cables (red/white/yellow)
S-video cable
Note: An S-video cable provides better picture performance than a
composite video cable.
●
Component video cables come in sets of three and are for use with
video devices with component video output. These cables are typically
color-coded red, green, and blue. (ColorStream® is Toshiba’s brand of
component video.) Separate audio cables are required for a complete
connection.
Note: Component video cables provide better picture performance than a
standard (composite) video or S-video cable.
●
Mini D-sub 15pin cable is for use with a personal computer with an
analog RGB (15pin) output. Separate audio cable is required for a
complete connection.
Connecting an antenna or cable TV
This connection allows you to watch TV programs or basic cable
channels.
Component video cables
Mini D-sub 15pin cable
Audio cable
NOTE: RISK OF
EQUIPMENT DAMAGE !
Never plug in any power cords
until you have finished connecting all
equipment.
From Antenna or Cable
Back of TV
Y
PB
PR
R
L/MONO VIDEO
AUDIO
COLOR STREAM
RGB
PC AUDIO
PC INPUT
10
#01E10-15_1520DL75
10
Black
(E) 1520DL75
2/7/05, 11:29 AM
E
Connecting a VCR
F
If you have a VCR with S-video, use an
S-video cable (in the S-video jacks) instead of
a standard video cable.
Stereo VCR
VIDEO
From Cable
Box or
Antenna
AUDIO
L
R
The TV side panel can be used to connect a
VCR with S-video.
IN
IN from ANT OUT to TV
CH 3
CH 4
S
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
Introduction
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
OUT
Y
PB
PR
R
L/MONO VIDEO
AUDIO
COLOR STREAM
RGB
Connecting
your TV
Back of TV
PC AUDIO
PC INPUT
This connection allows you to watch basic and premium cable channels.
Tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), and use the converter box to change channels.
Using the
Remote Control
Connecting a cable converter box
Note:
When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, and channel return function.
Back of TV
From Cable
VIDEO
RGB
PC AU
PC INPUT
Setting up
your TV
IN
OUT
Cable box
Connecting a cable converter box and a VCR
Note:
When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, and channel return function.
Using the TV’s
Features
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Set the TV signal source
to Video1 (page 20). Tune the VCR to channel 3 or 4 (the same
channel as the converter box output switch), and use the cable
converter box to change channels.
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S-video cable (in the S-video jacks) instead of
a standard video cable.
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
The TV side panel can be used to connect a
VCR with S-video.
Appendix
Stereo VCR
From Cable
IN OUT
Cable box
Y
PB
PR
R
L/MONO VIDEO
AUDIO
COLOR STREAM
PC AUDIO
PC INPUT
Index
Back of TV
RGB
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
11
#01E10-15_1520DL75
11
Black
(E) 1520DL75
2/7/05, 11:29 AM
Connecting a DVD player with ColorStream®
(component video) and a VCR
Connecting
your TV
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs.
Your TV has ColorStream® (component video) inputs. Connecting
your TV to a DVD player with component video can greatly enhance
picture quality and realism.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
– To record a TV program while watching a DVD, tune the VCR to
the channel to record, and select Video1 on the TV (see “Selecting
the video input source” on page 20).
From
Antenna
Note:
For the highest possible picture quality, use
component video cables between the TV and
DVD player.
The TV side panel can be used to connect a
VCR with S-video.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Stereo VCR
IN from ANT OUT to TV
VIDEO
AUDIO
L
R
TV side pannel
IN
CH 3
CH 4
OUT
Back of TV
Y
PB
PR
R
L/MONO VIDEO
AUDIO
RGB
COLOR STREAM
Y
S-VIDEO
PB
PC AUDIO
PC INPUT
PR
COMPONENT VIDEO
VIDEO
OUT
L
AUDIO
OUT
L
R
R
DVD player with component video
12
#01E10-15_1520DL75
12
Black
(E) 1520DL75
2/7/05, 11:30 AM
E
F
Connecting a DTV receiver/set-top box with
ColorStream® (component video) and a VCR
From Antenna
Introduction
Note:
For the highest possible picture quality, use
component video cables between the TV and
DTV receiver/set-top box.
The TV side panel can be used to connect a
VCR with S-video.
Connecting
your TV
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Using the
Remote Control
This connection allows you to watch DTV (digital TV), VCR, and
TV programs, and record DTV (composite video only) and TV
programs.
Your TV has ColorStream® (component video) inputs. Connecting
your TV to a DTV receiver with component video can greatly
enhance picture quality and realism.
– To record and watch a DTV program, select LINE IN on the
VCR, and select Video1 on the TV (see “Selecting the video input
source” on page 20).
– To record a TV program while watching a DTV program, tune the
VCR to the channel to record, and select Video1 on the TV.
– To record and watch the same TV program, tune the VCR to the
channel to record, and select Video1 on the TV.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
S
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
Setting up
your TV
TV side pannel
Back of TV
Y
PB
PR
R
L/MONO VIDEO
AUDIO
RGB
PC INPUT
Using the TV’s
Features
COLOR STREAM
PC AUD
Y
PB
PR
L
AUDIO
OUT
L
R
R
Appendix
From
DTV Antenna
Satelite IN
S-VIDEO
COMPONENT VIDEO
VIDEO
OUT
Index
DTV Receiver with component video
13
#01E10-15_1520DL75
13
Black
(E) 1520DL75
2/7/05, 11:30 AM
Connecting an audio system
This connection allows you to hear the TV sound through external
speakers connected to an audio amplifier. The audio signal level
(fixed) is not affected by pressing the volume buttons on the TV or
the TV’s remote control. To control the audio through the amplifier,
use the remote control for your audio system.
Note:
Set the TV’s volume to the minimum level if
necessary.
Amplifier
Connecting
your TV
LINE IN
L
R
Back of TV
VIDEO L/MONO
R
AUDIO
VIDEO OUT
Y
PB
PR
R
L/MONO VIDEO
AUDIO
COLOR STREAM
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
VIDEO
Note:
If you have a camcorder with S-video, use an
S-video cable instead of a standard video
cable for better picture performance.
AUDIO
OUT
L
R
Camcorder
Video 2 (side panel)
14
#01E10-15_1520DL75
14
Black
(E) 1520DL75
2/7/05, 11:30 AM
E
Connecting a personal computer (PC)
F
S
Introduction
Note:
• Some PC models cannot be connected to
this TV.
• There is no need to use an adapter for
computers with DOS/V compatible mini Dsub 15pin terminal.
• Depending on the specification of the PC
you are playing the DVD-Video on, and the
DVD’s title, some scenes may be skipped,
or you may not be able to pause during
multi-angle scenes.
Connecting
your TV
This connection allows you to see the image of the personal computer
on the TV screen. When connecting a personal computer to the TV,
use an analog RGB (15pin) computer cable and an audio cable for
PC.
– To use a personal computer, set the monitor output resolution on
the personal computer before connecting to the TV. The following
signals can be displayed.
• VGA:VESA 640 × 480 @ 60Hz (20DL75)
• XGA:VESA 1024 × 768 @ 60Hz (15DL75)
Other formats may result in reduced picture quality.
– To display optimum picture, use the PC setting feature. (See
“Using the PC setting feature” on page 29).
Back of TV
VIDEO OUT
Y
PB
PR
R
L/MONO VIDEO
AUDIO
COLOR STREAM
RGB
PC AUDIO
PC INPUT
Using the
Remote Control
VIDEO L/MONO
R
AUDIO
Computer
Audio
output
Audio cable
Setting up
your TV
RGB/PC
output
Index
Appendix
Using the TV’s
Features
Conversion
adaoter
(if necessary)
15
#01E10-15_1520DL75
15
Black
(E) 1520DL75
2/7/05, 11:30 AM
Using the remote control
Learning about the remote control
MUTE
POWER
TV/VIDEO
MTS
RECALL
MUTE mutes the sound (page 26)
1
2
3
RECALL displays on-screen information (page 30)
4
5
6
7
8
POWER turns the TV on and off (Standby)
The power indicator is illuminated in red.
MTS switches Stereo or SAP sound (page 26)
TV/VIDEO selects the video input source (page 20)
Channel Numbers (0-9, 100) allow direct access to channels (page 20)
0
CH RTN returns to the last viewed channels (page 20)
ENTER sets programming menu information (page 17)
VOL
Using the
Remote Control
ENTER
VOL
CH
CH yz cycles through programmed channels (page 18)
CC selects the Caption or Text mode (page 24, 25)
100/
CH
yz x • select or adjust programming menus (page 17)
VOL - + adjusts the volume level
9
CH RTN
C
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
MENU allows access to on-screen programming menus (page 17)
FAV. CH
EXIT exits the programming menus (page 17)
SLEEP allows access to the automatic TV shut-off function (page 25)
PICTURE selects the picture mode (page 23)
SOUND selects the sound mode (page 28)
FAV. CH cycles through favorite channels (page 19)
Installing the remote control batteries
To install the batteries:
1. Open the battery cover of the back of the remote control.
2. Install two batteries (R03 size “AAA”). Match the + and – signs
on the batteries to the signs on the battery compartment.
Caution:
Never throw batteries into a fire.
Note:
• Always dispose of batteries in a designated
disposal location.
• Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
3. Close the battery on the remote control until the lock snaps.
Remote control effective range
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
• When necessary to replace batteries in the
remote control always replace both
batteries with new ones. Never mix battery
types or use new and used batteries in
combination.
• Always remove batteries from remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
16
#01E16_1520DL75
16
Black
(E) 1520DL75
2/7/05, 11:31 AM
E
F
Setting up your TV
S
Introduction
Learning about the menu system
Connecting
your TV
After you have installed the batteries, you will need to set some
preferences on the TV by using the menu system. You can access the
menu system using the buttons on your TV or the remote control.
1. Press MENU to display the menu system.
2. Press x or • to select a menu.
3. Press z, and then press y or z to select an item.
4. Press •, and then press y or z to select or adjust a setting.
5. Press ENTER to activate the channel program settings.
To return to the previous the menu, press EXIT.
To erase the menu display, press MENU.
MUTE
POWER
Picture
Contrast
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
Using the
Remote Control
Picture Mode
Brightness
Color
Sharpness
Sound
Tint
Bass
Treble
ENTER MENU
Balance
Stable sound
WOW
9
CH RTN
C
Channel
ENTER
Auto MENU
prog.
0
100/
Manual prog.
ENTER
CH
Favorite ch.
Blue screen
ENTER
VOL
Setting up
your TV
VOL
yzx •
CH
ENTER MENU
EXIT
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
MENU
Using the TV’s
Features
FAV. CH
Special
Language
Caption/Text
Captions
Panel lock
V-Chip
PC
Auto off
H-Position
V-Position
ENTER MENU
Clock
Auto configure
Reset
Index
ENTER MENU
Note:
The PC mode is selectable only when in the
PC input mode (see “Selecting the video
input source” on page 20).
Appendix
Phase
17
#01E17-19_1520DL75
17
Black
(E) 1520DL75
2/7/05, 11:31 AM
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen display of adjustment menus and messages.
To select a language:
1. Press MENU, and then press x or • until the Special menu
appears.
2. Press z, and then press y or z to highlight Language.
3. Press •, and then press y or z to select your desired language.
1
2
3
4
5
6
7
8
9
CH RTN
C
0
100/
CH
VOL
ENTER
VOL
yzx •
CH
Special
Language
Caption/Text
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
English
Captions
Español
Panel lock
Français
V-Chip
MENU
FAV. CH
Auto off
ENTER EXIT MENU
Setting up
your TV
Adding channels to the TV’s memory
When you press CH y or CH z, your TV will stop only on the
channels you program into the TV’s channel memory.
Follow the steps below and on the next page to program all active
channels into the TV’s memory.
Note:
• To tune the TV to a channel not
programmed in the channel memory, you
must use the Channel Number buttons on
the remote control.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them into its memory. After the channels are programmed
automatically, you can manually add or erase individual channels (see
page 19).
To program channels automatically:
1. Press MENU, and then press x or • until the channel menu
appears.
2. Press z, and then press y or z to highlight Auto prog.
• If you press the ENTER button in auto
programming, the function will stop and
only channels programmed up to that time
will remain.
MUTE
POWER
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
Channel
Auto prog.
Manual prog.
Favorite ch.
Blue screen
To start
0
ENTER EXIT MENU
100/
VOL
ENTER
MENU
CC
SOUND
PICTURE
SLEEP
Manual prog.
TV
4
Blue screen
STOP
4. Press CH y or CH z to view the programmed channels.
18
#01E17-19_1520DL75
18
Black
(E) 1520DL75
yzx •
CH yz
EXIT
FAV. CH
%
VOL
CH
Channel
Auto prog.
2
ENTER
CH
3. Press ENTER to start auto programming. The TV will
automatically cycle through all the TV and Cable channels, and
store all active channels in the channel memory.
Favorite ch.
9
CH RTN
C
2/7/05, 11:31 AM
MENU
E
Channel
F
TV top panel
VOLUME
POWER
Channel zy
MUTE
Auto prog.
CHANNEL
Introduction
TV/VIDEO
S
POWER
Connecting
your TV
Adding and erasing channels manually
After you have automatically programmed the active channels into
the TV’s channel memory, you can manually add or erase specific
channels.
To add or erase channels:
1. Press MENU, and then press x or • until the channel menu
appears.
2. Press z, and then press y or z to highlight Manual prog.
3. Press •, and then press x or • to select a channel you want to
add or erase.
Manual prog.
Favorite ch.
TV
Blue screen
4
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
9
0
100/
Erase
EXIT
CH RTN
C
ENTER
CH
Changing channels
VOL
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press
100, 2, 5.
To change to the next programmed channel:
Press CH y or CH z on the TV or remote control.
Channel
Number
ENTER
VOL
yzx •
CHyz
CH
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
FAV. CH
Using the
Remote Control
4. Press z, and then press x or • to select Memory (add) or Erase.
The current channel is added to Memory or erased from the
channel list.
MENU
Setting up
your TV
OK MENU
FAV. CH
Programming your favorite channels
Using the TV’s
Features
You can preset up to 8 of your favorite channels using the Favorite
Channel Programming feature. Because this feature scans through
only your favorite channels, it allows you to skip other channels you
do not normally watch.
To program your favorite channels:
1. Press MENU, and then press x or • until the Channel menu
appears.
2. Press z, and then press y or z to highlight Favorite ch..
3. Press ENTER to display the Favorite ch. menu.
Favorite Ch.
TV
4
–––––––––––
Auto prog.
–––––––––––
Manual prog.
–––––––––––
Favorite ch.
Appendix
Channel
–––––––––––
To set
Blue screen
–––––––––––
–––––––––––
–––––––––––
ENTER EXIT MENU
OK MENU EXIT
Index
4. Press y or z to select the first favorite channel position.
5. Press x or • to set the desired channel number for first favorite
channel.
6. Repeat steps 4 to 5 to program other channels.
To select your favorite channels:
Press FAV. CH repeatedly.
19
#01E17-19_1520DL75
19
Black
(E) 1520DL75
2/7/05, 11:32 AM
Using the TV’s features
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
To switch between two channels:
1. Select the first channel (or video mode) you want to view.
2. Select a second channel using the Channel Number buttons
(0–9, 100).
3. Press CH RTN. The previous channel will be displayed.
Each time you press CH RTN, the TV will switch back and forth
between the last two channels that were selected.
MUTE
POWER
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
9
0
100/
TV/VIDEO
Channel
Number
CH RTN
C
CH RTN
CH
Using the Blue screen feature
VOL
With the Blue screen function On, the screen will automatically turn
blue and the sound will be muted when no signal is received.
To turn on the Blue screen:
1. Press MENU, and then press x or • until the Channel menu
appears.
2. Press z, and then press y or z to highlight Blue screen.
3. Press •, and then press y or z to select On.
ENTER
VOL
yzx •
CH
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
MENU
FAV. CH
Channel
Auto prog.
Manual prog.
Favorite ch.
On
Blue screen
OK MENU
Using the TV’s
Features
Note:
If the Blue screen comes on and off due to
poor signal strength, select Off in step 3.
Off
EXIT
Selecting the video input source
Press TV/VIDEO to view a signal from another device connected to
your TV, such as a VCR or DVD player. You can select Video1
(including ColorStream), Video2, or PC depending on which input
jacks are used for connecting the devices (see “Connecting your TV” on
page 10).
TV top panel
TV/VIDEO
VOLUME
TV/VIDEO
Video 1
Video 2
PC
20
#01E20-22_1520DL75
20
Black
(E) 1520DL75
2/7/05, 11:32 AM
CHANNEL
POWER
E
Using the V-Chip menu
S
Introduction
Some TV programs and movies include signals that classify the
content of the program (violence, sex, dialog, language). The V-Chip
control feature in this TV detects the signals and blocks the programs
according to your selections. To use this feature, perform the
following setup.
1. Ratings and categories to be blocked.
2. Set a password
3. Enable the lock
F
Note:
The V-Chip function is available for the U.S.
V-Chip system only. The Canadian V-Chip
system is not supported.
Connecting
your TV
V-Chip rating and categories
Rating guidelines are provided by broadcast stations. Most television
programs and television movies can be blocked by TV Rating and/or
Individual Categories. Movies that have been shown at the theaters or
direct-to-video movies use the Movie Rating System (MPAA) only.
For Movies previously shown in theaters :
Setting up
your TV
Using the
Remote Control
Movie Ratings :
• Unblocked
• G and Above
(general audience)
• PG and Above
(parental guidance suggested)
• PG-13 and Above (13 years and older)
• R and above
(restricted)
• NC-17 and Above (18 years and older)
• X
(adult)
If you set PG-13 and Above : G and PG movies will be available ,
PG-13, R, NC-17 and X will be blocked.
For Television programs including made-for-TV movies:
Using the TV’s
Features
General TV Ratings:
• Unblocked
• TV-G and Above
(general audience) (individual categories do
not apply)
• TV-PG and Above (parental guidance suggested)
• TV-14 and Above (14 years and older)
• TV-MA
(mature audience)
Children TV Ratings:
• Unblocked
• TV-Y and Above
(youth)
(individual content categories do not apply)
• TV-Y7
(youth, 7 years and up)
•
•
•
•
(applies to TV-PG and Above,
TV-14)
Language - adult language
(applies to TV-PG and Above,
TV-14 and Above, TV-MA)
Sex scenes - sexual situations (applies to TV-PG and Above,
TV-14 and Above, TV-MA)
Violence
(applies to TV-PG and Above,
TV-14 and Above, TV-MA)
F Violence - fantasy violence (applies only to TV-Y7)
No Rating
(blocks all viewing)
Index
•
Appendix
Content Categories:
• Dialog - sexual dialogue
21
#01E20-22_1520DL75
21
Black
(E) 1520DL75
2/7/05, 11:32 AM
V-Chip ( Parental menu) setup
1. Press MENU, and then press x or • until the Special menu
appears.
2. Press z, and then press y or z to highlight V-Chip.
Press Enter.
Special
Special
Language
Language
Caption/Text
Caption/Text
Captions
Captions
Panel lock
To set
MUTE
V-Chip
Auto off
Auto off
ENTER EXIT MENU
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
9
0
100/
Enter code
Panel lock
V-Chip
POWER
_
Number
CH RTN
C
ENTER EXIT MENU
ENTER
CH
• If Lock is already set, enter the password requested.
• The TV is set with the initial
Parental
password “0-0-0-0”.
On
Lock
Off
Set password
3. Setting Lock on/off:
MPAA
Press y or z to highlight Lock.
Age block
Content block
Press •, and then press y or z to
Aux block
select On (Lock) or Off (Unlock).
VOL
ENTER
VOL
yzx •
CH
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
FAV. CH
MENU
ENTER MENU
Parental
Lock
4. Set password:
Press y or z to highlight Set
password.
Press •, and then enter a four digit
password.
Enter it again when requested.
Ent. code
Set password
MPAA
Rep. code
Age block
_ _ _ _
Content block
Aux block
0 ~ 9 Ebter Password
Using the TV’s
Features
5. Press y or z to highlight type of blocking to be set.
6. Press •, and then press y or z to select type of ratings to block.
• Age block and content block menus, also have sub menus. So,
repeat steps 5 and 6 in the sub menu, to set the types of
blocking and ratings.
Parental
Lock
General
Set password
Children
MPAA
If you try to watch a TV program that exceed
the rating limits you set, the TV enters program
lock mode.
Parental
Unblocked
TV–G & above
TV–PG & above
Age block
To set
TV–14 & above
Content block
TV–MA
Aux block
ENTER MENU
ENTER MENU
Parental
Parental
Unblocked
Lock
Dialog
Set password
Language
TV–PG & above
MPAA
Sex
TV–14
Age block
Violence
Content block
To set
F.Violence
Aux block
ENTER MENU
ENTER MENU
22
#01E20-22_1520DL75
22
Black
(E) 1520DL75
2/7/05, 11:33 AM
E
Adjusting the picture
F
Selecting the picture mode
You can select your desired picture type from four picture modes:
Dynamic, Standard, Movie, or Memory.
Dynamic
Standard
Movie
Memory
Bright and dynamic picture (factory setting)
Standard picture setting (factory setting)
Movie-like picture setting (factory setting)
Your personal preference
To select the picture mode:
Press PICTURE repeatedly to select the mode you prefer.
MUTE
Optimum
Clear
Introduction
Picture Quality
POWER
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
Connecting
your TV
Mode
S
Note:
If you select one of the factory-set picture
modes (Dynamic, Standard, or Movie) and
then change a picture quality setting (for
example, increase the contrast), the picture
mode automatically changes to Memory in
the Picture menu.
9
CH RTN
C
0
100/
Using the
Remote Control
Soft
User
CH
VOL
You can also select the picture mode by using the Picture menu:
1. Press MENU, and then press x or •
until the Picture menu appears.
Picture
Picture Mode
2. Press z, and then press z or y to
Contrast
Clear
Brightness
highlight Picture Mode.
Optimum
Color
Soft
Sharpness
3. Press •, and then press z or y to
User
Tint
select the mode you prefer.
ENTER
VOL
yzx •
CH
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
FAV. CH
MENU
Setting up
your TV
PICTURE
ENTER EXIT MENU
Adjusting the picture quality
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, color, sharpness, and tint.
contrast
brightness
color
sharpness
tint
lower
darker
paler
softer
reddish
•
Pressing
To adjust the picture quality:
1. Press MENU, and then press x or •
until the Picture menu appears.
2. Press z, and then press y or z until
the item you want to adjust is
highlighted.
higher
lighter
deeper
sharper
greenish
Note:
If you continue to adjust the other item, press
y or z in step 4.
Picture
Picture Mode
Contrast
Brightness
Color
Sharpness
Contrast
Tint
3. Press Enter.
4. Press x or • to adjust the level.
Using the TV’s
Features
x
Appendix
Selection
85
ENTER EXIT MENU
Contrast
85
Index
The Picture qualities you adjusted can be saved in the TV’s memory.
23
#01E23-25_1520DL75
23
Black
(E) 1520DL75
2/7/05, 11:33 AM
Using the closed caption feature
The closed caption feature has two options:
• Captions—An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually marked as “CC” in TV listings).
• Text—An on-screen display of information not related to the
current program, such as weather or stock data (when provided
by individual stations).
To select captions or text:
1. Tune the TV to the desired program.
2. Press MENU, and then press x or • to display Special menu.
3. Press z, and then press y or z to highlight Caption/Text.
MUTE
POWER
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
9
CH RTN
C
0
100/
CH
VOL
ENTER
VOL
yzx •
CH
Special
Language
Caption/Text
Captions
Panel lock
V-Chip
Auto off
CC1
Text1
CC2
Text2
CC3
Text3
CC4
Text4
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
FAV. CH
MENU
ENTER EXIT MENU
4. Press •, and then press y or z to select desired Caption or Text
mode.
Special
Language
Caption/Text
Captions
Panel lock
V-Chip
Auto off
CC1
Text1
CC2
Text2
CC3
Text3
CC4
Text4
ENTER EXIT MENU
• To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays
translation of the primary language in your area).
Note: If the program or video you selected is not closed captioned, no
captions will display on the screen.
Note:
A closed caption signal may not display in the
following situations:
• When a videotape has been dubbed
• When the signal reception is weak
Using the TV’s
Features
• When the signal reception is nonstandard
Giant pandas eat leaves.
• To view text, select Text1, Text2, Text3, or Text4.
Note: If text is not available in your area, a black rectangle may appear on
your screen. If this happens, turn the Closed Caption feature Off.
WORLD WEATHER
LONDON
MOSCOW
PARIS
ROME
TOKYO
Temps
F
C
51
11
57
14
53
12
66
19
65
18
Current
Weather
Clear
Cloudy
Clear
Cloudy
Rain
24
#01E23-25_1520DL75
24
Black
(E) 1520DL75
2/7/05, 11:33 AM
E
F
1
2
3
4
5
6
7
8
S
9
Introduction
To turn on or off the Closed Caption feature
1. Press MENU, and then press x or • to display the Special menu.
2. Press z, and then press y or z to highlight Captions.
3. Press •, and then press y or z to select On, EZ Mute or Off.
• EZ Mute shows the selected Caption or Text when the TV
sound is muted.
CH RTN
C
0
100/
CH
Special
VOL
Language
ENTER
VOL
yzx •
Caption/Text
Captions
On
Panel lock
EZ Mute
V-Chip
Off
CH
Auto off
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
MENU
FAV. CH
The CC button on the remote control can also be used to select On,
EZ Mute or Off mode.
Connecting
your TV
CC
ENTER EXIT MENU
Using the Panel lock feature
TV/VIDEO
VOLUME
CHANNEL
Using the
Remote Control
TV top panel
POWER
Control buttons
MUTE
POWER
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
Setting up
your TV
You can lock the control buttons on the TV to prevent your settings
from being changed accidentally (by children, for example).
When the Panel lock is On, no control buttons on the TV top panel
will operate.
To lock the top panel:
1. Press MENU, and then press x or • to display the Special
menu.
2. Press z, and then press y or z to highlight Panel lock.
3. Press •, and then press y or z to select On.
Special
Language
Caption/Text
Captions
On
Panel lock
Off
V-Chip
Auto off
To unlock the top panel:
Select Off in step 3 above.
0
100/
CH
VOL
ENTER
yzx •
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
SLEEP
MENU
Appendix
FAV. CH
30
Every time you press the button, the time display will increase by
30 minutes, up to 120 minutes.
30 → 60 → 90 → 120 →
To cancel the sleep timer:
Press SLEEP until “Sleep
” appears.
Note :
• When an instant power failure occurs, the
sleep timer settings may be cleared.
• To display the amount of time left until the
TV turns off automatically, press SLEEP.
Index
Sleep
VOL
CH
Setting the sleep timer
To set the sleep timer to turn off the TV automatically:
1. Press SLEEP to set the length of time until the TV turns off.
9
CH RTN
C
Using the TV’s
Features
ENTER EXIT MENU
25
#01E23-25_1520DL75
25
Black
(E) 1520DL75
2/7/05, 11:34 AM
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is
off, the screen will display “ Mute” in the lower left corner.
When you select “MUTE” mode, the closed caption feature is
automatically activated. To deactivate this feature, deactivate MUTE.
This feature works only when the closed caption mode is set to EZ
Mute. See “Using the closed caption feature” on page 24 for more
information.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to listen to
high-fidelity stereo sound while watching TV. MTS can also transmit
a second audio program (SAP) containing a second language, music,
or other audio information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the word “Stereo” or
“SAP” appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available when the TV is in Video mode.
To listen to stereo sound:
Press MTS repeatedly to select Stereo.
MUTE
MUTE
POWER
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
MTS
0
100/
CH
VOL
ENTER
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
FAV. CH
Using the TV’s
Features
SAP
You will hear the station’s second audio program (if available)
from the speakers, while viewing the original program’s picture.
26
26
(E) 1520DL75
VOL
CH
You can leave your TV in Stereo mode because it will
automatically output the type of sound being broadcast (stereo or
monaural).
If the stereo sound is noisy, select Mono to reduce the noise.
To listen to SAP (if available):
Press MTS repeatedly to select SAP.
Black
9
CH RTN
C
Stereo
#01E26-30_1520DL75
RECALL
2/7/05, 11:34 AM
E
Sound
Bass
F
Note:
If the broadcast is monaural, the WOW sound
effect will not work.
Introduction
MUTE
S
POWER
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
Connecting
your TV
Using the WOW™ surround sound feature
WOW surround widens and deepens audio listening field to deliver
exceptional sound from the TV's speakers. The feature uses stereo
signals from a TV broadcast or video input.
To activate the WOW feature:
1. Select Stereo mode (see “Selecting stereo/SAP broadcasts” on
page 26).
2. Press MENU, and then press x or • until the Sound menu
appears.
3. Press z, and then press y or z to highlight Audio Mode.
4. Press •, and then press y or z to select WOW.
9
CH RTN
C
Treble
Balance
0
On
Stable sound
100/
Off
WOW
CH
VOL
ENTER EXIT MENU
ENTER
VOL
yzx •
Selecting the audio mode
This function lets you enjoy the best sound without special
adjustment because the TV selects the appropriate sound option based
on the program content.
Press SOUND repeatedly to select the appropriate sound mode as
shown:
Memory
News
Theater
Sound Quality
WOW
Flat
Hall
see above
flat sound ( factory setting )
a concert hall filled with a rich warm sound
( factory setting )
a movie theater filled with a dynamic sound
( factory setting )
news/dialogue ( factory setting )
your personal preference
PICTURE
SLEEP
FAV. CH
MENU
SOUND
Note:
If you select one of the factory-set audio
modes ( WOW, Flat, Hall, Theater, or News )
,and then change a sound quality setting ( for
example, increase the bass ), the audio mode
automatically change to Memory mode.
Index
Appendix
News
Memory
SOUND
Hall
Mode
Theater
CC
Setting up
your TV
Flat
MENU
Using the TV’s
Features
WOW
EXIT
Using the
Remote Control
CH
WOW, SRS, and the
symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
27
#01E26-30_1520DL75
27
Black
(E) 1520DL75
2/7/05, 11:34 AM
Adjusting the sound quality
You can change the quality of your TV’s sound by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, and then press x or • until the Sound menu
appears.
2. Press z, and then press y or z to highlight the item you want to
adjust.
Note:
If you continue to adjust the other item, press
y or z in step 4.
MUTE
POWER
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
Sound
Bass
Treble
Balance
Stable sound
WOW
Treble
50
0
3. Press Enter.
4. Press x or • to adjust the level.
Treble
100/
CH
VOL
50
ENTER
VOL
yzx •
CH
• x makes the sound quality weaker or increases the balance in
the left channel, depending on the item selected.
• • makes the sound quality stronger or increases the balance in
the right channel, depending on the item selected.
Using the TV’s
Features
9
CH RTN
C
ENTER EXIT MENU
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
FAV. CH
Using the StableSound® feature
When the signal source is changed, the StableSound feature limits the
highest volume level to prevent extreme changes in volume (for
example, to prevent the sudden increase in volume that often happens
when a TV program switches to a commercial).
To turn on the StableSound feature:
1. Press MENU, and then press x or • until the Sound menu
appears.
2. Press z, and then press y or z to highlight Stable sound.
3. Press •, and then press y or z to Select On.
Sound
Bass
Treble
Balance
On
Stable sound
Off
WOW
ENTER EXIT MENU
To turn off the StableSound feature:
Select Off in step 3 above.
28
#01E26-30_1520DL75
28
Black
(E) 1520DL75
2/7/05, 11:35 AM
MENU
E
Using the PC setting feature
TV/VIDEO
VOLUME
S
CHANNEL
POWER
Introduction
You can adjust picture position, clock, phase, Auto configure, and
reset as you prefer.
1. Press TV/VIDEO repeatedly to select PC input mode. (See
“Selecting the video input source” in page 20.)
2. Press MENU, and then press x or • until the PC menu appears.
3. Press z, and then press y or z to select reguired item.
F
TV top panel
TV/VIDEO
PC
H-Position
V-Position
MUTE
POWER
Clock
H-Position
Reset
TV/VIDEO
MTS
RECALL
1
2
3
4
5
6
7
8
TV/VIDEO
76
ENTER EXIT MENU
4. Press Enter.
5. Press x or • to make appropriate adjustments.
• H-position/V-position
Adjusts picture left/right and up/down. The adjustment ranges
of H-Position is 0–100. (Based on the input mode, the
adjustable range may change.)
• Clock
Minimizes any vertical bars or stripes appearing on the screen
background. The adjustment ranges is 0–100. (Based on the
input mode, the adjustable range may change.)
9
CH RTN
C
0
100/
ENTER
CH
VOL
ENTER
Using the
Remote Control
Auto configure
Connecting
your TV
Phase
VOL
yzx •
CH
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
FAV. CH
MENU
Setting up
your TV
• Phase
Reduces (or Minimizes) any horizontal noise and clear up or
sharpen the character images. The range adjustment is 0–100.
(Based on the input mode, the adjustable range may change.)
Using the TV’s
Features
• Auto configure
Automatically adjusts the screen position, clock, and clock
phase. (The displayed image will disappear for a few seconds
while Auto-configu-ration is in progress.)
• Reset
Returns to the default settings programmed at the factory;
default settings cannot be changed.
Index
Appendix
6. Press ENTER to save.
29
#01E26-30_1520DL75
29
Black
(E) 1520DL75
2/7/05, 11:35 AM
Using the Auto off feature
With the Auto off feature On, the TV will automatically turn itself off
after approximately 15 minutes if it is tuned to a vacant channel or a
station that completes its broadcast for the day. This feature does not
work in the blue screen off mode.
To activate the Auto off:
1. Press MENU, and then press x or • until the Special menu
appears.
2. Press z, and then press y or z to highlight Auto off.
3. Press •, and then press y or z to Select On.
MUTE
TV/VIDEO
POWER
MTS
RECALL
RECALL
1
2
3
4
5
6
7
8
9
CH RTN
C
0
100/
CH
Special
Language
VOL
Caption/Text
Captions
On
Panel lock
ENTER
yzx •
CH
Off
V-Chip
Auto off
ENTER EXIT MENU
To deactivate the Auto off:
Select Off in step 3 above.
EXIT
MENU
CC
SOUND
PICTURE
SLEEP
FAV. CH
Displaying on-screen information
Press RECALL to display the following information on-screen:
• Channel number or Video mode selected
• Stereo or SAP audio status
TV
Using the TV’s
Features
VOL
6
Stereo
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns on the TV automatically when the power is
resupplied.
If the power is going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent the TV from
turning on in your absence.
30
#01E26-30_1520DL75
30
Black
(E) 1520DL75
2/7/05, 11:35 AM
MENU
E
F
Appendix
S
Introduction
Specifications
• This model complies with the specifications listed below.
• Designs and specifications are subject to change without notice.
WARNING: RISK OF ELECTRIC SHOCK !
Never attempt to service the TV yourself. Opening and removing the covers may expose you to
dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.
Power Source
120 V AC, 60 Hz
:
:
:
:
:
:
XX-X/X inches (XXX mm)
XX-XX/XX inches (XXX mm)
XX-XX/XX inches (XXX mm)
XX-X/X inches (XXX mm)
XX-XX/XX inches (XXX mm)
XX-XX/XX inches (XXX mm)
Connecting
your TV
Channel Coverage
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
15DL75: Width
Height
Depth
20DL75: Width
Height
Depth
Mass (weight)
15DL75: XX.X lbs (XX.X kg)
20DL75: XX.X lbs (XX.X kg)
Using the
Remote Control
Television System
NTSC standard
Operating condition
Temperature: 32°F – 95°F (0°C – 35°C)
Humidity: 20 – 80% (no moisture condensation)
Power Consumption
XXX W (average)
1.0 W below in standby mode
Setting up
your TV
Audio Power
5W+5W
Speaker Type
Two X-X/X × X-X/X inches (XX × XXX mm)
Appendix
Using the TV’s
Features
Video/Audio Terminals
S-VIDEO INPUT
Y : 1 V(p-p), 75 ohms, negative sync.
C : 0.286 V(p-p) (burst signal), 75 ohms
VIDEO/AUDIO INPUT
VIDEO: 1 V(p-p), 75 ohms, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent,
22k ohms or greater)
ColorStream® (Component video) INPUT
Y : 1V(p-p), 75 ohms
PR: 0.7 V(p-p), 75 ohms
PB : 0.7 V(p-p), 75 ohms
AUDIO: 150 mV(rms), 22k ohms or greater
AUDIO OUTPUT
150 mV(rms) (30% modulation equivalent,
2.2k ohms or less)
HEADPHONE jack
3.5 mm stereo
PC INPUT
15-pin D-sub Analog RGB
PC AUDIO INPUT
3.5 mm stereo mini jack
Index
Dimensions (Including TV stand)
31
#01E31-34_1520DL75
31
Black
(E) 1520DL75
2/7/05, 11:35 AM
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptom and
some solutions.
Solution
• Make sure the power cord is plugged in, then press POWER.
• Make sure the appropriate device mode on the remote control is
selected.
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound
• Check the antenna/cable connections.
No sound, picture OK
• The sound may be muted. Press VOLUME.
• The station may have broadcast difficulties. Try another channel.
Poor picture, sound OK
• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the Picture menu.
Poor reception of broadcast channels
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
Black box appears on the screen
• The closed caption feature may be set to one of the Text modes
(Text1, Text2, Text3, or Text4). Turn closed captioning Off.
Unable to select a certain channel
• The channel may be erased with the Manual programming feature.
Multiple images
• The station may have broadcast difficulties. Try another channel.
• Antenna reception may be poor. Use a highly directional outdoor
antenna.
Poor color or no color
• The station may have broadcast difficulties. Try another channel.
• Adjust the Tint and/or Color in the Picture menu.
No stereo or SAP sound from a
known MTS broadcast
• Make sure the MTS feature is set properly.
The top panel buttons do not operate
• Check the Panel lock feature.
The remote control does not operate
• Make sure the appropriate device mode is selected.
• Remove all obstructions between the remote control and the remote
control sensor in the TV.
• The remote control batteries may be dead. Replace the batteries.
Appendix
Symptom
TV will not turn on
32
#01E31-34_1520DL75
32
Black
(E) 1520DL75
2/7/05, 11:36 AM
E
Limited United States Warranty for LCD TV
F
LCD Television Models Smaller than 26”
S
Connecting
your TV
Introduction
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service
is needed:
(1) To find the nearest TACP Authorized Service Station,
visit TACP’s web site at www.toshiba.com/tacp or call toll
free 1-800-631-3811.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Station. You must deliver the entire
television to an Authorized TACP Service Station. You must
pay for all transportation and insurance charges for the
television to and from the Service Station.
For additional information, visit TACP’s web site:
www.toshiba.com/tacp
Using the TV’s
Features
Setting up
your TV
Using the
Remote Control
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF
THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF
ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS,
AND SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO
THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO
EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
LOST PROFITS, BUSINESS INTERRUPTION, OR
MODIFICATION OR ERASURE OF RECORDED DATA)
CAUSED BY USE, MISUSE OR INABILITY TO USE THIS
PRODUCT.
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which action must be
commenced to enforce any obligation of TACP arising under this
warranty or under any law of the United States or of any state
thereof is hereby limited to 90 days from the date you discover,
or should have discovered, the defect. This limitation does not
apply to implied warranties arising under the law of any state of
the U.S.A.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY
FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE
U.S.A. DO NOT ALLOW LIMITATIONS ON THE DURATION OF
AN IMPLIED WARRANTY, LIMITATIONS ON THE TIME
WITHIN WHICH AN ACTION MAY BE BROUGHT, OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU
UNDER SUCH CIRCUMSTANCES.
Appendix
04/04
Index
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the
following limited warranties to original consumers in the United
States. THESE LIMITED WARRANTIES EXTEND TO THE
ORIGINAL CONSUMER PURCHASER OR ANY PERSON
RECEIVING THIS LCD TV AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER PURCHASER
OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1)Year Warranty on Parts and Labor*
TACP warrants this LCD TV and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TACP
WILL, AT TACP’S OPTION, REPAIR OR REPLACE A DEFECTIVE
PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR PARTS OR LABOR. YOU MUST
DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TACP
SERVICE STATION. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES FOR THE
TELEVISION TO AND FROM THE SERVICE STATION.
Rental Units
The warranty for rental units begins with the date of first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
*Commercial Units
LCD TVs sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts and labor.
Owner ’s Manual and Product Registration Card
Read this owner ’s manual thoroughly before operating this LCD
TV. If you purchased your LCD TV in the U.S.A. or Puerto Rico,
complete and mail the enclosed product registration card, or
register your product online at www.tacp.toshiba.com/
service as soon as possible. By registering your product you will
enable TACP to bring you new products specifically designed to
meet your needs and help us contact you in the unlikely event a
safety notification is required under the Consumer Product Safety
Act. Failure to complete and return the product
registration card or to register online does not diminish
your warranty rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this LCD TV must be made by an
Authorized TACP Service Station.
(3) The warranties from TACP are effective only if the LCD TV is
purchased and operated in the U.S.A. or Puerto Rico.
(4) Labor charges for installation, setup, adjustment of customer
controls, and installation or repair of antenna systems are not
covered by these warranties. Reception problems caused by
inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not extend to any
LCD TV or parts that have been lost or discarded by you or
to damage to the LCD TV or parts caused by fires misuse,
accident, Acts of God (such as lightning or fluctuations in
electric power), improper installation, improper maintenance,
use in violation of instructions furnished by TACP, or misuse
or to use or malfunction through simultaneous use of this
product and connected equipment; units that have been
modified or had the serial number removed, altered, defaced,
or rendered illegible.
33
#01E31-34_1520DL75
33
Black
(E) 1520DL75
2/7/05, 11:36 AM
Limited Canada Warranty for LCD TV
Toshiba of Canada Limited (“TCL”) makes the following limited
warranties to original consumers in Canada.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL
CONSUMER PURCHASER OR ANY PERSON RECEIVING
THIS LCD TV AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Labor*
TCL warrants this LCD TV and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TCL
WILL, AT TCL ’S OPTION, REPAIR OR REPLACE A DEFECTIVE
PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR PARTS OR LABOR. YOU MUST
DELIVER THE ENTIRE LCD TELEVISION TO AN AUTHORIZED
TCL SERVICE DEPOT. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES FOR THE
LCD TELEVISION TO AND FROM THE SERVICE DEPOT.
Limited One (1) Year Warranty on Parts*
TCL further warrants the parts in this LCD TV against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TCL
WILL, AT TCL'S OPTION, REPAIR OR REPLACE A DEFECTIVE
PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR THE PART, PROVIDED THAT IF A
DEFECTIVE PART IS REPAIRED OR REPLACED AFTER NINETY
(90) DAYS FROM THE DATE OF ORIGINAL RETAIL
PURCHASE, YOU MUST PAY ALL LABOR CHARGES
INVOLVED IN THE REPAIR OR REPLACEMENT. YOU MUST
DELIVER THE ENTIRE LCD TELEVISION TO AN AUTHORIZED
TCL SERVICE DEPOT. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES FOR THE
LCD TELEVISION TO AND FROM THE SERVICE DEPOT.
Rental Units
The warranty for rental units begins with the date of first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
*Commercial Units
LCD TVs sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts, labor.
Appendix
Owner's Manual
Read this owner's manual thoroughly before operating this LCD
TV.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(5) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to any LCD
TV or parts that have been lost or discarded by you or to
damage to the LCD TV or parts caused by misuse, accident,
Acts of God (such as lightning or fluctuations in electric
power), improper installation, improper maintenance, or use
in violation of instructions furnished by TCL; or to units that
have been modified or had the serial number removed,
altered, defaced, or rendered illegible.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service
is needed:
(1) To find the nearest TCL Authorized Service Depot, visit
TCL ’s web site at www.toshiba.ca.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Depot. You must deliver the entire LCD
television to an Authorized TCL Service Depot. You must pay
for all transportation and insurance charge for the LCD
television to and from the Service Depot.
For additional information, visit TCL’s web site:
www.toshiba.ca
ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE
OF CANADA, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF
ANY PROVINCE OF CANADA AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS,
AND SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE
REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT
SHALL TCL BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES.
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which action must be
commenced to enforce any obligation of TCL arising under this
warranty or under any law of Canada or of any province thereof
is hereby limited to 90 days from the date you discover, or should
have discovered, the defect. This limitation does not apply to
implied warranties arising under the law of any province of
Canada.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY
FROM PROVINCE TO PROVINCE IN CANADA. SOME
PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON
THE DURATION OF AN IMPLIED WARRANTY, LIMITATIONS
ON THE TIME WITHIN WHICH AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES; THEREFORE,
THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY
TO YOU UNDER SUCH CIRCUMSTANCES.
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this LCD TV must be made by an
Authorized TCL Service Depot.
(3) The warranties from TCL are effective only if the LCD TV is
purchased in Canada from an authorized TCL dealer and
operated in Canada.
(4) Labor service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
systems are not covered by these warranties. Reception
problems caused by inadequate antenna systems are your
responsibility.
Rev. MAR 02
34
#01E31-34_1520DL75
34
Black
(E) 1520DL75
2/7/05, 11:36 AM
E
F
Index
AB
S
Antenna cables .................................................................... 10
Audio mode selection ........................................................31
Audio system connection ................................................. 14
Auto off ....................................................................................30
A/V cables .............................................................................. 10
Back of the TV ........................................................................ 8
S-video cables ...................................................................... 10
SAP sound .............................................................................. 26
Set-top box ............................................................................ 13
Sleep timer ............................................................................. 25
Sound quality adjustments .............................................. 28
Specifications ........................................................................31
Stable sound ......................................................................... 28
Stereo sound ......................................................................... 26
DE
DTV receiver connection .................................................. 13
DVD connection ................................................................... 12
T
Troubleshooting ................................................................... 32
TV/VIDEO button ................................................................. 20
Connecting
your TV
Cable converter box connection ................................... 14
Camcorder connection ...................................................... 14
CH yz buttons .................................................................... 18
CH RTN button ..................................................................... 20
Channel Number buttons ................................................ 20
Channel programming
Automatic programming ............................................. 18
Memory/ERASE .............................................................. 19
Closed caption ...................................................................... 25
Component video cables .................................................. 10
V
V-Chip
Age block ........................................................................... 22
Aux block ........................................................................... 22
Content block ................................................................... 22
MPAA ..................................................................................22
Password ............................................................................ 22
VCR connection ........................................................... 11–13
FGHIK
W
FAV. CH button ..................................................................... 19
Favorite channels ................................................................ 19
Front of the TV ........................................................................ 8
Warranty .......................................................................... 33, 34
WOW surround ..................................................................... 27
Using the
Remote Control
C
Introduction
S
LM
Setting up
your TV
Language selection ............................................................ 18
Last mode memory .............................................................30
Menu system ......................................................................... 17
MTS ...........................................................................................26
MUTE button ......................................................................... 26
OPQ
Using the TV’s
Features
Panel lock ............................................................................... 25
PC connection ...................................................................... 15
PC setting ............................................................................... 29
Picture adjustments
Picture mode .................................................................... 23
Picture quality .................................................................. 23
R
Index
Appendix
RECALL button ....................................................................30
Remote control
Battery installation ......................................................... 16
Learning about the buttons ........................................ 16
35
#01E35_1520DL75
35
Black
(E) 1520DL75
2/7/05, 11:36 AM
HEAD OFFICE:82 TOTOWA ROAD, WAYNE, NEW JERSEY 07470, U.S.A.
NATIONAL SERVICE DIVISION:1420B TOSHIBA DRIVE, LEBANON, TN. 37087, U.S.A.
HEAD OFFICE/191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470-5400
SERVICE CENTERS:
TORONTO: 191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470-5400
MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J-4A1, CANADA TEL:(514)390-7766
VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C. V6W 1J5, CANADA TEL: (604) 303-2500
ColorStream and StableSound are registered trademarks of Toshiba America Consumer Products, L.L.C.
#01E36_1520DL75
36
Black
(E) 1520DL75
2/7/05, 11:36 AM

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project