Toshiba DVR620 DVD VCR Combo User Manual

Introduction
Connections
DVR670KU
Disc
Management
OWNER’S MANUAL
Basic Setup
TOSHIBA DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER
DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER
Recording
DVR670KU
Playback
Editing
Function Setup
© 2009 Toshiba Corporation
Others
E9SK0UD_DVR670KU_cover.indd 2-3
1VMN26856 / E9SK0UD
VCR Function
Printed in China
Owner’s Record
The model number and serial number are on the back
of your DVD Recorder. Record these numbers in the spaces
below. Refer to these numbers whenever you
communicate with your Toshiba dealer about this DVD
Recorder.
Model number:
Serial number:
2009/04/03 16:23:49
PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The important note is located on the rear or bottom of
the cabinet.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacture’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Instructions
15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
16. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and
serious damage to the apparatus.
19. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal
injury and apparatus malfunction.
20. If the apparatus should smoke or smell, immediately disconnect the power cord from the wall outlet. Wait until the
smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
21. While it is thundering, do not touch the connecting cables or the apparatus.
22. Warning: To prevent the spread of fire, keep candles or other open flames away from this product at all times.
2
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 2
2009/04/03 15:36:06
Introduction
PRECAUTIONS
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized change or modification is made.
Connections
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Basic Setup
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Disc
Management
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
Recording
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
Playback
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Editing
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
To Avoid the Hazards of Electrical Shock and Fire
Function Setup
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
VCR Function
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 3
3
2009/04/03 15:36:07
PRECAUTIONS
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) DVD player, please contact Toshiba Customer Service.
Installation Location
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields.
Supplied Accessories
remote control with
batteries (AAx2)
RF coaxial cable
RCA audio/video cables
owner’s manual
Avoid the Hazards of Electrical Shock and Fire
OWNER’S MANUAL
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
About Copyright
The unauthorized recording, use, distribution, or revision
of television programs, videotapes, DVDs and other
materials, is prohibited under the copyright laws of the
United States and other countries, and may subject you
to civil and/or criminal liability.
quick setup guide
return stop sheet
Note to CATV system installer
This reminder is provided to call the cable TV system
installer’s attention to Article 820-40 of the National
Electrical Code, which provides guidelines for proper
grounding - in particular, specifying that the cable
ground shall be connected to the grounding system of
the building, as close to the point of cable entry as
possible.
4
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 4
2009/04/03 15:36:07
Maintenance
Servicing
Cleaning Discs
Cleaning the Disc Lens
Disc Handling
Auto Head Cleaning
Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending.
DTS and DTS Digital Out are registered
trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc.
©1996-2008 DTS, Inc. All Rights Reserved.
HDMI, the HDMI logo and HighDefinition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC.
Function Setup
DivX, DivX Certified, and associated logos
are trademarks of DivX, Inc. and are used
under license.
VCR Function
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accumulated
on the video heads after a long period of use, or the
usage of rental or worn tapes can cause this problem. If
a streaky or snowy picture appears during playback, the
video heads in your unit may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a
good quality VHS video head cleaner.
2. If a video head cleaner does not solve the problem,
please consult your dealer or an Authorized Service
Center.
“Dolby® Digital Recording enables consumers to record
high-quality video with stereo sound on recordable DVD
discs. The technology, when utilized instead of PCM
recording, also saves recordable disc space, allowing for
higher video resolution or extended recording time on
each DVD. DVDs created using Dolby Digital Recording
will play back on all DVD-video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.
Editing
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
Dolby Digital Recording
Playback
• If this unit still does not perform properly although you
refer to the relevant sections and to
“TROUBLESHOOTING” in this owner’s manual, the laser
optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
Recording
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Disc
Management
• Wipe the front panel and other exterior surfaces of the
unit with a soft, slightly damp cloth.
• Never use a solvent, thinner, benzene or alcohol to
clean the unit. Do not spray insecticide liquid near the
unit. Such chemicals may discolor the surface or
damage the unit.
Basic Setup
Cleaning the Cabinet
If the remote control does not work properly, you can test if
the remote control sends out the infrared signal with AM
radio or a digital camera (including built-in camera of cellular
phone). It will help to define the cause of malfunction.
• With an AM radio:
Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will be
fluttering when you press any key and the
radio receives the signal. This means the
remote control is working.
• With a digital camera (including built-in camera of
cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control. If
infrared light appears through digital camera,
the remote control is working.
Connections
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 114-117 before returning the product.
• If you need to call a customer service representative,
please know the model number and serial number of
your product before you call. This information is
displayed on the back of the product. Also, please take
a moment to identify the problem you are having, and
be prepared to explain this to the representative. If you
believe the representative will need to help you with
operations, please stay near the product. Our
representatives will be happy to assist you.
IR Signal Check
Introduction
PRECAUTIONS
“WMA” (Windows Media Audio) is a new audio codec
developed by Microsoft® in the United States of America.
Note
Others
• Remember to read the instructions along with the
video head cleaner before use.
• Clean video heads only when problems occur.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 5
5
2009/04/03 15:36:08
CONTENTS
Introduction
Disc Management
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .8
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the Batteries in the Remote Control . . . . . . 12
Using a Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
THE VCR / DVD RECORDER SWITCHING . . . . . . . . . . . 14
GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . 15
On-Screen Display / Menu . . . . . . . . . . . . . . . . . . . . . . . . . 15
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
FRONT PANEL DISPLAY GUIDE . . . . . . . . . . . . . . . . . . . 18
FORMATTING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Choosing the Recording Format of a Brand-New
DVD-RW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reformatting a Disc Manually . . . . . . . . . . . . . . . . . . . . .
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . .
PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . .
Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connections
CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna Connection (Required) . . . . . . . . . . . . . . . . . . .
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to a TV Using Audio / Video Out Jacks .
Connecting to a TV Using the S-Video Out Jack . . . .
Connecting to a TV Using Component
Video Out Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to a TV with an HDMI™
Compatible Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to a Cable / Satellite Box . . . . . . . . . . . . . .
Connecting to a TV without Audio / Video Jacks . . .
Digital Audio Connection. . . . . . . . . . . . . . . . . . . . . . . . . .
19
19
19
20
21
21
22
23
24
24
Basic Setup
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHANNEL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding/Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . .
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching Analog Mode / Digital Mode . . . . . . . . . . . .
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
26
27
27
28
30
30
32
32
33
33
33
34
36
37
39
39
40
41
42
42
43
Recording
INFORMATION ON DVD RECORDING . . . . . . . . . . . . .
Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restrictions on Recording . . . . . . . . . . . . . . . . . . . . . . . . .
SETTINGS FOR A RECORDING . . . . . . . . . . . . . . . . . . . .
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . .
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording the DTV Closed Caption . . . . . . . . . . . . . . . .
Recording Audio Select (XP) . . . . . . . . . . . . . . . . . . . . . . .
Setting Aspect Ratio for Video Mode Recording . . . .
BASIC RECORDING & ONE-TOUCH TIMER
RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . .
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . .
Connection to an External Device. . . . . . . . . . . . . . . . . .
Recording from an External Device . . . . . . . . . . . . . . . .
DV DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guide to DV and On-Screen Display . . . . . . . . . . . . . . .
DVC to DVD Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVC to VCR Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45
45
45
46
46
46
46
47
47
48
50
54
55
55
56
57
57
58
59
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 6
2009/04/03 15:36:10
Introduction
CONTENTS
81
81
81
82
84
84
85
86
86
88
89
90
92
93
94
95
Disc
Management
INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . .
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DELETING TITLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CREATING/DELETING PLAYLIST . . . . . . . . . . . . . . . . . .
Adding Titles to a Playlist. . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing All Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a Part of a Title . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Combining Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting or Releasing the Title Protection . . . . . . . . . . .
Setting or Clearing All Chapter Marks at Once. . . . . .
Basic Setup
Editing
DVD/VCR DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 62
Structure of Disc Contents. . . . . . . . . . . . . . . . . . . . . . . . . 62
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 64
Playing Back an Audio CD and a CD-RW/-R with MP3/
WMA/JPEG Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Playing Back a DivX® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Using the Title/Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . 68
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 69
Skipping TV Commercials During Playback. . . . . . . . . 69
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 70
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Chasing Playback during Recording . . . . . . . . . . . . . . . 72
Simultaneous Playback and Recording. . . . . . . . . . . . . 73
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Title/Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
REPEAT/RANDOM/PROGRAM PLAYBACK/
SLIDE SHOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
SELECTING THE FORMAT OF AUDIO AND VIDEO . . 78
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 78
Switching Virtual Surround System . . . . . . . . . . . . . . . . 79
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 79
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Adjusting Black Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Connections
Playback
Recording
Function Setup
Playback
LIST OF THE DEFAULT SETTINGS . . . . . . . . . . . . . . . . . 96
GENERAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
DivX® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
VCR Function
Editing
VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Information on VCR Functions . . . . . . . . . . . . . . . . . . . . 111
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . 112
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Function Setup
Others
VCR Function
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . 117
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 7
7
2009/04/03 15:36:10
FEATURES
This unit not only plays back DVD, CD and cassette tape but also offers features for you to record on DVD/cassette tape and
edit them after that. The following features are offered with this unit.
Recording
Editing
DVD mode VCR mode
This unit is compatible with recording on DVD-RW/+RW
which is recordable repeatedly and DVD-R/+R which accept
the additional recordings until the disc becomes full but
not overwritable. Also, this unit allows you to record to the
cassette tape.
Up to 12 program recording:
You can program the unit to record up to 12 programs,
within a month in advance. Daily or weekly program
recordings are also available.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every time
[REC I] is pressed during recording, the recording time will
be increased by 30 minutes up to 8 hours. The recording
automatically stops when the recording time you set is
reached.
Dubbing mode:
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the DVD
or a cassette tape is not copy protected. You cannot record
on a cassette tape when its erase-protection tab is removed.
DV dubbing:
This function helps you to easily dub the contents of the DVC
(digital video camcorder) to DVD and VCR.
Left channel stereo recording:
This unit can record the sound of the left channel monaural
input as left and right channels automatically.
DVD mode
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Automatic title menu making:
The unit creates title menu automatically when finalizing discs.
Automatic playlist making:
The unit creates a playlist automatically after recording VR
mode DVD-RW.
Automatic title finalizing:
For video mode DVD-RW/-R and DVD+R recording, you can
finalize discs automatically after finishing all timer recordings
or at the end of the disc space if you set this in the main menu.
Playback
DVD mode
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital or DTS, you can experience the
theater surround sound from discs with surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by title,
chapter/track or time.
Virtual surround system:
You can enjoy stereophonic space through your existing 2
channel stereo system.
Playing back MP3/WMA/JPEG/DivX® files:
You can enjoy MP3/WMA/JPEG/DivX® files which are
recorded on CD-RW/-R.
DivX® files can also be recorded on DVD-RW/-R and DVD+RW/+R.
VCR mode
Quick search for what you want to watch:
You can go to a specific point on a cassette tape by entering
the exact amount of time you wish to skip.
You can easily find the part you want to watch using the index
search/time search functions. An index mark will be assigned
at the beginning of each recording you make. For time search
function, you can go to a specific point on a cassette tape by
entering the exact amount of time you wish to skip.
8
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 8
DVD mode
Deleting titles:
You can delete titles which you do not need anymore.
Setting or clearing chapter marks:
You can set or clear chapter marks on titles.
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Deleting parts of titles:
You can delete a specific part of a title.
Dividing or combining titles:
You can divide or combine a title.
Editing title names:
You can change the title name you prefer.
Compatibility
DVD mode
Available for playing back discs on a regular DVD player:
Recorded discs can be played back on regular DVD players,
including computer DVD drives compatible with DVD-video
playback. Although DVD+RW/+R are playable on other units
without finalization in most cases, it is recommended to
finalize in order to stabilize the performance.
Others
DVD mode VCR mode
Progressive scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher
resolution than that of traditional television signals.
HDMI (High-Definition Multimedia Interface)
You can enjoy clearer audio/video output when connecting
this unit to a display device with an HDMI-compatible port.
Symbols Used in this Owner’s Manual
To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.
Symbol Description
For Recording, Playing Back, and Editing
Description refers to DVD-RW in video mode
Description refers to DVD-RW in VR mode
Description refers to DVD-R in video mode
Description refers to DVD+RW
Description refers to DVD+R
Description refers to VHS tapes
Use only cassettes marked VHS (
).
For Playback only
Description refers to DVD-video
Description refers to audio CD
Description refers to CD-RW/-R with MP3 files
Description refers to CD-RW/-R with WMA files
Description refers to CD-RW/-R with JPEG files
Description refers to DVD-RW/-R, DVD+RW/+R
and CD-RW/-R with DivX® files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
2009/04/03 15:36:10
Introduction
FEATURES
Discs for Recording, Playing back
Disc type
DVD-RW
DVD-R
DVD+RW
DVD+R
Format
Can be formatted in VR or video
mode
Video Mode
Automatically
formatted in
video mode
Automatically
formatted in
+VR mode
Automatically
formatted in
+VR mode
480 min (12cm)
144 min (8cm)
480 min (12cm)
144 min (8cm)
480 min (12cm)
144 min (8cm)
1×-16×
Ver.2.0/2.1
1×-4×
1×-16×
Playable on
DVD+RW
compatible
players.
Finalization
recommended.
(title menu will
be created)
Playable on
most DVD
players.
Finalization
recommended.
(title menu will
be created)
Connections
Logo
VR Mode
Maximum record 480 min (12cm)
time 144 min (8cm)
480 min (12cm)
144 min (8cm)
Playable on
Playable only
most DVD
on VR mode
players.
compatible unit. Finalization
Finalization
necessary.
recommended. (title menu will
be created)
Recording
Playable on
most DVD
players.
Compatibility Finalization
necessary.
(title menu will
be created)
Disc
Management
1×-6×
Disc Speed
Ver.1.1/1.2
Versions
Ver.1.1/1.2 CPRM compatible
Basic Setup
Icon
Record TV
programs
✓
✓
Reuse by deleting
the current
contents
✓
✓
Record 16:9 size
pictures
✓
✓
Record copy-once
programs
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Playlist Original
Scene delete
✓
✓
✓
✓
✓
Divide a title
✓
Combine titles
✓
✓
✓
✓
Create a
playlist
✓
Protect a title
✓
✓
✓
✓
✓
✓
VCR Function
Hide chapters
✓
Function Setup
✓
✓
Create chapters
wherever you like
(chapter mark)
Delete a title
✓
✓*
Editing Features
Edit title name
✓
Editing
Create chapters
at fixed intervals
(auto chapter)
✓
Playback
Available Features
Recording Features
Others
✓: Available
Gray: Not available
*CPRM compatible disc only.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 9
9
2009/04/03 15:36:11
FEATURES
Discs for playing back
Disc Type
DVD-VIDEO
CD-DA
CD-RW
CD-R
Logo
Icon
Files for playing back
Type of title
Recording/Playing back
MP3
WMA
JPEG
DivX®
VCR
CD-RW/-R
CD-RW/-R
CD-RW/-R
CD-RW/-R
DVD-RW/-R
DVD+RW/+R
Cassette Tape
Icon
Media
is a trademark of DVD Format/Logo Licensing Corporation.
• Official DivX® Certified product
• Plays all versions of DivX® video (including DivX® 6) with
standard playback of DivX® media files
• Discs containing the DivX® files with the DivX® GMC (Global
Motion Compensation) playback feature, which is DivX®
supplemental function, cannot be played back on this unit.
* This unit cannot play back the disc contents protected
by Windows Media Digital Rights Management (DRM).
Unplayable Discs
The following discs will not play back on this unit.
• CD-ROM
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD) • DVD-ROM
• DVD-audio
• Unfinalized disc
• DVD-RW/-R recorded in non compatible recording format
• Blu-ray Disc
• HD DVD
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.
Color Systems
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.
Region Codes
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
10
Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition, the unit
may not read the disc properly.
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x
JVC
DVD-RW 4x
Maxell
DVD+R 4x/8x/16x, DVD-R 8x/16x
SONY
DVD+R 4x/8x/16x, DVD+RW 4x
TDK
DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.
• Toshiba is not liable for any damage or loss caused directly
or indirectly by the malfunction of this recorder, including,
without limitation, any one of the following:
• Failure to record contents intended to be recorded by
the consumer.
• Failure to edit contents as intended by the consumer.
• When a DVD-RW/-R, DVD+RW/+R disc created on this
recorder is used (e.g., insertion, playback, recording or
editing) in another DVD player, recorder or personal
computer drive.
• When a DVD-RW/-R, DVD+RW/+R disc that is used in
the manner described in the immediately preceding
bullet point is used again in this recorder.
• When a DVD-RW/-R, DVD+RW/+R disc that was
recorded in another DVD recorder, or in a personal
computer drive is used in this recorder.
• Some functions may not work with personal computer
discs.
• Discs recorded in this recorder may not operate as
expected on other DVD players, recorders or personal
computer drives.
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture
of DVD and CD discs, Toshiba cannot assure that this DVD
Video Recorder will successfully play every disc bearing the
DVD and CD logos. If you happen to experience any
difficulty playing a DVD and/or CD disc on this DVD Video
Recorder, please contact Toshiba Customer Service.
DVD players with
recorded in VR mode.
are capable of playing DVD-RW
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 10
2009/04/03 15:36:13
Introduction
FUNCTIONAL OVERVIEW
Front Panel
1
2
3*
4
5 6
7
DVR670
21 20 19 18 17 16 15
13 12 1110 9* 8
Playback
2
3
4
Note
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 11
Others
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
Caution on using S-video, component, or HDMI
connection for VCR:
• Only the playback audio / video is available with
these connections.
VCR Function
10. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video inputs
with a component video cable.
11. S-VIDEO OUT jack
• Use to connect the S-video input of a TV monitor, AV receiver
or other device with an S-video cable.
12. AUDIO OUT jacks
• Use to connect a TV monitor, AV receiver or other device
with an RCA audio cable.
13. COAXIAL DIGITAL AUDIO OUT jack
• Use to connect an AV receiver, Dolby Digital decoder or
other device with a coaxial digital input jack with a digital
coaxial cable.
Function Setup
1. AC Power Cord
• Connect to a standard AC outlet to supply power to this unit.
• Unplug this cord from the AC outlet to completely shut down
the unit.
2. HDMI OUT jack
• Use an HDMI cable to connect to a display with an HDMI
compatible port.
3. ANTENNA OUT jack
• Use to connect an RF coaxial cable to pass the signal from
the ANTENNA IN to your TV.
4. ANTENNA IN jack
• Use to connect an antenna.
5. AUDIO OUT jacks
• Use to connect a TV monitor, AV receiver or other device
with an RCA audio cable.
6. VIDEO OUT jack
• Use to connect a TV monitor, AV receiver or other device
with an RCA video cable.
7. VIDEO IN jack (L1)
• Use to connect external device with an RCA video cable.
8. AUDIO IN jacks (L1)
• Use to connect external device with an RCA audio cable.
9. S-VIDEO IN jack (L1)
• Use to connect the S-video output of external device with
an S-video cable.
Editing
13 12 11 10 9 8 7 6 5
Recording
Rear Panel
1
Disc
Management
13. DUBBING button
• Press to start VCR to DVD (DVD to VCR) duplication which
you set in the main menu.
/
buttons
14. CHANNEL
• Press to change the channel up and down.
15. Display
• Refer to “FRONT PANEL DISPLAY GUIDE” on page 18.
16. Infrared sensor window
• Receive signals from your remote control so that you can
control the unit from a distance.
17. I REC button (VCR)
• Press once to start a recording. Press repeatedly to start the
one-touch timer recording.
18. PLAY B button (VCR)
• Press to start playback.
19. EJECT/STOP A/ C button (VCR)
• When the unit is in stop mode, press to remove the cassette
tape from the cassette compartment.
• Press to stop cassette tape playback or recording.
• Press to stop the proceeding timer recording in VCR.
20. FWD D button (VCR)
• Press to rapidly advance the cassette tape, or view the
picture rapidly in forward during playback (forward search).
21. REW E button (VCR)
• Press to rewind the cassette tape, or to view the picture
rapidly in reverse during playback (rewind search).
22. Power indicator
• This indicator lights up in green when the unit is active and
turns off when the unit is in standby mode.
Basic Setup
1. I/y ON/STANDBY button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit, you
must unplug the AC power cord.)
2. Cassette compartment (VCR)
• Insert a cassette tape here.
3. A OPEN/CLOSE button (DVD)*
• Press to open or close the disc tray.
4. Disc tray (DVD)
• Place a disc when it is open.
5. VIDEO input jack (L2)
• Use to connect external device with an RCA video cable.
6. AUDIO input jacks (L2)
• Use to connect external device with an RCA audio cable.
7. DV input jack (L3)
• Use to connect the DV output of external device with a DV
cable.
8. I REC button (DVD)
• Press once to start a recording.
• Press repeatedly to start the one-touch timer recording.
9. PLAY B button (DVD)*
• Press to start or resume playback.
10. STOP C button (DVD)
• Press to stop playback or recording.
• Press to stop the proceeding timer recording in DVD.
11. VCR/DVD indicator
• Lights up when the VCR/DVD output mode is selected.
12. SELECT button
• Press to select the component you wish to operate.
14
Connections
22
(*) The unit can also be
turned on by pressing
these buttons or by
inserting a cassette tape.
11
2009/04/03 15:36:16
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote
Control
Install the batteries (AAx2) matching the polarity
indicated inside battery compartment of the remote
control.
1
Open the cover.
2
Insert batteries.
Using a Remote Control
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
approx. 23 feet (7m) within 30°
DVR670
30˚
23feet (7m)
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
3
30˚
23feet (7m)
23feet (7m)
18
1
Close the cover.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
19
2
CH
TIMER
PROG.
SPACE
4
21
DTV/TV
6
SETUP
DISPLAY
AUDIO
5
22
DISC MENU
TOP MENU
7
Caution:
• Be sure to use AA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if
the operating range becomes reduced, replace
batteries with new ones.
• When necessary to replace batteries in the remote
control, always replace both batteries with new ones.
Never mix battery types or use new and used
batteries in combination.
• Always remove batteries from remote control if they
are dead or if the remote control is not to be used for
an extended period of time. This will prevent battery
acid from leaking into the battery compartment.
ENTER
CLEAR
Note:
23
24
8
Never throw batteries into a fire.
12
20
3
25
RETURN
9
26
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
27
10
12
REV
FWD
PLAY
11
SKIP
STOP
SKIP
13
30
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
14
32
15
34
REPEAT TIMER SET SEARCH
17
28
29
16
ZOOM
31
33
35
36
37
SE-R0294
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 12
2009/04/03 15:36:18
Introduction
FUNCTIONAL OVERVIEW
Remote Control
Using a Remote Control (cont’d)
Disc
Management
Recording
Playback
Editing
Function Setup
VCR Function
Note
• If you turn off this unit, [OPEN/CLOSE A] on the remote
control is not available.
Be sure to use [AOPEN/CLOSE] or [EJECT/STOP A / C]
on the unit.
EN
Others
E9SK0UD_DVR670KU_EN_v1.1.indd 13
18. HDMI button (DVD)
• Press to set the HDMI video resolution.
19. I/y ON/STANDBY button
• Press to turn on the unit, or to turn the unit into the standby
mode. (To completely shut down the unit, you must unplug the
AC power cord).
/
buttons
20. CH
DVD mode:
• Press to change the channel up and down.
VCR mode:
• Press to change the channel up and down.
• Press to adjust the tracking during playback or in slow motion
of the cassette tape.
• While playback is in still mode, you can stabilize the picture.
21. TIMER PROG. button
• Press to display the timer programming list.
button
22. AUDIO
DVD mode:
• During playback, press to display the audio menu.
VCR mode:
• During the playing of a HiFi video tape, press to change the
audio out setting to HiFi or mono.
23. DISPLAY button
• Press to display the display menu on or off.
24. TOP MENU button (DVD)
• Press to display the title list.
25. ENTER button
• Press to confirm or select menu items.
26. RETURN button
• Press to return to the previous displayed menu screen.
27. TIME SLIP button (DVD)
• Press once to start recording the TV program you are watching.
Press again to watch the content being recorded from the
beginning while recording continues. (VR mode DVD-RW with
the recording mode of LP, EP or SLP only)
28. 1.3x/0.8x PLAY button (DVD)
• During playback, press to play back in a slightly faster/slower
speed while keeping the sound output.
29. FWD D button
DVD mode:
• During playback, press to fast forward playback.
• When playback is in pause, press to slow forward playback.
VCR mode:
• During playback, press to view the picture rapidly in forward.
• Press to fast forward the cassette tape in stop mode.
• When playback is paused, press to view the cassette tape in
slow motion.
30. SKIP G button (DVD)
• During playback, press to skip to the next chapter, track or file.
• When playback is in pause, press repeatedly to forward the
playback step by step.
31. STOP C button
• Press to stop playback or recording.
DVD mode:
• Press to exit from the title list.
32. DVD button
• Press to select the DVD output mode.
33. VCR button
• Press to select the VCR output mode.
34. REC I button
• Press once to start a recording.
• Press repeatedly to start the one-touch timer recording.
35. REC MODE button
• Press to switch the recording mode.
36. ZOOM button (DVD)
• During playback, press to enlarge the picture on the TV screen.
37. SEARCH button (VCR)
• Press to call up the index or time search menu.
Basic Setup
1. INPUT SELECT
button
• Press to select the appropriate input.
2. OPEN/CLOSE A button
DVD mode:
• Press to open or close the disc tray.
VCR mode:
• Press to remove the cassette tape from the cassette
compartment.
3. Number/Character buttons
• Press to enter values for the settings in the main menu.
• Press to select channel numbers.
DVD mode:
• Press to select a title/chapter/track/file on display.
• Press to enter title names.
VCR mode:
• Press to start the index/time search.
4. Confirm ( − ) button
Analog mode:
• Press to confirm the channel selection made by
[the Number buttons].
Digital mode:
• Press to confirm the major / minor channel selection made by
[the Number buttons].
5. DTV/TV button
• Press to switch between digital TV (DTV) mode and analog TV
(TV) mode.
6. SETUP button
• Press to display the main menu.
• During DVD playback, press and hold for more than 3 seconds
to switch the progressive scanning mode to the interlace mode.
(Though appears, the output mode switches to the interlace
” will be displayed on the front panel display
and “
briefly.)
7. DISC MENU button (DVD)
• Press to display the disc menu. To change original and playlist
on the TV screen.
8. Cursor K / L / { / B buttons
• Press to select items or settings.
9. CLEAR button
DVD mode:
• Press to clear the password once entered, to cancel the
programming for CD, to clear the selecting marker number in
the display menu, etc.
VCR mode:
• Press to reset the tape counter.
10. INSTANT SKIP button (DVD)
• During playback, press to skip 30 seconds.
11. REV E button
DVD mode:
• During playback, press to fast reverse playback.
• When playback is in pause, press to slow reverse playback.
VCR mode:
• During playback, press to view the picture rapidly in reverse.
• Press to fast reverse the cassette tape in stop mode.
12. PLAY B button
• Press to start playback or resume playback.
13. SKIP H button (DVD)
• During playback, press to return to the beginning of the current
chapter, track or file.
• During playback, press twice in quick succession to skip to the
previous chapter or track.
• When playback is in pause, press repeatedly to reverse the
playback step by step.
14. PAUSE F button
• Press to pause playback or recording.
15. DUBBING button
• Press to start VCR to DVD (DVD to VCR) duplication which you
set in the main menu.
16. REPEAT button
DVD mode:
• Press to select the repeat mode.
VCR mode:
• Press to set or release the Auto Repeat Playback. In the Auto
Repeat Playback mode, tape is played to its end, the tape will
rewind to the beginning and start playback itself.
17. TIMER SET button
• Press to set the unit in the timer standby mode. In the timer
standby mode, press to cancel the mode and to turn the unit
on.
Connections
(*) The unit can also be turned on by pressing these buttons.
13
2009/04/03 15:36:19
THE VCR / DVD RECORDER SWITCHING
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish
to operate with [VCR/DVD].
DVD mode
VCR mode
Press [DVD] on the remote control.
(Verify that the DVD indicator is lit.)
Press [VCR] on the remote control.
(Verify that the VCR indicator is lit.)
OPEN/
CLOSE
INPUT
SELECT
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
DTV/TV
SETUP
HDMI
DVR670
CH
TIMER
PROG.
SPACE
DISPLAY
DISC MENU
DVD indicator
VCR indicator
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
SKIP
STOP
FWD
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
DVD button
VCR button
ZOOM
SE-R0294
Note
• You cannot switch to another mode (DVD or VCR) in the timer-standby mode.
• Playback will stop when you change the output mode.
14
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 14
2009/04/03 15:36:20
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.
Introduction
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
On-Screen Display / Menu
OFF
Connections
The on-screen display changes in the following order
as you press [DISPLAY].
Disc Information / Menu
5
DVD mode
1/ 5
2
1/ 5
0:01:00 / 1:23:45
DTV Program Guide (only in DTV mode)
-RW
VR
ORG
Basic Setup
CH 10
Disc Information/Menu
6
HDMI Information
(only for the images output through the HDMI output)
1
2
3
4
PROGRAM TITLE NAME
123-45
WLIW-DT
90
ENGLISH
4
* This is an example screen only for explanation.
1. Indicates a disc type and format mode.
2. Indicates a type of titles for VR mode DVD-RW .
3. Indicates a channel number or selected external input
mode.
4. Indicates a recording mode and possible recording
time left.
5. Indicates a title number/total number of titles, chapter
number/total number of chapters, elapsed time and
total time of disc playback.
6. Each icon means:
: Search
: Marker
: Audio
: Noise Reduction / Black Level
: Subtitle
: Zoom
: Angle
: Surround
: Repeat
7. Indicates an operation status.
Editing
INFORMATION-1
INFORMATION-2
INFORMATION-3
INFORMATION-4
INFORMATION-5
INFORMATION-6
TV-PG
5
6
7
8
7
1:53
Note
• In some descriptions on this manual, only one disc
type is indicated as an example.
Function Setup
VCR Function
1. Program title (max. 2 lines displayed)
2. Closed Caption (Indicates that the program being
broadcast is available with closed captioning.)
3. Signal strength (Indicates the signal strength of the
current channel.)
4. Program guide (max. 6 lines displayed)
5. Channel number
6. Broadcast station
7. Audio language (“Other” is displayed when the
audio language cannot be acquired, or the acquired
languages are other than English, Spanish or French.)
8. Program rating
Note
Others
• When the program guide is displayed in more than 7
lines, use [K / L] to scroll.
• “No description provided.” is displayed when the
program guide is not provided.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 15
Playback
DTV Program Guide
SP
Recording
MP3/WMA Tag Information
(only when a MP3 or WMA file is in playback)
3
Disc
Management
Title Name Information
(only when DVD+RW/+R, VR mode DVD-RW/-R, or
unfinalized Video mode DVD-RW/-R is in playback)
or
File Name Information
(only when a CD with MP3/WMA/
JPEG/DivX® files is in playback)
1
15
2009/04/03 15:36:21
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
On-Screen Display / Menu (cont’d)
VCR Information
VCR mode
MP3/WMA Tag Information
• First, track name will be displayed.
1
12:00AM
2
Track Name
• If you press [DISPLAY] one more time, artist name will
be displayed.
Artist Name
1.
2.
3.
4.
5.
SP
0:00:00
HIFI
3
4
5
* This is an example screen only for explanation.
Indicates current video status.
Indicates the current time.
Indicates a recording or playing back mode.
Indicates a tape counter.
Audio status of the current cassette tape.
• If you press [DISPLAY] one more time, album name
will be displayed.
Album Name
• If there is no artist, track or album name, “Not Available”
will be displayed.
HDMI Information
Note
• VCR information does not appear on the screen
when the unit is connected by an HDMI,Component
or S-Video cable, except during the playback.
Title/File Name Information
1
Video Info. :
Audio Info. :
480p
/
Bitstream
2
YCbCr
3
Title name information
Title Name
My Title
File name information
1. Indicates the resolution of the HDMI output image.
2. Indicates the HDMI video format.
3. Indicates the HDMI audio format.
• “- - -” will be displayed, when it does not have any
information.
File Name
My File
16
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 16
2009/04/03 15:36:22
Main Menu
Setup
1
2
3
4
5
General Setting
Timer Programming
Title List
DVD Menu
DISC Playback Mode
Basic Setup
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
To call up the title list.
4. DVD Menu:
To set up the DVD setting.
5. DISC Playback Mode:
To set up the disc playback setting.
• “DISC Playback Mode” is available only when an
audio CD, a CD-RW/-R with MP3 / WMA / JPEG files is
inserted into the unit.
Connections
Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [ENTER] to display the
menu. These menus provide entries to all main functions
of the unit.
Introduction
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
General Setting Menu
Recording
Playback
1. Playback:
To set up the unit to play back discs as you prefer.
2. Display:
To set up the OSD screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Channel:
To adjust the channel setting of the unit as you prefer.
7. DivX:
To set up the setting for the DivX® playback.
8. HDMI:
To set up the HDMI connection setting.
9. Reset All:
To reset the setting to the factory default.
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
Disc
Management
1
2
3
4
5
2
6
3
7
8
4
9
5
DVD Menu / DISC Playback Mode
<DVD Menu menu>
Format
Finalize
Disc Protect OFF ON
Delete All Playlists
DISC Playback Mode
5
1
6
2
Random Play
Program Play
DISC Playback Mode
Music
Photo
Random Play
Slide Show
Others
1
7
8
2
5
1
9
1
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 17
VCR Function
When a JPEG/MP3/WMA disc is inserted :
Function Setup
<DISC Playback Mode menu>
When Audio CD is inserted :
Editing
DVD Menu
1
2
3
4
1. Format: (DVD-RW, DVD+RW only)
Allows you to format the disc.
2. Finalize:
Allows you to finalize a disc containing recorded titles.
3. Disc Protect: (VR mode DVD-RW, DVD+RW/+R only)
Allows you to protect a disc from accidental editing or
recording.
4. Delete All Playlists: (VR mode DVD-RW only)
Allows you to delete playlist.
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (Audio CD only)
Allows you to activate the program playback feature.
7. Music:
Allows you to make setting for MP3/WMA playback.
8. Photo:
Allows you to make setting for JPEG playback.
9. Slide Show: (JPEG files only)
Allows you to select the display time of the slide show
mode.
17
2009/04/03 15:36:23
FRONT PANEL DISPLAY GUIDE
2
1
PM
3
DTV BS CS
DR
CD
VCR
DB HDD
DVD
4
5
1.
PM
4. Current status of the unit
: Appears in the afternoon with
the clock display.
2.
DTV
DVD
: Appears when this unit is in
DVD output mode.
: Appears when the timer
recording is proceeding in
DVD.
: Appears when DVD is in the
timer recording standby
mode.
: Flashes when a program
cannot be performed for
some reasons.
DB
: Appears during VCR to DVD
duplication process.
: Appears during DVD to VCR
duplication process.
: Appears when playback is
paused.
: Appears when playing back a
disc.
: Appears when the channel is
in DTV mode.
: Appears when the timer
programming or OTR has
been set and is proceeding.
: Flashes when all timer
recordings have been
finished.
3. Title / track / file and chapter mark
: Appears when indicating a
title/track number.
: Appears when indicating a
chapter number.
: Appears during recording
process.
: Flashes when a recording
pauses.
: Appears when this unit is in
DVD output mode and a disc
is in the unit.
: Appears during duplication
process.
: Appears when this unit is in
VCR output mode and a
cassette tape is in the unit.
: Appears during duplication
process.
VCR
5. Displays the following
• Elapsed playback time
• Current title / chapter / track / file
number
• Recording time / remaining time
• Clock
• Channel number
• Remaining time for one-touch
timer recording
• Selected HDMI video resolution
: Appears when this unit is in
VCR output mode.
: Appears when the timer
recording is proceeding in VCR.
: Appears when VCR is in the
timer recording standby mode.
: Flashes when a program
cannot be performed for
some reasons.
Display Message
Appears when the disc tray is
opening.
Appears when HDMI video
resolution (480p) is selected.
Appears when the disc tray is
closing.
Appears when HDMI video
resolution (720p) is selected.
Appears when a disc is loaded
on the disc tray.
Appears when HDMI video
resolution (1080i) is selected.
Appears when data is being
recorded on a disc.
Appears when HDMI video
resolution (1080p) is selected.
DVD
DVD
DVD
DVD
18
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 18
2009/04/03 15:36:24
Introduction
CONNECTION
Read this first:
1) Disconnect the AC power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) After making all the connections, connect the AC power cords of the devices.
Antenna Connection (Required)
Connections
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures
may be distorted due to the copy protection system.
Basic Setup
rear of this unit
RF coaxial
cable
ANT. IN
Disc
Management
This connection is for
TV loop through only
VHF / UHF
antenna
OUT
IN
ANTENNA
RF coaxial cable
or
Recording
cable TV
company
Choose one of the following connections
depending on the jacks on your TV.
Note
Playback
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before
moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• ANTENNA OUT jack is for tuner pass through only. DVD playback through the RF is not possible.
Editing
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.
If Your TV has
Higher
Quality
HDMI IN
S-VIDEO IN
R
L
AUDIO IN VIDEO IN
page
22
If you are using
cable / satellite box
page
23
page
21
page
21
page
20
If your device has
only an ANT. IN jack
ANT. IN
page
24
Others
Standard
Quality
Refer to
VCR Function
COMPONENT VIDEO IN
Function Setup
Overview
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 19
19
2009/04/03 15:36:30
CONNECTION
Connecting to a TV Using Audio / Video Out Jacks
IN --- AUDIO --- OUT
L
AUDIO IN
RCA audio cable
R
L
R
IN ---VIDEO --- OUT
RCA video cable
VIDEO IN
rear of this unit
ANT. IN
This connection is for
TV loop through only
RF coaxial
cable
VHF / UHF
antenna
OUT
IN
ANTENNA
RF coaxial cable
or
cable TV
company
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
20
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 20
2009/04/03 15:36:40
Introduction
CONNECTION
Connecting to a TV Using the S-Video Out Jack
RCA audio cable
S-VIDEO
Connections
AUDIO
OUT
AUDIO IN
OUT
S-VIDEO IN
S-video cable
rear of this unit
This connection is for
TV loop through only
VHF / UHF
antenna
RF coaxial
cable
OUT
RF coaxial
cable
Disc
Management
IN
ANTENNA
Basic Setup
ANT. IN
or
cable TV
company
Supplied cables used in this connection are as follows:
Recording
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Connecting to a TV Using Component Video Out Jacks
Playback
AUDIO IN
L
RCA audio cable
R
AUDIO
OUT
DVD / VCR
COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN
(Green)
(Green)
L
PB
/CB
R
PR
/CR
(Blue)
(Red)
RCA component
video cable
Y
(Blue)
PB
/CB
(Red)
PR
/CR
RF coaxial
cable
ANT. IN
This connection is for
TV loop through only
VHF / UHF
antenna
OUT
RF coaxial
cable
VCR Function
IN
ANTENNA
Function Setup
rear of this unit
Editing
Y
or
cable TV
company
Supplied cables used in this connection are as follows:
Others
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 21
21
2009/04/03 15:36:44
CONNECTION
Connecting to a TV with an HDMI™ Compatible Port
• HDMI outputs the video / audio signals without converting to analog signals.
• No audio connection is required.
HDMI IN
HDMI cable
rear of this unit
ANT. IN
This connection is for
TV loop through only
VHF / UHF
antenna
OUT
RF coaxial
cable
Do not tilt the connector when inserting it into the HDMI jack, and make sure the
shapes of the jack and the connector are matched.
IN
ANTENNA
RF coaxial cable
Supplied cables used in this connection are as follows:
or
cable TV
company
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.
HDMI Video Resolution and Actual Output Signals
Press [HDMI] to select the HDMI video resolution. The video resolution mode changes as follows every time [HDMI] is
pressed.
Front Panel Display
Video Output Signal
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
1080 interlaced
Press [HDMI]
1080 Progressive
Press [HDMI]
Copyright protection system
To play back the digital video images of a DVD via
an HDMI connection, it is necessary that both the
player and the display device (or an AV amplifier)
support a copyright protection system called HDCP
(high-bandwidth digital content protection
system). HDCP is copy protection technology that
comprises data encryption and authentication of
the connected AV device. This unit supports HDCP.
Please read the operating instructions of your
display device (or AV amplifier) for more
information.
*HDMI: High Definition Multimedia Interface
• The HDMI mode that is not supported by display device will be skipped.
Note
• Some devices with an HDMI input may not operate properly with this unit.
• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this unit cannot be
controlled by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may be limited
by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device such as
this unit, audio signals are not output from the HDMI output connector.
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable, the
signals are output in digital RGB.
• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur. Please check and set the
HDMI setting again.
• HDMI video resolution cannot be changed when the unit is in VCR mode.
22
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 22
2009/04/03 15:36:51
Introduction
CONNECTION
Connecting to a Cable / Satellite Box
Connections
e.g.)
RCA video cable
RCA audio cable
IN --- AUDIO --- OUT
AUDIO IN
RCA audio
cable
R
IN ---VIDEO --- OUT
R
L
Basic Setup
L
L
AUDIO OUT
VIDEO OUT
R
VIDEO IN
RCA video cable
cable/satellite box
Disc
Management
RF coaxial
cable
rear of this unit
ANT.OUT ANT. IN
ANT. IN
satellite
dish
This connection is for
TV loop through only
RF coaxial cable
After making the connection as described above,
make sure to select the appropriate input type by
following the steps on page 55.
RF coaxial
cable
IN
Recording
OUT
or
cable TV
company
ANTENNA
Playback
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Editing
Note
Function Setup
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
• Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUT jacks or
HDMI OUT jack for connecting to your TV.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the cable/
satellite box is turned on.
• You cannot record one channel while watching another channel.
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 23
23
2009/04/03 15:36:59
CONNECTION
Connecting to a TV without Audio / Video Jacks
Set channel 3 or 4
ANT. IN
rear of this unit
VHF / UHF
antenna
IN --- AUDIO --- OUT
OUT
L
R
IN
IN ---VIDEO --- OUT
ANTENNA
RF coaxial
cable
RF coaxial cable
RCA audio cable
or
cable TV
company
RCA video cable
RF coaxial cable
R
TO TV
L
AUDIO IN
VIDEO IN
3
4
CHANNEL
ANT. IN
RF modulator (not supplied)
Set channel 3 or 4
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• RF modulator is not supplied
with this unit. You need to
purchase it at your local store.
• The quality of picture may
become poor if this unit is
connected to an RF modulator.
Digital Audio Connection
Coaxial Cable Connection
DIGITAL
AUDIO OUT
Dolby Digital decoder
COAXIAL
digital audio
coaxial cable
rear of this unit
COAXIAL
digital audio
coaxial input jack
HDMI Audio Connection
AV receiver / amplifier with an HDMI input jack
HDMI IN
rear of this unit
HDMI
cable
To set up “HDMI Audio”, refer to pages 98 and 108-109.
No supplied cables are used in these connections:
Please purchase the necessary cables at your local store.
24
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 24
2009/04/03 15:37:04
Introduction
CONNECTION
Multi Channel Digital Audio Setting
To set up “Dolby Digital”, refer to pages 96, 99 and 101.
Setting in the Setup Menu
Dolby Digital
LPCM
DTS Setting of
this unit
(refer to page 101)
HDMI Out
Digital Audio Out
Stream
—
Dolby Digital
Dolby Digital
PCM
—
2 channel PCM
2 channel PCM
—
ON
DTS
DTS
—
OFF
No output
No output
Stream
ON
2 channel PCM
2 channel PCM
PCM
OFF
2 channel PCM
2 channel PCM
Basic Setup
DTS
Dolby Digital Setting
of this unit (refer to
page 101)
Connections
Audio Format (disc)
Actual Audio Output
Recording
Playback
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by
an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround
sound as heard in the movie theaters.
• By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the
original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
• For audio CD and MP3 / WMA files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select
“Stream” in “Dolby Digital” setting (Refer to page 101).
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit
length) maybe limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections
with device such as this unit, audio signals are not output from the HDMI output connector.
• If the connected equipment is not compatible with HDMI BITSTREAM, DTS sound will not be output.
Disc
Management
Note
2 Channel Analog Audio Connection
stereo system
AUDIO
OUT
rear of this unit
AUDIO IN
R
Editing
analog audio
input jacks
L
L
R
Function Setup
RCA audio cable
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 25
25
2009/04/03 15:37:13
INITIAL SETTING
When you turn on this unit for the first time, you need to follow these steps after you have completed all the connections.
OPEN/
CLOSE
INPUT
SELECT
3
HDMI
Use [K / L] to select the desired
channel preset type then press
[ENTER].
Initial Setting
.@/:
ABC
DEF
Channel Preset
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
SETUP
DTV/TV
DISPLAY
DISC MENU
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
Make sure the antenna is
connected to “ANTENNA IN” jack.
Air
Cable
Cable (Extended Scan)
Auto Preset will scan all terrestrial channels.
This may take a while to complete.
The unit will start getting channels available in
your area.
Air:
(When using antenna)
The channels broadcasted in TV and DTV are
automatically scanned and memorized. Only the
receivable channels in the area where this TV is
used will be memorized.
Cable:
(When using basic cable)
The channels broadcasted in CATV are
automatically scanned and memorized.
Cable (Extended Scan):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
ZOOM
CH
1
Auto Presetting Now
SE-R0294
1
2
Press [I/y
y ON/STANDBY].
Before:
Turn the TV on. Select the input to
which the unit is connected.
If a PBS (public broadcasting station) is available
in your area, clock setting will automatically be
performed and the correct clock will be displayed
following the channel preset procedure.
Initial setting is then completed.
Press [RETURN] to exit.
If a PBS (public broadcasting station) is not
available in your area, press [ENTER]. Then
proceed to step 5 in “Manual Clock Setting” on
page 32.
Use [K / L] to select your desired
language, then press [ENTER] to set
language.
Initial Setting
OSD Language
English
Français
Español
Select the language for Setup display.
26
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 26
2009/04/03 15:37:18
Introduction
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.
Auto Channel Scan
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
SETUP
DISPLAY
DISC MENU
AUDIO
TOP MENU
ENTER
CLEAR
SKIP
STOP
SKIP
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
SE-R0294
Others
• If the auto channel preset is canceled during
presetting, some channels not yet preset may not be
received.
• The selection will depend on how you receive the TV
channels.
To cycle through only the memorized channels, use
[CH
/ ].
To select a channel directly (including the ones not
memorized), use [the Number buttons] and [-] (for
digital TV channels).
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 27
VCR Function
Note
Function Setup
5
When scanning is over, press [SETUP]
to exit.
Editing
The unit will start getting channels available in
your area.
Air:
(When using antenna)
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable:
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Extended Scan):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
To cancel the auto channel preset during
scanning:
Press [RETURN] to go back to the previous
screen or [SETUP] to cancel.
Playback
PAUSE
Use [K / L] to select the type of
broadcasting signal, then press
[ENTER].
Recording
FWD
Use [K / L] to select “Auto Channel
Preset”, then press [ENTER].
Air
Cable
Cable (Extended Scan)
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
PLAY
“Channel” menu will appear.
Auto Channel Preset
RETURN
REV
Use [K / L] to select “Channel”, then
press [ENTER].
Disc
Management
DTV/TV
1
2
3
4
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
Basic Setup
INPUT
SELECT
Connections
OPEN/
CLOSE
27
2009/04/03 15:37:20
CHANNEL SETTING
Adding/Deleting Channels
You may want to add or delete TV channels if your
channel lineup changes or if you no longer watch some
channels.
Adding channels is only available for the analog TV
channels.
Make sure
• You perform “Auto Channel Scan” before adding or
deleting the channels.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
DISC MENU
AUDIO
1
2
3
4
Press [DTV/TV] to select the mode
(DTV or TV) to/from which you want
to add or delete channels.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
Use [K / L] to select “Channel”, then
press [ENTER].
“Channel” menu will appear.
Use [K / L] to select “Manual Channel
Preset”, then press [ENTER].
“Manual Channel Preset” menu will appear.
• If you are adding or deleting analog TV
on page 29 to
channels, go to
ANALOG
continue.
• If you are deleting digital TV channels, go to
on page 29 to continue.
DIGITAL
TOP MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
SE-R0294
28
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 28
2009/04/03 15:37:22
Introduction
CHANNEL SETTING
Adding/Deleting Channels (cont’d)
Manual Channel Preset
6
CH 2
• If the setting is complete, press [RETURN] to
activate “Manual Channel Preset”.
Manual Channel Preset
Your setting will be activated and it will
automatically switch to the next channel so that
you can continue adding or deleting channels.
DTV 2
(CH - - - )
Add
Delete
Press [SETUP] to exit.
Your setting will be activated.
Playback
7
Use [K / L] to select “Delete”, then
press [ENTER]. Then select the next
channel to delete.
Recording
Add
Delete
• Only the major channel is displayed in “Manual
Channel Preset” menu. (The channel number
displayed in the parenthesis is a virtual channel
number)
/ ] to cycle through only the
• Use [CH
memorized channels.
• You cannot use [{ / B] for the digital TV
channel selection.
• Use [the Number buttons] to select a channel
directly.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
Disc
Management
Use [K / L] to select “Add” or
“Delete”, then press [ENTER].
5
Basic Setup
6
• Use [CH
/ ] to cycle through only the
memorized channels.
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected,
“Delete” is checked and highlighted as a
default.
DIGITAL
Select the channel number to delete.
Connections
5
ANALOG
Select the channel number to add or
delete.
WARNING:
• For the digital TV channels, you cannot recover the
deleted channels once they are deleted unless you
perform the auto channel preset again.
Editing
7
Press [SETUP] to exit.
Function Setup
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 29
29
2009/04/03 15:37:24
SETTING THE CLOCK
Auto Clock Setting
This unit can set the time and date automatically by
referring to a channel that carries a clock information. If a
PBS (public broadcasting station) is available in your area,
follow “Auto Clock Setting” below. If not, follow “Manual
Clock Setting” on page 32.
Make sure
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to pages27-29.)
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
SETUP
DTV/TV
DISPLAY
DISC MENU
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
1
2
3
4
5
6
ANALOG AUTO CLOCK SETTING
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
Use [K / L] to select “Auto Clock
Setting”, then press [ENTER].
Use [K / L] to select “Auto”, then
press [ENTER].
Auto Clock Setting
OFF
Auto
Manual
Press [SETUP] to exit.
Press [I/y
y ON/STANDBY] to turn off
the unit.
This unit will search for the time only when the
power is off. Leave it off for at least 15 minutes
to give this unit time to set the clock.
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
SE-R0294
ZOOM
Manual Auto Clock Setting
If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.
1
2
Select “Manual” at step 4, then press
[ENTER].
Use [the Number buttons] or [K / L]
to enter your PBS channel number,
then press [ENTER].
Set Channel No.
CH
3
30
1
Press [SETUP] to exit and turn off the
unit.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 30
2009/04/03 15:37:25
Introduction
SETTING THE CLOCK
Auto Clock Setting (cont’d)
“Clock” menu will appear.
Use [K / L] to select “Auto Clock
Setting”, then press [ENTER].
Time adjustment for each time zone
Auto Clock Setting
OFF
Auto
Manual
Set Channel No.
DTV
GMT (Greenwich Mean Time ) - 4 hours
Eastern
GMT (Greenwich Mean Time ) - 5 hours
Central
GMT (Greenwich Mean Time ) - 6 hours
Mountain
GMT (Greenwich Mean Time ) - 7 hours
Pacific
GMT (Greenwich Mean Time ) - 8 hours
Alaska
GMT (Greenwich Mean Time ) - 9 hours
Hawaii
GMT (Greenwich Mean Time ) - 10 hours
Recording
Press [{ ] to highlight “CH”. Press
[K / L] to select “DTV”, then press
[ B] .
Atlantic
Disc
Management
Use [K / L] to select “Manual”, then
press [ENTER].
• The unit receives the clock data at 12:00 a.m/p.m
when the power is off.
• The clock may set itself automatically after this unit
receive the antenna/cable signal and plug in the
power cord.
• If the clock is not set correctly, timer recording does
not work properly.
• When analog broadcast ends, analog auto clock
setting will no longer be available. Try digital auto
clock setting in that case.
• For digital auto clock setting, incorrect time may be
obtained depending on the broadcast information.
If this occurs, set the “Auto Clock Setting“ to “OFF” at
step 4 and try “Manual Clock Setting“ on page 32.
Basic Setup
5
Use [K / L] to select “Clock”, then
press [ENTER].
Note for auto clock setting
Connections
1
2
3
4
DIGITAL AUTO CLOCK SETTING
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
1
8
Press [SETUP] to exit and turn off the
unit.
Playback
6
7
Use [the Number buttons] or [K / L]
to enter the desired major channel
number to refer, then press [ENTER].
Editing
Use [K / L] to select the desired time
zone, then press [ENTER].
Time Zone
Function Setup
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
VCR Function
This unit will search for the time only when the
power is off. Leave it off for at least 15 minutes
to give this unit time to set the clock.
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 31
31
2009/04/03 15:37:27
SETTING THE CLOCK
Manual Clock Setting
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
1
2
3
4
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
Use [K / L] to select “Clock Setting”,
then press [ENTER].
Use [K / L] to select calendar or time,
then press [ENTER].
Clock Setting
JAN / 01 / 2009 ( THU )
12 : 00 AM
Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[ENTER].
5
Daylight Saving Time
When “Daylight Saving Time” is “ON”, the unit clock will
automatically adjust the time in order to fit the daylight
saving time.
“ON (MAR - NOV)” has been selected as the default.
1
2
3
4
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
Use [K / L] to select “Daylight Saving
Time”, then press [ENTER].
Use [K / L] to select “ON (MAR NOV)”, “ON (APR - OCT)” or “OFF”,
then press [ENTER].
Daylight Saving Time
ON (MAR - NOV)
ON (APR - OCT)
OFF
Clock Setting
ON (MAR - NOV):
Move forward one hour on the second Sunday in
March and move back one hour on the first
Sunday in November.
ON (APR - OCT):
Move forward one hour on the first Sunday in
April and move back one hour on the last
Sunday in October.
JAN / 01 / 2009 ( THU )
12 : 00 AM
Your setting will be activated.
The clock start counting when you press
[ENTER].
6
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
Press [SETUP] to exit.
5
Press [SETUP] to exit.
Note
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds when you set the clock manually.
• For setting the day, year, hour and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2008
up to 2058.
32
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 32
2009/04/03 15:37:28
Switching Analog Mode /
Digital Mode
Press [DTV/TV] on the remote control.
• The analog mode and digital mode switch alternately.
Note
DTV 2-1
[CH
/
Use [CH
]
/
/
] or [the Number
] to change the channel.
Recording
Playback
[the Number buttons]
Press the channel number with [the Number buttons] to
select a channel you want to watch.
<Analog TV channels>
Enter the channel number with [the Number buttons] to
select a channel you want to watch.
For 1-digit number
e.g.) 2 ch:
[0] + [2], [2] + [-] or
[2] + leave it for 2 seconds.
For 2-digit number
e.g.) 25ch:
[2] + [5]
<Digital TV channels>
Enter the major and minor channel number with [the
Number buttons] to select a channel you want to watch.
For 1-digit number
e.g.) 2-2 ch:
major channel
[0] + [2] or [2] + [-]
minor channel
[0] + [2], [2] + [-] or
[2] + leave it for 2 seconds.
For 2-digit number
e.g.) 35-16ch:
major channel
[3] + [5]
minor channel
[1] + [6]
• If you enter 1 digit for major channel and leave it for 2
seconds, the number will be taken as the major channel
and lowest minor channel of the major channel will be
displayed.
• If there is no minor channel input, lowest minor channel
of the major channel will be displayed.
Disc
Management
Now Scanning
Select channels by using [CH
buttons] on remote control.
Basic Setup
• When you switch the analog mode to the digital
mode, it may take awhile until the digital channel
selection is completed. The following screen is
displayed while switching the mode.
Channel Selection
Connections
You can easily switch the analog TV (NTSC) and digital TV
(ATSC) with the remote control.
Introduction
TUNER SETTINGS
Note
NTSC
ATSC
18:00
DTV4-1 Smallest Smallest
CH
CH
18:30
VCR Function
DTV4-1 DTV4-2 DTV4-3
CH4
19:00
19:30
20:00
DTV4-1 Smallest DTV4-3
CH
DTV4-1 DTV4-2 Smallest
CH
: change automatically
: change manually by using [CH
/
Function Setup
About minor-channel broadcasting:
There may be different programs being broadcast on
minor channels through a single channel from ATSC. You
can watch each minor channel program being broadcast
by selecting one of the minor channels.
Editing
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
]
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 33
33
2009/04/03 15:37:29
TUNER SETTINGS
This section describes how to switch the TV audio.
When you record a TV program, only output sound channel will be recorded.
Selecting TV Audio
Digital TV
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
1
SETUP
English 1/2
CH
TIMER
PROG.
SPACE
DTV/TV
Press [AUDIO ] to cycle through
available audio languages.
AUDIO
DISPLAY
DISC MENU
TOP MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
• When you press [AUDIO ], selected
language will be displayed on the TV screen.
• Every time you press [AUDIO ], the language
will be switched.
e.g.) English 1/3 → Spanish 2/3 → Other 3/3
• Available languages differ depending on the
broadcast.
• The information display will automatically
disappear.
• When you record digital TV broadcasting, the
audio language you have selected will be
recorded.
ZOOM
SE-R0294
Note
• The timer recording for digital TV cannot record any
audio language other than default audio.
• [AUDIO ] does not control external device audio.
• When there is only one audio channel on the
broadcast, pressing [AUDIO ] does not display
anything.
34
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 34
2009/04/03 15:37:30
Introduction
TUNER SETTINGS
Selecting TV Audio (cont’d)
Analog TV
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
SETUP
DISPLAY
DISC MENU
AUDIO
TOP MENU
Use [K / L] to select “Channel”, then
press [ENTER].
“Channel” menu will appear.
Use [K / L] to select “TV Audio
Select”, then press [ENTER].
Use [K / L] to select “Stereo” or
“SAP”, then press [ENTER].
TV Audio Select
Stereo
SAP
ENTER
RETURN
Stereo:
Outputs main-audio.
SAP (secondary audio program):
Outputs sub-audio.
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
5
Press [SETUP] to exit.
Playback
PAUSE
Recording
CLEAR
Disc
Management
DTV/TV
1
2
3
4
ZOOM
Note on recording analog TV channel audio
Selected
audio
Stereo
Disc
recording
Audio
output
STEREO
STEREO
STEREO
STEREO
STEREO
MONO+SAP
MONO
MONO
MONO
MONO
MONO
STEREO+SAP
SAP
SAP
STEREO
STEREO
STEREO
MONO+SAP
SAP
SAP
MONO
MONO
MONO
EN
Others
STEREO+SAP
VCR Function
SAP
Broadcast
audio
Function Setup
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “Channel” menu beforehand.
Refer to the following table to check an appropriate
setting.
Editing
SE-R0294
E9SK0UD_DVR670KU_EN_v1.1.indd 35
Basic Setup
INPUT
SELECT
Connections
OPEN/
CLOSE
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
35
2009/04/03 15:37:32
TUNER SETTINGS
DTV Closed Caption
Digital TV
Apart from closed captions, Digital TV has its own closed captions called DTV CC. Use this menu to change the settings
for DTV CC.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
DISC MENU
AUDIO
1
2
3
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
4
5
Use [K / L] to select “Caption Service”,
then press [ENTER].
TOP MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
SE-R0294
Use [K / L] to select “Display”, then
press [ENTER].
Use [K / L] to select “DTV CC”, then
press [ENTER].
OSD Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
DTV CC
Caption Service
Recording
Use [K / L] to the desired DTV closed
caption, then press [ENTER].
Caption Service
OFF
Service1
Service2
Service3
Service4
Service5
Service6
OFF:
Select if you do not want DTV CC. This is the
default.
Service 1 to Service 6:
Select one of these before changing any other
item in the closed caption menu. Choose
“Service 1” under normal circumstances.
6
36
Press [SETUP] to exit.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 36
2009/04/03 15:37:33
Introduction
TUNER SETTINGS
Closed Caption Style
Digital TV
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
DTV/TV
SETUP
DISPLAY
DISC MENU
AUDIO
4
Use [K / L] to select “User Setting”,
then press [ENTER].
5
Use [K / L] to select “ON”, then press
[ENTER].
TOP MENU
Use [K / L] to select “Display”, then
press [ENTER].
Use [K / L] to select “CC Style”, then
press [ENTER].
OSD Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
Disc
Management
TIMER
PROG.
SPACE
1
2
3
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
Basic Setup
OPEN/
CLOSE
Connections
Digital TV can also change the style of its closed caption such as font, color or size, etc.
ENTER
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
User Setting
Font Size
Font Style
Font Opacity
Font Color
Edge Type
Edge Color
Back Opacity
Back Color
User Setting
ON
OFF
Editing
SE-R0294
ZOOM
CC Style
Playback
REV
Recording
CLEAR
Function Setup
VCR Function
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 37
Others
Instructions continue on the next page.
37
2009/04/03 15:37:34
TUNER SETTINGS
Closed Caption Style (cont’d)
Digital TV
6
Use [K / L] to select the item and
switch the setting for each item you
want to set, then press [ENTER].
<Edge Type>
Edge type of the displayed caption can be
switched as below.
Edge Type
• When “User Setting” is set to “ON”, you can set
the following items. CC style set by “User
Setting” will be displayed.
• The setting description for each item is shown
below.
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
<Font Size>
Font size of the displayed caption can be
switched as below.
<Edge Color>
Edge color of the displayed caption can be
switched as below.
Font Size
Edge Color
Large
Middle
Small
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
<Font Style>
Font style of the displayed caption can be
switched as below.
CC
Style
Font
Style
<Back Opacity>
Background opacity of the displayed caption can
be switched as below.
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Back Opacity
Solid
Transparent
Translucent
Flash
<Font Opacity>
Font opacity of the displayed caption can be
switched as below.
<Back Color>
Background color of the displayed caption can
be switched as below.
Font Opacity
Back Color
Solid
Transparent
Translucent
Flash
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
<Font Color>
Font color of the displayed caption can be
switched as below.
Font Color
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
38
7
Press [SETUP] to exit.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 38
2009/04/03 15:37:36
Introduction
FORMATTING A DISC
Choosing the Recording Format of a Brand-New DVD-RW
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
1
2
Use [K / L] to select “DVD Menu”,
then press [ENTER].
Setup
General Setting
Disc
Management
INPUT
SELECT
Press [SETUP].
Basic Setup
OPEN/
CLOSE
Timer Programming
Title List
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
DISC MENU
AUDIO
TOP MENU
DVD Menu
3
Use [K / L] to select “Format”, then
press [ENTER].
4
Use [K / L] to select “Format Mode”,
then press [ENTER].
Recording
DVD Menu
Format
Finalize
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
SKIP
FWD
PLAY
STOP
DVD Menu
Format
Finalize
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
ZOOM
SE-R0294
Press [SETUP] to exit.
Insert a brand-new disc.
Formatting will start.
Formatting
90%
VCR Function
Formatting is completed.
“100%” is indicated.
Others
• The recording format setting is effective only for
DVD-RW. You cannot change the recording format
for a DVD-R and DVD+RW/+R.
• You cannot mix two formats on one DVD-RW disc. If
you insert a disc that has been formatted before, the
recording format is not changed if you select another
format in the “Setup” menu only. To reformat a disc
(change disc format type), refer to “Reformatting a
Disc Manually” on page 40.
Use [K / L] to select “Video mode” or
“VR mode”, then press [ENTER].
Function Setup
Note
5
6
7
8
Start
Format Mode
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 39
Editing
REPEAT TIMER SET SEARCH
Playback
REV
Connections
When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will
always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording
format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the
desired mode. You can also manually format a DVD-RW once it has been used.
39
2009/04/03 15:37:38
FORMATTING A DISC
Reformatting a Disc Manually
If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for
either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc.
Insert a recordable disc.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
1
2
Press [SETUP].
Use [K / L] to select “DVD Menu”,
then press [ENTER].
Setup
General Setting
Timer Programming
DTV/TV
SETUP
DISPLAY
Title List
AUDIO
DVD Menu
DISC MENU
TOP MENU
ENTER
CLEAR
RETURN
3
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
DUBBING
VCR
REC MODE
REPEAT TIMER SET SEARCH
DVD
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete All Playlists
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
Use [K / L] to select “Format”, then
press [ENTER].
4
REC
Use [K / L] to select “Start”, then
press [ENTER].
DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete All Playlists
Start
Format Mode
Selection menu will appear and prompt you to
confirm.
• For DVD+RW, use [K / L] to select “Yes”, then
press [ENTER].
ZOOM
SE-R0294
5
Use [K / L] to select “Yes”, then press
[ENTER].
Formatting will start.
If you want to cancel formatting, select “No”.
Are you sure?
Yes
No
Note
• When you reformat the disc, the contents of the disc
are erased.
• For DVD-RW, make sure that the recording format is
set to the desired mode. (See steps 1 to 6 in
“Choosing the Recording Format of a Brand-New
DVD-RW” on page 39.)
• This unit may not be able to reformat a disc that is
not previously formatted by this unit (e.g. DVD disc
formatted by PC or another recorder).
40
6
Formatting is completed.
“100%” is indicated.
Formatting
100%
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 40
2009/04/03 15:37:40
To prevent accidental recording, editing or erasing the
titles, you can protect them from “DVD Menu” menu.
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
Use [K / L] to select “DVD Menu”,
then press [ENTER].
Use [K / L] to select “Disc Protect
OFF ON”, then press [ENTER].
Basic Setup
INPUT
SELECT
Press [SETUP].
Connections
OPEN/
CLOSE
1
2
3
Introduction
SETTING A DISC TO PROTECT
e.g.) VR mode DVD-RW
DVD Menu
TIMER
PROG.
SPACE
SETUP
DISPLAY
DISC MENU
AUDIO
Disc
Management
DTV/TV
Format
Finalize
Disc Protect OFF ON
Delete All Playlists
TOP MENU
ENTER
CLEAR
RETURN
REV
PLAY
FWD
SKIP
STOP
SKIP
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
Protect this disc?
Yes
No
A disc will be protected.
Playback
PAUSE
4
This operation may take
awhile to be completed.
ZOOM
Editing
SE-R0294
Function Setup
Note
VCR Function
To cancel the disc protect:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON”.
DVD Menu
Format
Finalize
Disc Protect ON
OFF
Delete All Playlists
Others
To release the protection for the disc, select “Disc
Protect ON OFF” at step 3, then follow rest of the
procedures.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 41
Recording
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
Use [K / L] to select “Yes”, then press
[ENTER].
41
2009/04/03 15:37:42
PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
all timer recordings and at the end of the disc space.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
DISC MENU
AUDIO
TOP MENU
1
2
3
4
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
“General Setting” menu will appear.
Use [K / L] to select “Recording”,
then press [ENTER].
“Recording” menu will appear.
Use [K / L] to select “Auto Finalize”,
then press [ENTER].
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press
[ENTER].
Auto Finalize
Disc Full
End of Timer Rec
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
5
Use [K / L] to select “ON”, then press
[ENTER].
Disc Full
ON
OFF
End of Timer Rec
ON
OFF
ZOOM
Your setting will be activated.
SE-R0294
6
Press [SETUP] to exit.
Note
• This function is not available after finishing daily or
weekly program recording.
42
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 42
2009/04/03 15:37:45
Introduction
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
“DVD Menu“ menu will appear.
Use [K / L] to select “Finalize”, then
press [ENTER].
Use [K / L] to select “Yes”, then press
[ENTER].
e.g.) VR mode DVD-RW
Finalize disc?
Yes
No
TIMER
PROG.
SPACE
Disc
Management
INPUT
SELECT
Use [K / L] to select “DVD Menu”,
then press [ENTER].
Basic Setup
OPEN/
CLOSE
1
2
3
4
Press [SETUP].
Connections
You will need to finalize discs to play back on other DVD
players.
Finalizing may take several minutes up to an hour.
Since the process of the finalization fills empty space of
the disc, a shorter recording period on the disc will
require a longer time period for finalization. Do not
unplug the power cord during finalization.
Finalizing will start.
DTV/TV
SETUP
DISPLAY
Recording
DISC MENU
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
Playback
Finalizing
90%
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
5
Finalizing is completed.
Editing
PAUSE
This operation may take
awhile to be completed.
ZOOM
Function Setup
SE-R0294
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 43
43
2009/04/03 15:37:47
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc (cont’d)
Note
• Finalizing a disc in video mode and +VR mode
automatically creates a title menu.
• After you finalize the DVD+RW, you can call up the
title list by pressing [TOP MENU], or you can call up
the title menu by pressing [DISC MENU].
• Even after DVD+RW is finalized, you can still record
or edit. After you finalize DVD-RW/-R or DVD+R, you
cannot edit or record anything else on that disc.
• If you insert a DVD-RW finalized with this unit, “Undo
Finalization” will appear instead of “Finalize” at
step 3.
• To release the finalization of the DVD-RW disc, select
“Undo Finalization” at step 3.
DVD Menu
Format
Undo Finalization
Disc Protect OFF
Delete All Playlists
ON
To cancel finalizing...
(DVD-RW only)
Press [STOP C] during the finalizing is in progress. Use
[K / L] to select “Yes”, then press [ENTER]. Finalizing is
canceled and the unit switches to stop mode.
Do you want to cancel ?
Yes
No
Finalizing
5%
If “ ” appears when [STOP C] is pressed, you cannot
cancel finalizing because the finalizing has already
reached at a critical point in its process.
If “No” is selected and [ENTER] or [RETURN] is pressed,
finalizing is continued.
You cannot cancel finalizing a DVD-R, DVD+R and
DVD+RW once it has started.
• To undo the finalization of the DVD+RW, make an
additional recording onto the disc.
• DO NOT power off during finalizing. This may result
in a malfunction.
• For DVD+RW, if you have added or deleted chapters,
or made chapters hidden, you must finalize the disc
before being able to see those effects on other units.
To play back discs other than DVD+RW on other DVD
players, you will need to finalize.
44
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 44
2009/04/03 15:37:49
Recording Mode
Restrictions on Recording
12cm
8cm
Video/
Sound Quality
60 min 18 min
120 min 36 min
240 min 72 min
360 min 108 min
480 min 144 min
Note
Making discs playable in other DVD players (Finalize)
For DVD-RW/-R, it is necessary to finalize the disc after
recording, in order to play back the disc on other
DVD players. (Refer to pages 42-44.) For DVD+RW/+R, it is
recommended to finalize the disc in order to make the
disc more compatible to other DVD player. When video
and +VR mode disc are finalized, a title menu is created.
You cannot finalize discs in other DVD recorders.
Recording
Playback
Editing
Function Setup
• This unit cannot record to CD-RW or CD-R.
• All high definition pictures will be down converted to
the standard definition pictures when they are
recorded on this unit.
• DVD-RW/-R, DVD+RW/+R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
• Discs recorded in video mode on this unit cannot
record additional information using other DVD
recorders.
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
Disc
Management
• The recording times listed above are estimates and are
for reference purposes only. Actual recording times may
vary.
• The audio and video quality of content being recorded
may differ depending on the recording mode/recording
time chosen.
What is “CPRM”?
CPRM is a copy protection system with scramble system
regarding the recording of “copy-once” broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
This unit is CPRM compatible, which means that you can
record copy-once broadcast programs, but you cannot
make another copy of those recordings. CPRM recordings
can only be made on CPRM compatible DVD-RW formatted in VR mode, and CPRM recordings can only be played
back on DVD players that are specifically compatible with
CPRM.
Basic Setup
XP
SP
LP
EP
SLP
Recording time
You cannot record copy-protected program using this
unit. Copy-protected video signal is included in DVDvideos, some satellite broadcasts, some pay-per-view
stations and some “premium” stations.
If copy-protected material is detected, recording will
pause or stop automatically and an error message
appears on the screen.
“Copy-once only” video can only be recorded to CPRM
compatible DVD-RW formatted in VR mode.
Connections
You can select a recording mode among 5 options, and
the recording time will depend on the recording mode
you select as follows.
Recording mode
Introduction
INFORMATION ON DVD RECORDING
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 45
45
2009/04/03 15:37:50
SETTINGS FOR A RECORDING
Make Recording Compatible
Use this feature to make the discs recorded on other unit
recordable on this unit. When you make an additional
recording on this unit with “Make Recording Compatible”
set to “ON”, the title list is automatically converted to our
style.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
2) Use [K / L] to select “Recording”, then press
[ENTER].
“Recording” menu will appear.
Setting for Auto Chapter
You can set a specified time for chapter marks.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
2) Use [K / L] to select “Recording”, then press [ENTER].
“Recording” menu will appear.
3) Use [K / L] to select “Auto Chapter”, then press
[ENTER].
4) Use [K / L] to select a desired time option, then
press [ENTER].
3) Use [K / L] to select “Make Recording Compatible”,
then press [ENTER].
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
4) Use [K / L] to select “ON” or “OFF”, then press
[ENTER].
Make Recording Compatible
ON
OFF
ON:
Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
Prohibiting additional record to the disc that
has a title list created by other units.
OFF:
5) Press [SETUP] to exit.
5) Press [SETUP] to exit.
Note
• The interval for auto chapter may be up to two
minutes different from the time option you set.
• A blank chapter may be created depending on the
remaining time of the disc.
Note
• This function is also available for unfinalized DVD+R.
Recording the DTV Closed Caption
You can record the DTV Closed Caption as the part of the
image for the recording program and see the recorded
closed caption even with the TV that is not closed caption
compliant.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
2) Use [K / L] to select “Display”, then press [ENTER].
3) Use [K / L] to select “DTV CC”, then press [ENTER].
4) Use [K / L] to select “Recording”, then press [ENTER].
• If the “Caption Service” is set to “OFF”, you cannot
select “Recording”.
5) Use [K / L] to select “ON”, then press [ENTER].
Recording
ON
OFF
6) Press [SETUP] to exit.
Note
• If the “Caption Service” is set to “OFF”, the caption
will not be recorded.
46
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 46
2009/04/03 15:37:52
Recording Audio Select (XP)
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
3) Use [K / L] to select “Recording Audio Select (XP)”,
then press [ENTER].
You can set aspect ratio for video mode recording.
1) Follow step 1 to 2 on “Recording Audio Select (XP)”.
2) Use [K / L] to select “Aspect Ratio (Video mode)”,
then press [ENTER].
3) Use [K / L] to select your desired setting, then press
[ENTER].
Aspect Ratio (Video mode)
4) Use [K / L] to select “PCM” or “Dolby Digital”, then
press [ENTER].
Recording Audio Select (XP)
PCM
Dolby Digital
5) Press [SETUP] to exit.
• “PCM” stands for Pulse Code Modulation. It changes
analog sound to digital sound without compressing
audio data.
• When the recording mode is set at other than XP, the
unit records “Dolby Digital” audio automatically even
if you selected “PCM”.
4) Press [SETUP] to exit.
Note
• For DVD-RW VR mode, the image will be recorded in
whichever the ratio that the program you record are
broadcasted with, regardless of the “Aspect Ratio
(Video mode)” setting.
• For DVD+RW/+R, the image will always be recorded
in aspect ratio of 4:3.
Playback
Note
Recording
PCM:
Records PCM audio for the best quality sound.
Dolby Digital:
Records Dolby Digital audio for good quality sound.
Auto (default): It will be recorded with whichever the
ratio that the program you started to record are
broadcasted with.
4:3 : Recorded in the aspect ratio of 4:3.
16:9 : Recorded in the aspect ratio of 16:9.
Disc
Management
Auto
4:3
16 : 9
Basic Setup
2) Use [K / L] to select “Recording”, then press
[ENTER].
“Recording” menu will appear.
Setting Aspect Ratio for Video Mode
Recording
Connections
You can enjoy high quality sound recording. This function
works only when the recording mode is set at XP.
Introduction
SETTINGS FOR A RECORDING
Editing
Function Setup
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 47
47
2009/04/03 15:37:55
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
SETUP
Turn on the TV and be sure to select the input to
which the unit is connected.
Press [DVD].
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
TIMER
PROG.
SPACE
DTV/TV
1
2
Press [I/y
y ON/STANDBY].
DISPLAY
DISC MENU
Align the disc to
the disc tray guide.
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
3
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
Press [OPEN/CLOSE A] to close the
disc tray.
It may take awhile to load
the disc completely.
• When inserting a brand-new DVD-RW or
DVD+RW, the unit automatically starts to
format.
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
4
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 45.
SE-R0294
SP
5
1:53
Press [DTV/TV] to select analog TV or
digital TV, then use [CH / ] or
[the Number buttons] and [-] (for
digital TV channels) to select a
desired channel to record.
Refer to “Switching Analog Mode/Digital Mode”
and “Channel Selection“ on page 33.
CH 12
48
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 48
2009/04/03 15:37:56
I
SP
7
Press [STOP C] to stop recording.
The recorded title will be included in the title list.
(Refer to “Guide to a Title List” on page 81.)
Connections
6
Press [REC I] to start recording.
“I” will be displayed for 5 seconds.
1:53
Wait for a moment
Basic Setup
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC I] again to restart
recording.
90%
This operation may take
awhile to be completed.
To set one-touch timer recording (OTR)...
Disc
Management
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
I
Introduction
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
0:30
(normal recording)
8:00
Recording
0:30
1:00
7:30
Playback
• To change the recording length during one-touch
timer recording, press [REC I] repeatedly until the
desired length appears.
• To cancel one-touch timer recording within the
specified time, press [STOP C].
Note for one-touch timer recording
E9SK0UD_DVR670KU_EN_v1.1.indd 49
Others
EN
VCR Function
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the unit into the standby mode (One-touch timer recording will be canceled.).
- Using [REC I] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode
and the VCR keeps the current mode.
• When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to
the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel
the timer-standby mode to use the unit continuously.
Function Setup
• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program onto DVD-RW, DVD-R or DVD+RW/+R, you have to select the TV channel audio
beforehand. Only the selected channel audio will be recorded. Refer to “Selecting TV Audio” on pages 34-35 for more
details.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
Editing
Note
49
2009/04/03 15:38:01
TIMER RECORDING
Guide to Timer Programming Display
3
You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space or
a cassette tape with an erase-protection tab.
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
1
2
Timer Programming
JAN/ 2/09 1:00 AM 125-01 SP
SP (1:00)
THU JAN/01 10:00AM
Date
JAN/02
Start
End
CH
1:00AM 2:00AM DTV 125- 1
New Program
1/1
CH
4
TIMER
PROG.
SPACE
SETUP
DTV/TV
DISPLAY
DISC MENU
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
5
1. Title of a Timer Program (Contains date, time, channel,
recording mode of the program)
2. Current date and time
3. Recording mode and length of the recording
4. Timer program list
5. Total number of pages and current page (2 pages maximum)
1
2
Press [TIMER PROG.].
Use [K / L] to select “New Program”,
then press [ENTER].
Timer Programming
THU JAN/01 10:00AM
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
Date
Start
End
New Program
CH
1/1
REPEAT TIMER SET SEARCH
ZOOM
Note
• If you have not set the clock yet:
“Manual Clock Setting” menu will appear instead of
the timer programming list at step 1. Continue with
the step 4 in “Manual Clock Setting” on page 32 before
setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in “Timer Programming” menu.
• If a basic recording or one-touch timer recording is in
progress on one component (e.g., VCR) and the timer
recording set for the other component (e.g., DVD) is about
to begin, the unit automatically switches to the
programmed channel for timer recording 2 minutes before
the programmed starting time, and the recording in
progress (for VCR) will be canceled UNLESS their recording
channels are the same. If their recording channels are the
same, the timer recording will start without canceling the
recording currently in progress. In this case, the recording
of the same channel will be made on both DVD and VCR.
• You cannot make a program whose recording time
exceeds 12 hours.
• Cancel the timer-standby mode by pressing [TIMER
SET] before operation for either DVD or VCR. When
finished operating, press [TIMER SET] to resume the
timer-standby mode.
• In the timer-standby mode, you can turn on the
power and use the component (VCR or DVD) which is
not currently timer-programmed.
50
• If there are 6 or more programs, use
[SKIP j / i] to change pages.
3
Use [K / L] to enter the date, then
press [B].
Date
JAN/02
CH
DTV125- 1
Start
--:-REC To
DVD
End
--:-Mode
SP
SP
2 : 00
JAN/01
Daily
MON-SAT
MON-FRI
SAT
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
FRI
SUN
JAN/31
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 50
2009/04/03 15:38:01
Date
JAN/02
CH
DTV125- 1
Start
1 : 00AM
REC To
DVD
7
End
--:-Mode
SP
SP
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SP
SP
2 : 00
1 : 00
Date
JAN/02
CH
DTV125- 1
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SP
SP
End
2 : 00AM
Mode
SP
SP
1 : 00
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SP
SP
1 : 00
e.g.) digital mode
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SP
SP
1 : 00
Use [K / L] to select a recording media
(“DVD” or “VCR”), then press [B].
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SP
SP
1 : 00
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
Auto
Auto
1 : 00
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
8
Press [ENTER] when all items are
entered.
After displaying an instructive message for 10
seconds, timer program list will appear.
Press TIMER SET to Timer standby mode.
When Timer Set on DVD or VCR,
it is not available in the standby mode.
Press TIMER SET to cancel the standby mode.
Timer Programming
JAN/ 2/09 1:00 AM 125-01 SP
SP (1:00)
THU JAN/01 11:00AM
Date
JAN/02
Start
End
12:00AM 1:00AM
CH
DTV125-1
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 51
Others
Instructions continue on the next page.
VCR Function
Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 53.
Function Setup
Date
JAN/02
CH
DTV125- 1
Date
JAN/02
CH
DTV125- 1
Editing
Date
JAN/02
CH
DTV125- 1
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
Playback
Date
JAN/02
CH
10
Auto recording mode select (DVD only) ...
Recording
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [K / L] to select the channel number to
record.
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 52 for
more details.
e.g.) analog mode
1 : 00
Disc
Management
L1
Start
1 : 00AM
REC To
DVD
Basic Setup
Use [K / L] to select analog (“- - -”) /
digital (“DTV”) mode or external
input (L1 / L2), then press [B].
Date
JAN/02
CH
6
Date
JAN/02
CH
DTV125- 1
Refer to “Recording Mode” on page 45 for DVD or
“Recording” on page 111 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
• You cannot make a program which recording
time exceeds 12 hours.
5
Use [K / L] to select a recording
mode.
Connections
4
Use [K / L / { / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Introduction
TIMER RECORDING
51
2009/04/03 15:38:05
TIMER RECORDING
9
Press [TIMER SET] to set a timer
programming.
will appear on the front panel display, while this
unit waits to make the recording.
CS
DR
CD
HDD
DVD
“VCR” will appear on the front panel display if VCR
timer recording have been set.
How to select a channel number for the timer recording
Analog TV
For channel number 2-6, press [B] or [ – ] to decide the channels. For other channels (7-69), the
channel will be decided as soon as you enter the channel number.
Analog CATV
For channel number 1-12, press [B] or [ – ] to decide the channels. For other channels (13-125),
the channel will be decided as soon as you enter the channel number.
Digital TV
For major channel number 1-9, press [B] or [ – ] after selecting the number with [K / L]. For the
other channels (10-99), the channel will be decided as soon as you enter the channel number.
Digital CATV
For major channel number 1-13, press [B] or [ – ] after selecting the number with [K / L]. For the
other channels (14-135), the channel will be decided as soon as you enter the channel number.
minor channels
For channel number 1-9, press [B] or [ – ] to decide the channels. For other channels (10-99), the
channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L], you need to press [B] or [ – ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel you are selecting is existing.
[K / L] does not skip the non-existed minor channels.
52
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 52
2009/04/03 15:38:07
To stop the timer recording in progress
If the timer program did not complete correctly,
the error number appears in the timer
programming list.
Connections
1) Press [STOP C ] on the remote control.
2) Confirmation message will appear. Select “Yes”,
then press [ENTER].
• To stop the timer recording immediately, press
[STOP C] on the unit.
Timer Programming
THU JAN/01 10:00AM
Checking, canceling, or correcting the timer
programming information
E40
Date
JAN/02
Start
End
1:00AM 2:00AM
New Program
Introduction
TIMER RECORDING
CH
DTV125- 1
1) Press [TIMER SET].
Each error number means:
3) Check the information on the list you want to edit.
E1-22 Recording error other E40
E37-39 than below
Timer Programming
Date
JAN/02
Start
End
1:00AM 2:00AM
New Program
CH
DTV125- 1
1/1
Disc protected
E30
E41
Power failed
Disc full
E42
No disc when recording
E31-32 Already 99 titles
recorded
E43
Already 49 titles
recorded
E33
Already 999 chapters
recorded
E44
Already 254 chapters
recorded
E34
No space for Control
information
E45
Copy prohibited
program
E35
PCA full *1
E46
E36
Already finalized
video format disc
It is impossible to
record additionally
on a disc recorded
by other units
when setting
“Make Recording
Compatible” to “OFF”.
6) Press [TIMER SET] to return to the timer standby
mode.
Editing
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
*1 PCA is a disc's space reserved for recording test.
Playback
5) Press [TIMER PROG.] to exit.
E25-28 Copy prohibited program
E29
Recording
4-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [ENTER].
2 Use [K / L] to select “Delete”, then press
[ENTER].
Selection menu will appear.
3 Use [K / L] to select “Yes”, then press [ENTER].
4-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [ENTER].
2 Use [K / L] to select “Program Change”, then
press [ENTER].
3 Correct the timer program by using
[K / L / { / B], then press [ENTER].
E23-24 Unrecordable disc
Disc
Management
JAN/ 2/09 1:00 AM 125-01 SP
SP (1:00)
THU JAN/01 10:00AM
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
Basic Setup
1/1
2) Press [TIMER PROG.].
Function Setup
Note
• Press [TIMER PROG.] to check the timer recording in
progress.
When the timer recording is proceeding, that
program will be highlighted in red. In this case, you
cannot select any other program.
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 53
53
2009/04/03 15:38:08
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
• If a disc is not inserted or if a inserted disc is not
recordable (finalized DVD-RW/-R, finalized DVD+RW, a
fully recorded disc, etc.), “DVD” on the front panel
display flashes and timer recording cannot be
will appear momentarily
performed. In some cases,
around the start point as the unit attempts to record.
Please insert a recordable disc.
• If a cassette tape with an erase-protection tab is not in
the cassette compartment or there is no cassette tape in
the cassette compartment, “VCR” on the front panel
display flashes and timer recording cannot be
performed. Please insert a recordable cassette tape.
• If you press [TIMER SET] and turn on the unit while
either DVD or VCR is in timer standby mode,
disappears. In this case, you cannot change the mode
between DVD and VCR. You cannot change any settings
using [SETUP] or edit discs.
• When all the timer recording is completed, flashes. To
play back or eject the recorded disc, press
[I/y ON/STANDBY] first, then select the recorded title and
press [PLAY B], or [OPEN/CLOSE A] to remove the disc.
• During timer recording or timer standby mode ( will
appear), any operations on the unit will not be available.
To make these operations available, press [STOP C] to
stop the timer recording or [TIMER SET] to cancel timer
standby mode ( will disappear).
• To cancel the timer standby mode, press [TIMER SET].
• When the starting and the ending time are the same,
“Exceeds 12 hours” appears and the program setting will
not be accepted.
• When the programmed starting and ending time are earlier
than the current time, the setting will not be accepted.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
[TIMER SET] is pressed.
• The timer recording for digital TV cannot record any
audio language other than default audio.
• The timer recording cannot be performed in DVD and
VCR at the same time. If you set 2 programming with the
same channel and time in both devices, the program
with a lower program number will be recorded.
• “Press TIMER SET for timer recording” will appear on the TV
screen 5 minutes before the programmed starting time.
The Priority of Overlapped Settings
This unit records the programs according to priority if the timer programmings are overlapped. The timer
programming set previously has priority.
A timer recording of lower priority will be canceled or start from the middle.
Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
When the starting time and the ending time
for each programs are different:
A program that has earlier start time has priority.
PROG. A
PROG. A
PROG. B
PROG. B
PROG. C
actual
PROG.
PROG.AA
PROG. B
recording
The first 2 minutes (at the longest) will be cut off.
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to
be recorded.
actual
PROG. A
PROG. C
recording
The first 2 minutes (at the longest) will be cut off.
PROG. B
When the recording time is entirely overlapped:
PROG.A will not be recorded.
PROG. A
PROG. A
PROG. B
PROG. B
actual
PROG.B
PROG.A
recording
The first 2 minutes (at the longest) will be cut off.
actual
recording
PROG. B
Note for DVD recording
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minutes or more, this
program will be displayed with errors number E40 in the
timer programming list.
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
54
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 54
2009/04/03 15:38:08
Introduction
SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device
VIDEO
OUT
AUDIO OUT
L
R
DV-OUT
external device
S-VIDEO
OUT
VIDEO
OUT
Connections
Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front).
Use S-video or the RCA audio/video cables for this connection.
When connecting a DVC (digital video camcorder), use the DV input jack on the front panel instead of S-VIDEO IN or
VIDEO IN jack.
or
AUDIO OUT
R
L
(camcorder, VCR etc.)
DV cable
(4-pin)
S-video
cable
S-VIDEO
L
R
or
DV
L2
RCA
audio cable
IN --- AUDIO --- OUT
IN
L
L
R
R
Disc
Management
VIDEO
RCA
video
cable
or
Basic Setup
RCA
audio
cable
RCA
video
cable
IN ---VIDEO --- OUT
L3
L1
to L2 & L3
to L1
Recording
rear of this unit
front of this unit
PQRS
TUV
WXYZ
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
TOP MENU
ENTER
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
Use [K / L] to select “Select Video”,
then press [ENTER].
Use [K / L] to select the input jack
type to connect, then press [ENTER].
If you want to use VIDEO IN jack, select “Video
In”.
If you want to use S-VIDEO IN jack, select
“S-Video In”.
Video In
S-Video In
Press [SETUP].
Use [K / L] to select “General
Setting”, then press [ENTER].
6
Press [SETUP] to exit.
Others
1
2
VCR Function
Select Video - L1 (Rear)
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 55
Function Setup
CLEAR
Use [K / L] to select “Video”, then
press [ENTER].
Editing
DISC MENU
AUDIO
3
4
5
Playback
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
55
2009/04/03 15:38:10
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 55.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
DTV/TV
SETUP
1
2
DISPLAY
DISC MENU
When you want to record to a
cassette tape:
Press [VCR].
Insert the cassette tape with an
erase-protection tab into the cassette
compartment.
TOP MENU
ENTER
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
7 5
1
2
56
7 5
When you want to record to the disc:
Press [DVD].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
It takes awhile to load
the disc.
AUDIO
CLEAR
Turn on the TV and press
[I/y
y ON/STANDBY], and be sure to
select the input of the TV to which
the unit is connected.
3
ZOOM
4
5
6
7
Select the input of the unit which the
external device is connected. (L1, L2
or L3)
• To use the input jacks on the rear of this unit;
Select “L1 (Rear)” by using [INPUT SELECT ]
or [CH
/ ].
• To use the input jacks on the front of this unit;
Select “L2 (Front)” or “L3 (DV-IN)” by using
/ ].
[INPUT SELECT ] or [CH
• You can also select “L1 (Rear)” or “L2 (Front)” by
using [the Number buttons].
- For L1, press [0], [0], [1].
- For L2, press [0], [0], [2].
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 45 for DVD or
“Recording” on page 111 for VCR.
Press [I REC] on the unit to start
recording.
Start playback on the external device
to record from.
Press [STOP C] / [EJECT/STOP A/ C]
on the unit to stop recording.
This operation may take
awhile to be completed.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 56
2009/04/03 15:38:12
Guide to DV and On-Screen Display
DVD mode
When the DVC is
in video mode...
1/ 1
1/ 1
1/ 1
-RW
2
Control
DV Audio
Start Rec
DVD
Stereo1
VR
1/ 1
ORG
L3 (DV-IN)
AB-1234
0:12:34
-RW
The menu changes according to
what mode of DVC.
Switch the mode on the DVC to
playback mode for the dubbing
information.
VR
ORG
5
L3 (DV-IN)
AB-1234
0:12:34
1:00
SP
4
7
Disc
Management
SP
3
When the DVC is not
in camera mode...
Basic Setup
1
1:00
6
VCR mode
You cannot control the DVC in VCR mode. For dubbing onto VCR, refer to page 59.
Recording
The following instructions are described with the operations using the remote control of this unit.
6. Product name of your DVC
• If the unit cannot recognize the
input signal from the DVC or the
unknown product, “No Device” or
“****” will appear instead.
7. Status of the current operation
and the time counter
Each icon means (Available icons
may vary depending on the DVC):
DVC is in stop mode.
DVC is in pause mode.
Function Setup
DVC is in recording pause
mode.
VCR Function
DVC is fast forwarding.
(standard speed)
DVC is fast forwarding.
(faster than above)
DVC is fast forwarding.
(faster than above)
DVC is slow forwarding.
(standard speed)
DVC is slow forwarding.
(faster than above)
DVC is slow forwarding.
(faster than above)
DVC is fast forwarding.
(in stop mode)
DVC is fast reversing.
(in stop mode)
DVC is fast reversing.
(standard speed)
DVC is fast reversing.
(faster than above)
DVC is fast reversing.
(faster than above)
DVC is in slow reverse
playback.
DVC is in recording.
Editing
DVC is in playback mode.
Playback
Others
1. DV icon
2. Indicator of active device
• When the “Control” is
highlighted, press [ENTER] to
display the item selection. Use
[K / L] to select the device you
wish to operate, then press
[ENTER] to activate.
• Select “DVD” to control this unit.
• Select “DVC” to control your DVC.
3. Recording audio mode
• Other than the DVC is in stop
mode, the “DV Audio” can be
selected. Press [ENTER] to display
the item selection and then use
[K / L] to select the audio you
wish to output. Press [ENTER]
again to activate.
• Select “Stereo1” to dub the stereo
sound.
• Select “Stereo2” to dub the sound
with after recording sound.
• Select “Mix” to dub the stereo1
and stereo2.
4. Indicator of dubbing function
• When the unit is ready for
dubbing, “Start Rec” will appear.
• When the unit is in dubbing,
“Pause Rec” will appear.
5. Channel position
• When you select “L3 (DV-IN)” by
using [INPUT SELECT ] or
[CH
/ ], “L3 (DV-IN)” will
appear.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 57
Connections
This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit.
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is
compliance with the IEEE1394 standards. When you connect to DV input jack on the front of this unit, select
“L3(DV-IN)” position by using [INPUT SELECT ] or [CH
/ ] on the remote control and press [DISPLAY] to show
the DV dubbing information for the operation of your DVC.
Introduction
DV DUBBING
57
2009/04/03 15:38:16
DV DUBBING
DVC to DVD Dubbing
Before recording from DVC, see page 55 for connection
instructions.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
2
3
4
Press [REC MODE] repeatedly to
select a recording mode.
(Refer to “Recording Mode” on page 45 for DVD or
“Recording” on page 111 for VCR.)
Press [DISPLAY].
With “Control” highlighted, press
[ENTER] to display the available
devices to control with the remote
control of this unit. Use [K / L] to
select “DVC”, then press [ENTER].
AUDIO
1/ 1
1/ 1
-RW
DISC MENU
TOP MENU
Control
DV Audio
Start Rec
DVD
Stereo1
VR
ORG
L3 (DV-IN)
AB-1234
0:12:34
ENTER
CLEAR
RETURN
XP
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
Now you can operate your DVC with the remote
control of this unit.
5
Press [PLAY B] to start playing back
the DVC, and find where you wish to
start dubbing.
Then, press [STOP C] when you come
to the desired start point.
6
7
Use [K / L] to select “Start Rec”, then
press [ENTER].
ZOOM
SE-R0294
Press [DVD] first.
Preparing for DV to DVD dubbing:
• Insert a recordable disc and make sure your DVC is in
video mode.
1
1:00
Use [INPUT SELECT ] or [CH
to select “L3 (DV-IN)”.
/
The dubbing will start.
To stop dubbing;
Use [K / L] to select “Control”, then
press [ENTER].
Use [K / L] to select “DVD”, then
press [ENTER].
Then press [STOP C].
]
L3 (DV-IN)
AB-1234
0:00:00
58
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 58
2009/04/03 15:38:19
Introduction
DV DUBBING
DVC to VCR Dubbing
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
Press [VCR] first.
5
The dubbing will start.
To pause the recording:
Press [PAUSE F] once.
“I” will flash.
To resume recording:
Press [REC I] or press [PAUSE F] again.
“I” will reappear.
To stop recording, press [STOP C].
Playback
Preparing for DV to VCR dubbing:
• Insert a recordable cassette tape and make sure your
DVC is in video mode.
Press the PLAY button or the PAUSE
button on your DVC to resume the
playback.
Recording
SE-R0294
Press [REC I] to start recording.
Disc
Management
REV
Press the PLAY button on your DVC
to find where you wish to start
dubbing. Then, press the PAUSE
button on the DV camcorder when
you come to the desired start point.
Basic Setup
CLEAR
1
2
3
4
Repeat the steps 1 and 2 on page 58.
Connections
Before recording from DVC, refer to page 55 for
connection instructions.
This DVC to VCR dubbing is available only for audio /
video out connection and not available for S-video,
component or HDMI connection. (Refer to
“Information on VCR Functions” on page 111).
Note for DV dubbing
VCR Function
Others
E9SK0UD_DVR670KU_EN_v1.1.indd 59
Function Setup
EN
Editing
• If you press [PAUSE F] at step 5 in “DVC to DVD Dubbing” on page 58, the tape will rewind to the point a few
seconds preceding the paused point. When you press [ENTER] at step 6 in “DVC to DVD Dubbing” on page 58, then,
it will start dubbing when it comes to the paused point.
• The unit does not send out the output signal to DVC.
• For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.
• Do not connect more than 1 DVC.
• The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.
• If no video signal is detected from the DVC during DVC to DVD dubbing, the recording will be paused and “I” will
flash on the TV screen. The recording will resume when the unit detects the video signal again.
• When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 57.
• You cannot dub from DVC during timer standby mode.
• You cannot dub from DVC to the both DVD and VCR at the same time.
• You cannot change the output mode during DVC to VCR dubbing. If you want to switch to the DVD mode, stop
the VCR first.
• During DVC to VCR dubbing, you cannot change channels while paused.
• When output is in DVD mode while playing back a DVD using L3 (DV-IN), you cannot switch to the VCR mode.
• If you are using anything other than L3 (DV-IN) to playback DVD, you can switch to the VCR mode, but cannot
select L3 (DV-IN) channel. (You can select L3 (DV-IN) after switching to the DVD mode during VCR playback.)
• During timer standby of either component, you cannot select L3 (DV-IN) even on the component which is not in
timer standby.
• Date / time and cassette memory data will not be recorded.
• Pictures with a copy-guard signal cannot be recorded.
• A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire
Wire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (registered trademark
of SONY). It enables digital dubbing between DV devices with little degradation.
59
2009/04/03 15:38:23
DVD/VCR DUBBING
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the
DVD or the cassette tape is not copy protected.
Before starting this function, prepare for the recording on
the DVD-RW/-R or the cassette tape. Refer to pages 45
and 111.
Make sure:
• Insert a recordable disc and a cassette tape with an
erase-protection tab.
Note for recording to a cassette tape:
• The cassette tape's erase-protection tab is intact.
• The remaining time of the cassette tape is long enough.
Note for recording to a disc:
• Make sure that the disc is recordable. Refer to page 9.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SETUP
“General Setting” menu will appear.
Use [K / L] to select “Recording”,
then press [ENTER].
“Recording” menu will appear.
Use [K / L] to select “Dubbing
Mode”, then press [ENTER].
Selection menu will appear.
CH
TIMER
PROG.
SPACE
DTV/TV
1
2
3
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
DISPLAY
DISC MENU
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
SE-R0294
60
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 60
2009/04/03 15:38:24
VCR to DVD
4
DVD
VCR
Press [SETUP] to exit.
Press [VCR].
• Since it takes about a few seconds before the
actual dubbing begins, please allow extra 5
seconds when selecting the starting point.
Press [DUBBING].
VCR to DVD duplication will start.
Press [SETUP] to exit.
Press [DVD].
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
Press [VCR], then press [REC MODE]
repeatedly to select the desired
recording mode.
Press [DUBBING].
DVD to VCR duplication will start.
Press [STOP C] to stop the recording.
Playback
Press [STOP C] to stop the recording.
DVD
VCR
Recording
Press [DVD], then press [REC MODE]
repeatedly to select the desired
recording mode.
Dubbing Mode
VCR
DVD
5
6
7
8
9
VCR”,
Disc
Management
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
Use [K / L] to select “DVD
then press [ENTER].
Basic Setup
7
8
9
DVD”,
Dubbing Mode
VCR
DVD
5
6
DVD to VCR
Connections
4
Use [K / L] to select “VCR
then press [ENTER].
Introduction
DVD/VCR DUBBING
Title list will automatically appear.
• If you want to watch the duplicated material
after the VCR to DVD duplication, press [TOP
MENU] first then press [ENTER] twice.
Editing
Note
Others
E9SK0UD_DVR670KU_EN_v1.1.indd 61
VCR Function
EN
Function Setup
• You cannot change the output mode during VCR to DVD or DVD to VCR duplication.
• When “L3 (DV-IN)“ is selected as input, dubbing cannot be performed. Dubbing can be performed with either L1
or L2 inputs.
For DVD to VCR duplication:
• This function is available on Audio CD, not MP3, WMA, JPEG nor DivX® files.
• The recording mode for VCR cannot be displayed at step 7 when using HDMI / Component / S-Video connection.
To display the VCR recording mode on the screen, the unit must be connected by the VIDEO OUT jack and the TV’s
input select should be set to the appropriate external input channel.
For VCR to DVD duplication:
• After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function.
This is not a malfunction. Be advised to playback the cassette tape until the picture is stabilized, then set the
starting point where you wish to start recording, and start VCR to DVD duplication.
• The playback sound mode is followed by the setting of VCR playback sound mode on page 113. Set the playback
sound mode to which you wish to record to the DVD.
• This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR
to DVD duplication.
• Dubbing indicator will appear on the front panel display during dubbing.
61
2009/04/03 15:38:27
INFORMATION ON PLAYBACK
Structure of Disc Contents
The contents of DVD are generally divided into titles, and the titles are subdivided into chapters.
Audio CDs are divided into tracks.
Data disc contains MP3/WMA/JPEG/DivX® are divided into folders, and the folders are subdivided into files.
DVD
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
Title:
Chapter:
Track:
Folder:
Divided contents of a DVD video. Roughly
corresponds to a story title in short stories.
Divided contents of a title. This corresponds to
a chapter in a story.
Divided contents of an audio CD.
Divided contents of a MP3/WMA/JPEG/DivX®
data disc. Consists of number of files.
Audio CD
Track 1
Track 2
folder 1
file 1
62
Track 3
Track 4
Track 5
Each title, chapter, or track, folder or file is assigned a
number, which is called “title number”, “chapter number”,
“track number”, “folder number” or “file number”
respectively.
Some discs may not have these numbers.
MP3/WMA/JPEG/DivX®
folder 2
file 2
file 3
file 4
file 5
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 62
2009/04/03 15:38:28
Introduction
BASIC PLAYBACK
Direct Playback
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
Press [DVD].
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
DISPLAY
DISC MENU
AUDIO
Align the disc to
the disc tray guide.
TOP MENU
ENTER
CLEAR
RETURN
REV
PLAY
FWD
SKIP
STOP
SKIP
VCR
DVD
DUBBING
REC MODE
REC
ZOOM
Press [PLAY B] to start playback.
If you are playing back a DVD-video, a menu
may appear.
Refer to “Using the Title/Disc Menu” on page 68.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 69.
Editing
SE-R0294
It may take awhile to load
the disc completely.
Playback
PAUSE
3
4
5
Press [OPEN/CLOSE A] to close the
disc tray.
Recording
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REPEAT TIMER SET SEARCH
Disc
Management
SETUP
Turn on the TV and be sure to select the input to
which the unit is connected.
TIMER
PROG.
SPACE
DTV/TV
1
2
Basic Setup
INPUT
SELECT
Connections
OPEN/
CLOSE
Press [I/y
y ON/STANDBY].
Function Setup
VCR Function
Note
Others
• Some discs may start playback automatically.
• Playback will stop when you change the output
mode.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 63
63
2009/04/03 15:38:28
BASIC PLAYBACK
Playback from the Title List
2
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
DISC MENU
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
AUDIO
TOP MENU
Align the disc to
the disc tray guide.
3
Press [OPEN/CLOSE A] to close the
disc tray.
It may take awhile to load
the disc completely.
Title list will appear automatically.
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
4
5
Press [TOP MENU].
Title list will appear.
Press [DISC MENU] to switch Original/Playlist if
necessary.
• To exit the title list, press [STOP C].
• To resume the title list, press [TOP MENU].
Use [K / L / { / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
ORG
REPEAT TIMER SET SEARCH
Title List
JAN/ 1/09 1:00AM CH10 SP
1:00AM (0:12:00)
JAN/ 1/09
ZOOM
SE-R0294
CH10 SP
1
2
3
4
5
6
1/6
Press [I/y
y ON/STANDBY].
1
Turn on the TV and be sure to select the input to
which the unit is connected.
Press [DVD].
Note
• You can also start playback by pressing [PLAY B]
instead of [ENTER] at step 5 on this page.
• At step 4, you can press [SKIP G], or press [B]
when the title on the lower right of the title list is
highlighted to display the next page, and press
[SKIP H], or press [{] when the title on the upper
left of the title list is highlighted to display the
previous page.
64
6
Use [K / L] to select “Play From
Start”, then press [ENTER].
Play From Start
Edit
Title Delete
Add To Playlist
Playback will start.
7
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 69.
To eject the disc, press [OPEN/CLOSE A] to
open the disc tray, then remove the disc before
turning off the unit.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 64
2009/04/03 15:38:30
Introduction
BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW/-R with MP3/WMA/JPEG Files
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
DISPLAY
DISC MENU
MENU
DISC
AUDIO
TOP MENU
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
DVD
Follow steps 1 to 2 in “Direct
Playback” on page 63.
Press [OPEN/CLOSE A] to close the
disc tray.
e.g.) JPEG File List
File List
DISC NAME
A
B
JPEG file1
JPEG file2
JPEG file3
JPEG file4
JPEG file5
JPEG file6
EN
Others
You must obtain any required permission from
copyright owners to download or use copyrighted
content. Toshiba cannot and does not grant such
permission.
1/ 2
E9SK0UD_DVR670KU_EN_v1.1.indd 65
This DVD Video Recorder requires discs/recordings to
meet certain technical standards in order to achieve
optimal playback quality. There are many different types
of recordable disc formats (including CD-R containing
MP3/WMA files). Not all recordable discs will operate or
produce optimal playback quality. The technical criteria
set forth in this owner's manual are meant only as a
guide. Use of CD-RW for MP3 files is not recommended.
VCR Function
3
Use [K / L] to select a desired folder
or track/file, then press [ENTER].
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
• Files whose extension is other than “.mp3(MP3)”
“.wma(WMA)” or “.jpg / .jpeg(JPEG)” will not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back on this unit.
• The JPEG pictures can also rotate by using [s / B].
Function Setup
When an audio CD is inserted, track list will appear.
When you insert a CD-RW/-R mixed with MP3/
WMA/JPEG files, the playback media selection
screen will be displayed.
For MP3/WMA, select “Music”, for JPEG, select
“Photo”.
When a CD-RW/-R with MP3/WMA/JPEG files is
inserted, file list will appear.
• To exit the file list, press [STOP C].
• To resume the file list, press [TOP MENU].
• Press [DISC MENU] to call up the playback media
selection screen in stop mode.
Note
Editing
It may take awhile to load
the disc completely.
Playback
1
2
VCR
It is recommended that files to be played back in this
unit are recorded under the following specifications:
<MP3 / WMA>
• Sampling frequency
: 44.1 kHz or 48 kHz.
• Constant bit rate
: 112 kbps - 320 kbps (MP3),
48 kbps - 192 kbps
(WMA).
<JPEG>
• Upper limit
: 6,300 x 5,100 dots.
• Lower limit
: 32 x 32 dots.
• File size of image maximum : 12 MB.
Recording
REV
Hints for audio CD tracks and MP3 / WMA / JPEG files:
• Folders are shown by
.
.
• Audio CD tracks are shown by
• MP3 files are shown by 3 .
• WMA files are shown by W .
.
• JPEG files are shown by
• The system can recognize up to 255 folders and, up to
99 tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “…”.
• If there are no files in the folder, “No Files” will be displayed.
Disc
Management
ENTER
CLEAR
When selecting folder:
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [ENTER].
• Press [PLAY B], [ENTER] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN] to move back to the previous
hierarchy.
Basic Setup
SETUP
CH
TIMER
PROG.
SPACE
DTV/TV
When selecting track/file:
Playback will start.
Connections
OPEN/
CLOSE
65
2009/04/03 15:38:34
BASIC PLAYBACK
Playing Back a DivX®
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
DTV/TV
SETUP
1
2
DISPLAY
DISC MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
SE-R0294
ZOOM
Press [OPEN/CLOSE A] to close the
disc tray.
It may take awhile to load
the disc completely.
File list will appear automatically.
• To exit the file list, press [STOP C].
• To resume the file list, press [TOP MENU].
AUDIO
TOP MENU
Follow steps 1 to 2 in “Direct
Playback” on page 63.
3
Use [K / L] to select the desired
folder or file, then press [ENTER].
File List
DISC NAME
Folder1
Folder2
DivX File1
DivX File2
When selecting file:
Playback will start.
When selecting folder:
The files in the folder will appear.
Use [K / L] to select the file you want to play back, then
press [ENTER].
• Press [PLAY B], [ENTER] or [B] to move to any lower
hierarchy.
• Press [s] or [RETURN] to move back to the previous
hierarchy.
DivX® subtitle
The subtitle created by the user can be displayed
during DivX® playback.
1) After selecting the DivX® file, the “Subtitle List”
menu will appear when “DivX Subtitle” is set to
anything other than “OFF”. (Refer to page 107.)
2) Use [K / L] to select the extension you want to
display, then press [ENTER].
Subtitle List
DivX File1
OFF
SMI
SRT
SUB
ASS
SSA
TXT
DivX® with the subtitle starts playback. The subtitle
cannot be displayed when the setting is “OFF”.
• If there is more than one extension, the extension
selection appears in the subtitle list.
66
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 66
2009/04/03 15:38:38
Playing Back a DivX® (cont’d)
R
Playback
Editing
Function Setup
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 67
Recording
Note for DivX® subtitle
• To utilize this function, the
following conditions must meet.
– “DivX Subtitle” must be activated in “DivX” menu. (Refer to
“DivX Subtitle” on page 107.)
– Playback file and the subtitle file must have the same name.
– Playback file and the subtitle file must locate in the same
folder.
– Only the subtitle files with the following extensions are
supported; .smi (.SMI), .srt (.SRT), .sub (.SUB) .ass
(.ASS), .ssa (.SSA), .txt (.TXT).
(.sub (.SUB) and .txt (.TXT) files may not be recognized.)
– The subtitles that exceeds the playback time of the DivX® file
will not be displayed.
Disc
Management
• If DivX® files written on a CD-RW/-R cannot be played back,
rewrite them on a DVD-RW/-R or DVD+RW/+R and try to play
back.
Title List
• For more information for DivX®,
Video Files
please visit
Music
Photo
http://www.divx.com.
• If you insert a CD-RW/-R with
DivX® files that are mixed with
MP3/WMA/JPEG files, the
playback media selection screen
will be displayed. Please select
“Video Files” and proceed to next step.
• Press [DISC MENU] to call up the Title List in stop mode.
• If you select “Music” instead of “Video Files” on Title List, this
unit can play back MP3/WMA files.
• If you select “Photo” instead of “Video Files” on Title List, this
unit can play back JPEG files.
• Some DivX® files cannot be played back on this unit due to the
configuration and characteristics of the disc, or due to the condition of
recording and authoring software.
• You cannot play back the
DivX® VOD files obtained with
different registration codes on
Authorization Error
this unit. Press [TOP MENU]
This player is not authorized to
play this video.
and select other files that can
Please push 'TOP MENU'.
be played back.
Basic Setup
Note for DivX®
• DivX® is a codec (compression/decompression) that can
compress images to a very small amount of data. The
software can compress video data from almost any devices to
the size that can be sent on the Internet without
compromising visual quality of the images.
• A file with an extension of “.avi” and “.divx” is called an DivX®
file. All files with the “.avi” extension are recognized as
MPEG4.
• Files whose extension other than “.avi” and “.divx” will not be
listed on the DivX® menu. However, unplayable folders and
files may be displayed, depending on the recording
conditions.
• Even if the file has an extension of either “.avi” and “.divx”,
this unit cannot play it back if it is recorded in the format
other than DivX®.
• A symbol of
is shown on the top of the file name.
• A maximum of 255 folders or 999 files may be recognized in a
disc.
• Up to 8 hierarchies can be recognized in a folder. Files in the
9th or deeper hierarchies cannot be played back.
• If there are more than 9 files, a down arrow “ ” appears,
indicating that the user can view another part on the
previous page. The current page number and the number of
total pages are shown on the bottom of the screen.
• Letters of a file/folder name overflowing the given space will
be displayed as “…”.
• You can play back the disc recorded in multi-session.
• It may take awhile for audio and images to be output after
you inserted a disc and pressed [PLAY B].
• When playing back the files recorded in high bit rates, the
images can be interrupted in some occasions.
• Although DivX® logo has been obtained for this unit, it may
not be able to play back some data, depending on the
characteristics, bit rates, or audio format settings, etc.
• A DivX® file whose file size exceeds 2 GB cannot be played
back.
• If a large-sized DivX® file is selected, it may take awhile to
start the playback (over 20 seconds sometimes).
• If you try to playback the DivX® file that has the screen
resolution which this unit does not support, the playback will
be stopped and error message will appear.
• Some DivX® VOD files are
restricted with the limited
DivX VOD Rental
playable times (you cannot
This rental has
views left.
play them back beyond the
Do you want to use one
of your views now?
limit). If your DivX® VOD file
No
Yes
has such limit, the playback
confirmation screen will
appear.
Use [s / B] to select “Yes” if you want to play back the
file, or to select “No” if you do not wish to play it back.
Then, press [ENTER] to
confirm the selection.
• You cannot play back the
Rental Expired
This rental is expired.
DivX® VOD files, of which
Please push ‘TOP MENU’.
rental period has been
expired. In such case, press
[TOP MENU] and select other
files that can be played back.
Connections
It is recommended that files to be played back in this
unit are recorded under the following specifications:
Official DivX® Certified product
• Playable codec of AVI files : DivX®3.x, DivX®4.x,
DivX®5.x, DivX®6.0
• Maximum size of image
: 720 x 480 @30 fps
720 x 576 @25 fps
• Sampling frequency of audio : 8 kHz - 48 kHz
• Audio type
: MPEG1 audio layer 3(MP3),
MPEG1 audio layer 2,
Dolby Digital
Hint for the purchased or rental official DivX®
Certified product
• When you purchased or rental a DivX® file through the
official site of DivX® video which is called DivX® VideoOn-Demand (VOD) services, a registration code is
required every time you get the new file from the DivX®
VOD services. Refer to “DivX® VOD” on page 107.
Introduction
BASIC PLAYBACK
67
2009/04/03 15:38:40
BASIC PLAYBACK
Using the Title/Disc Menu
DVD may contain a title list, which describes the contents
of the disc, or a disc menu, which guides you through the
available functions in the disc.
Press [DVD] first.
1) Press [TOP MENU] or [DISC MENU] to call up the
title list or disc menu.
Pause
Press [DVD] first.
1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2) Use [K / L / { / B] to make a selection, and then
press [ENTER] to enable your selection.
F
3) Press [STOP C] to exit the disc menu.
Note
• You can select a numbered menu with [the Number
buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• [DISC MENU] or [TOP MENU] will not always be
effective for all DVDs.
68
2) Press [PLAY B] to return to the normal playback.
Note
• For DVD/DivX® files, set “Still Mode” to “Field” in
“Playback” menu if pictures in the pause mode are
blurred. (Refer to page 102.)
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 68
2009/04/03 15:38:42
Resume Playback
Resume ON
You can skip TV commercials to enjoy the recorded
programs without interrupting.
Press [DVD] first.
During playback, press [INSTANT SKIP].
Normal playback will start at 30 seconds ahead from
where you press [INSTANT SKIP].
Every time you press [INSTANT SKIP], the searching
point will be extended by 30 seconds ahead.
You can press [INSTANT SKIP] up to 6 times (180 seconds).
e.g.) Press [INSTANT SKIP] once.
Basic Setup
Disc
Management
2) Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn the unit into the
standby mode.
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
Skipping TV Commercials During
Playback
Connections
You can play back from where you stopped playing back
the disc last.
Press [DVD] first.
1) During playback, press [STOP C].
The resume message will appear.
Introduction
SPECIAL PLAYBACK
Note
• For MP3/WMA/JPEG files, playback will resume from
the beginning of the file at which playback was
stopped.
Instant Skip 30sec.
(forwarding 30 seconds)
REV
20x
REV
FWD
5x
REV
FWD
normal
speed
playback
REV
FWD
2x
REV
B
Playback will return to the normal playback.
FWD
20x
REV
Editing
40x
FWD
Playback
Press [DVD] first.
1) During playback, press [FWD D] or [REV E].
Every time you press [FWD D] or [REV E],
approximate speed will be changed as follows.
Fast forward or fast reverse playback across titles (for
DVD), or files (for MP3 / WMA / DivX® files) is not
possible.
FWD
Recording
Fast Forward / Fast Reverse Playback
40x
Function Setup
For audio CD, MP3/WMA files, approximate speed is
fixed at 8x with sound.
Picture quality of DivX® files in fast reverse is lower
than that in fast forward.
For some DivX® files, fast forward/fast reverse may not
function.
2) Press [PLAY B] to return to the normal playback.
Note
VCR Function
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 69
69
2009/04/03 15:38:43
SPECIAL PLAYBACK
Rapid Playback
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound output.
Press [DVD] first.
1) During playback, press [1.3X / 0.8X PLAY].
B x0.8 : Press [1.3X / 0.8X PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B x1.3 :
Press [1.3X / 0.8X PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
B:
Press [1.3X / 0.8X PLAY] thrice to play back in
normal speed.
No effects.
2) Press [PLAY B] to return to the normal playback.
Note
• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is LPCM (2 channel) during rapid playback.
Step by Step Playback
Slow Forward / Slow Reverse Playback
Press [DVD] first.
1) During playback, press [PAUSE F]. Then press
[FWD D] or [REV E].
Every time you press [FWD D] or [REV E],
approximate speed will be changed as follows. (The
sound will remain muted.)
FWD
1/4x
REV
FWD
1/8x
REV
FWD
1/16x
REV
FWD
pause
REV
FWD
1/16x
REV
FWD
1/8x
REV
1/3x
2) Press [PLAY B] to return to the normal playback.
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
1/16x:
1/8x:
1/3x:
reverse (approx. speed)
1/16x:
1/8x:
1/4x:
• For some DivX® files, slow forward/slow reverse may
not function.
• Only slow forward is available when playing back
DivX® files.
Press [DVD] first.
1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2) Press [SKIP i ] repeatedly.
Playback will advance one frame at a time when you
press [SKIP i ] with the sound muted.
To play back step by step backward:
Press [SKIP j ] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [SKIP j ] / [SKIP i ] to reverse/
advance continuously.
3) Press [PLAY B] to return to the normal playback.
Note
• Only step by step forward playback is available for
playing back DivX® files.
70
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 70
2009/04/03 15:38:47
Introduction
SPECIAL PLAYBACK
Marker Setting
Zoom
1/ 5
to display the selection
1/ 5
0:01:00 / 1:23:45
2) Use [{ / B] to select
e.g.) DVD-video
to display the marker list.
DVD Video
1/ 5
1/ 5
Basic Setup
2) Use [{ / B] to select
menu.
e.g.) DVD-video
This feature allows you to assign a specific point on a disc
to be called back later.
Press [DVD] first.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
Connections
Press [DVD] first.
1) During playback, press [DISPLAY] or [ZOOM].
• If you press [ZOOM], skip to step3.
0:01:00 / 1:23:45
DVD Video
Disc
Management
3) Use [K / L] to select a desired zoom factor to zoom,
then press [ENTER].
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select a desired marker number.
When it reaches the desired point, press [ENTER].
× 1.2
× 1.5
× 2.0
1/ 5
1/ 5
2
3
4
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
6
-------------
The title (track) number and the time will be displayed.
4) To return to the marker:
Use [K / L] to select the desired marker number,
then press [ENTER].
Editing
Note
Note
• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
– Turning the unit into the standby mode
– Recording on a recordable disc
• You can mark up to 6 points.
Function Setup
Zoom playback will start.
Playback
4) Use [K / L / { / B] to select a desired zoom
position, then press [ENTER].
5
Recording
DVD Video
1
Zoom area will be displayed.
0:01:00 / 1:23:45
VCR Function
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [RETURN] repeatedly.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [ENTER] at step 3.
• You cannot slide the zoomed picture on some JPEG
files.
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 71
71
2009/04/03 15:38:51
SPECIAL PLAYBACK
Chasing Playback during Recording
You can play back the already recorded part of the
currently recording program without waiting for the
recording to the end. This function works from 1
minute after the start of the recording.
1) During recording, press [PLAY B].
Playback will start from the beginning of the program
that you are currently recording.
Screen for the current playback:
6/ 6
1/ 1
0:01:00 / 1:23:45
-RW
VR
LP
ORG
1:01
If you play back the fast forward playback and the
playback reaches the scene recorded 1 minute before,
the forwarding playback will automatically return to
the normal playback.
2) Press [STOP C] once to stop playback.
The resume message will appear.
Screen for the current recording:
6
1
1:23:45
-RW
VR
ORG
CH 10
Resume ON
LP
1:01
Using [TIME SLIP] ...
With [TIME SLIP], even if you leave your couch while
you are watching TV through this unit, you can come
back and watch rest of the program from right where
you left at any convenient time with just one button.
Please make sure to put VR mode DVD-RW disc, and set
the recording mode to LP, EP or SLP.
1) While viewing a TV broadcast via this unit, press
[TIME SLIP].
This unit start to record the TV broadcast.
2) Press [TIME SLIP] again.
Playback will start from the point at which you press
[TIME SLIP] first while recording continues.
• While viewing the recorded content, you can pause
and resume the playback by pressing [TIME SLIP].
3) Press [STOP C] once to stop playback.
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
Note
• Playback image may freeze momentarily using this
function.
However, this does not affect the recording.
• The 2x fast forward playback is not available.
• [REC I] is not available during this function.
• You must cancel this function first by pressing
[STOP C] once. Then you can use [REC I] to use
OTR (one-touch timer recording) function or change
recording time for the OTR.
• “Wait for a moment.” will be displayed on the screen
if you press [PLAY B] before 1 minute of recording.
• This function is available only when you are
recording on a DVD-RW in VR mode, with the
recording mode LP, EP or SLP.
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
72
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 72
2009/04/03 15:38:55
Introduction
SPECIAL PLAYBACK
Simultaneous Playback and Recording
3) Press [STOP C] once to stop playback.
The resume message will appear.
Screen for the current recording:
1) During recording, press [DISPLAY].
Screen for the current recording:
3
1
Connections
You can also play back a recorded title during current
recording or the timer recording on the same disc.
1:30:25
-RW
VR
ORG
CH 10
3
1
1:23:45
VR
ORG
Basic Setup
-RW
CH 10
Resume ON
2) Select
icon using [{ / B], then press [ENTER].
will be highlighted.
The title number next to
If you play back the currently recording program and the
playback reaches the scene recorded 1 minute before,
the forwarding playback will automatically return to the
normal playback.
Note
• Playback image may freeze momentarily using this
function.
However, this does not affect the recording.
• The 2x fast forward playback is not available.
• This function is available only when you are
recording on a DVD-RW in VR mode, with the
recording mode LP, EP or SLP.
• Only the titles (chapters) in the original can be
selected.
You cannot select titles from the title list.
• When you stop the playback after the timer
recording is completed, the unit will be switched to
the timer standby mode if another program has been
set (refer to “Hints for Timer Recording” on page 54).
Playback
Selected chapter playback will start.
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
Recording
Chapter:
for chapter, press [B].
To move to
Enter a desired chapter number to search using
[K / L] or [the Number buttons], then press
[ENTER].
1:01
Disc
Management
Title:
Enter a desired title number to search using
[K / L] or [the Number buttons], then press
[ENTER].
Selected title playback will start.
LP
Editing
Function Setup
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 73
73
2009/04/03 15:38:56
SEARCH
Title/Chapter Search
Track Search
Using [SKIP j ] / [SKIP i ]
Using [SKIP j ] / [SKIP i ]
Press [DVD] first.
1) During playback, press [SKIP i ] to skip the
current title or chapter and move to the next.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will
be skipped.
Press [DVD] first.
1) During playback, press [SKIP i] to skip the
current track/file and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [SKIP j ].
(For JPEG files, press it once to go to the previous file.)
Press it twice in quick successions to go to the previous
track/file. The track/file will move backward one at a
time.
To go back to the beginning of the current title or
chapter, press [SKIP j ].
Press it twice in quick successions to go to the previous
title or chapter. The title or chapter will move
backward one title at a time.
Using [DISPLAY]
Press [DVD] first.
1) During playback, press [DISPLAY].
Press [DVD] first.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2) Use [{ / B] to select
e.g.) DVD-video
2) Use [{ / B] to select
e.g.) audio CD
Using [DISPLAY]
1/ 5
, then press [ENTER].
1/ 5
0:01:00 / 1:23:45
1/ 5
, then press [ENTER].
0:00:15 / 0:05:00
DVD Video
The number next to
will be highlighted.
3) Title:
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [ENTER].
Title search will start.
Chapter:
for
Press [B] to move to the number next to
chapter.
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press
[ENTER].
After the search, playback will start automatically.
Note
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
1/ 5
1/ 5
CD
e.g.) MP3 files
1/ 5
0:00:15
MP3
The number next to
will be highlighted.
3) Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[ENTER].
After the search, playback will start automatically.
Note
• During CD playback, you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
0:01:00 / 1:23:45
DVD Video
total number
total time
of titles
of the title
total number
of chapters
74
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 74
2009/04/03 15:38:57
Introduction
SEARCH
Time Search
Connections
Press [DVD] first.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2) Use [{ / B] to select
e.g.) DVD-video
1/ 5
Basic Setup
1/ 5
, then press [ENTER].
0:01:00 / 1:23:45
DVD Video
1/ 5
Disc
Management
e.g.) audio CD
0:00:15 / 0:05:00
CD
When time search is not available,
counter are not displayed.
Recording
The number next to
will be highlighted.
To move to the number next to
, press [B].
and time
Playback
3) Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [ENTER].
After the search, playback will start automatically.
Note
• Time search is available only in the same track, file or
title.
Editing
Function Setup
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 75
75
2009/04/03 15:39:01
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Repeat Playback
Available repeat function may vary depending the discs.
Press [DVD] first.
1) During playback, press [DISPLAY] or [REPEAT] to
bring up the display menu.
If the display menu is already shown, skip to step 2.
• If you press [REPEAT], skip to step 3.
2) Use [{ / B] to select
menu.
1/ 5
to display the selection
1/ 5
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select a desired option to repeat,
then press [ENTER].
The selected repeat playback will start.
e.g.) DVD-video
OFF
Title
Chapter
A-B
e.g.) audio CD
OFF
Track
All
A-B
Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [ENTER].
2) Press [ENTER] at the desired starting point A.
3) Press [ENTER] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
Note
• Point B for the repeat A-B playback should be set
within the same title or track of point A.
• To cancel the repeat playback, select “OFF” at step 3. The
repeat setting will also be canceled when you stop playback.
• You cannot select “Group” during the random
playback of MP3/WMA/JPEG files.
• For some DivX® files, A-B repeat playback may not
function.
• Chapter/Track repeat will be canceled whenever a
Chapter/Track is skipped forward or backward.
• During the A-B repeat, if you reaches the point A
with any reverse playback, the reverse playback will
be canceled and the A-B repeat playback resumes
from point A.
Random Playback
e.g.) MP3/WMA/JPEG files
OFF
Track
All
Group
e.g.) DivX® files
OFF
Track
All
Group
A-B
You can play back a disc randomly instead of playing
back in the original order.
Press [DVD] first.
1) Press [SETUP] in stop mode.
2) Use [K / L] to select “DISC Playback Mode”, then
press [ENTER].
“DISC Playback Mode” menu will appear.
For MP3/WMA, use [K / L] to select “Music”, then press
[ENTER].
For JPEG, use [K / L] to select “Photo”, then press
[ENTER].
3) Use [K / L] to select “Random Play”, then press
[ENTER].
Random playback will start.
e.g.) audio CD
1/ 5
0:00:15 / 0:05:00
CD
Random
Note
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the
display menu.
76
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 76
2009/04/03 15:39:03
Program Playback
Introduction
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Slide Show
3) Use [K / L] to select “Program Play”, then press
[ENTER].
3) Use [K / L] to select “Slide Show”, then press
[ENTER].
4) Use [K / L] to select the display time, then press
[ENTER].
Disc
Management
4) Use [K / L] to select a desired track, then press
[ENTER] or [B].
2) Use [K / L] to select “Photo”, then press [ENTER].
Basic Setup
2) Use [K / L] to select “DISC Playback Mode”, then
press [ENTER].
“DISC Playback Mode” menu will appear.
You can select the display time between 5 seconds and
10 seconds.
Press [DVD] first.
1) Follow steps 1 and 2 in “Program Playback” on the
left.
5) Press [SETUP] to exit.
DISC Playback Mode
Program Play
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total
Note
• Large-size JPEG files take a few moments to be
displayed.
Recording
--
Connections
You can program the disc to play back in your desired
order.
Press [DVD] first.
1) Press [SETUP] in stop mode.
0:00:00
Repeat this step until you program all the desired
tracks.
5) Press [PLAY B].
Playback
DISC Playback Mode
Program Play
09
04
10
06
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Editing
Total
0:31:07
Program playback will start.
Note
Function Setup
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• You may also select a desired track using [the
Number buttons] at step 4.
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 77
77
2009/04/03 15:39:05
SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
DVD-video may have subtitles in one or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages during playback.
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
menu.
e.g.) DVD-video
1/ 5
to display the selection
1/ 5
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select a desired subtitle language,
then press [ENTER].
1/ 5
1/ 5
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back audio CD, you can switch “L/R”(stereo),
“L”(left) or “R”(right).
Press [DVD] first.
1) During playback, press [DISPLAY] or [AUDIO ] to
bring up the display menu.
If the display menu is already shown, skip to step 2.
• If you press [AUDIO ], skip to step 3.
0:01:00 / 1:23:45
DVD Video
2) Use [{ / B] to select
menu.
to display the selection
3) Use [K / L] to select a desired audio soundtrack or
audio channel, then press [ENTER].
For DVD-video, VR mode DVD-RW, or DivX® files
• Audio soundtrack will switch.
e.g.) DVD-video
OFF
1.English
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
1.Dolby Digital 2ch English
2.Dolby Digital 5.1ch English
Subtitle will be displayed in the selected language.
When “OFF” is selected, subtitle will disappear.
Note
• Some discs will only allow you to change the subtitle
from the disc menu. Press [DISC MENU] or [TOP
MENU] to display the disc menu.
• If a 4-digit language code appears in the subtitle
menu, refer to the “LANGUAGE CODE” on page 118.
• For disc with DivX® files, the TV screen only displays
the number of subtitle languages and “- - - -“ next to
the numbers.
• If the title contains both main and sub audio, you can
further select “L“ (main), “R“ (sub), “L/R“ (mixed of
main and sub).
For audio CD
• Audio channel will switch.
e.g.) audio CD
1/ 5
0:00:15 / 0:05:00
CD
1. L/R
2. L
3. R
Note
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [DISC MENU]
or [TOP MENU] to display the disc menu.
78
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 78
2009/04/03 15:39:06
Switching Virtual Surround System
Switching Camera Angles
Some DVD-video have scenes shot from two or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
1/ 5
Connections
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
Press [DVD] first.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
Introduction
SELECTING THE FORMAT OF AUDIO AND VIDEO
, then press [ENTER].
1/ 5
0:01:00 / 1:23:45
Basic Setup
DVD Video
2) Use [{ / B] to select
menu.
e.g.) DVD-video
1/ 5
to display the selection
1/ 5
0:01:00 / 1:23:45
DVD Video
1/ 5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
• Angle icon does not appear on the TV screen if you
set “Angle Icon” to “OFF” in “Playback” menu.
Refer to page 102.
Recording
1/ 5
Note
Reducing Block Noise
• Select “OFF” if sound is distorted.
• The setting will be kept when the unit is turned off.
Playback
OFF
: no effect
Type 1 : natural effect
Type 2 : emphasized effect
Note
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
menu.
e.g.) DVD-video
1/ 5
to display the selection
1/ 5
Disc
Management
3) Use [K / L] to select “OFF”, “Type 1” or “Type 2”,
then press [ENTER].
e.g.) DVD-video
Angle icon appears when a switching camera angle is available.
Angle will switch each time you press [ENTER].
0:01:00 / 1:23:45
Editing
DVD Video
3) Use [K / L] to, select “Noise Reduction”, then press [ENTER].
1/ 5
0:01:00 / 1:23:45
DVD Video
Noise Reduction OFF
Black Level
OFF
4) Use [K / L] to select a desired option, then press [ENTER].
1/ 5
1/ 5
0:01:00 / 1:23:45
Function Setup
1/ 5
DVD Video
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 79
Others
Your setting will be activated.
This function reduces noise in the playback picture. If
noises appear on the TV screen during playing back
discs recorded in long time recording mode such as EP
or SLP, select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a few noises such as
DVD-video, select “OFF”.
VCR Function
OFF
Type 1
Type 2
79
2009/04/03 15:39:08
SELECTING THE FORMAT OF AUDIO AND VIDEO
Adjusting Black Level
You can adjust the black level to control the brightness
of the picture in order to get a better picture.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
menu.
e.g.) DVD-video
1/ 5
to display the selection
1/ 5
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select “Black Level”, then press
[ENTER].
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
Noise Reduction OFF
Black Level
OFF
4) Use [K / L] to select “OFF” or “ON”, then press
[ENTER].
Your setting will be activated.
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
OFF
ON
OFF
: Shows the original picture as recorded.
ON
: Make the darker parts of the picture more
visible.
Note
• You can adjust black level setting only during
playback.
• The setting will be kept even when the unit is turned
off.
• The default setting is “ON”.
80
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 80
2009/04/03 15:39:13
Guide to a Title List
Editing Discs
Press [TOP MENU].
4
5
6
Title List
JAN/ 1/09 1:00AM CH10 LP
1:00AM (2:00:00)
JAN/ 1/09
CH10 LP
2
3
4
5
6
1/2
2 1
ORG
3
Edit
2
Scene Delete
Edit Title Name
Chapter Mark
Protect
0 : 00 : 59
11 10
9
8
7
Function Setup
VCR Function
Others
Press [RETURN] to exit the title list.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 81
Editing
Using these editing functions to modify copyrighted
content for any purpose other than your private viewing
may be prohibited under the Copyright Laws of the
United States and other countries, and may subject you
to civil and criminal liability.
Playback
1. Title list: List of the titles recorded on the disc, and
their information.
• For DVD+RW/+R, empty title always appears at the
last of the title list.
• For the titles being blocked by the v-chip system
(except the downloaded ratings), “BLOCK” will be
displayed and you cannot watch the contents.
2. The protect icon: Appears when the title has been
protected. (Original titles only)
3. Arrow: Indicating there is a previous / next page.
4. Title list icon: Indicates a type of the displayed title
list.
+VR : +VR mode
ORG : VR (Original)
PL : VR (Playlist)
Video : Video mode
5. Title name
6. Title information: Displays various information on
the selected title.
7. Submenu: Submenus for the selected menu are
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time, channel and the recording
mode are displayed here.
9. Progress bar: Indicating the progress of the playback.
The vertical lines in the bar indicates chapter marks,
and “L” sliding on the bar indicates current point of
playback displayed in the preview window.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.
Recording
JAN/31/09 11:00PM CH13 LP
Disc
Management
3
You will find editing discs is easy. This unit offers
convenient edit functions which are possible only with
DVD-RW/-R and DVD+RW/+R.
You can edit the following from a title list.
• Assigning a name to a title
• Dividing a title
• Combining titles
• Adding titles to a playlist
• Erasing all playlist
• Setting or releasing the title protection
• Adding or deleting chapter marks
• Deleting titles or parts of titles
(Possible editing functions depend on the recording
format and editing method.)
Original and playlist (VR mode)
For VR mode DVD-RW, you can edit the recordings in
playlist without changing the original recordings. Playlist
does not take up much disc space. After you make a
recording to VR mode DVD-RW, a playlist will be created
automatically.
What “Original” or “Playlist” is for?
Throughout this manual, you will find original and playlist
which refer to the actual content and the edited version.
• Original content refers to what’s actually recorded on
the VR mode DVD-RW.
• Playlist content refers to the edited version of the VR
mode DVD-RW; how the original content is to be played
back.
Finalizing a disc
• This will allow a disc that is recorded on this unit to be
played back on other DVD player — without finalization
it will not be playable on other DVD player.
• After finalizing a DVD-RW/-R or DVD+R, you cannot edit
any information that is on that disc.
• If you have recorded in DVD+RW, then editing is still
permitted after finalizing.
Basic Setup
1
Edit the recorded disc
Connections
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
ORG
Introduction
INFORMATION ON DISC EDITING
81
2009/04/03 15:39:15
DELETING TITLES
Notes for deleting titles
After the disc is fully recorded:
DVD-RW/DVD+RW
The Full-Recorded disc
TITLE 2
Deleted title
cannot create
the space.
TITLE 3
You cannot
record
a new title.
TITLE 2
TITLE 2
TITLE 2
TITLE 2
TITLE 3
You can record
a new title.
Delete!
TITLE 1
You can record
a new title.
TITLE 3
TITLE 1
TITLE 1
TITLE 3
Delete!
TITLE 1
Delete!
TITLE 1
Delete!
• When a title is deleted from
DVD-R and DVD+R, the
recordable space will NOT be
increased.
The Full-Recorded disc
TITLE 1
TITLE 1
TITLE 2
• When the last title is deleted from
DVD-RW in video mode or DVD+RW, the
recordable space will be increased.
TITLE 2
• When a title is deleted from
DVD-RW in VR mode, the
recordable disc space will
be increased.
The Full-Recorded disc
DVD-R/DVD+R
You cannot
record
a new title.
Once all editings are made, press [RETURN] several times to exit the editing mode. “Writing to Disc” appears
momentarily. It also appears when pressing [AOPEN/CLOSE] or [I/y ON/STANDBY] before exiting the editing
mode after editing.
Note
• If you delete the title in DVD+RW, deleted title will be displayed as “Empty”.
• You cannot overwrite on the “Empty”
• For DVD+RW, if “Empty” appears right next to the other “Empty”, those “Empty” combines into one.
+VR
Title List
+VR
JAN/21/09 7:00AM CH22 SLP
7:00AM (2:00:00)
JAN/21/09
Empty
SLP
1
2
3
4
5
6
Empty
1
1Delete the
title No.5
2
3
4
Empty
1/1
82
Title List
EMPTY TITLE
1/1
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 82
2009/04/03 15:39:16
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
Title list, original or playlist will appear.
• For VR mode DVD-RW, press [DISC MENU] to
switch between “Original” and “Playlist”.
Use [K / L/ s / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
ORG
Title List
JAN/ 1/09 1:00AM CH10 LP
1:00AM (2:00:00)
JAN/ 1/09
CH
Basic Setup
OPEN/
CLOSE
1
2
Press [DVD].
In stop mode, press [TOP MENU].
CH10 LP
1
2
3
4
5
6
Disc
Management
TIMER
PROG.
SPACE
1/2
DTV/TV
SETUP
DISPLAY
AUDIO
TOP MENU
DISC MENU
3
Use [K / L] to select “Title Delete”,
then press [ENTER].
4
Use [K / L] to select “Yes”, then press
[ENTER].
ENTER
RETURN
Play From Start
Edit
Title Delete
Add To Playlist
Recording
CLEAR
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
Delete this title?
Yes
No
Playback
REV
Connections
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
Be sure to read “Notes for deleting titles” on page 82 before
you delete the title.
Introduction
DELETING TITLES
ZOOM
SE-R0294
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
Writing to Disc
Function Setup
5
Editing
After that, “Are you sure?” will appear, select
“Yes” and then press [ENTER].
Title will be deleted.
90%
This operation may take
awhile to be completed.
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 83
83
2009/04/03 15:39:17
CREATING/DELETING PLAYLIST
Adding Titles to a Playlist
Playlist
For VR mode DVD-RW, you can create the playlist as you
wish.
You can add up to 99 titles to a playlist (as long as
the total number of the playlist does not exceed 999
chapters).
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
SETUP
4
Use [K / L] to select “Yes”, then press
[ENTER].
TIMER
PROG.
SPACE
DTV/TV
1
2
3
Follow the step 1 in “DELETING
TITLES” on page 83 to display the
original.
DISPLAY
DISC MENU
AUDIO
TOP MENU
Use [K / L/ s / B] to select the
desired title, then press [ENTER].
Use [K / L] to select “Add To
Playlist”, then press [ENTER].
Play From Start
Edit
Title Delete
Add To Playlist
Create a Playlist ?
Yes
No
ENTER
CLEAR
The title is added to playlist.
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
5
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
ZOOM
SE-R0294
Note
• To delete a title from the playlist, follow the steps in
“DELETING TITLES” on page 83.
• To delete all titles in the playlist, refer to “Erasing All
Playlist” on page 85.
• When a playlist contains 99 titles or more, or 999
chapters or more, “Add to Playlist” cannot be
selected.
84
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 84
2009/04/03 15:39:20
Introduction
CREATING/DELETING PLAYLIST
Erasing All Playlist
Playlist
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
SETUP
DISPLAY
4
Use [K / L] to select “DVD Menu”,
then press [ENTER].
Use [K / L] to select “Delete All
Playlists”, then press [ENTER].
DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete All Playlists
Disc
Management
DTV/TV
Use [K / L] to select “Yes”, then press
[ENTER].
TIMER
PROG.
SPACE
Main menu will appear.
Basic Setup
OPEN/
CLOSE
1
2
3
Connections
A playlist can be deleted if it is no longer needed.
Press [DVD].
Press [SETUP].
AUDIO
TOP MENU
DISC MENU
ENTER
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
Yes
No
“Are you sure?” will appear.
Use [K / L] to select “Yes” and then press
[ENTER].
Playback
PAUSE
Delete entire playlist?
Recording
CLEAR
DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete
play list?
Areentire
you sure?
Delete All Playlist
Yes
No
Playlist is deleted.
Data will be written onto the disc momentarily.
Function Setup
This operation may take
awhile to be completed.
Editing
SE-R0294
VCR Function
Note
Others
• Deleting a playlist will not increase the available
recording time on the disc.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 85
85
2009/04/03 15:39:22
EDITING DISCS
Putting Names on Titles
You can put a name on the title and change it from this
menu.
DTV/TV
SETUP
DISPLAY
DISC MENU
AUDIO
4
Use [K / L] to select “Edit Title
Name”, then press [ENTER].
ORG
Edit
1
TOP MENU
Scene Delete
Edit Title Name
Chapter Mark
Protect
ENTER
CLEAR
RETURN
JAN/ 1/09 1:00AM CH10 LP
1 : 25 : 47
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
5
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on page 87.
ORG
Edit - Edit Title Name
1
A B C
a b c
character set
1 2 3
REPEAT TIMER SET SEARCH
@ !
ZOOM
?
M
1 : 25 : 47
SE-R0294
area for entering title names
1
2
Press [DVD].
In stop mode, press [TOP MENU].
When you finish entering a title name, press
[ENTER].
Title list, original or playlist will appear.
• For VR mode DVD-RW, press [DISC MENU] to
switch between “Original” and “Playlist”.
Use [K / L] to select “Yes”, then press
[ENTER].
Use [K / L/ s / B] to select a desired
title, then press [ENTER].
6
ORG
Edit - Edit Title Name
1
Yes
No
e.g.) VR mode DVD-RW original
ORG
Title List
JAN/ 1/09 1:00AM CH10 LP
1:00AM (2:00:00)
JAN/ 1/09
MY FAVORITE
CH10 LP
1 : 25 : 47
1
2
3
4
5
6
The name you entered will be activated for the title.
1/2
3
Use [K / L] to select “Edit”, then press
[ENTER].
7
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
Play From Start
Edit
Title Delete
Add To Playlist
.
86
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 86
2009/04/03 15:39:24
Introduction
EDITING DISCS
Putting Names on Titles (cont’d)
Guide to Edit Title Name
INPUT
SELECT
HDMI
.@/:
ABC
DEF
Select
Press
GHI
MNO
TUV
abc
123
@!?
<space>
<space>
0
<space>
(*1)
(*1)
1
! ”# $ % & ’( )
*+,-./:;<=>
?@[]^_{|}
ABC
abc
2
-
DEF
def
3
-
GHI
ghi
4
-
JKL
jkl
5
-
MNO
mno
6
-
PQRS
pqrs
7
-
WXYZ
TIMER
PROG.
SPACE
DTV/TV
ABC
CH
SETUP
DISPLAY
TOP MENU
ENTER
CLEAR
RETURN
REV
PLAY
FWD
TUV
tuv
8
-
SKIP
STOP
SKIP
WXYZ
wxyz
9
-
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
*1 Press
, character set will be changed to the “ @!? ”
mode automatically.
• To delete letters, press [CLEAR] repeatedly.
Press and hold [CLEAR] to delete all letters.
• Use [s / B] to move the cursor to the left and right.
• You can enter up to 30 letters.
Playback
PAUSE
Recording
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
Disc
Management
DISC MENU
AUDIO
Basic Setup
PQRS
JKL
Connections
OPEN/
CLOSE
1) Use [K / L] to select a desired character set, then
press [ENTER].
2) Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
SE-R0294
Editing
Function Setup
VCR Function
Note
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 87
Others
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.
87
2009/04/03 15:39:28
EDITING DISCS
Setting Chapter Marks
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
DISC MENU
1
2
3
Follow steps 1 to 3 in “Putting Names
on Titles” on page 86 to display “Edit”
menu.
4
Use [K / L] to select “Add” or
“Delete”, then press [ENTER].
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
Use [K / L] to select “Chapter Mark”,
then press [ENTER].
Submenu will appear.
Use [SKIP H / G],
[REV E], [FWD D], [PLAY B] and
[PAUSE F] to find the point where
you will create a new chapter mark.
Or, use [SKIP H / G] to find a
chapter mark that you wish to delete.
e.g.) VR mode DVD-RW original
ORG
Edit - Chapter Mark
1
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
Chapter
REV
PLAY
FWD
SKIP
STOP
SKIP
Add
Delete
2/3
JAN/ 1/09 1:00AM CH10 LP
1 : 25 : 47
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
5
SE-R0294
Use [K / L] to select “Yes”, then press
[ENTER].
If you select “Add” at step 4, a new chapter mark
will be added, and if you select “Delete” at step
4, the chapter mark will be deleted.
e.g.) Add
ORG
Edit - Chapter Mark - Add
1
Chapter
Yes
No
2/3
JAN/ 1/09 1:00AM CH10 LP
1 : 25 : 47
A new chapter mark will be added.
Note
• Maximum numbers of chapter for each DVD:
VR mode DVD : 999 chapters per entire original
and playlist
+VR mode DVD : 254 chapters per disc, 99 chapters
per title
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.
88
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 88
6
7
Press [RETURN].
Press [RETURN] again and then
[RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
2009/04/03 15:39:30
Introduction
EDITING DISCS
Hiding Chapters
2
Use [K / L/ s / B] to select a desired
title, then press [ENTER].
+VR
Title List
JAN/15/09 1:00AM
1:00AM (2:00:00)
CH10 LP
JAN/15/09
CH10 LP
INPUT
SELECT
HDMI
1
2
3
.@/:
ABC
DEF
4
5
6
GHI
JKL
MNO
Basic Setup
OPEN/
CLOSE
CH
1/2
PQRS
TUV
WXYZ
TIMER
PROG.
SPACE
SETUP
DISPLAY
DISC MENU
AUDIO
3
Use [K / L] to select “Edit”, then
press [ENTER].
4
5
6
Use [K / L] to select “Hide Chapter”,
then press [ENTER].
Play From Start
Edit
Title Delete
TOP MENU
ENTER
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
Use [SKIP H] or [SKIP G] to decide
the chapter to be hidden.
Use [K / L] to select “Hidden”, then
press [ENTER].
+VR
Edit - Hide Chapter
1
JAN/15/09 1:00AM CH10 LP
1 : 25 : 47
Title list will appear.
Note
Title List
JAN/15/09 1:00AM CH10 LP
--:-- (2:00:00)
---/--/--
1
2
LP
3
Hidden
4
7
After this operation is completed,
press [RETURN] thrice to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible”, then press [ENTER]
at the step 6 above.
Data will be written onto the disc momentarily.
VCR Function
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
+VR
2 / 3 Hidden
Function Setup
1
Visible
Hidden
Editing
Chapter
Press [DVD].
In stop mode, press [TOP MENU].
Playback
PAUSE
Submenu will appear.
Recording
CLEAR
Disc
Management
DTV/TV
Connections
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Empty
Others
1/1
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 89
89
2009/04/03 15:39:33
EDITING DISCS
Deleting a Part of a Title
You can delete a specific part of a title.
Even when parts of title are deleted from the playlist, the
original title will remain as it is.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
1
2
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 86 to display
“Edit” menu.
Use [K / L] to select “Scene Delete”,
then press [ENTER].
e.g.) VR mode DVD-RW playlist.
PL
Edit
CH
1
TIMER
PROG.
SPACE
DTV/TV
SETUP
Scene Delete
Edit Title Name
Chapter Mark
Title Dividing
Title Combining
DISPLAY
AUDIO
JAN/ 1/09 1:00AM CH10 LP
1 : 25 : 47
TOP MENU
DISC MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
SE-R0294
Note
• When a scene is deleted from an original, the playlist
related to the original will be deleted.
• You cannot select “Scene Delete” if the number of
chapter marks in the original or playlist is more than
999. (Depends on the content, there is a case that
you cannot select “Scene Delete” before the number
of chapter marks reaches 999.)
• The recordable disc space will not increase even after
deleting a part of a title on the playlist.
90
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 90
2009/04/03 15:39:36
Introduction
EDITING DISCS
Deleting a Part of a Title (cont’d)
4
Use [K / L] to select “Delete” then
press [ENTER].
PL
Edit - Scene Delete
1
PL
Edit - Scene Delete
1
Connections
3
Use [SKIP H / G],
[REV E], [FWD D], [PLAY B] and
[PAUSE F] to find the start point,
then press [ENTER].
Start
End
Preview
Delete
Basic Setup
Start
End
Preview
Delete
JAN/ 1/09 1:00AM CH10 LP
1 : 47 : 00
JAN/ 1/09 1:00AM CH10 LP
1 : 25 : 47
PL
5
Use [K / L] to select “Yes” then press
[ENTER].
“Are you sure?” will appear. Select “Yes” using
[K / L] and then press [ENTER].
PL
Edit - Scene Delete
1
Edit - Scene Delete
1
Are you sure?
Yes
No
Recording
Start
End
Preview
Delete
Disc
Management
Then use [SKIP H / G],
[REV E], [FWD D], [PLAY B] and
[PAUSE F] again to move to the end
point, and press [ENTER].
JAN/ 1/09 1:00AM CH10 LP
1 : 50 : 00
JAN/ 1/09 1:00AM CH10 LP
The part of the title is deleted.
1 : 45 : 00
6
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
Playback
The cursor will move to “Preview”.
The bar at the bottom of the screen indicates the
total and the elapsed time of the title, and the
area selected for deletion is indicated in red.
You can check the preview by pressing [ENTER].
• Before and after 5 seconds of the deleted point
will be playback for preview.
This operation may take
awhile to be completed.
Editing
start point end point
Before
editing
Function Setup
Edited
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 91
91
2009/04/03 15:39:38
EDITING DISCS
Dividing a Title
Playlist
You can divide one title into two new titles.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SETUP
CH
TIMER
PROG.
DISPLAY
DISC MENU
e.g.) VR mode DVD-RW playlist
Play From Start
Edit
Title Delete
SPACE
DTV/TV
3
Use [K / L] to select “Edit”, then
press [ENTER].
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
4
5
6
Use [SKIP H], [SKIP G], [REV E],
[FWD D], [PAUSE F] and [PLAY B]
to decide the point at which you will
divide the title.
Use [K / L] to select “Title Dividing”,
then press [ENTER].
Use [K / L] to select “Yes”, then press
[ENTER].
e.g.) VR mode DVD-RW playlist
PL
Edit - Title Dividing
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
1
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
DUBBING
Yes
No
JAN/ 1/09 1:00AM CH10 LP
VCR
DVD
REC MODE
REC
REPEAT TIMER SET SEARCH
1 : 25 : 47
The title will be divided into two new titles.
Both title names are identical.
ZOOM
For DVD+RW: Data will be written onto the disc
momentarily.
SE-R0294
Writing to Disc
Press [DVD].
In stop mode, press [TOP MENU].
1
2
This operation may take
awhile to be completed.
• For VR mode DVD-RW, press [DISC MENU] to
select “Playlist”.
Use [K / L/ s / B] to select a desired
title, then press [ENTER].
90%
For VR mode DVD-RW: Proceed to step 7.
7
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
Note
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
99 (-RW) or 49 (+RW), and the number of recording
chapters reaches the maximum of 999 (-RW) or 254
(+RW).
92
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 92
2009/04/03 15:39:39
Introduction
EDITING DISCS
Combining Titles
Playlist
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
Use [K / L] to select “Title
Combining”, then press [ENTER].
PL
Edit
1
CH
TIMER
PROG.
SPACE
Basic Setup
OPEN/
CLOSE
1
2
Follow the steps 1 to 3 in “Dividing a
Title” on page 92 to display “Edit”
menu.
Scene Delete
Edit Title Name
Chapter Mark
Title Dividing
Title Combining
Disc
Management
JAN/ 1/09 1:00AM CH10 LP
1 : 25 : 47
DTV/TV
SETUP
DISPLAY
AUDIO
Title combining setting window will appear.
Selected title grays out, and the frame of the
next title becomes yellow.
TOP MENU
DISC MENU
PL
Edit - Title Combining
JAN/31/09 12:00PM CH13 LP
12:00PM (0:30:00) JAN/31/09
ENTER
RETURN
CH13 LP
1
2
3
4
5
6
Recording
CLEAR
1+
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
Connections
You can combine two titles into a single title.
FWD
PLAY
1/6
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
Selection menu will appear.
Use [K / L] to select “Yes”, then press
[ENTER].
Editing
3
4
Use [K / L / { / B] to select another
title to combine, then press [ENTER].
Combine selected titles?
SE-R0294
Yes
No
PL
Function Setup
The two titles will combine into a single title.
Title List
JAN/ 1/09 1:00AM CH10 LP
1:00AM (2:30:00)
JAN/ 1/09
CH10 LP
1
2
3
4
5
6
5
This operation may take
awhile to be completed.
Others
• You cannot select the same title twice and combine
it into a single title.
• If either one of the two original titles is deleted, the
combined new title is also deleted.
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 93
VCR Function
1/6
Note
Playback
SKIP
93
2009/04/03 15:39:43
EDITING DISCS
Setting or Releasing the Title Protection
Original
To prevent the accidental editing, or erasing of the titles,
you can protect them in “Edit” menu.
You can cancel the title protection feature after it is
applied.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
1
2
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 86 to display
“Edit” menu.
Use [K / L] to select “Protect”, then
press [ENTER].
ORG
Edit
1
Scene Delete
Edit Title Name
Chapter Mark
Protect
CH
JAN/ 1/09 1:00AM CH10 LP
1 : 25 : 47
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
DISC MENU
• If the title is protected,
the original list.
icon will appear in
AUDIO
TOP MENU
ENTER
CLEAR
3
Confirm the indication
“OFF ON”. Press [ENTER] again.
• If the title is already protected, “ON OFF” will
appear. If you press [ENTER], the title will be
released from protection.
RETURN
ORG
Edit - Protect
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
1
OFF
ON
JAN/ 1/09 1:00AM CH10 LP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
SE-R0294
1 : 25 : 47
•
icon will appear on the title in the original
list.
ZOOM
4
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
To protect a whole disc
(VR mode DVD-RW, DVD+RW/+R
only):
Select “Disc Protect OFF ON” from the DVD
Menu, then select “Yes”.
Refer to “SETTING A DISC TO PROTECT” on
page 41.
94
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 94
2009/04/03 15:39:45
Introduction
EDITING DISCS
Setting or Clearing All Chapter Marks at Once
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
Video
Edit
1
Edit Title Name
Chapter Mark
CH
JAN/ 1/09 1:00AM CH8 LP
Disc
Management
INPUT
SELECT
Use [K / L] to select “Chapter Mark”,
then press [ENTER].
Basic Setup
OPEN/
CLOSE
1
2
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 86 to display
“Edit” menu.
1 : 25 : 47
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
DISC MENU
AUDIO
TOP MENU
3
Use [K / L] to select the desired
interval, then press [ENTER].
Video
Edit - Chapter Mark
ENTER
CLEAR
RETURN
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
SE-R0294
4
5
Use [K / L] to select “Yes”, then press
[ENTER].
Chapter marks are added.
If you select “OFF” at step 3, all the chapter
marks are erased.
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
Function Setup
This operation may take
awhile to be completed.
VCR Function
Note
Others
• You cannot select a chapter mark interval that
exceeds the length of a title.
• The length of chapters may slightly deviate from the
one specified at the step 3.
• A chapter mark may be delayed depending on the
recording content.
• Maximum number of chapter for video mode DVD is
99 chapters per title.
• The interval for auto chapter may be up to two
minutes different from the time option you set.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 95
Editing
ZOOM
1 : 25 : 47
Playback
PLAY
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
JAN/ 1/09 1:00AM CH8 LP
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
Recording
1
REPEAT TIMER SET SEARCH
Connections
For titles in video mode DVD-RW, you can set or edit
chapter at every time interval. You can clear the chapter
mark too.
You can specify the interval of chapter marks for titles last
more than 5 minutes.
95
2009/04/03 15:39:48
LIST OF THE DEFAULT SETTINGS
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
General Setting
Setup
Playback
Display
Items (highlight is the default)
Parental Lock
→ page 100
Audio Out Dynamic Range Control ON
→ page 101
OFF
PCM
48kHz
96kHz
Dolby Digital
PCM
Stream
DTS
ON
OFF
Disc Menu Language
English
→ page 102
French
Spanish
Other
Audio Language
Original
→ page 102
English
French
Spanish
Other
Subtitle Language
OFF
→ page 102
English
French
Spanish
Other
Angle Icon
ON
→ page 102
OFF
Still Mode
Auto
→ page 102
Field
Frame
OSD Language
English
→ page 103
Français
Español
OFF
1 minute
5 minutes
10 minutes
15 minutes
Auto
Bright
Dark
Screen Saver
→ page 103
FL Dimmer
→ page 103
DTV CC
CC Style
96
OFF
level 8 [Adult] to
1 [Kid Safe]
Caption Service
→ page 36
Contents
Set the parental level for DVD playback.
Compressing the range of sound volume.
Set whether the sound recorded in 96kHz will be
down sampled to 48kHz.
Set the type of sound signal which outputs from
the digital audio output jack.
Set whether DTS signal is output or not.
Set the language for disc menu language.
Set the language for audio.
Set the language for subtitles.
Set whether to display the angle icon or not.
Set the type of still image in pausing playback.
Set the language for OSD (on-screen display).
Set the idling time before the screen saver starts.
Set the brightness of the front panel display.
Set the type of the DTV closed caption.
Recording
→ page 46
OFF
Service1
Service2
Service3
Service4
Service5
Service6
ON
OFF
User Setting
→ page 37
ON
OFF
Set the CC style setting whether or not is effective.
Font Size
→ page 38
Large
Middle
Small
Set font size of the displayed caption.
Font Style
→ page 38
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Set font style of the displayed caption.
Set whether to record the DTV closed caption or
not.
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 96
2009/04/03 15:39:49
Setup
Display
Items (highlight is the default)
CC Style
Font Opacity
→ page 38
Solid
Transparent
Translucent
Flash
Edge Type
→ page 38
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Set edge type of the displayed caption.
Set the viewing limitation according to US TV
program ratings.
Set the viewing limitation according to Canadian
English language ratings.
To set the rating.
Clear the downloadable rating information and its
setting.
Change the password.
General Setting
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 97
Others
Set to the progressive scan mode (set to "ON") or
to the interlace scan mode (set to "OFF").
VCR Function
Set the viewing limitation according to Canadian
French language ratings.
Function Setup
ON
OFF
Set the viewing limitation according to US movie
ratings.
Editing
Progressive
→ page 106
Set back color of the displayed caption.
Playback
Video
Set back opacity of the displayed caption.
Recording
Change Password
→ page 105
Set edge color of the displayed caption.
Disc
Management
Solid
Transparent
Translucent
Flash
Back Color
White
→ page 38
Black
Red
Green
Blue
Yellow
Magenta
Cyan
MPAA Rating
X
→ page 104
NC-17
R
PG-13
PG
G
NR
TV Rating
TV-MA
→ page 104
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
Canadian English Rating 18+
→ page 104
14+
PG
G
C8+
C
E
Canadian French Rating 18ans+
→ page 105
16ans+
13ans+
8ans+
G
E
Downloadable Rating
Block Setting
→ page 105
Clear
Downloadable Rating
Basic Setup
Set the font color of the displayed caption.
Connections
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Back Opacity
→ page 38
V-Chip
Contents
Set the font opacity of the displayed caption.
Font Color
→ page 38
Edge Color
→ page 38
Introduction
LIST OF THE DEFAULT SETTINGS
97
2009/04/03 15:39:50
LIST OF THE DEFAULT SETTINGS
Setup
Video
Items (highlight is the default)
TV Aspect
→ page 106
Select Video - L1(Rear)
→ page 55
Recording
Set the video input type to match the external
input.
Aspect Ratio (Video mode)
→ page 47
Auto
4:3
16:9
Set a aspect ratio for video mode recording.
Dubbing Mode
→ pages 60-61
VCR
DVD
ON
OFF
Auto Chapter
→ page 46
General Setting
Make Recording Compatible
→ page 46
Clock Setting → page 32
Auto Clock Setting
→ page 30
Daylight Saving Time
→ page 32
Channel
Auto Channnel Preset
→ page 27
Manual Channel Preset → pages 28-29
TV Audio Select
→ page 35
DivX
HDMI
Contents
Set a picture size according to aspect ratio of your
TV.
Video In
S-Video In
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
PCM
Dolby Digital
ON
OFF
ON
OFF
Recording Audio Select (XP)
→ page 47
Auto
Disc Full
Finalize
→ page 42 End of Timer Rec
Clock
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
DivX®VOD → page 107
DivX Subtitle
→ page 107
DVD
VCR
OFF
Auto
Manual
ON(MAR-NOV)
ON(APR-OCT)
OFF
Air
Cable
Cable (Extended
Scan)
Stereo
SAP
OFF
English
French
Spanish
German
Italian
Swedish
Dutch
Russian1
Russian2
Hungarian
Polish
Czech
Insert chapter marks at even time interval.
Set the recording audio type. (Only when the rec
mode is set to XP.)
Set the unit to finalize the disc automatically.
Set the VCR to DVD (DVD to VCR) duplication.
Set to prohibit additional recording (OFF) or to
replace the title list after recording (ON).
Set the clock.
Set the clock automatically.
Set the clock for the daylight saving time.
Tune the channels automatically.
Tune the channels manually.
Set the analog TV audio type for output and video
mode or DVD+RW/+R recording.
Provide DivX®VOD registration code.
Set the language for DivX Subtitle.
Format
→ page 108
RGB
YCbCr
Set the color space for the HDMI output.
HDMI Audio
→ page 109
ON
OFF
Set whether to output the HDMI audio signal or
not.
RGB Range
→ page 109
Normal
Enhanced
Yes
No
Set the black-white contrast level for HDMI RGB
output.
Reset All
→ page 110
Set to the default setting.
Note
• Your change to each settings stays on even when the power is off.
• An item which is not currently available is grayed in the settings.
98
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 98
2009/04/03 15:39:50
Introduction
GENERAL SETTING
Playback
Press [STOP C] if you are playing back a disc.
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
DTV/TV
SETUP
DISPLAY
Use [K / L] to select “Playback”, then
press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
AUDIO
TOP MENU
Disc
Management
DISC MENU
1
2
Press [SETUP] and use [K / L] to
select “General Setting“, then press
[ENTER].
ENTER
CLEAR
RETURN
REV
PLAY
FWD
SKIP
STOP
SKIP
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
SE-R0294
ZOOM
1
2
3
4
5
6
7
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Submenu will appear.
Refer 1 to 7 on pages 100 to 102
and set the selected item.
When you finish with the setting,
press [SETUP] to exit.
Editing
4
5
Playback
PAUSE
3
Use [K / L] to select a desired item,
then press [ENTER].
Recording
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
Basic Setup
INPUT
SELECT
Connections
OPEN/
CLOSE
Function Setup
VCR Function
Others
EN
E9SK0UD_DVR670KU_EN_v1.1.indd 99
99
2009/04/03 15:39:51
GENERAL SETTING
Playback (cont’d)
1
Parental Lock (Default: OFF)
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K / L] to select the desired level, then press
[ENTER].
Parental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
If a password has not been set yet, proceed to A .
If a password has been set already, proceed to B .
RATING EXPLANATIONS
• OFF : Parental Control is inactive; all discs can play.
• 8 [Adult]: DVD software of any grades (adult/general/
children) can be played back.
• 7 [NC 17]: No one under 17 admitted.
• 6 [R]: Restricted; under 17 requires accompanying
parent or adult guardian.
• 5 [PG R]: Parental Guidance Recommended.
• 4 [PG13]: Unsuitable for children under 13.
• 3 [PG]: Parental Guidance suggested.
• 2 [G]: General Audience.
• 1 [Kid Safe]: Suitable for children.
Note
A
A password has not been set yet.
Use [K / L] to select “Yes”, then press [ENTER]. Use
[the Number buttons] to enter a new password except
for 4737, then press [ENTER].
Change Password?
Yes
No
Password Input
Yes
Your setting will be activated.
B
A password has been set already.
• Use [the Number buttons] to enter the current
password.
Password Input
Your setting will be activated.
• If you want to change password, use [K / L] to select
“Yes” then press [ENTER]. Use [the Number buttons]
to enter a new password except for 4737, then press
[ENTER].
<change the password>
Change Password?
Yes
No
Password Input
Yes
Your setting will be activated.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4737 using
[the Number buttons] in password input window.
Password will be cleared and parental levels will be
set to “OFF”.
• Parental lock function may not be available to some
discs.
• With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
• Record the password in case you forget it.
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
100 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 100
2009/04/03 15:39:53
Introduction
GENERAL SETTING
Playback (cont’d)
2
Audio Out
Settings for Dolby Digital (Default : Stream)
Use [K / L] to select a setting, then press [ENTER].
Use [K / L] to select a desired item, then press [ENTER].
Dolby Digital
PCM
Stream
Audio Out
A
Dynamic Range Control
PCM
Dolby Digital
DTS
Dynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and loud sounds.
Dynamic Range Control
ON
OFF
Your setting will be activated.
• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
B
Settings for PCM (Default : 48kHz)
Settings for DTS (Default : ON)
Select a setting using [K / L], then press [ENTER].
DTS
ON
OFF
Use [K / L] to select a setting, then press [ENTER].
PCM
Playback
Your setting is activated.
ON
: Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to “ON”.
OFF
: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to “OFF”.
Recording
Note
D
Disc
Management
Use [K / L] to select a setting, then press [ENTER].
Your setting will be activated.
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
Basic Setup
A
B
C
D
Connections
Choose the appropriate audio setting for your external device.
It will only affect a disc playback.
C
48kHz
96kHz
Editing
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Function Setup
Note
When playing back disc with copyright protection
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
VCR Function
Others
EN 101
E9SK0UD_DVR670KU_EN_v1.1.indd 101
2009/04/03 15:39:54
GENERAL SETTING
Playback (cont’d)
3
Disc Menu Language (Default : English)
Set the language for disc menu.
Use [K / L] to select a language, then press [ENTER].
Disc Menu Language
English
French
Spanish
Other
Your setting will be activated.
4
Audio Language (Default : Original)
Set the audio language.
Use [K / L] to select a language, then press [ENTER].
Note
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
• Press [CLEAR] to erase numbers entered incorrectly.
6
Angle Icon (Default : ON)
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a setting, then press [ENTER].
Angle Icon
Audio Language
ON
OFF
Original
English
French
Spanish
Other
Your setting will be activated.
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
5
7
Still Mode (Default : Auto)
Select “Auto” usually.
Use [K / L] to select a setting, then press [ENTER].
Subtitle Language (Default : OFF)
Still Mode
Auto
Field
Frame
Set the subtitle language.
Use [K / L] to select a language, then press [ENTER].
Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
Field
: Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Subtitle Language
OFF
English
French
Spanish
Other
Note
Your setting will be activated.
If “Other” is selected for 3 to
using [the Number buttons].
5 , press 4-digit code
• Frame is one completed video image made up of two
fields (There are 30 frames per second of NTSC video).
Code Input
-
-
-
-
• When you finish entering the code, press [ENTER].
Refer to the language code table on page 118.
102 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 102
2009/04/03 15:39:56
Introduction
GENERAL SETTING
Display
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
4
1
CH
OSD Language (Default : English)
Set the language for the on-screen display.
Use [K / L] to select a language, then press [ENTER].
Basic Setup
INPUT
SELECT
OSD Language
TIMER
PROG.
SPACE
SETUP
DTV/TV
DISPLAY
English
Français
Español
AUDIO
Connections
OPEN/
CLOSE
Press [SETUP] to exit.
Your setting will be activated.
DISC MENU
TOP MENU
ENTER
CLEAR
RETURN
Set the time to activate the screen saver function on the
TV screen.
Use [K / L] to select a setting, then press [ENTER].
Screen Saver
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
PLAY
FWD
SKIP
STOP
SKIP
OFF
1 minute
5 minutes
10 minutes
15 minutes
Recording
REV
Screen Saver (Default : 10 minutes)
Your setting will be activated.
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
ZOOM
3
FL Dimmer (Default: Bright)
Set the front panel display brightness.
Use [K / L] to select a setting, then press [ENTER].
FL Dimmer
Playback
REPEAT TIMER SET SEARCH
Disc
Management
2
Auto
Bright
Dark
Use [K / L] to select “Display”, then
press [ENTER].
4
DTV CC
Refer to “DTV Closed Caption” and “Recording the DTV
Closed Caption” on page 36 and 46.
5
CC Style
Refer to “Closed Caption Style“ on pages 37-38.
VCR Function
Use [K / L] to select a desired item,
then press [ENTER].
1
2
3
4
5
6
Function Setup
1
2
3
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
You can choose one from “Auto”, “Bright” or “Dark”.
If “Auto” is selected, the display gets dark when the
power is off.
Editing
Press [STOP C] if you are playing back a disc.
OSD Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
Others
Submenu will appear.
EN 103
E9SK0UD_DVR670KU_EN_v1.1.indd 103
2009/04/03 15:39:57
GENERAL SETTING
Display (cont’d)
6
V-Chip
With the v-chip system in this unit, you can set the
viewing limitation for the analog/digital TV programs
received from the tuner or recorded on DVDs to prevent
your children from watching inappropriate programs. If
the unit detects a blocked program, a restriction message
appears and you are not allowed to view the program.
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use [the
Number buttons] to set the access password, then
press [ENTER]. The number you entered will be stored
as the access password.
Password Input
A
B
C
D
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
You can set the viewing limitation according to
MPAA rating (US movie ratings),
TV Rating (US TV program ratings),
Canadian English Rating (Canadian English language ratings).
Canadian French Rating (Canadian French language ratings),
1) Use [K / L] to select the desired rating, then press
[ENTER] repeatedly to switch between view and
block. When it is blocked a key icon will appear.
e.g.) MPAA rating
MPAA Rating
X
NC-17
R
PG-13
PG
G
NR
2) Use [K / L] to select a desired item, then press
[ENTER].
V-Chip
A
B
C
D
E
F
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Change Password
[MPAA Rating]
Rating
Note
• When you record a TV program blocked by the
v-chip settings on the cassette tape, the audio/video
signal of the blocked part cannot be recorded
properly. No audio/video signal will be output when
playing back that part.
• When you press [DISPLAY] while playing back the
blocked part on the cassette tape, the counter
display will not be shown properly. This is not a
malfunction.
Category
X
Mature audience only
NC-17
No one under 17 admitted
R
Restricted; under 17 requires
accompanying parent or adult guardian
PG-13
Unsuitable for children under 13
PG
Parental guidance suggested
G
General audience
NR
No rating
higher
lower
[TV Rating]
Rating
Category
TV-MA
Mature audience only
TV-14
Unsuitable for children under 14
TV-PG
Parental guidance suggested
TV-G
General audience
TV-Y7
Appropriate for all children 7 and older
TV-Y
Appropriate for all children
None
No rating
higher
lower
[Canadian English Rating]
Rating
Category
18+
Adult audience only
14+
Unsuitable for ages under 14
PG
Parental guidance suggested
G
General audience
C8+
For children over 8
C
For all children
E
Exempt program
higher
lower
104 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 104
2009/04/03 15:40:00
Introduction
GENERAL SETTING
Display (cont’d)
[Canadian French Rating]
Rating
E
Category
16ans+
Unsuitable for ages under 16
13ans+
Unsuitable for ages under 13
8ans+
Unsuitable for ages under 8
G
General audience
E
Exempt program
higher
lower
As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you
can further set the sub ratings to block specific
elements of programming. Press [K / L/ { / B] to select
the desired rating or sub rating, then press [ENTER]
repeatedly to switch between view and block. Sub
rating status will appear on the side of the main rating.
FV
V
S L
D
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
Category
Rating
Fantasy Violence
TV-Y7
V
Violence
S
Sexual Situation
L
Coarse Language
TV-PG
TV-14
TV-MA
D
Suggestive Dialogue
TV-PG, TV-14
Note
• Changing the main rating to block or view
automatically changes all its sub ratings to the same
(block or view).
Note
• Depending on the type of rating system, you may set
the levels individually.
• The downloaded rating does not block the DVD
contents.
• The TV program blocked by the downloaded ratings
cannot be recorded.
F
Editing
To clear the downloadable rating information and its
setting:
Use [K / L] to select “Clear Downloadable Rating”, then
press [ENTER].
Playback
FV
• This message will also appear when you try to access
“Downloadable Rating“ after you have cleared the
downloadable rating information, and the new
information has not been downloaded.
To set the rating:
Use [K / L] to select “Block Setting” then press [ENTER]
to show the various types of ratings. Use [K / L] to select
a desired rating to set, then press [ENTER] to show the
levels for the rating. Use [K / L] to select a level, then
press [ENTER] to switch between view or block. If you set
one level to block, a key icon will appear and all the
higher levels will be blocked automatically.
Recording
Sub Rating
Downloadable Rating is currently
not available.
Disc
Management
TV Rating
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
This feature is available only after the digital TV
ratings have been downloaded
• The ratings can be downloaded by the unit
automatically if it is available in your area.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
Basic Setup
Adult audience only
Connections
18ans+
Downloadable Rating
Change Password
Note
VCR Function
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forgot the access password, enter 4737
using [the Number buttons] in password input
window. Password will be cleared.
Function Setup
Change the current password.
Use [the Number Buttons] to enter new access
password.
Others
EN 105
E9SK0UD_DVR670KU_EN_v1.1.indd 105
2009/04/03 15:40:01
GENERAL SETTING
Video
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
1
CH
SPACE
SETUP
DTV/TV
DISPLAY
DISC MENU
Progressive (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
1) Use [K / L] to select “ON“, then press [ENTER].
TIMER
PROG.
Progressive
AUDIO
ON
OFF
TOP MENU
2) Use [{ / B] to select “Yes“, then press [ENTER].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
ENTER
CLEAR
RETURN
NOTE :
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
Press [STOP C] if you are playing back a disc.
1
2
3
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
Use [K / L] to select “Video”, then
press [ENTER].
Use [K / L] to select a desired item,
then press [ENTER].
1 Progressive
2 TV Aspect
3 Select Video
Submenu will appear.
4
5
Refer 1 to 2 on this page and set
the selected item.
• For 3 , refer to “Connection to an External
Device“ on page 55.
When you finish with the setting,
press [SETUP] to exit.
Activate?
Yes
No
3) Use [K / L] to select “Yes“ within 15 seconds, then
press [ENTER].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV. (Refer to pages 21-22.) If not, use the RCA video cable
and set the progressive scan to “OFF”.
• If the Progressive Scan image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during DVD
playback. The “Progressive” setting will be “OFF”.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
2
TV Aspect (Default: 16:9 Wide)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
106 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 106
2009/04/03 15:40:01
DivX®
INPUT
SELECT
3
HDMI
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
SETUP
DTV/TV
DISPLAY
DISC MENU
AUDIO
TOP MENU
1
DivX® VOD
DivX R VOD
Your registration code is :
ENTER
CLEAR
RETURN
To learn more visit
www.divx.com/vod
Disc
Management
This unit allows you to play back the files purchased or
rented from DivX® VOD (video-on-demand) services. The
files are available on the internet. When you purchase or
rent DivX® VOD files on the internet, you will be asked to
enter an activation/registration code. This menu item
provides you with the activation/registration code.
On how to activate this unit for the DivX® VOD file
playback, visit www.divx.com/vod.
Basic Setup
.@/:
1 DivX R VOD
2 DivX Subtitle
Connections
OPEN/
CLOSE
Use [K / L] to select a desired item,
then press [ENTER].
Introduction
GENERAL SETTING
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
ZOOM
SE-R0294
Set the DivX® subtitle.
Use [K / L] to select a setting, then press [ENTER].
DivX Subtitle
OFF
English
French
Spanish
German
Italian
Swedish
Use [K / L] to select “DivX”, then
press [ENTER].
Your setting will be activated.
4
When you finish with the setting,
press [SETUP] to exit.
VCR Function
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
Function Setup
1
2
Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [ENTER].
DivX Subtitle (Default : OFF)
Editing
2
Playback
REPEAT TIMER SET SEARCH
• One registration code is only valid for one DivX® VOD
file.
• You must first download the file from the internet
and play it back on this unit before you are able to
get another code.
• You must follow this step every time you purchase or
rent a DivX® VOD file from the internet.
• For more information for DivX®, please visit
http://www.divx.com/vod.
• The registration code will be displayed in 8
characters consist of numbers between 0 to 9 and
capital letters chosen randomly.
Recording
Note
REV
Others
EN 107
E9SK0UD_DVR670KU_EN_v1.1.indd 107
2009/04/03 15:40:03
GENERAL SETTING
HDMI
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
TIMER
PROG.
SPACE
SETUP
DTV/TV
1
2
DISPLAY
DISC MENU
AUDIO
TOP MENU
Use [K / L] to select “HDMI”, then
press [ENTER].
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
• You cannot select HDMI when an HDMI cable is
not connected or the TV’s external input
channel is not set to HDMI.
ENTER
CLEAR
Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [ENTER].
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
ZOOM
3
Use [K / L] to select a desired item,
then press [ENTER].
4
When you finish with the setting,
press [SETUP] to exit.
1
SE-R0294
1 Format
2 HDMI Audio
3 RGB Range
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [ENTER].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
Format
RGB
YCbCr
Your setting will be activated.
108 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 108
2009/04/03 15:40:05
Introduction
GENERAL SETTING
HDMI (cont’d)
2
HDMI Audio (Default : ON)
Connections
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUT jack to your audio system,
etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [ENTER].
• Set to “OFF” when the HDMI sound is not output.
Basic Setup
HDMI Audio
ON
OFF
Your setting will be activated.
RGB Range (Default : Normal)
Disc
Management
3
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [ENTER].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
Recording
RGB Range
Normal
Enhanced
Your setting will be activated.
Playback
Editing
Function Setup
VCR Function
Others
EN 109
E9SK0UD_DVR670KU_EN_v1.1.indd 109
2009/04/03 15:40:07
GENERAL SETTING
Reset All
Reset the setting to default.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
SETUP
3
Select “Yes” using [K / L] , then press
[ENTER].
TIMER
PROG.
SPACE
DTV/TV
1
2
Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [ENTER].
DISPLAY
DISC MENU
AUDIO
TOP MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
PLAY TIME SLIP
REV
PLAY
FWD
SKIP
STOP
SKIP
PAUSE
VCR
DVD
DUBBING
REC MODE
REC
REPEAT TIMER SET SEARCH
Use [K / L] to select “Reset All”, then
press [ENTER].
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
Reset to factory default?
Yes
No
“Are you sure?” will appear. Select “Yes” using
[K / L] and then press [ENTER].
Your setting will be initialized.
ZOOM
SE-R0294
Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
- Clock setting
- Channel setting
- OSD language setting
- Parental lock setting
- DivX® VOD code
- V-chip setting
- Timer programs
110 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 110
2009/04/03 15:40:07
Information on VCR Functions
Press [VCR] first.
Before recording, make sure:
• The desired channel is selected by pressing
/ ].
[the Number buttons] or [CH
• There is a cassette tape with an erase-protection tab in
the unit.
• The desired recording speed is selected in SP (standard
playback) or SLP (super long playback) mode by
pressing [REC MODE].
Recording speed:
Tape speed
Type of tape
T120
T160
1hour
2hours
2-2/3hours
SLP
3hours
6hours
8hours
• Refer to pages 50-54 for instructions on timer recording.
1) Press [REC I] to begin the recording.
To temporarily stop recording or to resume it, press
[PAUSE F]. After the unit has been in pause mode for
5 minutes, it will stop automatically to protect the
cassette tape and the video head from damage.
3) During playback, press [PAUSE F].
Playback will pause and sound will be muted.
Playback
4) Press [PLAY B] to resume playback.
5) Press [STOP C] to stop playback.
6) Press [OPEN/CLOSE A] to eject the cassette tape.
Note
2) Press [STOP C] when the recording is completed.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette tape, remove its eraseprotection tab. To record on it later, cover
the hole with cellophane tape.
Editing
erase-protection tab
Function Setup
• When a cassette tape ends during playback, fastforward or normal recording, the unit will
automatically rewind to the beginning of the
cassette tape. After rewinding finishes, the unit will
eject the cassette tape.
• When a cassette tape without erase-protection tab is
inserted, the unit will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
/ ].
[CH
• Playback will stop when you change the output
mode.
Recording
2) Insert a prerecorded cassette tape. Press [PLAY B]
to begin playback.
T60
SP
Disc
Management
1) Press [I/y ON/STANDBY] on the remote control or
the front panel of the unit.
When you are playing back a cassette tape, turn on the
TV and be sure to select the input to which the unit is
connected.
Press [VCR].
Recording / playback time
Basic Setup
Playback
Recording
Connections
Caution on using S-video, component, or HDMI
connection for VCR:
• Only the playback audio / video are available with these
connections.
• Under the conditions listed below, the playback image
and audio cannot be output. Use the standard video
connection, in such case;
- during DVD recording.
- when L3 (DV-IN) is selected.
• HDMI video resolution cannot be changed when the
unit is in VCR mode.
Introduction
VCR FUNCTIONS
Note
• This function is available only when the unit is
connected by the VIDEO OUT jack.
VCR Function
Others
EN 111
E9SK0UD_DVR670KU_EN_v1.1.indd 111
2009/04/03 15:40:09
VCR FUNCTIONS
One-touch Timer Recording (OTR)
Index Search
This feature allows you to set the recording length simply
by pressing [REC I] on the remote control.
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
1) During normal recording, press [REC I] to begin
the one-touch timer recording.
You can select a fixed recording time by pressing
[REC I] repeatedly.
Press [VCR] first.
1) Press [SEARCH] so that “INDEX SEARCH” menu
appears.
(Normal recording)
(8:00)
(0:30)
(1:00)
2) Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
(7:30)
INDEX SEARCH
03
When the one-touch timer recording is finished, the
unit will turn off automatically.
To change the recording length during the one-touch
timer recording, press [REC I] repeatedly until the
desired length appear.
To cancel the one-touch timer recording within the
specified time, press [STOP C].
Note
• The remaining recording time will be displayed on
the front panel display during one-touch timer
recording. Press [DISPLAY] to see it on the TV screen.
• You cannot pause the one-touch timer recording.
• If VCR the one-touch timer recording is completed
during DVD playback or recording, the VCR will be in
stop mode and the DVD keeps the current mode.
• Unlike a timer recording, you can perform the
following operations during the one-touch timer
recording.
- Turning off the power (One-touch timer recording
will be canceled.).
- Using [REC I] or [STOP C].
• When the one-touch timer recording is finished and
the power is turned off, the unit will switch to the
standby mode automatically if a timer recording has
been programmed. Press [TIMER SET] to cancel the
standby mode for using the unit continuously.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
3) Press [REV E], [FWD D] to start index search.
If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press
[REV E].
After index search, the VCR will play back the cassette
tape automatically.
CURRENT PROGRAM
Beginning
of tape
Pro.1
02
Pro.2
01
Pro.3
01
End
of tape
Pro.4
02
Pro.5
03
INDEX MARK
Note
• You can make the index mark up to 20.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
112 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 112
2009/04/03 15:40:11
Time Search
Press [VCR] first.
1) Press [SEARCH] repeatedly so that “TIME SEARCH”
menu appears.
TIME SEARCH
2:50
MONO
non Hi-Fi tapes
Monaural
Monaural
Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
L+R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Hi-Fi tapes
recorded second
audio program
Second audio
program
Second audio
program
Second audio
program
VCR Function
R-channel
Function Setup
HIFI
L-channel
Editing
Your Selection
Type of recorded tape
Playback
• Index search and time search are not available
during recording.
• Press [STOP C] to stop the search.
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
Recording
Note
Fast forward:
When the unit is in stop mode, press [FWD D] to fast
forward the cassette tape.
Rewind:
When the unit is in stop mode, press [REV E] to rewind
the cassette tape.
To cue or review picture during playback (picture search):
Press [REV E], [FWD D] during playback.
Press it again and the unit will search in super high
speed. (in the SLP mode only)
To freeze the picture on TV screen during playback
(still mode):
Press [PAUSE F]. Each time you press the button, the
picture will be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [CH
/ ] on
remote control.
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
Counter reset:
Press [CLEAR] to reset the counter to “0:00:00”.
To playback in slow motion:
Press [PAUSE F] during playback, then press [FWD D].
Press [FWD D] or [REV E] repeatedly during slow
motion playback to select the desired speed.
Automatic rewind:
When a cassette tape is played back or fast forwarded to
its end, the cassette tape will rewind to the beginning,
stop and eject itself.
To repeat a playback indefinitely without touching
[PLAY B] (Auto Repeat Playback):
During normal playback, press [REPEAT]. When a tape is
played to its end, the tape will rewind to the beginning and
start playback itself. To cancel the Auto Repeat Playback,
press [REPEAT] again.
When you playback a cassette tape recorded in Hi-Fi
stereo:
Press [AUDIO ] on the remote control to select Hi-Fi or
MONO for playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select
“MONO”.
Disc
Management
3) Press [REV E], [FWD D] to start time search.
If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press
[REV E].
After time search, the unit will play back the cassette
tape automatically.
Press [VCR] first.
Basic Setup
2) Using [the Number buttons], enter your desired
time to skip within 30 seconds.
You can set the time up to 9:59.
Other Operations
Connections
This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
Introduction
VCR FUNCTIONS
Note
Others
• Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video head.
• To return to playback from the picture search/still/
slow mode, press [PLAY B].
EN 113
E9SK0UD_DVR670KU_EN_v1.1.indd 113
2009/04/03 15:40:12
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
The power does not turn on.
D
V
D
•
V
C
R
Remedy
• Check that the AC power cord is connected securely.
• Check the breaker (in case of power failure).
• Press [TIMER SET] to cancel the timer standby mode.
There is no picture.
• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• Check the connection to your TV (pages 19-22).
• Check if the progressive scan mode is set correctly according to your TV
(page 106).
• Switch the input selector on your TV (such as to “L1”) so that the signal
from the unit appears on the TV screen.
TV program reception does not fill the • Try to set the channels with “Auto Channel Preset” or “Manual Channel
TV screen.
Preset” in “Channel” menu (pages 27-29).
/ ].
• Select a channel of any TV program using [CH
TV channels cannot be changed.
• Switch the input to TV.
• Connect the RF coaxial cable correctly (pages 19-24).
TV program pictures are distorted.
• Check if all the connections are made correctly (pages 19-24).
• Adjust TV antenna.
• Adjust the picture. (Refer to the TV’s instruction manual.)
• Place the unit and TV farther apart.
• Place the TV and any bunched RF coaxial cables farther apart.
Playback picture is distorted.
• Keep the device which may cause electrical disturbances, such as a
cellular phone, away.
Playback picture or TV program from • If the playback picture output from a DVD player, VCR or tuner goes
the device connected through the unit through the unit before reaching your TV, the copy-protection signal
is distorted.
applied to some programs could affect picture quality. Disconnect the
playback device in question and connect it directly to your TV.
No analog TV closed captions are
• If you are using HDMI connection to watch the TV programs through
output.
this unit’s tuner, analog TV closed caption cannot be output. Try using
other connection.
There is no sound.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
• Check the connections to the amplifier input.
• Check if the input device setting on the amplifier is correct.
• When the unit is in pause mode or in slow-motion playback mode,
sound is not output. This is not a malfunction.
• When the unit is in fast forward or fast reverse mode, sound is not
output. This is not a malfunction.
• If the audio signal does not come through the DIGITAL AUDIO OUT
(COAXIAL) jack, check the setting in “Audio Out” (page 101).
• While the setup menu or timer programming display is shown, or while
the screen saver is active, the audio is muted.
No DTS sound on digital output.
• Change the setting menu for “DTS” to “ON”.
No DTS sound from analog output
• This unit has no analog sound output when playing back the selected
DTS sound mode.
Nothing was recorded even though
• There was a power failure during recording.
you set the timer setting correctly.
• The unit’s internal clock stopped due to a power failure that lasted for
more than 30 seconds. Reset the clock (page 32).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
Timer recording does not start.
• No disc is inserted.
• A disc is not recordable (finalized DVD-RW/-R, finalized DVD+R, a fully
recorded disc, etc.).
Timer recording is not complete or did • The timer setting overlapped with another setting that has priority
not start from the beginning.
(page 54).
• Disc space was not enough.
• “Make Recording Compatible“ is not set to “ON”, when recording onto
DVD+RW/+R that was recorded on other unit.
Timer recording is impossible.
appears on the front panel display of this unit. If not, press
• Make sure
[TIMER SET].
114 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 114
2009/04/03 15:40:14
Picture noise appears.
Playback picture from the external
devices connected to this unit is
distorted.
There is no sound.
Sound is noisy.
D The disc does not play back.
V
D
Others
Discs recorded on this unit cannot be
played back on other DVD players.
The disc does not start playback from
the beginning.
VCR Function
Playback image freezes for a second.
Function Setup
• If the setup menu appears on the TV screen, press [RETURN] to exit.
• Check if the progressive scan mode is set correctly according to your TV
(page 106).
• Clean the disc with a cleaning cloth.
• If the picture output signal from the external devices passes through this
unit to get to your TV, the copy protection signal applied to some DVD could
affect the picture quality. Disconnect the playback device in question and
connect it directly to your TV.
• If you are using DIGITAL AUDIO OUT (COAXIAL) jack, check the setting in
“Audio Out” (page 101).
• Clean the disc with a cleaning cloth.
• Clean the disc with a cleaning cloth.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (pages 9-10).
• The region code on the DVD-video does not match the unit (page 10).
• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play back
the disc if it was not finalized.
• During the playback of 2 layered disc, picture may freeze for a moment
when the 1st layer switches to the 2nd layer. This is not a malfunction.
• If you are using DVD-RW/-R or DVD+R, please ensure you finalized the
disc after recording (pages 42-44).
• Resume playback was activated (page 69). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.
Editing
There is no picture.
Playback
• For recording with the DVC, the recording audio signal can be set to 12
bits or 16 bits. However, when 16-bit recording mode is selected, audio
signal cannot be switched. To record an audio signal, set it to 12 bits.
Recording
DV audio signal cannot be switched.
Disc
Management
• Some functions may not operate depending on the type of DVC. For
example, if the DVC does not support slow playback mode, the slow
playback function is disabled.
• With L3 (DV-IN), the disc display menu does not appear unless disc
playback is executed.
Basic Setup
Certain functions of the unit cannot
operate.
Connections
Symptom
Remedy
The remote control does not function. • Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Check if the unit is turned on.
• The remote control is not pointed at the infrared sensor window on the unit.
• Press [DVD] or [VCR], whichever you need. Then, try again.
• Press [TIMER SET] to cancel the timer standby mode.
The unit does not operate properly.
• When static electricity, etc., causes the unit to operate abnormally,
unplug the unit and then plug it in again.
DV signal cannot be input.
• Before connection, turn on the power supplies for both this unit and the
DVC, and make sure that these units are in stop mode.
• Only a “DVC-SD” signal can be input from the DVC to this unit. Other
D
types of signals are not supported.
V
• Do not connect any device other than the DVC. Even if a recorder or PC
D
with another DV terminal is connected, the DV function will not operate.
•
If the DVC is not recognized after connection, turn off the power supply
•
for the unit and re-connect the DVC.
V
The DVC cannot be operated with this • Signal input or DVC operation from this unit may be disabled
C unit.
depending on the type of DVC.
• If a DVC signal cannot be input, use an external input
R
(L1(Rear) / L2 (Front)) for analog connection via audio/video cables.
• DVC control may be disabled depending on the type of DVC, even in a
mode other than camera mode. In this case, switch to DVD control and
execute the normal recording procedure while operating the DVC.
Introduction
TROUBLESHOOTING
EN 115
E9SK0UD_DVR670KU_EN_v1.1.indd 115
2009/04/03 15:40:15
TROUBLESHOOTING
Symptom
The unit starts playing back the disc
automatically.
Some functions such as stop, search,
or slow-motion playback cannot be
performed.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed or turned off.
The angles cannot be changed.
Recording does not stop immediately
after you press [STOP C].
The disc tray does not open when you
press [OPEN/CLOSE A].
“Repairing” appears on the TV screen.
D
Repairing
V
D In a case you intend to cancel the
repairing process.
Do you want to cancel a repairing
process ? When selecting “Yes”,
the disc may not be usable.
Remedy
• The DVD-video features an auto playback function.
• Depending on the disc, you may not be able to do some of the
operations. Refer to the instruction manual supplied with the disc.
• The title does not have the multilingual audio tracks.
• The DVD-video prohibits the changing of the language for the sound
track.
• Multilingual subtitle are not recorded on the DVD-video.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc
contains a multi-angle portion. Actual change will be performed when
the portion has come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.
• It may take a few seconds for the unit to input disc data before
recording stops.
• It may take a few seconds for the disc tray to open after you have recorded
or edited a disc. This is because the unit is adding disc data to the disc.
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
• If you intend to cancel the repairing process, press [A OPEN/CLOSE]
on the front panel, then select “Yes” and press [ENTER]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Yes
No
Repairing
No image from HDMI connection.
• Check the HDMI connection. (Check the status of the HDMI related indications.)
• Check whether the connected monitor device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• If the unit is connected to the unauthorized display device with an
HDMI cable, the audio/video signal may not be output when playing
back a commercial DVD-video.
There is no sound or the sound is
distorted.
• The HDMI sound is not output when “HDMI Audio” is set to “OFF”.
• Check the RCA audio cable connection. If you are using HDMI-DVI
conversion cable, you must connect the RCA audio cable, too.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
Setup menu cannot be called up.
• Setup menus cannot be called up during DVD recording and playback.
There is no picture.
• If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT /
HDMI OUT jack, connect it to AUDIO / VIDEO OUT jack instead.
Picture noise appears.
• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”
(page 5).
/ ] while
• Adjust tracking control for better picture by pressing [CH
V
you are playing back a cassette tape.
C The cassette tape does not play back. • No cassette tape is inserted.
R The tape ejected after you press
• Make sure the cassette tape has an erase-protection tab when you record
[REC I].
to a cassette tape. If needed, cover the hole with cellophane tape.
The remote control does not function. • Check if a cassette tape is in this unit.
The motor rotates even when
• The motor may rotate for the duration of approximately 5 minutes for
playback / recording is stopped.
efficient operation. This is not a malfunction.
116 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 116
2009/04/03 15:40:15
Error message
Cause
Solution
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• The current selected parental level
prohibits playback.
• Insert the standardized disc which have
the marks on pages 9-10.
• Insert the disc with the labeled side facing up.
• Insert the DVD-video with region codes
1 or ALL.
• Check “Parental Lock” setting in
“Playback” menu (page 100).
• You are trying to record onto the protected
disc which is set in “DVD Menu” menu.
• You are trying to record onto the disc
which has no space for recording.
• Release the disc protect setting in “DVD
Menu” menu (page 41).
• Insert the recordable disc with enough
recording space.
• You are trying to record onto the DVDRW/-R on which the number of recording
titles comes up to the maximum (99).
• You are trying to record onto the VR mode
DVD-RW on which the number of recording
chapters comes up to the maximum (999).
• You are trying to record onto the DVD+RW/
+R on which the number of recording titles
comes up to the maximum (49).
• Delete unnecessary titles (pages 82-83).
Recording Error
You cannot record more than 254 chapters on one disc.
(The maximum is 254)
• You are trying to record onto the DVD+RW
on which the number of recording
chapters comes up to the maximum (254).
• Delete unnecessary chapter marks
(page 88).
Recording Error
You cannot record on this disc as Control
Information is full.
• This disc has no space to write the Control
Information when recording or deleting contents.
When editing has been repeatedly performed,
the control Information area may come up to be
full even the recording area has enough space.
• When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
• Every time you insert a disc for recording,
the disc’s working area will be taken up.
And if you repeat this frequently, it will
be used up sooner and you may not be
able to record full 49 titles.
• You are trying to record onto the disc
already finalized.
• You are trying to record onto the
unfinalized +VR mode discs recorded
on other unit.
• Delete unnecessary titles
(pages 82-83).
• Delete unnecessary titles (pages 82-83).
Editing
• Insert a new disc.
• Undo the finalizing for this disc (pages
43-44).
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 46).
Frequently Asked Questions
No, this unit records only DVD.
Possible when the region code of the disc is 1 and All.
No, you cannot control the unit by PC.
Yes, you can. Select “L1 (Rear)” or “L2 (Front)” as your
recording channel, and leave the cable/satellite box on
(pages 23, 50-55).
Others
– Can I record to CD-RW/-R?
– Can I play back DVD-video that is bought in another country?
– Can I connect the unit to my PC?
– Can I program a timer recording with cable/satellite box?
VCR Function
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line to locate an Authorized Service Center.
Function Setup
Recording Error
This disc is already finalized.
Recording Error
The disc has no recording compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
• Delete unnecessary chapter marks
(page 88).
Playback
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
Recording
Recording Error
This disc is protected and not recordable.
Recording Error
Disc is full.
(No area for new recording)
Recording Error
You cannot record more than 99 titles on one disc.
(The maximum is 99)
Recording Error
You cannot record more than 999 chapters on one disc.
(The maximum is 999)
Recording Error
You cannot record more than 49 titles on one disc.
(The maximum is 49)
Recording Error
This program is not allowed to be
recorded on this disc.
• Insert the DVD-RW disc in VR mode
(ver.1.1 or 1.2 compatible with CPRM).
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 9).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• Insert the DVD-RW disc in VR mode
(ver.1.1 or 1.2 compatible with CPRM).
Disc
Management
• You cannot record copy prohibited
programs.
• Set “Format Mode” to “VR mode”
(pages 39-40).
Basic Setup
• You are trying to record the copy
prohibited program.
• You are trying to record the copy-once
program onto the DVD-RW disc in
Video mode.
• You are trying to record the copy-once
program.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• The disc is dirty.
• The disc is damaged.
• You are trying to record the copy-once
program onto the DVD-RW disc which
is not compatible with CPRM.
Connections
Disc Error
— Please eject the disc. —
Playback feature may not be available on this disc.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
Parental Lock On
The current selected parental level
prohibits playback.
Recording Error
This program is not allowed to be recorded.
Recording Error
This program is not recordable in Video
mode.
Recording Error
This program is not recordable in +VR mode.
Recording Error
Cannot record on this disc.
Introduction
TROUBLESHOOTING
EN 117
E9SK0UD_DVR670KU_EN_v1.1.indd 117
2009/04/03 15:40:16
LANGUAGE CODE
Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
118 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 118
2009/04/03 15:40:17
PCM (pulse code modulation)
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Chapter
Component Video Output
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(480i) TV signals. Refer to page 106 for instructions on
selective progressive scan mode.
Region Code
Digital Audio
Sampling Frequency
DivX®
DivX® is a codec (compression/decompression) that can
compress images to a very small amount of data.
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
SAP (secondary audio program)
Sub-audio channel which is delivered separately from
main-audio channel. This audio channel is used as an
alternate in bilingual broadcasting.
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
Title (DVD only)
DTS is a multi channel surround sound system. By
connecting to DTS decoder you can enjoy dynamic and
realistic sound like movie theatre. DTS surround sound
technologies were developed by DTS, Inc.
Track
Finalize
Video mode is the same recording format as used on
the DVD videos you purchase in local shops. You can
play back the discs recorded in this format in most DVD
players, however it offers only limited editing. You will
need to finalize discs recorded in video mode before
playing them back on other unit.
To make DVD, which have been recorded on, possible to
play back in DVD players.
HDMI™ (high definition multimedia interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
JPEG (joint photographic experts group)
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.
Video mode
VR mode
A basic recording format for DVD-RW. VR mode offers
advanced editing, however it is playable only on VR
mode compatible unit. Finalization is recommended
before playing them back on other unit.
WMA (Windows Media™ Audio)
WMA is the audio compressing technology developed by
Microsoft. You can copy WMA files on CD-RW/-R from a
computer and play them back on this unit.
VCR Function
JPEG is a method of compressing still image files. You can
copy JPEG files on CD-RW/-R from a computer and play
back the files on this unit.
Audio CD use tracks to divide up the content of a disc.
The DVD equivalent is called a chapter. See also “Chapter”.
Function Setup
A collection of chapters on DVD. See also “Chapter”.
Editing
DTS® (Digital Theater System)
Playback
Dolby® Digital
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
Recording
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analogto-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Disc
Management
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video (480p),
you can experience higher-density picture than that in
interlace (480i).
Basic Setup
Just as a book is split up into several chapters, a title on a
DVD is usually divided into chapters. See also “Title”.
Progressive Scan (480p)
Connections
Analog Audio
Introduction
GLOSSARY
+VR mode
Others
A recording format for DVD+RW/+R. +VR mode offers basic
editing, and it is playable on most DVD players. Finalization
is recommended before playing them back on other unit.
EN 119
E9SK0UD_DVR670KU_EN_v1.1.indd 119
2009/04/03 15:40:17
SPECIFICATIONS
• This model complies with the below specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
General
VCR video heads
Power requirements
Power consumption
Weight
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV system
Recording
Recording format
Recording discs
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
Input / Output
VHF/UHF antenna input/output terminal
Video input
Input level
Jacks
Video output
Output level
Jack
S-video input
Y (luminance) - Input level
C (color) - Input level
Jacks
S-video output
Y (luminance) - Output level
C (color) - Output level
Jack
Component video output
Output level
Jacks
HDMI output
Jack
Audio input
During audio input
Jacks
Audio output
During audio output
Jacks
Digital audio output
Output level
Jack
DV input
Jack
Four heads
AC120 V, 60 Hz
30 W (standby: 3.3 W)
9.5 lbs ( 4.3 kg )
17.2” x 4.0” x 10.6” (435 x 99.5 x 268 mm)
41 °F to 104 °F (5 °C to 40 °C)
Less than 80% (no condensation)
ATSC / NTSC-M TV standard
VR (video recording) format
Video format
+VR format
DVD-Rewritable/-Recordable, DVD+Rewritable/+Recordable
13.5 MHz
MPEG
48 kHz
Dolby Digital/LPCM (XP Recording mode only)
VHF/UHF set 75Ω
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
RCA jack
Output 1 (rear)
1 Vp-p (75Ω)
RCA jack
Input 1 (rear)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Output 1 (rear)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Output 1 (rear)
Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω)
RCA jacks
HDMI jack
Input 1 (rear), 2 (front) L/R
2 V rms (input impedance: more than 22 kΩ)
RCA jacks
Output 2 L/R (rear)
2 V rms (output impedance: less than 1 kΩ)
RCA jacks
Output 1 (rear) COAXIAL
500 mVp-p (75Ω)
RCA jack
IEEE 1394
DV input jack (4 pin)
120 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 120
2009/04/03 15:40:18
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT
AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED
IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this DAV Product.
Your Responsibility
(1) You must retain your bill of sale or provide other proof of purchase.
(2) All warranty servicing of this DAV Product must be made pursuant
to the TACP DAV Product Warranty Exchange Program.
No person, agent, distributor, dealer, or company is authorized to change,
modify, or extend the terms of these warranties in any manner whatsoever.
The time within which an action must be commenced to enforce any
obligation of TACP arising under the warranty or under any statute or law
of the United States or any state thereof is hereby limited to ninety (90)
days from the date you discover, or should have discovered, the defect.
This limitation does not apply to implied warranties arising under state law.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO
STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, WHEN
AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
(4) Labor service charges for set installation, setup, adjustment of customer
controls, and installation or repair of antenna systems are not covered
by this warranty. Reception problems caused by inadequate antenna
systems are your responsibility.
VCR Function
(5) Warranties extend only to defects in materials or workmanship as
limited above, and do not extend to any DAV Product or parts that
have been lost or discarded by you or to damage to the DAV Product
or parts caused by fires, misuse, accident, Acts of God (such as
lightning or fluctuations in electric power), improper installation,
improper maintenance, or use in violation of instructions furnished by
TACP; use or malfunction through simultaneous use of this DAV Product
and connected equipment; or to units that have been modified or had
the serial number removed, altered, defaced, or rendered illegible.
Function Setup
(3) The warranties from TACP are effective only if the DAV Product is
purchased and operated in the Continental U.S.A. or Puerto Rico.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.
S.A., INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET
FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY
LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU
OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR
OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TACP BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION,
OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY
USE, MISUSE OR INABILITY TO USE THIS DAV PRODUCT).
Editing
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
For additional information, visit TACP’s website: www.tacp.toshiba.com
Playback
Complete and mail the enclosed product registration card or register your
DAV Product on-line at www.tacp.toshiba.com/service as soon as possible.
By registering your DAV Product you will enable TACP to bring you new
products specifically designed to meet your needs and help us to contact
you in the unlikely event a safety notification is required under the U.S.
Consumer Product Safety Act. Failure to complete and return the product
registration card does not diminish your warranty rights.
(2) You must include the original bill of sale (or a copy of the original bill
of sale) or other proof of purchase along with the entire DAV Product
when sending the DAV Product to the TACP Warranty Exchange Center
specified by TACP’s Consumer Solutions Center. You are responsible
for all inbound transportation and insurance charges for the DAV Product
to the TACP Warranty Exchange Center.
Recording
Commercial Units
DAV Products sold and used for commercial purposes have a limited
warranty for all parts and labor, which warranty begins on the date of
original retail purchase and ends on the date that is ninety (90) days
thereafter.
(1) For instructions on how to obtain warranty service for your DAV Product
under the TACP DAV Product Warranty Exchange Program, contact
TACP’s Consumer Solutions Center toll free at 1-800-631-3811.
Disc
Management
Rental Units
The warranty for DAV Product rental units begins on the date of the first
rental or thirty (30) days after the date of shipment to the rental firm,
whichever comes first.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and checking
the section “TROUBLESHOOTING,” you find that service is needed:
Basic Setup
Limited Warranty
TACP warrants this DAV Product and its parts against defects in materials
or workmanship for a period of ninety (90) days after the date of original
retail purchase.
DURING THIS PERIOD, TACP WILL EXCHANGE A DEFECTIVE DAV
PRODUCT WITH A NEW OR REFURBISHED DAV PRODUCT WITHOUT
CHARGE TO YOU. DURING THE PERIOD THAT COMMENCES ON THE
DATE THAT IS NINETY ONE (91) DAYS AFTER THE DATE OF ORIGINAL
RETAIL PURCHASE AND ENDS ON THE DATE THAT IS THREE HUNDRED
SIXTY FIVE (365) DAYS AFTER THE DATE OF ORIGINAL RETAIL
PURCHASE, TACP WILL EXCHANGE A DEFECTIVE DAV PRODUCT
WITH A NEW OR REFURBISHED DAV PRODUCT FOR A FEE.
Connections
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA
AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
Introduction
LIMITED WARRANTY
Limited United States Warranty
Digital Audio Video (“DAV”) Product - Exchange Warranty
(6) This warranty does not cover Product sold AS IS or WITH ALL FAULTS.
Others
EN 121
E9SK0UD_DVR670KU_EN_v1.1.indd 121
2009/04/03 15:40:18
LIMITED WARRANTY
/LPLWHG&DQDGLDQ:DUUDQW\
)RU7RVKLED%UDQG'LJLWDO$XGLR9LGHR3URGXFWV
7RVKLEDRI&DQDGD/LPLWHG7&/PDNHVWKHIROORZLQJOLPLWHGZDUUDQWLHVWRRULJLQDOFRQVXPHUVLQ&DQDGD7+(6(/,0,7('
:$55$17,(6(;7(1'727+(25,*,1$/&21680(5385&+$6(525$1<3(56215(&(,9,1*7+,6726+,%$%5$1'
',*,7$/$8',29,'(2352'8&7WKH'$9352'8&76RU'$93URGXFWV$6$*,)7)5207+(25,*,1$/&21680(5
385&+$6(5$1'721227+(5385&+$6(52575$16)(5((
'$9352'8&76385&+$6(',1&$1$'$$1'86('$1<:+(5(2876,'(2)&$1$'$,1&/8',1*:,7+287/,0,7$7,21
7+(81,7('67$7(6$1'0(;,&2$5(127&29(5('%<7+(6(:$55$17,(6
'$9352'8&76385&+$6('$1<:+(5(2876,'(2)&$1$'$,1&/8',1*:,7+287/,0,7$7,217+(81,7('67$7(6
$1'0(;,&2$1'86(',1&$1$'$$5(127&29(5('%<7+(6(:$55$17,(6
/LPLWHG2QH<HDU:DUUDQW\RQ3DUWVDQG/DERXU
6XEMHFWWRWKHPRUHOLPLWHGZDUUDQW\LIWKH'$93URGXFWLVXVHGIRU
DQ\FRPPHUFLDORUEXVLQHVVSXUSRVHVDVVHWRXWEHORZ7&/
ZDUUDQWVWKH'$93URGXFWDQGLWVSDUWVDJDLQVWPDWHULDOGHIHFWVLQ
PDWHULDOVRUZRUNPDQVKLSWKDWUHVXOWLQWKH'$93URGXFWIDLOLQJIRU
DSHULRGRIRQH\HDUDIWHUWKHGDWHRIRULJLQDOUHWDLOSXUFKDVH
'85,1*7+,63(5,2'7&/:,//$77&/·6237,215(3$,5
255(3/$&($'()(&7,9(3$57:,7+$1(:25
5()85%,6+('3$57:,7+287&+$5*(72<28)25
3$57625/$%285<280867'(/,9(57+((17,5('$9
352'8&772$7&/'$9352'8&7$87+25,=('6(59,&(
3529,'(5$63<2808673$<)25$//
75$163257$7,21$1',1685$1&(&+$5*(6)257+(
'$9352'8&772$1')5207+($63
5HQWDO8QLWV
7KHZDUUDQW\IRU'$93URGXFWUHQWDOXQLWVEHJLQVZLWKWKHGDWHRI
ILUVWUHQWDORUWKLUW\GD\VIURPWKHGDWHRIVKLSPHQWWRWKHUHQWDO
ILUPZKLFKHYHUFRPHVILUVW
/LPLWHG:DUUDQW\IRU&RPPHUFLDO8QLWV
7&/ZDUUDQWV'$93URGXFWVWKDWDUHXVHGIRUDQ\FRPPHUFLDORU
EXVLQHVVSXUSRVHVDVIROORZVDOOSDUWVDUHZDUUDQWHGDJDLQVW
PDWHULDOGHIHFWVLQPDWHULDOVRUZRUNPDQVKLSWKDWUHVXOWLQWKH'$9
3URGXFWIDLOLQJIRUDSHULRGRIQLQHW\GD\VDIWHUWKHGDWHRI
RULJLQDOUHWDLOSXUFKDVH'85,1*7+,63(5,2'7&/:,//
$77&/·6237,215(3$,5255(3/$&($'()(&7,9(3$57
:,7+$1(:255()85%,6+('3$57:,7+287&+$5*(
72<28)253$57625/$%285<280867'(/,9(57+(
(17,5('$9352'8&772$1$63<2808673$<)25$//
75$163257$7,21$1',1685$1&(&+$5*(6)257+(
'$9352'8&772$1')5207+($63
<RXU5HVSRQVLELOLW\
7+($%29(:$55$17,(6$5(68%-(&7727+(
)2//2:,1*&21',7,216
<RXPXVWSURYLGH\RXUELOORIVDOHRURWKHUSURRIRISXUFKDVH
$OOZDUUDQW\VHUYLFLQJRIWKLV'$93URGXFWPXVWEHSHUIRUPHG
E\DQ$63
7KHZDUUDQWLHVIURP7&/DUHHIIHFWLYHRQO\LIWKH'$93URGXFW
LVLSXUFKDVHGDVQHZDQGXQRSHQHGIURP7&/RUIURP7&/·V
DXWKRUL]HGGLVWULEXWRUVGHDOHUVRUUHVHOOHUV$'5·VDQGLL
ORFDWHGRSHUDWHGLQ&DQDGD
:DUUDQWLHVH[WHQGRQO\WRPDWHULDOGHIHFWVLQPDWHULDOVRU
ZRUNPDQVKLSDVOLPLWHGDERYHDQGGRQRWH[WHQGWR
D 6HUYLFHUHSDLUVRUUHSODFHPHQWPDGHQHFHVVDU\E\DFFLGHQW
PLVXVHDEXVHPRLVWXUHOLTXLGVGXVWGLUWQHJOHFWDFFLGHQW
GDPDJHDSSOLFDWLRQVLPSURSHULQVWDOODWLRQLPSURSHU
RSHUDWLRQLPSURSHUFOHDQLQJLPSURSHUPDLQWHQDQFHQRUPDO
ZHDUDQGWHDURUDQ\RWKHUH[WHUQDOFDXVHRUHYHQWDFWRU
RPLVVLRQRXWVLGHWKHFRQWURORI7&/LQFOXGLQJILUHWKHIWDFWV
RI*RGDOWHUDWLRQSRZHUIDLOXUHVSRZHUVXUJHVRUSRZHU
VKRUWDJHVOLJKWQLQJRWKHUHOHFWULFDOIDXOWVRUUHSDLUV
PRGLILFDWLRQVRUUHSODFHPHQWVE\SHUVRQVRWKHUWKDQWKRVH
DXWKRUL]HGE\7&/WRVHUYLFHWKH'$93URGXFW
E 5HSODFHPHQWRIPLVVLQJGLVFDUGHGRUORVWSDUWVWKH
SURYLVLRQRIUHWURILWVRUSUHYHQWLYHPDLQWHQDQFH
F 5HSDLURIGDPDJHWKDWLVFRVPHWLFRQO\RUGRHVQRWDIIHFW
WKH'$93URGXFWIXQFWLRQDOLW\VXFKDVZHDUDQGWHDU
VFUDWFKHVDQGGHQWV
G 6HUYLFHRQ7RVKLEDEUDQGHGDFFHVVRU\LWHPVVXFK
DFFHVVRU\LWHPVPD\EHFRYHUHGE\WKHLURZQZDUUDQW\
H 6HUYLFHRQWKLUGSDUW\SURGXFWVRUVHUYLFHPDGHQHFHVVDU\
E\XVHRILQFRPSDWLEOHWKLUGSDUW\SURGXFWV
I 6HUYLFHPDGHQHFHVVDU\E\WKHVLPXOWDQHRXVXVHRIWKLV
'$93URGXFWDQGFRQQHFWHGHTXLSPHQW
J 0RGLILFDWLRQVWRWKH'$93URGXFWQRWDSSURYHGLQZULWLQJ
E\7&/DQGVHUYLFHPDGHQHFHVVDU\E\WKHXVHRU
LQVWDOODWLRQRIQRQ7RVKLEDPRGLILFDWLRQVWRWKH'$9
3URGXFW
K 6HUYLFHRID'$93URGXFWRQZKLFKWKH726+,%$ODEHORU
ORJRUDWLQJODEHORUVHULDOQXPEHUKDYHEHHQGHIDFHGRU
UHPRYHG
L 2QVLWHVHUYLFHDQGUHSDLURIWKH'$93URGXFW
M 'DPDJHWRWKH'$93URGXFWFDXVHGE\IDLOXUHWRIROORZ
WKHVSHFLILFDWLRQV8VHUPDQXDOVRUJXLGHVDVWRXVDJH
DQGRUVWRUDJH
'LVFODLPHUDQG/LPLWDWLRQRI5HPHG\
727+((;7(1712735(&/8'('%</$:$//27+(5
(;35(66$1',03/,(':$55$17,(6&21',7,216$1'
5(35(6(17$7,216)257+,6'$9352'8&7,1&/8',1*
7+(,03/,(':$55$17,(6$1'&21',7,2162)
0(5&+$17$%,/,7<$1'),71(66)25$3$57,&8/$5
385326($5(+(5(%<',6&/$,0('$1'(;&/8'('
,)7+($33/,&$%/(/$:67$78725<2527+(5:,6(
35(&/8'(67+((;&/86,212)$1<,03/,('
:$55$17,(6&21',7,216$1'5(35(6(17$7,216
7+(168&+,03/,(':$55$17,(6&21',7,216$1'
5(35(6(17$7,216$5(27+(5:,6(/,0,7(',1
'85$7,21727+(7(502)7+,6(;35(66:5,77(1
/,0,7(':$55$17<727+((;7(1712735(&/8'('
%</$:67$78725<2527+(5:,6(7+,6:5,77(1
:$55$17<683(5&('(6$1'63(&,),&$//<',6&/$,06
$1<27+(5:$55$17<&21',7,21255(35(6(17$7,21
12767$7(',17+,6:$55$17<:+(7+(50$'(%<
7&/726+,%$&25325$7,217+(,5$)),/,$7(6$'5V
$1'$63V$1':+(7+(50$'(25$//<25,1:5,7,1*
,1&/8',1*$1<67$7(0(17,1$1<%52&+85(35(66
5(/($6($11281&(0(17$'9(57,6(0(1732,172)
6$/(',63/$<(7&
<2808675($'$1')2//2:$//6(783$1'86$*(
,16758&7,216,17+($33/,&$%/(86(5*8,'(6$1'25
0$18$/6,)<28)$,/72'2627+,6'$9352'8&70$<
127)81&7,213523(5/<$1'<280$<68))(5'$0$*(
7+,6:$55$17<:,//127&29(5$1<6(59,&(7+$7,6
5(48,5(',13$5725,1:+2/($6$5(68/72)$1<
)$,/85(72)2//2:7+(6(783$1'86$*(
,16758&7,2167+,6:$55$17<'2(6127$33/<$1'
6+$//%(92,'$1'81(1)25&($%/(,)7+('$9
352'8&7,623(1('6(59,&('255(3$,5('%<
3(5621627+(57+$17+26($87+25,=('%<7&/72
6(59,&(255(3$,57+('$9352'8&7
122 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 122
2009/04/03 15:40:19
7RWKHH[WHQWSHUPLWWHGE\ODZWKLVOLPLWHGZDUUDQW\VKDOOEH
JRYHUQHGDQGFRQVWUXHGLQDFFRUGDQFHZLWKWKHODZVRI2QWDULR
+RZWR2EWDLQ:DUUDQW\6HUYLFHV
,IDIWHUIROORZLQJDOORIWKHRSHUDWLQJLQVWUXFWLRQVLQWKLVPDQXDO
DQGFKHFNLQJWKH7URXEOHVKRRWLQJVHFWLRQ\RXILQGWKDW
VHUYLFHLVQHHGHG
Recording
7RILQGWKHQHDUHVW$63YLVLW7&/·VZHEVLWHDW
ZZZWRVKLEDFDRUFDOOWROOIUHH
3UHVHQW\RXUELOORIVDOHRURWKHUSURRIRISXUFKDVHWRWKH
$63
)RUDGGLWLRQDOLQIRUPDWLRQYLVLW7&/
VZHEVLWHDWZZZWRVKLEDFD
Disc
Management
,IWKHUHLVDQ\LQFRQVLVWHQF\EHWZHHQWKLVOLPLWHGZDUUDQW\RQ
WKHRQHKDQGDQGDQ\VWDWHPHQWLQWKHSDFNDJLQJRIWKH'$9
3URGXFWRULQDQ\RWKHUGRFXPHQWHQFORVHGZLWKRUXVHGLQWKH
FRQWH[WRIWKHSURPRWLRQRUVDOHRIWKH'$93URGXFWRQWKH
RWKHUKDQGWKHSURYLVLRQVRIWKLVOLPLWHGZDUUDQW\VKDOOSUHYDLO
Basic Setup
Playback
Editing
$UELWUDWLRQDQG'LVSXWH5HVROXWLRQ
7RWKHH[WHQWQRWSUHFOXGHGE\ODZDQ\FODLPGLVSXWH
FRQWURYHUV\RUGLVDJUHHPHQWZKHWKHUIRUEUHDFKRIZDUUDQW\
EUHDFKRIFRQWUDFWWRUWLQFOXGLQJQHJOLJHQFHXQGHUDVWDWXWH
RUXQGHUDQ\RWKHUODZRUIRUPRIDFWLRQDJDLQVWDQ\RIWKH
5HODWHG3DUWLHVDULVLQJRXWRIRURWKHUZLVHUHODWLQJWRLWKLV
ZDUUDQW\LLWKH'$93URGXFWLLLDQ\RUDORUZULWWHQUHSUHVHQWDWLRQV
VWDWHPHQWVEURFKXUHVSUHVVUHOHDVHVDGYHUWLVLQJDQQRXQFHPHQW
SRLQWRIVDOHGLVSOD\RUSURPRWLRQDOPDWHULDOUHODWLQJWRWKH'$9
3URGXFWLYWKHUHODWLRQVKLSVWKDWUHVXOWIURPWKLVZDUUDQW\WKH
IRUHJRLQJFODLPVGLVSXWHVFRQWURYHUVLHVDQGGLVDJUHHPHQWVDUH
FROOHFWLYHO\UHIHUUHGWRDVWKH'LVSXWHVKDOOEHUHIHUUHGWRDQG
UHVROYHGE\ILQDODQGELQGLQJDUELWUDWLRQWRWKHH[FOXVLRQRIWKH
FRXUWV7RWKHH[WHQWQRWSUHFOXGHGE\ODZ\RXDJUHHWRZDLYHDQ\
ULJKWWKDW\RXPD\KDYHWRFRPPHQFHRUSDUWLFLSDWHLQDQ\
UHSUHVHQWDWLYHRUFODVVSURFHHGLQJDJDLQVWWKH5HODWHG3DUWLHV
UHODWLQJWRDQ\'LVSXWH,IDQGZKHUHDSSOLFDEOHDQGWRWKHH[WHQWQRW
SUHFOXGHGE\ODZ\RXIXUWKHUDJUHHWRRSWRXWRIDQ\VXFK
UHSUHVHQWDWLYHRUFODVVSURFHHGLQJV$UELWUDWLRQRIDQ\'LVSXWHZLOO
EHFRQGXFWHGLQWKHIRUXPDQGLQWKHPDQQHUDVDJUHHGWREHWZHHQ
\RXDQG7&/)DLOLQJVXFKDJUHHPHQWWKHDUELWUDWLRQZLOOEH
FRQGXFWHGE\RQHDUELWUDWRUSXUVXDQWWRWKHODZVDQGUXOHVUHODWLQJ
WRDUELWUDWLRQJHQHUDOO\LQIRUFHLQWKHMXULVGLFWLRQLQZKLFK\RXUHVLGH
DWWKHWLPHWKDWWKH'LVSXWHDULVHV7RWKHH[WHQWQRWSUHFOXGHGE\
ODZQRFODLPGLVSXWHFRQWURYHUV\RUGLVDJUHHPHQWRIDQ\RWKHU
SHUVRQPD\EHMRLQHGRUFRPELQHGZLWKDQ\'LVSXWHE\\RXZLWKRXW
WKHSULRUZULWWHQFRQVHQWRI7&/
*HQHUDO3URYLVLRQV
,IDQGWRWKHH[WHQWWKDWDQ\SURYLVLRQRIWKLVOLPLWHGZDUUDQW\
VKRXOGJHQHUDOO\EHIRXQGWREHXQHQIRUFHDEOHWKH
XQHQIRUFHDEOHSURYLVLRQVKDOOEHVHYHUHGIURPWKHZDUUDQW\
DQGGHHPHGQRWWRIRUPSDUWRIWKHZDUUDQW\7KHUHPDLQLQJ
SURYLVLRQVRIWKLVZDUUDQW\VKDOOEHDQGUHPDLQYDOLGDQG
HQIRUFHDEOH,IDQGWRWKHH[WHQWWKDWDQ\SURYLVLRQRIWKLV
OLPLWHGZDUUDQW\DVLWUHODWHVWRDQ\RIWKH5HODWHG3DUWLHVLV
IRXQGWREHLQYDOLGRUXQHQIRUFHDEOHLQUHVSHFWRIWKDWSDUW\
WKH([FOXGHG3DUW\WKH([FOXGHG3DUW\VKDOOEHGHHPHG
WREHVHYHUHGRUH[FOXGHGIURPWKHSURYLVLRQDQGWKHSURYLVLRQ
VKDOOUHPDLQYDOLGHQIRUFHDEOHDQGDSSOLFDEOHLQUHVSHFWRIWKH
RWKHURUUHPDLQLQJ5HODWHG3DUWLHV
Connections
,)7+('$9352'8&7)$,/672:25.$6:$55$17('$%29(
<28562/($1'(;&/86,9(5(0('<6+$//%(5(3$,525
5(3/$&(0(172)7+('()(&7,9(3$57,112(9(17:,//
7&/726+,%$&25325$7,217+(,5$)),/,$7(6$'5V25
$63V7+(5(/$7('3$57,(6%(/,$%/(72<2825$1<
7+,5'3$57<)25$1<'$0$*(6021(<5(,0%856(0(17
&267625(;3(16(67+,6/,0,7$7,21$33/,(672'$0$*(6
021(<5(,0%856(0(17&267625(;3(16(62)$1<.,1'
:+$762(9(5,1&/8',1*$1<',5(&725,1',5(&7'$0$*(6
'$0$*(723523(57<253(5621/267352),76/267
6$9,1*6,1&219(1,(1&(2527+(563(&,$/,1&,'(17$/
(;(03/$5<25&216(48(17,$/'$0$*(6:+(7+(5)25
%5($&+2):$55$17<%5($&+2)&2175$&77257
,1&/8',1*1(*/,*(1&(81'(5$67$787(2581'(5$1<
27+(5/$:25)25025$&7,2125:+(7+(5$5,6,1*287
2)7+(86(2)25,1$%,/,7<7286(7+('$9352'8&7
(9(1,)$1<2)7+(5(/$7('3$57,(6+$6%((1$'9,6('2)
7+(3266,%,/,7<2)68&+'$0$*(6252)$1<&/$,0%<
$1<27+(53$57<
1RSHUVRQDJHQWGLVWULEXWRUGHDOHURUFRPSDQ\LVDXWKRUL]HGWR
FKDQJHPRGLI\RUH[WHQGWKHWHUPVRIWKHVHZDUUDQWLHVLQDQ\
PDQQHUZKDWVRHYHU
Introduction
LIMITED WARRANTY
Function Setup
&ULWLFDO$SSOLFDWLRQV
7KH'$93URGXFW\RXKDYHSXUFKDVHGLVQRWGHVLJQHGIRUDQ\´FULWLFDO
DSSOLFDWLRQVµ´&ULWLFDODSSOLFDWLRQVµPHDQVOLIHVXSSRUWV\VWHPV
PHGLFDODSSOLFDWLRQVFRQQHFWLRQVWRLPSODQWHGPHGLFDOGHYLFHV
FRPPHUFLDOWUDQVSRUWDWLRQQXFOHDUIDFLOLWLHVRUV\VWHPVRUDQ\RWKHU
DSSOLFDWLRQVZKHUH'$93URGXFWIDLOXUHFRXOGOHDGWRLQMXU\WRSHUVRQV
RUORVVRIOLIHRUFDWDVWURSKLFSURSHUW\GDPDJH
VCR Function
,)7+(&86720(586(67+('$9352'8&7,1$1<&5,7,&$/
$33/,&$7,217+(&86720(5²$1'1277&/,76$)),/,$7(6
$'5V25$63V²$6680(62/($1')8//5(63216,%,/,7<)25
68&+86(7&/5(6(59(67+(5,*+7725()86(726(59,&(
$1<'$9352'8&786(',1$&5,7,&$/$33/,&$7,217&/,76
$)),/,$7(6$'5V$1'$63V+(5(%<',6&/$,0$1<$1'$//
/,$%,/,7<'$0$*(6$1'&216(48(1&(6$5,6,1*2872)7+(
6(59,&(255()86$/726(59,&(68&+'$9352'8&7$1'
)857+(5',6&/$,0$1<$1'$///,$%,/,7<&216(48(1&(6$1'
'$0$*(67+$70$<$5,6(255(68/7)5207+(86(2)7+(
'$9352'8&7,1$1<&5,7,&$/$33/,&$7,216
Others
EN 123
E9SK0UD_DVR670KU_EN_v1.1.indd 123
2009/04/03 15:40:20
MEMO
124 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 124
2009/04/03 15:40:21

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project