TOSHIBA LF400 LF410, LF420, LF430 Electromagnetic Flowmeter Operation Guide
Below you will find brief information for Electromagnetic Flowmeter LF400 LF410, Electromagnetic Flowmeter LF400 LF400, Electromagnetic Flowmeter LF400 LF420 and Electromagnetic Flowmeter LF400 LF430. These flowmeters are designed for measuring the volume of liquids and gases flowing through pipes. You will find detailed instructions on how to operate and configure these flowmeters. Make sure to carefully review the specified settings and ranges for optimal performance. You will find detailed instructions on how to use the various functions, such as totalization and data logging.
advertisement
▼
Scroll to page 2
TOSHIBA Ver.1.0 (Aug, 1998) Electromagnetic Flowmeter LF400 Series Operation Guide LF410/LF400 LF420 LF430 Eo SET - mure abe a AED SET SR @Setting Menu® Note: key means “Totalizer Start/Stop” [ P] key means “Totalizer Reset” in the measurement mode. MB When this function is set to ON, the conditions are follows [tems |] Condtions indicating | Instaneous flow rates and flow velocity (no totalization). *9:(1)In case of the zero adjustment (Menu No. Zero offset is automatically cleared to Zero. (2) Calculate the zero offset value with the following equation: — [Entering value [I Selecting value [Entering and selecting value Changed value ФАссигасу@ TBK15006 99-9(TDOC/Z)
advertisement
Key Features
- Measure flow rates
- Display real-time data
- Totalization of flow
- Customizable settings
- Data logging
- Zero offset adjustment
- Range Selection
- Pulse output
- Analog output
- Remote configuration
Frequently Answers and Questions
How do I adjust the zero offset?
To adjust the zero offset, access Menu No. 9 in the setting menu and follow the instructions to clear the offset or calculate a new value.
Can I use the flowmeter to measure both liquids and gases?
Yes, the flowmeter can be used to measure both liquids and gases, but you need to select the appropriate settings based on the fluid you are measuring.
How do I switch between measurement modes?
You can switch between measurement modes using the dedicated keys on the flowmeter. The 'key' is used for totalizer start/stop, while the 'key' is used for totalizer reset. Refer to the user manual for details on each mode.
Related manuals
Download
PDF
advertisement