1250W PowerVerter RV Inverter/Charger with Hardwire Input/Output RV1250ULHW

1250W PowerVerter RV Inverter/Charger with Hardwire Input/Output  RV1250ULHW
1250W PowerVerter RV Inverter/Charger with
Hardwire Input/Output
MODEL NUMBER: RV1250ULHW
Highlights
12V DC or 120V AC input; 120V
AC output (hardwired)
1250 watts continuous and 2500
watts DoubleBoost inverter output
3 stage, 14/55 amp selectable
wet/dry cell battery charger
Built-in Isobar® premium AC
surge protection and Auto
Transfer Switching option for
battery backup / UPS operation
Tested to power inverter
standards UL458 (USA) and
CSA (Canada)
High reliability large-transformer
design with protected DC and AC
wiring terminals
Description
Tripp Lite RV1250ULHW Inverter/Charger is the quiet alternative to gas generators with no fumes, fuel or noise to
deal with! It provides equipment with utility- or generator-supplied AC electricity filtered through premium ISOBAR
surge protection. This DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system
serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged RV
applications. Supplies up to 1250 watts of continuous 120V AC power from any 12V DC battery or automotive
DC source. OverPower TM inverter output feature temporarily provides up to 150% of the continuous output for
1-60 minutes, and DoubleBoost TM inverter output feature delivers up to 200% of the continuous output for up to
10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When
hardwire AC input is energized, commercial power passes through to connected equipment and the battery set
is recharged via 3 stage, selectable 14/55 amp charging system. In UPS mode, the APS system responds to
blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output.
Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see
owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and
Applications
Versatile inverter/charger system
with auto-transfer switching
serves as an automotive inverter
for RVs, over-the-road trucking,
conversion vans and fleet service
vehicles; a standalone alternative
power source for off-grid,
alternative energy or export
applications and as an
uninterruptible power supply
(UPS) for items compatible with a
16.6 millisecond transfer time.
Package Includes
UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable
RV1250ULHW Inverter/Charger
large transformer design, with frequency control powers resistive electronic loads or large inductive motors,
Instruction manual with warranty
compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch
information
with full status LEDs provides remote power inverter on/off switching and continuous status information
(APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of
applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 200a should be positioned no more than 18" from the
RV1250ULHW's battery in the positive line.
Features
RV1250ULHW serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
Supports 120V AC output from a 120V AC line power source or 12V DC battery
source
1/5
Supports 120V AC output from a 120V AC line power source or 12V DC battery source
16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment
compatible with a one cycle transfer time
1250 watts continuous AC output in inverter mode, 2400 watts continuous AC output in AC mode
Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results,
utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and
allow inverter/charger to fully cool before and after OverPower usage.)
3 stage, selectable 14/55 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
Protected hardwire output passes 120V line power or inverter output through to connected equipment
Reliability enhanced large-transformer design tested to UL (USA) and CSA (Canada) standards
Moisture-resistant construction enables vehicular or marine operation in high humidity environments
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full
battery charge when AC is present without auto transfer and SYSTEM OFF settings
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and
selectable 75/85/95/105V AC low voltage auto transfer during brownouts
Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery
charger low/high settings
Resettable 12A charger AC input breaker and resettable 20A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and
temperature related failures
Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes
user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes
user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged
Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
Includes battery temperature sensor with 20 foot cable to prolong battery life by adjusting the charge level based on battery temperature
Automatic Generator Starter jack enables user configuration of automatic generator startup as inverter batteries drop to 11.5VDC and generator shutoff
as inverter batteries are recharged to 14.1VDC
Specifications
OVERVIEW
Style
Heavy-duty with built-in battery charger
OUTPUT
Frequency Compatibility
60 Hz
Output Receptacles
Hardwire
Output (Watts)
1250
2/5
Continuous Output Capacity (Watts)
1250
Peak Output Capacity (Watts)
2500
Output Nominal Voltage
120V
Output Voltage Regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
Output Frequency Regulation
60 Hz (+/- 0.3 Hz)
Overload Protection
Includes 12A input breaker dedicated to the charging system and 20A output breaker for AC output loads
INPUT
Nominal Input Voltage(s) Supported
120V AC
Recommended Electrical Service
DC INPUT: Requires 12V DC input source capable of delivering 95A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
applications, professional hardwire
Maximum Input Amps / Watts
DC INPUT: Full continuous load - 95A at 12V DC. AC INPUT: 20 amps at 120V AC with full inverter and charger load
(12A max charger-only / combined input load to support charger and AC output is automatically controllable to
66%-33%-0% based on AC output lo
Input Connection Type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: hardwire
Input Cord Length Details
DC INPUT: User supplies cabling. 4 gauge or larger (see manual). AC INPUT: hardwire
Voltage Compatibility (VAC)
120
Voltage Compatibility (VDC)
12
BATTERY
Expandable Battery Runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC System Voltage (VDC)
12
Battery Pack Accessory (Optional)
98-121 sealed lead acid battery (optional)
Battery Charge
14A / 55A (selectable)
LVC (Low Voltage Cut-Off)
10V DC +/-3%
LEDS ALARMS & SWITCHES
Switches
3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant
on/off control of the inverter system when used in conjunction with APSRM4 accessory (sold separately) in inverter
mode.
Front Panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating
600
PHYSICAL
Shipping Dimensions (hwd / in.)
12.5 x 11 x 10.75
3/5
Shipping Dimensions (hwd / cm)
31.75 x 27.94 x 27.31
Shipping Weight (lbs.)
24.9
Shipping Weight (kg)
11.3
Unit Dimensions (hwd / in.)
7 x 8.75 x 9
Unit Dimensions (hwd / cm)
17.78 x 22.23 x 22.86
Unit Weight (lbs.)
23.3
Unit Weight (kg)
10.57
Cooling Method
Multi-speed fan
Material of Construction
Polycarbonate
Form Factors Supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL
Relative Humidity
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to
Battery Mode)
16.6 milliseconds (typical - compatible with many computers - verify transfer time compatibility of loads for UPS
applications)
Low Voltage Transfer to Battery
Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95,
105V - see manual)
High Voltage Transfer to Battery
Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to
145 - see manual)
SPECIAL FEATURES
Load Sensing
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off
and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of
any level.
Remote Control Capability
Yes
CERTIFICATIONS
Certifications
Tested to UL458 (USA) and CSA (Canada)
WARRANTY
Product Warranty Period (U.S. &
Canada)
30-month limited warranty
Product Warranty Period
(International)
1-year limited warranty
Product Warranty Period (Mexico)
30-month limited warranty
4/5
Product Warranty Period (Puerto
Rico)
30-month limited warranty
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
5/5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement