TRENDnet TU2-H2PC USB 2.0 CardBus PC Card User's Guide

TRENDnet TU2-H2PC USB 2.0 CardBus PC Card User's Guide

Trendnet TU2-H2PC is a USB 2.0 2-Port CardBus PC Card that allows you to connect multiple peripherals to your PC simultaneously. It's backward compatible with USB 1.1 devices, providing full 480Mbps of data transmit speed, making it ideal for instant and massive data transfer. The device is easy to install and supports hot-swapping, so you can connect and disconnect devices without turning off your system. It's compatible with Windows 98 SE, ME, 2000, XP, 2003 Server, and Mac OS X 10.x or above.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

TU2-H2PC USB 2.0 CardBus PC Card User's Guide | Manualzz

TABLE OF CONTENTS

Introduction

… … … … … … … … … … … … … . . . … … … … … … … … … … …

2

Package Contents

…………………………………………………………………2

Safety Instructions

…………………………………...……………………………

2

Specification

……………………….…………………………………………..………3

System Requirements

……………………… ………………………………..…3

Hardware Installation

………………………………………………….…………4

Driver Installation

…………………………………………………………………...4

Windows 98SE, ME……………………………………………….…………….4

Windows 2000, XP, 2003……………………………………………………...10

Mac OS X………………………………………………………………………...11

Installation Verification

……………………………………………………..…14

Windows 98…………………………………………………………………..…15

Windows ME………………………………………………………………… ...15

Windows 2000………………………………………………………………… 15

Windows XP/2003

Server……………………………………………….……16

Certificate

………………………………………………………………..……………...17

Disclaimer

………………………………………………………………………….…17

1

Introduction

Thank you for purchasing our USB 2.0 2-Port CardBus PC Card. This handy device is certified to USB 2.0 standards and is backward compatible with USB

1.1 devices, i.e. your existing USB 1.1 devices can function as usual. It also allows you to connect multiple peripherals devices to your PC at the same time.

This high-speed USB 2.0 2-Ports CardBus PC Card improves performance of connected devices by providing a full 480Mbps of data transmit speed (40 times faster than USB 1.1 and 20% faster than IEEE 1394 FireWire), making it ideal for instant and massive data transfer.

Package Contents

z 1 x USB 2.0 2-Port CardBus PC Card z 1 x Driver CD z 1 x Multi-Language Quick Installation Guide

Safety Instructions

1. Always read the safety instructions carefully.

2. Keep the User’s Manual for reference.

3. Lay this equipment on a reliable flat surface before setting it up.

4. If any of the following situations arises, please contact a service technician for diagnostics: z The equipment has been exposed to moisture z The equipment has been dropped or damaged z If the equipment has an obvious sign of breakage z The equipment has not been working well or it is still not functioning after you refer to the User’s Manual

2

Specification

Compliant with Universal Serial Bus Specification Revision 2.0

● Compliant with Universal Serial Bus Specification Version 2.0 (Data rate

1.5/12/480 Mbps) transfer speeds of up to 480 Mbps

Compliant with Open Host Controller Interface Specification for USB 1.0a

Compliant with Enhanced Host Controller Interface Specification for USB 1.0

Provides 2 External USB2.0 Type-A Ports

● Automatically Switches to the Peripheral's Highest Supported Speed

Supports 32-Bit CardBus Type II Slots

Improves peripheral performance for: Scanners, PC Cameras, Printer,

Device Storage Units, Broadband Network Connections

Transfer Rate: 1.5/12/480 Mbps

● USB Spec: v2.0 and v1.1 Compatible

Operating Temperature: 5°C ~ 40°C

Storage Temperature: 0°C ~70°C

Humidity: 0 ~ 80%

System Requirements

IBM compatible PC or Mac system with available CardBus port

With one of the following operating systems: z Windows

®

98 SE z Windows

®

ME z Windows

®

2000 z Windows

®

XP z Windows ®

2003 Server z Mac OS 10.x or above

3

Hardware Installation

Please find the CardBus port of your system, and insert the USB 2.0 2-Port

CardBus Card into the port. The USB 2.0 2 Ports CardBus Card supports hot-swappable, there is no need to turn off your system before the installation.

Driver Installation

Windows 98SE, ME

1. After the CardBus Card has been inserted into the CardBus slot, the system displays This wizard searches for new drives for: NEC USB Open Host

Controller, please click Next

4

2. Please select Search for the best driver for your device. (Recommended), and click Next.

5

3. Do not select any option, and click Next.

4. Select The updated driver (Recommended), and click Next

6

5. When the system displays Windows driver file search for the device: NEC

USB Open Host Controller, please click Next.

6. Please insert Win98 SE CD-ROM into the CD-ROM Drive when the system requests as below, and click OK.

7

7. Please browse the location of the driver in the Win98SE CD-ROM and click

OK.

8. Please click Finish.

8

9. Click Yes when the system requests you to restart your computer.

10. After the system restarted, please insert the attached CD-ROM into the

CD-ROM drive and double-click the Setup.exe file in the F:\Driver\Windows folder (F means the CD-ROM drive).

11. Follow the instructions to finish the installation.

9

Windows 2000, XP, 2003

1. Make sure the CardBus is inserted into the CardBus slot and turn on power then insert the attached driver CD-ROM into CD-ROM drive

2. The system will detect the new device, and there will be a pop-up window, please click Cancel button as needed.

3. Double-click the Setup.exe file in the F:\Driver\Windows folder (F means the CD-ROM drive).,

4. Follow the instructions to finish the installation.

10

Mac OS X

1. Click USB2EHCI-v1072.img.bin in the CD-ROM drive, and it will generate

USB2EHCI_v1064.img

2. Click USB2EHCI_v1072.img, it will generate USB2EHCI-v1072 on Desktop

3. Click USB2EHCI-v1072 on Desktop, there will be a pop-up window.

4. Click USB2EHCI_v1072.

11

5. Please click the to make changes.

6. Enter the name and password, and click OK.

7. Click Continue

12

8. Please select a appropriate destination to install driver, and click

Continue

9. Click Install.

10. Click Continue Installation

12. Click Restart. After restarting the system, the device is ready to be used.

13

Installation Verification

Windows 98 SE

14

Windows ME

Windows 2000

15

Windows XP/2003 Server

16

Certificate

FCC

This equipment has been tested and found to comply with Part 15 of the FCC

Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that may cause undesired operation.

CE – Certificate

This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B

Disclaimer

Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. No part of this document can be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the express written permission of the manufacturer.

17

Limited Warranty

TRENDware warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.

TU2-H2PC – 2 Years Warranty

If a product does not operate as warranted above during the applicable warranty period, TRENDware shall, at its option and expense, repair the defective product or part, deliver to customer an equivalent product or part to replace the defective item, or refund to customer the purchase price paid for the defective product.

All products that are replaced will become the property of TRENDware.

Replacement products may be new or reconditioned.

TRENDware shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDware pursuant to any warranty.

There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.

Warranty service may be obtained by contacting TRENDware office within the applicable warranty period for a Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDware must be pre-authorized by TRENDware with RMA number marked on the outside of the package, and sent prepaid, insured and packaged appropriately for safe shipment.

WARRANTIES EXCLUSIVE: IF THE TRENDWARE PRODUCT DOES NOT

OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY

18

SHALL BE, AT TRENDWARE’S OPTION, REPAIR OR REPLACEMENT. THE

FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN

LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN

FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. TRENDWARE NEITHER ASSUMES NOR

AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION

MAINTENANCE OR USE OF TRENDWARE’S PRODUCTS.

TRENDWARE SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS

TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN

THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR

ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR

TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY

OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY

ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW

TRENDWARE ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY

LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING

NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL,

OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR

PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR

OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE

SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE,

OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND

LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE

PURCHASE PRICE PAID, AT TRENDWARE’S OPTION. THIS DISCLAIMER

OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY

PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

Governing Law: This Limited Warranty shall be governed by the laws of the state of California.

AC/DC Power Adapter, Cooling Fan, and Power Supply carry

1 Year Warranty

19

20

advertisement

Key Features

  • High-speed data transfer rate (480Mbps)
  • Backward compatibility with USB 1.1 devices
  • Hot-swappable feature
  • Two high-speed USB ports
  • Supports 32-bit CardBus Type II Slots

Frequently Answers and Questions

What operating systems does this device support?
This device supports Windows 98SE, ME, 2000, XP, 2003 Server and Mac OS 10.x or above.
How do I install the drivers for this device?
The installation process involves inserting the CardBus card into the CardBus slot and then inserting the driver CD-ROM into the CD-ROM drive. Follow the on-screen instructions to complete the installation.
What are the benefits of using this device?
This device offers enhanced performance for your connected peripherals due to its high-speed data transfer rate, backward compatibility, and hot-swappable feature.

Related manuals

Download PDF

advertisement