How To Setup ActiveSync via Bluetooth Adapter Bluetooth Setup Wizard

How To Setup ActiveSync via Bluetooth Adapter  Bluetooth Setup Wizard
How To Setup ActiveSync via Bluetooth Adapter
Step 1
Right-click on the Bluetooth icon in your Taskbar and start the Bluetooth Setup Wizard.
Step 2
Go through the Bluetooth Setup Wizard. Select the “I want to find a specific Bluetooth device
and configure how this computer will use its services” option:
Step 3
Select the Device that the computer has found
Step 4
Click on Skip Pairing
Step 5
Select the Service that the computer has found on the selected device (ActiveSync):
Step 6
Configure the Service to use the Com Port (e.g. COM 4)
Step 7
In the Bluetooth Configuration, under General tab, name your PC
Step 8
Under Local Services make sure that the ActiveSync is there:
Step 9
In ActiveSync open up Connection Settings and select the ”Allow serial cable or infrared
connection to this COM port” option. Make sure you select the same COM port that the
Bluetooth service was set to (COM4 in our example).
Step 10
Open up ActiveSync:
Step 11
On your Hand Held Device get into the Bluetooth settings. Ask the unit to discover your
computer.
Step 12
When it has found your computer, highlight the name of the computer and update Services.
It should find ActiveSync. Click on it and will either ask you to register the service or pair with the
unit.
Step 13
When the service is set up a Screen for setting up a partnership will appear. Go through the
Wizard and select your preferences:
When the Setup is complete you can either do an ActiveSync manually via the computer or the
Hand Held Device.
~ End of Document ~
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement