Volvo S60 S60R Automobile User Manual

Volvo S60 S60R Automobile User Manual
DEAR VOLVO OWNER
THANK YOU FOR CHOOSING VOLVO
We hope that you will enjoy many years of driving pleasure in
your Volvo. The car has been designed for the safety and comfort of you and your passengers. Volvo is one of the safest
cars in the world. Your Volvo has also been designed to satisfy
all current safety and environmental requirements.
In order to increase your enjoyment of the car, we recommend
that you familiarise yourself with the equipment, instructions
and maintenance information contained in this Owner’s
Manual.
Contents
00 Introduction
01 Safety
02 Instruments and controls
Introduction ......................................... 6
Volvo Car Corporation and the
environment......................................... 7
Seatbelts .......................................... 12
Airbag system .................................. 15
Airbags (SRS) ................................... 16
Activating/deactivating the airbag
(SRS) ................................................ 19
Side airbags (SIPS bags) .................. 21
Inflatable Curtain (IC) ....................... 23
WHIPS .............................................. 24
When the systems deploy ................ 26
Child safety ...................................... 27
Overview, left-hand drive car ............36
Overview, right-hand drive car ..........38
Combined instrument panel .............40
Indicator and warning symbols .........41
Information display ...........................44
Switches in the centre console .........45
Lighting panel ...................................49
Left-hand stalk switch ......................51
Trip computer ....................................52
Right-hand stalk switch ....................53
Cruise control (option) ......................55
Steering wheel adjustment, parking
brake .................................................56
Electrical socket, cigarette lighter .....57
Power windows .................................58
Rearview and door mirrors ...............61
Power sunroof (option) ......................65
2
Contents
03 Climate control
04 Interior
05 Locks and alarm
General information on climate
control .............................................. 70
Manual climate control, AC .............. 72
Electronic climate control, ECC
(option) ............................................. 74
Air distribution .................................. 77
Fuel-driven heater (option) ............... 78
Front seats ........................................82
Interior lighting ..................................84
Storage spaces in the passenger
compartment ...................................86
Rear seat ...........................................90
Cargo area ........................................92
Keys and remote controls ................. 96
Locking and unlocking ..................... 99
Child safety locks ........................... 103
Alarm (option) ................................. 104
3
Contents
06 Starting and driving
07 Wheels and tyres
08 Car care
General ........................................... 110
Refuelling ........................................ 113
Starting the car ............................... 115
Manual gearbox .............................. 118
Automatic gearbox ......................... 119
Brake system .................................. 123
Stability and traction control
system ............................................ 125
Active chassis – FOUR-C ............... 127
Parking assistance .......................... 128
Towing and recovery ....................... 130
Start assistance .............................. 132
Driving with a trailer ....................... 133
Towing equipment .......................... 135
General ........................................... 154
Tyre pressure .................................. 157
Warning triangle and spare wheel .. 159
Tyre pressure monitoring (option) .. 161
Changing wheels ............................ 163
Cleaning ..........................................168
Touching up paintwork .................... 171
Rustproofing ................................... 172
Detachable towbar ......................... 137
Load on the roof ............................. 142
Adjusting headlamp pattern .......... 144
BLIS (Blind Spot Information
System) – option ............................. 149
4
Contents
09 Maintenance and service
10 Infotainment system
11 Specifications
Volvo service ...................................176
Self-maintenance ........................... 177
Bonnet and engine compartment .. 178
Diesel .............................................. 179
Oils and fluids ................................ 180
Wiper blades .................................. 184
Battery ........................................... 185
Replacing bulbs ............................. 188
Fuses .............................................. 195
Overview HU-450 ............................206
Overview HU-650............................ 207
Overview HU-850............................ 208
Audio functions HU-450/650/850 ...209
Audio functions HU-450 .................210
Audio functions HU-650/850 .......... 211
Radio functions HU-450/650/850 ...212
Radio functions HU-450 .................213
Radio functions HU-650/850 ..........214
Radio functions HU-450/650/850 ...215
Cassette player HU-450 ..................220
CD player HU-650 ...........................221
Internal CD changer HU-850 ..........222
External CD changer
HU-450/650/850 (option) ................223
Dolby Surround Pro Logic II
HU-850 ...........................................224
Technical data .................................225
Phone functions (option) .................226
Call options .....................................229
Memory functions ...........................232
Menu functions ...............................234
Miscellaneous information ..............239
Type designation ............................. 242
Dimensions and weights ............... 243
Engine specifications ..................... 244
Engine oil ........................................ 246
Fluids and lubricants ...................... 249
Fuel ................................................. 250
Catalytic converter ......................... 253
Electrical system ............................ 254
5
Introduction
Introduction
Owner’s Manual
A good way of getting to know your new car
is to read the owner’s manual, ideally before
your first journey. This will give you the opportunity to familiarise yourself with new
functions, to see how best to handle the car
in different situations, and to make the best
use of all the car’s features.
Please pay attention to the safety instructions contained in the manual.
NOTE
Volvo cars are adapted for the varying requirements of different markets, as well as
for national or local legal requirements and
regulations.
The specifications, design features and illustrations in this owner’s manual are not binding. We reserve the right to make modifications without prior notice.
© Volvo Car Corporation
WARNING
"Warning!" texts indicate where there is a
risk of personal injury in the event of the instructions not being followed.
IMPORTANT
"Important!" texts indicate a risk of damage
to the car in the event of the instructions not
being followed.
The equipment described in the owner’s
manual is not present in all models. In addition to standard equipment, this manual also
describes options (factory fitted equipment)
and certain accessories (extra equipment).
6
Introduction
Volvo Cars and the environment
Volvo Car Corporation’s
environmental philosophy
Environmental care, safety and quality are
the three core values which influence all operations of the Volvo Car Corporation. We
also believe that our customers share our
consideration for the environment.
Your Volvo complies with strict international
environmental standards and is also manufactured in one of the cleanest and most resource-efficient plants in the world. Volvo
Car Corporation has global certification to
the ISO 14001 environmental standard,
which supports work within the area of the
environment.
EPI (Environmental Product Information) is
supplied for all Volvo models. You can now
compare the environmental impact of different models and engines during the entire lifecycle.
Read more at www.volvocars.com/EPI.
Fuel consumption
Volvo cars have competitive fuel consumption in each of their respective classes. Lower fuel consumption generally results in lower
emission of the greenhouse gas, carbon dioxide.
It is possible for the driver to influence fuel
consumption. For more information read under the heading Reducing environmental impact on page 9.
7
Introduction
Volvo Cars and the environment
Efficient emission control
Your Volvo is manufactured following the
concept Clean inside and out – a concept
that encompasses a clean interior environment as well as highly efficient emission control. In many cases the exhaust emissions are
well below the applicable standards.
In addition there is a special radiator coating,
PremAir®1, which can convert hazardous
ground-level ozone into pure oxygen when
the ozone passes the radiator. The higher the
ozone content in the air the more ozone is
converted.
Clean air in the passenger
compartment
A passenger compartment filter prevents
dust and pollen from entering the passenger
compartment via the air intake.
A sophisticated air quality system, IAQS2
(Interior Air Quality System) ensures that the
incoming air is cleaner than the air in the traffic outside.
The system consists of an electronic sensor
and a carbon filter. The incoming air is moni-
8
1
Option for 5-cylinder engines.
PremAir ® is a registered trademark of
Engelhard Corporation.
2
Option
tored continuously and if there is an increase
in the level of certain unhealthy gases such
as carbon monoxide then the air intake is
closed. Such a situation may arise in heavy
traffic, queues and tunnels for example.
The entry of nitrous oxides, ground-level
ozone and hydrocarbons is prevented by the
carbon filter.
Textile standard
The interior of a Volvo is designed to be
pleasant and comfortable, even for people
with contact allergies and for asthma sufferers. All of our upholstery and interior textiles
are tested with respect to certain unhealthy
substances and allergens as well as emissions. This means that all textiles fulfil the requirements in the Öko-Tex 100 standard3, a
major advance towards a healthier passenger compartment environment.
Öko-Tex certification covers seatbelts, carpets, thread and fabrics for example. The
leather in the upholstery undergoes chromium-free tanning with natural plant substances and fulfils the certification requirements.
3
More information on www.oekotex.com
Volvo workshops and the environment
Regular maintenance creates the conditions
for a long service life for the car with low fuel
consumption, and this way you contribute to
a cleaner environment. When Volvo’s workshops are entrusted with the repair and
maintenance of the car, it becomes part of
our system. We make clear demands regarding the way in which our workshops are designed in order to prevent spills and discharges into the environment. Our workshop
staff have the knowledge and the tools required to guarantee good environmental
care.
Introduction
Reducing environmental impact
You can help reduce environmental impact,
for example, by driving economically, by purchasing eco-labelled car care products and
by servicing and maintaining the car according to the instructions in the owner’s manual.
The following hints will help you to do your bit
for the environment:
• Decrease fuel consumption by choosing
ECO tyre pressure, see page 157.
• Since a roof load and ski
box increase air resistance, leading to significantly higher fuel
consumption, they
should be removed immediately after use.
• Remove unnecessary items from the car the greater the load the higher the fuel
consumption.
• Is your car equipped with an engine block
heater? If so, use it for a few hours before
starting from cold to reduce fuel consumption and exhaust emissions.
• Drive gently and avoid braking too hard.
• Drive in the highest gear
possible. Low engine
speeds result in lower fuel
consumption.
• Ease back on the accelerator on downhill gradients.
• Use engine braking to slow down.
• Avoid idling. Take consideration of local
regulations. Switch off the engine in longer
stationary traffic.
• Always dispose of environmentally hazardous
waste, such as batteries
and oils, in an environmentally safe manner. If
uncertain, consult an authorised Volvo workshop
for advice.
• Service your car regularly.
• High speed increases consumption considerably due to increased wind resistance. A doubling of speed increases wind
resistance four times.
These hints will help you to reduce your fuel
consumption without increasing your travel
time or lessening the enjoyment of driving.
Apart from being kind to your car, you’ll be
saving money - and the Earth’s resources.
9
Seatbelts .................................................................................................. 12
Airbag system .......................................................................................... 15
Airbags (SRS) ........................................................................................... 16
Activating/deactivating the airbag (SRS) .................................................. 19
Side airbags (SIPS bags) .........................................................................21
Inflatable Curtain (IC) ...............................................................................23
WHIPS ......................................................................................................24
When the systems deploy ........................................................................26
Child safety ..............................................................................................27
10
SAFETY
01
01 Safety
01
Seatbelts
Always use a seatbelt
feed the belt in by hand so that it does not
hang lose.
WARNING
Each belt is intended for one person only.
The belt locks and cannot be withdrawn
• if it is pulled out too quickly.
• during braking and acceleration.
• if the car leans heavily.
It is important that the belt lies against the
body so it can provide maximum protection.
Do not lean the backrest too far back. The
seatbelt is designed to protect in a normal
seating position.
Tensioning the hip strap. The belt must be
positioned low down.
Heavy braking can have serious consequences if seatbelts are not used. Ensure
that all passengers use their seatbelts.
Putting on a seatbelt
– Pull the belt out slowly and secure it by
pressing the buckle into the lock. A loud
"click" indicates that the belt has locked.
Releasing the belt
– Press the red lock button and let the belt
retract. If the belt does not retract fully,
12
Keep in mind the following:
• do not use clips or anything else that can
prevent the belt from fitting properly.
• ensure the belt is not be twisted or caught
on anything.
• the hip strap must be positioned low down
(not over the abdomen).
• tension the hip strap over the lap by
pulling the diagonal shoulder belt as
illustrated.
WARNING
The seatbelts and airbags interact. If a seatbelt is not used or is used incorrectly, this
may diminish the protection provided by the
airbag in the event of a collision.
WARNING
Never modify or repair the belt yourself.
Contact an authorised Volvo workshop. If
the belt has been subjected to a major load,
such as in a collision, the entire belt must be
replaced. Some of the belt’s protective
properties may have been lost even if the
belt does not appear damaged. The belt
should also be replaced if it shows signs of
wear or damage. The new belt must be
type-approved and designed for installation
at the same location as the replaced belt.
01 Safety
Seatbelts
Seatbelt reminder
The seatbelt warning symbol in the combined instrument panel and above the rearview mirror illuminates until the driver and
front seat passenger buckle their seatbelts.
The seatbelt reminder switches off after
6 seconds if speed is below 10 km/h.
If the driver or front seat passenger have not
buckled their seatbelts, the reminder switches on again when the speed exceeds
10 km/h and switches off if the speed drops
below 5 km/h.
If the seatbelt is released, the function reactivates when speed exceeds 10 km/h.
The seatbelt reminder is intended for an adult
sitting in the front seat. If a belt-fitted child
seat is fitted in the front seat, the seatbelt reminder does not switch on.
01
Seatbelts and pregnancy
The seat belt should always be worn during
pregnancy. But it is crucial that it be worn in
the correct way. The diagonal section should
wrap over the shoulder then be routed between the breasts and to the side of the abdomen. The lap section should lay flat over
the thighs and as low as possible under the
abdomen. It must never be allowed to ride
upward. Remove all slack from the belt and
insure that it fits close to the body without
any twists.
As a pregnancy progresses, pregnant drivers
should adjust their seats and steering wheel
such that they can easily maintain control of
13
01 Safety
01
Seatbelts
the vehicle as they drive (which means they
must be able to easily operate the foot pedals and steering wheel). Within this context,
they should strive to position the seat with as
large a distance as possible between their
abdomen and the steering wheel.
Seatbelt tensioner
Label on seatbelts with seatbelt tensioner.
All the seatbelts (except the centre rear belt)
are equipped with belt tensioners. A mechanism in the belt tensioner tightens the belt
around the body in the event of a sufficiently
violent collision. This provides more effective
restraint for passengers.
14
01 Safety
Airbag system
Warning symbol in combined
instrument panel
01
As well as the warning symbol, a message may appear
on the information display in
appropriate cases. If the
warning symbol malfunctions, the warning triangle illuminates and the message
SRS AIRBAG SERVICE
URGENT appears in the information display. Contact an
authorised Volvo workshop urgently.
WARNING
The airbag system1 is continually monitored
by the system control module. The warning
symbol in the combined instrument panel illuminates when the ignition key is turned to
position I, II or III. The symbol goes out after
approx. seven seconds provided the airbag
system1 is fault-free.
1 Includes
If the warning symbol for the Airbag system
remains on or illuminates while driving, it
means that the Airbag system is not functioning fully. The symbol can indicate a fault
in the seatbelt tensioner system, SIPS, the
SRS system or the IC system. Contact an
authorised Volvo workshop immediately.
SRS and seatbelt tensioner, SIPS
and IC.
15
01 Safety
01
Airbags (SRS)
Airbag (SRS) on the driver’s side
Passenger airbag (SRS)
WARNING
To minimise the risk of injury if the airbag
deploys, passengers must sit as upright as
possible with their feet on the floor and
backs against the backrest. Seatbelts must
be secured.
WARNING
The car has an SRS airbag (Supplemental
Restraint System) in the steering wheel to
supplement the protection afforded by the
seatbelt. This airbag is fitted into the centre
of the steering wheel. The steering wheel is
marked SRS AIRBAG.
The car has an SRS airbag (Supplemental Restraint System) to supplement the protection
afforded by the seatbelt. The passenger airbag1 is fitted behind a panel above the glovebox. This panel is marked SRS AIRBAG.
WARNING
The seatbelts and airbags interact. If a seatbelt is not used or is used incorrectly, this
may diminish the protection provided by the
airbag in the event of a collision.
1
16
Not all cars have a passenger airbag (SRS).
This can be unselected when the car is
ordered.
Never place a child in a child seat or on a
booster cushion in the front seat if the airbag (SRS) is activated. For information on
activated/deactivated airbag (SRS) see
page 19.
Never allow a child to stand or sit in front of
the front passenger seat. No one shorter
than 140 cm should sit in the front passenger seat if the airbag (SRS) is activated.
Failure to follow the advice given above can
endanger the life of the child.
01 Safety
Airbags (SRS)
SRS system
01
WARNING
Repairs must only be performed by an authorised Volvo workshop.
Work on the SRS system can cause malfunction and result in serious personal
injury.
SRS system, left-hand drive.
The system consists of airbags and sensors.
A sufficiently violent collision trips the sensors and the airbag(s) are inflated with hot
gas. To cushion the impact, the airbag deflates when compressed. When this occurs,
smoke escapes into the car. This is completely normal. The entire process, including
inflation and deflation of the airbag, occurs
within tenths of a second.
SRS system, right-hand drive.
NOTE
The sensors react differently depending on
the course of the collision and whether the
seatbelts on the driver and passenger side
are used. It is therefore possible that only
one (or none) of the airbags may inflate in a
collision. The SRS system senses the force
of the collision on the car and adapts accordingly so that one or more airbags is deployed.
NOTE
The airbags have a function whereby their
capacities are adapted to the collision force
to which the car is subjected.
17
01 Safety
01
Airbags (SRS)
Location of the passenger airbag in left-hand
drive and right-hand drive cars
WARNING
Never interfere with SRS components in the
steering wheel or the panel above the
glovebox.
Objects and accessories must not be positioned or glued on or near the SRS AIRBAG panel (above the glovebox) or in the
area affected by a deployed airbag.
18
01 Safety
Activating/deactivating the airbag (SRS)
PACOS (option)
Activating/deactivating
01
WARNING
Activated airbag (passenger seat):
Never place a child in a child seat or on a
booster cushion in the front passenger seat
when the airbag is activated. This also applies to anyone shorter than 140 cm.
Deactivated airbag (passenger seat):
No one taller than 140 cm should ever sit in
the front passenger seat when the airbag is
deactivated.
Failure to follow the advice given above can
endanger life.
Indicator showing that the passenger airbag
(SRS) is deactivated.
Switch for PACOS (Passenger Airbag Cut Off
Switch).
The airbag (SRS) for the front passenger seat
can be deactivated using a switch. This is
necessary if a child seat is to be fitted there
for example.
The switch is located on the passenger end
of the dashboard and is accessible when the
passenger door is open. Check that the
switch is in the required position. Volvo recommends that that the ignition key is used to
change position. (Other items with a shape
similar to a key can be used).
Indicator
A text message on the roof panel indicates
that the passenger airbag (SRS) is
deactivated.
WARNING
If the car is equipped with a front passenger
airbag (SRS), but does not have PACOS,
the airbag will always be activated.
19
01 Safety
01
Activating/deactivating the airbag (SRS)
Switch position
Switch for SRS in ON position.
Switch for SRS in OFF position.
ON = Airbag (SRS) activated. With the switch
in this position, persons taller than 140 cm
can sit in the front passenger seat, but never
children in a child seat or on a booster
cushion.
OFF = Airbag (SRS) is deactivated. With the
switch in this position, children in a child seat
or on a booster cushion can sit in the front
passenger seat, but never persons taller
than 140 cm.
WARNING
Do not allow anyone to sit in the front passenger seat if the text message in the roof
panel indicates that the airbag (SRS) is deactivated and the airbag warning symbol is
displayed in the combined instrument panel. This indicates that there has been a severe malfunction. Visit an authorised Volvo
workshop urgently.
20
01 Safety
Side airbags (SIPS bags)
Side airbags – SIPS bag
01
WARNING
Do not put objects in the area between the
outside of the seat and the door panel,
since this area is required by the side airbag.
WARNING
Use only Volvo genuine car seat covers, or
seat covers approved by Volvo. Other seat
covers may impede the operation of the
side air bags.
Child seats and side airbags
Side airbag locations.
A large proportion of the collision force is
transferred by the SIPS (Side Impact Protection System) to beams, pillars, the floor, the
roof and other structural parts of the body.
The side airbags at the driver’s and front passenger seats protect the chest area and are
an important part of the SIPS. The side airbags are located in the front seat backrests.
Inflated side airbag.
WARNING
Side airbags are a supplement to the SIPS
system. Always wear a seatbelt.
The side airbag does not diminish the protection provided by the car to children seated in
a child seat or on a booster cushion.
A child seat or booster cushion can be
placed on the front passenger seat provided
that the car does not have an activated1 passenger airbag.
WARNING
Repairs must only be performed by an
authorised Volvo workshop.
Work on the SIPS system can cause malfunction and result in serious personal
injury.
1 For
information on activated/deactivated airbag (SRS) see page 19
21
01 Safety
01
Side airbags (SIPS bags)
SIPS bags
Driver’s side
The SIPS bag system consists of side airbags and sensors. A sufficiently violent collision trips the sensors and the side airbags
are inflated. The airbag inflates between the
occupant and the door panel and thereby
cushions the initial impact while deflating.
The side airbag is normally only deployed on
the side of the collision.
22
Passenger side
01 Safety
Inflatable Curtain (IC)
01
Properties
The inflatable curtain, IC (Inflatable Curtain),
is a supplement to the SIPS system. It is fitted in the headlining along both sides of the
roof and protects both front and rear seat
passengers. The inflatable curtain is activated by sensors in the event of a sufficiently violent collision and the inflatable curtain inflates. The inflatable curtain helps to prevent
the driver and passengers from striking their
heads on the inside of the car during a
collision.
WARNING
Never hang or fasten anything on the roof
handles. The hook is only intended for light
outer garments (not for hard objects such
as umbrellas).
Do not screw or fit anything to the headlining, door pillars or side panels. This could
compromise the intended protection. Only
use Volvo genuine parts that are approved
for placement in these areas.
WARNING
Do not load the car higher than 50 mm
under the top edge of the rear passenger
windows. Otherwise, the intended protection of the inflatable curtain, which is hidden
in the headlining, may be compromised.
WARNING
The inflatable curtain is a supplement to the
seatbelts. Always wear your seatbelt.
23
01 Safety
01
WHIPS
Protection against whiplash injury – WHIPS
The whiplash protection system (WHIPS)
consists of energy absorbing backrests and
specially designed head restraints for the
front seats. The system is actuated by a rearend collision, where the angle and speed of
the collision, and the nature of the colliding
vehicle all have an influence.
Properties of the seat
When the WHIPS system is deployed, the
front seat backrests fall backward to alter the
position of the driver and front seat passenger. This diminishes the risk of whiplash
injury.
WARNING
WARNING
The WHIPS system is a supplement to the
seatbelts. Always wear your seatbelt.
24
Never modify or repair the seat or WHIPS
system yourself. Contact an authorised
Volvo workshop.
WHIPS system and child seats/
booster cushions
The WHIPS system does not diminish the
protection provided by the car to children
seated in a child seat or on a booster
cushion.
Correct seating position
For the best possible protection, the driver
and front seat passenger should sit in the
centre of the seat with as little space as possible between the head and the head
restraint.
01 Safety
WHIPS
Do not obstruct the WHIPS system
01
WARNING
If a seat has been subjected to extreme
forces, such as due to a rear-end collision,
the WHIPS system must be checked by an
authorised Volvo workshop.
Part of the WHIPS system’s protective capacity may have been lost even if the seat
appears to be undamaged.
Contact an authorised Volvo workshop to
have the system checked even after a minor
rear-end collision.
WARNING
Do not squeeze rigid objects between the
rear seat cushion and the front seat backrest. Make sure you do not to obstruct the
function of the WHIPS system.
WARNING
If a rear seat backrest is folded down, the
corresponding front seat must be moved
forward so that it does not touch the folded
backrest.
25
01 Safety
01
When the systems deploy
System
Triggered
Seatbelt tensioner
In a frontal collision and/or side-impact accident and/or overturning.
Airbags SRS
In a frontal collision1
Side airbags SIPS
In a side-impact accident1
Inflatable Curtain IC
In a side-impact accident1
Whiplash protection WHIPS
In a rear-end collision
1
The bodywork of the car could be greatly deformed in a collision without airbag deployment. A number of factors such as the rigidity and weight of the object hit, the
speed of the car, the angle of the collision etc. affects how the different safety systems of the car are activated.
If the airbags have been deployed, the following is recommended:
• Have the car transported to an authorised
Volvo workshop. Do not drive with deployed airbags.
• Have an authorised Volvo workshop replace components in the car’s safety system.
• Always contact a doctor.
NOTE
The SRS, SIPS, IC and belt tensioner systems are deployed only once during a collision
26
WARNING
The airbag control module is located in the
centre console. If the centre console is
drenched with water or other liquid, disconnect the battery cables. Do not attempt to
start the car since the airbags may deploy.
Have the car transported to an authorised
Volvo workshop.
WARNING
Never drive with deployed airbags. They
can make steering difficult. Other safety
systems may also be damaged. The smoke
and dust created when the airbags are deployed can cause skin and eye irritation
after intensive exposure. In case of irritation, wash with cold water. The rapid deployment sequence and airbag fabric may
cause friction injury and burns to the skin.
01 Safety
Child safety
Children should sit comfortably and
safely
01
Child seats and airbags
The position of a child in the car and the
choice of equipment is dictated by the child’s
weight and size, for more information see
page 29.
NOTE
Regulations regarding the placement of
children in cars vary from country to country. Check what laws apply.
Children of all ages and sizes must always sit
correctly secured in the car. Never allow a
child to sit on the knee of a passenger.
Volvo’s own child safety equipment is designed for your car. Use Volvo genuine
equipment to best ensure that the mounting
points and attachments are correctly positioned and are sufficiently strong.
You may place:
• a child seat or booster cushion on the
front passenger seat, provided the passenger airbag is not activated1.
• a rear-facing child seat in the rear seat that
uses the back of the front seat as support.
Child seats and airbags are not compatible.
Location of airbag decal in door opening on front
passenger side.
Always place a child in the rear seat if the
passenger airbag is activated1. A child in a
child seat on the front passenger seat may
suffer serious injury if the airbag deploys.
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the airbag (SRS) is activated1. Failure to follow
this advice can endanger the life of the
child.
WARNING
Persons shorter than 140 cm may only sit in
the front passenger seat if the passenger
airbag is deactivated.
1
For information on activated/deactivated airbag (SRS) see page 19.
1 For
information on activated/deactivated airbag (SRS) see page 19.
27
01 Safety
01
Child safety
Decal located on dashboard end face.
28
Decal located on instrument panel end face
(Australia only).
01 Safety
Child safety
01
Placement of children in the car
Weight/age
Front seat1
Outer rear seat
Centre rear seat
<10 kg
(0–9 months)
Alternatives:
• Rear-facing child seat, secured
with seatbelt.
L 2: Type approval no. E5 03160
Alternatives:
• Rear-facing child seat, secured
with seatbelt and support legs.
L: Type approval no. E5 03160
Rear-facing child seat, secured with
seatbelt, support legs and straps.
L: Type approval no. E5 03135
• Rear-facing child seat, secured
with Isofix mounting.
L: Type approval no. E5 03162
• Rear-facing child seat, secured
with seatbelt and straps.
L: Type approval no. E5 03135
• Rear-facing child seat, secured
with Isofix mounting and support
legs.
L: Type approval no. E5 03162
• Rear-facing child seat, secured
with seatbelt, support legs and
straps.
L: Type approval no. E5 03135
Alternatives:
• Rear-facing child seat, secured
with seatbelt and support legs.
L: Type approval no. E5 03161
• Rear-facing child seat, secured
with Isofix mounting and support
legs.
L: Type approval no. E5 03163
• Rear-facing child seat, secured
with seatbelt, support legs and
straps.
L: Type approval no. E5 03135
9–18 kg
(9–36 months)
Alternatives:
• Rear-facing child seat, secured
with seatbelt.
L: Type approval no. E5 03161
• Rear-facing child seat, secured
with Isofix mounting.
L: Type approval no. E5 03163
• Rear-facing child seat, secured
with seatbelt and straps.
L: Type approval no. E5 03135
Rear-facing child seat, secured with
seatbelt, support legs and straps.
L: Type approval no. E5 03135
29
01 Safety
01
Child safety
Weight/age
Front seat1
Outer rear seat
Centre rear seat
15–36 kg
(3–12 years)
Booster cushion with or without
backrest.
L: Type approval no. E5 03139
Booster cushion with or without
backrest.
L: Type approval no. E5 03139
Alternatives:
• Booster cushion with or without
backrest.
L: Type approval no. E5 03139
• Integrated booster cushion3.
B4: Type approval no. E5 03140
1
For information on activated/deactivated airbag (SRS) see page 16.
2L:
30
Suitable for certain child seats as listed in the specified type approval. Child seats can be vehicle-specific, limited, semi-universal or universal.
3
Option
4
B: Integrated and approved for this age group
01 Safety
Child safety
Integrated booster cushions (option)
WARNING
01
Folding out the booster cushion
Never place a child in a child seat or on a
booster cushion in the front seat if the airbag (SRS) is activated.
No one shorter than 140 cm should sit in
the front passenger seat if the airbag (SRS)
is activated.1
Failure to follow the advice given above can
endanger the life of the child.
1For information on activated/deactivated airbag
(SRS) see page 16.
Volvo’s integrated booster cushions for the
outer rear seats are specially designed to
provide optimum safety for children. Combined with the regular seatbelts, the booster
cushions are approved for children weighing
between 15 and 36 kg.
– fold down the booster cushion.
– pull apart the Velcro.
– raise the upper portion back into place.
Check that:
• the seatbelt is in contact with the child’s
body and is not slack or twisted.
• the belt lies correctly over the shoulder.
• the lap belt is low over the pelvis for
optimum protection.
• the belt does not touch the child’s throat
or lie below the shoulder.
• Carefully adjust the position of the head
restraint to suit the child.
31
01 Safety
01
Child safety
Folding in the booster cushion
WARNING
Repair or replacement should only be performed by an authorised Volvo workshop.
Do not make any modifications or additions
to the booster cushion.
If an integrated booster cushion has been
subjected to a major load, such as in conjunction with a collision, the entire booster
cushion must be replaced. Even if the
booster cushion appears to be undamaged,
it may not afford the same level of protection. The booster cushion must also be replaced if it is heavily worn.
– Fold down the upper section (A).
– Fasten the Velcro (B).
– Raise the booster cushion into the rear
seat backrest (C).
NOTE
Make sure that both sections of the booster
cushion are secured with the Velcro
strap (B) before folding down. Otherwise
the upper section (A) could become trapped
in the rear seat backrest (C) when the
booster cushion is folded out again.
32
01 Safety
Child safety
Fitting a child seat
ISOFIX fixture system for child seats
(option)
Volvo has child safety products that are designed for and tested by Volvo.
WARNING
Booster cushions/child seats with steel
braces or some other design that could rest
on the seatbelt buckle’s opening button
must not be used, as they could cause the
seatbelt buckle to open accidentally.
Do not allow the upper section of the child
seat to rest against the windscreen.
01
WARNING
Never place the child seat in the front seat if
the car is equipped with an activated1 front
passenger airbag. If problems arise when
fitting child safety products, contact the
manufacturer for clearer instructions.
1
For information on activated/deactivated airbag
(SRS) see page 19.
When using other products that are available
on the market, it is important to read the fitting instructions included with the product.
• Do not attach the straps for the child seat
to the horizontal adjustment bar, springs,
rails or beams under the seat. Sharp
edges can damage the straps.
• Allow the back of the child seat to rest
against the dashboard. This applies to
cars without a passenger airbag, or where
the airbag is deactivated.
The outer rear seats have ISOFIX attachment
points for child seats. Contact a Volvo dealer
for further information on child safety
equipment.
33
Overview, left-hand drive car ...................................................................36
Overview, right-hand drive car .................................................................38
Combined instrument panel .....................................................................40
Indicator and warning symbols ................................................................41
Information display ...................................................................................44
Switches in the centre console ................................................................45
Lighting panel ...........................................................................................49
Left-hand stalk switch ..............................................................................51
Trip computer ...........................................................................................52
Right-hand stalk switch ...........................................................................53
Cruise control (option) ..............................................................................55
Steering wheel adjustment, parking brake ...............................................56
Electrical socket, cigarette lighter ............................................................57
Power windows ........................................................................................58
Rearview and door mirrors .......................................................................61
Power sunroof (option) .............................................................................65
34
INSTRUMENTS AND CONTROLS
02
02 Instruments and controls
Overview, left-hand drive car
02
36
02 Instruments and controls
Overview, left-hand drive car
1. Fog lamps
2. Headlamps, position/parking lights
3. Rear fog lamp
4. Direction indicators, beam selection
5. Cruise control
6. Horn
7. Combined instrument panel
8. Keypad for phone/audio
9. Windscreen wipers
10. Parking brake (handbrake)
11. Switch panel
12. Climate control
13. Audio system
14. Electric socket, Cigarette lighter
15. Hazard warning flashers
16. Glovebox
17. Panel vents
18. Display
19. Temperature gauge
20. Odometer, trip meter/cruise control
21. Speedometer
22. Direction indicators
23. Tachometer
24. Outside temperature, clock, gear
position
25. Fuel gauge
26. Indicator and warning symbols
27. Panel vents
28. Instrument lighting
29. Headlamp levelling
30. Lighting panel
31. Reading lamps
32. Interior lighting
33. Control, sunroof
34. Seatbelt reminder
35. Rearview mirror
36. Lock button, for all doors
37. Blocking power windows in the rear
doors
38. Controls, power windows
39. Controls, power door mirrors
40. Active chassis-Four C (S60 R)
02
37
02 Instruments and controls
Overview, right-hand drive car
02
38
02 Instruments and controls
Overview, right-hand drive car
Driver’s door control panel
1. Rear fog lamp
2. Headlamps, position/parking lights
3. Fog lamps
4. Windscreen wipers
5. Keypad for phone/audio
6. Horn
7. Combined instrument panel
8. Cruise control
9. Direction indicators, beam selection
10. Parking brake (handbrake)
11. Electric socket, Cigarette lighter
12. Climate control
13. Audio system
14. Switch panel
15. Hazard warning flashers
16. Glovebox
17. Panel vents
18. Indicator and warning symbols
19. Fuel gauge
20. Outside temperature, clock, gear
position
21. Tachometer
22. Direction indicators
23. Speedometer
24. Odometer, trip meter/cruise control
25. Temperature gauge
26. Display
27. Panel vents
28. Lighting panel
29. Headlamp levelling
30. Instrument lighting
31. Reading lamps
32. Interior lighting
33. Control, sunroof
34. Seatbelt reminder
35. Rearview mirror
36. Lock button, for all doors
37. Blocking power windows in the rear
doors
38. Controls, power windows
39. Controls, power door mirrors
40. Active chassis-Four C (S60 R)
02
39
02 Instruments and controls
Combined instrument panel
02
1. Temperature gauge
Displays the temperature of the engine cooling system. If the temperature is abnormally
high and the needle enters the red zone, a
message is shown in the display. Bear in
mind that extra lamps in front of the radiator
grille reduce the cooling capacity at high outside temperature and high engine loads.
2. Display
Information and warning messages are
shown in the display.
3. Speedometer
Shows the speed of the car.
40
4. Trip meter, T1 and T2
The trip meters are used for measuring short
distances. The right-hand digit displays
tenths of a kilometre. Press the button for
more than 2 seconds to reset. Switch between trip meters with one quick press of the
button.
5. Cruise control indicator
See page 55.
6. Trip meter
The odometer indicates the total distance the
car has travelled.
7. Main beam on/off
8. Warning symbol
If a fault arises, the symbol lights up and a
message is shown in the display.
9. Tachometer
Indicates engine speed in thousands of revolutions per minute (RPM). Do not allow the
needle of the tachometer to enter the red
field.
10. Automatic gearbox indicator
The selected gearshift programme is displayed here. If you have Geartronic
02 Instruments and controls
Indicator and warning symbols
automatic gearbox and drive using the manual function, the current manual gear is displayed.
11. Outside temperature gauge
Displays outside temperature. When the temperature lies between +2 °C to –5 °C, a
snowflake symbol is shown in the display.
This symbol serves as a warning for slippery
road surfaces. When the car is or was stationary, the outside temperature gauge may
display a higher reading than the actual temperature.
Indicator and warning symbols
All indicator and warning symbols1 illuminate
when the ignition key is turned to position II
before starting. This is to check that the symbols are working. When the engine starts, all
the symbols should go out except the handbrake symbol, which extinguishes when the
handbrake is released.
If the engine does not start within
five seconds, all symbols extinguish except the symbols for a
fault in the car’s emissions system and for low oil pressure. Certain symbols may have no function, depending on the car’s
specifications.
12. Clock
Turn the button to set the clock.
13. Fuel gauge
When the lamp in the instrument panel lights,
approximately 8 litres of usable fuel remain in
the tank.
14. Indicator and warning symbols
15. Direction indicators – left/right.
1
For certain engine variants, the symbol for low
oil pressure is not used. Warnings are given
via display text, see page 180.
Warning symbols in the centre of the
instrument panel
02
These symbols are lit with a red
or amber glow depending on the
severity of the fault.
Red symbol:
– Stop the car in a safe place. Do not drive
the car further.
– Read the information on the information
display.
– Rectify the fault as instructed or contact
an authorised Volvo workshop.
Symbol and message text are visible until the
fault has been rectified.
41
02 Instruments and controls
Indicator and warning symbols
02
Yellow symbol:
– Read the message on the display.
– Action.
The message text is cleared using the READ
button, see page 44, or disappears automatically after 2 minutes.
When the message text
TIME FOR REGULAR SERVICE is shown,
the symbol lamp and message text are
cleared using the READ button, or disappear
automatically after 2 minutes.
Fault in brake system
level.
If the reservoir level is below MIN, the car
should not be driven further. Have it towed to
an authorised Volvo workshop to have the
brake system checked.
If the warning symbols for
BRAKE and ABS illuminate at the
same time, there may be a fault in
the brake force distribution system.
If this symbol illuminates, the
system is not working. The car’s
regular brake system continues
to work, but without the ABS
function.
42
If the warning symbols for BRAKE and ABS
illuminate at the same time, there is a risk
that the rear end will have a tendency to
slide during heavy braking.
– Stop the car in a safe place and
check the brake fluid reservoir
ABS fault
– Stop the car in a safe place and turn off
the engine.
– Restart the engine.
• If the warning symbol goes out, continue
driving. It was an indicator error.
• If the warning symbol remains illuminated,
drive to an authorised Volvo workshop to
have the ABS system checked.
WARNING
If this symbol lights, the brake
fluid level may be too low.
•
•
•
•
– Stop the car in a safe place and
switch off the engine. Restart the
engine.
If both symbols go out, it was an indicator
error.
If the warning symbols remain lit, check
the brake fluid reservoir level.
If the reservoir level is below MIN, the car
should not be driven further. Have it towed
to an authorised Volvo workshop to have
the brake system checked.
If the brake fluid level is normal and the
lamps remain illuminated, drive the car
carefully to the nearest authorised Volvo
workshop to have the brake system
checked.
Seatbelt reminder
This lamp lights until the driver
buckles up.
Low oil pressure1
If the lamp illuminates while driving, engine oil pressure is too
low. Stop the engine immediately
and check the oil level. If the
lamp illuminates but the oil level
is normal, stop the car and contact an authorised Volvo workshop.
Fault in car’s emissions system
Drive to an authorised Volvo
workshop to have the system
checked.
1
For certain engine variants, the symbol for low
oil pressure is not used. Warnings are given
via display text, see page 180.
02 Instruments and controls
Indicator and warning symbols
Fault in SRS
If a fault in the SRS system is detected the warning symbol will
remain lit or light up while driving.
Drive to an authorised Volvo
workshop to have the system
checked.
Alternator not charging
If this lamp illuminates while driving, there is probably a fault in
the electrical system. Contact an
authorised Volvo workshop.
Engine preheater (diesel)
This lamp indicates engine preheating. You can start the car
when the lamp switches off. Applies to diesel cars only.
Rear fog lamp
This symbol is lit when the rear
fog lamp is on.
Trailer indicator lamp
02
Flashes when the direction indicators of the car and trailer are
used. If the lamp does not flash,
one of the direction indicator
lamps on the trailer or car is defective.
Stability systems STC/DSTC
The system’s different functions
and symbols are described on
page 126.
Parking brake applied
The lamp illuminates when the
parking brake is applied. Always
pull the parking brake lever to the
end position.
NOTE
The lamp illuminates irrespective of how
hard the parking brake is applied.
43
02 Instruments and controls
Information display
Messages in the display
02
A message appears in the display whenever
a warning or indicator symbol illuminates.
Once you have read and understood the
message, press the READ button (A). Read
messages are then erased from the display
and stored in a memory. Messages regarding
faults remain in the memory until the fault has
been remedied.
Very serious fault messages cannot be
erased from the display. They remain in the
display until the fault is remedied.
sages stored in the memory by pressing the
READ button.
Press the READ button to return read messages to the memory.
NOTE
If a warning message interrupts when you
are in the trip computer menu or wish to use
the phone, you must first acknowledge the
message by pressing the READ button (A).
Messages stored in the memory can be read
again. Press the READ button (A) to see
stored messages. Scroll through the mes-
Message
Specification
STOP SAFELY
STOP ENGINE
SERVICE URGENT
SEE MANUAL
SERVICE REQUIRED
FIX NEXT SERVICE
TIME FOR REGULAR SERVICE
Stop the car in a safe manner and turn off the engine. Serious risk of damage.
Stop the car in a safe manner and turn off the engine. Serious risk of damage.
Have the car checked by an authorised Volvo workshop immediately.
Read the owner’s manual.
Have the car checked by an authorised Volvo workshop as soon as possible.
Have your car checked at the next service interval.
Time for regular service at an authorised Volvo workshop. The timing is determined by the number of
kilometres driven, number of months since the last service and engine running time.
Diesel particle filter requires regeneration, see page 115.
The function of the stability and traction control system is reduced, see page 125 for more variants.
SOOT FILTER FULL – SEE MANUAL
STC/DSTC SPIN CONTROL OFF
44
02 Instruments and controls
Switches in the centre console
02
BLIS (Blind Spot Information System) –
option
NOTE
Press the button to deactivate or reactivate the function. For further information,
see page 151.
The order of the buttons may vary.
Active chassis, FOUR-C (option)
Press the button to select
chassis setting Comfort or
Sport, see page 127. The
information display shows
the current setting for
10 seconds.
Hold the button depressed for at least half a
second to reduce the function of the DSTC
system.
The LED in the button goes out and the text
DSTC ANTI-SKID OFF is shown in the display.
The DSTC system is reactivated when the
engine is restarted. For more information,
see page 126.
DSTC system1
This button is used to reduce or reactivate the functions of the DSTC system.
When the LED in the button
is lit, the DSTC system is
activated (assuming there is
WARNING
Keep in mind that car’s driving characteristics may change if you deactivate the DSTC
system.
no fault).
1
Option in certain markets. Only button in
S60 R, others in trip computer.
45
02 Instruments and controls
Switches in the centre console
Electric socket/Cigarette lighter
(option)
02
The electric socket can be
used for various 12 V accessories, e. g. mobile
phone or a cooler box.
The ignition key must be at
least in position I so that the
socket can supply power.
The cigarette lighter is activated by pressing
in the button. Once the lighter has been heated, the button pops out again. Pull out the
lighter to use it. For safety reasons, always
keep the cover in place when the socket is
not in use. Maximum current tap 10 A.
Lowering the outer head restraints in
the rear seat (option)
Do not lower the head restraints if there is a passenger in one of the outer
seats.
–Turn the ignition key to
position I or II.
– Press the button to tilt the rear head
restraints forward for a better rear view.
The head restraints are moved back manually.
The head restraints must be in their upright
positions if the rear backrests are to be folded down.
Locking the boot lid (certain countries)
Press this button in order to
lock the boot lid. The boot
lid remains locked even if
the doors are unlocked
manually with the master
key, the master key remote
control or the service key.
Retractable power door mirrors
(option)
This button is used to fold
in the door mirrors if they
are folded out or to fold
them out if they are folded
in.
Deactivation of the deadlocks and
detectors
– Manually fold the door mirror forward as
far as possible.
– Turn the ignition key to position II.
– Fold the door mirror inward and then
outward using the button.
The door mirrors have now returned to their
original fixed positions.
Use this button if you wish
to switch off the deadlock
function (doors cannot be
opened from the inside
when locked). This button
can also be used when deactivating the alarm system
movement and tilt detectors1 – e.g. when
transporting the car by ferry. The LED illuminates when the functions are deactivated.
Parking assistance (option)
Auxiliary lamps (accessory)
Proceed as follows if a door
mirror has been accidentally folded in or out:
The system is always activated when the car is started. Press the button to deactivate/reactivate parking
assistance. See also
page 128.
Use this button if you want
the auxiliary lamps of the
car to light together with the
main beam or to deactivate
this function. The LED in the
button is lit when the function is active.
1
46
Option
02 Instruments and controls
Switches in the centre console
Active Bi-Xenon Lights, ABL (option)
Active chassis, FOUR-C (S60 R)
Hazard warning flashers
The ABL headlamps’ headlamp pattern follows the
movements of the steering
wheel during driving. The
function is activated automatically when the car is
started and can be deactivated/activated by pressing the button. The
LED in the button illuminates when the function is activated.
Shifting headlamp pattern for right/lefthand traffic
Hold the button depressed for at least five
seconds. The car must be stationary when
the headlamp pattern is shifted.
The message DIPPED BEAM
SETT. F. RIGHT TRAFFIC or DIPPED BEAM
SETT. F. LEFT TRAFFIC is shown in the display. For more information and adapting
headlamp pattern for halogen or Bi-Xenon
headlamps, see page 144.
02
Press one of the buttons to select Comfort,
Sport or Advanced mode. For further information, see page 127.
Use the hazard warning flashers (all direction
indicators flash) when the car is stopped
where it could be a traffic hazard or obstruction. Press the button to activate the function.
NOTE
Regulations regarding the use of hazard
warning flashers vary from country to
country.
47
02 Instruments and controls
Switches in the centre console
Door mirror and rear window
defrosters
02
Heating is used to
quickly remove misting and ice from the
rear window and door
mirrors.
Press the switch to
start defrosting the
rear window and door
mirrors. The LED in the
switch illuminates.
Defrosting is automatically disconnected after about 12 minutes.
48
Heated front seats
See page 72 or
page 75 for further information.
02 Instruments and controls
Lighting panel
Headlamps
dipped beam can be deactivated by an authorised Volvo workshop.
Automatic dipped beam, main beam
– Turn the ignition key to position II.
– Dipped beam is activated by means of
turning the headlamp control (1) clockwise
to the end position.
– Main beam is activated by means of moving the left-hand stalk switch towards the
steering wheel to the end position and
releasing it, see page 51.
The lamps are switched off automatically
when the ignition key is turned to position I
or 0.
Position Specification
Automatic/deactivated dipped
beam. Only main beam flash.
Position/parking lamps
Automatic dipped beam. Main
beam and main beam flash
work in this position.
Automatic dipped beam (certain
countries)
Dipped beam comes on automatically when
the ignition key is turned to position II, except when the headlamp control (1) is in the
centre position. If necessary the automatic
Position/parking lamps
Position/parking lamps can be switched on
irrespective of ignition key position.
– Turn the ignition key to position II.
– Turn the headlamp control (1) to one of the
end positions.
– Roll the control (3) up or down respectively to raise or lower beam alignment.
Cars with Active Bi-Xenon and Bi-Xenon
headlamps1 have automatic headlamp levelling, so there is no control (3).
02
Instrument lighting
The instrument lighting is switched on when
the ignition key is in position II and the headlamp control (1) is in one of the end positions.
The lighting is automatically dimmed during
the day and can be controlled manually at
night.
– Roll the control up or down (5) for brighter
or dimmer lighting.
– Turn the headlamp control (1) to the centre
position.
When the ignition key is in position II the position/parking lamps and number plate lighting are always on.
Headlamp levelling
The load in the car changes the vertical alignment of the headlamp beam, which could
dazzle oncoming motorists. Avoid this by adjusting the height of the beam.
1
Option.
49
02 Instruments and controls
Lighting panel
Fog lamp
Active Bi-Xenon Lights, ABL (option)
NOTE
Regulations for use of fog lamps vary from
country to country.
02
2 – Front fog lamps (option)
The front fog lamps can be switched on
along with the headlamps or the position
lamps/parking lamps.
– Press the button (2).
The light in the button (2) illuminates when
the front fog lamps are switched on.
4 – Rear fog lamp
The rear fog lamp can only be switched on
with the headlamps or the front fog lamps.
– Press the button (4).
The rear fog lamp indicator symbol on the
combined instrument panel and the light in
the button (4) illuminate when the rear fog
lamp is switched on.
50
The ABL headlamps’ headlamp pattern follows the movements of the steering wheel
during driving. The function is activated automatically when the car is started and can be
deactivated/activated using the button in the
centre console, see page 47.
02 Instruments and controls
Left-hand stalk switch
Stalk switch positions
Direction indicators
Continuous flash sequence
– Move the stalk switch up or down to end
position (2).
The stalk switch remains in its end position
and is moved back manually, or automatically by steering wheel movement.
1. Short flash sequence, direction indicators
2. Continuous flash sequence, direction
indicators
3. Main beam flash
4. Switching, main and dipped beam, and
home safe lighting
Short flash sequence
– Move the stalk switch up or down to
position (1) and release, the stalk switch
then returns to its home position, or move
the stalk switch to position (2) and move it
directly back to the home position.
The direction indicators flash three times.
Main beam flash
– Move the stalk switch gently towards the
steering wheel to position (3).
Main beam comes on until the stalk switch is
released.
Home safe lighting
02
Some exterior lights can be kept lit and serve
as home safe lighting after the car has been
locked. The standard delay is 30 seconds1,
but can be changed to 60 or 90 seconds.
– Remove the key from the ignition switch.
– Move the stalk switch towards the steering wheel to the end position (4) and release.
– Get out of the car and lock the door.
Short flash sequence interrupted immediately if indicating is started in the opposite direction.
Switching, main and dipped beam
The ignition key must be in position II for
main beam to be switched on.
– Turn the headlamp control clockwise to
the end position, see page 49.
– Move the stalk switch towards the steering wheel to the end position (4) and release.
1
Factory settings.
51
02 Instruments and controls
Trip computer
Trip computer (option)
02
SPEED IN MILES PER HOUR1
INSTANTANEOUS
AVERAGE
KILOMETRES TO EMPTY TANK
STC/DSTC, see page 126
Average speed
The average speed since the last reset
(RESET). When the ignition is switched off,
the average speed is stored and used as the
basis of the new value when you continue
driving. This can be reset with the RESET
button (C) on the stalk switch.
Controls
To scroll through trip computer information,
turn the thumbwheel (B) in steps, either upward or downward. Continue turning to return to the starting point.
NOTE
If a warning message interrupts while you
are using the trip computer, this message
must be acknowledged. Acknowledge by
pressing the READ button (A) and revert to
the trip computer function.
Functions
The trip computer displays the following information:
• AVERAGE SPEED
52
•
•
•
•
•
Speed in miles per hour1
Current speed is displayed in mph.
Instantaneous
Continuous information on current fuel consumption, calculated each second. The figure in the display is updated every couple of
seconds. When the car is stationary, "----" is
shown in the display.
NOTE
There may be a slight error in the reading if
a fuel-driven heater is used.
1 Certain
countries.
Average
The average fuel consumption since the last
reset (RESET). The average fuel consumption is stored when the ignition is switched
off and remains until the function is reset. Reset using the RESET button (C).
NOTE
There may be a slight error in the reading if
a fuel-driven heater is used.
Kilometres to empty tank
The range to empty is calculated based on
the average fuel consumption over the last
30 km. When the range to empty is shorter
than 20 km then "----" is shown in the
display.
NOTE
There may be a slight error in the reading if
fuel consumption is changed due to a
change in driving style or if a fuel-driven
heater is used for example.
02 Instruments and controls
Right-hand stalk switch
Windscreen wipers
ring (1) anticlockwise to decrease wiper
stroke frequency.
Continuous wiping
The wipers sweep at normal
speed.
The wipers sweep at high speed.
screen wiper stalk switch must be in
position 0.
To activate the rain sensor:
press the button (2). An LED in the button illuminates to indicate that the rain sensor is
active.
02
To turn the rain sensor off, either:
press the button (2) or
IMPORTANT
Use plenty of washer fluid when the wipers
are cleaning the windscreen. The windscreen must be wet when the windscreen
wipers are operating.
Windscreen wipers off
The windscreen wipers are off
when the stalk switch is in
position 0.
Single sweep
Raise the stalk switch to make a
single sweep.
Intermittent wiping
You can adjust and set a suitable
speed for intermittent wiping.
Rotate the ring clockwise to increase wiper stroke frequency. Rotate the
Rain sensor (option)
The rain sensor automatically activates the
windscreen wipers based on how much water it detects on the windscreen. The sensitivity of the rain sensor can be adjusted using
the ring (1).
Turn the ring clockwise to increase sensitivity
or anticlockwise to decrease sensitivity,
(there is an extra swipe when the ring is
turned clockwise.)
On/Off
When activating the rain sensor, the ignition
key must be in position I or II and the wind-
press the stalk switch downward to another
wiper programme.
If the stalk switch is raised, the
rain sensor will remain active, the
wipers make an extra sweep and
then return to rain sensor mode when the
stalk is released to position 0.
The rain sensor is automatically deactivated
when the key is removed from the ignition
switch or five minutes after the ignition is
switched off.
IMPORTANT
In an automatic car wash <:
Turn off the rain sensor by pressing the button (2) while the ignition key is in position I
or II. Otherwise, the windscreen wipers may
start and be damaged.
53
02 Instruments and controls
Right-hand stalk switch
Windscreen washer
Reduced washing
Pull the lever towards the steering wheel to
activate the windscreen washer.
If only approx. one litre of washer fluid remains in the reservoir, the supply to the
headlamps is cut off in order to prioritise
cleaning of the windscreen.
Headlamp washers (option certain
markets)
02
Use of the windscreen washer automatically
activates the headlamp washer.
High-pressure headlamp washing consumes
a large quantity of washer fluid. To save fluid,
the headlamps are only washed every fifth
wash cycle (within a ten minute period).
When ten minutes have elapsed following the
latest windscreen washing, the headlamps
are again washed with high-pressure with the
first windscreen washing. Turn the stalk
switch toward the steering wheel to wash the
windscreen only.
54
Windscreen washer and headlamp
washer (S60 R)
Pull the lever toward the steering wheel to
start the windscreen and headlamp washers.
02 Instruments and controls
Cruise control (option)
Activating
Increasing or decreasing speed
Temporary disengagement
Press 0 to disengage the cruise control temporarily. CRUISE will be shown on the combined instrument panel. The speed set earlier
is stored in the memory.
The cruise control is also temporarily disengaged when:
The controls for cruise control are to the left
of the steering wheel.
– Setting the desired speed:
– Press the CRUISE button. CRUISE is
shown on the combined instrument panel.
– Touch + or — to lock the vehicle speed.
CRUISE-ON appears on the combined instrument panel.
Cruise control cannot be engaged at speeds
below 30 km/h or above 200 km/h.
– Increase or decrease the speed by pressing and holding + or —. The speed of the
car when the button is released is set as
the new speed.
A brief press (less than half a second)
on + or — changes the speed by 1 km/h.
NOTE
A temporary increase in speed (less than
one minute) using the accelerator, such as
while overtaking, does not affect the cruise
control setting. When you release the accelerator, the car will return to the programmed speed.
02
• the brake pedal or clutch pedal is depressed
• speed falls below 25–30 km/h when travelling uphill1
• the gear selector is moved to position N
• wheel spin or wheel lock-up occurs
• a temporary increase in speed lasts longer
than one minute.
Return to the set speed
Press this button to resume the
previously set speed.
CRUISE-ON appears on the
combined instrument panel.
Disengaging
Press CRUISE to disengage the cruise control. CRUISE-ON goes out on the combined
instrument panel.
1
Depending on engine type
55
02 Instruments and controls
Steering wheel adjustment, parking brake
Steering wheel adjustment
Parking brake (handbrake)
– If the vehicle rolls, the parking brake lever
must be pulled more firmly.
– When parking a vehicle always put the
gear selector in position 1 (for manual
transmission) or P (for automatic transmission).
02
Parking on a hill
If the car is parked facing uphill; turn the
wheels away from the kerb.
If the car is parked facing downhill, turn the
wheels towards the kerb.
The steering wheel can be adjusted for both
height and reach.
– Press down the control on the left-hand
side of the steering column.
– Then adjust the steering wheel to the
position that suits you best.
– Press the control back into place to lock
the steering wheel. If this is difficult, press
the steering wheel slightly while pressing
the control back.
WARNING
Adjust the steering wheel before driving off,
never while driving. Before driving, check
that the steering wheel is fixed in position.
56
The lever is located between the front seats.
NOTE
The warning lamp symbol in the combined
instrument panel comes on irrespective of
how hard the parking brake is applied.
How to apply the parking brake
– Press the foot brake down firmly.
– Pull up the parking brake lever up firmly to
its full extent.
– Release the foot brake and make sure that
the car is stationary.
How to release the parking brake
– Press the foot brake down firmly.
– Pull the parking brake lever up slightly,
press the button, release the parking
brake lever and release the button.
02 Instruments and controls
Electrical socket, cigarette lighter
Electrical socket in rear seat
Cigarette lighter (option)
– Press in the lighter to activate it.
The button pops out when the lighter is hot.
Pull out the lighter and light a cigarette on the
heated coils.
02
The electrical socket can be used for accessories, such as a mobile phone charger or a
cooler, and it is designed for 12 V. The maximum current is 10 A.
The ignition key must be at least in position I
for the socket to supply power.
WARNING
For reasons of safety, always keep the
cover in place when the socket is not in use.
57
02 Instruments and controls
Power windows
Operating
02
Driver’s door
The power windows are operated using the
controls in the doors. The ignition key must
be in position I and II for the power windows
to operate. The windows continue to work
when the car is stopped and ignition key removed, provided none of the doors is
opened. Operate the windows with caution.
WARNING
The function that interrupts the movement
of the windows in the event of blocking
works only with automatic closing, not with
manual.
To open a window:
– Depress the front of the control.
WARNING
To close a window:
– Raise the front of the control.
WARNING
Make sure that children and other passengers cannot be trapped in any way when
closing the windows. Pay close attention if
the rear door windows are controlled from
the driver’s door or if the windows are
closed with the remote control.
Controls, power windows. A. Front B. Rear.
The driver can operate all power windows
from the driver’s seat.
The windows can be opened and closed in
two ways:
Manual operation
– Depress one of the controls (A) or (B) gently or raise it gently. The power window
opens or closes as long as the switch is
actuated.
Automatic operation
– Fully depress one of the controls (A) or (B)
or raise it fully, then release. The side
58
window will then open or close automatically. If the window is obstructed by an
object, the movement will stop.
If there are children in the car:
Remember to switch off the supply to the
power windows by removing the ignition
key if the driver leaves the car.
Make sure that children and other passengers cannot be trapped in any way when
closing the windows.
02 Instruments and controls
Power windows
Blocking power windows in the rear
doors
The light in the switch is extinguished
The rear door windows can be operated both
with the controls on each rear door and with
the controls on the driver’s door.
Front passenger seat
NOTE
02
If the car has electric child safety locks on
the rear doors, the light indicates that these
are also activated. The doors then cannot
be opened from the inside. A text message
is shown on the display when the electric
child safety locks are activated.
Front passenger seat
Blocking rear power windows and electric child
safety locks1.
The control in the front passenger door operates that window only.
The rear power windows can be blocked using the switch on the driver’s door control
panel.
The light in the switch is illuminated
The rear door windows can only be operated
from the driver’s door.
1
Option.
59
02 Instruments and controls
Power windows
Rear power windows
02
The rear door windows can be operated with
the control on each rear door or with the
switch on the driver’s door.
If the light in the switch for blocking the rear
power windows (located in the control panel
in the driver’s door) is lit, the rear door windows can only be operated from the driver’s
door.
The windows in the rear doors are operated
in the same way as the windows in the front
doors.
60
02 Instruments and controls
Rearview and door mirrors
Interior rearview mirror
Automatic dimming (option)
Bright light from behind is automatically
dimmed by the rearview mirror.
Rearview mirror with compass
(option in certain markets)
NOTE
The control is not available on mirrors with
automatic dimming.
Bright light from behind could be reflected in
the rearview mirror and dazzle the driver. Use
dimming when disturbed by light from behind.
Dimming
A. Normal position
B. Dimmed position.
02
The upper left-hand corner of the rearview
mirror has an integrated display that shows
the compass direction in which the front of
the car is pointing.
Eight different directions are shown with
English abbreviations: N (north), NE (north
east), E (east), SE (south east), S (south),
SW (south west), W (west) and NW (north
west).
If the compass is activated then it starts automatically in ignition position II or when the
engine is running.
61
02 Instruments and controls
Rearview and door mirrors
Switch the compass on or off by pressing the
button set into the rear of the mirror. Use a
straightened paper clip for example. The button is countersunk approximately 2.5 cm in
the mirror.
02
Set the correct zone for the compass
The earth is divided into 15 magnetic zones.
The correct zone must be selected for the
compass to function correctly.
– Ignition position II.
– Press and hold the button on the rear of
the mirror for approximately 3 seconds
until ZONE is shown (use a straightened
paper clip for example). The number for
the current area is shown.
62
– Press the button several times until the
number for the required geographic area
(1 –15) is shown. After several seconds the
display returns to show the compass direction, this means that the change of
zone is complete.
02 Instruments and controls
Rearview and door mirrors
02
Magnetic zones for the compass
Calibration
The compass may need calibrating to display
correctly. For best results, switch off all major
power consumers such as interior lighting,
ventilation fan, heated rear window etc. and
avoid having metal objects and magnetic objects close to the mirror.
– Stop the car in a wide open area with the
engine running.
– Press and hold the button on the rear of
the mirror (use a paper clip for example)
until CAL is shown (approx. 6 seconds).
– Drive slowly in a circle at a speed of no
more than 8 km/h until CAL disappears
from the display, which is when calibration
is complete.
Alternative calibration method
Drive off as usual. CAL disappears from the
display when calibration is complete.
63
02 Instruments and controls
Rearview and door mirrors
Door mirrors
Door mirrors with memory function
(option)
If the car has door mirrors with memory function, they work together with the memory
setting of the seat, see page 83.
Water and dirt-repellent coating
(option)
The front windows and/or door mirrors are
treated with a coating that ensures that the
view through the windows or in the mirrors is
good even if it is raining.
WARNING
02
Side windows and mirrors
treated with the water and
dirt-repellent coating are
marked with a small symbol. For information on
glass care, see page 169.
The driver-side door mirror is wide angled
to provide optimal vision. Objects may appear further away than they actually are.
The controls for adjusting the two door mirrors are at the front of the driver’s door armrest.
– Press the L button for the left-hand door
mirror or R for the right-hand door mirror.
The light in the button illuminates.
– Adjust the position with the joystick in the
centre.
– Press the L or R button again. The lamp
goes out.
WARNING
Adjust the mirrors before you begin driving.
64
Memory function in remote control
When you unlock the car with one of the remote controls and change the setting of the
door mirrors, these new settings are saved in
the remote control. The next time you unlock
the car with the same remote control and
open the driver’s door within five minutes,
the mirrors will assume their stored positions.
Laminated side windows (option)
The laminated windows in the front and rear
doors improve sound insulation in the passenger compartment and provide better protection against unauthorised entry.
Rearview and door mirrors
In certain weather conditions, the function of
the dirt-repellent coating is improved if the
door mirror defrosters are used, see page 73
or 75.
Defrost the door mirrors:
• if they are covered with ice or snow.
• in heavy rain and dirty road conditions.
• if they are misted.
NOTE
Do not use a scraper to remove ice from the
mirrors as this could scratch the glass and
the water and dirt-repellent coating could
be damaged.
02 Instruments and controls
Power sunroof (option)
Open positions
Sliding position
3
1
4
2
5
6
The sunroof controls are located in the roof
panel. The sunroof can be opened to two positions:
• Ventilation position, up at the rear edge
• Sliding/comfort position1, backwards/forwards
The ignition key must be in position I or II.
WARNING
If there are children in the car:
Switch off the supply to the power sunroof
by removing the ignition key if the driver
leaves the car.
1
In comfort position, the sunroof is not completely open in order to reduce the level of
wind noise.
1.
2.
3.
4.
5.
6.
Closing, automatic
Closing, manual
Opening, manual
Opening, automatic
Opening, ventilation position
Closing, ventilation position
Ventilation position
To open:
– Press the rear edge of the control (5) upward.
To close:
– Pull the rear edge of the control (6) downward.
Switch from ventilation position to comfort
position; pull the control rearwards to its end
position (4) and release.
Automatic operation
– Pull the control past the point of
resistance (3) to the rear end position (4)
or past the point of resistance (2) to the
forward end position (1) and release. The
sunroof opens/closes completely.
In order to open from comfort position to
maximum opening:
02
– Pull the control to the rear once more to
the end position (4) and release.
Manual operation
To open:
– Pull the control rearward to the point of
resistance (3). The sunroof moves toward
the fully open position as long as the
button is held in this position.
To close:
– Press the control forward to the point of
resistance (2). The sunroof moves toward
the closed position as long as the button
is held in this position.
WARNING
The sunroof’s pinch-protection function
only operates during automatic closing, not
manual.
65
02 Instruments and controls
Power sunroof (option)
Sunscreen
02
The sunroof features a manual, sliding interior sunscreen. The sunscreen slides back automatically when the sunroof is opened. Grip
the handle and slide the screen forwards to
close it.
Pinch protection
The sunroof’s pinch protection function is
activated if the hatch is blocked by an object.
If blocked, the sunroof will stop and automatically open to the previous position.
66
WARNING
The sunroof’s pinch protection function
only operates during automatic closing, not
during manual closing.
Make sure children’s hands are clear when
closing the sunroof.
02 Instruments and controls
02
67
General information on climate control ....................................................70
Manual climate control, AC ......................................................................72
Electronic climate control, ECC (option) .................................................. 74
Air distribution ..........................................................................................77
Fuel-driven heater (option) .......................................................................78
68
CLIMATE CONTROL
03
03 Climate control
General information on climate control
03
Air conditioning
Fault tracing and repair
The climate control system cools or heats,
and dehumidifies the air entering the passenger compartment. The car is equipped with
either manual (AC) or electronic climate control (ECC).
Entrust fault tracing and repair of the climate
control system to an authorised Volvo workshop only.
NOTE
The air conditioning can be switched off,
but to ensure the best possible air in the
passenger compartment and prevent the
windows from misting, it should always
be on.
Misting windows
Reduce the problem of windows misting up
on the inside by cleaning the windows. Use a
regular window cleaner.
Particle filter
Make sure that the multifilter/particle filter is
replaced regularly. Consult an authorised
Volvo workshop.
Ice and snow
Remove ice and snow from the climate control system air intake (the grille between the
bonnet and the windscreen).
70
Refrigerant
The air conditioning system contains R134a
refrigerant. This refrigerant contains no chlorine, which means that it is harmless to the
ozone layer. The system must only be
charged with R134a refrigerant. Have an authorised Volvo workshop carry out this work.
Cars with ECC
Actual temperature
The temperature you select corresponds to
the physical experience with reference to air
speed, humidity, exposure to sun, etc. which
affect the interior and exterior of the car.
Sensors
The sun sensor is on the upper portion of the
dashboard. Remember not to cover it. Do not
cover the passenger compartment temperature sensor on the climate control panel.
Side windows and sunroof
To ensure that the air conditioning works satisfactorily, close all side windows and the
sunroof (if fitted). Also, make sure the air
ducts in the parcel shelf are not blocked.
Acceleration
The air conditioning system switches off
temporarily at full acceleration. You may feel
a temporary rise in temperature.
Condensation
In warm weather, condensation from the air
conditioning system may drip under the car.
This is normal.
Fuel economy
With ECC, the air conditioning system is controlled automatically and is used just enough
to cool the passenger compartment and dehumidify the incoming air. This provides better fuel economy compared to conventional
systems where the air conditioning cools the
air to just above freezing point.
03 Climate control
General information on climate control
Air distribution
Panel vents in the dashboard
Panel vents in the door pillars
03
Incoming air is distributed through several
different vents located throughout the car.
A. Open
A. Open
B. Closed
B. Closed
C. Lateral airflow
C. Lateral airflow
D. Vertical airflow
D. Vertical airflow.
Aim the outer vents towards the side windows to remove misting from the front side
windows.
– Aim the vents toward the rear side windows to remove misting.
– Aim the vents inwards in the car for a
comfortable climate in the rear seat.
Bear in mind that small children can be sensitive to airflow and draughts.
Cold weather: Close the centre vents for optimum comfort and best demisting.
71
03 Climate control
Manual climate control, AC
Control panel
1
2
3
4
5
03
8
7
1. AC – ON/OFF
2. Recirculation
3. Air distribution
4. Rear window and door mirror defroster
5. Heated front seats
6. Heating/Cooling – right-hand side
7. Heating/Cooling – left-hand side
8. Fan
You must turn the fan knob (8) from the 0 position to engage the air conditioning.
Use the air conditioning at low temperatures
as well (0–15 °C) to dehumidify incoming air.
72
6
AC – ON/OFF
ON : Air conditioning is on.
It is controlled by the system’s AUTO function. This
way, incoming air is cooled
and dehumidified.
OFF : Off.
When the defroster function is activated the
air conditioning is automatically switched on
(can be switched off with the A/C button).
Heating/Cooling – left/right-hand side
Turn to set how warm or
cold the incoming air shall
be. For cooler air, the air
conditioning must be engaged.
Heated front seats
Proceed as follows for
heated front seat(s):
03 Climate control
Manual climate control, AC
– Press once: High heat – both LEDs in the
switch light up.
– Press twice: Low heat – one LED in the
switch lights up.
– Press three times: Heating switched off –
no LEDs in the switch light up.
An authorised Volvo workshop can adjust the
temperature.
Fan
Fan speed can be increased or decreased by
turning the knob. If the
knob is set to 0 then the air
conditioning is not engaged.
Rear window and door mirror
defrosters
Use this button to quickly
remove misting and ice from
the rear window and door
mirrors, see page 47 for further information about this
function.
Recirculation
Recirculation can be used
to shut out bad air, exhaust, etc. from the passenger compartment. The air in
the passenger compartment
is then recirculated, i.e. no air from outside
the car is taken into the car when this function is activated. Recirculation (together with
the air conditioning system) cools the passenger compartment more quickly in a warm
climate.
If you allow the air in the car to recirculate,
there is a risk of icing and misting, especially
in winter. The timer function minimises the
risk of ice, misting and bad air.
Activate the function as follows:
– Press
for more than 3 seconds.
The LED flashes for 5 seconds. The air
recirculates in the car for 3–12 minutes
depending on the outside temperature.
– The timer function is activated each time
you press
.
To switch off the timer function:
Air distribution
Use the air distribution control positions (marked with
dots) between the different
symbols to fine-tune air distribution for maximum comfort.
03
Defroster
The defroster on the air distribution control is used to
quickly remove misting and
ice from the windscreen and
side windows. Air flows to
the windows at high speed.
When the function is selected the following
also takes place to provide maximum dehumidification of the air in the passenger compartment:
• the air conditioning (AC) is automatically
engaged (can be switched off with the A/C
button)
• recirculation is automatically disengaged.
When the defroster is switched off, the climate control returns to the previous settings.
– Press
again for more than
3 seconds. The LED illuminates for
5 seconds to confirm your selection.
73
03 Climate control
Electronic climate control, ECC (option)
Control panel
2
3
4
5
6
7
8
03
1
9
9
10
11
12
13
1.
2.
3.
4.
5.
6.
AC – On/Off
Recirculation/Multifilter with sensor
Recirculation
AUTO
Air distribution
Passenger compartment temperature
sensor
7. Defroster, windscreen and side
windows
8. Rear window and door mirror defroster
9. Seat heater – right-hand side
10. Seat heater – left-hand side
11. Temperature – right-hand side
74
12. Temperature – left-hand side
13. Fan
settings are switched off when AUTO is
pressed.
AUTO
Temperature
The AUTO function
automatically regulates
climate control so that the
selected temperature is
attained. The automatic
function controls heating, air conditioning, air
quality sensor, fan speed, recirculation, and
air distribution. If you select one or more
functions manually, the other functions
continue operating automatically. All manual
The two knobs can be used
to set the temperature for
the passenger and driver’s
sides of the car. Remember
that the car does not heat
up or cool down any more
quickly even if you select a higher or lower
temperature than you want in the passenger
compartment.
03 Climate control
Electronic climate control, ECC (option)
Fan
Fan speed can be increased
or decreased by turning the
knob. If AUTO is selected,
fan speed is controlled
automatically. The previously set fan speed is disconnected.
NOTE
If the knob for the fan has been turned so far
that the left LED above the knob lights up
with an orange light, the fan and the air conditioning system are switched off.
Rear window and door mirror
defrosters
Use this button to quickly
remove misting and ice
from the rear window and
door mirrors, see page 48
for further information
about this function.
Defroster, windscreen and side
windows
Used to quickly remove
misting and ice from the
windscreen and side windows. Air flows to the windows at high speed. The
LED in the defroster button illuminates when
this function is engaged.
When the function is selected, the following
also takes place to provide maximum dehumidification of the air in the passenger compartment:
• the air conditioning (AC) is automatically
engaged (can be switched off with the A/C
button)
• recirculation is automatically disengaged.
When the defroster
is switched off the
climate control returns to the previous settings.
Air distribution
• Air to windows
• Air to head and body
• Air to legs and feet
Press AUTO to return to
automatic air distribution.
When the defroster function is activated the
air conditioning is automatically switched on
(can be switched off with the A/C button).
Heated front seats
Proceed as follows for
heated front seat(s):
03
– Press once: High heat – both LEDs in the
switch light up.
– Press twice: Low heat – one LED in the
switch lights up.
– Press three times: Heating switched off –
no LEDs in the switch light up.
An authorised Volvo workshop can adjust the
temperature.
AC – ON/OFF
ON : Air conditioning is on.
It is controlled by the system’s AUTO function. This
way, incoming air is cooled
and dehumidified.
OFF : Off.
75
03 Climate control
Electronic climate control, ECC (option)
Recirculation
03
Recirculation can be used
to shut out bad air, exhaust, etc. from the passenger compartment. The air in
the passenger compartment
is then recirculated, i.e. no
air from outside the car is
taken into the car when this
function is activated.
If you allow the air in the car to recirculate,
there is a risk of icing and misting, especially
in winter.
The timer function (cars with Multifilter and
air quality sensor have no timer function)
minimises the risk for ice, misting and bad
air.
When the air quality sensor is active, the
green AUT LED illuminates in
.
Operation
Press
to activate the air quality
sensor (normal setting).
Activate the function as follows:
Or:
– Press
for more than 3 seconds.
The LED flashes for 5 seconds. The air
recirculates in the car for 3–12 minutes
depending on the outside temperature.
– The timer function is activated each time
you press
.
To switch off the timer function:
Select one of the following three functions by
pressing
repeatedly.
Press
again for more than 3 seconds.
The LED illuminates for 5 seconds to confirm
your selection.
76
Air quality system (option)
The air quality system consists of a multifilter and a
sensor. The filter separates
gases and particles, thereby reducing the volume of
odours and pollutants entering the passenger compartment. When the sensor detects
contaminated outside air, the air intake is
closed and the air in the passenger compartment is recirculated.
• The AUT LED illuminates. The air quality
sensor is now activated.
• No LED illuminates. Recirculation is not
activated unless needed to cool in a warm
climate.
• The LED MAN lights. Recirculation is now
activated.
Keep the following in mind:
• Make it a rule to have the air quality sensor
activated at all times.
• Recirculation is limited in cold weather to
avoid misting.
• If misting occurs, you should deactivate
the air quality sensor.
• If misting occurs, you can use the defroster functions for the windscreen, side windows and rear window, see page 75.
Follow the Volvo service programme for the
recommended replacement interval of the
Multifilter. If the car is used in environments
where more contaminants are present, it may
be necessary to change the Multifilter more
often.
03 Climate control
Air distribution
Air distribution
Use:
Air distribution
Use:
Air through front and rear
panel vents.
When you want good
cooling in a warm
climate.
Air to floor. There is a
certain amount of airflow
to the panel vents and the
defroster vents for the
windscreen and side
windows.
When you want to warm
your feet.
Air to floor and panel
vents.
In sunny weather with
cool outside temperatures.
Air to windows.
Air is not recirculated in this
position. Air conditioning is
always engaged. There is a
certain amount of airflow to
the panel vents.
When you want to
remove ice and
misting. High fan
speed is good for this.
Air to both floor and
windows. There is a certain
amount of airflow to the
panel vents.
When you want
comfortable conditions
and good demisting in
a cold climate. Not too
low a fan speed.
03
77
03 Climate control
Fuel-driven heater (option)
General
on. At temperatures of –10 °C and below, the
maximum running time of the parking heater
is 60 minutes.
If the parking heater does not start despite
repeated attempts, a message is shown in
the display. Contact an authorised Volvo
workshop.
03
WARNING
The electrical system must be "awakened"
before the parking heater can be programmed.
This is most easily done by:
• pressing the READ button or
• activating main beam or
• turning on the ignition.
The parking heater can be started immediately or set with two different start times using TIMER 1 and TIMER 2. Start time refers
to the time the car should be heated and
ready.
The car’s electronic system calculates when
heating should be started based on the outside temperature. If the outside temperature
exceeds 25 °C, the heater does not switch
78
The car must be outdoors when the parking
heater is used.
Switch off the parking heater before refuelling. Spilled fuel could be ignited.
Check in the information display that the
parking heater is off. (When the additional
heater is running, PARK HEAT ON is
shown in the display.)
Messages in the display
Once the settings for TIMER 1, TIMER 2 and
Direct Start are activated, the amber warning symbol in the combined instrument panel
illuminates and explanatory text is shown in
the display.
When you leave the car, you will receive a
message regarding the current settings of
the system.
Warning decal on fuel filler flap.
Parking on a hill
If you park your car on a steep incline, the
front of the car should be facing up the slope
to ensure the supply of fuel to the parking
heater.
Car clock/timer
For safety reasons, all timer settings will be
cleared if the car clock is reset after timer
settings have been made.
03 Climate control
Fuel-driven heater (option)
Setting TIMER 1 and 2
For reasons of safety, you can only programme times for the following 24 hours, not
several days in a row.
– Use the ring (B) to toggle to TIMER 1.
– Briefly press the RESET button (C) so that
the hours setting starts to flash.
– Use the ring (B) to set the desired hours.
– Briefly press the RESET button so that the
minutes setting starts to flash.
– Use the ring (B) to set the desired minutes.
– Briefly press the RESET button to confirm
your setting.
– Press the RESET button to activate the
timer.
After setting TIMER 1, toggle to TIMER 2.
Settings are made the same way as for
TIMER 1.
Deactivating timer-started parking
heater
– Proceed as follows to manually switch off
the parking heater before the set time has
elapsed:
– Press the READ button (A).
– Use the ring (B) to toggle to PARK HEAT
TIMER 1 (or 2). The text ON flashes.
– Press the RESET button (C). The text OFF
is shown with a constant glow and the
parking heater is switched off.
Direct start of the parking heater
– Use the ring (B) to toggle to DIRECT
START.
– Press the RESET button (C) to make the
ON and OFF options available.
– Select ON.
The parking heater will now run for
60 minutes. Heating of the passenger compartment will begin as soon as the engine
coolant has reached an adequate temperature.
Deactivating direct-started parking
heater
– Use the ring (B) to toggle to DIRECT
START.
– Press the RESET button (C) to make the
ON and OFF options available.
– Select OFF.
If this is the case, a message will appear in
the display. Acknowledge the message using
the READ button (A).
IMPORTANT
Repeated use of the parking heater combined with short journeys may discharge
the battery and impair starting.
If the parking heater is used regularly, the
car must be driven for the same time as the
parking heater is used in order to ensure
that the alternator has time to charge the
battery.
03
Additional heater (diesel)1
Extra heat from the additional heater may be
required in cold weather to reach the correct
temperature in the passenger compartment.
The additional heater starts automatically
when extra heat is required if the engine is
running. It is switched off automatically when
the correct temperature is reached or when
the engine is switched off.
Battery and fuel
If the battery is not sufficiently charged or the
petrol tank is close to empty, the parking
heater will be switched off.
1
Certain countries
79
Front seats ...............................................................................................82
Interior lighting .........................................................................................84
Storage spaces in the passenger compartment .....................................86
Rear seat ..................................................................................................90
Cargo area ................................................................................................92
80
INTERIOR
04
04 Interior
Front seats
Seating position
5. Backrest rake: turn the wheel.
6. Control panel for power seat.
Floor mats (option)
Volvo supplies floor mats especially produced for your car.
WARNING
Adjust the position of the driver’s seat before setting off, never while driving.
Check that the seat is locked in position.
Lowering the front seat backrest
(option)
04
The driver’s and passenger seats can be adjusted to the optimum sitting and driving positions.
1. Forward/backward: lift the handle to adjust the distance to the steering wheel and
pedals. Check that the seat is locked after
changing position.
2. Raise/lower front edge of seat cushion:
pump up/down1.
3. Raise/lower seat: pump up/down
4. Lumbar support2, turn the wheel.
82
1
The control panel (2) is not available with certain upholstery alternatives.
2
Also applies to power seat.
The passenger seat backrest can be folded
forward to make room for long loads.
– Move the seat as far back as possible.
– Adjust the backrest to an upright position
90 degrees.
– Lift the catches on the rear of the backrest
while folding it forwards.
– Slide the seat forward so that the head
restraint is "locked in place" under the
glovebox.
WARNING
The floor mat at the driver’s seat must be
firmly fitted and secured in the attachment
clips to prevent it from being trapped
around and under the pedals.
04 Interior
Front seats
Power seat (option)
seat again. Only one of the seat’s motors can
be used at a time.
Seat with memory function (option)
Key memory in remote control key
The driver’s seat positions are stored in the
key memory when the car has been locked
with the remote control key. When the car is
unlocked with the same remote control key
the driver’s seat and rearview mirrors adopt
the stored positions when the driver’s door is
opened.
NOTE
The key memory is independent of the seat
memory.
The seats can be adjusted for a certain time
after unlocking the door with the remote control without the key being inserted into the ignition switch. The seats can always be set
when the ignition is on.
Power seat (option)
1. Front edge of seat cushion up/down
2. Seat forward/rearward
3. Seat up/down
4. Backrest rake
Overload protection is deployed if any seat is
blocked. If this occurs, switch off the ignition
and wait a short time before operating the
04
Emergency stop
If the seat accidentally begins to move, press
one of the buttons to stop the function.
Buttons for memory function
Store setting
– Adjust seat.
– Press and hold button MEM while pressing button 1, 2 or 3 at the same time.
WARNING
Risk of crushing. Make sure that children do
not play with the controls.
Check that there are no objects in front of,
behind or under the seat during adjustment.
Ensure that none of the rear seat passengers can be trapped.
Using a stored setting
Press one of the memory buttons 1 – 3 until
the seat stops. If you release the button then
the movement of the seat will stop.
83
04 Interior
Interior lighting
Reading lamps and interior lighting
Automatic lighting
All reading lamps and interior lighting are
switched off automatically after 10 minutes
from when the engine is switched off. Each
type of lighting can be switched off manually
before this.
04
Passenger compartment lighting and reading
lamps.
1. Reading lamp left-hand front
2. Interior lighting
3. Reading lamp right-hand front
The front reading lamps are switched on and
off using button (1) or (3).
The interior lighting is switched on and off
with a short press on button (2).
Rear reading lamps
4. Reading lamp left-hand rear
5. Reading lamp right-hand rear
The rear reading lamps are switched on and
off using button (4) or (5).
The interior lighting is switched on automatically1 and remains on for 30 seconds when:
• the car is unlocked from the outside using
the key or remote control
• the engine is switched off and the key is
turned to the 0 position.
The interior lighting is switched on and remains on for 10 minutes when:
• one of the doors is open if the interior
lighting is not switched off.
The interior lighting is switched off when:
• the engine is started
• when the car is locked from the outside
using the key or remote control.
Automatic lighting can be disengaged by
pressing and holding button (2) for more than
3 seconds. A short press on the button reengages automatic lighting.
The programmed times, 30 seconds and
10 minutes, can be changed by a Volvo
workshop.
1 The
function is light-dependent and is only
activated when it is dark.
84
04 Interior
Interior lighting
Vanity mirror1
04
The light illuminates automatically when the
cover is lifted.
1
Option in certain markets.
85
04 Interior
Storage spaces in the passenger compartment
04
86
04 Interior
Storage spaces in the passenger compartment
Storage spaces
1. Sunglasses compartment, driver’s side
(option)
2. Storage pocket.
3. Ticket clip.
4. Cup holder (option)
5. Glovebox.
6. Storage compartment in the centre console.
7. Compartment in door panel.
8. Cup holder in the armrest, rear seat.
9. Storage pocket.
Storage compartment in centre
console
Rear storage compartment cup holder
for rear seat passengers
04
WARNING
Ensure that no hard, sharp or heavy objects
lie or protrude in such a way that they could
cause injury during heavy braking.
Always secure large and heavy objects with
a seatbelt or cargo retaining straps.
1. Rear storage compartment
The rear storage compartment of the centre
console can be used to store CDs and the
like.
This storage compartment can be equipped
with privacy handset + holder (option)
2. Front storage compartment (roller cover)
This storage compartment can be equipped
with the following options:
• Cup holder (option)
• Ashtray (option)
To access the storage compartment/privacy
handset, press the button on the left-hand
side of the armrest and fold the tunnel compartment cover back.
To use the cup holder, press the button on
the right-hand side of the armrest and fold
the upper part of the tunnel compartment
cover back. The cup holder and cover can be
closed separately.
3. 12 V socket
4. Ashtray (option)
87
04 Interior
Storage spaces in the passenger compartment
Cup holder in front storage
compartment (option)
The cup holder can be easily removed:
Dashboard cup holder (option)
– Press the cup holder forwards (1), while
lifting it at the rear edge (2).
– Push the cup holder back (3), into the cutout, under the roller cover.
– Angle the front edge (4) of the cup holder
up and lift out.
Repeat the procedure in reverse order to refit
the cup holder.
04
• Press the holder to open.
• Press the holder in after use.
NOTE
Never use glass bottles. Remember also
that hot drinks may cause burns.
88
04 Interior
Storage spaces in the passenger compartment
Glovebox
Coat hanger
Bottle holder for rear seat passengers
(option)
04
The glovebox can be used to store things
such as the owner’s manual, maps, pens and
petrol cards.
The coat hanger is only intended for light garments.
Proceed as follows to use the bottle holder:
– Open the holder.
– Insert the bottle.
The bottle holder can also serve as a waste
bin. Insert a bag into the holder and fold it
over the edges.
NOTE
The bin does not require special bags. –
Use a regular plastic bag.
89
04 Interior
Rear seat
Cup holder in armrest, rear seat
(option).
Head restraints in the rear seat
04
Adjusting the vertical position of the head
restraint.
The centre seat head restraint can be adjusted vertically to suit the height of the passenger. Raise the head restraint as needed. The
release button on one of the supports must
be pressed to push the head restraint down.
See the illustration!
90
04 Interior
Rear seat
Lowering the rear seat backrest
WARNING
Always secure the load. During heavy braking the load may otherwise shift, causing
personal injury.
Cover sharp edges with something soft.
Turn off the engine and apply the parking
brake when loading or unloading long objects! You may accidentally knock the gear
lever or gear selector with the load and
cause a gear to engage and the car to move
off.
Both rear seat backrests can be tipped forward, together or individually. This makes it
easier to transport long objects.
A hatch in the right-hand rear backrest allows
you to transport long objects such as skis
and planks. Open the hatch as follows:
Fold the rear seat backrests as follows:
– Fold the left-hand backrest and centre
armrest forwards. See page 91.
– Release the hatch by pushing the catch
upward while folding the hatch forward.
– Tip the backrest back into position with
the hatch open.
– First check that the head restraints have
not been lowered.
– Pull the handle in the cargo area as shown
in the illustration.
– Fold the backrest forward.
04
91
04 Interior
Cargo area
Hatch for long objects
When removing
– Open the cover 30°.
– Pull straight up.
Carrier bag holder (option)
When fitting
– Move the cover back in the grooves behind the upholstery.
– Close the cover.
04
Use the seatbelt to secure the load.
Integrated booster cushion
The cover on the armrest/child seat has no
hinge. The cover must be removed before
the ski hatch is used.
NOTE
If the car is equipped with integrated booster cushion, fold this out first.
Open the hatch in the cargo area. Hang or
secure your grocery bags using the tensioning strap.
General
Payload depends on the car’s total kerb
weight, including any accessories that are
mounted.
Kerb weight includes the driver, the weight of
the fuel tank when filled to 90% and various
fluids, such as washer fluid and coolant.
Mounted accessories, i.e. towbar, load carriers, space box, etc., are included in the kerb
weight.
92
04 Interior
Cargo area
The load capacity of the car is reduced by
the number of passengers and their weight.
WARNING
The driving characteristics of the car
change based on its kerb weight and how
heavily it is loaded.
04
93
Keys and remote controls ........................................................................96
Locking and unlocking .............................................................................99
Child safety locks ................................................................................... 103
Alarm (option) ......................................................................................... 104
94
LOCKS AND ALARM
05
05 Locks and alarm
Keys and remote controls
Keys
1. Master key
This key opens all locks.
2. Service key1
This key is for the front door, ignition
switch and steering wheel lock only.
Your car is delivered with two master keys
and one service key1. One of the master keys
is collapsible and equipped with an integrated remote control.
1
Loss of key
If you should lose one of your keys, bring the
remaining keys to an authorised Volvo workshop. As a crime prevention measure, the
code for the lost key is erased from the system and the other keys must be re-coded in
the system.
05
The key blades’ unique code is available at
authorised Volvo workshops, who can order
new key blades.
2
A maximum of six remote controls/key
blades can be programmed and used for one
single car.
Immobiliser
The keys are equipped with coded chips.
This code must match the reader in the ignition switch. The car can only be started if the
correct key with the correct code is used.
1
96
certain markets only.
NOTE
The master key blade (1) must be fully extended (as illustrated) when starting the car.
Otherwise there is a risk that the immobiliser function will prevent the car from starting.
Ignition keys and electronic immobiliser
The ignition key must not hang with other
keys or metal objects on the same key ring.
The electronic immobiliser could be activated
erroneously and the car will not start.
05 Locks and alarm
Keys and remote controls
Remote control functions
Press and hold the red button (3) for at least
three seconds or press it twice during the
same time to activate the direction indicators
and the horn.
1
2
6
3
The panic alarm is deactivated automatically
after 25 seconds or by pressing any of the
buttons on the remote control.
Folding/opening key
The key can be folded by pressing button (6)
while folding the key blade into the keypad.
The folding key will open automatically with
one press of the button.
Approach lighting
Do the following when you approach the car:
5
4
Unlocking
Press the button (1) once to unlock all doors,
the boot lid and the fuel filler flap.
– Press the yellow button (4) on the remote
control.
The interior lighting, position/parking lamps,
number plate lighting and door mirror lamps
(option) will switch on. These lamps will remain lit for 30, 60 or 90 seconds. An authorised Volvo workshop can select a suitable
time setting.
05
To extinguish the approach lighting:
Boot lid
Press the button (2) twice to unlock the boot
lid only.
Panic alarm function
The panic alarm function can be used to attract attention in an emergency.
– Press the yellow button again.
Locking
Lock all doors, boot lid and fuel filler flap with
button 5.
There is a delay of approx. 10 minutes for the
fuel filler flap.
97
05 Locks and alarm
Keys and remote controls
Changing the remote control battery
05
Replace the battery after repeated failure by
the locks to respond when remote control
signals are transmitted within a normal distance.
– Remove the cover by carefully prising up
the rear edge of with a small screwdriver.
– Replace the battery (type CR 2032, 3 V) –
with the plus side facing up. Avoid touching the battery and its contact surfaces
with your fingers.
– Refit the cover. Make sure the rubber seal
is properly fitted and free from damage to
prevent water from entering.
98
– Turn the old battery in to your Volvo
workshop so that it can be disposed of in
an environmentally friendly manner.
05 Locks and alarm
Locking and unlocking
Locking/unlocking the car from
outside
Automatic relocking
Automatic locking
If none of the doors or the boot lid is opened
within two minutes of unlocking, all are
locked again automatically. This function
prevents the car from being left unlocked unintentionally. For cars with alarms, see
page 104.
05
The master key or remote control locks/unlocks all side doors and the boot lid simultaneously. The side door lock buttons and inside handles are disengaged.1
The fuel filler flap can be opened when the
car is unlocked. The flap remains unlocked
for 10 minutes after the car has been locked.
The car can be locked1 even if a door or the
boot lid is open. When the door is closed
there is a risk that the keys will be locked in.
1
Automatic locking is activated and reactivated from the control panel in the driver’s door.
The function operates by locking the doors
automatically when the speed of the car exceeds 7 km/h. They remain locked until a
door is opened from the inside or when all
doors are unlocked from the control panel.
Activating/deactivating automatic
locking
– The ignition key must be in position I or II.
– Press the READ button in the left-hand
stalk switch to acknowledge any messages in the information display.
Applies to certain markets
99
05 Locks and alarm
Locking and unlocking
– Press and hold the button for central
locking until a new message for lock status is shown in the information display.
The messages AUTOLOCK ACTIVATED (the
car is also locked when it moves) and
AUTOLOCK DEACTIVATED respectively are
shown in the information display.
Locking and unlocking the car from
the inside
– Press twice on the remote control button
to open the boot lid. The boot lid is
unlocked and opened slightly at the same
time.
If all doors are locked when the boot lid closes, it locks automatically.
05
All the doors and the boot lid can be locked
or unlocked simultaneously using the control
panel in the driver’s door (or passenger
door).
All doors can be locked using the lock button
on the control panel by each respective door.
If the car is not locked from the outside then
it can be unlocked by opening the door with
the handle.1
1
100
Unlocking/locking the boot lid with the
remote control
Proceed as follows in order to unlock the
boot lid only:
Applies to certain markets
05 Locks and alarm
Locking and unlocking
Unlocking the boot lid with the master
key
Service locking, boot lid (certain
countries)
To deactivate service locking
– Turn the master key to position II and
press the button again.
05
The master key should be used when unlocking the boot lid manually during emergencies
only, e.g. if the remote control does not function or the car is without power. Open the
boot lid as follows:
– Insert the master key into the upper or
lower section of the lid covering the lock.
– Twist up or down in order to prise the lid
off.
– Unlock the boot lid.
This function is beneficial if the car is left for
service, with a hotel parking valet or the like.
The service key is left with the staff, who can
open and drive the car but do not have access to the boot lid (or the glovebox if it is
locked with the master key).
To activate service locking
– Turn the master key to position II.
– Press the button. An LED in the button
lights when the function is activated and a
message is shown in the display.
101
05 Locks and alarm
Locking and unlocking
Locking the glovebox
Deadlocks1
The glovebox can only be locked/opened using the master key – not with the service key.
Your car has a special deadlock function,
which means that the doors cannot be
opened from the inside if they are locked.
Temporary deactivation of the
deadlocks and any detectors
Deadlocks can only be activated from the
outside by the driver’s door being locked
with the key or remote control. All doors must
be closed before deadlocks can be activated. Once activated, the doors cannot be
opened from the inside. The car can only be
unlocked from the outside via the driver’s
door or by using the remote control.
05
Deadlocks are engaged after a 25 second
delay once the doors have been closed.
If others prefer to remain seated in the car
with the doors locked from the outside – e.g.
during transport by ferry – it is possible to deactivate the deadlocks.
– Insert the key into the ignition switch, turn
it to position II and then back to position I
or 0.
– Press the button.
If the car is equipped with an alarm, movement and tilt detectors are also deactivated.
See page 105.
1
102
Certain countries
05 Locks and alarm
Child safety locks
The LED in the button illuminates until the car
is locked with the key or remote control. A
message is shown in the display as long as
the key remains in the ignition switch. The
sensors will be reactivated the next time the
ignition is switched on.
Mechanical child safety locks – rear
doors
WARNING
Do not allow anyone to remain in the car
without first deactivating the deadlock.
Child safety lock controls – right-hand rear door.
Control for child safety lock – left-hand rear
door.
The controls for the child safety locks are in
the rear edge of each rear door and are only
accessible when the door is open. Use a flat
metal object, such as a screwdriver, to turn
the control and thus activate or deactivate
the child safety lock.
05
A. Child-safe position – the doors cannot be
opened from inside; turn outwards.
B. Not child-safe position – the doors can be
opened from inside; turn inwards.
WARNING
Remember that in the event of an accident,
rear seat passengers cannot open the rear
doors from the inside if the child safety
locks are activated.
Therefore, keep the doors unlocked while
driving. In the event of an accident, rescue
personnel will then be able to enter the car
from the outside.
103
05 Locks and alarm
Alarm (option)
The alarm system
Activating the alarm
Automatic alarm activation
When the alarm is armed, it continually monitors all alarm inputs. The alarm is triggered if:
Press the LOCK button on the remote control. A long flash signal from the direction indicators of the car confirms that the alarm is
armed and all doors are closed. In certain
markets, the key or the control in the driver’s
door can be used to arm the alarm.
If none of the doors or the boot lid is opened
within two minutes of the alarm being disarmed, and the car was unlocked with the remote control, the car re-arms the alarm automatically. The car locks at the same time.
This function prevents you from accidentally
leaving the car without the alarm on.
•
•
•
•
•
•
05
•
•
the bonnet is opened
the boot lid is opened
a side door is opened
the ignition switch is turned with a nonapproved key or subjected to force
movement is detected in the passenger
compartment (if a motion sensor is fitted –
option for certain markets only)
the car is raised or towed away (if a tilt
sensor is fitted – option for certain markets
only)
a battery cable is disconnected.
anyone tries to disconnect the siren.
IMPORTANT
The alarm is fully armed when the car’s direction indicators have made one long flash
and the LED on the dashboard flashes once
every other second.
Deactivating the alarm
Press the UNLOCK button on the remote
control. Two short flashes from the car’s direction indicators confirm that the alarm has
been deactivated.
If the remote control batteries are discharged
then the alarm can be disarmed by turning
the key to ignition position II.
In certain countries (e.g. Belgium, Israel) the
alarm is reactivated after a certain delay if the
driver’s door was opened and closed but the
car was not re-locked.
Deactivating a triggered alarm
Press the UNLOCK button on the remote
control if the alarm sounds and you wish to
deactivate it. Two short flashes of the direction indicators signal confirmation.
Audio signal – Alarm
The audio signal is given from a siren with a
reserve battery. Each alarm signal lasts
25 seconds.
Visual signal – Alarm
When the alarm is triggered, all direction indicators flash for 5 minutes or until the alarm is
deactivated as described earlier.
104
05 Locks and alarm
Alarm (option)
Temporary deactivation of detectors
and deadlocks
The sensors will be reactivated when the ignition is restarted.
If your car has deadlocks, they are reactivated at the same time. See page 102.
Indicator lamp on the dashboard
(certain countries)
An indicator lamp (LED) at the top of the
dashboard indicates alarm status:
To avoid inadvertently triggering of the alarm,
for example when leaving a dog in the car or
during a ferry crossing, the movement and tilt
detectors can be temporarily deactivated:
1. Insert the key in the ignition switch, turn it
to position II and then back to position I
or 0.
2. Press the button.
The LED in the button lights until you lock the
car with the key or remote control.
A message will be shown in the display as
long as the key remains in the ignition switch.
• Lamp not lit: Alarm is deactivated.
• The lamp flashes once every other second
after the car’s direction indicators have
made one long flash signal: Alarm is
armed.
• Lamp flashes quickly, after deactivating
the alarm and until the ignition is switched
on: The alarm has been triggered.
If there is a fault in the alarm system, a message appears in the display.
05
If the alarm system does not function correctly, have an authorised Volvo workshop
examine the car.
IMPORTANT
Do not attempt to repair or modify alarm
system components. All such attempts can
affect terms of insurance.
105
05 Locks and alarm
Alarm (option)
Testing the alarm system
05
Testing the passenger compartment
motion sensor:
– Open all the windows.
– Activate the alarm. Alarm activation is
confirmed with a slow flash of the LED.
– Wait 30 seconds.
– Test the movement detector in the passenger compartment by lifting a bag or
similar from the seat cushion. The alarm
will now sound and flash.
– Deactivate the alarm by unlocking the car
with the remote control.
Testing the doors
– Arm the alarm.
– Wait 30 seconds.
– Unlock the driver’s door with the key
blade.
– Open one of the doors. The alarm system
will sound and flash.
– Repeat the test for the other doors.
– Deactivate the alarm by unlocking the car
with the remote control.
106
Testing the bonnet
– Get into the car and deactivate the movement detector.
– Arm the alarm (remain in the car and lock
the doors with the button on the remote
control).
– Wait 30 seconds.
– Open the bonnet with the handle under
the dashboard. The alarm will now sound
and flash.
– Deactivate the alarm by unlocking the car
with the remote control.
Testing the boot lid:
– Arm the alarm.
– Wait 30 seconds.
– Unlock with the key on the driver’s side
without opening any of the doors.
– Open the boot lid with the handle. The
alarm will now sound and flash.
– Deactivate the alarm by unlocking the car
with the remote control.
05 Locks and alarm
05
107
General ................................................................................................... 110
Refuelling ............................................................................................... 113
Starting the car ...................................................................................... 115
Manual gearbox ..................................................................................... 118
Automatic gearbox ................................................................................. 119
Brake system ......................................................................................... 123
Stability and traction control system ..................................................... 125
Active chassis – FOUR-C ....................................................................... 127
Parking assistance ................................................................................. 128
Towing and recovery .............................................................................. 130
Start assistance ..................................................................................... 132
Driving with a trailer .............................................................................. 133
Towing equipment .................................................................................. 135
Detachable towbar ................................................................................. 137
Load on the roof ..................................................................................... 142
Adjusting headlamp pattern .................................................................. 144
BLIS (Blind Spot Information System) – option ...................................... 149
108
STARTING AND DRIVING
06
06 Starting and driving
General
Economical driving
Do not drive with an open boot lid!
Your new car – slippery road surfaces
Economical driving results from driving gently with anticipation and adapting your driving style and speed to the situation.
If you drive with the boot lid open, some of
the exhaust gases and poisonous carbon
monoxide could be sucked into the car
through the cargo area. If you must drive a
short distance with the boot lid open, proceed as follows:
Driving on a slippery road may feel different
depending on whether you choose a car with
a manual or an automatic gearbox. Practice
skid driving under controlled conditions so
that you know how your new car reacts.
Keep in mind the following:
06
110
• Drive the engine to operating temperature
as soon as possible! That is to say: do not
let the engine idle, but drive with a light
load as soon as you can.
• A cold engine consumes more fuel than a
warm one.
• Avoid driving short distances where the
engine never has time to reach operating
temperature.
• Drive gently! Avoid unnecessary quick accelerations and heavy braking.
• Do not drive with unnecessary, heavy
loads in the car.
• Do not use winter tyres when the roads
are clear and dry.
• Remove the load carrier when it is not in
use.
• Do not open side windows unnecessarily.
– Close all windows.
– Distribute the air between the windscreen
and floor while running the fan at high
speed.
06 Starting and driving
General
Driving in water
The car can be driven through water at a
maximum depth of 25 cm at a maximum
speed of 10 km/h. Extra caution should be
exercised when passing through flowing
water.
IMPORTANT
Engine damage can occur if water enters
the air filter.
In greater depths, water can enter the transmission. This reduces the lubricating ability
of the oils and shortens the service life of
these systems.
When driving in water, maintain a low speed
and do not stop the car. When the water has
been passed, depress the brake pedal lightly
and check that full brake function is
achieved. Water and mud for example can
make the brake linings wet resulting in delayed brake function.
NOTE
Clean the electric contacts of the electric
engine block heater and trailer coupling after driving in water and mud.
IMPORTANT
Do not let the car stand with water over the
sills for any long period of time. This could
cause electrical malfunctions.
In the event of stalling in water, do not try to
restart. Tow the car out of the water.
Do not overload the battery
The electrical functions in the car load the
battery to varying degrees. Avoid having the
ignition key in position II when the engine is
turned off. Use position I instead, as less
power is used. The 12 volt outlet in the cargo
area supplies power even when the ignition
key is removed.
Examples of functions that use a lot of
power:
• ventilation fan
• windscreen wipers
• audio system
• parking lights.
Also, be aware of different accessories that
load the electrical system. Do not use functions which use a lot of power when the engine is switched off.
06
A text is shown in the display in the combined instrument panel if battery voltage is
low and remains until the engine has started.
The energy-saving function shuts down certain functions or reduces the load on the battery by, for example, slowing the ventilation
fan and switching off the audio system.
Charge the battery by starting the engine.
111
06 Starting and driving
General
Do not allow the engine and cooling
system to overheat
Under certain conditions, e.g. when driving in
hilly terrain and with a heavy load, especially
in warm weather, there is a risk of the engine
and cooling system overheating.
To avoid overheating in the cooling
system:
• Drive at low speeds if driving with a trailer
up a long incline.
• Switch off the air conditioning temporarily.
• Avoid letting the engine idle.
• Do not turn the engine off immediately you
stop, if the car has been driven hard.
• Remove any auxiliary lamps from in front
of the grille if driving in extreme high
temperatures.
06
To avoid the engine overheating:
Do not exceed engine speeds of 4500 rpm
(diesel engine: 3500 rpm) if driving with a
trailer or caravan in hilly terrain. The oil temperature can become too high.
112
06 Starting and driving
Refuelling
Opening the fuel filler flap
Fuel filler flap
Refuelling with petrol
High outside temperatures can cause some
overpressure in the tank. Open the cap
slowly.
Do not overfill the tank but fill until the pump
nozzle cuts out.
NOTE
NOTE
After refuelling, replace the fuel cap and
turn until one or more clicks is heard.
WARNING
Never carry an activated mobile phone
when refuelling – the ring signal could cause
spark build-up and ignite petrol fumes,
leading to fire and injury.
The fuel cap is inside the fuel filler flap on the
right-hand rear wing and hangs up on the inside
of the fuel filler flap.
The fuel filler flap can be opened when the
car is unlocked.
NOTE
The filler flap remains unlocked for ten minutes after the car has been locked.
Excess fuel in the tank can overflow in hot
weather.
Do not add cleaning additives unless specifically recommended by a Volvo workshop.
IMPORTANT
Petrol-powered cars must always be refuelled with unleaded petrol so as not to damage the catalytic converter.
Refuelling with diesel
At low temperatures (–5 °C till –40 °C), a paraffin precipitate may form in the diesel fuel,
which can lead to ignition problems. Make
sure you use a special winter grade fuel
during cold periods.
06
113
06 Starting and driving
Refuelling
Emergency opening of the fuel filler
flap
06
The fuel filler flap can be opened manually
when necessary if it cannot be opened
normally.
There is a detachable hatch on the righthand panel of the cargo area. Undo this, insert your hand and locate the flap’s electrical
lock – location is approximately inside the
rear edge of the fuel filler flap. Pull the lock
plunger straight back.
WARNING
There are sharp edges behind the panel so
move your hands slowly and carefully.
114
06 Starting and driving
Starting the car
Before starting the engine
Starting the engine
– Apply the parking brake.
Automatic gearbox
– Gear selector in position P or N.
Manual gearbox
Shift the gear lever into neutral and hold the
clutch pedal fully depressed. This is particularly important in very cold conditions.
WARNING
Never remove the ignition key from the
steering lock while driving or when the car is
being towed. The steering lock could otherwise be activated, making it impossible to
steer the car.
The ignition key must be in position II when
the car is being towed.
NOTE
The idling speed can be noticeably higher
than normal for certain engine types during
cold starting. This is so that the emissions
system can reach normal operating temperature as quickly as possible, which minimises exhaust emissions and protects the
environment.
The master key blade must be fully extended (as illustrated on page 96) when starting
the car. Otherwise there is a risk that the immobiliser function will prevent the car from
starting.
Petrol
Turn the ignition key to the start position.
If the engine does not start within
5-10 seconds, release the key and repeat
the start attempt.
Diesel
Turn the ignition key to the drive position.
An indicator symbol in the combined instrument panel illuminates to show that engine
preheating is underway.
Turn the ignition key to the start position
when the indicator symbol goes out.
Diesel particle filter (DPF)
Diesel cars are equipped with a particle filter,
which results in more efficient emission control. The particles in the exhaust gases are
collected in the filter during normal driving.
So-called "regeneration" is started in order to
burn away the particles and empty the filter.
This requires the engine to have reached normal operating temperature.
Regeneration of the filter takes place automatically at an interval of approximately
300-900 km depending on driving conditions. Regeneration normally takes between
10 and 20 minutes. During this time fuel consumption may increase slightly.
Regeneration in cold weather
If the car is frequently driven short distances
in cold weather then the engine does not
reach normal operating temperature. This
means that regeneration of the diesel particle
filter does not take place and the filter is not
emptied.
06
When the filter has become approximately
80 % full of particles, a yellow warning triangle illuminates on the dashboard, and the
message, SOOT FILTER FULL SEE MANUAL
is shown on the dashboard display.
115
06 Starting and driving
Starting the car
Start regeneration of the filter by driving the
car until the engine reaches normal operating
temperature, preferably on a main road or
motorway. The car should then be driven for
approximately 20 minutes more. When regeneration is underway the engine power is
reduced.
Ignition keys and electronic
immobiliser
When regeneration is complete the warning
message is cleared automatically.
Never rev the engine hard straight after a
cold start! If the engine does not start or misfires, contact a Volvo workshop.
Use the parking heater (option) in cold
weather so that the engine reaches normal
operating temperature more quickly.
IMPORTANT
06
116
If the filter fills up it may be incapable of
functioning. Then it can be difficult to start
the engine and there is a risk that the filter
will have to be replaced.
The ignition key must not hang with other
keys or metal objects on the same key ring.
The electronic immobiliser could otherwise
be activated accidentally. If this happens, –
remove the excess keys and restart the car.
WARNING
Never remove the ignition key from the
steering wheel lock while driving or when
the car is being towed! Never switch off the
ignition (key to position 0) or remove the ignition key while the car is in motion. The
steering wheel lock could be activated,
making the car impossible to steer.
06 Starting and driving
Starting the car
Ignition switch and steering lock
0 – Locked position
The steering wheel locks
when the ignition key is removed.
I – Radio position
Certain electrical components can be switched on.
The engine’s electrical system is not activated.
II – Driving position
The key position when driving. The car’s entire electrical system is connected.
the wheel back and forth to make it easier to
turn the key.
Ensuring that the steering wheel is locked
when you leave the car minimises the risk of
theft.
Speed related power steering1
If the car is equipped with speed related
power steering this means that it is easier to
steer at low speeds, which in turn facilitates
parking etc.
As speed is increased the steering force is
adapted to give the driver enhanced
sensitivity.
06
III – Start position
Starter motor. The starter
motor is connected. Release the key once the engine has started. The key
automatically springs back
to the driving position. If the
key is hard to turn, the front wheels may be
turned in such a way that there is tension in
the steering wheel lock. In which case, turn
1
Option
117
06 Starting and driving
Manual gearbox
06
Gear positions, five-speed
Reverse gear inhibitor
Gear positions, six-speed
Depress the clutch pedal fully with each gear
change. Remove your foot from the clutch
pedal between gear changes. Follow the appropriate shifting pattern.
Only engage reverse gear when the car is
stationary.
Depress the clutch pedal fully with each gear
change. Remove your foot from the clutch
pedal between gear changes. Follow the appropriate shifting pattern.
For the best possible fuel economy, use the
highest gear possible as often as possible.
118
To put the car in reverse, the gear lever must
first be moved to neutral (between 3rd
and 4th gear). Thus, reverse cannot be directly selected from 5th gear due to the reverse gear inhibitor.
For the best possible fuel economy, use the
highest gear possible as often as possible.
06 Starting and driving
Automatic gearbox
Cold start
Safety systems
When starting in low temperatures, the gear
changes can sometimes feel hard. This is
due to the gearbox oil’s viscosity at low temperatures. To minimise engine emissions, the
gearbox shifts up later than normal when the
engine is started at low temperatures.
Cars with an automatic gearbox have special
safety systems:
Turbo engine
When the engine is cold, the transmission
shifts gears at higher revs. This allows the
catalytic converter to reach normal operating temperature more quickly, with less exhaust emissions.
Adaptive system
The gearbox is controlled by what is known
as an adaptive system. The system continually monitors how the gearbox is behaving
and senses every gear change for optimum
change quality.
Keylock
To remove the ignition key, the gear selector
must be in the P position. The key is locked
in all other positions.
Parking position (P)
Stationary car with engine running:
– Hold your foot on the brake pedal when
moving the gear selector to another position.
Electric gear inhibitor – Shiftlock
Parking position (P position)
To be able to move the gear selector from the
P position to other gear positions, the ignition
key must be in position I or II and the brake
pedal must be depressed.
Lock-up function
The gears have a lock-up function (locked
gears), which gives better engine braking and
lower fuel consumption.
Mechanical gear selector inhibitor
Neutral position (N position)
The brake pedal must be depressed to move
the gear selector from position N to other
gear positions when the ignition key is in
position I or II.
The gear selector can be moved freely between N and D. Other positions are locked
with a latch that is released with the inhibitor
button on the gear selector.
06
Press the inhibitor button to move the lever
forward or back between the different gear
positions.
119
06 Starting and driving
Automatic gearbox
Manual positions
N – Neutral
N is the neutral position. No gear is engaged
and the engine can be started. Apply the
parking brake when the car is stationary with
the gear selector in position N.
D – Drive
D is the normal driving position. The car automatically shifts between the different gears
of the gearbox based on the level of acceleration and speed. The car should be stationary when selecting D from position R.
4 – Low gear
Up and downshifts between 1st, 2nd, 3rd
and 4th are automatic. There is no upshift to
5th gear.
06
P – Park
Select this position when you wish to start
the engine or park the car.
The car should be stationary when you
select P!
In P the gearbox is mechanically locked. Always apply the parking brake when parking
the car.
R – Reverse
The car should be stationary when you
select R.
120
Position 4 can be used:
• for mountain driving
• when driving with a trailer
• to increase engine braking.
3 – Low gear
Up and downshifts between 1st, 2nd, and
3rd are automatic. There is no upshift to
4th gear.
Position 3 can be used:
• for mountain driving
• when driving with a trailer
• to increase engine braking.
L – Low gear
Select L if you wish to drive in 1st or 2nd.
Position L gives the best engine braking for
mountain driving, etc.
06 Starting and driving
Automatic gearbox
Geartronic1
Manual positions, Geartronic
The S60 R with Geartronic has an S button
instead of a W button located at the gear selector. The gearbox sports programme is activated using the S button. An LED is lit in the
button to indicate active mode.
To move from the automatic driving position
D to a manual position, move the gear selector to the left. To go from position MAN to
the automatic driving position D, move the
selector to the right to position D.
The S programme provides sportier characteristics. It allows higher engine speed for the
gears while responding more quickly to acceleration. During active driving, the use of a
lower gear is prioritised – leading to a delayed upshift.
1
If the gear lever is moved to – (minus) the car
changes down a gear and engine brakes at
the same time. If the gear lever is moved
to + (plus) the car changes up a gear.
06
While driving
The manual gearshift mode can be selected
at any time while driving. The engaged gear
is locked until you choose another gear. The
car will only shift down automatically if you
slow down to a very slow speed.
S60 R has Geartronic as standard.
121
06 Starting and driving
Automatic gearbox
W – Winter
Kick-down
All-wheel drive – AWD
The W button1 by the gear
selector engages and disengages the winter
programme W. The
symbol W is shown in the
combined instrument panel
when the winter programme is activated.
When the accelerator is pressed all the way
to the floor, beyond the position normally regarded as full acceleration, a lower gear is
immediately engaged. This is known as kickdown.
All-wheel drive is always engaged.
The winter programme starts the gearbox in
3rd gear to make it easier to pull off on slippery roads. When the programme is engaged, lower gears are activated only by
kick-down.
The W programme can only be selected in
position D.
When maximum speed for this gear is
reached, or if the accelerator is released from
the kick-down position, the gearbox automatically changes up.
Kick-down is used when maximum acceleration is needed, such as for overtaking.
To prevent overrevving, the gearbox control
program has a protective downshift inhibitor.
The kick-down function 2 cannot be used in
the manual positions. Return to automatic
position D.
06
1
122
S60R with Geartronic has an S button instead.
2
Applies to Geartronic only.
All-wheel drive means that all four road
wheels are driven at the same time. Power is
automatically distributed between front and
rear wheels. An electronically controlled
clutch system distributes the power to the
pair of wheels that grips best. This provides
the best traction and prevents wheel spin.
Under normal driving conditions, the majority
of power is transmitted to the front wheels.
All-wheel drive improves driving safety in
rain, snow and icy conditions.
06 Starting and driving
Brake system
Brake servo
If the car is rolling or is being towed with the
engine turned off, the brake pedal must be
pressed about five times harder than when
the engine is running. If the brake pedal is
pressed when the engine is started, you will
feel the pedal drop. This is normal and due to
the brake servo becoming active. This may
be more noticeable if the car has emergency
brake assistance (EBA).
WARNING
The brake servo only works when the engine is running.
NOTE
If braking with the engine switched off,
press the brake pedal sharply once, not repeatedly.
Brake circuits
This symbol lights if a brake circuit
is not working.
If a fault should occur in one of the
circuits, it is still possible to brake
the car. The brake pedal will travel further
and may feel softer than normal. Harder
pressure on the pedal is needed to produce
the normal braking effect.
Dampness can affect braking
characteristics
Brake components become wet when the
car is driven in heavy rain, through pools of
water or when the car is washed. This may
alter brake pad friction characteristics so that
there is a delay before braking effect is noticed.
Press the brake pedal lightly from time to
time if driving for long stretches in rain or
slushy snow, as well as after setting off in
very damp or cold weather. This warms up
the braking surfaces and dries off any water.
It is also recommended to do this before
parking the car for a long period in such
weather conditions.
If the brakes are used heavily
When driving in the Alps or other roads with
similar characteristics, the car’s brakes are
heavily loaded even if the brake pedal is not
being depressed especially hard.
Because speed is often low, the brakes are
not cooled as effectively as when driving on
flat roads at higher speed.
method uses engine braking more efficiently
and requires the foot brake for only brief
periods.
Bear in mind that driving with a trailer puts an
additional load on the car’s brakes.
Anti-lock braking system (ABS)
The ABS system (Anti-lock Braking
System) is designed so that the
wheels do not lock when braking.
This retains the best possible steering response when braking. This improves
your ability to swerve to avoid obstacles. The
ABS system does not increase your total
braking capacity. However, as the driver you
have increased ability to steer and thus better control over the car, which in turn increases safety.
After the engine has started and reached a
speed of about 20 km/h, a short self-test can
be both heard and felt. When the ABS system functions, you can hear and feel pulses
in the brake pedal. This is completely normal.
06
So as not to overload the brakes, shift down
when driving downhill instead of using the
foot brake. Use the same gear driving downhill as you would use driving uphill. This
123
06 Starting and driving
Brake system
NOTE
You must depress the brake pedal fully to
take maximum advantage of the ABS system.
Do not release the pedal when you hear and
feel the ABS pulses.
Practice braking with the ABS system at a
suitable location such as a skid pan to practice skidding.
The ABS symbol lights up:
• for approximately two seconds during the
system test when the car is started.
• if the ABS system has shut down due to a
fault.
WARNING
06
124
If the BRAKE and ABS warning symbols are
illuminated at the same time, a fault may
have occurred in the brake system. If the
level in the brake fluid reservoir is normal,
drive carefully to the nearest authorised
Volvo workshop to have the brake system
checked.
If the brake fluid is under the MIN level in the
brake fluid reservoir, do not drive further before topping up the brake fluid.
The reason for the loss of brake fluid must
be investigated.
Electronic brake force distribution
system – EBD
The Electronic Brakeforce Distribution system (EBD) is an integrated part of the ABS
system. The EBD system controls the brake
force to the rear wheels so that the best possible braking force is always available. Pulses
will be heard and felt through the brake pedal
when the system regulates brake force.
Emergency Brake Assistance – EBA
The Emergency Brake Assistance function
(EBA) is integrated in the DSTC system and is
designed to provide immediate maximum
brake force whenever rapid braking is necessary. The system detects the need for heavier
braking by registering how quickly the brake
pedal is applied.
The EBA function is active at all speeds. For
safety reasons, it cannot be switched off.
When the EBA function is activated, the
brake pedal sinks while maximum braking
force is applied. Continue braking without releasing the brake pedal. The EBA function
disengages when the pressure on the brake
pedal is released.
NOTE
When EBA is activated the brake pedal lowers slightly more than usual, depress (hold)
the brake pedal as long as necessary. If the
brake pedal is released then all braking
ceases.
06 Starting and driving
Stability and traction control system
General
The Dynamic Stability and Traction Control
system (STC/DSTC) improves the car’s traction and helps the driver to avoid skidding.
A pulsing sound may be noticed during braking or acceleration when the system is in action. The car may accelerate more slowly
than expected.
Spin Control
The function prevents the driving wheels
from spinning against the road surface
during acceleration.
Reduced operation
Traction control system
The function is active at low speed and transfers power from the driving wheel that is
spinning to the one that is not.
The car is equipped with either STC or DSTC
depending on market. The table shows the
integral functions of the respective systems.
Function/system
STC
Active Yaw Control
DSTC1
X
Spin Control
X
X
Traction control system
X
X
1Option
in certain markets. Standard on S60 R.
Active Yaw Control
The function limits the driving and brake
force of the wheels individually in order to
stabilise the car.
System operation during skidding and acceleration can be partially deactivated.
Operation during skidding is delayed and so
allows more skidding which provides greater
freedom for dynamic driving.
Traction in deep snow or sand is improved as
acceleration is no longer limited.
06
Operation
– Turn thumbwheel (1) until the STC/DSTC
menu is shown.
DSTC ON means that the system function is
unchanged.
DSTC SPIN CONTROL OFF1 means that
system operation is reduced.
1
S60 R shows DSTC ANTI-SKID OFF.
125
06 Starting and driving
Stability and traction control system
– Press and hold RESET (2) until the
STC/DSTC menu is changed.
At the same time the symbol
illuminates
as a reminder that the system has been reduced. The system remains reduced until the
engine is next started.
WARNING
Suppressing system function may alter the
driving characteristics of the car.
NOTE
DSTC ON1 is shown for several seconds in
the display each time the engine is started.
1
06
Not available on S60 R.
Messages in the information display
TRACTION CONTROL TEMPORARILY OFF
means that the system has been temporarily
reduced due to excessive brake disc temperature.
The function is reactivated automatically
when the brakes have cooled.
ANTI-SKID SERVICE REQUIRED means that
the system has been disabled due to a fault.
– Stop the car in a safe place and turn off
the engine.
126
If the message remains when the engine is
restarted, drive to an authorised Volvo workshop.
The symbol illuminates and stays lit
Symbols in the combined instrument
panel
– Reminds that the STC/DSTC system has
been reduced.
Symbol for STC/DSTC
The symbol has different meanings
depending on how it is shown.
The symbol lights and goes out again
after approx. two seconds
– Indicates system check when the engine
is started.
The symbol flashes
– Indicates that the system is operating.
The symbol illuminates and stays lit
ANTI-SKID SERVICE REQUIRED is shown in
the display at the same time.
Fault indicator in STC/DSTC system:
– Stop the car in a safe place and turn off
the engine.
– Restart the car.
• If the warning symbol goes out, the fault
was temporary and it is not necessary to
visit a workshop.
• If the warning symbol remains lit, drive to
an authorised Volvo workshop to have the
system checked.
DSTC SPIN CONTROL OFF is shown in the
display at the same time.
Symbol for Warning
The symbol illuminates with a
constant yellow glow.
TRACTION CONTROL TEMPORARILY OFF
is shown in the display at the same
time.
• Indicates that the system has been temporarily reduced due to excessive brake
temperature.
• Automatic reactivation of the function
takes place when the brake temperature
has returned to normal.
WARNING
Under normal driving conditions, the
STC/DSTC system improves the car’s road
safety, but this should not be taken as a
reason to increase speed.
Always follow the usual precautions for safe
cornering and driving on slippery road surfaces.
06 Starting and driving
Active chassis – FOUR-C
Active chassis – FOUR-C1
FOUR-C switch in the centre
console (not S60 R)
The car is equipped with an
extremely advanced active
chassis system – Continuously Controlled Chassis
Concept – that is regulated electronically.
The functions of the system are based on a
number of sensors that continually monitor
the car’s movements and reactions, such as
vertical and lateral acceleration, vehicle
speed and wheel movements.
The FOUR-C control unit analyses data from
the sensors and performs the necessary
shock absorber setting adjustments up to
500 times per second. This results in extremely fast and accurate individual shock
absorber control, which contributes to variations in chassis characteristics.
Chassis characteristics can be modified at
any time while driving, when the nature of the
road changes or when you desire a change in
driving style. This change occurs in a matter
of milliseconds.
1
Option in certain markets. Standard on S60 R.
The effect produced by pressing the accelerator pedal is linked to your choice of chassis
characteristics. (only applies to R-models).
Comfort
Comfort mode adjusts the chassis setting so
that the body is insulated from uneven sections of the road surface, which allows for
better "glide". Shock absorption is softer and
body movements are minimal. This setting is
recommended for long-distance driving or
driving on slippery road surfaces.
When the ignition is switched off in Comfort
setting, the chassis will resume the same
mode when the car is re-started.
Sport
In Sport mode, steering responses are
quicker than in Comfort mode. Damping is
harder and the body follows the road surface
to minimise rolling during quick cornering.
The car feels sportier.
When the ignition is switched off in Sport
setting, the chassis will resume the same
mode when the car is re-started.
FOUR-C switch (S60 R)
Advanced2
In Advanced mode, shock absorber movements are minimal and optimised for maximum traction. Acceleration response is more
direct, the automatic gearbox shift schedule
is sporty, and roll during cornering is minimised. This setting is recommended for flat,
even road surfaces only.
06
When the ignition is switched off in
Advanced setting, the chassis will resume
the Sport mode when the car is re-started.
2
Only available on S60 R.
127
06 Starting and driving
Parking assistance
General1
Function
The system is activated automatically when
the car is started at which point the LED in
the switch for parking assistance illuminates.
The display shows the text message PARK
ASSIST ACTIVE if reverse gear is engaged or
if the front sensors detect an object.
Parking assistance is active at speeds below
15 km/h. The system is deactivated at higher
speeds. The system is reactivated when the
speed falls below 10 km/h again.
Parking assistance front and rear.
06
Parking assistance is used as an aid to parking. A signal indicates the distance to a detected object.
WARNING
Parking assistance does not relinquish the
driver’s own responsibility during parking.
The sensors have blind spots where objects
cannot be detected. Be aware of children
and animals near the car.
1
128
Depending on the market, the Parking assistance system may be either Standard, Option
or Accessory.
The frequency of the signal increases as you
come closer to an object in front of or behind
the car. If the volume of another sound
source from the audio system is high, this is
automatically muted.
The tone becomes constant at a distance of
about 30 cm. If there are objects within this
distance behind or in front of the car, the signal alternates between left and right-hand
speakers.
Rear parking assistance
The distance covered to the rear of the car is
about 1.5 m. Rear parking assistance is activated when reverse gear is engaged. The signal comes from the rear loudspeakers.
The system must be deactivated when reversing with a trailer, or bike carrier on the
towbar or similar. Otherwise the trailer or bike
carrier would trigger the sensors.
Rear parking assistance is deactivated automatically when towing a trailer if a Volvo genuine trailer cable is used.
Front parking assistance2
The distance covered to the front of the car is
about 0.8 metres. The signal comes from the
front loudspeakers.
Front parking assistance cannot be combined with extra lights because the sensors
are affected by the extra lights.
Fault indicator
If the yellow warning symbol illuminates and the display shows PARK
ASSIST SERVICE REQUIRED then
parking assistance is disengaged.
WARNING
Some sources may deceive the system with
false signals. Examples of such sources include horns, wet tyres on asphalt, pneumatic brakes and motorcycle exhaust pipes. Ice
and snow covering the sensors may also
cause false warning signals.
2 Provided
that the parking assistance is
mounted both front and rear.
06 Starting and driving
Parking assistance
Activating/deactivating
Cleaning the sensors
Parking assistance sensors.
Parking assistance can be deactivated with
the button in the switch panel. The LED in the
switch goes out. Parking assistance is reactivated with the switch and the LED illuminates.
The sensors must be cleaned regularly to ensure that they work properly. Clean them with
water and car shampoo.
06
129
06 Starting and driving
Towing and recovery
Do not tow the car to bump start it
Towing eye, rear
To fit the towing eye
Towing eye, front
Towing eye, rear
The towing eye is located in the tool kit in the
cargo area. You must screw the towing eye
into place before towing. The sockets and
covers for the towing eye are located on the
right-hand side of each bumper.
A - Release the cover1 by carefully prizing in
the groove with a coin for example.
If you bump start a car with manual gearbox,
the catalytic converter may be damaged.
Cars with automatic gearbox cannot be
bump started. Use a booster battery if the
battery is flat.
06
If the car must be towed
• Unlock the steering wheel lock so that the
car can be steered.
• Keep in mind the highest legally permissible speed.
• Bear in mind that the brake and power
steering servos do not function when the
engine is off. Approx. five times more
pressure must be exerted on the brake
pedal and steering requires much more
force than usual.
• Drive gently.
• Keep the towline taut in order to avoid
unnecessary jerking.
For automatic gearboxes
• The gear selector should be in position N.
• The maximum permissible speed when
towing a car with automatic gearbox
is 80 km/h.
• Longest permitted distance: 80 km.
• The engine cannot be towed to start
(bump started). See "Jump starting" on
the next page.
B - Screw the towing eye securely into place
up to the flange (C). You can use a wheel
wrench.
After use, unscrew the towing eye and refit
the cover.
To screw in the rear towing eye, you must
first remove a plastic bolt from the bracket
for the rear towing eye. Use the wheel
wrench from the tool kit to unscrew the plastic bolt. Refit the plastic bolt after use.
1 The
130
method of opening the cover may vary.
06 Starting and driving
Towing and recovery
NOTE
The towing eye cannot be fitted in the rear
bracket on cars with towbar. In which case,
secure the tow rope in the towbar. For this
reason, it is advisable to always store the
detachable towbar in the car.
Recovery
The towing eye may only be used for towing
on roads, not for recovery after driving into a
ditch or the like. Professional help should be
called for recovery.
06
131
06 Starting and driving
Start assistance
Starting with a donor battery
–
–
–
If for some reason the battery in your car is
discharged, you can "borrow" current from a
spare battery or another car’s battery to start
the engine. Always check that the clamps are
fastened properly to prevent sparking during
the start attempt.
06
To avoid the risk of explosion, we recommend you do exactly as follows.
– Turn the ignition key to position 0.
– Ensure that the donor battery is 12 volt.
– If the booster battery is in another car,
stop the engine of that car and make sure
the cars are not touching.
– Connect the red cable between the booster battery positive terminal (1+) and the
red connection in the engine
compartment (2+).
132
–
–
Attach the clamp to the contact point
located beneath a small black cover with a
plus sign which is integrated in the fuse
box cover.
Connect one clamp of the black cable to
the negative terminal of the booster battery (3–).
Connect the other clamp of the black
cable to the lifting eye on the car’s
engine (4–).
Start the engine of the "booster car". Let
the engine run a few minutes at a speed
slightly higher than idle, 1500 rpm.
Start the engine of the car with the flat
battery.
Remove the clamps in reverse order.
NOTE
Do not remove the clamps during the start
attempt (risk of spark build-up).
WARNING
The battery can generate oxyhydrogen gas,
which is highly explosive. One spark, which
can be generated if you connect the jump
leads incorrectly, is sufficient to make the
battery explode.
The battery contains sulphuric acid, which
can cause serious burns. If the acid comes
into contact with eyes, skin or clothing,
flush with large quantities of water. If acid
splashes into the eyes, seek medical attention immediately.
06 Starting and driving
Driving with a trailer
General
The towing bracket on the car must be approved. Your Volvo dealer can advise you as
to which towing bracket to use.
• Distribute the load on the trailer so that the
weight on the towing bracket follows the
specified maximum towball load.
• Increase tyre pressure so that it corresponds to the pressure for full load. See
the tyre pressure table!
• Clean the towing bracket regularly and
grease the towball1 and all moving parts
to prevent unnecessary wear.
• Do not drive with a heavy trailer when your
car is brand new! Wait until it has driven at
least 1000 km.
• The brakes are loaded much more than
usual on long and steep downhill slopes.
Downshift to a lower gear and adjust your
speed.
• If the car is driven with a heavy load in a
hot climate, the engine and gearbox may
overheat. The temperature gauge in the
combined instrument panel goes into the
red zone when the car overheats. Stop
and let the engine idle a few minutes.
• If the car overheats, the air conditioning
system can be temporarily switched off.
• The gearbox reacts with a built-in protection function if the car overheats. See the
message in the display!
• The engine is loaded more heavily than
usual when driving with a trailer.
• For reasons of safety, you should not drive
faster than 80 km/h, even if the laws of
certain countries permit higher speeds.
• If you park with a trailer, always set the
gear selector to P (automatic gearbox) or
engage a gear (manual gearbox). If you
park on a steep hill, put chocks under the
wheels.
• Avoid driving on inclines exceeding 12 %
if the trailer weight exceeds 1200 kg. Do
not drive with a trailer at all on inclines
exceeding 15 %.
Trailer weights
See page 243 for permitted trailer weights.
NOTE
The stated maximum permitted trailer
weights are those permitted by Volvo. National vehicle regulations can further limit
trailer weights and speeds. Towbars can be
certified for higher towing weights than the
car can actually tow.
WARNING
Follow the stated recommendations for
trailer weights. Otherwise, the rig may be
difficult to control during evasive manoeuvres and braking.
06
1 Does
not apply to ball hitch with vibration
damper.
133
06 Starting and driving
Driving with a trailer
Driving with trailer – automatic
gearbox
• When parking on hills, apply the parking
brake before moving the gear selector
to P. When starting on a hill, first put the
gear selector in drive and then release the
parking brake.
• Select a low gear in the gearbox when
driving on steep inclines or when driving
slowly. This prevents the gearbox from
upshifting if you have an automatic gearbox. The gearbox oil will be cooler.
• If you have a Geartronic gearbox, do not
use a higher manual gear than the engine
can "handle". It is not always economical
to drive in high gears.
NOTE
06
134
Some models require an oil cooler for the
automatic gearbox when driving with a trailer. Check with your nearest Volvo dealer as
to what applies to your car if you have a retrofitted towbar.
Levelling
If your car is equipped with automatic levelling, the rear suspension always retains the
correct ride height regardless of load. When
the car is stationary, the rear suspension
sinks. This is completely normal. When starting with a load, the level is pumped up after a
certain distance.
06 Starting and driving
Towing equipment
Towbars
Trailer cable
The towball must be cleaned and greased
regularly. If a towball hitch with vibration
damper is used, it is not necessary to grease
the towball.
If the car is equipped with a detachable towbar, the towball mounting instructions must
be followed carefully, see page 137.
WARNING
Be sure to attach the trailer’s safety cable to
the correct place.
WARNING
If the car is fitted with a Volvo detachable
towbar:
Follow the assembly instructions for the
towball section carefully.
The towball section must be locked with the
key before setting off.
Check that the indicator window shows
green.
An adapter is required if the car’s towbar has
13 pin electrics and the trailer has 7 pin
electrics. Use an adapter cable approved by
Volvo. Make sure the cable does not drag on
the ground.
06
NOTE
Always remove the towball section after
use. Keep it in the cargo area.
135
06 Starting and driving
Towing equipment
Specifications
Dimensions for mounting points (mm)
A
06
Fixed towbar standard
Fixed towbar with Nivomat
136
C
D
E
F
G
83
1058
Detachable towbar standard
Detachable towbar with Nivomat
B
94
1069
305
91
1083
542
122
50
316
100
1
Side member
2
Ball centre
06 Starting and driving
Detachable towbar
Fitting the towball
– Remove the guard plug.
– Ensure that the mechanism is in the unlocked position by turning the key clockwise.
– Check that the indicator window (3) shows
red. If the window does not show red,
press in (1) and turn the locking wheel
anticlockwise (2) until you hear a click.
06
137
06 Starting and driving
Detachable towbar
– Insert the towball section until you hear a
click.
06
138
– Check that the indicator window shows
green.
– Turn the key anticlockwise to the locked
position. Remove the key from the lock.
06 Starting and driving
Detachable towbar
NOTE
Check that the towball section is secure by
pulling it up, down and back. If the towball
section is not fitted correctly then it must be
removed and refitted in accordance with
the previous steps.
NOTE
The trailer’s safety cable must be attached
to the attachment on the towbar.
06
139
06 Starting and driving
Detachable towbar
Removing the towball
– Insert the key and turn it clockwise to the
unlocked position.
06
140
– Push in the locking wheel (1) and turn it
anticlockwise (2) until you hear a click.
– Turn the locking wheel down fully, until it
comes to a stop. Hold it in this position
while pulling the towball rearward and
upward.
06 Starting and driving
Detachable towbar
– Insert the guard plug.
06
141
06 Starting and driving
Load on the roof
General
Using load carriers (accessory)
The load capacity is affected by extra accessories mounted on the car, such as a towbar,
load carriers, space box, the passengers’
combined weight etc. as well as towball load.
The load capacity of the car is reduced by
the number of passengers and their weight.
For information on permitted weights, see
page 243.
WARNING
Load no more than 100 kg on the roof, including the load carriers and any space
box.
The car’s centre of gravity and driving characteristics are altered by roof loads.
WARNING
The car’s driving characteristics change depending on how heavily it is loaded and how
the load is distributed.
06
To avoid damaging your car and to achieve
the best level of safety when driving, we recommend that you only use load carriers that
Volvo has specially designed for your car.
• Check periodically that the load carriers
and load are properly secured. Lash the
load securely with retaining straps.
• Distribute the load evenly over the load
carriers. Do not load lopsidedly. Place the
heaviest items at the bottom.
• Remember that the car’s centre of gravity
and driving characteristics change if you
have a load on the roof.
142
• Keep in mind that the car’s wind resistance and fuel consumption increase in
proportion to the size of the load.
• Drive gently. Avoid quick accelerations,
heavy braking and taking curves hard.
• Remove the load carrier when it is not in
use. This reduces wind resistance and fuel
consumption.
06 Starting and driving
Load on the roof
Fitting load carriers
– Check that the hook is properly secured in
the roof bracket.
– Tighten the knobs alternately until the carrier feels secure.
– Replace the cover.
– Check that the roof rack is properly secured.
NOTE
Check the knobs regularly to see that they
are properly tightened.
– Make sure the load carrier is fitted in the
right direction (see the marking on the
decal under the cover).
– Fit the guide pins into the guide holes (1).
– Carefully lower the bracket on the other
side to the roof.
– Screw the knob up a bit.
– Press the knob against the roof bracket
and catch the hook in the roof bracket
under the roof rail.
– Screw the load carrier in place.
– Fit the guide pins of the other brackets
into the guide holes.
– Screw the load carrier in place.
06
143
06 Starting and driving
Adjusting headlamp pattern
Correct light pattern for right or lefthand traffic
tance from the dot (5) to the corner of the
mask, marked with an arrow.
After copying the templates located on the
next page, check the measurements so that
the reference measurements cover enough
of the beam pattern.
Adjusting headlamp pattern for Active
Bi-Xenon Lights ABL see page 47.
A. Headlamp pattern for left-hand traffic.
B. Headlamp pattern for right-hand traffic.
06
So as not to dazzle oncoming drivers, the
headlamp beam pattern can be altered by
masking the headlamps. The quality of the
beam pattern may not be as good.
Headlamp masking
Copy the templates and transfer the pattern
to a self-adhesive, waterproof material such
as opaque tape or the like.
The mask is positioned using the dot (5) in
the headlamp lens as a reference point. The
reference measurement (X) indicates the dis-
144
06 Starting and driving
Adjusting headlamp pattern
Halogen headlamps
Location of halogen headlamp masks, 1 and 2 = LHD variant, 3 and 4 = RHD variant
LHD variant
RHD variant
Copy templates 1 and 2. Check the measurements to ensure they are correct. Transfer
the template to a self-adhesive, waterproof
material and cut it out.
Copy templates 3 and 4. Check the measurements to ensure they are correct. Transfer
the template to a self-adhesive, waterproof
material and cut it out.
Reference measurements
Template 1. (3) = 70 mm, (4) = 40 mm
Reference measurements
Template 3. (1) = 55 mm, (2) = 41 mm
Distance to dot in headlamp lens:
(5) =13 mm.
Distance to dot in headlamp lens:
(5) = 17 mm.
Template 2. (6) = 55 mm, (7) = 40 mm
Distance to dot in headlamp lens:
(8) = 18 mm.
Template 4. (6) = 70 mm, (7) = 39 mm
06
Distance to dot in headlamp lens:
(8) = 14 mm.
145
06 Starting and driving
Adjusting headlamp pattern
xx
Masking templates for halogen headlamps, LHD variant
06
Masking templates for halogen headlamps, RHD variant
146
06 Starting and driving
Adjusting headlamp pattern
Bi-Xenon headlamps
Location of Bi-Xenon headlamp masks, 1 and 2 = LHD variant, 3 and 4 = RHD variant
LHD variant
RHD variant
Copy templates 1 and 2. Check the measurements to ensure they are correct. Transfer
the template to a self-adhesive, waterproof
material and cut it out.
Copy templates 3 and 4. Check the measurements to ensure they are correct. Transfer
the template to a self-adhesive, waterproof
material and cut it out.
Reference measurements
Template 1. (3) = 56 mm, (4) = 43 mm
Reference measurements
Template 3. (1) = 56 mm, (2) = 42 mm
Distance to dot in headlamp lens:
(5) =29 mm.
Distance to dot in headlamp lens:
(5) = 29 mm.
Template 2. (6) = 56 mm, (7) = 42 mm
Template 4. (6) = 56 mm, (7) = 41 mm
Distance to dot in headlamp lens:
(8) =6 mm.
Distance to dot in headlamp lens:
(8) = 0 mm.
06
147
06 Starting and driving
Adjusting headlamp pattern
Masking templates for Bi-Xenon headlamps, LHD variant
06
Masking templates for Bi-Xenon headlamps, RHD variant
148
06 Starting and driving
BLIS (Blind Spot Information System) – option
NOTE
B
A
1 – BLIS camera, 2 – Indicator lamp,
3 – BLIS symbol
BLIS is an information system which indicates whether there is another vehicle moving in the same direction in the so-called
"blind spot".
WARNING
The system is a supplement to, and not a
replacement for, the existing rearview mirrors. It can never replace the awareness
and responsibility of the driver. The responsibility for changing lanes safely rests with
the driver.
Blind spots covered by BLIS
Distance A = approx. 9.5 m
Distance B = approx. 3 m
The system is designed to work most effectively when driving in dense traffic on multilane highways.
BLIS is based on digital camera technology.
The cameras (1) are fitted under the door mirrors.
When a camera has detected a vehicle inside
the blind spot zone then an indicator lamp is
lit in the door panel (2). The light illuminates
with a constant glow to draw the driver’s attention to a vehicle in the blind spot.
The lamp illuminates on the side of the car
where the system has detected the vehicle.
If the car is overtaken on both sides at the
same time then both lamps illuminate.
BLIS also has an integrated function which
warns the driver if a fault should arise in the
system. If, for example, the system’s cameras are obscured then the BLIS indicator lamp
flashes and a message is shown in the dashboard display (see the table on page 151). In
such cases, check and clean the lenses. If
necessary, the system can be switched off
temporarily by pressing the BLIS button (see
page 151).
When BLIS operates
06
The system operates when the car is driven
at a speed above 10 km/h.
When you overtake another vehicle
The system reacts if you overtake another
vehicle at a speed of up to 10 km/h faster
than the other vehicle.
149
06 Starting and driving
BLIS (Blind Spot Information System) – option
When you are overtaken by another
vehicle
The system reacts if you are overtaken by a
vehicle travelling up to 70 km/h faster than
you are travelling.
WARNING
BLIS does not work in sharp bends.
BLIS does not work when the car is reversing.
A wide trailer coupled to the car can conceal other vehicles in adjacent lanes. It can
prevent the vehicle in the screened area
from being detected by BLIS.
System function in daylight and
darkness
06
Daylight
In daylight the system reacts to the shape of
the surrounding vehicles. The system is designed to detect motor vehicles such as cars,
trucks, buses and motorcycles
Darkness
In darkness the system reacts to the headlamps of surrounding vehicles. If its headlamps are not switched on then the system
does not detect the vehicle. This means for
example that the system does not react to a
150
trailer without headlamps which is towed behind a car or truck.
WARNING
The system does not react to bicycles or
mopeds.
The BLIS cameras can be disrupted by intensive light or when driving in the dark
when there are no light sources (e.g. street
lighting or other vehicles). The system may
then interpret the lack of light as if the cameras have been blocked.
In both cases a message is shown on the
information display.
When driving in such conditions system
performance may be temporarily reduced
(see the information on the next page).
When the text message disappears the system returns to full functionality.
The BLIS cameras have the same limitations as the human eye, i.e. they "see"
worse in heavy snowfall or thick fog for example.
Cleaning
In order to work most effectively the BLIS
camera lenses must be clean. The lenses can
be cleaned with a soft cloth or damp sponge.
Clean the lenses carefully so that they are not
scratched.
IMPORTANT
The lenses are electrically heated to melt ice
or snow. If necessary, brush snow away
from the lenses.
06 Starting and driving
BLIS (Blind Spot Information System) – option
Switching off and reactivating BLIS
• BLIS is activated automatically each time
the ignition is switched on. The indicator
lamps in the door panels flash three times
when the ignition is switched on.
• The system can be switched off by pressing the BLIS button in the switch panel in
the centre console (see illustration above).
The LED in the button goes out when the
system is switched off and a text message
is shown in the display in the dashboard.
• BLIS can be reactivated by pressing the
button. An LED in the button then illuminates, a new text message is shown in the
display and the indicator lamps in the door
panels flash three times. Press the READ
button, see page 44, to clear the text
message.
BLIS system messages
System status
Text in the display
BLIS not
functioning
BLIND-SPOT SYST
SERVICE
REQUIRED
Right-hand camera
blocked
BLIND-SPOT SYST
R CAMERA
BLOCKED
Left-hand camera
blocked
BLIND-SPOT SYST
L CAMERA
BLOCKED
Both cameras
blocked
BLIND-SPOT SYST
CAMERAS
BLOCKED
BLIS system off
BLIND-SPOT INFO
SYSTEM OFF
BLIS system on
BLIND-SPOT INFO
SYSTEM ON
BLIS function
reduced
BLIS
FUNCTION
REDUCED
06
The messages above are only shown if the
ignition key is in position II (or if the engine is
running) and BLIS is active (i.e. if the driver
has not switched off the system).
151
General ................................................................................................... 154
Tyre pressure .......................................................................................... 157
Warning triangle and spare wheel .......................................................... 159
Tyre pressure monitoring (option) .......................................................... 161
Changing wheels .................................................................................... 163
152
WHEELS AND TYRES
07
07 Wheels and tyres
General
Driving characteristics and tyres
Speed ratings
New tyres
The tyres greatly affect the car’s driving characteristics. The type of tyre, dimensions, tyre
pressure and speed rating are important for
how the car performs.
The car has "Whole Vehicle Type Approval",
which means that dimensions and speed ratings must not differ from those specified on
the vehicle’s registration document. The only
exception to these conditions is winter tyres
(both those with studs and those without). If
such a tyre is chosen, the car must not be
driven faster than the speed rating of the tyre
(for example, class Q can be driven at a maximum of 160 km/h).
Tyres are perishable. After a
few years they begin to
harden at the same time as
the friction capacity/characteristics gradually deteriorate. Therefore aim to get
as fresh tyres as possible
when you replace them. This is especially important with regard to winter tyres. The week
and year of manufacture, the tyre’s DOT
marking (Department of Transportation), are
stated with four digits, for example 1502. The
tyre in the illustration was manufactured in
week 15 of 2002.
When changing tyres, ensure that tyres of the
same type and dimensions, and preferably
also the same make, are fitted to all four
wheels. Follow the recommended tyre pressures specified on the tyre pressure label,
see page 157.
Designation of dimensions
The dimensions are stated on all car tyres.
Example: 205/55R16 91 W.
205
55
R
16
91
W
07
Section width (mm)
Ratio between section height and
width (%)
Radial ply
Rim diameter in inches (")
Tyre load index (in this case 615 kg)
Speed rating (in this case 270 km/h).
Remember that traffic regulations determine
how fast a car can be driven, not the speed
class of the tyres.
Note! Maximum permitted speeds indicated.
Q
T
H
V
W
Y
160 km/h (used only on winter tyres)
190 km/h
210 km/h
240 km/h
270 km/h
300 km/h
Tyre age
All tyres older than six years should be
checked by an expert even if they seem undamaged. The reason for this is that tyres
age and decompose, even if they are hardly
ever or never used. The function can therefore be affected due to the tyre’s constituent
materials being broken down. In such a case
the tyre should then not be used. This also
applies to spare tyres, winter tyres and tyres
saved for future use. Examples of external
signs which indicate that the tyre is unsuitable for use are cracks or discoloration.
The age of the tyre can be determined by the
DOT marking, see illustration above.
154
07 Wheels and tyres
General
More even wear and maintenance
WARNING
A damaged tyre can lead to loss of control
of the car.
Tyres with tread wear indicators
Tread wear indicators are narrow treadless
bands across the width of the tread. On the
side of the tyre are the letters TWI (Tread
Wear Indicator). When the tyre’s tread depth
is down to 1.6 mm, the tread depth will be
level in height with the tread wear indicators.
Change to new tyres as soon as possible.
Remember that tyres with little tread depth
provide very poor grip in rain and snow.
The correct tyre pressure results in more
even wear, see page 158. To achieve the
best traction and more even wear on the
tyres, the regular switching of the front and
rear tyres with each other is recommended.
The first change should be after 5000 km and
then at intervals of 10000 km, this is to avoid
differences in tread depth. Tyres with the
greatest tread depth should always be fitted
to the rear wheels to decrease the risk of
skidding. Contact an authorised Volvo workshop if you are uncertain about tread depth.
Wheels should be stored lying down or hanging up, and not standing up.
Winter tyres
Volvo recommends winter tyres with particular dimensions. These are stated on the tyre
pressure label, see page 157 for its location.
The tyre dimensions are dependent on the
engine variant. When driving on winter tyres,
these must be fitted to all four wheels.
NOTE
Ask a Volvo dealer which rim and tyre types
are most suitable.
Studded tyres
Studded winter tyres should be run in gently
for 500–1000 km so the studs settle properly
into the tyre. This gives the tyre, and especially the studs, a longer lifespan.
NOTE
The legal provisions for the use of studded
tyres vary from country to country.
Tread depth
Road conditions with ice, slush and low temperatures place considerably higher demands on tyres than summer conditions. It is
therefore not recommended to drive on winter tyres that have a tread depth of less than
four mm.
Snow chains
Snow chains may only be used on the front
wheels. This also applies to all-wheel-drive
cars.
Never drive faster than 50 km/h with snow
chains. Avoid driving on bare ground as this
wears out both the snow chains and tyres.
Never use quick-fit snow chains as the space
between the brake discs and the wheels is
too small.
07
155
07 Wheels and tyres
General
IMPORTANT
Summer and winter wheels
Use Volvo genuine snow chains or equivalent chains designed for the correct car
model, and tyre and rim dimensions. Consult an authorised Volvo workshop
Tyres with the greatest tread depth should always be fitted to the rear of the car (to decrease the risk of skidding).
Locking wheel bolts
Locking wheel bolts can be used on both aluminium and steel rims. If steel rims with locking wheel bolts are used in combination with
wheel covers then the locking wheel bolts
must be fitted furthest from the air valve.
Otherwise the wheel cover cannot be fitted
on the rim.
Wheels should be stored lying down or hanging up, and not standing up.
Contact an authorised Volvo workshop if you
are uncertain about tread depth.
The arrow shows the tyre’s direction of rotation
When summer and winter wheels are
changed the wheels should be marked with
which side of the car they were mounted on,
for example L for left and R for right.
07
Tyres with tread patterns which are designed
to only rotate in one direction have the direction of rotation marked with an arrow on the
tyre. The tyre should always rotate in the
same direction throughout its lifespan.
Tyres should only be switched between front
and rear positions, never between left and
right-hand sides, or vice versa. If the tyre is
mounted incorrectly, the car’s braking char-
156
acteristics and capacity to force rain, snow
and slush out of the way are adversely affected.
07 Wheels and tyres
Tyre pressure
Recommended tyre pressure
Checking the tyre pressure
Check the tyre pressure regularly.
NOTE
Tyre pressure decreases over time, this is a
natural phenomenon. Tyre pressure also
varies depending on ambient temperature.
Fuel economy, ECO pressure
At speeds under 160 km/h, the general tyre
pressure for full load is recommended in order to obtain optimum fuel economy.
Tyre pressure affects travelling comfort, road
noise and steering characteristics.
The correct tyre pressure is specified in the
tyre pressure table on page 158. The specified tyre pressures refer to "cold tyres".
("Cold tyres" means the tyres are the same
temperature as the ambient temperature.)
The tyre pressure decal on the driver’s side
door pillar (between frame and rear door)
shows which pressures the tyres should have
at different loads and speed conditions.
Stated on the decal:
• Tyre pressure for the car’s recommended
wheel size
• ECO pressure
• Spare wheel pressure (Temporary Spare).
Even after several kilometres of driving the
tyres warm up and the pressure increases, so
air must not be released if the pressure is
checked when the tyres are warm, while the
pressure must be increased if it is too low.
Inadequately inflated tyres adversely affect
fuel consumption, tyre lifespan and the car’s
roadholding. Driving on tyres with tyre pressure that is too low can also result in the tyres
overheating and disintegrating. For information on the correct tyre pressure, refer to the
tyre pressure table.
07
157
07 Wheels and tyres
Tyre pressure
Tyre pressure table
Variant
Tyre size
Speed
(km/h)
T5
215/55R16
235/40R18
225/45R17
0 – 160
160 +
0 – 160
205/55R16
235/45R17
235/40R18
160 +
0 – 250
0 – 160
195/65R15
205/55R16
215/55R16
225/45R17
235/40R18
S60R
Miscellaneous
Spare wheel,
Temp. spare
1
07
158
Max. load
Front (kPa) Rear (kPa)
220
260
220
260
260
280
260
280
2601
250
240
2601
250
240
2601
280
270
2601
280
270
0 –160
160 +
2701
220
250
2701
220
250
2701
260
280
2701
260
280
0 –160
2601
2601
2601
2601
T115/85R182
0 – 80
420
420
420
420
T125/80R17
0 – 80
420
420
420
420
ECO pressure, see page 157
2 R-models
Load, 1-3 persons
Front (kPa) Rear (kPa)
07 Wheels and tyres
Warning triangle and spare wheel
Warning triangle (certain countries)
After use
Pack everything in reverse order.
Spare wheel, tools and jack
4
Make sure the warning triangle and its case
are properly secured in the boot lid.
3
2
1
Follow the warning triangle regulations of the
country you are in.
Use the warning triangle as follows:
– Turn both attachment screws to the vertical position.
– Carefully remove the warning triangle
case.
– Remove the warning triangle from its
case (A).
– Fold out the four support legs on the
warning triangle.
– Fold out both red sides of the warning
triangle. Place the warning triangle in a
location that is appropriate for the traffic
situation.
1. Spare wheel1
2. Mounting
3. Tool kit1 with towing eye
4. Jack1
The spare wheel and jack and tool kit are located under the floor of the cargo area. Remove the spare wheel as follows:
07
– Fold the rear edge of the floor mat forward.
– Remove the jack and tool kit.
– Unscrew the spare wheel and lift it out.
1
Option for certain variants and markets
159
07 Wheels and tyres
Warning triangle and spare wheel
If the car is equipped with a carrier bag
holder:
– Turn the two clips located at the rear
corner of the mat 90 degrees.
– Pull the front of the floor mat back towards
the boot lid opening.
– Lift the mat slightly and turn 90 degress to
lift it out.
– Lift the mat out of the cargo area.
– Unscrew the spare wheel and lift it out.
Return and secure everything in reverse order. Make sure that the spare wheel is securely in place and that the jack and tool kit
are properly secured.
Spare wheel, "Temporary spare"
The spare wheel1 "Temporary Spare" should
only be used for the short time it takes to repair or replace the normal tyre.
By law, it is only legal to use the spare wheel/
tyre temporarily in connection with damage
to a tyre. A wheel/tyre of this type should be
replaced with a normal wheel/tyre as soon as
possible.
Remember also that this tyre combined
with the normal tyres will affect driving characteristics. The maximum speed with the
"Temporary Spare" - spare wheel is
therefore 80 km/h.
IMPORTANT
Only use the car’s own genuine spare
wheel! Tyres with other dimensions may
cause damage to your car. Only one spare
wheel may be used at a time.
07
1
160
Option for certain variants and markets
07 Wheels and tyres
Tyre pressure monitoring (option)
Tyre pressure monitoring TPMS
The Tyre Pressure Monitoring System warns
the driver when the pressure is too low in one
or more of the car’s tyres. It uses sensors located inside the air valve in each wheel.
When the car is driven at approximately
40 km/h the system detects the tyre pressure. If the pressure is too low then a warning
lamp on the dashboard illuminates and a
message is shown in the information display.
Always check the system after changing a
wheel in order to ensure that replacement
wheels work with the system.
For information on correct tyre pressure, see
page 157 –158.
The system does not replace normal tyre
maintenance.
IMPORTANT
If a fault should arise in the tyre pressure
system a warning lamp on the dashboard
will illuminate. The message TYRE PRESS.
SYST SERVICE REQUIRED will be shown.
This can be for various reasons, e.g. fitting a
wheel not equipped with a sensor adapted
for Volvo’s tyre pressure monitoring system.
Adjusting tyre pressure monitoring
Tyre pressure monitoring can be adjusted in
order to follow Volvo’s tyre pressure recommendations, when driving with a heavy load
for example.
NOTE
The engine must not be running.
– Inflate the tyres to the required pressure.
– Select key position I or II.
– Turn the thumbwheel on the left-hand
stalk switch until the text TYRE
PRESSURE CALIBRATION is shown in
the information display.
– Press and hold the RESET button until the
text TYRE PRESSURE CALIBRATED is
shown.
Rectifying low tyre pressure
When the message LOW TYRE PRESS.
CHECK TYRES is shown in the information
display:
– Check the tyre pressure in all four tyres.
– Inflate the tyre(s) to the correct pressure.
– Drive the car for at least 1 minute in total
at at least 40 km/h and check that the
message disappears.
Deactivating tyre pressure monitoring
NOTE
The engine must not be running.
– Key position I or II.
– Turn the thumbwheel on the left-hand
stalk switch until the text TYRE PRESS.
SYST ON is shown in the information display.
– Press and hold the RESET button until the
text TYRE PRESS. SYST OFF is shown.
To reactivate the system repeat the same
steps 1–3, so that TYRE PRESS. SYST ON is
shown in the information display.
Recommendations
Only factory fitted wheels are equipped with
TPMS sensors in the valves.
• The temporary spare wheel does not have
this sensor.
• If wheels without TPMS sensors are used
then TYRE PRESS. SYST SERVICE
REQUIRED will be shown every time the
car is driven faster than 40 km/h for more
than 10 minutes.
• Volvo recommends that TPMS sensors
are fitted to all wheels on the car (summer
and winter wheels).
07
161
07 Wheels and tyres
Tyre pressure monitoring (option)
• Volvo recommends that sensors are not
moved between different wheels.
WARNING
When inflating a tyre equipped with TPMS,
hold the nozzle of the pump directly against
the valve to avoid damaging the valve.
Driveable punctured tyres (option)
If the car has Self Supporting run flat Tyres
(SST) then it is also equipped with TPMS.
This type of tyre has a specially reinforced
side wall that makes continued driving possible despite the tyre losing some air. These
tyres are fitted on a special rim. (Normal tyres
can also be fitted to this rim).
If an SST tyre loses tyre pressure then the
yellow TPMS lamp on the instrument panel illuminates and a message is shown in the text
panel. If this occurs, reduce speed to max.
80 km/h. The tyre must be replaced as soon
as possible.
Drive carefully, in some cases it can be difficult to see which tyre is faulty. In order to establish which tyre needs attention, check all
four tyres.
07
162
WARNING
SST tyres should only be fitted by individuals with expertise on SST tyres.
SST tyres must only be fitted together with
TPMS.
After a fault message on low tyre pressure
has been shown, do not drive faster
than 80 km/h.
Maximum driving distance to tyre change
is 80 km.
Avoid hard driving.
SST tyres must be replaced if they are damaged or punctured.
07 Wheels and tyres
Changing wheels
Removing wheels
Remember to set out the warning triangle if
you must change a wheel in a trafficked area.
The spare wheel is under the plastic trough in
the cargo area.
– Apply the parking brake and engage 1st
gear on cars with manual gearbox –
position P on cars with automatic gearbox.
– Place chocks in front of and behind the
wheels which will remain on the ground.
Use heavy wooden blocks or large stones.
– Cars with steel wheel rims have removable
wheel covers. Prise off the wheel cover
with a thick screwdriver or the like. If tools
are not available, the wheel cover can be
prised off by hand. Use protective gloves.
When refitting the wheel cover, make sure
the cover is properly aligned over the air
valve.
– Loosen the wheel bolts 1/2-1 with the
socket wrench. Loosen the nuts by turning
them anticlockwise.
– There are two jacking points on each side
of the car.
Hold the jack against the pin in the jacking
point as illustrated and crank the foot of
the jack down so it is pressed squarely on
the ground.
Check that the jack sits in the anchorage
as illustrated and that the foot is positioned vertically under the anchorage.
– Lift the car so that the wheel is free.
– Remove the wheel bolts and lift off the
wheel.
07
163
07 Wheels and tyres
Changing wheels
Fitting the wheel
IMPORTANT
If TPMS is specified then the tyres must be
calibrated after fitting. Read "Adjusting tyre
pressure", see page 161.
07
164
– Clean the contract surfaces on the wheel
and hub.
– Fit the wheel. Screw the wheel nuts.
– Lower the car so that the wheel cannot
rotate.
– Tighten the wheel nuts crosswise. It is
important that the wheel nuts are tightened properly. Tighten to 140 Nm. Check
the torque with a torque wrench.
– Put on the wheel cover (steel rim).
Certain variants.
WARNING
Never crawl under the car when it is raised
on the jack.
Passengers must leave the car when it is
raised on the jack.
Ensure that passengers wait with the car or preferably a crash barrier - between them
and the road.
07 Wheels and tyres
07
165
Cleaning ................................................................................................. 168
Touching up paintwork ........................................................................... 171
Rustproofing .......................................................................................... 172
166
CAR CARE
08
08 Car care
Cleaning
Washing the car
Wash the car as soon as it becomes dirty.
Use car shampoo. Dirt and road salt can lead
to corrosion.
• Do not park the car in direct sunshine.
Washing a car with hot paintwork can
cause permanent paintwork damage.
Wash the car in a car wash with waste
water separator.
• Thoroughly rinse dirt off the underbody of
the car.
• Rinse the entire car to remove loose dirt.
When using a pressure washer: Make sure
that the nozzle of the pressure washer is
not closer than 30 cm to the bodywork. Do
not spray directly at the locks.
• Wash using a sponge, car shampoo and
plenty of lukewarm water.
• If the dirt is difficult to dislodge, wash the
car using a cold degreasing agent.
• Dry the car using a clean, soft chamois or
a water scraper.
• Clean the wiper blades with a lukewarm
soap solution or car shampoo.
WARNING
08
168
Always have the engine cleaned by a workshop. There is a risk of fire if the engine is
hot.
NOTE
Outside lighting such as headlamps, fog
lamps and rear lamps may temporarily have
condensation on the inside of the lens. This
is a natural phenomenon, all outside lighting
is designed to withstand this. Condensation
is normally vented out of the lamp when it
has been switched on for a time.
Removing bird droppings
Wash bird droppings off the paintwork as
soon as possible. Bird droppings contain
chemicals that affect and discolour paintwork very quickly. This discoloration can only
be removed by a specialist.
Chromed wheels
IMPORTANT
Rim cleaning agents can cause stains on
chrome-plated wheels. Wash using a
sponge, car shampoo and plenty of lukewarm water.
Automatic car washes
An automatic car wash is a simple and quick
way of washing the car, but it can never replace a proper handwashing. The brushes of
an automatic car wash cannot reach
everywhere.
WARNING
Always test the brakes after washing the car
to ensure that moisture and corrosion do
not attack the brake pads and reduce braking performance.
IMPORTANT
Washing by hand is gentler to the paintwork
than an automatic car wash. Paintwork is
also more sensitive when it is new. For this
reason, handwashing is recommended during the first few months with a new car.
Press the brake pedal lightly from time to
time if driving for long periods in rain or slush.
This heats and dries the brake pads. You
should also do this when you begin driving in
extremely damp or cold weather.
Exterior plastic parts
A special cleaning agent, available from Volvo dealers, is recommended for cleaning exterior plastic parts. Never use strong stain removers.
08 Car care
Cleaning
Polishing and waxing
Polish and wax the car if the paintwork is dull
or to give the paintwork extra protection.
The car does not need to be polished until it
is at least one year old. However, the car can
be waxed during this time. Do not polish or
wax the car in direct sunlight.
Wash and dry the car thoroughly before you
begin polishing or waxing. Clean off asphalt
and tar stains using Volvo tar remover or
white spirit. More stubborn marks can be removed using fine rubbing paste designed for
car paintwork.
Polish first with a polish and then wax with
liquid or solid wax. Follow the instructions on
the packaging carefully. Many preparations
contain both polish and wax.
IMPORTANT
Paint treatment such as preserving, sealing,
protection, lustre sealing or similar could
damage the paintwork. Paintwork damage
caused by such treatment is not covered by
Volvo warranty.
Cleaning door mirrors with waterrepellent surface (option)
Cleaning the interior
Never use products such as car wax, degreaser or similar on mirror surfaces as this
could ruin their water-repellent properties.
Treating stains on fabric upholstery
A special cleaning agent, available from Volvo dealers, is recommended for cleaning the
fabric upholstery. Other chemicals can impair
the fire retardant qualities of the upholstery.
Take care when cleaning so as not to damage the glass surface.
To avoid damaging glass surfaces when removing ice – only use plastic ice scrapers.
There is natural wear of the water-repellent
coating.
Treatment with a special finishing agent
available from Volvo dealers is recommended in order to maintain the water-repellent
properties. This should first be used after
three years and then each year.
IMPORTANT
Sharp objects and Velcro may damage the
fabric upholstery.
Treating stains on leather upholstery
Volvo’s leather upholstery is equipped with
surface protection against dirt. Cleaning reprotects the leather but grease and dirt dissolves the surface protection. There is a
comprehensive programme for the care and
maintenance of leather upholstery. Volvo offers a leather product for cleaning and treating the upholstery by which means the leather regains its protective layer.
IMPORTANT
Never use strong solvents. Such products
may damage fabric, vinyl and leather upholstery.
08
169
08 Car care
Cleaning
IMPORTANT
Note that materials with colour that runs
when dry (new jeans, suede garments etc.)
may discolour the upholstery material.
To achieve best results Volvo recommends
cleaning and application of the protective
cream two to four times per year.
Ask your Volvo dealer about Volvo’s Leather
care product
08
170
Washing instructions for leather
upholstery
– Pour the leather cleaner on the dampened
sponge and squeeze out a strong foam.
– Work the dirt away with gentle circular
movements.
– Dab the sponge accurately on the stains.
Allow the sponge to absorb the stain. Do
not rub.
– Wipe off with soft paper or a cloth and
allow the leather to dry completely.
Protective treatment of leather upholstery
– Pour a small amount of the protective
cream on the felted cloth and massage in
a thin layer of cream with gentle circular
movements on the leather.
– Now allow the leather to dry for
20 minutes before use.
The leather has now been given improved
protection against stains and a UV filter.
Treating spots on interior plastic parts
and surfaces
A special cleaning agent, available from Volvo dealers, is recommended for cleaning interior plastic parts and surfaces. Do not
scrape or rub spots. Never use strong stain
removers.
Cleaning seatbelts
Use water and a synthetic detergent. A special textile cleaning agent is available from
you Volvo dealer. Make sure the seatbelt is
dry before allowing it to retract.
08 Car care
Touching up paintwork
Paintwork
Stone chips and scratches
Paint is an important part of the car’s rustproofing and should therefore be checked
regularly. To avoid the onset of rust, damaged paintwork must be rectified immediately. The most common types of paintwork
damage are stone chips, scratches, and
marks on the edges of wings and doors.
Colour code
If the stone chip has penetrated to the
bare metal
– Fasten a piece of masking tape over the
damaged surface. Then remove the tape,
removing any paint residue.
– Stir the primer well and apply using a fine
brush or matchstick. Apply paint using a
brush once the primer is dry.
– For scratches, proceed as above, but
mask around the damaged area to protect
the undamaged paintwork.
– After a few days, polish the touched-up
areas. Use a soft rag and a small amount
of lapping paste.
Before touching up paintwork, the car must
be clean and dry and at a temperature
above 15 °C.
Data plate
It is important that the correct colour is used.
The colour code number (1) is shown on the
data plate, see page 242.
Materials
• Primer in a can
• Paint in a can or touch-up pen
• Brush
• Masking tape.
Minor stone chips and scratches
If the stone chip has not penetrated to the
bare metal and there is an undamaged colour
coat, you can paint straight after cleaning the
damaged area.
08
171
08 Car care
Rustproofing
Inspection and maintenance
Your car received a thorough and complete
rustproofing at the factory. Parts of the body
are made of galvanised sheet metal. The underbody is protected by a wear-resistant
anti-corrosion compound. And, a thin, penetrating rustproofing fluid was sprayed into the
members, cavities and closed sections.
Maintaining the car’s rustproofing.
• Keep the car clean. Hose down the underbody. If using a pressure washer, keep the
nozzle at least 30 cm from the painted
surfaces.
• Regularly check and touch-up the rustproofing treatment as necessary.
The car’s rustproofing does not normally require treatment for approximately12 years.
After that time, it should be treated at three
year intervals. If the car requires treatment,
consult an authorised Volvo workshop.
08
172
08 Car care
08
173
Volvo service .......................................................................................... 176
Self-maintenance ................................................................................... 177
Bonnet and engine compartment .......................................................... 178
Diesel ..................................................................................................... 179
Oils and fluids ........................................................................................ 180
Wiper blades .......................................................................................... 184
Battery ................................................................................................... 185
Replacing bulbs ..................................................................................... 188
Fuses ...................................................................................................... 195
174
MAINTENANCE AND SERVICE
09
09 Maintenance and service
09
Volvo service
Volvo service programme
Installing accessories
Before the car left the factory, it was thoroughly test driven. It was checked again in
accordance with Volvo Car Corporation regulations before it was handed over to you.
The incorrect connection and installation of
accessories can negatively affect the car’s
electrical system. Certain accessories only
function when the appropriate software has
been programmed into the car’s electrical
system. Always contact an authorised Volvo
workshop before installing accessories
which are connected to or affect the electrical system.
To keep your Volvo as safe and reliable as
possible, follow the Volvo service programme specified in the Service and Warranty Booklet. Have an authorised Volvo workshop carry out service and maintenance
work. Volvo workshops have the personnel,
special tools and service literature to guarantee the highest quality of service.
IMPORTANT
For the Volvo warranty to apply, check and
follow the instructions in the Service and
Warranty Booklet.
Special service measures
Certain service measures, which affect the
car’s electrical system, can only be performed using electronic equipment specially
developed for your car. Always contact an
authorised Volvo workshop before beginning
or performing service work that affects the
electrical system.
176
Recording vehicle data
One or more of the computers in your Volvo
are capable of recording detailed information. This information is intended for use in
research to enhance safety and for diagnosing faults in some of the in-car systems. The
data may include details regarding seatbelt
use by the driver and passengers, the functions of various vehicle systems and modules, and status information about the engine, throttle, steering, brakes and other systems. This data can also include details of
the way the car is driven. This type of information can include, without being limited to,
specific details such as vehicle speed, the
use of the brake and accelerator pedals and
steering wheel position. This latter type of
data can be stored for a limited period while
the car is being driven and subsequently during a collision or a near-collision. Volvo Car
Corporation will not disclose the stored information without consent. However, Volvo Car
Corporation may be forced to disclose the information due to national legislation. Volvo
Car Corporation and authorised Volvo workshops may also read and use the information.
09 Maintenance and service
Self-maintenance
Before starting work on the car
Lifting the car
Never disconnect the battery when the engine is running (e.g. if replacing the battery).
Never use a quick charger to charge the battery. The battery cables must be disconnected when charging the battery.
WARNING
The car ignition system has very high voltage!
The voltage in the ignition system is dangerous!
Do not touch spark plugs, ignition cables or
the ignition coil when the engine is running
or the ignition is switched on!
The ignition should be switched off when:
• Conducting engine tests.
• Replacing parts in the ignition system, such
as spark plugs, ignition coil, distributor,
ignition cables, etc.
Check regularly
Check the following at regular intervals, for
example, when refuelling:
Battery
Check that the battery cables are correctly
connected and tightened.
The battery contains acid that is both corrosive and toxic. Handle the battery in an environmentally-suitable way. Let your Volvo
dealer assist you.
09
If the car is lifted with a workshop jack, it
should sit with the front edge on the engine
support arm. Do not damage the splashguard under the engine. Ensure that the jack
is positioned so that the car cannot slide off
the jack. Always use axle stands or the like.
If you raise the car using a two pillar workshop lift, ensure that the front and rear lift
arms are fixed under the lifting points on the
door sill. See the illustration.
• Coolant – The level must be between the
MIN and MAX marks on the expansion
tank.
• Engine oil – The level must be between the
MIN and MAX marks.
• Power steering fluid – The level must be
between the MIN and MAX marks.
• Washer fluid – The reservoir should be well
filled. Use washer antifreeze at temperatures around freezing.
• Brake and clutch fluid – The level must be
between the MIN and MAX marks.
WARNING
Bear in mind that the radiator fan may start
automatically some time after the engine
has been switched off.
Always have the engine cleaned by a workshop. There is a risk of fire if the engine is
hot.
177
09 Maintenance and service
09
Bonnet and engine compartment
Opening the bonnet
Left and right-hand drive cars.
To open the bonnet:
Engine compartment
– Pull the handle on the far left under the
dashboard. You will hear when the catch
releases.
– Insert your hand under the centre of the
front edge of the bonnet and press the
safety catch to the right.
– Open the bonnet.
The appearance of the engine compartment
may vary slightly due to engine variant. However, the components listed are in the same
positions.
WARNING
Check that the bonnet locks properly when
closed.
178
1.
2.
3.
4.
5.
6.
Expansion tank, cooling system
Power steering fluid reservoir.
Washer fluid reservoir
Engine oil dipstick
Radiator
Radiator fan
7. Engine oil filler pipe
8. a) Clutch/brake fluid reservoir
(left-hand drive car).
b) Clutch/brake fluid reservoir
(right-hand drive car).
9. Relay/fuse box.
10. Air filter. (The cover has a different
design depending on engine variant.)
11. Battery (in cargo area)
09 Maintenance and service
Diesel
Fuel system
Diesel must fulfil the EN 590 or JIS K2204
standards. Diesel engines are sensitive to
contaminants such as high volumes of sulphur particles for example. Only use diesel
fuel from a well-known producers. Never use
diesel of dubious quality.
At low temperatures (–40 °C to –6 °C), a
paraffin precipitate may form in the diesel fuel, which can lead to ignition problems. Special diesel fuel designed for low temperatures
around freezing point is available from the
major oil companies. This fuel is less viscous
at low temperatures and reduces the risk of
paraffin precipitate.
The risk of condensation in the fuel tank is reduced if the tank is kept well filled. When refuelling, check that the area around the fuel
filler pipe is clean. Avoid spilling fuel onto the
paintwork. Wash off any spillage with detergent and water.
IMPORTANT
Diesel type fuels which must not be used:
special additives, Marine Diesel Fuel, fuel
oil, RME (Rape Methyl Ester) and vegetable
oil. These fuels do not fulfil the requirements
in accordance with Volvo recommendations
and generate increased wear and engine
damage that is not covered by the Volvo
warranty.
09
IMPORTANT
For model year 2006 or later the sulphur
content must be a maximum of 50 ppm.
Empty tank
No special procedures are required if the
tank is run dry. The fuel system is bled automatically if the ignition switch is kept in
position II for approx. 60 seconds before the
start attempt.
Draining condensation from the fuel
filter
The fuel filter separates condensation from
the fuel. Condensation can disrupt engine
operation.
The fuel filter must be drained at the intervals
specified in the Service and Warranty Booklet or if you suspect that the car has been
filled with contaminated fuel.
IMPORTANT
Certain special additives remove the water
separation in the fuel filter.
179
09 Maintenance and service
09
Oils and fluids
Engine compartment decal for oil
grade
a higher grade than that specified on the decal for adverse driving conditions. See
page 247.
Adverse driving conditions
Check the oil level more frequently for long
journeys:
•
•
•
•
towing a caravan or trailer.
in mountainous regions.
at high speeds.
in temperatures colder than –30 °C or
hotter than +40 °C.
• shorter driving distances (shorter than
10 km) at low temperatures (under 5 °C)
This may result in abnormally high oil temperature or oil consumption.
IMPORTANT
Always use oil of the prescribed grade, see
the engine compartment decal.
Check the oil level frequently and change
the oil regularly.
The engine will be damaged if lower grade
oil is used or if the car is driven with the oil
level too low.
Volvo recommends
oil products.
Using oil of a higher than specified grade is
permitted. Volvo recommends using an oil of
180
Checking and changing the engine oil
and oil filter
Change the oil and oil filter in accordance
with the intervals specified in the Service and
Warranty Booklet.
IMPORTANT
When filling oil to top up a low oil level, the
oil being filled must be of the same grade
and viscosity as the oil in the engine.
IMPORTANT
In order to fulfil the requirements for the engine’s service intervals all engines are filled
with a specially adapted synthetic engine oil
at the factory. The choice of oil has been
made very carefully with regard to service
life, starting characteristics, fuel consumption and environmental impact.
An approved engine oil must be used in
order that the recommended service intervals can be applied.
Only use a prescribed grade of oil (see the
engine compartment decal) for both filling
and oil change, otherwise you will risk affecting service life, starting characteristics,
fuel consumption and environmental impact.
Volvo Car Corporation disclaims all warranty liability if engine oil of the prescribed
grade and viscosity is not used.
Volvo uses different systems for warning of
low oil level or low oil pressure. Certain variants have an oil pressure sensor, and then a
lamp is used for oil pressure. Other variants
have an oil level sensor, and then the driver is
informed via the warning symbol in the centre
of the instrument unit as well as by display
texts.
09 Maintenance and service
Oils and fluids
Certain models have both variants. Contact
an authorised Volvo dealer for more information.
Checking the oil
Checking the oil level in a new car is especially important before the first scheduled oil
change. The Service and Warranty Booklet
specifies the odometer readings for oil
changes.
Volvo recommends checking the oil level
every 2 500 km. The most accurate measurements are made on a cold engine before
starting. The measurement will be inaccurate
if taken immediately after the engine is
switched off. The dipstick will indicate that
the level is too low because the oil has not
had time to flow down into the oil sump.
The oil level must be within the area marked on
the dipstick
Checking the oil in a cold engine:
– Wipe the dipstick clean before checking
the level.
– Check the oil level using the dipstick. The
oil level must be between the MIN and
MAX marks.
If the level is close to the MIN mark, start by
topping up with 0.5 litres of oil. Top up until
the oil level is nearer the MAX than the MIN
mark on the dipstick. See page 246–247 for
capacities.
09
Checking the oil in a warm engine:
– Park the car on a level surface, switch off
the engine and wait 10–15 minutes to
allow the oil time to run back to the sump.
– Wipe the dipstick clean before checking
the level.
– Check the oil level using the dipstick. The
oil level must be between the MIN and
MAX marks.
If the level is close to the MIN mark, start by
topping up with 0.5 litres of oil. Top up until
the oil level is nearer the MAX than the MIN
mark on the dipstick. See page 246–247 for
capacities.
WARNING
Do not spill oil onto the hot exhaust manifold due to the risk of fire.
IMPORTANT
Never fill above the MAX mark. Oil consumption may increase if too much oil is
poured into the engine.
181
09 Maintenance and service
09
Oils and fluids
Washer fluid reservoir
Coolant
IMPORTANT
Always use coolant with anti-corrosion agent
as recommended by Volvo. New cars are
filled with coolant that can withstand temperatures down to approximately –35 °C.
The engine must only be run with a wellfilled cooling system. High temperatures
can occur, causing a risk of damage
(cracks) to the cylinder head.
WARNING
Coolant reservoir.
Washer fluid reservoir
The windscreen and headlamp washers have
the same fluid reservoir. See capacities and
recommended grade for fluids on page 249.
Use washer fluid during the winter so that the
fluid does not freeze in the pump, reservoir
and hoses.
Tip: clean the wiper blades when topping up
washer fluid.
182
Check the coolant regularly. The level should
lie between the MIN and MAX marks on the
expansion tank. Top up with fluid when the
level has fallen to the MIN mark.
See capacities and recommended grade for
fluids and oils on page 249.
When topping up the coolant, follow the instructions on the packaging. It is important
that the mixture of coolant concentrate and
water is correct for the prevailing weather
conditions. Never top up with water only. The
risk of freezing increases with both too little
and too much coolant concentrate.
The coolant may be very hot. If the coolant
requires topping up when the engine is at
operating temperature, unscrew the expansion tank cap slowly to gently release the
overpressure.
09 Maintenance and service
Oils and fluids
Clutch and brake fluid reservoir
WARNING
09
Power steering fluid reservoir
If the brake fluid is under the MIN level in
the brake fluid reservoir, do not drive further
before topping up the brake fluid.
The reason for the loss of brake fluid must
be investigated.
Location dependent on whether car is left or
right-hand drive.
The brake and clutch fluid have a common
reservoir. The fluid level must be between the
MIN and MAX marks. Check the level regularly. Change the brake fluid every other year
or at every other regular service.
See capacities and recommended grade for
fluids and oils on page 249.
NOTE
The fluid should be changed annually on
cars driven in conditions requiring hard, frequent braking, such as driving in mountains
or tropical climates with high humidity.
Check the level at every service. It is not necessary to change the fluid. The level should
lie between the ADD and FULL marks.
See capacities and recommended grade for
fluids and oils on page 249.
NOTE
It is possible to steer if a fault should occur
in the power steering system or if the car
loses electrical power and requires towing.
Bear in mind that steering will be more difficult than normal and more force will be required to turn the steering wheel.
183
09 Maintenance and service
09
Wiper blades
Replacing windscreen wiper blades
NOTE
Bear in mind that the wiper blade on the
driver’s side is longer than the one on the
passenger side.
Replacing a headlamp wiper blade1
–
–
–
–
Fold the wiper arm forward.
Pull the wiper blade outward.
Press the new wiper blade into position.
Check that the blade is firmly installed.
– Fold out the wiper arm and grasp the
wiper blade.
– Press in the ribbed spring catch on the
wiper blade while lifting it off at the arm
extension.
– Fit the new blade in reverse order and
check that it is properly secured.
1Applies
184
to the S60 R.
09 Maintenance and service
Battery
09
Battery care
WARNING
Batteries can generate oxyhydrogen gas,
which is highly explosive. One spark, which
can be generated if you connect the jump
leads incorrectly, is sufficient to make the
battery explode.
The battery contains sulphuric acid, which
can cause serious burns. If the acid comes
into contact with eyes, skin or clothing,
flush with large quantities of water. If acid
splashes into the eyes, seek medical attention immediately.
There may be two different types of battery.
They are fully interchangeable with each other.
The service life and function of the battery is
influenced by factors such as the number of
starts, discharging, driving style, driving conditions and climatic conditions.
IMPORTANT
Always use distilled or deionised water (battery water).
NOTE
For the battery to function satisfactorily:
• Regularly check that the electrolyte level is
correct (A) and never fill above the level
mark.
• Check all cells. Use a screwdriver to remove the cell caps (or the cover).
• If necessary, top up with distilled water to
the battery’s maximum mark.
• Tighten the cell caps (or cover) firmly.
The life of the battery is shortened if it becomes discharged repeatedly.
NOTE
An expended battery must be recycled in an
environmentally responsible manner as it
contains lead.
185
09 Maintenance and service
09
Battery
Symbols on the battery
Risk of explosion.
Changing the battery
Use protective goggles.
Further information in the
owner’s manual.
Store the battery out of the
reach of children.
The battery contains corrosive acid.
Avoid sparks and naked
flames.
186
Removing the battery
– Switch off the ignition and remove the key.
– Wait at least 5 minutes before touching
any electrical terminals. This allows time
for the information in the car’s electrical
system to be stored in the control modules.
– Undo the screws from the lock brace over
the battery and remove the brace.
– Bend up the plastic cover over the negative battery terminal or unscrew the cover
from the battery.
– Disconnect the negative battery lead.
09 Maintenance and service
Battery
09
– Detach the lower console holding the battery.
– Bend aside the plastic cover and disconnect the positive cable.
– Undo the evacuation hose.
– Remove the battery.
Fitting the battery
– Fit the battery into position.
– Position the lower console and screw it in
place.
– Connect the positive cable, press in and
fold down the plastic cover.
– Connect the negative cable, fold down the
plastic cover.
– Fit the plastic cover or the cover over the
battery.
– Make sure the evacuation hose is correctly connected to both the battery and the
outlet in the bodywork.
– Fit the lock brace over the battery and
tighten the screws.
187
09 Maintenance and service
Replacing bulbs
09
General
Changing front bulbs
Location of the bulbs in the headlamp
All front bulbs (except for fog lamps) are
changed by first removing the lamp housing
from the engine compartment.
1. Side marker lamp
2. Direction indicator
3. Dipped beam lamp, position lamp
(halogen and Bi-Xenon)
4. Main beam lamp, position lamp
(Active Bi-Xenon)
On certain variants, a white plastic sleeve
may impede bulb replacement. This can be
broken off and discarded.
All bulb specifications are given on page 255.
The following list contains bulbs and pointsource lamps that are specialised or unsuitable for changing except at a workshop:
•
•
•
•
•
•
•
•
Active Bi-Xenon and Bi-Xenon lamp
General interior lighting in the roof
Reading lamps
Glovebox lighting
Direction indicators in the door mirrors
Approach lighting in the door mirrors
High-level brake light
LEDs in the rear lamp cluster.
WARNING
On cars with Bi-Xenon and Active Bi-Xenon
headlamps the replacement of the Xenon
lamp must be carried out by an authorised
Volvo workshop. The headlamps must be
handled with extreme care due to the highvoltage unit in the Xenon lamp.
IMPORTANT
Never touch the bulbs’ glass with your fingers. Grease and oils from your fingers are
vaporised by the heat, coating and damaging the reflector.
188
NOTE
If you experience difficulty when replacing a
bulb then we recommend that you contact
an authorised Volvo workshop.
09 Maintenance and service
Replacing bulbs
Dipped beam, halogen
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover.
– Unplug the connector.
– Disconnect the spring clamp. First push to
the right so that the spring disconnects
and then out and down.
– Pull out and remove the bulb.
09
Main beam
To fit
– Fit the new bulb. In can only be positioned
one way.
– Press the clamp spring upwards and a
little to the left so that it secures in its
catch.
– Plug in the connector.
– Refit the cover.
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover.
– Turn the bulb anticlockwise and pull it out.
– Undo the connector by pressing the catch
out and then pulling.
To fit
– Plug the connector into the bulb, a click is
heard.
– Refit the bulb, turn it in position.
– Refit the cover.
189
09 Maintenance and service
09
Replacing bulbs
Position/parking lamps
190
Direction indicator, left-hand side
Halogen and Bi-Xenon headlamps
Active Bi-Xenon headlamps
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover (same cover as for
dipped beam).
– Pull out the lamp.
– Unplug the connector.
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover (same cover as for
dipped beam).
– Pull out the lamp.
– Unplug the connector.
To fit
– Fit the new bulb.
– Plug in the connector.
– Refit the cover.
To fit
– Fit the new bulb.
– Plug in the connector.
– Refit the cover.
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Twist the bulb holder anticlockwise and
remove it.
– Press the bulb inwards, turn it anticlockwise and remove it from the bulb holder.
To fit
– Fit the new bulb by pressing it in and
turning it clockwise.
– Refit the bulb holder in the lamp housing
and turn it clockwise.
09 Maintenance and service
Replacing bulbs
Direction indicator, right-hand side
– Switch off all lights and turn the ignition
key to position 0.
– Remove the radiator hose (1) from the
radiator.
– Remove the screw (2) to the filler pipe.
– Pull the pipe (3) straight up.
– Remove the ventilation hose (4) from the
pipe.
– Replace the bulb.
– Check that the washer fluid reservoir gasket between the filler pipe and the holder
is properly secured.
– Put the filler pipe (3) back into place.
– Refit the ventilation hose onto the filler
pipe (4).
– Screw in the screw (2) to the filler pipe and
refit the radiator hose to the radiator (1).
09
Side marker lamps
– Turn the bulb holder clockwise and pull it
out.
– Replace the bulb.
– Refit the bulb holder by turning it anticlockwise.
191
09 Maintenance and service
09
Replacing bulbs
Front fog lamps (option)
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Turn the bulb holder slightly anticlockwise.
– Pull out and remove the bulb.
To fit
– Fit the new bulb. In can only be positioned
one way.
– Refit the bulb holder, turn it clockwise
slightly. The "TOP" mark must be upward.
192
Cargo area
Number plate lighting
– Insert a screwdriver and gently turn so that
the lamp housing comes loose.
– Remove the bulb.
– Fit a new bulb.
– Refit the lamp housing.
– Switch off all lights and turn the ignition
key to position 0.
– Remove the screw with a screwdriver.
– Carefully remove the entire lamp housing
and pull it out. Turn the contact anticlockwise and pull out the bulb.
– Fit the new bulb.
– Plug in the connector and turn it clockwise
in the lamp housing.
– Refit the entire lamp housing and screw it
into place.
09 Maintenance and service
Replacing bulbs
09
Rear light cluster
Location of bulbs
1. Brake light
2. Position/parking lamps
3. Rear fog lamp (one side)
4. Side marker lamps
5. Direction indicators
Reversing lamp Removal
All bulbs in the rear lamp cluster can be replaced from inside the cargo area.
Bulb specifications can be found on
page 255.
– Switch off all lights and turn the ignition
key to position 0.
– Unlock and fold down the side panel to
access the bulbs.
The bulbs are located in two separate bulb
holders, an upper and a lower. Each bulb
holder has a locking pin.
To replace the bulb
– Detach the connector from the bulb
holder.
– Press the catches together and pull out
the holder.
–
–
–
–
Remove the bulb
Fit the new bulb in the holder.
Plug in the connector.
Close and secure the side panel.
NOTE
If the message BULB FAILURE/CHECK
STOP LAMP remains after a faulty bulb has
been replaced then an authorised Volvo
workshop must be consulted.
193
09 Maintenance and service
09
Replacing bulbs
Courtesy lighting
There is courtesy lighting under the
dashboard on the driver and passenger
sides.
– Insert a screwdriver and gently turn so that
the lamp housing comes loose.
– Remove the bulb.
– Fit a new bulb.
– Refit the lamp housing.
194
Vanity mirror lighting
Vanity mirror, different versions
– Insert a screwdriver and turn so that the
lamp lens releases.
– Remove the bulb.
– Fit a new bulb.
– First press the bottom of the lamp glass
back into place above the four hooks.
Then press the top in place.
09 Maintenance and service
Fuses
09
General
Cable routing may vary slightly due to engine variant. However, the components listed are in the
same positions.
All electrical functions and components are
fused to protect your car’s electrical system
from damage by short circuiting and
overloading.
Fuses are housed in four different locations
in the car:
1. Relay/fuse box in the engine compartment.
2. Fuse box in the passenger compartment within the sound barrier on the
driver’s side.
3. Fuse box in the passenger compartment at dashboard end on driver’s
side.
4. Fuse box in cargo area.
Changing
If an electrical component or function does
not work, this may be because the component’s fuse was temporarily overloaded and
blew.
– Look in the fuse diagram to locate the
fuse.
– Pull out the fuse and check from the side
to see whether the curved wire has blown.
– If this is the case, replace it with a new
fuse of the same colour and amperage.
There are a number of spare fuses in the cover on the end of the dashboard. There are
also pliers which facilitate the removal and
fitting of fuses.
If the same fuse blows repeatedly, there is a
fault in the component, and you should contact an authorised Volvo workshop to have it
checked.
195
09 Maintenance and service
09
Fuses
Relay/fuse box in the engine compartment
Press in the plastic catches on the short sides of the box and pull the cover upward.
1. ABS........................................................................................... 30 A
2. ABS .................................................................................. 30 A
3. High-pressure washer, headlamps .................................... 35 A
4. Parking heater (option)....................................................... 25 A
5. Auxiliary lamps (option)...................................................... 20 A
6. Starter motor relay............................................................. 35 A
7. Windscreen wipers ............................................................ 25 A
8. Fuel pump ......................................................................... 15 A
9. Transmission control module (TCM), diesel, R-models ....... 15 A
10. Ignition coils (petrol), engine control module (ECM),
injection valves (diesel) ...................................................... 20 A
196
11. Accelerator pedal sensor (APM), AC compressor,
fan electronics box ........................................................... 10 A
12. Engine control module (ECM) (petrol) injection valves (petrol), ...
mass air flow sensor (petrol).............................................. 15 A
mass air flow sensor (diesel) ............................................... 5 A
13. Electronic throttle module (ETM), (petrol)........................... 10 A
Electronic throttle module (ETM), air mixing valve,
fuel pressure regulator, solenoid valve, (diesel) ................. 15 A
14. Lambda-sond (petrol)........................................................ 20 A
Lambda-sond (diesel) ....................................................... 10 A
15. Crankcase ventilation heater, solenoid valves (petrol)........ 10 A
solenoid valves, glow plugs (diesel) ................................... 15 A
16. Dipped beam, left ............................................................. 20 A
09 Maintenance and service
Fuses
09
17. Dipped beam, right ............................................................ 20 A
18. - ..............................................................................................19. Engine control module (ECM) supply, engine relay ............... 5 A
20. Position lamps ................................................................... 15 A
21. ................................................................................................-
197
09 Maintenance and service
09
Fuses
Fuses in the passenger compartment at dashboard end
face on driver’s side
A decal which indicates the positions and amperages of the fuses is located in the end box cover.
1.
2.
3.
4.
5.
6.
Power driver’s seat ................................................................... 25 A
Power passenger seat ....................................................... 25 A
Climate control system fan ................................................ 30 A
Control module, right front door......................................... 25 A
Control module, left front door ........................................... 25 A
General lighting, ceiling (RCM)
Upper electronic module (UEM) ......................................... 10 A
7. Sunroof ............................................................................. 15 A
8. Ignition switch, SRS system, engine control module (ECM)
deactivating SRS passenger side, (PACOS), electronic
immobiliser (IMMO), transmission control module (TCM),
diesel, R-models .............................................................. 7.5 A
198
9. OBDII, light switch (LSM), Steering Angle Sensor (SAS),
Steering Wheel Module (SWM) ............................................ 5 A
10. Audio ................................................................................ 20 A
11. Amplifier .......................................................................... 30 A
12. RTI display ........................................................................ 10 A
13. Phone ................................................................................. 5 A
14. – 38........................................................................................ -
09 Maintenance and service
Fuses
09
Fuses in the passenger compartment within the sound
barrier on the driver’s side
1. Seat heating, right side ............................................................. 15 A
2. Seat heating, left side ........................................................ 15 A
3. Horn .................................................................................. 15 A
4. - ..............................................................................................5. - ..............................................................................................6. Reserve ...................................................................................7. Reserve ...................................................................................8. Siren.................................................................................... 5 A
9. Brake lamp switch feed ....................................................... 5 A
10. Combined instrument panel (DIM), climate control (CCM),
parking heater, power driver’s seat .................................... 10 A
11. Front and rear seat socket ................................................ 15 A
12. -.............................................................................................. 13. Reserve .................................................................................. 14. Headlamp wipers (S60 R) .................................................. 15 A
15. ABS, STC/DSTC ................................................................. 5 A
16. Electronic power steering (ECPS), Active Bi-Xenon (HCM),
headlamp levelling .............................................................10 A
17. Fog lamp, front left........................................................... 7.5 A
18. Fog lamp, front right ........................................................ 7.5 A
19. Reserve .................................................................................. 20. Reserve .................................................................................. -
199
09 Maintenance and service
09
Fuses
21. Transmission Control Module (TCM), reverse gear inhibitor
(M66) ................................................................................. 10 A
22. Main beam, left .................................................................. 10 A
23. Main beam, right................................................................ 10 A
24. - ..............................................................................................25. - ..............................................................................................26. Reserve ...................................................................................27. Reserve ...................................................................................28. Power passenger seat, audio ............................................... 5 A
29. BiFuel, fuel pump.............................................................. 7.5 A
30. BLIS .................................................................................... 5 A
31. Reserve ...................................................................................32. Reserve ...................................................................................33. Vacuum pump ................................................................... 20 A
34. Washer pump, headlamp wipers (S60 R) ............................ 15 A
35. - ..............................................................................................36. - ..............................................................................................-
200
09 Maintenance and service
Fuses
Fuses in the cargo area
09
1. Reversing lamp..........................................................................10 A
2. Position lamps, fog lamps, cargo area lighting, number
plate lighting, LEDs in brake lighting ................................. 20 A
3. Accessories (AEM) ............................................................ 15 A
4. Reserve .................................................................................. 5. REM electronics ................................................................ 10 A
6. CD changer, TV, RTI......................................................... 7.5 A
7. Towing bracket wiring (30-feed) ........................................ 15 A
8. Cargo area socket............................................................. 15 A
9. Rear right door: power window, power window lock .......... 20 A
10. Rear left door: power window, power window lock ............ 20 A
11. Reserve .................................................................................. 12. Reserve .................................................................................. 13. Diesel filter heater ............................................................. 15 A
14. -.............................................................................................. 15. Reserve .................................................................................. 16. Reserve .................................................................................. 17. Audio accessories ............................................................... 5 A
18. Reserve .................................................................................. 19. Foldable head restraint ..................................................... 15 A
20. Towing bracket wiring (15-feed) ........................................ 20 A
21. Reserve .................................................................................. 22. -.............................................................................................. 23. AWD ............................................................................... 7.5 A
24. Four-C SUM...................................................................... 15 A
25. -.............................................................................................. -
201
09 Maintenance and service
09
Fuses
26. Parking assistance .............................................................. 5 A
27. Main fuse: Towing bracket wiring, Four-C,
Parking assistance, AWD ................................................... 30 A
28. Central locking system (PCL) ............................................. 15 A
29. Trailer lighting, left: position lamps, direction indicator ...... 25 A
30. Trailer lighting, right: brake lamp, rear fog lamp,
direction indicator ............................................................. 25 A
31. Main fuse: Fuse 37, 38 ....................................................... 40 A
32. - ..............................................................................................33. - ..............................................................................................34. - ..............................................................................................35. - ..............................................................................................36. - ..............................................................................................37. Heated rear window........................................................... 20 A
38. Heated rear window........................................................... 20 A
202
09 Maintenance and service
09
203
Overview HU-450 ................................................................................... 206
Overview HU-650 ................................................................................... 207
Overview HU-850 ................................................................................... 208
Audio functions HU-450/650/850 .......................................................... 209
Audio functions HU-450 ......................................................................... 210
Audio functions HU-650/850 ................................................................. 211
Radio functions HU-450/650/850 .......................................................... 212
Radio functions HU-450 ........................................................................ 213
Radio functions HU-650/850 ................................................................. 214
Radio functions HU-450/650/850 .......................................................... 215
Cassette player HU-450 ......................................................................... 220
CD player HU-650 .................................................................................. 221
Internal CD changer HU-850 .................................................................. 222
External CD changer HU-450/650/850 (option) ..................................... 223
Dolby Surround Pro Logic II HU-850 ..................................................... 224
Technical data ........................................................................................ 225
Phone functions (option) ........................................................................ 226
Call options ............................................................................................ 229
Memory functions .................................................................................. 232
Menu functions ...................................................................................... 234
Miscellaneous information ..................................................................... 239
204
INFOTAINMENT SYSTEM
10
10 Infotainment system
Overview HU-450
10
1. POWER (On/Off) – Press
VOLUME – Turn
2. PRESET/CD
PUSH MENU –
Stored radio stations
CD changer (option)
3. SOURCE
PUSH MENU –
Opens main menu – Press
Turn to select:
Radio – FM, AM
Cassette
CD changer (option)
206
4. FADER – Press out and turn
BAL – Press out, pull and turn
5. SCAN – Automatic station search
6. EXIT – Scroll back in the menu
7. Navigation buttons –
CD/radio – seek/change station or
track
Cassette – Fast forward/rewind/select
next/previous track
8. Display
9. FM – Shortcut between FM1, FM2, FM3
10. AM – Shortcut between AM1, AM2
11. TAPE – Shortcut
12. AUTO – Automatic station preset
13. BASS – Press out and turn
TREBLE – Press out, pull and turn
14. REV – Cassette – Direction select–
CD changer (option) – Random
15. Cassette opening
16. Cassette eject
10 Infotainment system
Overview HU-650
10
1. POWER (on/off) – Press
VOLUME – Turn
2. 1-6 – Station setting buttons/selecting
CD changer position
3. BASS – Press out and turn
4. TREBLE – Press out and turn
5. BALANCE – Press out and turn
6. FADER – Press out and turn
7. SOURCE
PUSH MENU –
Opens main menu – Press
Turn to select:
Radio – FM, AM
CD
CD changer (option)
8. SCAN – Automatic station search
9. EXIT – Scroll back in the menu
10. Navigation buttons –
seek/change station or track
11. CD eject
12. CD slot
13. RND – CD random
14. FM – Shortcut between FM1, FM2, FM3
15. AM – Shortcut between AM1, AM2
16. CD – Shortcut
17. AUTO – Automatic station preset
18. Display
207
10 Infotainment system
Overview HU-850
10
1. POWER (On/Off) – Press
VOLUME – Turn
2. 1-6 – Station setting buttons/selecting
CD changer position
3. BASS – Press out and turn
4. TREBLE – Press out and turn
5. BALANCE – Press out and turn
6. FADER – Press out and turn
7. SOURCE
PUSH MENU–
Opens main menu – Press
Turn to select:
Radio – FM, AM
208
CD
CD changer (option)
8. SCAN – Automatic station search
9. EXIT – Scroll back in the menu
10. Navigation buttons –
seek/change station or track
11. CD eject
12. Dolby Surround Pro Logic II
13. OFF – 2-channel stereo
14. 3-CH – 3-channel stereo
15. CD slot
16. RND – CD random
17. FM – Shortcut between FM1, FM2, FM3
18. AM – Shortcut between AM1, AM2
19. CD – Shortcut
20. AUTO – Automatic station preset
21. Display
10 Infotainment system
Audio functions HU-450/650/850
On/Off switch
Volume control – TP/PTY/NEWS
Press the knob to turn on or
switch off the radio.
If a cassette or CD is playing when the radio
receives a traffic bulletin, news or selected
programme type, the function is interrupted
and the bulletin or message is broadcast with
the volume selected for traffic information,
news or programme type.
Volume control
Turn the knob clockwise to
increase volume. Volume
control is electronic and lacks an end stop. If
you have a steering wheel keypad, increase
or decrease volume with (+) or (–) buttons.
Low battery voltage
If battery voltage is low, a text appears in the
combined instrument unit display. The energy economy function of the car may switch
off the radio. Charge the battery by starting
the engine.
AUX
10
When the bulletin or message is finished, the
unit immediately returns to the previously set
volume and resumes playing the cassette
or CD.
The audio system can be equipped with different options and different versions. There
are three audio system versions:
• Performance
• High Performance
• Premium Sound.
FM and AM radio with RDS and CD player is
however included in each version.
Input for external audio source (AUX) 3.5 mm
The AUX input can be used for connecting an
MP3 player for example.
Sometimes the AUX external audio source
can be heard at a different volume to the internal audio sources, e.g. the CD player. If
the audio volume of the external audio
source is too high then the sound quality may
be impaired. Prevent this by adjusting the input volume of the AUX input.
209
10 Infotainment system
Audio functions HU-450
10
Volume control – AUX
– Press SOURCE, turn to ADVANCED
MENU and select by pressing SOURCE.
– Press SOURCE, turn to AUDIO SETTINGS and select by pressing SOURCE.
– Press SOURCE, turn to AUX INPUT
LEVEL and select by pressing SOURCE.
In this mode the volume can be adjusted by
turning SOURCE.
Bass
Balance – right/left
Adjust the bass by pressing out the knob and turning it to the left or right.
The bass is "normalised" in
the centre position. Press
the knob back into its original position after adjustment.
Treble
Adjust the treble by pressing the knob, pulling it out
farther and turning it to the
left or right. The treble is
"normalised" in the centre
position. Press the knob
back into its original position after adjustment.
Fader – Balance front/rear
Set a suitable balance between the front and rear
speakers by pressing the
knob and turning it right
(more sound from front pair)
or left (more sound from
rear pair). The balance is
"normalised" in the centre position. Press the
knob back into its original position after adjustment.
210
Adjust balance by pressing
and pulling out the knob
and turning it left or right.
The balance is "normalised"
in the centre position. Press
the knob back into its original position after adjustment.
Selecting the sound source
There are two ways to select sound source:
Either with the shortcut
keys AM, FM, TAPE or with
the SOURCE knob. Turn
the SOURCE knob to select
between radio settings (FM1, FM2, FM3 and
AM1, AM2). If a cassette player or CD changer (option) is connected, it can also be selected with the knob.
Press the AM and FM button repeatedly to toggle between FM1, FM2, FM3 and
AM1, AM2.
The selected sound source
is shown in the display.
10 Infotainment system
Audio functions HU-650/850
Bass
Balance – right/left
Adjust balance by pressing the knob and
turning it left or right. The balance is "normalised" in the centre position. Press the knob
back into its original position after adjustment.
Fader – Balance front/rear
Set a suitable balance between the front and
rear speakers by pressing the knob and turning it right (more sound from front pair) or left
(more sound from rear pair). The balance is
"normalised" in the centre position. Press the
knob back into its original position after adjustment.
Adjust the bass by pressing out the knob and
turning it to the left or right.
The bass is "normalised" in the centre position. Press the knob back into its original position after adjustment.
Selecting the sound source
There are two ways to select sound source:
10
Either with the shortcut
keys AM, FM, TAPE or with
the SOURCE knob.
Turn the SOURCE knob to
select between radio settings (FM1, FM2,
FM3 and AM1, AM2). If a cassette player or
CD changer (option) is connected, it can also
be selected with the knob.
3Press the AM and FM button repeatedly to toggle between FM1, FM2, FM3 and
AM1, AM2.
The selected sound source
is shown in the display.
Treble
Adjust the treble by pressing the knob and
turning it to the left or right. The treble is
"normalised" in the centre position. Press the
knob back into its original position after adjustment.
211
10 Infotainment system
Radio functions HU-450/650/850
Scanning
10
Press the SCAN button to
start the search. When the
radio finds a station, it
stops there for about
10 seconds and then continues its search. To listen
to the station, press the
SCAN or EXIT button.
NOTE
Tuning
Press
or
to seek lower or higher frequencies. The radio searches for the next audible station and then stops. Press the button again to continue the search.
If the car is equipped with an integrated
phone, the steering wheel keypad cannot
be used for radio functions while the phone
is in active mode. Phone information is continuously displayed while the phone is in active mode.
Manual tuning
Press and hold
or
. MAN is shown in
the display. The radio slowly scrolls in the desired direction, increasing its tempo after a
few seconds. Release the button when the
desired frequency appears in the display.
Switch off the phone by pressing
. If there
is no SIM card in the phone, switch it off, see
page 206.
The frequency can then be adjusted by briefly pressing one of the arrow keys
or
.
Manual adjusting mode remains available for
five seconds after the last press.
212
Steering wheel keypad
If you have a keypad in the
steering wheel, press the
right or left arrow to select
preset stations.
10 Infotainment system
Radio functions HU-450
Programming stations
– Set the desired frequency.
– Briefly press the PRESET/CD knob.
– Select a number by turning forward or
back.
Press again to store the desired frequency
and station.
Preset
To select a preset radio
programme, turn the
PRESET/CD knob to the
stored number. The preset
programme is shown in the
display.
Autostoring stations
This function automatically
seeks and stores up to
10 strong AM or FM stations in a separate memory. The function is especially useful in areas in which
you are unfamiliar with the
radio stations or their frequencies.
– AUTO is shown in the display and a
number of strong stations (max. 10) from
the set frequency band are saved in the
autostore memory. If there are no stations
with sufficient signal strength,
NO STATION is displayed.
– Briefly press the AUTO button or one of
the arrows of the steering wheel keypad to
scroll to another of the automatically preset stations.
AUTO is shown in the display when the radio
is in Autostore mode. The text disappears
when you return to normal Radio mode.
10
Returning to normal Radio mode
– Press FM, AM or EXIT or turn the
PRESET/CD knob.
Returning to Autostore mode
– Briefly press AUTO.
1. Select radio mode using the FM or AM
button.
– Start the search by pressing and holding
AUTO (more than 2 seconds).
213
10 Infotainment system
Radio functions HU-650/850
Storing stations
Autostoring stations
AUTO seeks and stores up
to ten strong AM or FM stations in a separate memory. If more than ten stations
are found, the ten strongest are selected. This function is particularly useful areas in which you are unfamiliar with the radio
stations and their frequencies.
10
– Select radio mode using the AM or FM
button.
Start the search by pressing and holding
AUTO (more than 2 seconds).
To store stations on the preset buttons 1-6:
– Set the desired station.
– Press and hold the desired station storage
button.
The sound mutes a few seconds.
STATION STORED is shown in the display.
Up to 6 stations each can be stored under
AM1, AM2, FM1, FM2 and FM3, a total of
30 stations.
AUTO is shown in the display and a number
of strong stations (max. 10) from the set frequency band are saved in the Autostore
memory. If there are no stations with sufficient signal strength, then NO STATION is
displayed.
– Briefly press the AUTO button or one of
the arrows of the steering wheel keypad to
scroll to another of the automatically preset stations.
AUTO is shown in the display when the radio
is in Autostore mode. The text disappears
when you return to normal Radio mode.
Returning to normal Radio mode
– Press the FM, AM or EXIT button.
214
Returning to Autostore mode
– Briefly press AUTO.
10 Infotainment system
Radio functions HU-450/650/850
Radio Data System – RDS
Traffic information – TP station
RDS is a system that links together specific
network transmitters. It is used, for example,
to tune the correct frequency of a station irrespective of the transmitter or the active audio
source (e.g. CD). The system can also be
used for receiving traffic information and for
finding broadcasts of a specific type. Radio
text is also a component of RDS. A radio station can, for example, transmit information
about the radio programme currently being
broadcast.
Traffic information from RDS stations interrupts other sound sources. The message is
heard at the volume set for this specific feature. As soon as the message ends, the audio system returns to the previous sound
source and volume setting.
Some radio stations do not use RDS or only
use a limited range of its features.
PI seek (automatic search for
stations)
When listening to an RDS transmitter, various
information, such as traffic information, is
stored in the radio.
When a preset RDS transmitter is later selected, the radio updates the transmitter’s
RDS information. If the radio is at the boundary or just outside of the transmitter’s range,
the radio automatically seeks the strongest
possible transmitter of that channel.
If there is no audible transmitter, the radio
quiets and the PI SEEK appears in the display until the station is found.
Activating traffic information
– Select radio mode using the FM button
and press SOURCE.
– Select TP and press SOURCE.
– Turn SOURCE, select TP ON (flashing
text) and press SOURCE.
– Press EXIT.
Deactivate TP
– Select radio mode using the FM button
and press SOURCE.
– Select TP and press SOURCE.
– Turn SOURCE, select TP OFF (flashing
text) and press SOURCE.
– Press EXIT.
TP is shown in the display when this function
is active.
Press EXIT if you do not wish to listen to a
traffic bulletin. However, the TP function remains active and the radio waits for the next
traffic bulletin.
Activate traffic information from a
special channel
– Select radio mode using the FM button.
– Activate the station from which traffic information is to be received.
– Press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select TP STATION and
press SOURCE.
– Turn SOURCE, select SET CURRENT and
press SOURCE.
– Press EXIT.
10
Deactivating TP Station
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select TP STATION and
press SOURCE.
– Turn SOURCE, select TP STATION OFF
and press SOURCE.
– Press EXIT.
215
10 Infotainment system
Radio functions HU-450/650/850
10
Alarm
"Alarm!" is shown in the radio display when
an alarm message is broadcast. This function
is used to warn motorists of major accidents
and catastrophes, such as a bridge collapse
or an accident at a nuclear plant.
TP search
This function allows you to listen to traffic information when travelling between different
areas and countries without selecting a station.
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select TP SEARCH and
press SOURCE.
– Turn SOURCE, select TP SEARCH ON or
TP SEARCH OFF (flashing text) and
press SOURCE.
– Press EXIT.
News
Messages with a programme code (such as
news from RDS stations) will interrupt other
sound sources at the volume set for this specific feature. As soon as the news broadcast
216
is finished, the audio system returns to the
previous sound source and volume setting.
Activating News
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select NEWS and
press SOURCE.
– Turn SOURCE, select NEWS ON (flashing
text) and press SOURCE.
– Press EXIT.
NEWS appears in the display.
Deactivating News
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select NEWS and
press SOURCE.
– Turn SOURCE, select NEWS OFF (flashing text) and press SOURCE.
– Press EXIT.
NEWS disappears from the display.
Press EXIT if you do not wish to listen to a
news broadcast. However, the News function remains active and the radio waits for the
next news programme.
Interruptions for news from the current
station
– Select radio mode using the FM button.
– Activate the station from which traffic information is to be received.
– Press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select NEWS STATION
and press SOURCE.
– Turn SOURCE, select SET CURRENT and
press SOURCE.
– Press EXIT.
Deactivating News Station
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select NEWS STATION
and press SOURCE.
– Turn SOURCE, select NEWS STN OFF
and press SOURCE.
– Press EXIT.
10 Infotainment system
Radio functions HU-450/650/850
Programme type – PTY
Programme type
Display shows
Use the PTY function to select between the
various programme types.
Oldies music
Information
Jazz music
Serious classic
Culture and Art
Light classic
Easy listening
National music
News
Pop music
Travel and holiday
Rock music
Social affairs
Sport
Drama
Phone In
Entertainment
Education
Science
Weather & Metro
Other music
"Oldies"
Info
Jazz
Classical
Culture
L Class
Easy list
Nation M
News
Pop
Travel
Rock
Social
Sport
Drama
Phone
Enterta
Educ
Science
Weather & Metro
Other M
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select PTY and
press SOURCE.
– Turn SOURCE, select PTY in the menu
and press SOURCE.
The radio begins seeking the selected programme type.
If you do not wish to listen to the station
found by the radio, continue the search using
the left or right arrow key.
If the radio does not find a station with the
selected programme type, it returns to the
previous frequency.
Not all radio stations have a PTY designation.
Programme type
Display shows
OFF
Current affairs
Religion
Country music
Documentary
Finance
Folk music
Leisure and hobby
Children’s progs
PTY OFF
Current
Spiritual
Country
Document
Finance
Folk
Leisure
Children’s progs
PTY standby
PTY mode is then in standby until the selected programme type is broadcast. When this
happens, the radio automatically switches to
the station broadcasting the selected programme type.
Deactivating
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select PTY and
press SOURCE.
– Turn SOURCE, select PTY OFF and
press SOURCE.
– Press EXIT.
The PTY symbol disappears from the display
and the radio resumes normal mode.
10
PTY language
The PTY function can be used to select the
language used in the radio display (English,
German, French or Swedish).
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select PTY LANGUAGE
and press SOURCE.
– Turn SOURCE, select language and
press SOURCE.
– Press EXIT.
217
10 Infotainment system
Radio functions HU-450/650/850
10
Automatic frequency updating
Regional radio programmes
The AF function is normally activate and ensures that the radio tunes to the strongest
available transmitter.
The regional function is normally deactivated.
When the function is activated you can continue to listen to a regional broadcasts even if
the signal is weak.
Activating AF
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
– Turn SOURCE, select AF ON (flashing
text) and press SOURCE.
– Press EXIT.
Deactivating AF
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select
RADIO SETTINGS MENU and
press SOURCE.
– Turn SOURCE, select AF OFF (flashing
text) and press SOURCE.
– Press EXIT.
218
Activating REG
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select
RADIO SETTINGS MENU and
press SOURCE.
– Turn SOURCE, select REG ON (flashing
text) and press SOURCE.
– Press EXIT.
Deactivating REG
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
– Turn SOURCE, select REG OFF (flashing
text) and press SOURCE.
– Press EXIT.
EON – Local/Distant (Enhanced Other
Networks)
When EON is activated, the radio programme
is interrupted for traffic bulletins, news
broadcasts or the like from other channels.
The function has two levels
Local – only interrupts if the signal is strong.
Distant – also interrupts with weaker signals.
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select
RADIO SETTINGS MENU and
press SOURCE.
– Turn SOURCE, select EON (flashing text)
and press SOURCE.
– Turn SOURCE, select Local or Distant
and press SOURCE.
– Press EXIT.
Resetting RDS functions
Resets all radio settings to the original factory settings.
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
10 Infotainment system
Radio functions HU-450/650/850
– Turn SOURCE, select
RESET TO DEFAULT and
press SOURCE.
– Press EXIT.
10
ASC (Active Sound Control)
The ASC function automatically adapts the
volume of the radio to vehicle speed.
Activating ASC:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
MENU and press SOURCE.
– Turn SOURCE, select ASC LEVEL and
press SOURCE.
– Turn SOURCE select LOW, MEDIUM,
HIGH or Off and press SOURCE.
Radio text
Some RDS stations broadcast information,
such as about programme content and artists.
Hold the FM button depressed a few seconds to access any transmitted radio text,
which then appears in the display.
After the text is shown twice, the radio once
again displays the station/frequency.
A brief press on EXIT ends the radio text display.
219
10 Infotainment system
Cassette player HU-450
Cassette opening
10
Cassette eject
Fast forward/reverse
If you press the button, the
tape stops and the cassette
is ejected. Turn the
SOURCE knob to select a
new programme source.
The cassette can be inserted or ejected even if the
system is switched off.
The tape is fast forwarded
by pressing and holding
and is rewound with
.
"FF" (fast forward) or
"REW" (rewind) is shown in
the display during this time.
Press the button again to stop fast forwarding/rewinding.
Dolby B Noise Reduction
Insert the cassette in the slot with the wider
part to the right. TAPE Side A appears in the
display.
When one side is finished, the cassette player automatically plays back the other side
(auto reverse).
To play a cassette that is already in the cassette player, turn the SOURCE knob or press
the TAPE shortcut key.
Changing tape direction
Press the REV button in order to play the
other side of the cassette; the side being
played will be shown in the display.
220
This is a preset function which can be
switched off as follows: press and hold the
REV button until the Dolby symbol disappears from the
display. Press the same
button again in order to reactivate the Dolby
function.
Dolby Noise Reduction is manufactured under license of Dolby Laboratories Licensing
Corporation. Dolby and the double D
symbol
are trademarks of Dolby Laboratories Licensing Corporation.
Scanning
Scan plays the first ten seconds of each track.
Press the SCAN or EXIT
button when you find a
track you wish to listen to.
Next track – Previous track
Pressing
automatically fast forwards the
tape to the next track.
Pressing
automatically rewinds the tape
to the previous track. For this function to be
operational, there must be a five second
pause between tracks.
If the car is equipped with a steering wheel
keypad, the arrows can also be used.
10 Infotainment system
CD player HU-650
CD player
Insert a CD. If there is already a CD in the
player, activate it by turning the SOURCE
knob or pressing the CD shortcut key.
Fast forward/reverse and change
track
Press and hold down the
right or left-hand arrow key
to fast forward/reverse a
track or the whole disc.
Fast forward/reversing cannot be done using the
steering wheel keypad.
CD eject
If you press the button
shown in the illustration, the
CD player stops playing
and the disc is ejected.
NOTE
For reasons of traffic safety, you have
twelve seconds to handle the ejected disc.
Otherwise, the CD is drawn back into the
player and resumes with the most recently
played track.
Briefly press the left or right-hand arrow key
to go to the previous or next track. The steering wheel keypad can also be used for this.
Track numbers are shown in the display.
CD discs
Using CD discs burned at home could result
in poor or non-existent sound. Music CD
discs complying with the ISO 60908 standard provide the best sound quality.
10
IMPORTANT
Only use standard discs (12 cm in diameter). Do not use CDs with that have disc labels. The heat from the CD player could
cause the label to come loose from the disc.
The CD player could then be damaged.
Scanning
Scan plays the first ten seconds of each
track.
Press the SCAN or EXIT button when you
find a track you wish to listen to.
Random
Press RND (random) to
connect the random function. The system plays
tracks from the disc in random order. "RND" is displayed as long as this function is activated.
221
10 Infotainment system
Internal CD changer HU-850
10
Internal CD changer
Selecting disc number
Random
HU-850 contains an internal 6-disc CD
changer. Press the CD shortcut key or turn
the SOURCE knob to activate the CD player.
The CD player resumes with the most recently played CD.
Use buttons 1-6 to select which disc is to be
played. The disc and track numbers are
shown in the display.
Up to 6 discs can be inserted in the CD player. An empty slot in the player must be selected when inserting a disc. This is done by
selecting from buttons 1-6. An available position is shown in the display. Make sure
"LOAD DISC" is shown before inserting a
new disc.
Press and hold down the
right or left-hand arrow key
to fast forward/reverse a
track or the whole disc.
Fast forward/reversing cannot be done using the
steering wheel keypad.
Press RND (random) to
connect the random function. A randomly selected
disc plays a randomly selected track. A new disc
and track are then chosen
the same way. "RND" is
displayed as long as this function is
activated.
CD eject
If you press the button
shown in the illustration, the
CD player stops playing
and the disc is ejected.
Fast forward/reverse and change
track
Briefly press the left or right-hand arrow key
to go to the previous or next track. The steering wheel keypad can also be used for this.
Track numbers are shown in the display.
Scanning
Scan plays the first ten seconds of each
track.
NOTE
For reasons of traffic safety, you have
twelve seconds to handle the ejected disc.
Otherwise, the CD is drawn back into the
player and resumes with the most recently
played track.
222
Press the SCAN or EXIT button when you
find a track you wish to listen to.
CD discs
Using CD discs burned at home could result
in poor or non-existent sound. Music CD
discs complying with the ISO 60908 standard provide the best sound quality.
IMPORTANT
Only use standard discs (12 cm in diameter). Do not use CDs with that have disc labels. The heat from the CD player could
cause the label to come loose from the disc.
The CD player could then be damaged.
10 Infotainment system
External CD changer HU-450/650/850 (option)
CD changer
– Pull out the CD cartridge and insert the
discs.
2. Reinsert the cartridge in the CD changer.
Random
Press RND (HU-650 and
850) to activate the Random function. For radio
HU-450, it is activated with
the REV button.
Selecting discs
Select which disc is to be played by turning
the PRESET/CD knob (HU-450) or using buttons 1-6 (HU-650/850). The disc and track
numbers are shown in the display.
Fast forward/reverse and change
track
Press and hold down the
right or left-hand arrow key
to fast forward/reverse a
track or the whole disc.
Fast forward/reversing cannot be done using the
steering wheel keypad.
The external CD changer is mounted behind
the panel on the rear left-hand side of the
cargo area.
Activate the CD changer mode by turning the
SOURCE knob; the CD changer resumes
playing the most recently played disc and
track. If the CD player cartridge* is empty,
"LOAD CARTRIDGE" will be shown in the
display.
Loading discs in the CD changer
– Slide open the CD changer cover
– Press the cartridge eject button on the
changer.
Briefly press the left or right-hand arrow key
to go to the previous or next track. The steering wheel keypad can also be used for this.
Track numbers are shown in the display.
Scanning
10
A randomly selected track
is played from a randomly selected disc. A
new track or disc is then selected the same
way. "RND" is displayed while this function is
active.
CD discs
Using CD discs burned at home could result
in poor or non-existent sound. Music CD
discs complying with the ISO 60908 standard provide the best sound quality.
IMPORTANT
Only use standard discs (12 cm in diameter). Do not use CDs with that have disc labels. The heat from the CD player could
cause the label to come loose from the disc.
The CD player could then be damaged.
Scan plays the first ten seconds of each
track.
Press the SCAN or EXIT button when you
find a track you wish to listen to.
223
10 Infotainment system
Dolby Surround Pro Logic II HU-850
General
10
Dolby Surround Pro Logic II Mode
Dolby Surround Pro Logic II is a further refinement of the previous system and provides a significantly improved sound experience. This improvement is especially noticeable to rear seat passengers.
Dolby Surround Pro Logic II together with a
centre speaker in the dashboard offers a
sound experience very close to being there.
To select Dolby Surround
Pro Logic II Mode, press
"
PL II". "
PL II" is
shown in the display. Press
OFF to return to 2-channel
stereo.
3-channel stereo
Select 3-channel stereo by
pressing 3-CH. "3 ch" will
be shown in the display.
Resume 2-channel stereo
function by pressing OFF.
The normal left-right stereo channels are divided into left-centre-right. In addition, surround sound is produced by the rear speakers. Dolby Surround Pro Logic II works in CD
mode.
3-channel stereo (3-CH) is recommended for
AM and FM radio transmissions.
Dolby Surround Pro Logic II is a registered
trademark of Dolby Laboratories Licensing
Corporation. Dolby Pro Logic II Surround
System is licensed from Dolby Laboratories
Licensing Corporation.
224
Surround Level
This function is used to set the output level of
the rear channels.
– Press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
and press SOURCE.
– Turn SOURCE, select
SURROUND LEVEL and press SOURCE.
– Turn SOURCE, select level and
press SOURCE.
– Press EXIT.
Mid EQ Level
Centre Level
This function is used to set the level of the
centre channel.
– Press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
and press SOURCE.
– Turn SOURCE, select CENTRE LEVEL
and press SOURCE.
– Turn SOURCE, select level and
press SOURCE.
– Press EXIT.
This function is used to fine-tune the sound
from the speakers.
– Press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
and press SOURCE.
– Turn SOURCE, select MID EQ LEVEL and
press SOURCE.
– Turn SOURCE, select level and
press SOURCE.
– Press EXIT.
10 Infotainment system
Technical data
Output
Impedance
Operating voltage
External amplifier
HU-450
HU-650
HU-850
4 x 25 W
4 x 25 W
4 Ohm
12 V, negative ground
4 x 50 W or 4 x 75 W (option)
1 x 25 W (centre loudspeaker)
–
Radio
Frequency
U (FM)
M (AM)
L (AM)
1HU-850
10
4 x 50 W or 4 x 75 W1
87.5 – 108 MHz
522 – 1611 kHz
153 – 279 kHz
must be connected to an external amplifier.
225
10 Infotainment system
Phone functions (option)
10
Phone system components
226
10 Infotainment system
Phone functions (option)
General rules
• Put traffic safety first! If when driving you
require to use the privacy handset in the
armrest, park the car in a safe place first.
• Switch off the phone when refuelling.
• Switch off the phone in areas where blasting work is being carried out.
• Only allow authorised personnel service
your phone.
Emergency calls
Emergency calls to emergency services can
be made without the ignition key or the SIM
card.
– Press the On/Off button.
– Ring the emergency number that applies
to your region (within EU: 112).
– Press the green button
.
Phone system components
1. Keypad on centre console
All phone functions can be controlled via the
keypad in the centre console.
2. Steering wheel keypad
The majority of phone functions can be controlled via the steering wheel keypad.
When the phone is active, the keypad can
only be used for phone functions. Phone information is always shown in the display
when the phone is activated. The phone
must be deactivated in order to use the buttons for radio settings, see page 228.
3. Display
The display will show menu functions, messages, phone numbers, etc.
5. SIM card
The SIM card is inserted below the keypad in
the centre console.
10
Switch off the phone whenever a SIM card is
not in use. Otherwise, messages from other
functions cannot be shown in the display.
6. Microphone
The microphone is integrated in the rearview
mirror.
7. Loudspeaker
The speaker is integrated in the driver’s seat
head restraint.
8. Antenna
The antenna is mounted against the windscreen in front of the rearview mirror.
4. Privacy handset
The privacy handset can be used for private
conversations when you do not wish to be
disturbed.
227
10 Infotainment system
Phone functions (option)
SIM card
Switching the phone on and off
Active mode
The phone must be in active mode for its
functions to be available for use (does not
apply to receiving calls). Activate the phone
by pressing
in the keypad in the centre
console or in the steering wheel keypad.
10
Phone information is shown continuously in
the display when the phone is activated.
Press
The phone can only be used with a valid SIM
card (Subscriber Identity Module). Your network operator supplies this card.
Always use the SIM card during phone use;
the name of your network operator will be
displayed.
Switch off the phone whenever a SIM card is
not in use. Otherwise, messages from other
functions cannot be displayed and the radio
controls in the steering wheel keypad cannot
be used.
228
To switch the phone on
– Turn the ignition key to position I.
– Press the button marked in the illustration.
To switch the phone off
– Press the same button for three seconds.
If you switch off the car’s ignition while the
phone is switched on, it will be on the next
time you switch on the ignition.
Phone calls cannot be received if the phone
is switched off.
to deactivate the phone.
10 Infotainment system
Call options
Display
The car audio system will be muted automatically while a phone conversation is in
progress. Refer to menu function 5.6.5 on
page 238 for information about audio system
volume levels.
Privacy handset
10
Ending a call
To end a call, press
on one of the keypads or hang up the handset. The audio system resumes its previous mode.
Last dialled numbers
The phone automatically stores the last
phone numbers/names called.
The display will show the function in use, for
example menu selections, messages, phone
numbers or settings.
Making and receiving calls
To dial
Dial the number and press
on the steering wheel or centre console keypad (or lift the
handset).
To receive an incoming call
Press
(or lift the handset). You can also
use Automatic Answer. See menu
function 4.3.
– Press
on the steering wheel or centre
console keypad.
– Use the arrows to scroll forward
or
backward
through the last numbers
dialled.
– Press
(or lift the privacy handset) to
make the call.
If you wish to talk undisturbed, use the privacy handset.
– Lift the handset.
– Dial the number on the centre console
keypad.
– Press
to dial.
Adjust the volume with the dial on the side of
the handset. The call is ended when you replace the handset in its holder.
If you wish to switch to handsfree
without ending the call
– Press
and select Handsfree.
– Press
and put the handset down, see
page 229.
229
10 Infotainment system
Call options
Speed dial
10
Storing speed dial numbers
A number stored in the phone book can be
linked to a speed dial button (1-9) as follows:
– Scroll with
to Edit memory (menu 3)
and press
.
– Scroll to Speed dial (Menu 3.4) and
press
.
– Choose the digit that is to be the speed
dial number. Press
to confirm.
– Find the desired name or phone number in
the memory and press
to select it.
Using speed dial
Press the desired speed dial button for
about two seconds to make a call.
NOTE
Once you switch on the phone, wait a moment before using speed dial. If you wish to
use a speed dial number, Menu 4.5 must be
activated, see page 217.
Functions during a call
The following functions are available during
a call:
– Scroll with the arrows and press YES to
make a selection.
Secret mode/
Secret mode off
Secret mode
Hold/Don’t hold
Choose whether or
not the call is to be
put on hold
Use the handset or
handsfree
Show stored
numbers
Handset/Handsfree
Memory
The following functions are available when
you have a current call and a parked call:
– Scroll with the arrows and press YES to
make a selection.
Secret mode/
Secret mode off
Secret mode
Handset/Handsfree
Use the handset or
handsfree
Show stored
numbers
Speak with both
parties simultaneously (conference
call)
Switch between the
two calls
Memory
Three-way calling
Switch
The following functions are available when
you have selected Three-way calling and
have two calls in progress:
– Scroll with the arrows and press YES to
make a selection.
Secret mode/
Secret mode off
Secret mode
Handset/Handsfree
Use the handset or
handsfree
Show stored
numbers
Memory
230
10 Infotainment system
Call options
Call waiting
If you hear a tone in the speaker when the
phone is engaged followed by a two-tone
signal, another party is placing a call to your
phone. The two-tone signal will repeat until
you answer the call or ringing ceases. When
this occurs, you may accept or decline the
call.
10
If you do not wish to take the call, press
or do nothing. If you do wish to take the call,
press
. Your current call will be put in
"park mode". If you press
, both calls will
be terminated.
SMS
A single two-tone signal indicates that you
have received an SMS message.
Volume
Raise the volume with the (+) button in the
steering wheel keypad. Lower the volume
with the (–) button.
When the phone is activated, the steering
wheel keypad only controls the phone functions.
If you wish to adjust radio settings using
these buttons you must first deactivate the
phone, see page 228.
231
10 Infotainment system
Memory functions
10
Storing in the memory
Enter a name (or message)
Phone numbers and names can be stored in
either the phone memory or the SIM card
memory.
Press the button with the desired character:
once for the first character, twice for the second, etc. Press 1 to enter a space.
space 1- ? ! , . : ' ( )
abc2äåàáâæç
When you accept a phone call from a party
whose number is stored in the memory, their
name will be shown in the display.
def3èéëê
The phone memory can store up to
255 names.
jkl5
Storing phone numbers with names
mno6ñöòóØ
– Press
and toggle to Edit memory
(Menu 3). Press
.
pqrs7ß
– Scroll to Add (Menu 3.1) and press
– Enter a number and press
– Enter a name and press
.
.
– Choose in which memory to save with
and press
.
ghi4ìíîï
tuv8üùúû
.
wxyz9
if you enter two letters in a row
from the same button, press *
between them or wait a few
seconds
[email protected]*#&$£/%
change between capital and lower
case letters
delete the last letter or number
entered. If you press for a long
time, the enter number or text is
deleted.
232
10 Infotainment system
Memory functions
Dialling from the memory
– Press
in the centre console or in the
steering wheel keypad.
Choose from the following alternatives:
10
– Press
in the centre console or in the
steering wheel keypad and browse with
the arrows until you locate the required
name.
– Press the key of the first letter in the name
(or enter the name) and press
.
– Press
to dial the selected number.
233
10 Infotainment system
Menu functions
Menu function
10
Use the menu function when checking functions, changing settings and programming
new functions in your system. The various
menu selections will be shown in the display.
Press
to access the menu function.
The following applies in the menu function:
• A long press on
means you exit the
menu function.
• A short press on
means that you
retract, cancel or reject an alternative.
• A press on
means that you confirm or
select, or that you scroll from a submenu
to the next submenu.
• The right arrow
leads to the next side
menu.
• The left arrow
leads to the previous
side menu.
Shortcuts
The menu options are numbered and can be
selected directly using the number keys
and
. The numbers are shown in the display together with the menu option.
Traffic safety
For reasons of safety, the menu system cannot be accessed at speeds in excess of
8 km/h. You may only complete activities in
234
the menu system that have already been
started.
The speed limiter can be disconnected using
menu function 5.7.
Main menus/submenus
1. Call register
1.1. Missed calls
1.2. Received calls
1.3. Dialled calls
1.4. Erase list
1.4.1.
All
1.4.2.
Missed
1.4.3.
Received
1.4.4.
Dialled
1.5. Call duration
1.5.1.
Last call
1.5.2.
Number of calls
1.5.3.
Total time
1.5.4.
Clear
2. Messages
2.1. Read
2.2. Write
2.3. Voice message
2.4. Settings
2.4.1.
SMSC number
2.4.2.
Validity
2.4.3.
Type
10 Infotainment system
Menu functions
3. Edit memory
3.1. Enter item
3.2. Search
3.2.1.
Edit
3.2.2.
Erase
3.2.3.
Copy
3.2.4.
Move
3.3. Copy all
3.3.1.
SIM to phone
3.3.2.
Phone to SIM
3.4. Speed dial
3.5. Empty SIM
3.6. Empty memory
3.7. Status
4. Call options
4.1. Transmit number
4.2. Call waiting
4.3. Automatic answer
4.4. Automatic redial
4.5. Speed dial
4.6. Call divert service
4.6.1.
All calls
4.6.2.
When busy
4.6.3.
When not answered
4.6.4.
Not available
4.6.5.
Fax calls
4.6.6.
Data calls
4.6.7.
Cancel all diverts
5. Settings
5.1. Factory settings
5.2. Network selection
5.3. Language
5.3.1.
English UK
5.3.2.
English US
5.3.3.
Svenska
5.3.4.
Dansk
5.3.5.
Suomi
5.3.6.
Deutsch
5.3.7.
Nederlands
5.3.8.
Français FR
5.3.9.
Français CAN
5.3.10. Italiano
5.3.11. Español
5.3.12. Português P
5.3.13. Português BR
5.4. SIM security
5.4.1.
On
5.4.2.
Off
5.4.3.
AUTO
5.5. Change codes
5.5.1.
PIN code
5.5.2.
Phone code
5.6. Volume
5.6.1.
Ringer volume
5.6.2.
Ring signal
5.6.3.
Button click
5.6.4.
Speed volume
5.6.5.
Radio Auto Suppression
5.6.6.
New SMS
5.7. Traffic safety
10
235
10 Infotainment system
Menu functions
Menu options, description
10
1. Call register
1.1. Missed calls
A list of missed calls is shown here. You can
choose to call, erase or store the number in
the phone or SIM card memory for later use.
1.2.
Received calls
A list of received calls is shown here. You can
choose to call, erase or store the number in
the phone or SIM card memory for later use.
1.3.
Dialled calls
A list of dialled numbers is shown here. You
can choose to call, erase or store the number
in the phone or SIM card memory for later
use.
1.4.
Erase list
This option can be used to erase the list of
menus 1.1, 1.2 and 1.3 as follows.
1.4.1.
All
1.4.2.
Missed
1.4.3.
Received
1.4.4.
Dialled
1.5. Call duration
Here you can see the duration of all your calls
or the most recent. You can also see the
number of calls and clear the call timer.
1.5.1.
236
Last call
1.5.2.
1.5.3.
1.5.4.
Number of calls
Total time
Clear
Resetting the call timer requires the phone
code (see Menu 5.5).
2. Messages
2.1. Read
3.2.
Write
You can write a text message using the keypad. Then choose to save or send it.
2.3.
Voice message
Listen to received messages.
2.4.
Settings
Enter the number (SMSC number) of the
message centre to which you want your messages transferred. Specify how the message
is to reach the addressee and how long it is
to be stored in the message centre.
2.4.1.
2.4.2.
2.4.3.
You can store names and phone numbers in
the phone or SIM card memory. See the section on memory functions for more information.
Search
Changes in the memory can be made here.
Here you can read received text messages.
You can then choose to erase the message,
forward it, change or save the entire message or parts of it.
2.2.
3. Edit memory
3.1. Enter item
SMSC number
Validity
Type
Contact your service provider for information
on these settings and for an SMSC number.
3.2.1.
Edit: Change data in the
different memories.
3.2.2.
Erase: Remove a saved
name.
3.2.3.
Copy: Copy a saved name.
3.2.4.
Move: Transfer information
between the memory of
the phone and the SIM
card.
3.3. Copy all:
Copy phone numbers and names from the
SIM card to the phone memory.
3.3.1.
From SIM to phone
memory
3.3.2.
From phone to SIM
memory
3.4. Speed dial
A number stored in the phone book can be
stored as a speed dial number.
10 Infotainment system
Menu functions
3.5.
Empty SIM
The entire memory of the SIM card can be
erased.
3.6.
Empty memory
The entire memory of the phone can be
erased.
3.7.
Status
See how many places in the SIM card or
phone memory are occupied by names and
numbers.
4. Call options
4.1. Transmit number
Select whether or not your own number
should be displayed to the person you call.
Contact your network operator regarding
permanently withheld numbers.
4.2.
Automatic answer
Chose to answer without using the keypad.
4.4.
Speed dial
4.6.
Diversions
Here you can choose when and what type of
calls are to be diverted to a specified phone
number.
4.6.1.
4.6.2.
4.6.3.
4.6.4.
4.6.5.
4.6.6.
4.6.7.
All calls (this setting only
applies during the call in
progress).
When busy
When not answered
Not available
Fax calls
Data calls
Cancel all diverts
Call waiting
Choose whether or not you want to be alerted during a phone call that there is another
call coming in.
4.3.
4.5.
Here you set whether or not speed dial is to
be active. The function must be activated if
you wish to dial using speed dial numbers.
Automatic redial
Choose to call a previously dialled number
that was busy.
5. Settings
5.1. Factory settings
Function to return to the system’s factory
settings.
5.2.
Network selection
Choose a network automatically or manually.
5.2.1.
5.2.2.
AUTO
Manual
5.3.
Language
Here you can choose which language the
phone is to display.
10
5.3.1.
English UK
5.3.2.
English US
5.3.3.
Svenska
5.3.4.
Dansk
5.3.5.
Suomi
5.3.6.
Deutsch
5.3.7.
Nederlands
5.3.8.
Français FR
5.3.9.
Français CAN
5.3.10. Italiano
5.3.11. Español
5.3.12. Português P
5.3.13. Português BR
5.4. SIM security
Choose if the PIN code is to be on, off, or automatic.
5.4.1.
On
5.4.2.
Off
5.4.3.
AUTO
5.5. Change codes
Change the PIN code or phone code.
5.5.1.
PIN code
237
10 Infotainment system
Menu functions
5.5.2.
10
Phone code (use 1234 until
you change to your own
code). The phone code is
used to reset the call timer.
NOTE
Make a note of your code as save it in a safe
place.
5.6. Volume
5.6.1.
Ringer volume: Here you
can choose the volume of
the ringer for incoming
calls.
5.6.2.
Ring signal: You have eight
different types of ring
signals to choose from.
5.6.3.
Button click: On or Off.
5.6.4.
Speed volume: Choose
whether the volume should
be adjusted according to
speed.
5.6.5.
Radio Auto Suppression:
Here you choose whether
or not the volume of the
radio should remain the
same during phone calls.
238
5.6.6.
5.7.
New SMS: Select whether
or not you wish the phone
to notify of new SMS
messages with an audible
signal.
Traffic safety
Here you can choose to disengage the speed
limiter for the menu system, i.e. choose to
use the menu system even while driving.
10 Infotainment system
Miscellaneous information
Radio/Phone
Double SIM cards
Specifications
Output
SIM card
Memory entries
SMS
(Short Message Service)
Data/Fax
Dualband
2W
Small
10
2551
Yes
No
Yes (900/1800)
1The phone memory contains 255 positions. The
number of SIM card memory positions varies
depending on your subscription.
IMEI number
The four lower buttons on the steering wheel
keypad are common to the audio system and
phone.
The phone must be in active mode in order to
adjust the phone functions with these buttons, see page 228.
Many network operators offer double SIM
cards - one for your car and one for another
phone. A double SIM card allows you to have
the same number for two different phones.
Ask your network operator about the options
available and the use of double SIM cards.
To block the phone, you must provide your
network operator with the phone’s IMEI
number. This is a 15-digit serial number that
is programmed in the phone.
– Dial *#06# to show this number in
the display.
Make a note of this number and keep it in a
safe place.
If you wish to adjust radio settings using
these buttons you must first deactivate the
phone.
– Press
.
239
Type designation .................................................................................... 242
Dimensions and weights ....................................................................... 243
Engine specifications ............................................................................. 244
Engine oil ................................................................................................ 246
Fluids and lubricants .............................................................................. 249
Fuel ......................................................................................................... 250
Catalytic converter ................................................................................. 253
Electrical system .................................................................................... 254
240
SPECIFICATIONS
11
11 Specifications
Type designation
11
Knowing the car’s type designation, vehicle
identification and engine numbers can facilitate all contact with a Volvo dealer regarding
the car and when ordering spare parts and
accessories.
1. Type designation, vehicle identification
number, maximum permissible weights,
codes for colour and upholstery and type
approval number.
2. Decal for parking heater.
3. Engine type designation, component
and serial number.
4. The engine oil decal (certain engine
variants) specifies oil grade and viscosity.
5. Gearbox type designation and serial
number.
a: Manual gearbox.
b: Automatic gearbox AW.
6. VIN number (type and model year designation plus chassis number)
242
11 Specifications
Dimensions and weights
Dimensions (cm)
Length
460 (R: 461)
Width
180
Height
143
Wheelbase
272
Front track
156
Rear track
156
11
Weights
Kerb weight includes the driver, the weight of
the fuel tank when filled to 90 % and various
fluids, such as washer fluid and coolant.
The weight of passengers and accessories,
such as a towbar, load carriers, space box
etc. and towball load (when a trailer is
hitched, see table), influences the payload
and must not be included in the kerb weight.
Permitted weight (in addition to driver) =
Gross vehicle weight – Kerb weight.
WARNING
The car’s driving characteristics change depending on how heavily it is loaded and how
the load is distributed.
Only for China
1.
2.
3.
4.
Max. total weight
Max. train weight (car+trailer)
Max. front axle load
Max. rear axle load
1. Max. total weight
2. Max. trailer weight
Maximum load: See registration document.
Maximum roof load: 100 kg
Trailer with brakes:
Maximum trailer
weight (kg)
Maximum
towball load
(kg)
0-1200
50
1201-1600
75
Trailer without brakes
Maximum trailer
weight kg
750
Maximum
towball load
kg
50
243
11 Specifications
Engine specifications
11
2.4
BIFUEL (CNG)
2.4
2.0T
2.5T
2.4T
Engine designation
B5244S2
B5244SG
B5244S
B5204T5
B5254T2
B52 44T41
Output (kW/rpm)
103/4500
103/5800
125/6000
132/5500
154/5000
162/5500
(hp/rpm)
140/4500
140/5800
170/6000
180/5500
210/5000
220/5500
Torque (Nm/rpm)
220/3300
192/4500
225/4500
240/2600-5000
320/1500-4500
350/2100-4000
No. of cylinders
5
5
5
5
5
5
Bore (mm)
83
83
83
81
83
81
93.2
Stroke (mm)
Swept volume (litres)
Compression ratio
1
90
90
90
77
93.2
2.44
2.44
2.44
1.98
2.52
2.4
10.3:1
10.3:1
10.3:1
9.5:1
9.0:1
8.5:1
Thailand, Malaysia
Engine type designation, component and serial number can be read on the engine, see
page 242.
244
11 Specifications
Engine specifications
Engine designation
T5
R
D
2.4D
D5
B5244T5
B5254T4
D5244T7
D5244T5
D5244T4
136/4000
Output (kW/rpm)
191/5500
220/5500
92/4000
120/5500
(hp/rpm)
260/5500
300/5500
126/4000
163/5500
185/4000
350/2100-5000
400/1950-5250
300/1750-2250
340/1750-2750
400/2000-2750
Torque (Nm/rpm)
No. of cylinders
5
5
5
5
5
Bore (mm)
81
83
81
81
81
Stroke (mm)
93.2
93.2
93.2
93.2
93.2
Swept volume (litres)
2.40
2.52
2.40
2.40
2.40
Compression ratio
8.5:1
8.5:1
17.0:1
17.0:1
17.0:1
11
Engine type designation, component and serial number can be read on the engine, see
page 242.
245
11 Specifications
Engine oil
Adverse driving conditions
IMPORTANT
Check the oil level more frequently for long
journeys:
11
•
•
•
•
towing a caravan or trailer
in mountainous regions
at high speeds
in temperatures colder than –30 °C or
hotter than +40 °C.
This can produce abnormally high oil temperature or oil consumption.
Also check the oil level more often if the
car is often driven short distances (less
than 10 km) when temperatures are low
(below +5 °C).
Choose a fully synthetic engine oil for adverse driving conditions. It provides extra
protection for the engine.
Volvo recommends
products.
246
oil
In order to fulfil the requirements for the engine’s service intervals all engines are filled
with a specially adapted synthetic engine oil
at the factory. The choice of oil has been
made very carefully with regard to service
life, starting characteristics, fuel consumption and environmental impact.
An approved engine oil must be used in
order that the recommended service intervals can be applied. Only use a prescribed
grade of oil (see the engine compartment
decal) for both filling and oil change, otherwise you will risk affecting service life, starting characteristics, fuel consumption and
environmental impact.
Volvo Car Corporation disclaims all warranty liability if engine oil of the prescribed
grade and viscosity is not used.
Viscosity chart
11 Specifications
Engine oil
Oil decal
When the oil decal shown alongside here is in
the car’s engine compartment, the following
applies. See location on page 242.
Oil grade: ACEA A1/B1
Viscosity: SAE 5W–30
When driving under adverse conditions, use
ACEA A5/B5 SAE 0W-30.
Engine variant
Bi-fuel
B5244SG
R
B5254T4
1Including
Volume between MIN–MAX (litres)
11
Volume1
(litres)
5.8
1.2
5.5
filter change.
247
11 Specifications
Engine oil
Oil decal
When the oil decal shown alongside here is in
the car’s engine compartment, the following
applies. See location on page 242.
Oil grade: ACEA A5/B5
Viscosity: SAE 0W–30
11
Engine variant
2.0T
Volume between MIN–MAX (litres)
Volume1
(litres)
B5204T5
B5244S
2.4
B5244S2
2.4T
B5244T42
T5
B5244T5
2.5T
B5254T2
D5
D5244T4
2.4D
D5244T5
D
D5244T7
1 Including
2
248
filter change.
Thailand, Malaysia
1.2
5.5
2.0
6.2
11 Specifications
Fluids and lubricants
Volume
(litres)
Fluid
System
Gearbox oil
Manual 5 speed (M56/M58)
Manual 6-speed (M66)
Automatic gearbox (AW55-50, AW55-51)
Automatic gearbox (TF-80SC)
2.1
2.0
7.2
7.0
Petrol engine without turbo
Petrol engine with turbo
Diesel
8.0
9.0
12.5
Coolant
Air conditioning1
Brake fluid
Power steering
Washer fluid
1
0.6
0.9
0.2
4.5
6.4
System:
of which reservoir
without high-pressure washing
with high-pressure washing
Recommended oil grade
Transmission fluid MTF 97309
11
Transmission fluid JWS 3309
Coolant with corrosion inhibitor mixed with water, see packaging.
The thermostat starts opening at: 90 ºC in petrol engines and
at 82 ºC in diesel engines.
Oil: PAG
Refrigerant R134a (HFC134a)
DOT 4+
Power steering fluid: WSS M2C204-A or equivalent product.
Use a washer antifreeze recommended by Volvo, mixed with water
for temperatures below freezing.
Weights can vary depending on the engine variant. Contact an authorised Volvo workshop for the exact information.
IMPORTANT
The recommended transmission fluid must
be used to prevent damage to the gearbox.
Do not mix with any other transmission fluid. If the transmission is topped up with a
different fluid, contact an authorised Volvo
workshop for servicing.
NOTE
Under normal driving conditions the gearbox oil does not need changing during its
service life. However, it may be necessary
under adverse driving conditions, see
page 246.
249
11 Specifications
Fuel
Consumption, emissions and volume
Engine
2.4
B5244S2
11
Bi-fuel
2.4
2.0T
2.5T
B5244SG
B5244S
B5204T5
B5254T2
AWD
250
Emissions of CO2
(g/km)
Tank volume
(litres)
Manual 5 speed (M56)
8.8
209
70
Automatic gearbox (AW55-51)
9.5
226
Manual 5 speed (M56)
8.7
208
Automatic gearbox (AW55-50)
9.5
228
Manual 5 speed (M56)
8.9
212
Automatic gearbox (AW55-51)
9.5
226
Manual 5 speed (M56)
8.9
212
Automatic gearbox (AW55-51)
9.5
227
Manual 5 speed (M56)
9.1
217
Automatic gearbox (AW55-51)
9.8
234
Manual 5-speed (M58)
9.7
232
Automatic gearbox (AW55-51)
10.2
244
30
70
70
70
72
2.4T
B5244T41
–
–
–
70
T5
B5244T5
Manual 6-speed (M66)
9.3
220
70
Automatic gearbox (AW55-51)
9.8
234
Manual 6-speed (M66)
10.5
252
Automatic gearbox (TF-80SC)
10.9
259
R
1
Consumption
litre/100 km
Gearbox
B5254T4
Certain countries
68
11 Specifications
Fuel
Engine
D5
2.4D
D
Gearbox
D5244T4
D5244T5
D5244T7
Consumption
litre/100 km
Emissions of CO2
(g/km)
Tank volume
(litres)
Automatic gearbox (TF-80SC)
7.5
199
70
Manual 6-speed (M66)
6.6
174
Automatic gearbox (TF-80SC)
7.5
199
Manual 6-speed (M66)
6.6
174
Manual 5 speed (M56)
6.4
169
Manual 5 speed (M56)
6.4
169
11
251
11 Specifications
Fuel
Fuel consumption and emissions of
carbon dioxide
11
Official fuel consumption figures are based
on a standard driving cycle in accordance
with EU Directive 80/1268 comb. Fuel consumption figures may change if the car is
equipped with extra equipment that affects
the car’s weight. The manner in which the car
is driven and other non-technical factors can
also affect fuel consumption. Consumption is
higher and power output lower for fuel with
an octane rating of 91 RON.
Petrol
Most engines can be run with octane ratings
of 91, 95 and 98 RON.
• 91 RON must not be used for 4-cylinder
engines and should only be used in exceptional cases with other engines.
• 95 RON can be used for normal driving.
• 98 RON is recommended for optimum
performance and minimum fuel consumption.
When driving in temperatures above +38 ºC,
it is recommended to use fuel with the highest possible octane rating for optimum performance and fuel economy.
Petrol – Norm EN 228
IMPORTANT
Use only unleaded petrol to avoid damaging the catalytic converter. In order for the
Volvo warranty to apply, never mix alcohol
with petrol, the fuel system could be
damaged.
Diesel
The diesel engine’s fuel system is sensitive to
contaminants. Only use diesel from wellknown oil companies, see page 179.
Diesel – Norm EN 590 or JIS K2204
252
11 Specifications
Catalytic converter
General
The purpose of the catalytic converter is to
purify exhaust gases. It is located in the flow
of exhaust gases close to the engine so that
it quickly reaches operating temperature. The
catalytic converter consists of a monolith
(ceramic or metal) with channels. The channel walls are lined with a thin layer of platinum, rhodium and palladium. These metals
act as catalysts, i.e. they participate in and
accelerate a chemical reaction without being
used up themselves.
11
Lambda-sondTM oxygen sensor
The Lambda-sond is part of a control system
intended to reduce emissions and improve
fuel economy.
An oxygen sensor monitors the oxygen content of the exhaust gases leaving the engine.
This value is fed into an electronic system
that continuously controls the injection
valves. The ratio of air to fuel is continuously
adjusted. These adjustments create optimal
conditions for efficient combustion, and together with the three-way catalytic converter
reduce harmful emissions (hydrocarbons,
carbon monoxide and nitrous oxides).
253
11 Specifications
Electrical system
General
12 V system with a voltage-regulated alternator. Single pole system in which the chassis
and engine block are used as conductors.
11
Battery
Voltage
12 V
Cold start capacity (CCA)
Reserve capacity (RC)
12 V
590 A
600 A
1
700 A2
100 min
120 min
135 min
60
70
80
Capacity (Ah)
1
Cars equipped with High Performance audio system.
2
Cars equipped with diesel, keyless drive, audio system Premium Sound, fuel-driven heater
or RTI.
If the battery is changed, replace it with a
battery of the same cold start capacity and
reserve capacity as the original (see the decal
on the battery).
254
12 V
11 Specifications
Electrical system
Bulbs
Lighting
Output W
Socket
Dipped beam
55
H7
Bi-Xenon
35
D2S
Main beam
55
HB3
Brake lights, reversing lamps, rear fog lamp
21
BA15s
Direction indicators, rear/front (yellow)
21
BAU15s
Rear position/parking lamps, rear side marker lamps
5
BAY15d
Courtesy lighting, cargo area lighting, number plate
lighting
5
SV8.5
Vanity mirror
1.2
SV5.5
5
W 2.1 x 9.5d
Direction indicators in door mirrors (yellow)
5
W 2.1 x 9.5d
Fog lamps
55
H11
Glovebox lighting
3
BA9
Front position/parking lamps, front side marker lamps
11
255
11 Specifications
11
256
11 Specifications
11
257
Alphabetical index
A
ABS ...........................................................123
ABS fault ................................................42
AC .........................................................72, 75
Active Bi-Xenon Lights, ABL .......................47
Active chassis .............................................45
Active chassis – FOUR-C ..........................127
Active Yaw Control ...................................125
Adaptive system .......................................119
Additional heater .........................................79
Air conditioning .....................................72, 75
ECC ........................................................74
general ...................................................70
Air distribution .............................................77
ECC ........................................................75
Air distribution, A/C .....................................73
Airbag
deactivation ............................................20
driver’s and front passenger side ..........16
Alarm
arming ..................................................104
automatic alarm activation ...................104
deactivating a triggered alarm .............104
disarming .............................................104
general .................................................104
indicator lamp ......................................105
Alarm detectors ...........................................46
All-wheel drive ...........................................122
Audio functions
HU-450/650/850 ..................................209
258
Audio HU-450, overview .......................... 206
Audio HU-850, overview .......................... 208
AUTO CLIMATE .......................................... 74
Automatic car wash .................................. 168
Automatic dimming .................................... 61
Automatic gearbox ................................... 119
safety systems .................................... 119
towing and recovery ............................ 130
trailer ................................................... 133
W-button ............................................. 122
Automatic locking ....................................... 99
Auxiliary lamps ........................................... 46
Average fuel consumption .......................... 52
B
Backrest rear seat, tipping ......................... 91
Battery
care ..................................................... 185
jump starting ....................................... 132
overload ............................................... 111
replacement ........................................ 186
replacing the battery in the remote
control ................................................... 98
symbols on the battery ........................ 186
Blind spot (BLIS) ....................................... 149
BLIS .................................................... 45, 149
Bonnet ...................................................... 178
Booster cushion
lowering ................................................. 32
raising .................................................... 31
Booster cushion, integrated ....................... 31
Boot lid
automatic locking .................................. 99
driving with open boot lid .................... 110
locking/unlocking ................................... 96
Bottle holder for rear seat passengers ....... 89
Brake fluid, checking and topping up ....... 183
Brake system .................................... 123, 183
Brakes, handbrake ...................................... 56
Bulb holder
location of the bulbs ............................ 193
number plate lighting ........................... 192
removal ................................................ 193
Bulbs
replacement ......................................... 188
specifications ....................................... 255
C
Car care, leather upholstery ..................... 170
Car upholstery .......................................... 169
Car wash ................................................... 168
Cargo area
bag holder .............................................. 92
loading ................................................. 142
locking ................................................... 46
Cassette player, HU-450 .......................... 220
Catalytic converter .................................... 253
recovery ............................................... 130
CD changer, external ................................ 223
CD player, HU-650 ................................... 221
Checks
fluids and oils ....................................... 180
Alphabetical index
Child
child seats and airbags ..........................27
Child seat
fixture system .........................................33
installation ..............................................33
Children
child safety locks .................................103
child seats and side airbags ..................21
position in car, table ...............................29
safety .....................................................31
safety equipment ...................................27
Cigarette lighter ...........................................46
Cigarette lighter socket, rear seat ...............57
Clean inside and out .....................................8
Cleaning
automatic car wash ..............................168
car wash ...............................................168
leather upholstery ................................169
seatbelts ...............................................170
upholstery ............................................169
water-repellent surface ........................169
Climate control settings
AUTO .....................................................74
Climate control, general ..............................70
Clock ...........................................................41
setting the clock .....................................40
Clutch fluid, checking and topping up ......183
Coat hanger ................................................89
Collision
collision sensors ....................................23
inflatable curtain .....................................23
Collision, see Collision ............................... 23
Colour code, paint .................................... 171
Combined instrument panel ....................... 40
Compass .................................................... 61
calibration .............................................. 63
setting the zone ..................................... 62
Condensation ........................................... 179
Coolant, checking and topping up ........... 182
Coolant, filling ........................................... 182
Cooling system ......................................... 112
Cruise control ............................................. 55
D
Deadlocks ........................................... 46, 102
temporary deactivation ....................... 102
Defroster ..................................................... 73
rear window ........................................... 73
Defroster, door mirrors ............................... 73
Designation of dimensions ....................... 154
Diesel ........................................................ 179
Diesel filter ................................................ 179
Diesel particle filter ................................... 115
Dipped beam .............................................. 49
Direction indicators .................................... 51
Display, messages ..................................... 44
Door mirrors ............................................... 64
defrosting .............................................. 64
Driveable punctured tyres ........................ 162
Driver’s door control panel ......................... 58
Driving
adverse driving conditions .................. 180
cooling system ..................................... 112
economical .......................................... 110
in water ................................................ 111
slippery driving conditions ................... 110
with open boot lid ................................ 110
with trailer ............................................ 133
Driving in water ......................................... 111
DSTC, see also stabiliser system ............... 45
symbol ................................................... 43
DSTC, see also Stability control system ... 125
DSTC, see also Stability system
deactivating/activating ......................... 125
symbol ................................................... 43
E
ECC, electronic climate control .................. 70
ECO pressure
fuel economy ....................................... 157
table ..................................................... 158
Economical driving ................................... 110
Electrical socket
centre console ................................. 46, 47
rear seat ................................................. 57
Electronic immobiliser ................................. 96
Emissions .................................................. 250
carbon dioxide ..................................... 252
Emissions system
fault indicator ......................................... 43
Emissions system, fault indicator ............... 42
Engine ....................................................... 178
Engine compartment ................................ 178
259
Alphabetical index
Engine oil ...................................................180
adverse driving conditions ...................246
capacities .............................................247
changing ..............................................180
filter ......................................................180
oil grade ...............................................246
oil pressure ............................................42
Engine specifications ................................244
Expectant mothers, safety ..........................13
F
Fan
AC ..........................................................73
ECC ........................................................75
Floor mats ...................................................82
Fluids and oils
checks ..................................................180
Fluids, capacities ......................................249
FOUR-C – Active chassis ..........................127
Front seats, heated .....................................48
Fuel
consumption ........................................250
fuel consumption, display ......................52
fuel economy .......................................157
fuel filter ...............................................179
fuel system ...........................................179
parking heater ........................................79
refuelling ...............................................113
Fuel filler flap, emergency opening ...........114
Fuel gauge ..................................................40
Functions during a call ..............................230
260
Fuses
box in cargo area ................................ 201
box in engine compartment ................ 196
box in passenger compartment .. 198, 199
changing .............................................. 195
general ................................................. 195
G
Gearbox
automatic ............................................ 119
manual ................................................. 118
Glovebox .................................................... 89
locking ................................................. 102
Gross vehicle weight ................................ 243
H
Handbrake .................................................. 56
Hazard warning flashers ............................. 47
Head restraint
centre seat, rear .................................... 90
Head restraints
lowering ................................................. 46
Headlamp pattern ..................................... 144
Headlamps ............................................... 188
headlamp washers ................................ 54
off/on ..................................................... 49
Heating
front seats ....................................... 72, 75
Home safe lighting ...................................... 51
HU-450, overview ..................................... 206
HU-850, overview ..................................... 208
I
Ignition keys .............................................. 116
IMEI number ............................................. 239
Immobiliser ......................................... 96, 116
"Important!" texts .......................................... 6
Indicator lamp ........................................... 105
Instrument lighting ...................................... 49
Instrument overview
left-hand drive car .................................. 36
right-hand drive car ............................... 38
Integrated booster cushion ......................... 31
Interior lighting ............................................ 84
Interior rearview mirror ................................ 61
Intermittent wiping ...................................... 53
ISOFIX, fixture system ................................ 33
J
Jack .......................................................... 159
Jump starting ............................................ 132
K
Kerb weight ............................................... 243
Key .............................................................. 96
remote control ....................................... 96
Kick-down, automatic gearbox ................ 122
L
Lambda-sond ........................................... 253
Leather upholstery, washing instructions . 170
Levelling .................................................... 134
Alphabetical index
Lighting
Active Bi-Xenon Lights ...........................47
automatic lighting ..................................84
automatic lighting, dipped beam ...........49
bulb replacement, general ...................188
bulbs, specifications ............................255
dipped beam ..........................................49
exterior ...................................................49
headlamp levelling .................................49
home safe lighting ..................................51
in the passenger compartment ..............84
lighting panel ..........................................49
main/dipped beam .................................51
position/parking lamps ..........................49
reading lamps ........................................84
rear fog lamp ..........................................50
switching headlamp pattern right/left-hand
traffic, ABL .............................................47
Lighting, bulb replacement
cargo area ............................................192
courtesy lighting ...................................194
dipped beam ........................................189
direction indicators ......................190, 191
fog lamp ...............................................192
front ......................................................188
location of the bulbs in the bulb holder 193
main beam ...........................................189
parking lamps ......................................190
position lamps ......................................190
rear lamp ..............................................193
side marker lamps ................................191
vanity mirror lighting ............................ 194
Loading
general ................................................. 142
load capacity ....................................... 142
Locking ....................................................... 99
from inside ........................................... 100
from outside .......................................... 99
unlocking ............................................... 99
Lock-up function ...................................... 119
Lubricants, capacities .............................. 249
M
Main beam .................................................. 51
off/on ..................................................... 49
switching and flashing ........................... 51
Main beam "flash" ...................................... 51
Maintenance, rustproofing ....................... 172
Manual gearbox ........................................ 118
Misting
attending to the windows ...................... 70
rear window ........................................... 73
removing with defroster function .... 73, 75
timer function, ECC ............................... 76
N
"Note" texts .................................................. 6
O
Oil pressure, see also Engine oil ................ 42
Outside temperature gauge ....................... 40
Oxyhydrogen gas ..................................... 132
P
PACOS ........................................................ 19
Paint
paintwork damage and touching up .... 171
Paintwork
colour code .......................................... 171
Panel vents ................................................. 71
Parking assistance .............................. 46, 128
sensors for parking assistance ............ 129
Parking brake ........................................ 43, 56
Parking heater
battery and fuel ...................................... 79
general ................................................... 78
parking on a hill ..................................... 78
time setting ............................................ 79
Parking lamps ............................................. 49
Petrol grade .............................................. 252
Phone system ........................................... 226
PI seek ...................................................... 215
Pinch protection, sunroof ........................... 66
Polishing ................................................... 169
Position lamps ............................................ 49
Power seat .................................................. 83
Power steering .......................................... 117
Power steering fluid, checking and
topping up ................................................. 183
Power windows .......................................... 58
blocking ................................................. 59
passenger seat ...................................... 59
rear seat ................................................. 60
Privacy handset ........................................ 229
261
Alphabetical index
R
Radio functions
general .................................................212
HU-450 .................................................213
HU-650/850 .........................................214
Rain sensor .................................................53
Reading lamps ............................................84
Rear window, defrosting .............................48
Rearview mirrors .........................................61
defrosting ...............................................48
door ..................................................46, 64
interior ....................................................61
Recirculation
A/C .........................................................73
ECC ........................................................76
Recovery ...................................................130
Refrigerant ..................................................70
Refuelling
fuel cap ................................................113
refuelling ...............................................113
Relay/fuse box
in cargo area ........................................201
in engine compartment ........................196
in passenger compartment ..........198, 199
Remote control ...........................................96
functions ................................................96
replacing the battery ..............................98
Remote control functions ............................97
Remote control system, type approved ....256
262
Reverse gear inhibitor
five-speed ............................................ 118
Rustproofing ............................................. 172
S
Safety ......................................................... 12
safety systems, table ............................. 26
Seat
power seat ............................................. 83
Seatbelt ...................................................... 12
pregnancy ............................................. 13
seatbelt tensioner .................................. 14
Seatbelt reminder ....................................... 13
Seatbelt tensioner ...................................... 14
Seats
manual setting ....................................... 82
Service locking ......................................... 101
Service programme .................................. 176
Side airbags ................................................ 21
SIM card ................................................... 228
SIM cards, double .................................... 239
SIPS bags ................................................... 21
Soot filter ............................................ 44, 115
SOOT FILTER FULL ................................. 115
Spare wheel .............................................. 159
Temporary spare ................................. 160
Speed classes, tyres ................................ 154
Speed dial ................................................ 230
Speed related power steering .................. 117
Speedometer .............................................. 40
Spin Control ............................................. 125
Spin control ............................................... 125
SRS system
general ................................................... 17
switch .................................................... 20
SST – Self Supporting run flat Tyres ......... 162
Stability control system ............................ 125
Stains ........................................................ 169
Standby mode, phone .............................. 228
Starting from cold, automatic gearbox ..... 119
Starting the engine .................................... 115
STC ........................................................... 125
Steering lock ............................................. 117
Steering wheel
cruise control ......................................... 55
keypad left-hand side ............................ 55
steering wheel adjustment ..................... 56
Stone chips and scratches ....................... 171
Storage compartment ................................. 86
Storage spaces in the passenger
compartment ........................................ 86, 87
Storing radio stations ................................ 213
Sunroof ....................................................... 65
pinch protection ..................................... 66
sunscreen .............................................. 66
Sunscreen, sunroof ..................................... 66
Symbols .................................................... 126
warning symbols .................................... 41
T
Tachometer ................................................. 40
Tank volume ............................................. 250
Alphabetical index
Temperature
actual temperature .................................70
passenger compartment, electronic
climate control .......................................74
passenger compartment, manual climate
control ....................................................72
Tools .........................................................159
Towbar, see Towing equipment ................135
Towing ......................................................130
Towing equipment
general .................................................135
installation ............................................137
removing ..............................................140
specifications .......................................136
Towing eye ................................................130
TPMS – Tyre Pressure Monitoring
System ......................................................161
Traction control .........................................125
Traction control system ............................125
Trailer
cable ....................................................135
driving with a trailer ..............................133
trailer weight ........................................243
Trip computer ..............................................52
Trip meter ....................................................40
Tuning, radio .............................................212
Type approved, remote control system ....256
Type designation .......................................242
Tyre
pressure ...............................................157
Tyres
designation of dimensions .................. 154
direction of rotation ............................. 156
driving characteristics ......................... 154
ECO pressure ...................................... 158
general ................................................. 154
speed classes ...................................... 154
summer and winter wheels ................. 156
tread wear indicators ........................... 155
tyre pressure monitoring ..................... 161
winter tyres .......................................... 155
U
Unlocking
boot lid .................................................. 99
from inside ........................................... 100
from outside .......................................... 99
keyless ................................................... 99
V
Vehicle data .............................................. 176
Ventilation ................................................... 71
Volume, phone ......................................... 231
Washers
for headlamps ........................................ 54
for windscreen ....................................... 54
Washing the car ........................................ 168
Waxing ...................................................... 169
Wheels
fitting .................................................... 164
removing .............................................. 163
Whiplash injury WHIPS ............................... 24
WHIPS ........................................................ 24
child seat/booster cushion .................... 24
Windscreen wipers
rain sensor ............................................. 53
washers ................................................. 54
Windscreen wipers and washers ................ 53
Winter driving ............................................ 115
Winter tyres ............................................... 155
Wiper blades
replacing headlamps ........................... 184
replacing, windscreen .......................... 184
W
Warning lamp
Stability and traction control system ... 125
Warning symbol, AIRBAG system .............. 15
"Warning!" texts ........................................... 6
Warning triangle ....................................... 159
Washer fluid, topping up .......................... 182
263
Volvo. for life
Volvo Car Corporation TP 9014 (English), AT 0648 Printed in Sweden, Göteborg 2006, Copyright © 2000-2006 Volvo Car Corporation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement