Manual 21102586

Manual 21102586
Noise Suppression Products/EMI Suppression Filters > For Automotive > EMIFILr (Capacitor type) for Automotive
Data Sheet
1
For Automotive EMIFILr (Capacitor type) for Automotive
NFE61H Series (2706 Size)
c Dimensions
c Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
0.7±0.2
(2)
(3)
Insertion Loss (dB)
2.6±0.3
(1)
1.6±0.3
0.7±0.2
6.8+0.3
-0.5
NFE61HT330U2A9
NFE61HT680R2A9
10
1.6±0.3
NFE61HT101Z2A9
20
NFE61HT181C2A9
30
40
NFE61HT361C2A9
NFE61HT681D2A9
NFE61HT102F2A9
NFE61HT332Z2A9
50
60
0.1
1
10
100
1000
Frequency (MHz)
(in mm)
c Equivalent Circuit
c Packaging
Input (Output)
(1)
Code
Packaging
Minimum Quantity
L
180mm Embossed Tape
2500
K
330mm Embossed Tape
8000
B
Bulk(Bag)
500
Output (Input)
(3)
GND
(2)
No polarity.
c Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation Resistance (min.)
Operating
Temperature Range
NFE61HT330U2A9p
33pF ±30%
2A
100Vdc
1000M ohm
-55 to +125°C
NFE61HT680R2A9p
68pF ±30%
2A
100Vdc
1000M ohm
-55 to +125°C
NFE61HT101Z2A9p
100pF ±30%
2A
100Vdc
1000M ohm
-55 to +125°C
NFE61HT181C2A9p
180pF ±30%
2A
100Vdc
1000M ohm
-55 to +125°C
NFE61HT361C2A9p
360pF ±20%
2A
100Vdc
1000M ohm
-55 to +125°C
NFE61HT681D2A9p
680pF ±30%
2A
100Vdc
1000M ohm
-55 to +125°C
NFE61HT102F2A9p
1000pF 80/-20%
2A
100Vdc
1000M ohm
-55 to +125°C
NFE61HT332Z2A9p
3300pF 80/-20%
2A
100Vdc
1000M ohm
-55 to +125°C
Number of Circuit: 1
Continued on the following page.
oThis data sheet is applied for CHIP EMIFILr used for Automotive Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.11.8
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > For Automotive > EMIFILr (Capacitor type) for Automotive
Data Sheet
2
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
1. Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance.
2. Be sure to provide an appropriate fail-safe
function on your product to prevent a second damage
that may be caused by the abnormal function or
the failure our product.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP EMIFILr used for Automotive Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.11.8
http://www.murata.com/
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement