CUSTER PRODUCTS LTD. www.custerproducts.com WL120WBAR

CUSTER PRODUCTS LTD.    www.custerproducts.com  WL120WBAR
CUSTER PRODUCTS LTD.
www.custerproducts.com
Mounting bracket instructions for part #s WL36WBAR & WL72WBAR &
WL120WBAR
First, take the small rubber “O”-ring out of package & insert into small groove in each
side of light bar as shown in fig. 1
fig.1
Next, insert the 1” hex head screw into each of the brackets center hole and insert into
light bar and tighten. Then screw into the smaller hole, the small hex head set screw, as
shown in fig.2
fig.2
Last, insert the longer 1-1/4” hex head screw into the foot of the bracket and use the nut
on the other side of whatever you are mounting the light to. Notice the rubber insert in
the picture, at the bottom of the foot in fig.3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement