Þ»º±®» ®»¬«®²·²¹ ¬¸·- °®±¼«½¬ ¬± ¬¸» -¬±®» ±º °«®½¸¿-» ïòèððòééçòîïðî ©©©ò¼»»¦»»ò½±³ñ©¿®®¿²¬§ò°¸°

Þ»º±®» ®»¬«®²·²¹ ¬¸·- °®±¼«½¬ ¬± ¬¸» -¬±®» ±º °«®½¸¿-» ïòèððòééçòîïðî ©©©ò¼»»¦»»ò½±³ñ©¿®®¿²¬§ò°¸°
Þ»º±®» ®»¬«®²·²¹ ¬¸·- °®±¼«½¬
¬± ¬¸» -¬±®» ±º °«®½¸¿-»
ݱ²¬¿½¬ Ü»» Æ»» ·º §±« »¨°»®·»²½» ¬¸» º±´´±©·²¹ °®±¾´»³-æ
ïòèððòééçòîïðî
©©©ò¼»»¦»»ò½±³ñ©¿®®¿²¬§ò°¸°
INSTALLATION INSTRUCTION
SIDE BAR PART#DZ 371211/371212/371213
02-08 DODGE RAM 1500/2500/3500 2/4WD Reg.Cab
PARTS LIST
(2) SIDE TUBES WITH STEPS
(2) FRONT MOUNT BRACKETS
(2) REAR MOUNT BRACKETS
(4) 1/2”-2”x13” hex bolts
(8) 1/2” Flat Washers
(4) 1/2” Split Washers
(4) M12 Split Washers
PROCEDURE
1.
Read and understand the instructions completely before beginning installation
2.
Sidebars set consist of a driver and passenger side bar. Be sure to determine the correct side before
installation.
3. Locate and remove the body mounting bolts from the vehicle as shown in pictures 1 & 2.
4. Assemble the Front and Rear Mount Brackets by using the body mounting bolts as shown in picture 3 &
picture 4. Leave hardware loose.
5. Using the 1/2”-2”x13” hex bolts with respective washers, install the side bars as shown in pictures 5 & 6.
Leave hardware loose.
6. Check to be sure Side Bars are properly aligned with the vehicle body. Tighten the Body mounting bolts
and 1/2” Hex bolts. Repeat for passenger side.
Picture 3
Picture 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement