White-Rodgers 1F83 0471 Thermostat Installation and Operating Instructions

Below you will find brief information for thermostat 1F83-0471. This thermostat is designed to be used for single or multi-stage heating and cooling systems. It offers an automatic heat/cool changeover option. The thermostat has a LCD display and is designed for easy use and installation. You can also set the temperature limit, select the system mode, and control the cycle rate.

PDF Download
Document
Thermostat 1F83-0471 Installation and Operating Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Automatic Heat/Cool Changeover
  • Single Stage, Multi-Stage or Heat Pump
  • LCD display
  • Easy installation
  • Temperature limit settings

Frequently asked questions

To reset the thermostat, remove the wires from terminals R and C (do not short them together) and remove the batteries for 2 minutes. After resetting the thermostat, replace the wires and batteries.

Fan Auto is the most commonly selected setting and runs the fan only when the heating or cooling system is on. Fan On runs the fan continuously for increased air circulation or to allow additional air cleaning.

Press the SYSTEM button to select the desired system setting. You can choose between Heat, Off, Cool, Auto, or Emer.
Preparing document for printing…
0%