Specification Status: Released PolySwitch® PTC Devices

Specification Status: Released PolySwitch® PTC Devices
PolySwitch®
PTC Devices
Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
Fax: 800-227-4866
PRODUCT: TR600-160
DOCUMENT: SCD 22470
PCN: 934973
REV LETTER: N
REV DATE: MAY 15, 2003
PAGE NO.: 1 OF 1
Overcurrent Protection Device
Specification Status: Released
Max Electrical Rating at 20°C
A
Operating Voltage: 250VDC
Fault Voltage: 600VRMS
Interrupt Current: 3ARMS
C
F
Lead Material:
22 AWG Sn/Pb plated copper
B
Marking:
Raychem Logo
and Voltage
600
160
D
Part Identification
E
Lot Identification
CENTER TO CENTER
TABLE I. DIMENSIONS:
A
MIN
---
mm:
in:
B
MAX
16.0
(0.630)
MIN
---
C
MAX
12.6
(0.496)
MIN
---
D
MAX
MIN
6.0
4.7
(0.236) (0.185)
MAX
---
E
NOM
5.0
(0.197)
F
MAX
10.0
(0.394)
TABLE II. PERFORMANCE RATINGS @ 20°C (unless otherwise noted):
IHOLD (A)
20°C
0.160
RESISTANCE (Ω)
60°C
0.100
R1 MAX*
18.0
*Maximum device resistance at 20°C measured 1 hour post trip.
Agency Recognition:
Reference Documents:
Precedence:
Effectivity:
CAUTION:
R MIN
4.0
R MAX
10.0
TIME TO TRIP (s)
@ 1A
TYP
MAX
7.5
18.0
OPERATING
TEMPERATURE (°C)
MIN
MAX
-40
85
UL, CSA
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement