Video to USB adapter, Model VA13A

INSTALLATION AND OPERATING INSTRUCTIONS

IMPORTANT: Use of the VA13A Video to USB adapter requires Windows ® XP, Windows ® Vista, or Windows ® 7.

DO NOT plug the VA13A USB adapter into your PC until you install the X10 software.

1. Download the desired X10 software/drivers from:

www.x10.com/software

2. Run the installation program. Select the directory where the software will be installed, and follow the on screen instructions.

3. When the installation program instructs you to plug in the USB adapter, plug the VA13A into your USB port.

Your computer will recognize that new hardware has been connected and will complete the installation.

4. Plug an XCam camera or Video Receiver (both sold separately) into the VA13A as per their instructions.

® Windows is a Registered Trademark of Microsoft Corporation.

Check Out our Web site at:

www.x10.com

For more information on X10 products and special promotional offers.

X10 Wireless Technology, Inc. LIMITED 1-YEAR WARRANTY

X10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. X10 agrees to repair or replace, at it’s sole discretion, a defective

X10 product if returned to X10 within the warranty period and with proof of purchase.

If service is required under this warranty:

1. Call 1-800-675-3044 or visit www.x10.com, or e-mail [email protected] to obtain a

Return Merchandise Authorization (RMA) number.

2. Return the defective unit postage prepaid to X10 (see address on back).

3. Enclose a check for $4.00 to cover postage and handling.

4. Enclose a dated proof of purchase.

5. X10 is not responsible for shipping damage. Units to be returned should be packed carefully.

Please visit www.x10.com/warranty to complete your on-line warranty registration. Thank you.

For help or more information on setup, please visit: www.x10.com/support

VA13A-9/11

FROM

X10.com, a div. of X10 Wireless Technology, Inc.

400 Forge Way, Suite 409-412, Rockaway, NJ 07866

First Name Last Name

Street Address - No P.O. Box numbers (for U.P.S.)

City State Zip

CONTENTS - MERCHANDISE RETURN POSTAGE GUARANTEED

POSTMASTER: THIS PARCEL MAY BE OPENED FOR POSTAL INSPECTION

X10.com, a division of

X10 Wireless Technology, Inc.

400 Forge Way, Suite 409-412

Rockaway, NJ 07866

Mini Timer MT13A

A Controller, Timer and Alarm Clock all in one! Programs up to eight X10 Modules to go on and off at specifi c times, up to a total of 64 timed events. Controls eight modules instantly. Dims lights too.

Maxi Controller SC503

Lets you control up to 16 X10 Modules at the touch of a button from anywhere in the house. Dims lights too!

Mini Controller MC10A

Lets you control up to eight X10 Modules at the touch of a button from anywhere in the house. Dims lights too!

2-Way Home Control Interface CM15A

Set up from a PC to control up to 256

X10 Modules. ActiveHome Pro software download & USB cable included.

Thermostat Set-Back TH2807

Automatically sets-back your central heating/air conditioning. Mounts on the wall under your existing thermostat and plugs into an Appliance Module.

Wireless Remote Control System RC5000

Lets you control 16 X10 modules from inside or outside your home. Can also dim and brighten Lamp Modules and Wall Switch

Modules. Works with the HR12A PalmPad

Remote and X10 RF Wall Switches (SS13A,

SS15A).

Lamp Module LM465

Can be Dimmed and Brightened from any

X10 Controller. Responds to “All lights on”.

Rated for 300 W. Incandescent only.

2-Way version LM14A.

SocketRocket LM15A

Screws in to an existing light fi xture. Controls up to 150W, incandescent only.

Appliance Module - AM486/AM466

Two pin polarized (AM486) or 3 pin grounded (AM466). For controlling an air conditioner, TV, stereo, etc. anywhere in the home. Rated 15A for heaters, coffee pots etc.; 1/3 H.P. for motors; 400W for TVs;

500W for lamps.

Wall Switch Module WS467

For controlling important indoor and outdoor security lights. Replaces your existing wall switch and installs like a regular dimmer. Dimmed/brightened from any X10

Controller. Rated 500W incandescent only.

3 - Way Wall Switch Module WS4777

For controlling a light which is controlled by two switches. Same features as WS467.

Split Receptacle Module SR227

Replaces existing wall outlet. The top outlet functions like an Appliance Module, the bottom one is a regular outlet. Rated 15A.

Universal Module UM506

Isolated contact relay and beeper. Can be set for momentary or continuous operation.

Not compatible with X10 security systems.