JBL PowerBass PB10, PB12 subwoofers Owner's guide

Below you will find brief information for subwoofers PowerBass PB10, subwoofers PowerBass PB12. These subwoofers are designed to bring the thrill of live performance and movie sound to your home environment. They feature a pure cellulose fiber woofer type and a FreeFlow flared port design. Both models offer a variety of connection options, including line-level and speaker-level inputs.

PDF Download
Document
JBL PowerBass PB10, PB12 Owner's Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 250 Watt Amplifier
  • 12-inch Pure-Cellulose woofer
  • FreeFlow flared port
  • Variable Crossover
  • Line Level & Speaker Level Inputs
  • LFE Switch
  • Phase Switch

Frequently asked questions

Use the line-level inputs and make sure the LFE switch is in the "LFE" position. Connect the subwoofer output on your receiver to the line-level inputs on the subwoofer. Configure your receiver for "Subwoofer On" or "LFE On" and set the front, center, and rear speakers to "Small" or "Large" as needed.

The Phase Control switch determines whether the subwoofer's piston-like action moves in or out of phase with your main speakers. Experiment with both positions to maximize bass output at your listening position.

Yes, you can use either the line-level or speaker-level inputs. For line-level connections, make sure the LFE switch is in the "Normal" position. For speaker-level connections, connect your receiver's front left and right speaker outputs to the "High Level In" terminals on the subwoofer and connect the "High Level Out" terminals to your front speakers.
Preparing document for printing…
0%