Sockets COS 518: Advanced Computer Systems Michael Freedman Fall 2009

Sockets COS 518:  Advanced Computer Systems Michael Freedman Fall 2009
Sockets
COS 518: Advanced Computer Systems
Michael Freedman
Fall 2009
1
Client-Server Communication
• Client “sometimes on”
– Initiates a request to the
server when interested
– E.g., Web browser on your
laptop or cell phone
– Doesn’t communicate
directly with other clients
– Needs to know server’s
address
• Server is “always on”
– Services requests from many
client hosts
– E.g., Web server for the
www.cnn.com Web site
– Doesn’t initiate contact with
the clients
– Needs fixed, known address
2
Client and Server Processes
• Program vs. process
– Program: collection of code
– Process: a running program on a host
• Communication between processes
– Same end host: inter-process communication
• Governed by the operating system on the end host
– Different end hosts: exchanging messages
• Governed by the network protocols
• Client and server processes
– Client process: process that initiates communication
– Server process: process that waits to be contacted
3
Delivering the Data: Division of Labor
• Network
– Deliver data packet to the destination host
– Based on the destination IP address
• Operating system
– Deliver data to the destination socket
– Based on the destination port number (e.g., 80)
• Application
– Read data from and write data to the socket
– Interpret the data (e.g., render a Web page)
4
Socket: End Point of Communication
• Sending message from one process to another
– Message must traverse the underlying network
• Process sends and receives through a “socket”
– In essence, the doorway leading in/out of the house
• Socket as an Application Programming Interface
– Supports the creation of network applications
User process
User process
socket
socket
Operating
System
Operating
System
5
Identifying the Receiving Process
• Sending process must identify the receiver
– The receiving end host machine
– The specific socket in a process on that machine
• Receiving host
– Destination address that uniquely identifies the host
– An IP address is a 32-bit quantity
• Receiving socket
– Host may be running many different processes
– Destination port that uniquely identifies the socket
– A port number is a 16-bit quantity
6
Using Ports to Identify Services
Server host 128.2.194.242
Client host
Service request for
128.2.194.242:80
(i.e., the Web server)
Web server
(port 80)
OS
Client
Echo server
(port 7)
Service request for
128.2.194.242:7
(i.e., the echo server)
Client
Web server
(port 80)
OS
Echo server
(port 7)
7
Port Numbers are Unique per Host
• Port number uniquely identifies the socket
– Cannot use same port number twice with same address
– Otherwise, the OS can’t demultiplex packets correctly
• Operating system enforces uniqueness
– OS keeps track of which port numbers are in use
– Doesn’t let the second program use the port number
8
UNIX Socket API
• Socket interface
– Originally provided in Berkeley UNIX
– Later adopted by all popular operating systems
– Simplifies porting applications to different OSes
• In UNIX, everything is like a file
– All input is like reading a file, output like writing
– File is represented by an integer file descriptor
• API implemented as system calls
– E.g., connect, read, write, close, …
9
Typical Client Program
• Prepare to communicate
– Create a socket
– Determine server address and port number
– Initiate the connection to the server
• Exchange data with the server
– Write data to the socket
– Read data from the socket
– Do stuff with the data (e.g., render a Web page)
• Close the socket
10
Servers Differ From Clients
• Passive open
– Prepare to accept connections
– … but don’t actually establish
– … until hearing from a client
• Hearing from multiple clients
– Allowing a backlog of waiting clients
– ... in case several try to communicate at once
• Create a socket for each client
– Upon accepting a new client
– … create a new socket for the communication
11
Typical Server Program
• Prepare to communicate
– Create a socket
– Associate local address and port with the socket
• Wait to hear from a client (passive open)
– Indicate how many clients-in-waiting to permit
– Accept an incoming connection from a client
• Exchange data with the client over new socket
–
–
–
–
Receive data from the socket
Do stuff to handle the request (e.g., get a file)
Send data to the socket
Close the socket
12
Putting it All Together
Server
socket()
bind()
Client
listen()
accept()
socket()
connect()
block
read()
process
request
write()
write()
read()
13
Client Creating a Socket: socket()
• Creating a socket
– int socket(int domain, int type, int protocol)
– Returns a file descriptor (or handle) for the socket
– Originally designed to support any protocol suite
• Domain: protocol family
– PF_INET for the Internet (IPv4)
• Type: semantics of the communication
– SOCK_STREAM: reliable byte stream (TCP)
– SOCK_DGRAM: message-oriented service (UDP)
• Protocol: specific protocol
– UNSPEC: unspecified
– (PF_INET and SOCK_STREAM already implies TCP)
14
Client: Learning Server Address/Port
• Server typically known by name and service
– E.g., “www.cnn.com” and “http”
• Need to translate into IP address and port #
– E.g., “64.236.16.20” and “80”
• Translating the server’s name to an address
– struct hostent *gethostbyname(char *name)
– Argument: host name (e.g., “www.cnn.com”)
– Returns a structure that includes the host address
• Identifying the service’s port number
– struct servent
*getservbyname(char *name, char *proto)
– Arguments: service (e.g., “ftp”) and protocol (e.g., “tcp”)
– Static config in/etc/services
15
Client: Connecting Socket to the Server
• Client contacts the server to establish connection
– Associate the socket with the server address/port
– Acquire a local port number (assigned by the OS)
– Request connection to server, who hopefully accepts
• Establishing the connection
– int connect (int sockfd,
struct sockaddr *srv_addr,
socketlen_t addrlen)
– Arguments: socket descriptor, server address, and
address size
– Returns 0 on success, and -1 if an error occurs
16
Client: Sending Data
• Sending data
– ssize_t write
(int sockfd, void *buf, size_t len)
– Arguments: socket descriptor, pointer to buffer of
data to send, and length of the buffer
– Returns the number of bytes written, and -1 on
error
17
Client: Receiving Data
• Receiving data
– ssize_t read
(int sockfd, void *buf, size_t len)
– Arguments: socket descriptor, pointer to buffer to
place the data, size of the buffer
– Returns the number of characters read (where 0
implies “end of file”), and -1 on error
– Why do you need len?
– What happens if buf’s size < len?
• Closing the socket
– int close(int sockfd)
18
Server: Server Preparing its Socket
• Server creates a socket and binds address/port
– Server creates a socket, just like the client does
– Server associates the socket with the port number
(and hopefully no other process is already using it!)
– Choose port “0” and let kernel assign ephemeral port
• Create a socket
– int socket (int domain,
int type, int protocol)
• Bind socket to the local address and port number
– int bind (int sockfd,
struct sockaddr *my_addr,
socklen_t addrlen)
– Arguments: sockfd, server address, address length
– Returns 0 on success, and -1 if an error occurs
19
Server: Allowing Clients to Wait
• Many client requests may arrive
– Server cannot handle them all at the same time
– Server could reject the requests, or let them wait
• Define how many connections can be pending
– int listen(int sockfd, int backlog)
– Arguments: socket descriptor and acceptable backlog
– Returns a 0 on success, and -1 on error
• What if too many clients arrive?
– Some requests don’t get through
– The Internet makes no promises…
– And the client can always try again
20
Server: Accepting Client Connection
• Now all the server can do is wait…
– Waits for connection request to arrive
– Blocking until the request arrives
– And then accepting the new request
• Accept a new connection from a client
– int accept(int sockfd,
struct sockaddr *addr,
socketlen_t *addrlen)
– Arguments: sockfd, structure that will provide client
address and port, and length of the structure
– Returns descriptor of socket for this new connection
21
Server: One Request at a Time?
• Serializing requests is inefficient
– Server can process just one request at a time
• May need to time share the server machine
– Alternate between servicing different requests
• Do a little work on one request, then switch when you are
waiting for some other resource (e.g., reading file from disk)
• “Nonblocking I/O”
– Or, use a different process/thread for each request
• Allow OS to share the CPU(s) across processes
– Or, some hybrid of these two approaches
22
Client and Server: Cleaning House
• Once the connection is open
–
–
–
–
Both sides read and write
Two unidirectional streams of data
In practice, client writes first, and server reads
… then server writes, and client reads, and so on
• Closing down the connection
– Either side can close the connection
– … using the close() system call
• What about the data still “in flight”
– Data in flight still reaches the other end
– So, server can close() before client finishes reading
23
Putting it All Together
Server
socket()
bind()
Client
listen()
accept()
socket()
connect()
block
read()
process
request
write()
write()
read()
24
One Annoying Thing: Byte Order
• Hosts differ in how they store data
– E.g., four-byte number (byte3, byte2, byte1, byte0)
• Little endian (“little end comes first”): Intel x86’s
– Low-order byte stored at the lowest memory location
– Byte0, byte1, byte2, byte3
• Big endian (“big end comes first”)
– High-order byte stored at lowest memory location
– Byte3, byte2, byte1, byte 0
• Makes it more difficult to write portable code
– Client may be big or little endian machine
– Server may be big or little endian machine
25
Endian Example: Where is the Byte?
31
24
1
2
8 bits memory
1000
LittleEndian
78
23
16
3
4
8
5
6
16 bits Memory
+1
+0
1000
78
1004
1002
1004
1008
1003
1006
100C
78
1000
78
0
7
8
1000
1002
1000
7
32 bits Memory
+3 +2
+1
+0
1001
+0
BigEndian
15
+1
78
+0
+1
+2
+3
1000 78
1001
1002
1004
1002
1004
1008
1003
1006
100C
26
IP is Big Endian
• But, what byte order is used “on the wire”?
– Internet protocols picked convention: IP is big endian
– aka “network byte order”
• Writing portable code require conversion
– Use htons() and htonl() to convert to network byte order
– Use ntohs() and ntohl() to convert to host order
• Hides details of what kind of machine you’re on
– Use the system calls when sending/receiving data
structures longer than one byte
27
Using htonl and htons
int sockfd = // connected SOCK_STREAM
u_int32_t my_val = 1234;
u_int16_t my_xtra = 16;
u_short bufsize = sizeof (struct data_t);
char *buf = New char[bufsize];
bzero (buf, bufsize);
struct data_t *dat = (struct data_t *) buf;
dat->value = htonl (my_val);
dat->xtra = htons (my_xtra);
int rc = write (sockfd, buf, bufsize);
28
Why Can’t Sockets Hide These Details?
• Dealing with endian differences is tedious
– Couldn’t the socket implementation deal with this
– … by swapping the bytes as needed?
• No, swapping depends on the data type
– 2-byte short int: (byte 1, byte 0) vs. (byte 0, byte 1)
– 4-byte long int: (byte 3, … byte 0) vs. (byte 0, … byte 3)
– String of one-byte chars (char 0, char 1, char 2, …) in both
• Socket layer doesn’t know the data types
– Sees the data as simply a buffer pointer and a length
– Doesn’t have enough information to do the swapping
• Higher-layer with defined types can do this for you
– Java object serialization, RPC “marshalling”
29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement